RESUME

Vitthal C.Deokate
At/p-Katewadi, Baramati,
Pune.
Contact No.- 8766794172
Email:[email protected]

Personal Details
Date of Birth : 03/11/1985
Marital Status : Married
Gender : Male
Language Known: English, Hindi & Marathi.
Career Objective:
Intended to build career with leading corporate environment with dedicated people,
which will help me to boost up my potentials. Willing to work in a challenging &
creative environment .
Educational Qualification:

Sr.No. Exam Passed Year of Passing University Percentage

1 S.S.C. 2002 Pune 54.53%
2 H.S.C.(Science) 2005 Pune 60.83%
3 DME(MECH) 2014 YCMOU,Nashik 52.90%

Professional Qualification:

Sr.No. Method Qualification

1 Radiography Testing(RT) BARC Level II (RSO)
2 Visual Testing (VT) ASNT Level II
3 Liquid Penetrant Testing(PT) ASNT Level II
4 Magnetic Particle Testing (MPT) ASNT Level II
5 Radiography Testing(RT) ASNT Level II
6 Ultrasonic Testing(UT) ASNT Level II
7 Leak Testing (LT ) ASNT Level II
Work Summary:
QA/QC, & NDT Engineer, Radiation Safety officer over 11 years of work experience in Welding & NDT in Pressure vessels, Boilers
& Piping Inspection. Ensuring compliance to quality standards and maintaining all related documents.QC activities related to
Fabrication/NDT/ Welding of Piping, Pressure Vessels in accordance with ASME Sec. I, ASME B31.1, B31.3, ASME Sec. VIII Div.
1 & Project specification, welding as per ASME Sec. IX and NDT as per ASME Sec. V. Responsible for the NDT operations for
which qualified and assigned and capable of interpreting and evaluating results in terms of existing codes, standards, and
specifications. Materials Handled:SA516 Gr.70,SA210 Gr.A1, SA240 TP 304/304L/316/316L, SA106 Gr. B, SA213 Gr. T-11/T-
22/T-91, BS 3059 Gr.360 Pt. II , SA 335 P11 , P22, SA234WPB , WP11 CL2 , WP22 Cl3, SA387 Gr. 11 Cl.2 , Gr.22 Cl2
,MDN250,15CDV6.
 Work Experience:-
1. Employer : Thermax Ltd (Through contract basis ) Pune, From 22/02/2007 to 11/03/2010
Company profile-.Manufacturer of High Pressure boiler, power plant, Heater and cooler maker
Designation: NDT Technician
Responsibilities:
1.Responsible for doing Magnetic particle testing, Penetrate testing of heat recovery steam
generator module
2.Responsible for Radiographic interpretation of butt weld joints in Tube, Pipe, Plate.
3.Responsible for Doing ultrasonic testing in butt weld joints, plates.
4.Preparation of RT,UT,MPT,PT reports.
5.To Conduct Positive material Identification (PMI)
2.Employer : Hi-TECH Engg. Corporation India Pvt. Ltd.,Baramati 12/03/2010 To 28.12.2016
Company Profile: Manufacturer of High Pressure Boilers & piping required for Power plants
Designation:- NDT Engineer
Responsibilities:-
1.Inspection of pressure vessel, boilers and piping.
2.Inward raw material inspection, Verification of Test certificate(MTC).
3.Carry out calibration of all NDT machine ,ensure proper and accurate calibration of testing
equipment.
4.Daily NDT(RT,UT,PT,MT) work planning through - Job scheduling, capacity planning
(utilization of man and machine Resources) and Monitoring of Job progress.
5.Coordinating with third party inspection agencies like Lloyds, IBR for witness, NDE
clearances / acceptance.
6.Preparation of NDT (RT,UT,PT,MT) Report, NDE plan, Weld Map,
7.NDT Documentation control to meet the ISO Requirements.
8.Review all the drawings and verify the stages of NDE with the QAP
9.Maintain and prepare daily NDE defect sheet and NDE status for each project
10.Review and take decision regarding all problem areas like Radiographic Testing (RT)
repairs, Ultrasonic Testing (UT) repairs
11.Develop NDT Procedures as per the client requirements, applicable Industry
Standards and Specification.(ASME Section V,ASME Section VIII Div.1, ASME Section I ).
3. Employer: KAY BOUVET ENGINEERING LIMITED, Satara from 01/01/2017 To 09.03.2017
 Company Profile:- Manufacturer of heat exchanger, Nuclear components, Aerospace motors
Sugar Plants, Boilers)
Designation: Q.C.Engineer (Radiation safety officer)
Responsibilities:-
1. All AERB Related Activities through E-Lora
2. Review of Radiographic films.
3. Monitor the already existing NDT procedures and propose changes to Materials if any.
4. Prepare the NDT Reports/Review Interpretation for RT, PT, MPT, UT as per the existing
Codes, Standards & specifications.(ASME Section VIII Div.1,ASME Section V )
5. Plan and Deploy resources for NDT activities.
6. Monitor day to day NDT activities
7. Calibration of NDT equipment
8. Working as Radiation safety officer.

4. Employer: Walchandnagar Industries Limited ,Walchandnagar From 10/03/2017 To 24.10.2017

Company Profile:- Manufacturer of heat exchanger, Nuclear components, Aerospace motors
,Missile, Sugar Plants, Boilers)
Designation:Q.C.Engineer
Responsibilities:-
1. Responsible for Mechanical testing like Tensile Test , Hardness Test,Fracture Toughness
Test(FTT)
2.Responsible for Strain Gauging for Hydro test of Aerospace Motors(NEG).
3. Preparation of Tensile Test ,Hardness Test Reports on ISRO,VSSC
Website(Q.C.Automations).
5. Employer:Hi-TECH Engg. Corporation India Pvt. Ltd.,Baramati 01/11/2017 To 31/03/2018
Company Profile: manufacturer of High Pressure Boilers & piping required for Power
Designation:- Quality Engineer
Responsibilities:-
1.Inspection of boilers Pressure parts and piping ,Inward Raw Material
2.Preparation of Dimensional Inspection Report and Verification of Test certificate(MTC).
3. Preparation of WPS, PQR & WPQR as per ASME SEC. IX
4. Quality Control Activities & Documentation using codes and standards like ASME Section
VIII Division 1 ASME Section II Part A, & C, ASME Section IX and ASME B31.3.
5.Carry out calibration of all NDT machine ,ensure proper and accurate calibration of testing
equipment.
6.Daily NDT(RT,UT,PT,MT) work planning through - Job scheduling, capacity planning
 (utilization of man and machine Resources) and Monitoring of Job progress.
7.Coordinating with third party inspection agencies like Lloyds,IBR for witness, NDE
clearances / acceptance.
8.Preparation of NDT (RT,UT,PT,MT) Report, NDE plan, Weld Map,
9.NDT Documentation control to meet the ISO Requirements.
10.Review all the drawings and verify the stages of NDE with the QAP (Quality Assurance
Plan)
11.Develop NDT Procedures as per the client requirements, applicable Industry
Standards and Specification.
12.AERB e-Lora activities for Radiation Safety.
13.Monitoring & control of welding activities on shop floor

6. Employer: Hallmark Boilers Pvt.Ltd,Baramati From 01/05/2018 To 25/08/2019

Company Profile: Manufacturer of High Pressure Boilers & piping required for Power plants
Designation:- Quality Engineer Final inspection of the completed assemblies.
Responsibilities:-
1.Carrying out Fit-Up, Weld Visual & Dimensional Inspection.
2.Issuing Inspection reports & release notes.
3.Coordinating with TPI agency for inspections..
4.Preparation of NDT procedures.
5.Monitoring welding consumables, PWHT & NDE.
6.Monitoring of Welding activities as per approved WPS
7.Review of Radiographic films.
8.Monitor the already existing NDT procedures and propose changes to Materials if any.
9.Prepare the NDT Reports/Review Interpretation for RT, PT, MPT, UT as per the existing
Codes, Standards & specifications.(ASME Section VIII Div.1,ASME Section V )
10. Plan and Deploy resources for NDT activities.
11.Review and approve NDT reports.
12.Monitor day to day NDT activities
13.Calibration of NDT equipment
14.Implementation of new NDT techniques
15.Raw Material Inspection & MTC review

7. Employer: Godrej & Boyce Mfg.Co.Ltd,(PED), Mumbai . From 27/08/2019 To 25 /11/2019

 Company Profile: Manufacturer of Pressure Vessels.
Designation:-Senior Technical Staff Associates (Site-In-charge-Radiation safety officer)
Responsibilities:
1. Coordinating with TPI agency for inspections (NPCIL, VSSC, TUV-SUD, Tata Projects).
2. Preparation of NDT procedures.
3. Review of Radiographic films.
4. Monitor the already existing NDT procedures and propose changes to Materials if any.
5. Prepare the NDT Reports/Review Interpretation for RT, PT, MPT, UT as per the existing
Codes, Standards & specifications.(ASME Section VIII Div.1,ASME Section V )
6. Plan and Deploy resources for NDT activities.
7. Monitor day to day NDT activities
8. Calibration of NDT equipment
9. Working as Radiation safety officer.

8. Employer: Walchandnagar Industries Limited , From 01/10/2021 To 23.03.2022

Company Profile:- Manufacturer of heat exchanger, Nuclear components, Aerospace

motors, Missile, Sugar Plants, Boilers)
Designation: NDT Engineer (Radiation Safety Officer)
Responsibility:-
1.All AERB Related activity through E-lora (work as licenses & Radiation safety officer)
2. Coordinating with TPI agency for inspections (NPCIL, VSSC, TUV-SUD, Tata Projects, DRDL ).
3. Preparation of NDT procedures of different projects like Defense job (Launcher
Container, Metallic canister, Model cart, Tri-sonic Test Section , Ejector Piping) .
4. Review of Radiographic films of different projects like PSO-XL, S-139,S-200,CLS
Container, Missile-Astra motors,L2 Motors, Akash missile (CC1,CC2).
5. Monitor the already existing NDT procedures and propose changes to Materials if any.
6. Prepare the NDT Reports/Review Interpretation for RT, PT, MPT, UT as per the existing
Codes, Standards & specifications.(ASME Section VIII Div.1,ASME Section V )
7. Plan and Deploy resources for NDT activities.
8. Monitor day to day NDT activities
9. Calibration of NDT equipment
9. Employer: Kay Bouvet Engineering Limited satara, From 07/04/2022 To Till Date

Company Profile:- Manufacturer of heat exchanger, Nuclear components, Aerospace motor

Sugar Plants, Boilers)
Designation: Radiation Safety Officer & Welding Engineer
Responsibility:-
1.All AERB Related activity through E-lora (work as licenses & Radiation safety officer)
2. Coordinating with TPI agency for inspections ( NPCIL, VSSC, TUV ).
3. Preparation of NDT procedures of different projects like Calandria, D2O Tanks, IGCAR,
Bramos.
4. Review of Radiographic films of different projects like PSO-XL, Calandria etc.
5. Monitor the already existing NDT procedures and propose changes to Materials if any.
6. Prepare the NDT Reports/Review Interpretation for RT, PT, MPT, UT as per the existing
Codes, Standards & specifications.(ASME Section VIII Div.1,ASME Section V )
7. Plan and Deploy resources for NDT activities.
8. Monitor day to day NDT activities
9. Calibration of NDT equipment
10. Preparation of WPS, POR & Welder Qualification.

Current Salary: - Rs-38000/- Per Month Gross salary, Package – 4.56 Lac.

Declaration:
I hereby declare that the above information is true up the best of my knowledge.

Place:Baramati Thanks and Regards,

Date:02/02/2023 Vitthal C.Deokate