Scribd
Upload
26 views1 page

Assignment

The document contains 5 assignments for a Technical Drawing 1 course. It includes instructions on how to draw and construct various geometric shapes and conic sections using different methods, and differentiate between related concepts.

Uploaded by

nifemiowolabi950
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views1 page

Assignment

The document contains 5 assignments for a Technical Drawing 1 course. It includes instructions on how to draw and construct various geometric shapes and conic sections using different methods, and differentiate between related concepts.

Uploaded by

nifemiowolabi950
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

EKITI STATE UNIVERSITY, ADO EKITI

FACULTY OF ENGINEERING
DEPARTMENT OF MECHANICAL ENGINEERING
FIRST SEMESTER 2023/2024 ACADEMIC SESSION
TECHNICAL DRAWING 1 ENG 131 ASSIGNMENT I
1. Draw a line AB = 120 mm and bisect the line.
2. Draw a line AB = 120 mm and erect a perpendicular to the line.
3. Draw an arc of radius 45 mm and locate the centre of the arc.
4. Differentiate between ANSI and ISO styles of dimensioning.
EKITI STATE UNIVERSITY, ADO EKITI
FACULTY OF ENGINEERING
DEPARTMENT OF MECHANICAL ENGINEERING
FIRST SEMESTER 2023/2024 ACADEMIC SESSION
TECHNICAL DRAWING 1 ENG 131 ASSIGNMENT II
1. Draw a line AB = 120 mm and divide the line into 14 equal parts.
2. Draw an inscribed circle to a triangle of AC = 120 mm, AB = BC = 110 mm.
3. Draw a triangle with sides AB = 60 mm, BC = 50 mm and AC = 70 mm and produce a
circumscribed circle on the triangle.
4. Highlight four applications of the bisection of angles and lines.

EKITI STATE UNIVERSITY, ADO EKITI


FACULTY OF ENGINEERING
DEPARTMENT OF MECHANICAL ENGINEERING
FIRST SEMESTER 2023/2024 ACADEMIC SESSION
TECHNICAL DRAWING 1 ENG 131 ASSIGNMENT III
1. Differentiate between regular and irregular polygons.
2. Construct a regular pentagon, hexagon, heptagon, octagon, nonagon, decagon,
hendecagon and dodecagon with the base AB = 40 mm.
3. Using the concentric circle method, draw an ellipse with a major diameter of 150 mm
and a minor diameter of 100 mm.
EKITI STATE UNIVERSITY, ADO EKITI
FACULTY OF ENGINEERING
DEPARTMENT OF MECHANICAL ENGINEERING
FIRST SEMESTER 2023/2024 ACADEMIC SESSION
TECHNICAL DRAWING 1 ENG 131 ASSIGNMENT IV
1. Using the rectangular method, draw an ellipse with a major axis of 125 mm and a minor
axis of 100 mm.
2. Draw an ellipse when the eccentricity is 2/3 and the distance of the focus from the
directrix is 50 mm. Construct a tangent and a normal at 70 mm from the directrix.
3. Using the locus method, draw a hyperbola with an eccentricity of 3/2. Let the
distance of the focus from the directrix be 50 mm, and construct a tangent at 25
mm from the directrix.
4. What do you understand as Locus and Conic?
5. Differentiate between ellipse, parabola and hyperbola using eccentricity
EKITI STATE UNIVERSITY, ADO EKITI
FACULTY OF ENGINEERING
DEPARTMENT OF MECHANICAL ENGINEERING
FIRST SEMESTER 2023/2024 ACADEMIC SESSION
TECHNICAL DRAWING 1 ENG 131 ASSIGNMENT V
1. Construct an involute of a circle with a diameter of 50 mm.
2. Draw a cycloid with a radius of 25 mm using the locus method.
Kindly incorporate your unique number into every assignment to be submitted.

You might also like