Scribd
Upload
30 views5 pages

Optical Transceiver

The document describes a 1.25Gb/s SFP optical transceiver that supports data transmission up to 10km on single mode fiber. It provides specifications for features, applications, optical and electrical characteristics, ordering information, and pin descriptions.

Uploaded by

Humberto Torres
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
30 views5 pages

Optical Transceiver

The document describes a 1.25Gb/s SFP optical transceiver that supports data transmission up to 10km on single mode fiber. It provides specifications for features, applications, optical and electrical characteristics, ordering information, and pin descriptions.

Uploaded by

Humberto Torres
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Y-02014C000

1.25G 1310nm 10km SFP TC


Product Features
 Supports data rates of 1.25Gb/s
 Compliant with SFP MSA
 Hot-pluggable SFP footprint
 1310nm FP laser transmitter
 Duplex LC connector
 Built-in digital diagnostic functions
 Up to 10km on 9/125um SMF
 Single power supply 3.3V
 RoHS Compliant
 Class 1 laser product complies with EN 60825-1
 Operating temperature range: 0◦C to 70◦C

Applications
 1.25Gb/s Gigabit Ethernet
 1.063Gb/s Fiber Channel

Description
YOFC’s Y-02014C000 SFP optical transceivers are based on the Gigabit Ethernet IEEE
802.3 standard and Fibre Channel FC-PI Rev.5.0,providing a fast and reliable interface for
GE/FC applications The product implements digital diagnostics via a 2-wire serial bus
compliant with the INF-8074i Small Form Factor Pluggable Multi-Source Agreement (MSA)
and SFF-8472 standard.

Ordering Information
Table 1. Ordering Information
Output
Part Number Transmitter Receiver Sensitivity Reach Temp DDM RoHS
Power
1310nm -11~ -
Y-02014C000 PIN < -24dBm 10km 0~ 70 oC Available Compliant
FP 3dBm

1
Y-02014C000
1.25G 1310nm 10km SFP TC

Absolute Maximum Ratings


Table 2. Absolute Maximum Ratings

Parameter Symbol Min Typ Max Unit Notes


Storage Temperature Ts -40 - 85 °C 1
Relative Humidity Rh 5 - 95 % -
Supply Voltage Vcc -0.5 - 4.0 V -

Notes:
1. Ambient temperature

Recommended Operating Conditions


Table 3. Recommended Operating Conditions
Parameter Symbol Min Typ Max Unit Notes
DR - 1.25 - Gb/s 1
Data Rate
DR - 1.062 - Gb/s 2
-12
Bit Error Rate BER - - 10 -

Operating Temperature TC 0 - 70 ◦C 3

Relative Humidity RH 5 - 95 % -
Supply Current ICC - 175 300 mA 5

Input Voltage VCC 3.14 3.3 3.46 V -

Notes:
2. IEEE 802.3
3. FC-PI-2 Rev 5
4. Case temperature
5. For electrical power interface

Transmitter Optical Characteristics


Table 4. Transmitter Optical Characteristics
Parameter Symbol Min Typ Max Unit Notes
Output Optical Power PTX -11 - -3 dBm 1

Optical Center Wavelength λC 1270 - 1355 nm -


Optical Modulation Amplitude OMA 174 - - µW 2
Extinction Ratio ER 9 - - dB -
Tx Disabled Power PTX_DIS - - -45 dBm -
Spectral Width (RMS) Δλ - - 3 nm -
Optical Rise/Fall Time (20%-
tr/tf - 150 260 ps -
80%)
Transmitter dispersion penalty TDP - - 3.3 dB -

2
Y-02014C000
1.25G 1310nm 10km SFP TC
Parameter Symbol Min Typ Max Unit Notes
Relative Intensity Noise RIN - - -120 dB/Hz -
Generated Jitter (peak to peak) GJPP - - 0.15 UI -
Optical Return Loss Tolerance ORL - - 12 dB -
Output Eye Compliant with IEEE802.3z standard
Notes:
1. Class 1 Product
2. Equivalent extinction ratio specification for FC

Receiver Optical Characteristics


Table 5. Receiver Optical Characteristics
Parameter Symbol Min Typ Max Unit Notes
Receiver Overload POL -3 - - dBm -
Optical Center Wavelength λC 1260 - 1360 nm -
Receiver Sensitivity - - - -24 dBm -
OMA Rx Sensitivity SOMA - - -22 dBm -
Optical Return Loss TORL 12 - dB -
Receiver Reflectance RREFL - - -12 dB -

Generated Jitter(peak to peak) RJp−p - - 0.15 UI -

LOS Assert LOS-A -35 - dBm -


LOS De-Assert LOS-D - - -27 dBm -
LOS Hysteresis LOS-H 0.5 - dB -

Transceiver Electrical Characteristics


Table 6. Transceiver Electrical Characteristics
Parameter Symbol Min Typ Max Unit Notes
Transmitter
Input differential impedance RIN - 100 - Ω -
Single ended data input swing VIN PP 250 - 1200 mV -
Transmit disable voltage VD VCC-1.3 - VCC V -
Transmit enable voltage VEN VEE - VEE+0.8 V -
Transmit disable assert time - - - 10 µs -
Receiver
Single ended data output swing VOUT PP 300 800 mV -
Data output rise/fall time (20%-
tr/tf - - 300 PS -
80%)

3
Y-02014C000
1.25G 1310nm 10km SFP TC
Parameter Symbol Min Typ Max Unit Notes
RX_LOS Loss of signal
VOH VCC-0.5 VCC HOST V -
(LOS)
Normal
VOL VEE VEE+0.5 V -
Operation

Pin Description
Table 7. Pin Description
PIN Symbol Description Notes
1 VEET Transmitter ground (common with receiver ground) 1
2 TX_FAULT Transmitter Fault. Not supported -
3 TX_DISABLE Transmitter Disable. Laser output disabled on high or
2
open
4 MOD_DEF(2) Module Definition 2. Data line for serial ID 3
5 MOD_DEF(1) Module Definition 1. Clock line for serial ID 3
6 MOD_DEF(0) Module Definition 0. Grounded within the module 3
7 Rate Select No connection required -
8 LOS Loss of Signal indication. Logic 0 indicates normal
4
operation
9 VEER Receiver ground (common with transmitter ground) 1
10 VEER Receiver ground (common with transmitter ground) 1
11 VEER Receiver ground (common with transmitter ground) 1
12 RD- Receiver Inverted DATA out. AC coupled -
13 RD+ Receiver Non-inverted DATA out. AC coupled -
14 VEER Receiver ground (common with transmitter ground) 1
15 VCCR Receiver power supply -
16 VCCT Transmitter power supply -
17 VEET Transmitter ground (common with receiver ground) 1
18 TD+ Transmitter Non-Inverted DATA in. AC coupled -
19 TD- Transmitter Inverted DATA in. AC coupled -
20 VEET Transmitter ground (common with receiver ground) 1

Notes:
1. Circuit ground is isolated from chassis ground
2. Disabled:TDIS>2Vor open, Enabled: TDIS<0.8V
3. Should Be pulled up with 4.7k –10k ohm on host board to a voltage between 2V and
3.6V
4. LOS is open collector output

4
Y-02014C000
1.25G 1310nm 10km SFP TC

You might also like