Daewoo-Partsnic (Radial Thru-Hole) RND Series

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

RND SERIES ALUMINUM ELECTROLYTIC CAPACITORS

Bi-Polar Standard, Radial Leads

■ Features
• Bi-polar (Radial)
• Ideal for inconsistent polarity circuits
• For the compaction of equipment
• load life of 1000 hours at 85˚C

■ Specifications
Item Performance Characteristics
Operating temperature range -40˚C ~ +85˚C
Rated working voltage range 10V ~ 50V
Nominal capacitance range 0.47µF ~ 1000µF, ±20%(at 20˚C, 120Hz)
D.C Leakage current(at 20˚C) The following specifications shall be satisfied when the rated voltage is applied for the required
time.
I ≤ 0.03CV + 3µA(3 min)
Where I=Leakage current(µA) C=Nominal capacitance(µF) V=Rated voltage(V)
Tan (max., at 20˚C, 120Hz) W.V(V) 10 16 25 50
Tan 0.25 0.20 0.17 0.15
Characteristics W.V(V) 10 16 25 50
at low temperature(max.) Z-25˚C/Z20˚C 3 2 2 2
(impedance ratio at 120Hz) Z-40˚C/Z20˚C 8 6 4 3
Load life After applying rated working voltage for 1000 hours at +85˚C with the polarity inverted every
250 hours and then being stabilized at +20˚C, capacitors shall meet following limits.
Capacitance change Within ± 20% of initial measured value
Tan ≤ 150% of initial specified value
Leakage current ≤ Initial specified value
Shelf life After storage for 500 hours at +85˚C with no voltage applied and then being stabilized at +20˚C,
capacitors shall meet following limits.
Capacitance change Within ± 20% of initial measured value
Tan ≤ 150% of initial specified value
Leakage current ≤ 200% of initial specified value

■ Case sizes and Dimensions ■ Dimensions & Maximum permissible ripple current [mA(rms) at 85˚C, 120Hz]
øD x L(mm)
W.V 10(1A) 16(1C) 25(1E) 50(1H)
15.0
Cap(µF) SIZE IR SIZE IR SIZE IR SIZE IR
0.47 5 x 11 10
ød
1.0 5 x 11 16
2.2 5 x 11 26
4.0
3.3 5 x 11 33
4.7 5 x 11 27 6.3 x 11 42
10 5 x 11 50 8 x 11.5 70
• Standard lead style 22 5 x 11 62 6.3 x 11 75 6.3 x 11 90 10 x 12.5 120
33 6.3 x 11 82 6.3 x 11 100 8 x 11.5 115 10 x 16 160
øD 5.0 6.3 8.0 10.0 13.0 16.0
47 6.3 x 11 105 8 x 11.5 125 10 x 12.5 150 10 x 20 200
p 2.0 2.5 3.5 5.0 7.5
100 8 x 11.5 165 10 x 12.5 200 10 x 16 260 13 x 20 340
ød 0.5 0.6 0.8
220 10 x 16 270 10 x 20 340 13 x 20 420
D’= [D+0.5]Max. L’= [L+1.0]Max. at D ≤ 8.0
330 10 x 20 340 13 x 20 430
L’ = [L+1.5]Max. at D ≥ 10.0
470 13 x 20 440 13 x 25 550
1000 16 x 25 700 16 x 25 900

62

You might also like