LV Live

working tools

Insulated tools 90
Jumper clamps,
cables and accessories 115
Cover-up equipment 118
Cable identifier 122
 Insulated Tools
Find the tools to meet your needs!
Insulated tools must comply with the NF EN 60900 and IEC 60900 standards. IEC 60900 2012
To meet these standards, insulated tools undergo 10 000 volts through
electrical testing and many mechanical tests, including impact tests,
on of the insula
tearing tests, and puncture tests. For working live at nominal voltage up esi tin
to 1000 V a.c and 1500 V d.c. dh

g
a

ma
or f

teri
Test

el
Impact Test
50 daN

me retardancy
Fla
Indentation
ectric Test
Diel

20 N
5000 V
10 000 V

Dual Layer Insulated Tools

White insulating Orange insulating

Dual Material Insulated Tools inner layer. outer layer.

High performing
Material burnished steel.
SOFTGRIP ®

Label.
Uniform guard with
insulating layer.
Label. Chrome steel body, mat finish.

 SPECIAL FEATURES

 SPECIAL FEATURES
• Extensive product line for work on live cables; mainly
used by LV Live Line Working teams.
• Ergonomic.
• Products suitable for work on live cables, particularly low • Dual-layer with a white insulating layer.
voltage (30 cm area of a live bare wire). • High mechanical strength in the layers due to dipping
• Ergonomic. technique.
• Dual material with non-skid "SOFTGRIP"® injected • Steel with high mechanical properties.
material for operator comfort.

Routine test: each tool is tested at 10kV for ten seconds.

90
LV Live working tools / Insulated Tools
 LV Live working tools

Insulated tools

Flat blade screwdriver, dual material

Reference g IEC 60900
mm mm
Chrome - molybdenum
MO-72002 2.5 60 30
vanadium steel blade.
MO-72003 3 100 40
MO-72004 4 125 50
MO-72005 5 150 70
MO-72006 6 150 90 Dual material handle
MO-72008 8 175 150 Anti slip material.
MO-72010 10 200 220

POZIDRIV screwdriver, dual material Dual material handle

Anti slip material.
Reference PZ N° g
mm Chrome - molybdenum
MO-72040 PZ 0 60 25 vanadium steel blade.
MO-72042 PZ 1 100 60
MO-72044 PZ 2 125 90
MO-72046 PZ 3 150 150
MO-72048 PZ 4 200 220 Injection molded
insulation.

PHILLIPS screwdriver, dual material

Reference PH N° g
mm Chrome - molybdenum
MO-72030 PH 0 60 25 vanadium steel blade.
MO-72032 PH 1 100 60
MO-72034 PH 2 125 90
MO-72036 PH 3 150 150
MO-72038 PH 4 200 220
Dual material handle
Anti slip material.

TORX screwdriver, dual material

Reference N° g
mm
MO-72056 T6 50 25
MO-72057 T7 50 25 Chrome - molybdenum
MO-72058 T8 50 25 vanadium steel blade.
MO-72059 T9 75 35
MO-720510 T 10 75 35
MO-720515 T 15 75 50
MO-720520 T 20 100 70
MO-720525 T 25 100 80 Dual material handle
MO-720527 T 27 115 90 Anti slip material.
MO-720530 T 30 125 100
MO-720540 T 40 125 120
MO-720545 T 45 150 160
MO-720550 T 50 175 200

N° Tool number mm
Diameter mm Blade length g Weight 91
LV Live working tools / Insulated tools
 Insulated tools

Hexagonal screwdriver ALLEN, dual material

On flats
Reference (mm) g IEC 60900
mm
MO-68402 2.5 75 40
MO-68403 3 75 50
Chrome - molybdenum
MO-68404 4 100 70 vanadium steel blade.
MO-68405 5 100 80
MO-68406 6 125 100
MO-68408 8 150 150

Dual material handle

Anti slip material.

Cable cutter plier, dual material

g Chrome-vanadium steel.
Reference mm mm Cu / Al
MO-72200 160 Ø 5 max 238

Dual material handle

Anti slip material.

Wire stripping plier, dual material

Reference mm mm Cu / Al
g
Chrome-vanadium steel.
MO-72172 160 0.5 to 10 mm2 170

Dual material handle

Anti slip material.

Universal plier, dual material

Reference mm
mm
g
MO-72102 180 Ø 3.5 Ø 2.2 Ø 1.5 280 Chrome-vanadium steel.

Dual material handle

Anti slip material.

92
LV Live working tools / Insulated tools
 LV Live working tools

Insulated tools

Flat nose plier, dual material

Reference g IEC 60900
mm
Chrome-vanadium steel.
MO-72132 160 170

Dual material handle

Anti slip material.

Bent snipe nose plier, dual material

Reference mm
mm
g
MO-72142 160 Ø 2.5 Ø 1.6 Ø 1 170

Chrome-vanadium steel.

Dual material handle

Anti slip material.

Round nose plier, dual material

Reference mm g
MO-72122 160 160

Chrome-vanadium steel.

Dual material handle

Anti slip material.

Chrome-vanadium steel.
Water pump plier, dual material
Reference mm
mm g
MO-72155 250 32 350

Dual material handle

Double rack slipt joint. Anti slip material.

Side cutter plier, dual material

Reference mm
mm
g
MO-72162 160 Ø 3 Ø 2.2 Ø 1.5 210

Chrome-vanadium steel.

Dual material handle

Anti slip material.

mm Total length mm Blade length mm

Cutting capacity mm
Stripping capacity mm
Maximal opening g Weight 93
LV Live working tools / Insulated tools
Steel: 75 daN / mm2 Steel: 180 daN / mm2 Steel: 220 daN / mm2
 Insulated tools

Screwdrivers kit, dual material

Reference KIT-23 IEC 60900
Composition
MO-72004 Flat blade screwdriver de 4 x 125 mm
MO-72006 Flat blade screwdriver 6 x 150 mm
MO-72008 Flat blade screwdriver 8 x 175 mm
MO-72042 POZIDRIV screwdriver N°1
MO-72044 POZIDRIV screwdriver N°2

Pliers kit, dual material

Reference KIT-27
Composition
MO-72102 Universal plier 180 mm
MO-72155 Water pump plier 250 mm
MO-72172 Wire stripping plier 160 mm
MO-72142 Bent snipe nose plier 160 mm
MO-72200 Cable cutter 160 mm

Intervention kit, dual material

Reference KIT-24
Composition
MO-72004 Flat blade screwdriver 4 x 125 mm
MO-72006 Flat blade screwdriver 6 x 150 mm
MO-72008 Flat blade screwdriver 8 x 175 mm
MO-72042 POZIDRIV screwdriver N°1
MO-72044 POZIDRIV screwdriver N°2
MO-72172 Wire stripping plier 160 mm
MO-72142 Bent snipe nose plier 160 mm
MO-72200 Cable cutter 160 mm

Complete intervention kit, dual material

Reference KIT-25
Composition
MO-72004 Flat blade screwdriver 4 x 125 mm
MO-72006 Flat blade screwdriver 6 x 150 mm
MO-72008 Flat blade screwdriver 8 x 175 mm
MO-72042 POZIDRIV screwdriver N°1
MO-72044 POZIDRIV screwdriver N°2
MO-72102 Universal plier 180 mm
MO-72155 Water pump plier 250 mm
MO-72172 Wire stripping plier 160 mm
MO-72142 Bent snipe nose plier 160 mm
MO-72200 Cable cutter 160 mm

94
LV Live working tools / Insulated tools
 LV Live working tools

Insulated tools

Screwdrivers kit dual material

IEC 60900

Photos of KIT-23SCP

KIT-23C KIT-23S KIT-23SC2 KIT-23SH KIT-23P KIT-23SP2 KIT-23SCP KIT-23CH KIT-23PH

MO-72003 flat blade screwdriver 3 x 100 • • • • •
MO-72004 flat blade screwdriver 4 x 125 • • • •
MO-72005 flat blade screwdriver 5 x 150 • • • • •
MO-72006 flat blade screwdriver 6 x 150 • • •
MO-72008 flat blade screwdriver 8 x 175 •
MO-72030 screwdriver PH 0 x 60 •
MO-72032 screwdriver PH 1 x 100 • • • •
MO-72034 screwdriver PH 2 x 125 • • • •
MO-72036 screwdriver PH 3 x 150 • •
MO-72040 screwdriver PZ 0 x 60 •
MO-72042 screwdriver PZ 1 x 100 • • • •
MO-72044 screwdriver PZ 2 x 125 • • • •
MO-72046 screwdriver PZ 3 x 150 • •
MO-68403 hexagonal screwdriver 3 x 75 • • •
MO-68404 hexagonal screwdriver 4 x 100 • • •
MO-68404 hexagonal screwdriver 5 x 100 • • •
Delivered under blister.

95
LV Live working tools / Insulated tools
 Insulated tools

Flat blade screwdriver

Reference mm
g IEC 60900
mm
MO-65202 6.5 40 38
MO-65203 3 100 33
MO-65204 3.5 100 37
Chrome - molybdenum
MO-65205 4 100 46 vanadium steel blade.
MO-65206 5.5 125 75
MO-65207 6.5 150 94
MO-65209 8 175 165
MO-65211 10 200 195
Set of 3 screwdriverss
MO-650-D MO-65205 / MO-65207 / MO-65209
Set of 4 screwdrivers
MO-652-D MO-65203 / MO-65205 / MO-65207 / MO-65209

Flat blade screwdriver with recessed blade

Reference mm
g
mm
MO-65200D 6.5 40 36
MO-65202D 2 70 16
MO-65203D 3 100 30 Chrome - molybdenum
MO-65204D 4 120 52 vanadium steel blade.
MO-65205D 5.5 100 50
MO-652055D 5.5 150 72
MO-65206D 6.5 150 36
MO-65208D 8 150 92
MO-652082D 8 200 142
MO-65210D 10 150 166
MO-652102D 10 250 282
MO-65212D 12 250 318

PHILLIPS screwdriver
Reference PH N° g
mm
MO-65230 PH 0 60 25 Chrome - molybdenum
vanadium steel blade.
MO-65232 PH 1 80 50
MO-65234 PH 2 100 75
MO-65236 PH 3 150 150
MO-65238 PH 4 200 230
MO-653-D Set of 3 screwdrivers N°0. N°2 et N°3

PHILLIPS screwdriver with recessed blade

Reference mm
g
mm
MO-65232D PH 0 (4) 75 50 Chrome - molybdenum
MO-652321D PH 0 (4) 150 55 vanadium steel blade.
MO-65233D PH 1 (5) 100 60
MO-65234D PH 2 (6) 125 82
MO-65236D PH 3 (8) 150 146
MO-65238D PH 4 (10) 200 256

96
LV Live working tools / Insulated tools
 LV Live working tools

Insulated tools

POZIDRIV screwdriver
Reference PZ N° g IEC 60900
mm
MO-65240 PZ 0 60 25 Chrome - molybdenum
vanadium steel blade.
MO-65242 PZ 1 80 50
MO-65244 PZ 2 100 75
MO-65246 PZ 3 150 150
MO-65248 PZ 4 200 230

POZIDRIV screwdriver with recessed blade

Reference mm
g
mm
MO-652405D 5 40 34
MO-652406D 6 40 34
Chrome - molybdenum
MO-65244D PZ 0 (4) 75 50
vanadium steel blade.
MO-652441D PZ 0 (4) 150 55
MO-65245D PZ 1 (5) 100 60
MO-65246D PZ 2 (6) 125 82
MO-65248D PZ 3 (8) 150 146
MO-652410D PZ 4 (10) 200 256

Screwdriver block terminal flat/PHILLIPS

Reference mm mm
MO-65405 5 80
MO-65406 6 100
Chrome - molybdenum
vanadium steel blade.

Screwdriver block terminal flat/POZIDRIV

Reference mm mm

MO-65505 5 80
MO-65506 6 100

Chrome - molybdenum
vanadium steel blade.

For fuse boxes, connecting boxes, circuit breaker terminal blocks.

mm Blade length mm
Diameter g Weight 97
LV Live working tools / Insulated tools
 Insulated tools

Universal plier
Reference mm g MO-66002 IEC 60900
MO-66001 160 210
MO-66002 180 260
MO-66003 200 300 Special steel,
MO-66005 250 510 oil-hardened.
Burnished head.

MO-66005

Flat nose plier

Reference mm g
MO-66300 145 115
MO-66301 160 160 Chrome-vanadium
steel.
MO-66302 170 180

Bent snipe nose plier

Reference mm g
Chrome-vanadium
MO-66402 160 160 steel.
MO-66404 200 185

Round nose plier

Reference mm g
Chrome-vanadium
MO-66202 160 150 steel.

Long nose plier with side cutter

Reference mm g
Chrome-vanadium
MO-66102 160 145
steel.

Plug plier for preinsulating pin terminals

Reference mm g
Chrome-vanadium
MO-66105 200 200 steel for pin
terminals 2.8/5/6.35 mm.

98
LV Live working tools / Insulated tools
 LV Live working tools

Insulated tools

Insulating universal plier

Reference mm g
mm
IEC 60900
MO-66000C 200 16 mm2 copper 170

Composite insulation.

Insulating flat nose plier

Reference mm g Composite insulation.
mm

MO-66303C 190 16 mm2 copper 110

Insulating bent half round nose plier

Reference mm g
mm

MO-66404CC 210 16 mm2 copper 110

Composite insulation.

Chrome-vanadium
Waterpump plier steel.

Reference mm mm g
MO-66502 250 33 250
MO-66505 250 33 405
MO-66500 410 45 1 000
Double rack slip joint
(MO-66505 only).

MO-67402
End cutting pliers
mm
Chrome-vanadium
Reference mm g steel.
MO-67401 140 Ø 2 max Ø 1 max 165
MO-67402 160 Ø 3 max Ø 2 max 210
MO-67404 200 Ø 4 max Ø 3 max 450
MO-67404

mm Total length mm
Maximal opening mm Cutting capacity g Weight 99
LV Live working tools / Insulated tools
Steel: 75 daN / mm2 Steel: 180 daN / mm2 Steel: 220 daN / mm2
 Insulated tools

Diagonal cutting plier

IEC 60900
Reference mm
mm
g
MO-67101 140 Ø2 Ø 1 Ø 0.5 150
MO-67102 160 Ø 3 Ø 2.2 Ø 1.5 180 Chrome-vanadium
MO-67103 190 Ø 3.2 Ø 2.5 Ø 2 210 steel.

Chrome-vanadium
steel.

Cable cutter
Reference mm mm
g
MO-67500 180 Ø 5 Cu / Al 420

MO-67501
Cable cutter
Chrome-vanadium
Reference mm mm
g steel.
MO-67501 170 Ø 15 max 285
MO-67502 230 Ø 20 max 520

MO-67502

Cable cutter
MO-67700
mm é
Reference mm mm mm

185 mm2
MO-67700 590 30 Copper/ 2.5
Aluminium Chrome-vanadium
steel.
MO-67701 765 20 Ø 12 2.8
Aluminium

MO-67701

100
LV Live working tools / Insulated tools
 LV Live working tools

Insulated tools

Wire stripping plier

IEC 60900
Reference
mm
mm
Stripping capacity
mm2
g Chrome-vanadium
steel.
MO-67302 160 0.5 to 10 170

Wire stripping plier fully insulated

Reference mm
mm
Stripping capacity g
mm2

MO-67302C 260 0.5 to 10 175

Stripping tool for LV cables

Reference mm
mm
Stripping capacity
g
MO-67304 220 Ø 8 to 21 mm 470

Aluminium casting plier.

Stripping tool for LV cables

Reference mm
mm
Stripping capacity
g
MO-67305 265 Ø 21 to 35 mm 650
MO-67306 270 Ø 26 to 52 mm 670

Aluminium casting plier.

Insulated knife
Reference mm
g
mm

MO-61001 180 62 110

MO-61002 180 50 110 MO-61001
Delivered with pouch. Curved blade.

MO-61002

mm Total length mm Cutting capacity

é
mm Thickness mm
Stripping capacity mm Maximal opening g Weight 101
LV Live working tools / Insulated tools
Steel: 75 daN / mm2 Steel: 180 daN / mm2 Steel: 220 daN / mm2
 Insulated tools

Ratchet cable cutter

IEC 60900
mm
Reference mm Copper Aluminium g
section mm2 section mm2

MO-67599 Ø 32 max 180 250 900

MO-67600 Ø 38 max 240 300 950
MO-67601 Ø 55 max 300 450 975
MO-67599

Treated forged steel blade.

MO-67600

Frontal ratchet cable cutter Treated forged

steel blade.
mm
Reference mm Copper
section mm2
Aluminium
section mm2
g
MO-67611 Ø 32 max 180 250 900

Protected hard forged steel.

Hacksaw
Reference mm mm
g
MO-64501 263 130 150 MO-64502
MO-64502* 450 300 780
* Delivered with 2 blades.

Two blade positions. Tension blade

Flush and 90° cutting supplied. by screw.

MO-64501

102
LV Live working tools / Insulated tools
 LV Live working tools

Insulated tools

Adjustable spanner
Reference mm g IEC 60900
mm
MO-69002 210 24 max 295
MO-69003 250 28 max 450
MO-69004 310 34 max 550
MO-69005 385 43 max 1 350

Reversible ratchet ring spanner

mm

Reference g
MO-69210 10 160 Special steel, oil-hardened.

MO-69213 13 190
MO-69216 16 350
MO-69217 17 370
MO-69218 18 380
MO-69219 19 390

Special steel insulated inserts

using one-piece injection.
Combination wrench
mm

Reference g
mm
MO-68701 150 x 150 6-8-10-12 225
MO-68702 150 x 150 8-10-12-14 260
MO-68703 150 x 150 7-9-11-13 250
MO-68704 150 x 150 8-10-13-17 250
Special steel
MO-68705 150 x 150 14-17-18-21 400 insulated inserts
using one-piece
injection.

Right angle male hexagonal key

mm

Reference g
mm
MO-69903 83 x 123 3 30
MO-69904 84 x 124 4 40
MO-69905 84 x 126 5 50
MO-69906 85 x 126 6 70
MO-69908 87 x 128 8 110
MO-69910 87 x 130 10 150
MO-69912 90 x 132 12 240

mm
Total length mm Blade length
g
Weight 103
LV Live working tools / Insulated tools
mm Maximal opening mm
Cutting capacity mm
Diameter
 Insulated tools

Open jaw spanner

mm mm IEC 60900
Reference g Reference g
MO-68006 6 20 MO-68019 19 170
MO-68007 7 20 MO-68020 20 185
MO-68008 8 40 MO-68021 21 200
MO-68009 9 40 MO-68022 22 220
MO-68010 10 45 MO-68023 23 250
MO-68011 11 50 MO-68024 24 260
MO-68012 12 60 MO-68025 25 280
MO-68013 13 80 MO-68026 26 300
MO-68014 14 100 MO-68027 27 340
MO-68015 15 110 MO-68028 28 360
MO-68016 16 120 MO-68029 29 400
MO-68017 17 140 MO-68030 30 500
MO-68018 18 160 MO-68032 32 570
MO-68008/19 8 open end spanners set: 8 / 10 / 11 / 12 / 13 / 14 / 17 / 19 mm 685

Cranked ring spanner

mm mm

Reference g Reference g
MO-68106 6 30 MO-68119 19 200
MO-68107 7 35 MO-68120 20 240
MO-68108 8 40 MO-68121 21 260
MO-68109 9 45 MO-68122 22 260
MO-68110 10 50 MO-68123 23 270
MO-68111 11 65 MO-68124 24 280
MO-68112 12 80 MO-68125 25 300
MO-68113 13 100 MO-68126 26 360
MO-68114 14 120 MO-68127 27 400
MO-68115 15 150 MO-68128 28 440
MO-68116 16 180 MO-68129 29 480
MO-68117 17 190 MO-68130 30 500
MO-68118 18 195 MO-68132 32 540

Hexagonal spanner with T handle

mm

Reference mm g
MO-68610 145 10 145
MO-68613 145 13 185
MO-68614 145 14 220
MO-68620 135 20 350
MO-68621 135 21 370

104
LV Live working tools / Insulated tools
 LV Live working tools

Insulated tools

Pipe wrench
mm
Socket g IEC 60900
Reference head
MO-68205 6 sided 5 20
MO-68206 6 sided 6 30
MO-68207 6 sided 7 35
MO-68208 6 sided 8 50
MO-68209 6 sided 9 60
MO-68210 6 sided 10 60
MO-68211 6 sided 11 90
MO-68212 6 sided 12 95 mm
Socket g
MO-68213 6 sided 13 130 Reference head
MO-68214 6 sided 14 160 MO-68223 6 sided 23 600
MO-68215 6 sided 15 170 MO-68224 6 sided 24 650
MO-68216 6 sided 16 220 MO-68225 6 sided 25 700
MO-68217 6 sided 17 230 MO-68226 6 sided 26 750
MO-68218 6 sided 18 280 MO-68227 6 sided 27 800
MO-68219 6 sided 19 320 MO-68228 6 sided 28 850
MO-68220 6 sided 20 340 MO-68229 6 sided 29 900
MO-68221 6 sided 21 470 MO-68230 6 sided 30 950
MO-68222 6 sided 22 500 MO-68232 6 sided 32 1000

Hexagonal spanner with T handle

mm

Reference mm g
MO-68310 305 10 350
MO-68311 305 11 360
MO-68312 305 12 370
MO-68313 305 13 400
MO-68314 305 14 450
MO-68316 305 16 560
MO-68317 305 17 650
MO-68319 305 19 750
MO-68321 305 21 800
MO-68322 305 22 850
MO-68713 405 13 650
MO-68714 405 14 800
MO-68717 405 17 900

T wrench 3/8” (9.35 mm) and

1/2’’ (12.7 mm) square drive MO-69544
mm

Reference mm g
MO-69523 130 3.8” 350
MO-69533 210 3.8” 450
MO-69544 350 1.2” 600

mm Maximal opening mm Total length g Weight 105

mm
LV Live working tools / Insulated tools
On flats mm
Diameter
 Insulated tools

6 sided female socket 3/8” (9.53 mm)

square drive - Metric and U.S Standard IEC 60900

mm mm

Reference g Reference g
MO-69306 6 25 MO-69323 23 100
MO-69307 7 30 MO-69324 24 120
MO-69308 8 30 MO-697-1/4SAE 1/4 25 Chrome steel.
MO-69309 9 30 MO-697-5/16 5/16 30
MO-69310 10 35 MO-69735 3/8 30
MO-69311 11 35 MO-69736 7/16 35
MO-69312 12 35 MO-69737 1/2 40
MO-69313 13 45 MO-69738 9/16 45
MO-69314 14 45 MO-69739 5/8 55
MO-69315 15 50 MO-69740 11/16 60
MO-69316 16 55 MO-69741 3/4 70
MO-69317 17 60 MO-69742 13/16 85
MO-69318 18 65 MO-697-7/8 7/8 90
MO-69319 19 70 MO-697-15/16 15/16 105
MO-69321 21 85 MO-697-1SAE 1 110
MO-69322 22 90
Others references, consult us.

12 sided female socket 1/2”

(12.7 mm) square drive
mm mm

Reference g Reference g
MO-69408 8 60 MO-69418 18 80
MO-69410 10 60 MO-69419 19 85
MO-69411 11 65 MO-69420 20 90
MO-69412 12 70 MO-69421 21 100
MO-69413 13 70 MO-69422 22 100
MO-69414 14 70 MO-69423 23 115
MO-69415 15 75 MO-69424 24 125
MO-69416 16 75 MO-69429 29 135
MO-69417 17 80 MO-69430 30 140

106
LV Live working tools / Insulated tools
 LV Live working tools

Insulated tools

6 sided female socket 3/8” (9.53 mm)

square drive long series IEC 60900
mm mm

Reference g Reference g Chrome steel. L: 65 mm.

MO-69608 8 55 MO-69616 16 130
MO-69609 9 65 MO-69617 17 145
MO-69610 10 75 MO-69618 18 160
MO-69611 11 85 MO-69619 19 180
MO-69612 12 95 MO-69621 21 200
MO-69613 13 100 MO-69622 22 220
MO-69614 14 115 MO-69624 24 240
Others references, consult us.

6 sided male hex Key / Socket

3/8” square drive
Steel.
mm

Reference g
MO-69393 3 45
MO-69394 4 55
MO-69395 5 60
MO-69396 6 65
MO-69397 7 70
MO-69398 8 70
MO-693100 10 80

Male TORX 3/8” square drive

Reference mm mm g
MO-69T15 TX15 60 50
MO-69T20 TX20 60 55
MO-69T30 TR30 105 60
MO-69T40 TR40 105 80
Torx.
MO-69T50 TR50 105 100

Extension pieces 3/8” square drive

Reference mm mm g
MO-69523 21.5 140 124
MO-69533 21.5 264 270
MO-69523

mm
Diameter mm
Dimensions g Weight 107
LV Live working tools / Insulated tools
 Insulated tools

Sockets wrenches sets

IEC 60900

MO-69524 MO-69308/23

Sockets 3/8” Sockets 1/2”

  "" ""!  "" " "!
mm mm

g g

MO-69308/23 Complete sockets 1 250 MO-69408/23 Complete sockets 1 500

410 x 120 x 75 410 x 120 x 75
Composition Composition
MO-69308 8 30 MO-69408 8 60
MO-69310 10 35 MO-69410 10 60
MO-69312 12 35 MO-69412 12 70
MO-69313 13 45 MO-69413 13 70
MO-69314 14 45 MO-69414 14 70
MO-69317 17 60 MO-69417 17 80
MO-69319 19 70 MO-69419 19 85
MO-69321 21 85 MO-69421 21 100
MO-69322 22 90 MO-69422 22 100
MO-69323 23 100 MO-69423 23 115
MO-69513 Reversible ratchet 600 MO-69514 Reversible ratchet 600
MO-69523 Extension 130 124 MO-69524 Extension 125 250
Others references 1/2 », consult us.

!!
Plastic case without tools.

Reference g
mm
MO-69503 410 x 120 x 75 250
Other references, consult us.

108
LV Live working tools / Insulated tools
 LV Live working tools

Insulated tools

Rachet spanners
IEC 60900
Reference mm g
mm
MO-69512 1/4” 125 150
MO-69513 3/8” 190 250
MO-69514 1/2” 255 600 MO-69513
MO-69515 3/8” 215 360

MO-69514

With mechanical
locking.

MO-69515

Torque wrench 3/8”

Linear graduation, English and French
square drive scales (ibF Ft and Nm).

Reference g
mm F Nm
MO-69050 330 8 to 50 Nm 790
MO-69050 no reversible
MO-69051 235 4 to 20 Nm 500
MO-69054 290 8 to 50 Nm 850

MO-69051 - MO-69054 reversible

Fully insulated scissors

Reference mm g
MO-72100E 132 80

g Weight mm
Dimensions mm Total length F Nm Clamping torque 109
LV Live working tools / Insulated tools
 Insulated tools

Screwdrivers kit
Reference KIT-03 IEC 60900
Composition
MO-65242 POZIDRIV screwdriver N°1
MO-65244 POZIDRIV screwdriver N°2
MO-65204 Flat blade screwdriver 3.5 x 100 mm
MO-65206 Flat blade screwdrivere 5.5 x 125 mm
MO-65209 Flat blade screwdriver 8 x 175 mm

Pliers kit
Reference KIT-07
Composition
MO-66002 Universal pliers overall length 180 mm
MO-66502 Water pump pliers overall length 250 mm
MO-67302 End stripping pliers 160 mm
MO-66402 Bent snipe nose pliers overall 160 mm
MO-67500 Cable cutter 170 mm

Intervention kit
Reference KIT-04
Composition
MO-65242 POZIDRIV screwdriver N°1
MO-65244 POZIDRIV screwdriver N°2
MO-65204 Flat blade screwdriver 3.5 x 100 mm
MO-65206 Flat blade screwdriver 5.5 x 125 mm
MO-65209 Flat blade screwdriver 8 x 175 mm
MO-67302 End stripping pliers overall 160 mm
MO-66402 Bent snipe nose pliers overall 160 mm
MO-67500 Cable cutter 170 mm

Complete intervention kit

Reference KIT-05
Composition
MO-65242 POZIDRIV screwdriver N°1
MO-65244 POZIDRIV screwdriver N°2
MO-65204 Flat blade screwdriver 3.5 x 100 mm
MO-65206 Flat blade screwdriver 5.5 x 125 mm
MO-65209 Flat blade screwdriver 8 x 175 mm
MO-66002 Universal pliers overall 180 mm
MO-66502 Water pump pliers overall 250 mm
MO-67302 End stripping pliers overall 160 mm
MO-66402 Bent snipe nose pliers overall 160 mm
MO-67500 Cable cutter 170 mm

110
LV Live working tools / Insulated tools
 LV Live working tools

Insulated tools

Electrician tool bag

Reference mm kg
M-87370* 440 x 330 x 160 1.1 Ajustable shouldes
shap.
* Delivered without tools.

Reinforced bottom.

Tool bag
Multipockets
inside.
Reference mm kg
M0-37 400 x 310 x 250 0.6
* Delivered without tools.
High resistance
canvas.
Ajustable
shouldes shap.

Wide adjustable strap.

Back pack for tools Multipockets
inside.
Reference mm kg
M0-38 400 x 300 x 180 0.6
Reinforced zip.
* Delivered without tools.

Reinforced back. High resistance

canvas.

Tool box Retractable handle.

Reference mm kg
M0-39 480 x 320 x 230 0.9
* Delivered without tools.
High resistance
canvas.

Ajustable shouldes
shap.

mm
Dimensions kg Weight 111
LV Live working tools / Insulated tools
 Insulated tools

Flat tool case

Reference mm kg
M-87303 400 x 380 x 60 1

Strong waterproof
canvas.

Multi-pockets inside.

Tool bag
The interior includes: a pocket,
a separation which forms a
Reference mm kg tool tray and a fold-down
MO-34 410 x 280 x 150 3.2 tool tray.

Black grained
leather with
handle.

Separation which forms

Tool bag a tool tray.

Reference mm kg
MO-36 200 x 250 x 450 4.8

Silicon grain leather

totally sewn. Strong
leather handle and
shoulder strap.

Reinforced bottom.

112
LV Live working tools / Insulated tools
 LV Live working tools

Insulated tools

Low voltage complete set.

Complete equipment for live line (LV) interventions.

Reference MO-510-03 *
Personal equipment following… MO-510-03 *
MO-186 1 face shield Insulated tools
CG-98-C 1 working gloves size C MO-69903 1 right angle hexagonal key wrench 3 mm
CG-05-B 1 rubber gloves size B MO-69904 1 right angle hexagonal key wrench 4 mm
CG-36 1 carrying bag for rubber gloves MO-69906 1 right angle hexagonal key wrench 6 mm
MP-42/16 1 insulating mat 3 mm MO-751 1 insulating folding rule
Voltage detector MO-69003 1 adjustable spanner 250 mm
MS-917 1 voltage detector MO-66002 1 universal pliers 180 mm
Insulating MO-66202 1 round nose pliers 160 mm
MP-26-A 10 insulating caps MO-66502 1 water pump pliers 250 mm
MP-35/12 1 insulating blanket MO-67102 1 side cutter 160 mm
MP-4110 10 wood clamps for insulating blanket 1 sockets 3/8" wrench set with 10 sockets:
MO-69308/23
MP-32/15 6 line protectors 1.50 m 8, 10, 12, 13, 14, 17, 19, 21, 22, 23
MP-19 5 insulating adhesive tapes MO-65205 1 flat blade screwdriver 4 x 100
Insulating tools MO-65207 1 flat blade screwdriver 6.5 x 150
MO-61001 1 stripping knife MO-65209 1 flat blade screwdriver 8 x 175
MO-67502 1 cable cutter 230 mm MO-65232 1 Phillips screwdriver n° 1
1 open end spanners set with MO-65234 1 Phillips screwdriver n° 2
MO-68008/19
8 / 10 / 11 / 12 / 13 / 14 / 17 / 19 mm MO-65236 1 Phillips screwdriver n° 3
* Delivered without tool bag. * Delivered without tool bag.

Tool bag to order separately

Reference Characteristics Reference Characteristics
MO-34 Leather tool bag , see page 112 M-87384 Bag for face shield and helmet, see page 20
MP-01 Bag for insulating mats, see page 29 M-87386 Multi-pocket electrician bag, see page 30

mm
Dimensions kg Weight 113
LV Live working tools / Insulated tools
 Insulated tools

Intervention kit for electricians

Reference MO-38510 IEC 60900
Composition
M-87370 1 tool bag
CG-05-C 1 pair of insulating gloves size C
MO-11001 1 safety glasses
AL-230-111 1 safety padlock
MO-65204 Flat blade screwdriver - 3.5 x 100 mm
MO-65206 Flat blade screwdriver - 5.5 x 125 mm
MO-65209 Flat blade screwdriver - 8 x 175 mm
MO-65242 POZIDRIV screwdriver - N°1 4.5 x 80 mm
MO-65244 POZIDRIV screwdriver - N°2 6 x 100 mm
MO-66002 Universal plier - length 180 mm
MO-66402 Bent snipe nose plier - length 160 mm
MO-67302 End stripping plier - length 160 mm
MO-67500 Cable cutter - length 180 mm
MO-66502 Water pump plier - length 250 mm

Our LV Live
working guide
is available.

" !    ! !"   !

" !!" "   !"
" 
!!

www.catuelec.com

114
LV Live working tools / Insulated tools
 LV Live working tools

Jumper clamps, cables and accessories

Mini jumper clamps fully

MC-141
insulated for switchboard use
MC-142
These clamps are specially designed for use on Axial
energized parts in LV installations (switchboards, etc.) (at cable end)
+
to make temporary connections. Isolated bronze jaws
transversal
designed to axially grip conductors can be used
on threaded bolts or shanks and nuts. All other models
in this series tighten with T-handle screw, and receive Adjustable clamp
cable terminals Six-sided round Ø 6-10 mm
17-19 mm. flat 5 mm.

Reference g
mm
MC-141 150 x 75 x 25 200
MC-142 33 x 38 x 58 130 MC-143
MC-143 115 x 70 x 25 150
MC-144 23 x 75 x 150 280 Flat bar,
thickness
MC-145 23 x 70 x 110 220 2-25 mm.
MC-146 23 x 70 x 110 230 MC-144
MC-147 100 x 70 x 25 100 Round 8-12
square 9-10 mm.
MC-147/1 100 x 70 x 25 100 Axial
MC-148 80 x 70 x 25 150
MC-148/1 80 x 65 x 25 100
MC-149 160 x 60 x 55 300

MC-145
Wire clamp for MC-146
stripped cables
Ø 3 to 10 mm. Wire clamp
MC-149 for stripped
cables
Flat bar, Ø 10 to 24 mm.
thickness
20-30.
Transversal
Transversal

MC-147 MC-148/1

MC-148 For 10
to 50 mm2 cable.

Threated rod M8
MC-147. For shunt 200 A.
Threated rod M10
MC-147/1.
Clamp with tapped
revolving rod end M8.
Clamp with tapped revolving rod
end M8, 200 A shunt. To be used
with an insulating six-sided male
hex key 5 mm.

mm
Dimensions g Weight 115
LV Live working tools / Jumper clamps, cables and accessories
 Jumper clamps, cables and accessories

Jumper cables
LV live working tools.
Delivered with socket
Reference g Sections
mm2
screwing ISO M8
MC-153/05 0.5 m 270 35
MC-153/10 1m 570 35 Insulated copper
MC-153/30 3m 1 720 35 cable H 07 RN-F.
MC-153/60 6m 3 460 35 Nominal intensity
200 A.
MC-155/05 0.5 m 380 50
MC-155/10 1m 760 50
MC-155/20 2m 1 520 50
MC-155/30 3m 2 280 50
MC-155/60 6m 4 560 50
MC-155/80 8m 6 080 50 Insulated
cover.

Junction.
Jumper cable with
insulated jumper clamps MC-121

Reference mm g
MC-121 60 x 25 50 MC-122
MC-122 125 x 35 100 piece female-female.
Fuse holder for Shunt.
MC-123 125 x 35 100
MC-124 125 x 35 100
MC-123
piece male-female.

Fuse holder for 30 A for Clamps + banana plug.

MC-124
piece male-female.

Jumper cable with insulated

jumper clamps Cable H 07 RN-F of 25 mm2
Continuous rating: 75 A.
Reference g
MC-120/15 1.5 m 850
MC-120/50 5m 1 950
MC-120/100 10 m 4 000

2 clamps MC-120. Connector for

150 x 100 x 60 mm and 190 g each. cable 8 mm.
Tightening capacity. 12 mm (- flat). Rated insulation:
Spring tightening. 1 500 V.
Icc = 5 kA/1 s.

116
LV Live working tools / Jumper clamps, cables and accessories
 LV Live working tools

Jumper clamps, cables and accessories

Threaded adapter
MC-181
Reference g
mm mm
MC-181 50 x 13 M10 50 Cylindrical body diameter
10 mm to fits on panel
MC-182 50 x 10 M8 27 MC-182 network thread
MC-183 50 x 17 M12 48 of switchboard etc...
Set of 4 adapters by reference.
Total length 50 mm.

MC-183

Shunt Telescopic probe

Connector with
Reference Sections mm2 Current MC-126 insulated probe.
MC-126 1.5 to 16 60 A
MC-126/1 10 to 70 100 A

Retractable cover.
MC-150
Reference mm g
MC-150 173 x Ø 32 185

Bypass housing The six removable

fittings can be
Reference Characteristics separated by the
triangular spanner.
MC-156 Box 40 x 80 x 158 mm
MC-156/1 Spare part
MO-237-D Triangular spanner witch T hande

The housing allows on each side to connect 3 by pass jumpers.

Jumper connecting box with fuse

Reference Intensidad
MC-116 30 to 200 A Shunt for
collective pipes.
The shunt for collective channeling is a box used
to make sure, before proceeding to the replacement
of a molten fuse situated on a channeling, that the
defect which brought about the molten is
eliminated. This box is used with a fuse when the
(nominal) assigned intensity of the channeling
is < 100 A and with 2 fuses when this intensity
is included between 100 A and 200 A. It can also
be used to open a circuit in load, for example
to change a damaged accessory such as a pin.

Total length mm
Dimensions mm
Diameter g Weight 117
LV Live working tools / Jumper clamps, cables and accessories
 Cover-up equipment

Insulator cover ST TST BT N°435

For LV insulator.
Synthetic orange
colour rubber.

Reference Characteristics g
mm mm

MP-22 Line 150 110 475

insulator Height

MP-23 Dead end 210 180 1 145

insulator Height

Steel
suspension
Bag for insulator cover hook.
Strong
Reference mm
g waterproof.
MP-50 Ø 300 x H 400 mm 650
Reinforced botton
and rope handle.

End cap for

conductor cable Cylindrical cap made of ST TST BT N°430
flexible insulating material.

Reference mm
Out
mm
In Section mm2
MP-26-A 10 6.5 6 cm 4 to 10 mm2
MP-26-B 15 11 10 cm 10 to 35 mm2
MP-26-C 20 15 12 cm 16 to 70 mm2
MP-26-D 25 20 12 cm 25 to 120 mm2
MP-26-E 35 30 12 cm to 300 mm2 With cross-shaped opening.

Flexible - type conductor cover ST TST BT N°440

For LV conductors. Shape type Ω,
thickness 3.3 mm.
For conductor
Reference g Ø 16 mm max.
MP-32/10 1m 410
MP-32/15 1.5 m 620
MP-33 3m 1 230

Flexible - type conductor cover ST TST BT N°445

For overhead network (< 1000 V). For conductor Ø 20-22 mm.

Reference Characteristics g
MP-31 Sipral shape type 5 m 600
MP-59 Indent tool for MP-31 180

118
LV Live working tools / Cover-up equipment
 LV Live working tools

Insulating flexible blanket

Electrical Insulating blanket Electrical Insulating blanket
The electrical insulating blanket is used for the protection of In accordance with IEC 61112 standard and according class 0
workers from accidental contact with live or earthed electrical specifications. Operating voltage: 1000 V AC and 1500 V DC.
conductors, apparatus or circuits and avoidance of short circuits
on electrical installations. In accordance with specific properties:
Category A: acid resistant.
Category C: resistant to very low temperature (-40°C).
Category H: oil resistant.

Recommendations for use

Storage/Transport
Insulated blanket should be properly stored to avoid the risk
of damage to the insulating material.
Do not store or use close to excessive heat.
Do not expose to direct sunlight for long period.
Storage temperature: 10°C to 21°C.

Before use
Insulating blanket cut from a roll should keep visible markings.
Each side of the blanket should be. Visually inspected by the user.
The unsulating blanket must not have tears or holes. If the blanket
is durty, wash it with soap and water. Dry it with respect of using
temperatures.

ACCESSORIES SEE PAGE 121 In use

Operating temperatures: -40°C to +55°C.
Clamp and adhesive tape. Avoid contact with chemical products. Do not walk on
the insulating blanket.
MP-19-LOT

Periodic inspection
Insulating blanket should not be used without having been
electrically tested within twelve month preceding with the excep-
tion of class 00 and 0.
MP-41530 Only visual inspection is required for class 00 and 0.

mm
Dimensions mm
Diameter g Weight 119
LV Live working tools / Insulating flexible blanket
 Cover-up equipment

Insulating flexible blanket

Polyvinyl in roll. IEC 61112
Class 0
MP-35 1 000 V
1 500 V
MP-37
Flexible translucent
polyvinyl.

Operating voltage é kg
Reference Class m mm
MP-35 0 ≤ 1 000 V ≤ 1 500 V 1.3 x 25 0.3 12
MP-35/12 0 ≤ 1 000 V ≤ 1 500 V 1.3 x 12.5 0.3 6
MP-37 0 ≤ 1 000 V - 0.09 x 25 0.3 0.8

Insulating flexible blanket

orange rubber

Operating voltage é kg
Reference Class m mm
MP-220 0 ≤ 1 000 V ≤ 1 500 V 1x1 1 1.5
MP-220/1 0 ≤ 1 000 V ≤ 1 500 V 1 x 10 1 15

Insulating flexible blanket

reinforced polyvinyl
Individual model.

Operating voltage é g
Translucid polyvinyl.
Reference Class mm mm Reinforced by a grid
≤ 1 000 V ≤ 1 500 V of synthetic fibre. The «VelcroTM» type allows
MP-123 0 360 x 660 0.5 150
the flexible blanket to be
MP-123/1 0 ≤ 1 000 V ≤ 1 500 V 500 x 900 0.5 290 closed by pressing the
MP-123/2 0 ≤ 1 000 V ≤ 1 500 V 800 x 1 200 0.5 600 edges together. Several
flexible blanket can also be
connected in this manner.

120
LV Live working tools / Cover-up equipment
 LV Live working tools

Cover-up equipment

Insulating flexible blanket

LV/MV
Flexible translucent
é kg vinyl materiel.
Reference Characteristics m mm
MP-40 In roll 1.3 x 25 0.8 24

In accordance with ST HTA 50D EDF-SERECT specification.

Blanket clamp ST TST BT N°415

Insulating plastic clamp
Reference mm g with spring.

MP-4110 160 60 1 Bimaterial

MP-41530 65 10 12 insulating clamp.

MP-4110
MP-41530

Electrical adhesive tape IEC EN 60454

Reference m

MP-19-LOT 0.015 x 10 Set of ten rolls

* Brown, yellow, red, orange, blue, white, black, green, green/yellow, grey.

Large electrical adhesive tape IEC EN 60454

Rubber and PE compound

Dielectric resistance : 2.5 kV.

Reference m
MP-19/1 0.05 x 50 Red

Obstacle or distance protection,

see chapter locking and signaling.

Dimensions é Thickness g Weight

mm
121
Total length Packaging
LV Live working tools / Cover-up equipment
 Cable identifier

Cable Identifier
The MX-400 includes a modulator A and a The modulator is an
receiver B. electronic power system
The MX-400 is a cable identifier that is particularly that draws current pulses
in 10-millisecond intervals
well suited for quickly identifying underground
at a frequency of 1 Hertz.
cables and insulating overhead lines. It is also Current limited by fuse,
designed for identifying phases. This identifier HPC 100 kA aM 10 A.
is used on any type of power distribution network
with rated voltages of 230 to 400 Volts.

Operating voltage: 230/400 V +/– 10%.

Frequency: 50 Hz +/– 10%.
Operating temperature: – 10° to + 55°C.
Storage temperature: – 20° to + 70 .
Class II modulator.

Reference mm kg
MX-400 510 x 465 x 216 10.6
Comes complete with an ABS case, 2 cables, and 1
amperemetric clamp.

H07RNF power cables.

(6 mm2 and 3 m length).
The connection is made between
phases for identifying the cable
or between phase and neutral The receiver is equipped with
for identifying a phase. After two sensors that detect the
connection, the device is passage of pulses drawn by
immediately live, as indicated the modulator. Once these pulses
by two 230 and 400 Volts lights. are received, the device emits
a light signal, confirmed with
a beep after three seconds.
Receiver powered by 9 V
lithium type 6LR61 battery.
Sensor sensitivity adjustable
to 15 levels.
Detection can easily be adjusted,
which accordingly affects
identification accuracy.

The phase is identified with

an amperemetric clamp
connected to the receiver and
positioned around the phase
to be identified.
Accessories When the clamp detects
pulses drawn by the modulator,
Reference Characteristics the receiver emits a light signal,
confirmed by a beep after
MX-400/1 Modulator + receiver three seconds.
MX-400/6 Receiver
MX-400/7 Amperemetric clamp
MC-1421 Connection clamp

Dimensions kg Weight
122
LV Live working tools / Cable identifier