Page 1 of 29

SLAB DESIGN CALCULATIONS

Project Name : TWO STOREY RESIDENTIAL BUILDING
Client Name : GEMARIE V. REFORSADO
Engineer Name : ALLYSSA MAE B. BIRON & BRIAN BYRNE MILAY
Analysis File : C:\Users\brianbyrnemilay\Downloads\TWO-STOREY-
RESIDENTIAL-BLDG.std
Analysis Last Modified : 09/05/2024 5:03:25 pm

NOTES:
1. Density of concrete assumed as 25 kN/cum.

Definitions Of Terms: :
Ratio of flexural stiffness of beam section to flexural
1. αf =
stiffness of slab.
Ratio of torsional stiffness of edge beam section to
2. βt =
flexural stiffness of slab.
3. Φt = Strength reduction factor.
4. As = Area of Tension reinforcement required in 'sqmm'.
5. As,min = Min area of flexural reinforcement in 'sqmm'.
Area of longitudinal reinforcement provided at given
6. AstPrv =
section in 'sqmm'.
Total area of longitudinal reinforcement calculated at a
7. Ast =
given section in 'sqmm'.
8. b = Width of the Slab in 'mm'.
9. B1 to B4 = Width of beams around slab in 'mm'.
10. Cc = Effective Cover to tension reinforcement in 'mm'.
cross-sectional constant to define torsional properties
11. CA and CB =
of slab and beam.
12. deff = Effective depth of slab in 'mm'.
13. D1 to D4 = Depth of beams around slab.
14. Icr = Moment of Inertia of concrete crack section.
Length of clear span in direction that moment are
15. Ln =
being determined in 'mm'.
16. L2 = Length of adjacent span of Ln in 'mm'.
17. lb1 to lb2 = Moment of inertia of beams around slab in 'mm4'.
18. Mcr = Cracking Moment.
19. Mu = Factored Bending Moment at a section in 'kNm'.
20. Ptmin = Minimum percentage steel as per chapter 8.
21. PtPrv = Provided percentage steel.
22. Vc = Nominal shear strength provided by concrete in 'kN'.
23. Vu = Factored Shear Force at a section in 'kN'.
24. Vud = Design Shear Force in 'kN'.
25. y = Neutral axis depth.

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 2 of 29

Code References :
NSCP C101 - 2015

Item CLAUSE / TABLE

1. Ptmax : 407.3.3.1, 408.3.3.1, 409.3.3.1
2. Ptmin : 407.6.1.1 & 408.6.1.1/407.7.2.3
3. Vc : 422.6.5
4. Av : 422.5.10.5 & 422.6.7
5. Moment calculations : 408.10
6. spacing between main bars : 407.7.2
7. spacing between distribution bars : 407.7.6 & 408.7.2
8. Minimum reinforcement : 407.6.1 & 408.6.1
9. fs,perm : 424.3.2.1
10. fc,perm : A.3.1 (ACI 318-99)
11. Wcr : Eq 1-2 ( ACI 224R-01)

Slab No. : S1
Level = 1.5 m
Design Code = NSCP C101 - 2015
Grade Of Concrete = C21
Grade Of Steel = Fy414
Clear Cover = 20.000 mm
Long Span, Ly = 3.740 m
Short Span, Lx = 3.420 m
Imposed Load = 8.730 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 100.000 mm
Effective Depth Along LX, Deffx = 75.000 mm
Effective Depth Along LY, Deffy = 65.000 mm
Self Weight = 2.500 kN/sqm
Total Load, TL (ultimate) = 16.520 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
B (mm) 200 200 200 200
D (mm) 300 300 300 300
Ib (mm4) x106 450 450 450 450

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 3 of 29

Adjacent Slab
Thk (mm) 100 - - 100
Span (mm) 2900 - - 3700
Ib (mm4) x106 263.33 142.5 155.83 310
αf lx, αf ly 1.71 3.16 2.89 1.45
αf 2.3
Ln (mm) 3220 3540
L2 (mm) 1970 1810
Effective Width (mm) 935 855
Ly/Lx Lx/Ly
1.09 0.91
Total BM (kNm) 42.17 46.83
Bottom
Moment Co-efficent 0.57 0.57
Distributed Moment (kNm) 24.04 26.69
Moment factor for CS 0.722 0.776
CS Moment (kNm) 17.35 20.7
MS Moment (kNm) 6.68 5.99
Moment on Beam (kNm) 14.75 17.6
Design Moment M1, M3 (kNm) 6.68 5.99
Top
Moment Co-efficent 0.7 0.7
Distributed Moment (kNm) 29.52 32.78
Moment factor for CS 0.722 0.776
CS Moment (kNm) 21.31 25.43
MS Moment (kNm) 8.21 7.35
Moment on Beam (kNm) 18.11 21.61
Design Moment M2, M4 (kNm) 8.21 7.35

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 6.680 kNm
M1 (per m) = M1/Effective
Width
= 7.150 kNm/m
Area Of Reinforcement = 267.000 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 8.210 kNm
M2/Effective
M2 (per m) =
Width
= 8.780 kNm/m
Area Of Reinforcement = 331.390 sqmm/m
Required (BM)

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 4 of 29

Reinforcement Provided = #10 @ 200 C/C

= 393.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 5.990 kNm
M3/Effective
M3 (per m) =
Width
= 7.000 kNm/m
Area Of Reinforcement = 306.140 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 7.350 kNm
M4/Effective
M4 (per m) =
Width
= 8.600 kNm/m
Area Of Reinforcement = 381.480 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = #10 @ 300 C/C
= 262.000 sqmm/m

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 5 of 29

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 14.120 kN
Nominal Shear, ΦVc = 43.490 kN
> 14.120 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x = 15.330 kN
(1 - (Lx / (2 x Ly))))
Nominal Shear, ΦVc = 37.690 kN
> 15.330 Slab Is Safe In Shear

Slab No. : S2
Level = 1.5 m
Design Code = NSCP C101 - 2015
Grade Of Concrete = C21
Grade Of Steel = Fy414
Clear Cover = 20.000 mm
Long Span, Ly = 3.740 m
Short Span, Lx = 2.900 m
Imposed Load = 8.730 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 100.000 mm
Effective Depth Along LX, Deffx = 75.000 mm
Effective Depth Along LY, Deffy = 65.000 mm
Self Weight = 2.500 kN/sqm
Total Load, TL (ultimate) = 16.520 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
B (mm) 200 200 200 200
D (mm) 300 300 300 300
Ib (mm4) x106 450 450 450 450
Adjacent Slab
Thk (mm) 100 100 - 100
Span (mm) 2860 3420 - 3700
Ib (mm4) x106 240 263.33 155.83 310
αf lx, αf ly 1.88 1.71 2.89 1.45
αf 1.98

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 6 of 29

Ln (mm) 2700 3540

L2 (mm) 1970 1550
Effective Width (mm) 935 725
Ly/Lx Lx/Ly
1.29 0.78
Total BM (kNm) 29.65 40.1
Bottom
Moment Co-efficent 0.35 0.57
Distributed Moment (kNm) 10.38 22.86
Moment factor for CS 0.663 0.817
CS Moment (kNm) 6.88 18.68
MS Moment (kNm) 3.5 4.17
Moment on Beam (kNm) 5.85 15.88
Design Moment M1, M3 (kNm) 3.5 4.17
Top
Moment Co-efficent 0.65 0.7
Distributed Moment (kNm) 19.27 28.07
Moment factor for CS 0.663 0.817
CS Moment (kNm) 12.78 22.94
MS Moment (kNm) 6.49 5.13
Moment on Beam (kNm) 10.86 19.5
Design Moment M2, M4 (kNm) 6.49 5.13

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 3.500 kNm
M1 (per m) = M1/Effective
Width
= 3.740 kNm/m
Area Of Reinforcement = 180.000 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 6.490 kNm
M2/Effective
M2 (per m) =
Width
= 6.940 kNm/m
Area Of Reinforcement = 259.020 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 4.170 kNm
M3/Effective
M3 (per m) =
Width

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 7 of 29

= 5.760 kNm/m
Area Of Reinforcement = 248.960 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 5.130 kNm
M4/Effective
M4 (per m) =
Width
= 7.070 kNm/m
Area Of Reinforcement = 309.280 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = #10 @ 300 C/C
= 262.000 sqmm/m

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 8 of 29

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 11.970 kN
Nominal Shear, ΦVc = 43.490 kN
> 11.970 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x = 14.660 kN
(1 - (Lx / (2 x Ly))))
Nominal Shear, ΦVc = 37.690 kN
> 14.660 Slab Is Safe In Shear

Slab No. : S3
Level = 1.5 m
Design Code = NSCP C101 - 2015
Grade Of Concrete = C21
Grade Of Steel = Fy414
Clear Cover = 20.000 mm
Long Span, Ly = 3.740 m
Short Span, Lx = 2.860 m
Imposed Load = 8.730 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 100.000 mm
Effective Depth Along LX, Deffx = 75.000 mm
Effective Depth Along LY, Deffy = 65.000 mm
Self Weight = 2.500 kN/sqm
Total Load, TL (ultimate) = 16.520 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
B (mm) 200 200 200 200
D (mm) 300 300 300 300
Ib (mm4) x106 450 450 450 450
Adjacent Slab
Thk (mm) - 100 - 100
Span (mm) - 2900 - 3700
Ib (mm4) x106 119.17 240 155.83 310
αf lx, αf ly 3.78 1.88 2.89 1.45
αf 2.5

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 9 of 29

Ln (mm) 2660 3540

L2 (mm) 1970 1530
Effective Width (mm) 935 715
Ly/Lx Lx/Ly
1.31 0.76
Total BM (kNm) 28.78 39.58
Bottom
Moment Co-efficent 0.57 0.57
Distributed Moment (kNm) 16.4 22.56
Moment factor for CS 0.658 0.821
CS Moment (kNm) 10.79 18.51
MS Moment (kNm) 5.61 4.05
Moment on Beam (kNm) 9.17 15.74
Design Moment M1, M3 (kNm) 5.61 4.05
Top
Moment Co-efficent 0.7 0.7
Distributed Moment (kNm) 20.14 27.71
Moment factor for CS 0.658 0.821
CS Moment (kNm) 13.25 22.74
MS Moment (kNm) 6.9 4.97
Moment on Beam (kNm) 11.26 19.33
Design Moment M2, M4 (kNm) 6.9 4.97

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 5.610 kNm
M1 (per m) = M1/Effective
Width
= 6.010 kNm/m
Area Of Reinforcement = 222.680 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 6.900 kNm
M2/Effective
M2 (per m) =
Width
= 7.370 kNm/m
Area Of Reinforcement = 275.850 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 4.050 kNm
M3/Effective
M3 (per m) =
Width

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 10 of 29

= 5.660 kNm/m
Area Of Reinforcement = 244.600 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 4.970 kNm
M4/Effective
M4 (per m) =
Width
= 6.950 kNm/m
Area Of Reinforcement = 303.800 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = #10 @ 300 C/C
= 262.000 sqmm/m

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 11 of 29

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 11.810 kN
Nominal Shear, ΦVc = 43.490 kN
> 11.810 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x = 14.590 kN
(1 - (Lx / (2 x Ly))))
Nominal Shear, ΦVc = 37.690 kN
> 14.590 Slab Is Safe In Shear

Slab No. : S4
Level = 1.5 m
Design Code = NSCP C101 - 2015
Grade Of Concrete = C21
Grade Of Steel = Fy414
Clear Cover = 20.000 mm
Long Span, Ly = 3.700 m
Short Span, Lx = 3.420 m
Imposed Load = 8.730 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 100.000 mm
Effective Depth Along LX, Deffx = 75.000 mm
Effective Depth Along LY, Deffy = 65.000 mm
Self Weight = 2.500 kN/sqm
Total Load, TL (ultimate) = 16.520 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
B (mm) 200 200 200 200
D (mm) 300 300 300 300
Ib (mm4) x106 450 450 450 450
Adjacent Slab
Thk (mm) 100 - 100 100
Span (mm) 2900 - 3740 3720
Ib (mm4) x106 263.33 142.5 310 309.17
αf lx, αf ly 1.71 3.16 1.45 1.46
αf 1.94

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 12 of 29

Ln (mm) 3220 3500

L2 (mm) 1950 1810
Effective Width (mm) 925 855
Ly/Lx Lx/Ly
1.08 0.92
Total BM (kNm) 41.74 45.78
Bottom
Moment Co-efficent 0.57 0.35
Distributed Moment (kNm) 23.79 16.02
Moment factor for CS 0.725 0.773
CS Moment (kNm) 17.26 12.38
MS Moment (kNm) 6.53 3.64
Moment on Beam (kNm) 14.67 10.52
Design Moment M1, M3 (kNm) 6.53 3.64
Top
Moment Co-efficent 0.7 0.65
Distributed Moment (kNm) 29.22 29.75
Moment factor for CS 0.725 0.773
CS Moment (kNm) 21.2 22.99
MS Moment (kNm) 8.02 6.76
Moment on Beam (kNm) 18.02 19.54
Design Moment M2, M4 (kNm) 8.02 6.76

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 6.530 kNm
M1 (per m) = M1/Effective
Width
= 7.060 kNm/m
Area Of Reinforcement = 263.630 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 8.020 kNm
M2/Effective
M2 (per m) =
Width
= 8.670 kNm/m
Area Of Reinforcement = 327.160 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 3.640 kNm
M3/Effective
M3 (per m) =
Width

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 13 of 29

= 4.260 kNm/m
Area Of Reinforcement = 181.850 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 6.760 kNm
M4/Effective
M4 (per m) =
Width
= 7.910 kNm/m
Area Of Reinforcement = 348.620 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = #10 @ 300 C/C
= 262.000 sqmm/m

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 14 of 29

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 14.120 kN
Nominal Shear, ΦVc = 43.490 kN
> 14.120 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x = 15.190 kN
(1 - (Lx / (2 x Ly))))
Nominal Shear, ΦVc = 37.690 kN
> 15.190 Slab Is Safe In Shear

Slab No. : S5
Level = 1.5 m
Design Code = NSCP C101 - 2015
Grade Of Concrete = C21
Grade Of Steel = Fy414
Clear Cover = 20.000 mm
Long Span, Ly = 3.700 m
Short Span, Lx = 2.900 m
Imposed Load = 8.730 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 100.000 mm
Effective Depth Along LX, Deffx = 75.000 mm
Effective Depth Along LY, Deffy = 65.000 mm
Self Weight = 2.500 kN/sqm
Total Load, TL (ultimate) = 16.520 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
B (mm) 200 200 200 200
D (mm) 300 300 300 300
Ib (mm4) x106 450 450 450 450
Adjacent Slab
Thk (mm) 100 100 100 100
Span (mm) 2860 3420 3740 3720
Ib (mm4) x106 240 263.33 310 309.17
αf lx, αf ly 1.88 1.71 1.45 1.46
αf 1.62

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 15 of 29

Ln (mm) 2700 3500

L2 (mm) 1950 1550
Effective Width (mm) 925 725
Ly/Lx Lx/Ly
1.28 0.78
Total BM (kNm) 29.35 39.2
Bottom
Moment Co-efficent 0.35 0.35
Distributed Moment (kNm) 10.27 13.72
Moment factor for CS 0.667 0.815
CS Moment (kNm) 6.85 11.18
MS Moment (kNm) 3.42 2.54
Moment on Beam (kNm) 5.83 9.5
Design Moment M1, M3 (kNm) 3.42 2.54
Top
Moment Co-efficent 0.65 0.65
Distributed Moment (kNm) 19.08 25.48
Moment factor for CS 0.667 0.815
CS Moment (kNm) 12.73 20.76
MS Moment (kNm) 6.35 4.72
Moment on Beam (kNm) 10.82 17.65
Design Moment M2, M4 (kNm) 6.35 4.72

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 3.420 kNm
M1 (per m) = M1/Effective
Width
= 3.700 kNm/m
Area Of Reinforcement = 180.000 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 6.350 kNm
M2/Effective
M2 (per m) =
Width
= 6.860 kNm/m
Area Of Reinforcement = 255.850 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 2.540 kNm
M3/Effective
M3 (per m) =
Width

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 16 of 29

= 3.500 kNm/m
Area Of Reinforcement = 180.000 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 4.720 kNm
M4/Effective
M4 (per m) =
Width
= 6.510 kNm/m
Area Of Reinforcement = 283.180 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = #10 @ 300 C/C
= 262.000 sqmm/m

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 17 of 29

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 11.970 kN
Nominal Shear, ΦVc = 43.490 kN
> 11.970 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x = 14.560 kN
(1 - (Lx / (2 x Ly))))
Nominal Shear, ΦVc = 37.690 kN
> 14.560 Slab Is Safe In Shear

Slab No. : S6
Level = 1.5 m
Design Code = NSCP C101 - 2015
Grade Of Concrete = C21
Grade Of Steel = Fy414
Clear Cover = 20.000 mm
Long Span, Ly = 3.700 m
Short Span, Lx = 2.860 m
Imposed Load = 8.730 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 100.000 mm
Effective Depth Along LX, Deffx = 75.000 mm
Effective Depth Along LY, Deffy = 65.000 mm
Self Weight = 2.500 kN/sqm
Total Load, TL (ultimate) = 16.520 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
B (mm) 200 200 200 200
D (mm) 300 300 300 300
Ib (mm4) x106 450 450 450 450
Adjacent Slab
Thk (mm) - 100 100 100
Span (mm) - 2900 3740 3720
Ib (mm4) x106 119.17 240 310 309.17
αf lx, αf ly 3.78 1.88 1.45 1.46
αf 2.14

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 18 of 29

Ln (mm) 2660 3500

L2 (mm) 1950 1530
Effective Width (mm) 925 715
Ly/Lx Lx/Ly
1.29 0.77
Total BM (kNm) 28.48 38.69
Bottom
Moment Co-efficent 0.57 0.35
Distributed Moment (kNm) 16.24 13.54
Moment factor for CS 0.662 0.818
CS Moment (kNm) 10.75 11.08
MS Moment (kNm) 5.49 2.46
Moment on Beam (kNm) 9.13 9.42
Design Moment M1, M3 (kNm) 5.49 2.46
Top
Moment Co-efficent 0.7 0.65
Distributed Moment (kNm) 19.94 25.15
Moment factor for CS 0.662 0.818
CS Moment (kNm) 13.2 20.58
MS Moment (kNm) 6.74 4.57
Moment on Beam (kNm) 11.22 17.49
Design Moment M2, M4 (kNm) 6.74 4.57

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 5.490 kNm
M1 (per m) = M1/Effective
Width
= 5.930 kNm/m
Area Of Reinforcement = 219.970 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 6.740 kNm
M2/Effective
M2 (per m) =
Width
= 7.290 kNm/m
Area Of Reinforcement = 272.470 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 2.460 kNm
M3/Effective
M3 (per m) =
Width

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 19 of 29

= 3.450 kNm/m
Area Of Reinforcement = 180.000 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 4.570 kNm
M4/Effective
M4 (per m) =
Width
= 6.400 kNm/m
Area Of Reinforcement = 278.210 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = #10 @ 300 C/C
= 262.000 sqmm/m

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 20 of 29

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 11.810 kN
Nominal Shear, ΦVc = 43.490 kN
> 11.810 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x = 14.490 kN
(1 - (Lx / (2 x Ly))))
Nominal Shear, ΦVc = 37.690 kN
> 14.490 Slab Is Safe In Shear

Slab No. : S7
Level = 1.5 m
Design Code = NSCP C101 - 2015
Grade Of Concrete = C21
Grade Of Steel = Fy414
Clear Cover = 20.000 mm
Long Span, Ly = 3.720 m
Short Span, Lx = 3.420 m
Imposed Load = 8.730 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 100.000 mm
Effective Depth Along LX, Deffx = 75.000 mm
Effective Depth Along LY, Deffy = 65.000 mm
Self Weight = 2.500 kN/sqm
Total Load, TL (ultimate) = 16.520 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
B (mm) 200 200 200 200
D (mm) 300 300 300 300
Ib (mm4) x106 450 450 450 450
Adjacent Slab
Thk (mm) 100 - 100 -
Span (mm) 2900 - 3700 -
Ib (mm4) x106 263.33 142.5 309.17 155
αf lx, αf ly 1.71 3.16 1.46 2.9
αf 2.31

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 21 of 29

Ln (mm) 3220 3520

L2 (mm) 1960 1810
Effective Width (mm) 930 855
Ly/Lx Lx/Ly
1.09 0.92
Total BM (kNm) 41.95 46.3
Bottom
Moment Co-efficent 0.57 0.57
Distributed Moment (kNm) 23.91 26.39
Moment factor for CS 0.724 0.774
CS Moment (kNm) 17.31 20.43
MS Moment (kNm) 6.61 5.96
Moment on Beam (kNm) 14.71 17.37
Design Moment M1, M3 (kNm) 6.61 5.96
Top
Moment Co-efficent 0.7 0.7
Distributed Moment (kNm) 29.37 32.41
Moment factor for CS 0.724 0.774
CS Moment (kNm) 21.25 25.09
MS Moment (kNm) 8.11 7.32
Moment on Beam (kNm) 18.07 21.33
Design Moment M2, M4 (kNm) 8.11 7.32

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 6.610 kNm
M1 (per m) = M1/Effective
Width
= 7.110 kNm/m
Area Of Reinforcement = 265.310 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 8.110 kNm
M2/Effective
M2 (per m) =
Width
= 8.730 kNm/m
Area Of Reinforcement = 329.270 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 5.960 kNm
M3/Effective
M3 (per m) =
Width

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 22 of 29

= 6.970 kNm/m
Area Of Reinforcement = 304.590 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 7.320 kNm
M4/Effective
M4 (per m) =
Width
= 8.560 kNm/m
Area Of Reinforcement = 379.510 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = #10 @ 300 C/C
= 262.000 sqmm/m

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 23 of 29

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 14.120 kN
Nominal Shear, ΦVc = 43.490 kN
> 14.120 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x = 15.260 kN
(1 - (Lx / (2 x Ly))))
Nominal Shear, ΦVc = 37.690 kN
> 15.260 Slab Is Safe In Shear

Slab No. : S8
Level = 1.5 m
Design Code = NSCP C101 - 2015
Grade Of Concrete = C21
Grade Of Steel = Fy414
Clear Cover = 20.000 mm
Long Span, Ly = 3.720 m
Short Span, Lx = 2.900 m
Imposed Load = 8.730 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 100.000 mm
Effective Depth Along LX, Deffx = 75.000 mm
Effective Depth Along LY, Deffy = 65.000 mm
Self Weight = 2.500 kN/sqm
Total Load, TL (ultimate) = 16.520 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
B (mm) 200 200 200 200
D (mm) 300 300 300 300
Ib (mm4) x106 450 450 450 450
Adjacent Slab
Thk (mm) 100 100 100 -
Span (mm) 2860 3420 3700 -
Ib (mm4) x106 240 263.33 309.17 155
αf lx, αf ly 1.88 1.71 1.46 2.9
αf 1.99

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 24 of 29

Ln (mm) 2700 3520

L2 (mm) 1960 1550
Effective Width (mm) 930 725
Ly/Lx Lx/Ly
1.28 0.78
Total BM (kNm) 29.5 39.65
Bottom
Moment Co-efficent 0.35 0.57
Distributed Moment (kNm) 10.32 22.6
Moment factor for CS 0.665 0.816
CS Moment (kNm) 6.87 18.44
MS Moment (kNm) 3.46 4.16
Moment on Beam (kNm) 5.84 15.68
Design Moment M1, M3 (kNm) 3.46 4.16
Top
Moment Co-efficent 0.65 0.7
Distributed Moment (kNm) 19.17 27.75
Moment factor for CS 0.665 0.816
CS Moment (kNm) 12.75 22.65
MS Moment (kNm) 6.42 5.1
Moment on Beam (kNm) 10.84 19.25
Design Moment M2, M4 (kNm) 6.42 5.1

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 3.460 kNm
M1 (per m) = M1/Effective
Width
= 3.720 kNm/m
Area Of Reinforcement = 180.000 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 6.420 kNm
M2/Effective
M2 (per m) =
Width
= 6.900 kNm/m
Area Of Reinforcement = 257.430 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 4.160 kNm
M3/Effective
M3 (per m) =
Width

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 25 of 29

= 5.730 kNm/m
Area Of Reinforcement = 247.780 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 5.100 kNm
M4/Effective
M4 (per m) =
Width
= 7.040 kNm/m
Area Of Reinforcement = 307.800 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = #10 @ 300 C/C
= 262.000 sqmm/m

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 26 of 29

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 11.970 kN
Nominal Shear, ΦVc = 43.490 kN
> 11.970 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x = 14.610 kN
(1 - (Lx / (2 x Ly))))
Nominal Shear, ΦVc = 37.690 kN
> 14.610 Slab Is Safe In Shear

Slab No. : S9
Level = 1.5 m
Design Code = NSCP C101 - 2015
Grade Of Concrete = C21
Grade Of Steel = Fy414
Clear Cover = 20.000 mm
Long Span, Ly = 3.720 m
Short Span, Lx = 2.860 m
Imposed Load = 8.730 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 100.000 mm
Effective Depth Along LX, Deffx = 75.000 mm
Effective Depth Along LY, Deffy = 65.000 mm
Self Weight = 2.500 kN/sqm
Total Load, TL (ultimate) = 16.520 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
B (mm) 200 200 200 200
D (mm) 300 300 300 300
Ib (mm4) x106 450 450 450 450
Adjacent Slab
Thk (mm) - 100 100 -
Span (mm) - 2900 3700 -
Ib (mm4) x106 119.17 240 309.17 155
αf lx, αf ly 3.78 1.88 1.46 2.9
αf 2.5

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 27 of 29

Ln (mm) 2660 3520

L2 (mm) 1960 1530
Effective Width (mm) 930 715
Ly/Lx Lx/Ly
1.3 0.77
Total BM (kNm) 28.63 39.14
Bottom
Moment Co-efficent 0.57 0.57
Distributed Moment (kNm) 16.32 22.31
Moment factor for CS 0.660 0.819
CS Moment (kNm) 10.77 18.28
MS Moment (kNm) 5.55 4.03
Moment on Beam (kNm) 9.15 15.54
Design Moment M1, M3 (kNm) 5.55 4.03
Top
Moment Co-efficent 0.7 0.7
Distributed Moment (kNm) 20.04 27.4
Moment factor for CS 0.660 0.819
CS Moment (kNm) 13.22 22.45
MS Moment (kNm) 6.82 4.95
Moment on Beam (kNm) 11.24 19.08
Design Moment M2, M4 (kNm) 6.82 4.95

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 5.550 kNm
M1 (per m) = M1/Effective
Width
= 5.970 kNm/m
Area Of Reinforcement = 221.320 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 6.820 kNm
M2/Effective
M2 (per m) =
Width
= 7.330 kNm/m
Area Of Reinforcement = 274.160 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 4.030 kNm
M3/Effective
M3 (per m) =
Width

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 28 of 29

= 5.640 kNm/m
Area Of Reinforcement = 243.460 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 4.950 kNm
M4/Effective
M4 (per m) =
Width
= 6.920 kNm/m
Area Of Reinforcement = 302.360 sqmm/m
Required (BM)
Reinforcement Provided = #10 @ 200 C/C
= 393.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = #10 @ 300 C/C
= 262.000 sqmm/m

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024
 Page 29 of 29

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 11.810 kN
Nominal Shear, ΦVc = 43.490 kN
> 11.810 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x = 14.540 kN
(1 - (Lx / (2 x Ly))))
Nominal Shear, ΦVc = 37.690 kN
> 14.540 Slab Is Safe In Shear

file:///C:/Users/brianbyrnemilay/AppData/Local/Temp/tmp8085.tmp 09/05/2024