EBM Papst Tender Specification AxiBlade 630-910 Eng

Tender specification for
EC axial fans – AxiBlade
Sizes 630 to 910
Direct-drive EC axial fans - AxiBlade with high-performance axial impeller, mounted on a GreenTech EC
external rotor motor with integrated control electronics.
Square full nozzle, corrosion-resistant sendzimir galvanized sheet steel, coated with black plastic RAL 9005,
optimized inlet ring and optional integrated discharge vanes, aerodynamically optimized guard grill in accordance with
DIN EN ISO 13857, made of steel, coated with black plastic RAL 9005.
Profiled blade geometry with winglets at the blade tips; impeller made of highly resistant composite material. Motor
impeller statically and dynamically balanced on two planes to balancing grade G 6.3 in accordance with DIN/ISO
21940.
GreenTech EC external rotor motor surpasses efficiency class IE4, magnets with no rare earths, maintenance-free
ball bearings with long-term lubrication, theoretical nominal service life of at least 40,000 hours of operation,
installation with horizontal and vertical motor shaft, soft start, integrated current limitation, extended voltage input
3~380-480 V, 50/60 Hz, fan can be used with all standard power supply networks without any change in air
performance. See data sheet for installation position and temperature range.
Compact electronics; no time-consuming installation work involving shielded wiring; extremely low-noise commutation
logic; 100% open-loop speed control, soft start motors, RS485/MODBUS RTU interface; pre-set operating
parameters, RFID wireless parameterization, integrated LED status indicator.
Connection via easy-to-install robust integrated terminal box, environmentally resistant cable glands.
Any work required for isolation from structure-borne noise is to be performed by the customer.
Fan satisfies the applicable EMC guidelines and requirements with regard to circuit feedback; documentation and
marking conform to the applicable EU Directives.
Reliable performance data, air performance measurements with guard grill on intake-side chamber test rig according
to ISO 5801 and DIN 24163, sound measurements with guard grill in anechoic rooms according to DIN EN ISO 3745.
Conformity with standard EN 61800-5-1; CE, as well as extensive approvals as per UL 1004-7 + 60730; C22.2 No.77
+ CAN/CSA-E60730-1 and EAC.
Integrated protective devices:

- Alarm relay with floating contacts (250 V AC/2 A, cos φ = 1)
- Locked-rotor protection
- Phase failure detection
- Line undervoltage detection
- Thermal overload protection for electronics and motor
- Short-circuit protection
- Motor current limitation
Optional:
- Other and specific requirements on request
Subject to change / Revision date 2020/08/18

ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 ·74673 Mulfingen ·Phone: +49 7938 81-0 ·Fax: +49 7938 81-110 ·www.ebmpapst.com ·[email protected]
Tender specification for
Technical data:
Fan types ___- ________ - ________ - ____
Air flow qV = ___________________________ m3/h
Static pressure increase pfs = ___________________________ Pa
Overall static efficiency ηes = ___________________________ %
Operating speed n = ___________________________ rpm
Motor type = EC motor
Type of control = Closed-loop speed control, 0-100%
Motor efficiency class = IE4
Total power consumption Ped = ___________________________ kW
Specific fan power SFP = ___________________________ kW/(m³/s)
Nominal voltage UN = ___________________________ V
Line frequency f = 50 / 60 Hz
Nominal current IN = ___________________________ A
Protection class = IP55
Sound power level LW A(A, in) = _______ / LWA(A, out) = _______ dB(A)
Sound pressure level (at 1 m) LpA(A, in) = _______ / LpA(A, out) = _______ dB(A)
Perm. ambient temperature T = ____________ to ____________ °C
Weight of fan m = ___________________________ kg
Product photo
System with guide vanes System without guide vanes
Refer to data sheet for technical data, dimensions and connections
Subject to change / Revision date 2020/08/18

ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 ·74673 Mulfingen ·Phone: +49 7938 81-0 ·Fax: +49 7938 81-110 ·www.ebmpapst.com ·[email protected]

EBM Papst Tender Specification AxiBlade 630-910 Eng

Uploaded by

Copyright:

Available Formats

EBM Papst Tender Specification AxiBlade 630-910 Eng

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

EBM Papst Tender Specification AxiBlade 630-910 Eng

Uploaded by

Copyright:

Available Formats

Tender specification for

EC axial fans – AxiBlade

Sizes 630 to 910

Integrated protective devices:

Subject to change / Revision date 2020/08/18

Refer to data sheet for technical data, dimensions and connections

Subject to change / Revision date 2020/08/18

You might also like