Scribd
Upload
73 views1 page

Test Certificate-GeoCore5

The certificate of conformance certifies that a batch of 10,000 GeoCore5 products meet specifications. Test results show the products dimensions are within allowed tolerances for parameters like length, width, thickness and appearance is free of defects.

Uploaded by

bineetmishra1990
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
73 views1 page

Test Certificate-GeoCore5

The certificate of conformance certifies that a batch of 10,000 GeoCore5 products meet specifications. Test results show the products dimensions are within allowed tolerances for parameters like length, width, thickness and appearance is free of defects.

Uploaded by

bineetmishra1990
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CERTIFICATE OF CONFORMANCE (CoC)

Product Name: GeoCore5


CoC No.: REIPL/CoC/GC5/22-23/67 Date: 23-09-2022
S-22946 Shivalaya Const_Thalikulam
Customer Name: M/s Shivalaya Construction Project/WO No.:
to Kodungallur Road Project
Invoice/challan No.: MTKE000000823 Date: 23-09-2022
Batch No: OM/INV-01847/059/HP/09/22 Quantity: 10,000 Nos.

This is to certify that GeoCore5 supplied with above details meet the requirements as stated in purchase
order/project quality assurance plan.
The average test results on random samples are stated below-

S.N. Parameters Standard Method/Instrument Measured Dimensions (mm)


Dimensions (mm) 1 2 3 4 5 Remarks
1 Dimension (A) 198.00±2.0 Vernier Caliper 197.92 198.28 198.11 197.73 198.38 Accepted
2 Dimension (B) 141.50±2.0 Vernier Caliper 141.80 141.38 141.50 141.63 141.41 Accepted
3 Dimension (C) 169.20±3.0 Vernier Caliper 168.80 168.23 168.75 169.23 169.36 Accepted
4 Dimension (D) 108.00±1.0 Vernier Caliper 107.92 108.21 108.05 107.88 108.22 Accepted
5 Dimension (E) 91.00±1.0 Vernier Caliper 90.90 91.08 91.20 90.89 91.02 Accepted
6 Thickness 1.50±0.5 Vernier Caliper 1.52 1.53 1.50 1.51 1.49 Accepted
7 Appearance Free from surface Visual Yes Yes Yes Yes Yes Accepted
defects

Note: This CoC is based on dimensions check and test performed at supplier premises while pre-dispatch inspection
under controlled conditions. Properties may change due to the storage conditions and variation in temperature.

Prepared and approved by

For Reinforced Earth India Pvt. Ltd.


E-11, Block B1 Extension, Mohan Co-operative Industrial Estate,
Mathura Road, New Delhi-110044, India
Terre Armée W: www.terrearmeeindia.com

IMS DOC NO: REIPL/QAC/FMT/11


REV: 2.0
WEF: 01/04/2021, Page 1 of 1

You might also like