Manuals+ — User Manuals Simplified.

HUANANZHI X99-F8 Motherboard User Manual

Home » HUANANZHI » HUANANZHI X99-F8 Motherboard User Manual

Contents
1 HUANANZHI X99-F8
Motherboard
2 Product Information
3 Product Usage Instructions
4 SAFETY PRECAUTIONS
5 PACKING
6 BRIEF INTRODUCTION
7 MOTHER BOARD IMAGE
8 Rear I/O Panel
9 Installation And Settings
10 Drivers installation
11 BIOS Settings
12 Documents / Resources
12.1 References
13 Related Posts

HUANANZHI X99-F8 Motherboard

 Product Information

Product: Motherboard
Manufacturer: SZ HUANAN SANXIAN TECHNOLOGY CO.,LTD.
Website: www.huananzhi.com
Supported CPU: LGA2011-3CPU
RAM: 8 x DIMM slots, supports up to 256GB DDR4 2400/2133/1866MHz ECC/ECC CPUDRAM
I/O: 6 x SATA3.0(6GB/s), 2 x SSATA3.0, 4 x USB2.0, 4 x USB3.0, 1 x PS/2, 1 x RJ45, Realtek 7.1 audio,
Realtek LAN
Expansion Slots: 2 x PCIe 3.0 x16, 1 x PCIe 3.0 x4, 2 x PCIe 2.0 x1, 1 x M.2 NVME PCIe 3.0X4 (key
M)2242/2260/2280, 1 x M.2 NVME PCIe 2.0X4 (key M)2242/2260/2280

Product Usage Instructions

1. Ensure your CPU is compatible with the LGA2011-3CPU socket on the motherboard.
2. Insert RAM into the DIMM slots, ensuring they are securely in place and aligned correctly.
3. Connect SATA devices to the SATA3.0 or SSATA3.0 ports on the motherboard.
4. Connect USB devices to the USB2.0 or USB3.0 ports on the motherboard.
5. Connect a PS/2 keyboard and/or mouse to the respective port on the motherboard.
6. Connect an Ethernet cable to the RJ45 port on the motherboard for LAN connection.
7. Install expansion cards into the PCIe or M.2 slots on the motherboard.
8. Connect the power switch, reset switch, HDD LED, and power LED to the respective pins on the F_PANEL1
header on the motherboard.
9. Connect audio devices to the Realtek 7.1 audio ports on the motherboard.
10. Install drivers for the motherboard and any connected devices.
11. Configure BIOS settings for optimal performance.

SAFETY PRECAUTIONS

Products could probably be damaged due to electrostatic discharge(ESD). Please follow these steps below for
a successful computer assembly.
Make sure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or
starting the computer.
In order to prevent products from being damaged by ESD, please make sure to discharge your body static by
touching other metal objects before taking the motherboard out of box.
Hold the border of motherboard when taking it out. Do not touch the sensitive parts of motherboard.
Please put the motherboard in an anti-static container or on anti-static pad if not needed .
Before turning on the computer, make sure all parts inside the case are firmly connected without any loose
screws or metal components.
Do not start the computer before installation finished, otherwise it might result in permanent damage to the
computer parts or even injury to the user.
If you need any assistance in the process of installation please contact our after-sales customer service or
reach us on HUANANZHI official Email: [email protected] for professional technical support.
Prior to installation or disassembly, please switch off the power and pull the power cable from the socket.
Keep the motherboard away from moisture.
Keep the user manual for future reference.
Before plugging the power supply, please make sure the socket provides the corresponding voltage.
In any of the following situations, please keep the mother -board and power cable in a safe place. Do not put
anything onto the power cable.
In the event of any of the following conditions, have the board checked by a service technician:
Liquid penetrated into the computer.
Motherboard is exposed to moisture.
Motherboard does not work even if you follow the instructions on user manual.
Motherboard fell off to the ground and got damaged.
Motherboard has clear signs of damage.

PACKING

Please confirm that the motherboard is properly packaged upon purchase of the product. If there is any damage
to packaging or lack of accessories, contact us as soon as
possible.

1.1*HUANANZHI X99-F8 Motherboard

2.2*SATA data cable
3.1*I/O shield back plat
4.1* User manual
5.1*Warranty card

BRIEF INTRODUCTION
Features
CPU

Intel® LGA2011-3Pin Processor Intel® Xeon™

Intel® LGA2011-3Pin Processor 5th6th Generation Intel® Core™

RAM

8*DIMM supports up to 256GB DDR4

2400/2133/1866MHZ Non-ECC.ECC memory
Quad-Channel Memory Architecture
Actual memory data rate depends on CPU type and DRAM module

I/O effects

6 x SATA3.0 (maximum transfer speed up to 6GB/s)

2 x SSATA3.0
4 x USB2.0 interface
4 x USB3.0 ports
1 x PS/2 Mouse and Keyboard port 1 x RJ45 Network card interface

Audio:

Realtek Audio Transcoder

Realtek 7.1 Surround Sound High Definition Audio Codec
Audio output: Front Out/Front Speaker Out Rear Speaker output Center/Subwoofer output Optical audio
output
Audio input: Microphone input Audio input

Ethernet: 1 x Realtek PCle Gigabit LAN

Expansion slot

2 x PCIe 3.0 x16

1 x PCIe 3.0×4
2 x PCIe 2.0 x1
1 x M.2 NVME PCIe 3.0X4 (key M)2242/2260/2280
1 x M.2 NVME PCIe 2.0X4 (key M)2242/2260/2280
MOTHER BOARD IMAGE

X99-F8 Motherboard Illustration

Rear I/O Panel

PS/2

Overall Rear I/O Panel Display

LAN Port Status Table

Audio Port Configuration

Installation And Settings

NOTICE

please check the motherboard where all pins marked with number “1” or white bold line are position “1”.
1. Remove the screw from the screw base
2. Remove the screw base

3. Tighten the screw base screwed into the length M.2 module to the M.2 interface distance hole
4. Insert your M.2 module into the M.2 interface at a 30 degree angle

5. Place the screw on the trailing edge notch of your M.2 module and tighten to the screw base

M.2 Interface Installation

1. Pull the clips on b oth ends of the memory slot outward, and the memory strip corresponds to the protruding
position of the slot to determine the direction of installation.
2. Align the memory module into the slot and press
3. Let the snaps on both ends of the slot automatically bounce

Memory Installation

1. Use a screwdriver to remove the bezel and screws on the main unit

2. Need to pick up the card slot of the card slot when installing the graphics card
3. Insert the graphics card into the card slot of the graphics card

4. After the installation is in place, the chuck will automatically return to its position.
5. Secure the graphics card to the chassis with screws
6. Install the power cord
Graphics Card Installation

Drivers installation

Drivers listing

Driver Directory Driver Description Operating System

X99-F8 Chipset Driver Intel chip information installation win7/win10

Realtek series sound card driver ins

X99-F8 Suond Card Driver win7/win10
tallation

Realtek network card driver installati

X99-F8 LAN Driver win7/win10
on

Intel Chip Information Installation

Run“ Control Panel – System – Hardware – Device Manager” Click the right mouse button to change the driver’s
hardware device and proceed with the installation below
Option: Propertyl – Update driverl – Not connect to Internet –
Manually installation
Find the corresponding directory
Select “Next step”

Audio driver installation

Before this installation, please check the model of the audio chip on the motherboard first(you may refer to this
manual), Select the proper driver accordingly for installa-tion.

Audio driver installation (take HD Audio series for example)

Run “driver installer”: /X99-F8Audio DRIVER/0003-64bit_Win7_Win8 _Win81_R276.exe
Click on “next”to continue,and then”finished”
The system will automatically restart itself to finish the installation

Uninstallation of audio driver(take HD Audio series for example)

Setting into Windows desktop, choose “setting”/ “control”,and then “add/remove programs”. Later, choose
“Realtek High Definition Audio Driver” in the menu and click on “add/re-move”so thatthe driver will be automatically
removed.

Driver installation of external video card

Run “driver installer”, take Setup.exe, Click on “next”- “yes”

-“next”
-“next”and”finished”h
The system will automatically search for devices to complete the installation

Driver installation of network

Run “driver installer”: X99-F8 LAN DRIVER /Install_Win7_7126

_06242019/Install_Win10_10035_06242019/setup.exe click on “next”-
“installation”- “finished”and restart the computer and restart the computer The system will automatically search for
devices to complete the installation.

BIOS Settings

In order to enable the computer to work well or execute specific functions, CMOS SETUP normally stores all kinds
of data in CMOS SRAM of the motherboard. When the computer is shut down, motherboard’s battery will supply
power to CMOS SRAM. When the computer is turned on and starts POST(Power On Self Test), press
“Delete/Del” key to enter into AMI BIOS CMOS SETUP main page. Motherboard warm boot key is “F7”.
Menu: please pay attention to every option in the settings menu. When there is a triangle shaped symbol on the
left side of menu, it means that you choose this sub-menu,so a pop-up sub-menu will be available.

Main Menu Function

Main Advanced Chipset Boot Security Save Exit

Main
System Overview
Date/Time settings, HDD specs/Monitor type settings.
Advanced
 Advanced Settings
BIOS special function settings, such as virus alert, booting disk priority etc.
Chipest
Advanced Chipest Settings
Boot
Boot Settings
Security
Security Settings
Save
Save Setting
Exit
Exit Options

Exit settings include loading of optimized defaults value/ loading of fail-safe defaults / discarding changes/ exiting
without saving.Exit settings include loading of optimized defaults value/ loading of fail-safe defaults / discarding
chang -es/ exiting without saving.

SZ HUANAN SANXIAN TECHNOLOGY CO.,LTD.

WWW.HUANANZHI.COM

Documents / Resources

HUANANZHI X99-F8 Motherboard [pdf] User Manual

X99-F8 Motherboard, X99-F8, Motherboard

References

Manuals+,