List of Tool Room Machineries with specification

1. Centre Lathe with Standard Accessories

Sl. No. Items Unit Specification
1 Height of the Center mm 220-250
2 Centre distance mm 1000
3 Maximum Swing over bed mm 440-500
4.1 Swing over cross slide mm 250-300
4.2 Swing over carriage wings mm 420-480
4.3 Swing in Gap mm 650-750
4.4 Width of Bed mm 410-450
5 Carriage
5.1 Cross slide travel mm 280-310
5.2 Dial Graduation of Cross slide mm 0.05
5.3 Top slide travel mm 130-170
5.4 Dial Graduation of Top slide mm 0.05
5.5 Angular Swivel graduation degree ±45
5.6 Tool Shank Size mm x 25x25
mm
6 Tailstock
6.1 Sleeve travel mm 180-220
6.2 Spindle Sleeve diameter/taper. mm 90/MT 5
7 Spindle
7.1 Spindle nose/bore mm A2-6/53
7.2 Spindle socket taper Metric 60/53mm bore
7.3 Spindle speed RPM 16 from 40-2040 or better
Forward 8 from 60-2375 or
better Reverse
7.4 Power Main Motor KW 11
8 Feeds & Threads
8.1 Longitudinal feeds mm 60 from 0.04-2.24
8.2 Cross feeds mm 60 from 0.02-1.12
8.3 Metric threads mm 320/0.15-12
8.4 US & Whitworth threads TPI 39/80-2
8.5 Module threads mm 37/0.1 to 3.5
8.6 Lead Screw Pitch mm 6-8
9 Accessories
9.1 Ø160 mm x 3jaw self center chuck
9.2 Four Jaw chuck (ø 160 mm) with Adapter
9.3 MT5 – MT3 centre sleeve
9.4 MT3 – male center
Set of accessories suitable to the
9.5 Quick change tool post
machine
9.6 Electric coolant system with splash guard
9.7 4 way Tool post
9.8 5c Quick acting collet attachment
9.9 Hand wheel type collet attachment
9.10 Set of collets -size 5 mm to 20 mm -step of 1
mm
9.11 Collet Holders
9.12 Dog carriers dia. 20 mm , dia. 30 mm
9.13 Splash Guards
9.14 Revolving Center
9.15 Drill Chuck
9.16 Reduction sleeve- MT3-MT2, MT2-MT1
9.17 Fixed & Traveling steady rest
Extra change gears –for inches, module & DP
9.18 threads
9.19 Face plate(200mm)
9.2 Driver plate
9.21 Service tools
9.22 Machine Lamp
9.23 Live & Dead Center
9.24 Foot Brake
9.25 Chuck guard
9.26 One set of manuals
Bidder to specify and quote if any
other accessories available
10 Others
/required for smooth running of the
machine
11 General features :
The specification of feed drive motors with make,
11.1
model no., max. & nominal torque
Preferably the guideways of all axes should have
telescopic type protective covers with adequate
11.2 sealing on joints to prevent seepage of dust &
coolant oil inside. Guide ways should be of
hardened steel with hardness HRC60 or more Bidder to specify the features of the
The machine must have rigid streamlined and machine
vibration free construction. All gears must be case
hardened and ground and all the slides should be
11.3
rigid to withstand heavy stock removal. It should
have independent main drive and feed drive
motors.
Each axis should have electrical limit switches
11.4 interlocked with feed/ rapid drive as well as
mechanical stopper
 2. Pedestal Grinder
S.No Items Units Specification
1 Wheel Size (Outer dia. x width x mm (250-300) x (25-40) x (25.4 -
bore dia.) 31.75)
2 Wheel Center Distance mm 600 – 650
3 Distance between base and mm 800-950
wheel spindle
4 Motor Power HP 1 or better
5 Speed of motor rpm 1400 or better
6 Accessories
6.1 One set of wheels
6.2 Wheel guard
6.3 Tool Rest Set of accessories suitable to the machine
6.4 One set of Service Tools ,
spanners
Bidder to specify and quote if any other accessories
7 Others
available /required for smooth running of the machine
8 General features :
The specification of feed drive
8.1 motors with make, model no.,
max. & nominal torque

Preferably the guideways of all

axes should have telescopic type
protective covers with adequate
8.2 sealing on joints to prevent
seepage of dust & coolant oil
inside. Guide ways should be of
hardened steel with hardness
HRC60 or more
Bidder to specify the features of the machine
The machine must have rigid
streamlined and vibration free
construction. All gears must be
8.3 case hardened and ground and
all the slides should be rigid to
withstand heavy stock removal. It
should have independent main
drive and feed drive motors.
Each axis should have electrical
8.4 limit switches interlocked with
feed/ rapid drive as well as
mechanical stopper
 3. Pillar Type Drilling Machine
Sl.No Items Units Specification
1 Drilling Capacity
1.1 In Mild Steel mm 25-32
1.2 In cast iron mm 25-32
2 Pillar Diameter mm 100-125
3 Spindle nose to table distance mm 550-650
4 Spindle nose to base distance mm 1000-1100
5 Distance from Spindle centre to mm
Pillar face 240-260
6 Morse Taper in Spindle MT.3 MT.3
7 Number of Speeds 8
8 Range of Speed RPM 100-2000
9 Table Size mm 300-350
10 Base working surface mm 300 x 300
11 Spindle Travel mm 125-175
12 Motor 1 HP 1 HP
12 Standard Accessories
12.1 Drill Chuck with key and arbor
12.2 Machine Lamp
12.3 Machine Vice
Set of accessories suitable to the machine
12.4 Reduction Sleeves
12.5 D.O. L Starter with No Volt Coil
12.6 Set of Manuals / CD
13 Others Bidder to specify and quote if any other accessories
available /required for smooth running of the machine
14 General features :
The specification of feed drive
14.1 motors with make, model no.,
max. & nominal torque
Preferably the guideways of all
axes should have telescopic type
protective covers with adequate
sealing on joints to prevent
14.2
seepage of dust & coolant oil
inside. Guide ways should be of
hardened steel with hardness
HRC60 or more Bidder to specify the features of the machine
The machine must have rigid
streamlined and vibration free
construction. All gears must be
case hardened and ground and
14.3
all the slides should be rigid to
withstand heavy stock removal. It
should have independent main
drive and feed drive motors.
Each axis should have electrical
limit switches interlocked with
14.4
feed/ rapid drive as well as
mechanical stopper
 4. Bench Type Drilling Machine
Sl.No Items Units Specification
1 Drilling Capacity
1.1 In Mild Steel mm 13
2 Spindle Travel mm 80
3 Spindle Taper ---- Solid
4 No. of Spindle Speed mm 4
5 Range of Spindle Speed mm 500- 2825
6 Column Diameter mm 46.8
Max. Distance Between Spindle
7 mm
Centre to Column face 152
Max. Distance between spindle
8 mm
Nose to Working Table 280
Max. Distance between Spindle
9 mm
Nose to base plate 495
10 Size of Square Table mm 210 x 215
11 Size of base plate mm 235 x 360
12 Electric Motor ---- 3 Phase , 0.5 HP,1440 RPM
13 V Belt Size M-2360
14 Weight of the Machine Kgs 48
15 Standard Accessories
15.1 Drill Chuck with key and arbor
15.2 Machine Lamp
15.3 Drill Drift
15.4 V-Belt
15.5 Machine Vice Set of accessories suitable to the machine
15.6 Reduction Sleeves
15.7 D.O. L Starter with No Volt Coil
15.8 Set of Manuals / CD
16 Others Bidder to specify and quote if any other accessories
available /required for smooth running of the machine
17 General features :
The specification of feed drive
17.1 motors with make, model no.,
max. & nominal torque
Preferably the guideways of all
axes should have telescopic type
protective covers with adequate
sealing on joints to prevent
17.2
seepage of dust & coolant oil
inside. Guide ways should be of Bidder to specify the features of the machine
hardened steel with hardness
HRC60 or more
The machine must have rigid
streamlined and vibration free
construction. All gears must be
case hardened and ground and
17.3
all the slides should be rigid to
withstand heavy stock removal. It
should have independent main
drive and feed drive motors.
 5.Heavy Duty Lathe Machine with Standard Accessories
Sl. No. Items Unit Specification
1 Height of the Center mm 260-280
2 Centre distance mm 1500
3 Maximum Swing over bed mm 575-600
4.1 Swing over cross slide mm 350-360
4.2 Swing over carriage wings mm 545-560
4.3 Swing in Gap mm 800
4.4 Width of Bed mm 415
5 Carriage
5.1 Cross slide travel mm 300
5.2 Dial Graduation of Cross slide mm 0.05
5.3 Top slide travel mm 150
5.4 Dial Graduation of Top slide mm 0.05
5.5 Angular Swivel graduation degree 45 (+ & -)
5.6 Tool Shank Size mmxmm 25x25
6 Tailstock
6.1 Sleeve travel mm 200
6.2 Spindle Sleeve diameter/taper. mm 90/MT 5
7 Spindle
7.1 Spindle nose/bore mm A2-6/53
7.2 Spindle socket taper Metric 60/53mm bore
7.3 Spindle speed RPM 16 from 40-2040 or better
Forward 8 from 60-2375
or better Reverse
Power Main Motor KW 11
8 Feeds & Threads
8.1 Longitudinal feeds mm 60 from 0.04-2.24
8.2 Cross feeds mm 60 from 0.02-1.12
8.3 Metric threads mm 320/0.15-12
8.4 US & Whitworth threads TPI 39/80-2
8.5 Module threads mm 37/0.1 to 3.5
8.6 Lead Screw Pitch mm 6
9 Accessories
9.1 Ø160 mm x 3jaw self center chuck
9.2 Four Jaw chuck (ø 160 mm) with Adapter
9.3 MT5 – MT3 centre sleeve
9.4 MT3 – male center
9.5 Quick change tool post
Set of accessories suitable to the
9.6 Electric coolant system with splash guard
machine
9.7 4 way Tool post
9.8 5c Quick acting collet attachment
9.9 Hand wheel type collet attachment
9.10 Set of collets -size 5 mm to 20 mm -step of 1
mm
9.11 Collet Holders
9.12 Dog carriers dia. 20 mm , dia. 30 mm
9.13 Splash Guards
9.14 Revolving Center
9.15 Drill Chuck
9.16 Reduction sleeve- MT3-MT2, MT2-MT1
9.17 Fixed & Traveling steady rest
Extra change gears –for inches, module & DP
9.18 threads
9.19 Face plate(200mm)
9.2 Driver plate
9.21 Service tools
9.22 Machine Lamp
9.23 Live & Dead Center
9.24 Foot Brake
9.25 Chuck guard
9.26 One set of manuals
Bidder to specify and quote if any
10 Others other accessories available /required
for smooth running of the machine
11 General features :
The specification of feed drive motors with make,
11.1
model no., max. & nominal torque
Preferably the guideways of all axes should have
telescopic type protective covers with adequate
11.2 sealing on joints to prevent seepage of dust &
coolant oil inside. Guide ways should be of
hardened steel with hardness HRC60 or more Bidder to specify the features of the
The machine must have rigid streamlined and machine
vibration free construction. All gears must be case
11.3 hardened and ground and all the slides should be
rigid to withstand heavy stock removal. It should
have independent main drive and feed drive motors.
Each axis should have electrical limit switches
11.4 interlocked with feed/ rapid drive as well as
mechanical stopper
 6. Tool & Cutter Grinder with standard Accessories
S.No Items Units Specification
1 Centre height mm 130
2 Swing mm 280
3 Swing with raising block mm 370
4 Admit between tailstock centres mm 760
5 Admit between work head & tailstock centre mm 615
6 Table
6.1 Longitudinal travel mm 510
6.2 Clamping area mm 980 X 140
6.3 Cross traverse mm 250
6.4 Swivel with centre locking deg. Plus/Minus 45
6.5 Fine Swivel withend locking deg. Plus/Minus 9
7 Tilting Wheel Head
7.1
Ecentricity with central line of column mm 40
7.2 Vertical adjustment mm 250-300
7.3 Spindle Axis
7.4 Above the axis of centres mm 200-230
7.5 Below the axis of centres mm 60-80
8 Swivel
8.1 vertical plane deg. Plus/Minus 20
8.2 Horizontal plane deg. 350
8.3
Wheel speed in either sence of rotation rpm 2800/5800 or better
8.4 Motor Power kW 0.75 or better
9 Work Head
9.1 Spindle bore taper MT5
9.2 Speed range rpm 10,01,60,250
9.3 Power kW 0.18 or better
10 Tail stock taper MT2
11 Internal Grinding
11.1 Dia. Range Min./Max mm 14/56
11.2 Max. Spindle speed rpm 18000 or better
12 Total power kW 3
13 Accessories:
13.1 Cylindrical grinding attachment
13.2 Internal grinding attachment
13.3 Universal vice for surface drinding
13.4 Radius grinding attachment
13.5 Radius trueing attachment
13.6 Hydraulic equipment for table movement
13.7 fine cross feed attachment
13.8 PTFE guide way for cross movement
13.9 Tape relief grinding attachment
Set of accessories suitable to the
13.10 Rough reamer/core drills relief grinding
machine
attachment
13.11 Attachment for grinding and relief of disc cutter
13.12 Spiral milling and hob grinding attachment
13.13 Twist drill sharpening attachment
13.14 Permanent magnetic chuck
13.15 Dust Exhausting device
13.16 Water cooling device
13.17 3-Jaw chuck
13.18 Induxing unit
13.19 Colect chucking attachment
13.20 Attachment for grinding carbide tip tools
13.21 Precision radius grinding attachment.
13.22 DRO for all slides.
13.23 Grinding wheel guards
13.24 Grinding wheel flanges (different sizes)
13.25 Machine Lamp
13.26 Diamond Tool with holder
13.27 One set of manuals
13.28 One set of Service Tools
13.29 Different Grinding wheel (Cup, saucer, taper,
straight etc.)
13.30 Anti vibration pads
Bidder to specify and quote if any
14 Others other accessories available /required
for smooth running of the machine
15 General features :

15.1 The specification of feed drive motors with make,

model no., max. & nominal torque
Preferably the guideways of all axes should have
telescopic type protective covers with adequate
15.2 sealing on joints to prevent seepage of dust &
coolant oil inside. Guide ways should be of
hardened steel with hardness HRC60 or more
Bidder to specify the features of the
The machine must have rigid streamlined and machine
vibration free construction. All gears must be
15.3 case hardened and ground and all the slides
should be rigid to withstand heavy stock removal.
It should have independent main drive and feed
drive motors.

Each axis should have electrical limit switches

15.4 interlocked with feed/ rapid drive as well as
mechanical stopper
 7. PVC Pipe Threading Lathe Machine with Standard Accessories
Sl. Items Unit Specification
No.
1 Height of the Center mm 250-300
2 Maximum Swing over bed mm 600
3 Length of the Bed mm 1800 - 3050
4 Width of the Bed mm 400
5 Spindle Bore Diameter mm 250
6 Size of 4 Jaw Dog Chuck mm 450
7 Motor Power HP 3 -5
9 Accessories
9.1 14 inch DiaFour Jaw chuck with Adapter
9.2 Quick change tool post
9.3 Electric coolant system with splash guard
9.4 4 way Tool post
9.5 5c Quick acting collet attachment
9.6 Hand wheel type collet attachment
9.7
Set of collets -size 5 mm to 20 mm -step of 1 mm
9.8 Collet Holders
9.9 Dog carriers dia. 20 mm , dia. 30 mm
9.10 Splash Guards
9.11 Boring Bar
9.12 ID Threading Bar
9.13 OD Threading Bar
9.14 Fixed & Traveling steady rest
Extra change gears –for inches, module & DP threads
9.15
9.16 Driver plate
9.17 Service tools
9.18 Machine Lamp
9.19 Live & Dead Center
9.20 Foot Brake
9.21 Chuck guard
9.22 One set of manuals
Bidder to specify and
quote if any other
10 Others accessories available
/required for smooth
running of the machine
11 General features :
Bidder to specify the
The specification of feed drive motors with make, model no., features of the machine
11.1
max. & nominal torque
 Preferably the guideways of all axes should have telescopic type
11.2 protective covers with adequate sealing on joints to prevent
seepage of dust & coolant oil inside. Guide ways should be of
hardened steel with hardness HRC60 or more
The machine must have rigid streamlined and vibration free
11.3 construction. All gears must be case hardened and ground and
all the slides should be rigid to withstand heavy stock removal. It
should have independent main drive and feed drive motors.
Each axis should have electrical limit switches interlocked with
11.4
feed/ rapid drive as well as mechanical stopper

8. Horizontal Hydraulic Surface Grinding Machine

S.No Items Units Specification
1 Table Clamping Area mm 1000 x 500
2 Maximum Grinding Width mm 500
3 Maximum Distance between mm 600
Grinding Wheel & Table
4 Self Acting Longitudinal traverse
mm 1050
of the table
5 Cross table traverse , hydraulic mm 570
6 Table traverse speed range per
Mtr. 1.5 to 18 meters
minute
7 Automatic cross feed range per
mm 0.5 to 10
stroke at each reversal
8 Fine feed graduation- Vertical mm 0.001
9 Fine feed graduation-Cross mm 0.001
10 Max. Vertical traverse of wheel
mm 750
head spindle from table
11 Size of Grinding Wheel ( Dia.x
Width x Bore)& Speed of the mm , RPM 300 x 50 x 76 , 2000
Wheel
12 Accessories
12.1 Machine Lamp
12.2 Diamond Tool with holder
12.3 Coolant splash guard
12.4 Wheel balancing stand
12.5 wheel Puller with extracting nut
Set of accessories suitable to the machine
12.6 Wheel guard
12.7 One set of manuals
12.8 One set of Service Tools,
Keys,allen keys, Spanner
12.9 Grinding wheel (Al2O3 ) – 02 Nos.
13 Others Bidder to specify and quote if any other accessories
available /required for smooth running of the machine
14 General features :
Bed is a single piece high tensile
strength casting, heavily ribbed Bidder to specify the features of the machine
14.1 for better vibration damping and
shock absorption ensuring rigidity
to the machine
 Precision scraped V & Flat
14.2 guideways for table with forced
feed continuous lubrication.
Rectangular, box type turcite
14.3 lined guideways for wheel head.

Rapid movement of wheel head

by electric motor for faster
14.4 setting.

Hydraulically operated auto

14.5 infeed at each table reversal
along with inching feed.
Built in motor drive to the grinding
14.6 wheel head.
Hollow spindle for better coolant
14.7 supply to ensure full power
utilisation.

Grinding head tilting facility for

14.8 hollow grinding.

Speed regulation of table with

remote operated proportional
14.9 valve. Table stroke sensed by
limit switches.

Built in safety
interlocks&Hydraulic table
14.10
traverse for infinitely variable
speed and smooth reversal.