X XModulating actuatorstestregistrierung

Actuators for shut-off dam­

pers
Modulating actuators

For moving the damper blades of shut-off dampers to ​

any position
Modulating actuators for Type AK or AKK shut-off dampers
■■ Various damper blade positions
■■ Supply voltage 24 V AC/DC
■■ Control input signal: Voltage signal 2 – 10 V
■■ Mechanical stops
■■ Retrofit possible

03/2017 – DE/en PD – MOD – 1

Actuators for shut-off dampers
General information Modulating actuators

Type Page
Modulating actuators General information MOD – 2
Function MOD – 3
Technical data MOD – 4
Variants MOD – 5
Electrical connection MOD – 6

Application Application – For moving the damper blades of Type AK and ​

– Actuators for variable adjustment AKK shut-off dampers to any position

Description Parts and characteristics – Setpoint value signal 2 – 10 V DC

– Mechanical stops for limiting the damper blade ​ – Release button to allow for manual operation
positions
– Supply voltage 24 V AC/DC
– Overload protection

PD – MOD – 2 03/2017 – DE/en

Actuators for shut-off dampers
Function Modulating actuators

Functional description CLOSED positions.

The actuator moves the blade of a shut-off ​ The control input signal is a voltage signal.
damper to any position between the OPEN and ​

Variable control initiated by a voltage signal

Setpoint adjuster
24 V
⊥ ~

1 2 3

U Voltage signal 0 – 10 V DC or 2 – 10 V DC

1-wire control for modulating actuators 2-wire control (3-point) for modulating ​
actuators

S1 S2 S1

1 2 3 5 1 2 3 5
⊥ ~ Y U ⊥ ~ Y U
− + − +

Switch functions Switch functions

S1 open: Direction of rotation 1 S1 open
S1 closed: Direction of rotation 2 S2 open: Actuator has stopped (any position)
S2 closed: Direction of rotation 1

S1 closed
S2 open: Actuator has stopped (any position)
S2 closed: Direction of rotation 2

Control options and effect of actuator action in case of factory setting

Direction of rotation
Order code detail Function Control
1 2
B20 Variable Variable control
1-wire control, 2-wire​
B20 Open/close OPEN CLOSED
control

03/2017 – DE/en PD – MOD – 3

Actuators for shut-off dampers
Technical data Modulating actuators

Actuators LM24A-SR and LM24A-SR-F

Supply voltage (AC) 24 V AC ± 20 %, 50/60 Hz
Supply voltage (DC) 24 V DC ± 20 %
Power consumption – load 1W
Power consumption – idle 0.4 W
Power rating 2 VA
Torque 5 Nm
Running time for 90° 150 s
Position feedback 2 – 10 V DC, 1 mA
Control signal 2 – 10 V DC, Ra > 100 kΩ
Connecting cable 4 × 0.75 mm², 1 m long
IEC protection class III (protective extra-low voltage)
Protection level IP 54
EC conformity EMC to 2014/30/EU, RoHS to 2011/65/EU
Operating temperature –30 to 50 °C
Weight 0.5 kg

PD – MOD – 4 03/2017 – DE/en

Actuators for shut-off dampers
Variants Modulating actuators

Actuator LM24A-SR

Any attachments are to be defined with the order ​

code of the shut-off damper.

B20 – Control input signal: Setpoint value signal ​

2 – 10 V DC, corresponds to the total rotation ​
Application range (90°), working range is limited by ​
– Actuator LM24A-SR mechanical stops
– Stepless adjustment as well as opening and ​ – Output: Position feedback 2 – 10 V
closing of shut-off dampers – Mechanical stops
– Direction of action can be reversed
Parts and characteristics
– Release button to allow for manual operation
– Supply voltage 24 V AC/DC

Actuators for the variable adjustment of shut-off dampers

Actuator
Order code detail Supply voltage
Part number Type
B20 M466DT6 with M536AJ4 LM24A-SR 24 V

03/2017 – DE/en PD – MOD – 5

Actuators for shut-off dampers
Electrical connection Modulating actuators

LM24A-SR, connecting cable core ​

identification

BK RD WH OG

1 2 3 5
⊥ ~ Y U
− +

LM24A-SR

1 ⊥, –: Ground, neutral
2 ~, +: Supply voltage
3 Y: Setpoint value signal
5 U: Position feedback

LM24A-SR and LM24A-SR-F

PD – MOD – 6 03/2017 – DE/en