Scribd
Upload
14 views

Arduino Temperature and Humidity Sensor LCD

Uploaded by

Hahaha
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
14 views

Arduino Temperature and Humidity Sensor LCD

Uploaded by

Hahaha
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Arduino Temperature and Humidity Sensor - LCD Lesson

https://arduinogetstarted.com/tutorials/arduino-temperature-humidity-sensor-lcd

SKETCH

#include <LiquidCrystal_I2C.h>

#include "DHT.h"

#define DHTPIN 2

#define DHTTYPE DHT11

LiquidCrystal_I2C lcd(0x3F, 16, 2); // I2C address 0x3F, 16 column and 2 rows

DHT dht(DHTPIN, DHTTYPE);


void setup()

dht.begin(); // initialize the sensor

lcd.init(); // initialize the lcd

lcd.backlight(); // open the backlight

void loop()

delay(2000); // wait a few seconds between measurements

float humi = dht.readHumidity(); // read humidity

float tempC = dht.readTemperature(); // read temperature

lcd.clear();

// check if any reads failed

if (isnan(humi) || isnan(tempC)) {

lcd.setCursor(0, 0);

lcd.print("Failed");

} else {

lcd.setCursor(0, 0); // start to print at the first row

lcd.print("Temp: ");

lcd.print(tempC); // print the temperature

lcd.print((char)223); // print ° character

lcd.print("C");

lcd.setCursor(0, 1); // start to print at the second row

lcd.print("Humi: ");

lcd.print(humi); // print the humidity

lcd.print("%");

You might also like