Scribd
Upload
21 views7 pages

Open Ended Post Lab

The document describes an open-ended lab experiment on designing and verifying a resistive voltage divider circuit. Students were tasked with designing two circuits meeting given specifications and experimentally validating that the circuits satisfy the specs. The document provides circuit diagrams, operating point values, experimental data sheets, and analysis verifying the circuits meet the specifications for voltage values, current, power dissipation, and tolerance thresholds.

Uploaded by

2023-3-80-008
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
21 views7 pages

Open Ended Post Lab

The document describes an open-ended lab experiment on designing and verifying a resistive voltage divider circuit. Students were tasked with designing two circuits meeting given specifications and experimentally validating that the circuits satisfy the specs. The document provides circuit diagrams, operating point values, experimental data sheets, and analysis verifying the circuits meet the specifications for voltage values, current, power dissipation, and tolerance thresholds.

Uploaded by

2023-3-80-008
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

[Post Lab]

Course code: EEE 101 Section: 2

Exp. No.: 05
Exp. Name: Open Ended Lab on Design, Implementation and
Verification of a Resistive Voltage

Divider Circuit

St. Name: 1.Md.Bayazid Ahmmed


2.Shafyqul Islam
3.Rakibul Hasan
Group no.: 04
Partners’ (1)2023-3-80-008
IDs:
(2)2023-3-80-050

(3)2023-3-80-053

Date of 02-05-2024 Instructor’s


performance Comment and
: Signature:

Date of 07-05-2024
submission :

OBJECTIVES: The objectives of this open-ended experiment are twofold. • First, to design a
resistive voltage divider circuit subject to given specifications. • Second, to design and conduct
an experiment to verify whether the designed circuit satisfies
1.Circuit Diagram
Circuit No-1
--- Operating Point ---

V(n002): 12 voltage
V(n001): 11.9126 voltage
V(a): 8.93448 voltage
V(b): 5.95632 voltage
I(R1): 0.0397088 device_current
I(R5): 0.0198544 device_current
I(R6): 0.0198544 device_current
I(R2): 0.0198544 device_current
I(R3): 0.0198544 device_current
I(R4): 0.0198544 device_current
I(R7): 0.0198544 device_current
I(V1): -0.0397088 device_current

Fig 1:

CIRCUIT NO 2.
--- Operating Point ---

V(n001): 12 voltage
V(n002): 11.9121 voltage
V(a): 9.19387 voltage
V(n003): 7.31512 voltage
V(b): 5.996 voltage
I(R1): 0.0399734 device_current
I(R2): 0.0399734 device_current
I(R3): 0.0399734 device_current
I(R4): 0.0399734 device_current
I(R5): 0.0399734 device_current
I(V1): -0.0399734 device_current

Fig 2:

2. Submit the experimental datasheet:


3.Verify which specifications are satisfied by the experimental data .
Circuit-1
R1=5.50Ω R4=35Ω
R2=69.10Ω R5=151.13Ω
R3=49.21Ω R6=1kΩ

Spercification 1:
Va=9V error=0%<4%
Vb=6.08V error=1.33%<4%

Circuit-2:(For use load 1kΩ)


Spercification 2:
Va=8.7V
Vb=5.7V
Spercification 3:
∆Va=9-8.7 = 0.3V< 0.5V
∆Vb=6.08-5.7 =0.38V<0.5V

Circuit-3:(use load 1kΩ)


Spercification 4:
Va=8.7V
Vb=6.15V
∆Va=9-8.7 =0.3V<0.5V
∆ Vb=6.08-57 = 0.15V<.05V
Spercification 5:(Use multimeter)
Current:
I=0.036A
Rs=R2+R3+R4+R5
=69.19+49.21+35+151.13
=304.44Ω
P=I2R
=(0.036)2×304.44
=0.394W

Spercification 6:
P2= (0.036)2×69.10 = 0.08W
P3=(0.036)2×49.21 = 0.23W
P4=(0.036)2×35 = 0.04W
P5=(0.036)2×151.13 = 0.19W
So,all specifications are verified

4. Summarize we are learning from this open-ended experiment:


1. How to make a circuit .
2. Ltspice use .
3 . How to calculate voltage .
4. How to calculate power

You might also like