Blocklist

Lock-Block Ltd.
THE ORIGINAL
MANUFACTURER
SINCE 1984
13171 MITCHELL ROAD, RICHMOND

WWW.LOCKBLOCK.COM
[email protected]
604-325-9161
1-800-LOK-BLOK
PRODUCT PAMPHLET
February 1-28, 2023
Aggregates Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
www.LockBlock.com | [email protected]
Lock Block Ltd. utilizes an award-winning state-of-the-art crushing, screening, and
washing process to produce hundreds of thousands of tons of high-quality Recycled
Concrete Aggregate (RCA) products annually.
Meet several ASTM, CSA, and MMCD requirements. Test results are available upon
request. Products qualify for LEED® credits.
3” Minus Roadbase
(3" Well-Graded Base)
3/4” Minus Roadbase

(2" Well-Graded Base)
*Prices subject to change without notice and to all applicable taxes. Testing
data available upon request. $25 minimum charge before tax.
Effective February 1-28, 2023 Page 1 / 41

1-800-565-2565 | 604-325-9161
1" Clear Crushed & Washed Concrete
1/2" Clear Crushed & Washed Concrete
Sand - Clear Crushed & Washed

1-800-565-2565 | 604-325-9161
8"-3" Crushed Concrete
3"-1" Clear Crushed Concrete
1" Minus Navvy Jack

Concrete recycling Lock-Block Ltd. 1-800-565-2565 | 604-325-9161
Clear Concrete: Broken up, workable pieces, no

contamina�on
Concrete: 'Light' contamina�on with steel (no dirt or fines)
Concrete: 'Medium' contamina�on with steel mesh or
rebar (no dirt or fines)
Concrete: 'Heavy' contamina�on with steel mesh,
rebar (minimal dirt or fines)
Large rock (2-5 �)
Pump washouts
Off-Load (in flat deck)
Recycling Blocks (Any shape)
Recycling Mini-Blocks (Any shape)
Recycling Highway Barriers (Any shape)
Notes:
1. There is a $25 minimum charge per load.
2. All transac�ons are subjected to the applicable taxes.
3. Load quality is subject to the scale operator's discre�on. Depending on the composi-
�on, Lock-Block Ltd. reserves the right to charge accordingly.
4. Prices are subject to change
The following materials will NOT be accepted:
Lock-Block Ltd. Reserves the right to reloading or apply surcharges on loads with these materials
Asphalt Radiant floor hea�ng tubes Ceramic or porcelain �les
Drywall or gypsum board Wood Plas�c
Styrofoam Flammable materials Garbage
Loads contaminated with
Asbestos Red brick
heavy dirt

MOTI Barriers Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
690 mm CRB Roadside 690 mm CRB Slo�ed 690 mm CDB Drainage
3000 lbs I 1350 kg 2800 lbs I 1250 kg 2100 lbs I 1000 kg
690mm 690mm
27"
27"
0 mm
250mm 100 "
m 0m
m 10" 39
0m 100 9"
250 8" 3 0m
m
562
m 9 0m
m 562 250 8"
m
22" m 562
mm
250 8"
9 22" m
9
22"
810 mm CMB Median 810 mm CMB Slo�ed 810 mm CMDB Drainage

810mm
810mm 810mm 32"
32" 32"
m
0m
100 9"
m 0m
m 3
0m 100 9"
250mm m
612 250 8" 3 10" 0m
250 ' 2"
m 9 612 m
24" m m 0m 8
24" m 250 8" 612
m
9 24" m
460 mm to 690 mm 460 CBN Bullnose 690 to 810 Transi�on CTB-2H

Transi�on CTB-1E 700 lbs I 300 kg 1800 lbs I 800 kg
2400 lb I 1100 kg
810mm
690mm
32"
460mm
27" 18"
690mm
562 27"
m 61
22" m 2m
460mm 24 m
m 0 mm m "
18" 0m
250 8" 460 120 " 0m
9 mm 47 562 130 1"
460 18" m 5
m 22" m
18" m
Available with lifting hole
810 Bridge Parapet Transi�on

2600 lbs I 1200 kg
810mm
32"
6 1 2 mm
24"
m
m
00
20 79"
4 0 2 mm
16"
All barriers are available in eye or hook variants unless specified.

All barriers can be made with steel mesh reinforcement instead of fibre on request.
All produced MoTI Barriers meet or exceed the requirements of BC-MOTI-SS, and DBSS sec�on 941.
Weights may vary by 5%.
Page 5 / 41
MOTI Barriers cont. Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
460 mm CLB 18” 810 CPB Pier Barrier 686mm to 690mm Transi�on, CTB3-E/H
460mm
18" 690mm
810mm 27"
32"
m m
0m 0m
305 0"
46 12 562 250 8"
0m m m 9
0m
18 m
" 250 8" 22" m
414 9
m
16" m
690 mm Bullni�on 1070 CMT Parapet Transi�on

2000 lbs I 900 kg 3840 lbs I 1750 kg
690mm 1070mm
27" 42"
42
562 5
m 810mm 1 6 mm
22" m 32" .7"
0m
m mm
250 8" 00
9 25 98"
46 61
0m 2m
18 m 24 m
" "
Painted barrier Order colour at �me

Barrier Add-Ons of purchase
CRB modifica�on for �ght curvature
Grouted barrier
*The minimum Radius of Curvature for
If available: CRBS with Tight Curvature Modifica�on
is 17m (55’9”)
Used: 50% off regular price.
U�lity: 30% off regular price.
Barriers are made as either:
• Female-Female (E)
• Male-Male (H)
• Male-Female (E/H)
All produced MOT barriers meet or exceed the requirements of BC-MOTI-SS and DBSS sec�ons 211 and 941
Barrier services Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
We provide the following services for concrete barriers:
- Installa�on
- Reloca�on
- Removal
- Disposal
Call or email for quote.
810mm CMB barriers on South Fraser Perimeter road, Surrey

Lock-Block™ barriers Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
*The minimum Radius of Curvature for Lock-Block™
One-Cross Barriers with Tight Curvature Modifica-
�on is 6m (19'8").
690 mm Lock-Block™ Barrier Half
900 lbs I 400 kg
690mm Lock-Block™ T junc�on
7 5 0 mm
1000 lbs I 450 kg 29.5"
690mm Lock-Block™ L junc�on 562 690mm
m 27"
22" m
800 lbs I 350 kg 690mm
27"
690mm
65
27" 6m mm
25 m 656 .8"
.8" 25
56 Shipping dimensions LxWxH
2m mm 656x750x690 mm
22 m
.1" 562 .1" 28.8x29.5x27 "
22
Shipping dimensions LxWxH
656x656x690 mm
28.8x28.8x27 "
690 mm Lock-Block™ Barrier

1700 lbs I 750 kg
1 5 0 0 mm
59"
690mm
562 27"
m
22" m
Lock-Block™ barriers work with our proprietary

blocks to provide stability and reinforcement to
the barriers. Rod-Lock™ conduits can be added
to any barrier (One-cross, Two-cross, T junc�on,
or L junc�on).
*All Lock-Block™barriers available in Rod-Lock™variants.

Wall systems Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
GRAVITY WALL
• Classic Lock-Block™ wall system used for over 3 decades for
various construc�on applica�on.
• Design Manual available for Professional Engineers free of
charge.
• Example uses: retaining wall, storage bin, etc.
MSE WALL
• Mechanically Stabilized Earth (MSE) walls constructed with
Standard Lock-Block™ units in combina�on with extensible soil
reinforcement (such as Geogrid™)
• Design Manual available for professional Engineers free of
charge.
• Example uses: Advanced retaining walls
ROD-LOCK™ WALL
• A composite semi-gravity retaining wall system made of Lock-
Block™ concrete blocks and hot-dip galvanized steel rods with
locking anchors.
• Design Manual available for professional Engineers free of
charge.
• Example uses: Push wall, retaining wall, storage bins, etc.
• Rod-Lock™ unts are available in Three-Cross blocks for
staggering purposes.
LANDSCAPING WALL
• Walls made of ½ scale blocks
• Each block weighs 1/8 of its full-size counterpart
• Can be used in all wall types above (Gravity, MSE, and Rod-
Lock™ walls)
• Default facing: Texturlock™
• Default strength: Min 20MPa with Min 4% air content

How to order Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
Choose Blocks (Pages 11 - 21)

Keyed Blocks, Flat-Top Blocks, Benches, Slopes,
Stairs, Anchor Blocks, and Specialty Blocks.
LIFTING LOOP DESIGN
The li�ing loop was designed and stamped by a licensed Professional
Engineer registered in the province of Bri�sh Columbia. Li�ing loops are
designed for mul�ple li�s within two years from the date of manufacture.
Before li�ing, the loop must be inspected to ensure that all cable strands
are free from physical or chemical defects. The li�ing loop is considered
unsafe if one or more strand is broken or significantly pi�ed by corrosion.
A copy of the tes�ng cer�ficate is on file with Lock-Block Ltd. and is avail-
able for inspec�on. Lock-Block™ units should not be li�ed overhead of
crew or equipment.
Full Keyed Standard
Choose a concrete mix design (Page 22)

U�lity class A, U�lity class B, Tagged 20, Tagged 30, Tagged 32,
and MOTI spec.
Location of Spec Tag
Choose facing (Page 23)

Standard smooth, smooth grade A, Texturlock™, Ver�cal rib,
Cutstone, Granite, or custom.
Facing request are available for most blocks.
Texturlock™Facing
Choose customizations and add-ons

(Pages 24 and 39)
Weights, paint, anchors, pipes, Rod-Lock™, conduits, inserts,
and more.
Rod-Lock™Insert

Keyed blocks Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
Prices are reflec�ve of Tagged20 Blocks, with guaranteed 20MPa compressive strength, min. 4% air content, and standard smooth facing.
Block weights can vary by 5%.
One-Cross Two-Cross Three-Cross
P/N: 1 P/N: 2 P/N: 3
750mm
750mm 29.5"
750mm 29.5"
29.5"
mm
75 mm 50
0 00 22 8.5"
2 9 mm m 75 15 59" 75 8
0m 0 0
2 9 mm
.5" 75 .5" 2 9 mm
29 .5" .5
"
20mm chamfer version available 20mm chamfer version available
U�lity #1 U�lity #1 Tagged 20 MPa
Tagged 20 MPa Tagged 20 MPa
One-Cross Half Two-Cross Half Three-Cross Half

P/N: 1H P/N: 2H P/N: 3H
375mm
375mm 14.8"
375mm 14.8"
14.8"
m
m 0m
75 0m 225 .5"
0m mm 75
0m 150 9" 75
0m 88
29 m
.5" 750 .5" 29 m
5
29 m
29 .5" .5"
Tagged 20 MPa Tagged 20 MPa Tagged 20 MPa
Four-Cross Five-Cross Double-Wide

P/N: 4 P/N: 5 P/N: D2
750mm 750mm
29.5"
29.5"
750mm
29.5"
mm
50 "
mm 37 47.5
00 1
30 18" 75
1 15
75
29 0m 00 mm
0 5 9 mm 00
2 9 mm .5 m " 15 59"
.5 "
"
Design manual available for professional Engineers free of charge. E-mail for info
Blocks are normally available for immediate delivery, however, some configura�ons may not be in stock,
and will require advance no�ce. Granite or textured facing can be added to most blocks upon request.
Flats and transitions Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
Prices are reflec�ve of Tagged20 Blocks, with guaranteed 20MPa compressive strength, min. 4% air content, and Standard Smooth
facing. Block weights can vary by 5%.
One-Cross Flat Two-Cross Flat Three-Cross Flat
P/N: 2F P/N: 3F
P/N: 1F
750mm
750mm
29.5"
29.5"
750mm
29.5"
mm mm
00 50
75
0 15 59" 75 22 8.5"
m 75 8
2 9 mm 0m " 0 0
.5" 75 2 9 mm 2 9 mm
.5 .5" .5"
29
20mm chamfer version available 20mm chamfer version available
U�lity #1 U�lity #1 Tagged 20 MPa
One-Cross Half Flat Two-Cross Half Flat Three-Cross Half Flat

P/N: 1HF P/N: 2HF P/N: 3HF
375mm
375mm 14.8"
375mm 14.8"
14.8"
m
m 0m
75 0m 225 .5"
0m mm 75 150 9" 75 88
29 m 750 .5" 0m 5 0m
.5" 29 29 m 29 m
.5" .5"
Four-Cross Flat Five-Cross Flat Double-Wide Flat

P/N: 4F P/N: 5F P/N: DF2
750mm
29.5" 750mm
750mm 29.5"
29.5"
mm
50 "
37 47.5
1 15
00 mm
75 00
mm 0
2 9 mm 5 9 mm 15 59"
00 "
30 18" .5"
75 1
0
2 9 mm
.5"
Benches Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
One-Cross Bench Two-Cross Bench Le� Corner Bench
300
m P/N: 1B 300
P/N: 2B P/N: LCB
12" m mm
12"
750mm 750mm
45 29.5" 29.5"
0m
750mm 18 m
29.5" "
45
0m
18 m
"
mm
75 mm 00
0
2 9 mm 0m
m 75 00 75 15 59"
75 .5" 0 15 59" 0
.5" 2 9 mm 2 9 mm
29 .5" .5"
Right Corner Bench Le� Slope Bench Right Slope Bench

P/N: RCB P/N: LSB P/N: RSB
300
m
12" m
750mm 750mm 750mm
29.5" 29.5" 29.5"
45
0m
18 m
"
mm
mm 00 15
00 75 15 " 00
75 15 59" 0 59 m
0
2 9 mm 2 9 mm 59 m
" m
.5" .5" 0m
75 9.5"
2
Le� Inside Corner Bench Right Inside Corner Bench

2550 lbs I 1150 kg 2550 lbs I 1150 kg
P/N: LICB P/N: RICB
300mm 300
m
12" 12" m
750mm
29.5"
450mm
18" 750mm
29.5" 45
0m
18 m
"
mm
15 00
00 m
75
0 15 59"
5 9 mm 0m " 2 9 mm
" 75 9.5 .5"
2

Sloped Lock-Block Ltd. 1-800-565-2565 | 604-325-9161
Prices are reflec�ve of Tagged20 Blocks, with guaranteed 20MPa compressive strength, min. 4% air content, and Standard Smooth facing.
Half Slope - Le� Half Slope - Right
1200 lbs I 550 kg 1200 lbs I 550 kg
P/N: 1SL P/N: 1SR
750mm
29.5" 750mm
29.5"
75 m 75 m
0m 0m 0 0m "
29 m 75 9.5" 2 9 mm 75
.5" .5
.5" 2 29
Slope - Le� Slope - Right

3000 lbs I 1350 kg 3000 lbs I 1350 kg
P/N: 2SL P/N: 2SR
750mm 750mm
29.5" 29.5"
mm 15
00
75 00 m
15 " 59 m m
0 59 0m "
2 9 mm "
75 9.5
.5"
2
Slope Flat - Le� Slope Flat - Right

2950 lbs I 1350 kg 2950 lbs I 1350 kg
P/N: 2SFL P/N: 2SFR
750mm 750mm
29.5" 29.5"
15
mm 00
m
75 00 59 m m
15 " 0m
0 59 "
2 9 mm 75 9.5"
.5" 2
Sloped cont. Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
Mild Slope - Le� (2:1) Mild Slope Right - (2:1)
2300 lbs I 1050 kg 2300 lbs I 1050 kg
P/N: MSL P/N: MSR
750mm 750mm
29.5" 29.5"
15
mm 00
00 m
75 15 " 59 m m
0 59 " 0m
2 9 mm 75 9.5"
.5 2
"
Side Slope - Le� Side Slope - Right

2450 lbs I 1100 kg 2450 lbs I 1100 kg
P/N: SSL P/N: SSR
750mm 750mm
29.5" 29.5"
15
00
m mm
59 m 75 00
m 0 15 "
"
0m 2 9 mm 59
75 9.5" .5"
2

Stairs Lock-Block Ltd.1-800-565-2565 | 604-325-9161
One-Cross Stairs - Le� One-Cross Stairs - Right
1200 lbs I 550 kg 1200 lbs I 550 kg
P/N: 1STAIRL P/N: 1STAIRR
750mm 750mm
29.5" 29.5"
75 m 75 m
0m 0m 0
2 9 mm 0m "
29 m
.5" 75 9.5" .5"
75 .5
2 29
Each step is 250mm deep and 250mm tall Each step is 250mm deep and 250mm tall
Two-Cross Stairs - Le� Two-Cross Stairs - Right

2400 lbs I 1100 kg 2400 lbs I 1100 kg
P/N: 2STAIRL P/N: 2STAIRR
750mm 750mm
29.5" 29.5"
15
00
m mm
59 m m 75 00
0 15 "
" 0m 2 9 mm 59
75 9.5' .5'
2
Each step is 250mm deep and 250mm tall Each step is 250mm deep and 250mm tall
Speciality Stairs - Le� Speciality Stairs - Right

2250 lbs I 1050 kg 2250 lbs I 1050 kg
P/N: STEPL-4 P/N: STEPR-4
750mm 750mm
29.5" 29.5"
150
75 mm 0m
0 00 59" m m
2 9 mm 15 " 0m "
.5" 59 75 .5
29
Each step is 375mm deep and 187.5mm tall Each step is 375mm deep and 187.5mm tall

Example wall Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
Prices are reflec�ve of Tagged20 Blocks, with guaranteed 20MPa compressive strength, min.
4% air content, and Standard Smooth facing. Block weights can vary by 5%.
Le� slope
bench
Two-cross
bench
Right slope
Le� corner bench
bench
Two-cross
Front and right
Two-cross
Front and le�
Two-cross
Slope - Right
Anchor blocks Lock-Block Ltd. 1-800-565-2565 | 604-325-9161
Option 1 - Horizontal Pipe
1"-4" Horizontal pipe(s) can be added to any block.
Option 2 - Heavy duty lifting eye(s)

Li�ing eye(s) made from 1.5" steel rod can be added
to any block on page 11, 12, or 13.
Option 3 - Standard anchor block

Large Anchor Medium Anchor Small Anchor
Max weight 22,700 lbs I 10,300 kg Max weight 10,000 lbs I 4550 kg Max weight 3550 lbs I 1600 kg
10.1 Imperial tons 4.5 Imperial tons 1.6 Imperial tons
m 860m
1750mm 860m m
1750mm 1220mm
1220m
m 34" 34"
69" 69" 48" 48"
1525mm 1155mm
60" 45.5"
1475mm max height
max height
58"
Max height
18 10
m 30
54 m 4 0 mm mm
7 3 mm 54 12 mm 30
18 73" 20 .5" 10 0.5"
" 20 4
4 8 mm 12 48"
"
Top dimensions will change if built shorter Top dimensions will change if built shorter
Weight of all anchors is variable +/- 5%
Specialty Lock-Block Ltd. 1-800-565-2565 | 604-325-9161
Ba�ered blocks can be used to
Ba�ered Block Ba�ers Available: create walls, without doing
12 degree block shown
1:4.7 - 12° complex grading to set the wall
1:2.7 - 20° at an angle. The block can be
1:6 - 9.5° placed at any level, allowing for
greater control over your
retaining wall solu�on.
Parking Curb 4’ x 3’ Paving Pad 2’ x 2’ Pa�o Pad

P/N: CURB-7 P/N: PAD-4x3 P/N: PAD-2x2
152mm
6"
135mm
46mm
5.25"
213 1.8"
0m
84" m 12
20 610
m m m m mm
8m 48 m
" 5m 24" m 610 "
22 9" 91 36" 24
One-Cross Planter Two-Cross Planter

1550 lbs I 700 kg 2850 lbs I 1300 kg
P/N: 1P P/N: 2P
Sound Wall
10300 lbs I 4700 kg
750mm
750mm 29.5"
29.5"
mm
75 75 00
0 m 0 15 "
2 9 mm 0m " 2 9 mm 59
.5" 75 .5 .5"
29
2290mm
7' 6"
Tuf-Stop™ curb by Tuf-Tite® with

yellow plas�c cover
160 lbs I 70 kg
P/N: CURB-6TS mm
12 0 00 0"
20 3 '1
9
150mm 8 4 mm
6" "
183
0m
72" m
m
0m
15 6"
Specialty cont. Lock-Block Ltd. 1-800-565-2565 | 604-325-9161
Hinge Block - Right Hinge Block - Le�
3150 lbs I 1450 kg 3150 lbs I 1450 kg
P/N: HFR P/N: HFL
750mm 750mm
29.5" 29.5"
75 m
0m 0m "
29 m 75 .5
.5" 29
15
00 mm
m 00
59 m 15 59"
"
750mm before semi-circular curve 750mm before semi-circular curve
With the Hinge block, corners can be built

at any angle, when installed at grade.
Wedge Wedge Flat Wedge Bench

P/N: W P/N: WF P/N: WB
300mm
12"
750mm 750mm 750mm
29.5" 29.5" 2.5'
450mm
22.5° 18"
22.5° 0 mm 22.5° 0m m 15
153 0" 153 0" 3m 0 mm
6 6 m 153 5' 1"
15 15
3m 3m 6"
6" m 6" m
Length is 1500mm along centre-line Length is 1500mm along centre-line Length is 1500mm along centre-line
Texture available on back face Texture available on back face Texture available on back face
Wedge blocks in corner
Wedge blocks can be used to connect two

walls at angles in increments of 22.5
degrees, making them perfect for pre-loads
and irregular site plans.
Specialty p3 Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
Prices are reflec�ve of Tagged20 Blocks, with guaranteed 20MPa compressive strength, min. 4% air content, and Standard Smooth facing.
The minimum radius of curvature is

23m
23m and increases with ba�ered

walls. Shorter and longer blocks
can be used to accommodate
�ghter radii.
Two-cross tapered block
< 3000 lbs I < 1700 kg
2+TR
16mm 16mm Less than
750mm / 29.5"
(5/8") Regular (5/8") as desired
shorter longer
1500mm
59"
Specifications Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
• Made with le�-over concrete
• Might have cosme�c imperfec�on (Less than 5% )
UTILITY #1 •
•
•
Engineered li�ing eye: PC strand cable with breaking load of over 40000lbs
Availability varies �me to �me
Example uses: any construc�on project with no restric�on on concrete proper�es
• Made with le�-over concrete

• Might have some concrete defects and tolerance imperfec�ons or mixed and matched
textures.
UTILITY #2 •
•
•
Availability varies �me to �me
Example uses: some construc�on project with no restric�on on concrete proper�es,
temporary walls and bins, etc.
• Proprietary Lock-Block™ concrete mix freshly made in our precast facility

• Over 25 years of track record and proven performance in BC
TAGGED 20 •
•
•
Each block has an embedded aluminum tag with traceable QC number
Minimum guaranteed strength: 20MPa
• Minimum air content: 4%
• Meets or exceeds the requirements of CSA-A23 classes of exposure A-4, C-4, F-2, N, R-1, R-2,
R-3
• Guaranteed Strength: Minimum of 25MPa
• Guaranteed air content (For durability in freezing condi�ons): Minimum of 4% or as per
TAGGED 25 •
•
customer requirements
Maximum Water-Cement ra�o: 0.55
Each block has an embedded aluminum tag with a traceable QC number
• Engineered li�ing eye: PC strand cable with a breaking load of over 40000lbs
• Proprietary Lock-Block™ concrete mix freshly made in our precast facility for making the
blocks
• Meets or exceeds the requirements of CSA-A23 classes of exposure C-3, A-3, C-4, A-4, F-1,
F-2, R-1, R-2, R-3 N-CF, S-3
• Each block has an embedded aluminum tag with traceable QC number
TAGGED 30 •
•
•
Minimum guaranteed strength: 30MPa
Air content: Minimum 4%, or as per customer requirements
• Maximum water-cement ra�o: 0.45
• Meets or exceeds the requirements of CSA-A23 classes of exposure C-2, C-3, A-2, A-3, C-4,
A-4, F-1, F-2, R-1, R-2, R-3 N-CF, S-3
TAGGED 32 • Engineered li�ing eye: PC strand cable with breaking load of over 40000lbs
• Minimum guaranteed strength: 32MPa
• Air content: 5%-8%, or as per customer requirements
MOT SPEC • Meets or exceeds the requirements of:

1) BC MOTI standard specifica�ons SS211 and DBSS 2211
2) BC MOTI recognized product list, several retaining wall categories
3) CSA-A23 classes of exposure C-3, A-3, C-4, A-4, F-1, F-2, R-1, R-2, R-3 N-CF, S-3
• Engineered li�ing eye: PC strand cable with breaking load of over 40000lbs
• Minimum guaranteed strength: 32MPa
Pick facing • Air content: 5%-7%
(next page) • Minimum cement content: 320 kg/m3
• Slump: 30-70mm
• Note: Special provisions and job specific requirements may differ and must be considered at
the �me of ordering
Facings Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
Texturlock™ $19 Standard Form Finish

Smooth Grade A $19
Ver�cal rib $19 Cutstone $19
and up
+Custom Liner
Granite +Stamping on Block
Modifications Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
REGULAR (DEFAULT) CHAMFERS
Regular blocks Landscaping chamfer
50mm 750mm 25mm

2" 29.5" 1" 375mm
14.8"
m
0m "
37 75 .5
mm 5
1 4 mm
29
00 .8"
75 15 59"
0
2 9 mm
.5"
CUSTOM CHAMFERS
20mm (Y) chamfer Zero Chamfer (Z)
20mm 750mm 750mm

.8" 29.5" 29.5"
mm mm
00 00
75 15 59"
75 15 59"
0
0 2 9 mm
2 9 mm .5"
.5"
BLOCK ADD-ONS
Painted block Geogrid embedment
Order colour at �me of purchase. Can be installed in any block.

Block can be textured or smooth. Geo-grid to be provided by client.

Landscaping Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
Landscaping blocks are half the size of
the standard blocks in each dimension,
making them 1/8th in volume and
weight. They can be placed with a skid
steer, saving �me and hard labour costs.
Full size All Landscaping Blocks come with

Texturlock™ Facing. Planters can also be
made with Texturlock™ on all sides.
Landscaping blocks are guaranteed min. strength of

20Mpa, and 4% air content
Landscape
Landscaping options
Strengths
25MPa
30MPa
32MPa
Rod-Lock™
Pipe Holes 1"
Hardware Kit
(Coil rod, coupling nut, locking plate,
and galvanized washer)
Other op�ons
1"-2" pipe for anchoring
Addi�onal textured faces
Granite
Landscaping keyed Lock-Block Ltd. 1-800-565-2565 | 604-325-9161
Mini One-Cross Mini Two-Cross Mini Three-Cross
P/N: M.1 P/N: M.2 P/N: M.3
375mm
375mm 14.8"
14.8"
375mm
14.8"
m mm
0m " 25
37 75 .5 37 11 4.3"
37 m 5 2 9 5 4
5 1 4 mm 1 4 mm
1 4 mm 5m "
.8" 37 .8 .8" .8
14 "
Mini One-Cross Half Mini Two-Cross Half Mini Three-Cross Half

P/N: M.1H P/N: M.2H P/N: M.3H
188mm
188mm 7.4"
188mm 7.4"
7.4"
m
5m
37 mm 112 .3"
5m mm 37 750 .5" 37 44
14 m
.8" 375 .8" 5m 29 5m
14 m
14 14 m
.8" .8"
Mini Double-Wide Mini Slope - Le� Mini Slope - Right

940 lbs I 420 kg 370 lbs 170 kg 370 lbs 170 kg
P/N: M.D2 P/N: M.2SL P/N: M.2SR
375mm
375mm 14.8"
375mm 14.8"
14.8"
75
0m
75 m m 29 m
0 0m 0m .5" m
2 9 mm 75 9.5" 37 75 .5" 5m
.5" 2
5
1 4 mm 2 9 37 4.8"
.8" 1
Landscaping flat Lock-Block Ltd. 1-800-565-2565 | 604-325-9161
Mini One-Cross Flat Mini Two-Cross Flat Mini Three-Cross Flat
P/N: M.1F P/N: M.2F P/N: M.3F
375mm
14.8"
375mm
375mm
14.8"
14.8"
mm
25
37 m 11 4.3"
m 0m 4
5
1 4 mm 5m " 37
5 75 .5" 37
5
.8" 37 .8 1 4 mm 2 9
1 4 mm
14 .8" .8"
Mini One-Cross Half Flat Mini Two-Cross Half Flat Mini Three-Cross Half Flat
P/N: M.1HF P/N: M.2HF P/N: M.3HF
188mm
188mm 7.4"
188mm 7.4"
7.4"
m
5m
37 mm 112 .3"
5m mm 37 750 .5" 37 44
14 m
.8" 375 .8" 5m 29
5m
14 14 m 14 m
.8" .8"
Mini Double-Wide Flat Mini Slope Flat - Le� Mini Slope Flat - Right
920 lbs I 420 kg 370 lbs 170 kg 370 lbs 170 kg
P/N: M.DF2 P/N: M.2SFL P/N: M.2SFR
375mm
375mm 14.8" 375mm
14.8" 14.8"
75 m 75
0 m 0m " 0m
2 9 mm 0m " 37 75 .5 29 m
75 .5 5 2 9 .5" m
.5" 2 9 1 4 mm 5m
.8" 37 4.8"
1
Landscaping bench Lock-Block Ltd.1-800-565-2565 | 604-325-9161
Mini One-Cross Bench Mini Two-Cross Bench Mini Right Corner Bench
P/N: M.1B P/N: M.2B P/N: M.RCB
150
m 150 150
6" m mm m
6" 6" m
375mm 375mm
375mm 22 14.8" 14.8"
5m
m
14.8" 9"
22 22
5m 5m
9" m 9" m
37 m mm
m 75 0m " 37 00
5 5m 0 75 .5 15 9.5"
1 4 mm 37 .8" 1 4 mm 29
5
1 4 mm 2
.8" 14 .8" .8"
Mini Le� Corner Bench Mini Le� Slope Bench Mini Right Slope Bench
P/N: M.LCB P/N: M.LSB P/N: M.RSB
375mm 375mm
375mm 14.8"
14.8"
14.8"
m m
0m " 0m " 75
37 75 .5 75 0m
9 37 .5 29 m
5
1 4 mm
2 5 29 .5" m
1 4 mm 5m
.8" .8" 37 4.8"
1
Le� Inside Corner Bench Right Inside Corner Bench Mini Two-Cross Planter
320 lbs I 150 kg 320 lbs I 150 kg 350 lbs 160 kg
P/N: M.LICB P/N: M.RICB P/N: M.2P
150mm 150
m
6" 6" m
375mm
14.8" 375mm
14.8"
225mm
9" 375mm
14.8" 22
5m
9" m
m
0m m
75
0 37 75 9.5" 0m "
2 9 mm m 5
1 4 mm 2 37 75 .5
.5" 5m " 5 29
37 4.8 .8" 1 4 mm
1 .8"
Sample walls Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
Full size
These sample walls can be made in both
full scale and landscape scale.
All of the blocks shown are available for both

scales. Landscape
Two-cross Two-cross planter Two-cross flat top
Slope flat - L+R Two-cross bench Le� corner bench Le� slope bench
Slope flat - le�

Two-cross planter
Two-cross flat
Two-cross planter
(Front + le� face)
Slope flat - right
Two-cross
(Front + right face)
Two-cross
Two-cross
(Front + le� face)
Arch-Lock™ Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
The Arch-Lock™ system can be used for many different projects such as river
crossings, overpasses, storage sheds, conveyor protec�on, and more.
With an op�onal headwall, this arch can

be used as an overpass for both trains
and cars.
4.5m
14’9”
6m arch
6m (19’8”’) span 6m
3m arch 19’8”
3m (9’10”) span
Mini arch
1.5m (5’) span 6 metre (19’8”) arch with a�ached headwall
Arch-Lock™ pricing
Mini 3M 6M
One-cross
Two-cross
One-cross keystone
Two-cross keystone
One-cross with curved

conduit
Two-cross with curved

conduit 3m
Three-cross with
curved conduit 3 metre arch with sloped end
Addi�onal blocks can be added for specialty designs such as
sloped blocks. Inquire for pricing
Domes Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
6m Dome-Lock™
K Domes can be used for a variety of structures
such as tornado shelters, bunkers, workshops, or
storage sheds. They can also be combined with
G the Arch-Lock™ system to build larger structures.
F
E Base Block (Two-Cross Silo)- 12
Level A block - 12
D
Level B block - 12
C Level C block - 12
Level D block - 12
B Level E block - 12
Level F block - 12
A
Level G block - 6
Dome key- 1
Complete full dome- 79 blocks

Inside diameter: 6m (19.7ft)
Inside area: 28.2m2 (305ft2)
Outside diameter: 7.5m (24.6ft)
6m Half-dome
Dome connection block
Level B connection block
Level D connection block
Level F connection block
Key connection block
Completed half dome
6m tunnel with half-dome end

Silos Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
Silos made with Lock-Block™ units are ideal for storage, pole protection, and
entrances to shafts and wells. The 6m (19’8”) silo can also be capped with a dome.
1m silo
6m silo
Per level:
Per level:
(3 blocks - 375mm / 14.8” high)

(12 blocks - 750mm /9.5” high)
1.5m silo
Per level:
(4 blocks - 375mm / 14.8” high)
This silo can be capped with a dome

Radiation blocks Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
610mm
610mm 24"
24"
m
m 6 1 0 mm 1220m
6 1 0 mm 1220m 48"
48" 24"
24"
Right corner radia�on block Full radia�on block

2000 lbs I 950 kg 2000 lbs I 950 kg
Radia�on wall assembly
610mm
610mm
24"
24"
1220m 610mm
48"
m
6 1 0 mm 6 1 0 mm
24"
24" 24"
Le� corner radia�on block Half radia�on block

2000 lbs I 950 kg 2000 lbs I 950 kg

Drainage Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
A tapered Arch-Lock™ bridge over a creek 3 Arch-Lock™ structures for a water infiltra�on vault
750mm
Arch-Lock™ structures, headwalls,
29.5"
and gutter blocks can be used in a
mm
7509.5"
2
variety of assemblies to provide
mm
00
75
0
2 9 mm
15 59" options for water management
.5"
including drainage, storage, and diversion.

Gu�er block
3150 lbs I 1450 kg
Headwall comprised of Lock-Block™ units with Standard Lock-Block™ units in headwall

geosynthe�c soil reinforcement.

Standard headwalls Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
920mm
600mm / 23.6” headwall

(outside diameter: 740mm / 29.1”) C
750mm
3 Blocks A
455mm
1500
mm B
432mm
C
(outside diameter: 910mm / 35.8”) 750mm
A
1500m
m 175mm
B
3 Blocks
528mm
D
(outside diameter: 1100mm / 43.3”)
B
C
4 Blocks 750mm
A 625mm
1500
mm
All headwalls come with a 1:10 ba�er op�on. Headwalls

Headwall Blocks are sold in pairs unless specified at the �me of order.
Each example contains keyed full blocks for design purposes.
Headwall blocks are specialty formed to fit around the pipes.
Mini headwalls Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
187mm
E
F
600mm / 23.6” mini headwall C
(outside diameter: 740mm / 29.1”) C
375mm D
A
200mm
6 mini Blocks 750m
m B
111mm
E
F
C
750mm / 29.5” mini headwall
(outside diameter: 910mm / 35.8”) 375mm
D
A
6 mini Blocks 750m
m 100mm B
900mm / 35.4” mini headwall G 318mm

(outside diameter: 1100mm / 43.3”) E
F
C
7 mini Blocks
375mm D
A
750m 75mm
m B
All headwalls come with a 1:10 ba�er op�on. Headwalls

are sold in pairs unless specified at the �me of order.
Each example contains keyed full blocks for design purposes.
Headwall blocks are specialty formed to fit around the pipes.

Model blocks and kits Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
Pre-built and Custom Kits Available for purchase

Use Lock-Block™ model blocks to:
-Help visualize your ideas

-Demonstrate a concept
-Plan installation steps
Each block is exactly 1:25 scale.
Arch-Lock™ structure constructed with model blocks
Headwall constructed with model blocks
Arch-Lock™ block kit A selec�on of model block shapes

Rod-Lock™ system Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
1” Galvanized coil rod

Minimum yield strength
54.3 kips / 241 kN
Galvanized
locking washer
Galvanized
coupling nut
Galvanized
washer
Our Lock-Block™ barriers are specially designed to fit on top of any keyed block,
crea�ng a stable and easy to place design. They can also be used with the
Rod-Lock™ system for added stability.
Pipe holes 1.25" at the center of each key
Rod-Lock™ insert safe
working load (tension)
13.5 kips/ 60kN
A full kit includes: 1 rod, 1 washer, 1

coupling nut and 1 locking plate
Rod-Lock™ inserts can be used in first row if the

wall does not need to be fixed into the ground.
Most products (keyed, flat tops, benches, and some
barriers) are available for use in the Rod-Lock™
system. Please call for more details. Rod-Lock™
design manual available free of charge for
Professional Engineers.
Block transparent view
Op�on shown with blocks anchored to bo�om row. Another
op�on is to anchor the bo�om block into the ground.

Rod-Lock™ pricing Lock-Block Ltd.
1-800-565-2565 | 604-325-9161
Rod-Lock™ system Lock-Block Ltd. 1-800-565-2565 | 604-325-9161
The Rod-Lock™ system can also be used laterally for even

more stability. The block units can be paired with soil anchors
to create a stable retaining system for a variety of soil types.
Rods can be installed on any axis by offse�ng loca�on.
By connec�ng blocks together, the

wall cross sec�on can be
strengthened drama�cally,
allowing for steeper walls where
available space may be
constrained.
By using soil anchors, walls can be

constructed in areas where it
might not be possible to employ

Page 41 / 41

Blocklist

Uploaded by

Copyright:

Available Formats

Blocklist

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Blocklist

Uploaded by

Copyright:

Available Formats

Lock-Block Ltd.

13171 MITCHELL ROAD, RICHMOND

Lock Block Ltd. utilizes an award-winning state-of-the-art crushing, screening, and

washing process to produce hundreds of thousands of tons of high-quality Recycled

Concrete Aggregate (RCA) products annually.

request. Products qualify for LEED® credits.

3/4” Minus Roadbase

data available upon request. $25 minimum charge before tax.

Effective February 1-28, 2023 Page 1 / 41

1" Clear Crushed & Washed Concrete

1/2" Clear Crushed & Washed Concrete

Sand - Clear Crushed & Washed

data available upon request. $25 minimum charge before tax.

Effective February 1-28, 2023 Page 2 / 41

8"-3" Crushed Concrete

3"-1" Clear Crushed Concrete

1" Minus Navvy Jack

data available upon request. $25 minimum charge before tax.

Effective February 1-28, 2023 Page 3 / 41

Clear Concrete: Broken up, workable pieces, no

Effective February 1-28, 2023 Page 4 / 41

810 mm CMB Median 810 mm CMB Slo�ed 810 mm CMDB Drainage

460 mm to 690 mm 460 CBN Bullnose 690 to 810 Transi�on CTB-2H

810 Bridge Parapet Transi�on

All barriers are available in eye or hook variants unless specified.

690 mm Bullni�on 1070 CMT Parapet Transi�on

Painted barrier Order colour at �me

CRB modifica�on for �ght curvature

Call or email for quote.

810mm CMB barriers on South Fraser Perimeter road, Surrey

Effective February 1-28, 2023 Page 7 / 41

690 mm Lock-Block™ Barrier

Lock-Block™ barriers work with our proprietary

Effective February 1-28, 2023 Page 8 / 41

Effective February 1-28, 2023 Page 9 / 41

Choose Blocks (Pages 11 - 21)

Choose a concrete mix design (Page 22)

Location of Spec Tag

Choose facing (Page 23)

Choose customizations and add-ons

Effective February 1-28, 2023 Page 10 / 41

One-Cross Half Two-Cross Half Three-Cross Half

Tagged 20 MPa Tagged 20 MPa Tagged 20 MPa

Four-Cross Five-Cross Double-Wide

Tagged 20 MPa Tagged 20 MPa Tagged 20 MPa

One-Cross Half Flat Two-Cross Half Flat Three-Cross Half Flat

Tagged 20 MPa Tagged 20 MPa Tagged 20 MPa

Four-Cross Flat Five-Cross Flat Double-Wide Flat

Tagged 20 MPa Tagged 20 MPa Tagged 20 MPa

Tagged 20 MPa Tagged 20 MPa Tagged 20 MPa

Right Corner Bench Le� Slope Bench Right Slope Bench

Tagged 20 MPa Tagged 20 MPa Tagged 20 MPa

Le� Inside Corner Bench Right Inside Corner Bench

Tagged 20 MPa Tagged 20 MPa

Effective February 1-28, 2023 Page 13 / 41

Slope - Le� Slope - Right

Tagged 20 MPa Tagged 20 MPa

Slope Flat - Le� Slope Flat - Right

Tagged 20 MPa Tagged 20 MPa