2002 Product Catalog 900 - 1800

Allgon Antenna Systems
NMT 900, ETACS 900, GSM 900, DCS 1800, UMTS 2100
www.allgon.com
S T
Whats Inside
A B
Allgon 2100 MHz Dual Polarized Antennas,

including 1800-2100 MHz Dualband UMTS Antennas and Filters (UX, UXC)
Overview Page 5 Quick Reference Guide Page 6 65 Degree Beamwidth, Singleband Page 7 65 Degree Beamwidth, Dualband Page 8 1800 / 2100 MHz Dualband Filter Page 10 1800 MHz Rejection Filter Page 11 900 / 1800 / 2100 MHz Triple band Filter Page 12
L E O
Allgon Broadband Antennas (UXM)

Overview Page 13 Quick Reference Guide Page 14 65 Degree Beamwidth Page 15 90 Degree Beamwidth Page 17
Allgon 1800 MHz Dual Polarized Antennas (XM)

Overview Page 19 Quick Reference Guide Page 20 65 Degree Beamwidth Page 21
C O N
Allgon 900 MHz Dual Polarized Antennas (XU)

Overview Page 23 Quick Reference Guide Page 24 65 Degree Beamwidth Page 25
T E
Allgon 900 MHz Urban Panel Antennas (U)

Overview Page 27 Quick Reference Guide Page 28 65 Degree Beamwidth Page 29 90 Degree Beamwidth Page 31
N T
Allgon Omnidirectional Antennas (O)

Overview Page 32 Quick Reference Guide Page 33 900 MHz Omni Page 34 900 MHz Electrical Downtilt Inverted Mount Page 34
Allgon Indoor Antennas (CO, ALIC)

Overview Page 35 Quick Reference Guide Page 36 Multi-Band Indoor Omni Page 37
Allgon 2G Dualband Solution (ALVC, DXC)

Overview Page 39 Quick Reference Guide Page 40 65 Degree Beamwidth Page 41 900 / 1800 MHz Dual Band Filter Page 44 Antenna Beamtilt Page 45 Testing Procedures Page 47 Mounting Brackets Page 48
We also have a wide range of 800 and 1900 MHz antennas. For more information, see our website at www.allgon.com.
Digital pattern information for 900 and 1800 MHz antennas can be obtained from www.us.allgon.com.
Ta b l e o f C o n t e n t s P a g e 3
A l l g o n
U M T S
S i t e
S o l u t i o n s
Optimized Radio Performance

- Dualband GSM 900/1800 Filter - Dual pol, dualband antenna - Separate UMTS antennas with MET - Rejection Filter
Co-siting Benefits
- Dual pol, dualband GSM 1800/UMTS antenna - Rejection filter
Feeder Savings
- Tripleband filter - Separate antennas for optimized radio performance - Rejection Filter
Base Station Antennas Page 4
2 1 0 0
M H z
D u a l
P o l a r i z e d
A n t e n n a 2100 MHz Dual Polarized Antenna
Features
Optimum system performance Top value at lowest total cost over time Evolved from well-proven leading-edge technology Discreet, slim, aesthetically pleasing design Optional Manual adjustable Electrical Tilt (MET) for tuning flexibility Can be upgraded to remote controlled RET functionality starting in 2002
Performance
The Allgon UMTS panel antennas have verified vertical pattern performance on 100% of the antennas. Given the narrow mechanical width and depth of the product, the offerings are unmatched in Front-to-Back Ratio for all opening angles. The UMTS panel antenna has consistent reliable performance from frequency to frequency and product to product.
Design Philosophy
The Allgon singleband, dual polarized UMTS antenna with its ultra-slim design and sophisticated electrical performance ensures maximum efficiency, as well as a stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. The slant + 45 dual polarization system provides the independent fading signals needed for achieving top-quality coverage via diversity concepts. The optional Manual adjustable Electrical Tilt (MET) module is based on a patented sliding dielectric that minimizes intermodulation distortion and maximizes efficiency. The MET allows you to fieldadjust the electrical tilt from 0 - VBW for optimum roll-off effect.
Brackets
Allgon antenna mounts have been carefully designed and tested to ensure a fast and problem-free installation. The mounts are pre-mounted or co-packed with the antenna and ready for mounting directly to a pole, outside diameter 1.0 - 5.0 (25-125 mm). They can be mounted vertically or tilted, see tilt range specified in each antenna specification. For more information, please see pages 48 - 50.
Testing
Allgon prides itself on stringent testing requirements with conservative, yet realistic claims of the performance of our product offering. For more information on testing procedures, see page 47. Our front-toback ratios are specified for +/- 20 from 180 (worst case) to 0.
Quality Materials
Proper use of materials and their structure ensures performance integrity. In antennas the electrical performance is directly related to mechanical performance. The choice of radome material is crucial since it acts as a window between the radiating elements and the coverage area. Our UV stabilized PVC radome is resistant to moisture absorption. Furthermore, our radomes can withstand mechanical stresses, even at low temperatures and long exposure to UV radiation. For corrosion inhibition, we use aircraft quality aluminum alloy that is inherently resistant to corrosion caused by the environment.
Connectors
7/16 DIN Connector
2100 MHz Dual Polarized Antenna
65 Degree 2100 MHz Dual Polarized Panel Antenna Gain Part Number
15.5 dBi 7500.00 7500.02 7500.06 7501.00 7501.02 7501.06
65 Degree Dualband GSM 1800/2100 Antenna with MET Page

7 7 7 7 7 7
Description
UX-2100-65-15.5i-0-D UX-2100-65-15.5i-2-D UX-2100-65-15.5i-6-D UX-2100-65-18i-0-D UX-2100-65-18i-2-D UX-2100-65-18i-6-D
Gain Part Number

17.5 / 18 dBi 7540.00
Description
UXC-1800/2100-65-17.5/18i-A/A-D
Page
9
18 dBi
UMTS Filters Part Number

9281.01 9283.01 9282.01
65 Degree 2100 MHz Dual Polarized Antenna with Manual adjustable Electrical Tilt (MET) Gain Part Number
15.5 dBi 15.5 dBi 7521.00 7520.00
Description
Dualband Filter Rejection Filter Triple band Filter
Page
10 11 12
Description
UX-2100-65-15.5i-A-D UX-2100-65-18i-A-D
Page
8 8
Please contact Allgon for the latest updates regarding product availability.
2100 MHz Dual Polarized Antenna Description Detail:
U X - 2 1 0 0 - 6 5 - 1 8 i - 0 / A - D
7/16 DIN Connector Electrical Downtilt Angle or A for MET
UMTS Dual Polarized Family
Frequency Band
Horizontal Beamwidth
Gain in dBi
Antennas may be ordered using part number or description.
2 1 0 0
M H z
D u a l
P o l a r i z e d
A n t e n n a
Electrical Specifications
(UX-2100-65-15.5i)
7500
(UX-2100-65-18i)
7501
Frequency Range (MHz) 1900 - 2170 Gain 15.5 dBi (13.5 dBd) linear, dual slant 45 Polarization <1.4:1 VSWR, 50 (1920-1980; 2110-2170 MHz) <1.5:1 VSWR, 50 (1900-1920; 2010-2025 MHz) 65 Horizontal 3dB beamwidth 13 Vertical 3dB beamwidth 0, 2 & 6 Custom electrical downtilts >30 dB Co-pol 40 degree cone Front-to-back-ratio 40 degree cone Front-to-back ratio, total power >25 dB Suppression of first upper side lobe (0 ET) >20 dB First lower null fill >-22 dB Maximum CW input power 800W IM, any order in UL-band <-117 dBm for 2x20W
1900 - 2170 18 dBi (16 dBd) linear, dual slant 45 <1.4:1 <1.5:1 65 6.5 0, 2 & 6 >30 dB >25 dB >22 dB >-20 dB 800W <-117 dBm for 2x20W
Mechanical Specifications
Connector Height Width Depth Antenna Weight Weight including tilt brackets Survival wind speed Maximum wind area Frontal wind load @150 km/h 7/16 DIN bottom 697 mm (27.4) 167 mm (6.6) 58 mm (2.3) 2.5 kg 6.1 kg 70 m/s (156 mph) 0.12 sq.m 119 N 7/16 DIN bottom 1297 mm (51) 167 mm (6.6) 58 mm (2.3) 4.1 kg 7.7 kg 70 m/s (156 mph) 0.22 sq.m 221 N
UX-2100-65-15.5i UX-2100-65-18i
All metallic components DC grounded for Lightning Protection Pole mount and downtilt bracket to be pre-mounted and/or co-packed -1.5 to +35 Tilt Range
Comments Gain is typical within frequency band. Front-to-back ratio is defined within 20 from the backwards direction in any plane. Sidelobe suppression and null fill is relative to peak of main beam. Frontal windload is calculated assuming the shape factor C=1 Radome color is NCS 2502-B (RAL 7035)(gray).
0 -5 -10 -15 -20 -25 -30 -35 -40
-1 to +17
For a complete list of released models pertaining to gain, electrical downtilt and connector placement, please see the quick reference guide on page 6.
0 -5 -10 -15 -20 -25 -30 -35 -40
Typical Horizontal and Vertical 7500.02 Patterns
2 1 0 0
M H z
D u a l
P o l a r i z e d
A n t e n n a
(UX-2100-65-15.5i-A)
7521
(UX-2100-65-18i-A)
7520
Frequency Range (MHz) 1900 - 2170 Gain 15.5 dBi (13.5 dBd) linear, dual slant 45 Polarization <1.4:1 VSWR, 50 (1920-1980; 2110-2170 MHz) <1.5:1 VSWR, 50 (1900-1920; 2010-2025 MHz) 65 Horizontal 3dB beamwidth 13 Vertical 3dB beamwidth 0 - 16, in 1 increments MET (AEDT) >30 dB Co-pol 40 degree cone Front-to-back-ratio 40 degree cone Front-to-back ratio, total power >25 dB Suppression of first upper side lobe (0 ET) >21 dB First lower null fill >-24 dB Maximum CW input power 800W IM, any order in UL-band <-117 dBm for 2x20W
1900 - 2170 18 dBi (16 dBd) linear, dual slant 45 <1.4:1 <1.5:1 65 6.5 0 - 8, in 1 increments >30 dB >25 dB >21 dB >-24 dB 800W <-117 dBm for 2x20W
UX-2100-65-15.5i-A
Connector Height Width Depth Antenna Weight Weight including tilt brackets Survival wind speed Maximum wind area Frontal wind load @150 km/h 7/16 DIN bottom 697 mm (27.4) 167 mm (6.6) 58 mm (2.3) 3.5 kg 7.1 kg 70 m/s (156 mph) 0.12 sq.m 119 N 7/16 DIN bottom 1297 mm (51) 167 mm (6.6) 58 mm (2.3) 5 kg 8.6 kg 70 m/s (156 mph) 0.22 sq.m 221 N
UX-2100-65-18i-A
All metallic components DC grounded for Lightning Protection Pole mount and downtilt bracket to be pre-mounted and/or co-packed -1.5 to +35 Tilt Range
-1 to +17
0 -5 -10 -15 -20 -25 -30 -35 -40
0 -5 -10 -15 -20 -25 -30 -35 -40
2 1 0 0
M H z
D u a l
P o l a r i z e d
A n t e n n a
(UXC-1800/2100-65-17.5/18i-A/A-D)
7540
Frequency range 1710 - 1880 / 1900 - 2170 Gain 17.5/18 dBi (15.5/16 dBd) linear, dual slant 45 Polarization <1.4:1 (1805-1880 and 2110-2170 MHz) VSWR, 50 <1.5:1 (1710-1785 and 1900-1980 MHz) VSWR, 50 65 Horizontal 3dB beamwidth 7 / 6.5 Vertical 3dB beamwidth 0 - 8, in 1 increments MET (AEDT) >29 / >30 dB Co-pol 40 degree cone Front-to-back-ratio 40 degree cone Front-to-back ratio, total power >23 / >25 dB Suppression of first upper side lobe (0 ET) >15 / >17 dB First lower null fill N/A Maximum CW input power 800W Two tone intermodulation 3rd order (1800 MHz) <-110 dBm for 2x10W IM, any order UL-band (2100 MHz) <-117 dBm for 2x20W
UXC-1800/2100-65-17.5/18i-A
Connector Height Width Depth Antenna Weight Weight including tilt brackets Survival wind speed Maximum wind area Frontal wind load @150 km/h 7/16 DIN bottom 1296 mm (51) 326 mm (6.6) 80 mm (2.3) 10 kg 13.6 kg 70 m/s (156 mph) 0.22 sq.m 425 N
All metallic components DC grounded for Lightning Protection Pole mount and downtilt bracket to be pre-mounted and/or co-packed -1 to +17 Tilt Range
Comments Gain is typical within frequency band. Front-to-back ratio is defined within 20 from the backwards direction in any plane. Sidelobe suppression and null fill is relative to peak of main beam. Frontal windload is calculated assuming the shape factor C=1 Radome color is NCS 2502-B (RAL 7035)(gray). *Values are representative for 0 EDT, variants may differ slightly
0 -5 -10 -15 -20 -25 -30 -35 -40
U M T S UMTS Dualband Filter
D u a l b a n d
F i l t e r
RF Specifications
Frequency range
(Dualband filter GSM 1800/UMTS)
9281.01
1710-1880 MHz GSM 1800 band 1920-2170 MHz UMTS band >20 dB GSM 1800 port Return loss >20 dB UMTS port >20 dB Common port Maximum input power GSM 1800 port 6x+43 dBm 2x+43 dBm UMTS port Insertion loss <0.5 dB 1710 - 1870 MHz <0.85 dB 1870 - 1880 MHz <0.7 dB 1920 - 1930 MHz <0.5 dB 1920 - 2170 MHz Isolation between ports GSM 1800 port to UMTS port 1920-2170 MHz >70 dB UMTS port to GSM 1800 port 1710-1880 MHz >50 dB
Dualband Filter GSM 1800/UMTS
Connector (all ports) 1) Height Width 2) Depth Weight

Comments 1) The common connector is placed on the opposite side of the BTS ports (inline). 2) Not including the connectors.
7/16 female 60 mm (2.4 ) 190 mm (7.5 ) 110 mm (4.3) <2.0 kg
Dualband Filter GSM 1800 / UMTS
Return Loss dB 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 1700 MHz 1950 MHz
Insertion Loss dB 0 -0.5 Insertion Loss -1 -1.5 -2 -2.5 -3 -3.5 -4 -4.5 -5 2200 MHz
Return Loss Common Port
Return Loss dB -10 -15 -20 -25 -30 -35 -40 -45 -50 -55 -60 1700 MHz
Insertion Loss dB 80 60 40 20 0 -20 -40 -50 -80 -100 Isolation between ports -120 2200 MHz
Return Loss 1800 port Return Loss UMTS port
1950 MHz
U M T S
R e j e c t i o n
F i l t e r UMTS Rejection Filter
RF Specifications
Frequency range Return loss Maximum input power Insertion loss Out of band rejection BTS port ANT port 1710 - 1870 MHz 1870 - 1880 MHz 1920 - 1980 MHz 2110 - 2170 MHz
(GSM 1800 MHz rejection filter for UMTS)
9283.01
1710-1880 MHz >20 dB >20 dB 6x+43 dBm <0.5 dB <0.7 dB >70 dB >70 dB
Connector 1) Height Width 2) Depth Weight
Comments 1) The connectors are mounted on opposite sides of the filter. 2) Not including the connectors.
1800 MHz Rejection Filter
BTS port ANT port
7/16 male 7/16 female 60 mm (2.4) 65 mm (2.6) 160 mm (6.3) <2.0 kg
GSM 1800 MHz rejection filter for UMTS

Return Loss dB 5 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 1.680 GHz 1.840 GHz Insertion Loss dB 10 0 -10 -20 -30 -40 -25 -60 -70 -80 -90 2.000 GHz Insertion Loss Return Loss
U M T S UMTS Triple band Filter

Preliminary RF Specifications
Frequency range
T r i p l e
b a n d
F i l t e r
Available in volume Q3 2002

(Triple band filter GSM 900/1800/UMTS)
9282.01
Triple band Filter GSM 900/GSM 1800/ UMTS
880-960 MHz GSM 900 band 1710-1880 MHz GSM 1800 band 1920-2170 MHz UMTS band Return loss >18 dB GSM 900 port >18 dB GSM 1800 port >18 dB UMTS port >18 dB Common port Maximum input power GSM 900 port 6x+43 dBm 6x+43 dBm GSM 1800 port 2x+46 dBm UMTS port Insertion loss <0.5 dB 880-960 MHz <0.5 dB 1710-1870 MHz; 1870-1880 MHz <0.5 dB 1920-1930 MHz; 1930-2170 MHz Isolation between ports GSM 900 port to GSM 1800 and UMTS bands >40 dB >60 dB GSM 1800 port to GSM 900 >40 dB (for triple band) and UMTS bands >60 dB UMTS port to GSM 900 >40 dB (for triple band and GSM 1800 bands) >40 dB UMTS port to GSM 1800
Connector (all ports) 1) Height Width 2) Depth Weight
Comments 1) The common connector is placed on the opposite side of the BTS ports (inline). 2) Not including the connectors. 3) Patent pending
7/16 male 80 mm (3.1) 200 mm (7.9) 110 mm (4.3) <2.0 kg
1 7 1 0
2 1 7 0
M H z
B r o a d
B a n d
A n t e n n a 1710 - 2170 MHz Broad Band Antenna
Available in volume in Q3 2002.
Features
Covers Several different frequency bands Superior radiation pattern High cross polar discrimination factor Excellent front-to-back ratio AEDT functionality for tuning flexibility Field adjustable Manual adjustable Electrical Tilt (MET) in one degree increments Prepared for remote-controlled MET functionality
Performance
The Allgon Dual Polarized antenna has been designed and tested to ensure maximum performance and reduced polarization errors. Isolation is another important aspect of dual polarized antennas. A well designed antenna should have at least 30 dB - it is a sign of quality and shows how much effort has been put into the design stage.
Design Philosophy
The Allgon Broad Band antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design which provides a very small variation of the -3 dB horizontal beam width over the frequency band as well as a high front-toback ratio. Allgon Broad Band antennas come with MET for tuning flexibility of tilt angles. For MET information, see page 45. This design ensures the highest possible cross-polar discrimination value.
Brackets
Allgon antenna mounts have been carefully designed and tested to ensure a fast and problemfree installation. The mounts are pre-mounted or co-packed with the antenna and ready for mounting directly to a pole, outside diameter 1.0 5.0 (25-125 mm). They can be mounted vertically or tilted, see tilt range specified in each antenna specification. For more information, please see pages 48 - 50.
Testing
Allgon prides itself on stringent testing requirements with conservative, yet realistic claims of the performance of our product offering. For more information on testing procedures, see page 47. Our front-to-back ratios are specified for +20 from 180 (worst case) to 0 in a total power configuration.
Quality Materials
Proper use of materials and their structure ensure performance integrity. In antennas, the electrical performance is directly related to mechanical structure. The choice of radome material is crucial since it acts as a window between the radiating elements and the coverage area. Our UV stabilized PVC and extruded fiberglass radomes have extremely low moisture absorption. Further, our radomes withstand mechanical stresses, even at low temperatures and long exposure to UV radiation. For corrosion inhibition, we use aircraft quality aluminum alloy that is inherently resistant to corrosion caused by the environment.
Connectors
Upper & Lower Placement 7/16 DIN Connector
Q 1710 - 2170 MHz Broad Band Antennas
65 Degree 1710 - 2170 MHz Dual Polarized Gain Part Number

15 dBi 7700.00 7700.06 7701.00 7701.06 7721.00 7722.00
Description
UXM-1710-2170-65-15i-0-D UXM-1710-2170-65-15i-6-D UXM-1710-2170-65-18i-0-D UXM-1710-2170-65-18i-6-D UXM-1710-2170-65-18i-A-D UXM-1710-2170-65-19i-A-D
Page
15 15 15 15 16 16
18 dBi 19 dBi
90 Degree 1850 - 2170 MHz Dual Polarized Gain Part Number

13.5 dBi 16.5 dBi 18 dBi 7735.00 7740.00 7745.00
Description
Page
UXM-1850-2170-90-13.5i-A-D 17 UXM-1850-2170-90-16.5i-A-D 17 UXM-1850-2170-90-18i-A-D 18
Available in volume in Q3 2002.

1710 - 2170 MHz Broad Band Antenna
Description Detail:
U X M - 1710-2100- 6 5 - 1 8 i - A - D
7/16 DIN Connector
Broad Band Family
Frequency Band
Gain in dBi
Adjustable Downtilt Angle
1 7 1 0
2 1 7 0
M H z
B r o a d
B a n d
A n t e n n a
Preliminary Electrical Specifications

(UXM-1710-2170-65-15i)
7700
(UXM-1710-2170-65-18i)
7701
Frequency range (MHz) 1710 - 2170 Gain 15 dBi (13 dBd) Polarization dual linear, +/- 45 VSWR, 50 <1.5:1 Horizontal 3dB beamwidth 65 Vertical 3dB beamwidth 13.5 Custom electrical downtilt 0 & 6 Co-pol 40 degree cone Front-to-back-ratio >30 dB 40 degree cone Front-to-back ratio, total power >25 dB Suppression of first upper side lobe (0 ET) >18 dB First lower null fill <-20 dB typical Power handling, average per input 250 W Power handling, average total 500 W Two tone intermodulation 3rd order (1800, 1900 MHz)<-110 dBm for 2x10W Two tone intermodulation 7th order (2100 MHz) <-117 dBm for 2x20W Isolation between ports >30 dB
1710 - 2170 18 dBi (16 dBd) dual linear, +/- 45 <1.5:1 65 6.7 0 & 6 > 30 dB > 25 dB > 19 dB <-20 dB typical 250 W 500 W <-110 dBm for 2x10W <-117 dBm for 2x20W >30 dB
UXM-1710-217065-15i
Preliminary Mechanical Specifications

Connector Height Width Depth Survival wind speed 7/16 DIN bottom mounted 27.4" (697 mm) 6.6" (167 mm) 3.5" (89.5 mm) 156 mph (70 m/s) 7/16 DIN bottom mounted 51" (1297 mm) 6.6" (167 mm) 3.5" (89.5 mm) 156 mph (70 m/s)
UXM-1710-217065-18i
*All feed network components DC grounded for Lightning Protection Pole mount and downtilt bracket are pre-mounted. Tilt range -1.5 to +35
Comments Gain is typical within frequency band. Radome color is NCS 2502-B (RAL 7035)(gray).
-1 to +17
For a complete list of released models pertaining to gain and electrical downtilt, please see the quick reference guide on page 14.
0 -5 -10 -15 -20 -25 -30 -35 -40
0 -5 -10 -15 -20 -25 -30 -35 -40
1710 - 2170 Broad Band Antenna
1 7 1 0
2 1 7 0
M H z
B r o a d
B a n d
A n t e n n a

(UXM-1710-2170-65-18i-A)
7721
(UXM-1710-2170-65-19i-A)
7722
UXM-1710-217065-18i-A
Frequency range (MHz) 1710 - 2170 Gain 18 dBi (16 dBd) Polarization dual linear, +/- 45 VSWR, 50 <1.5:1 Horizontal 3dB beamwidth 65 Vertical 3dB beamwidth 6.8 MET (AEDT) 0 - 8 Co-pol 40 degree cone Front-to-back-ratio >30 dB 40 degree cone Front-to-back ratio, total power >25 dB Suppression of first upper side lobe (0 ET) >18 dB First lower null fill <-20 dB typical Power handling, average per input 250 W Power handling, average total 500 W Two tone intermodulation 3rd order (1800, 1900 MHz)<-110 dBm for 2x10W Two tone intermodulation 7th order (2100 MHz) <-117 dBm for 2x20W Isolation between ports >30 dB
1710 - 2170 19 dBi (17 dBd) dual linear, +/- 45 <1.5:1 65 4.6 0 - 5 > 30 dB > 25 dB > 18 dB <-20 dB typical 250 W 500 W <-110 dBm for 2x10W <-117 dBm for 2x12W >30 dB

Connector Height Width Depth Survival wind speed 7/16 DIN bottom mounted 51" (1297 mm) 6.6" (167 mm) 3.5" (89.5 mm) 156 mph (70 m/s) 7/16 DIN bottom mounted 78.7" (~2000 mm) 6.6" (167 mm) 3.5" (89.5 mm) 156 mph (70 m/s)
UXM-1710-217065-17i-A
*All feed network components DC grounded for Lightning Protection Pole mount and downtilt bracket are pre-mounted. Tilt range -1 to +17
-0.4 to +10.6
0 -5 -10 -15 -20 -25 -30 -35 -40
0 -5 -10 -15 -20 -25 -30 -35 -40
1 8 5 0
2 1 7 0
M H z
B r o a d
B a n d
A n t e n n a

(UXM-1850-2170-90-13.5i-A)
7735
(UXM-1850-2170-90-16.5i-A)
7740
Frequency range (MHz) 1850 - 2170 Gain 13.5 dBi (15.5 dBd) Polarization dual linear, +/- 45 VSWR, 50 <1.5:1 Horizontal 3dB beamwidth 90 Vertical 3dB beamwidth 13.5 MET (AEDT) 0 - 16 Co-pol 40 degree cone Front-to-back ratio >30 dB 40 degree cone Front-to-back ratio, total power >25 dB Suppression of first upper side lobe (0 ET) >18 dB First lower null fill <-20 dB typical Power handling, average per input 250 W Power handling, average total 500 W Two tone intermodulation 3rd order (1800, 1900 MHz)<-110 dBm for 2x10W Two tone intermodulation 7th order (2100 MHz) <-117 dBm for 2x20W Isolation between ports >30 dB
1850 - 2170 16.5 dBi (14.5 dBd) dual linear, +/- 45 <1.5:1 90 7 0 - 8 >30 dB > 25 dB > 18 dB <-20 dB typical 250 W 500 W <-110 dBm for 2x10W <-117 dBm for 2x12W >30 dB
UXM-1850-217090-13.5i-A

Connector Height Width Depth Survival wind speed 7/16 DIN bottom mounted 27.4" (697 mm) 6.6" (167 mm) 3.5" (89.5 mm) 156 mph (70 m/s) 7/16 DIN bottom mounted 51" (1297 mm) 6.6" (167 mm) 3.5" (89.5 mm) 156 mph (70 m/s)
UXM-1850-217090-16.5i-A
*All feed network components DC grounded for Lightning Protection Pole mount and downtilt bracket are pre-mounted. Tilt range -1.5 to +35
-1 to +17
0 -5 -10 -15 -20 -25 -30 -35 -40
0 -5 -10 -15 -20 -25 -30 -35 -40
1 8 5 0
2 1 7 0
M H z
B r o a d
B a n d
A n t e n n a

(UXM-1850-2170-90-18i-A)
7745
UXM-1850-217090-18i-A
Frequency range (MHz) 1850 - 2170 Gain 18 dBi (16 dBd) Polarization dual linear, +/- 45 VSWR, 50 <1.5:1 Horizontal 3dB beamwidth 90 Vertical 3dB beamwidth 4.7 MET (AEDT) 0 - 5 Co-pol 40 degree cone Front-back-ratio >30 dB 40 degree cone Front-to-back ratio, total power >25 dB Suppression of first upper side lobe >18 dB First lower null fill <-18 dB typical Power handling, average per input 250 W Power handling, average total 500 W Two tone intermodulation 3rd order (1800, 1900 MHz) <-110 dBm for 2x10W Two tone intermodulation 3rd order (2100 MHz) <-117 dBm for 2x20W Isolation between ports >30 dB

Connector Height Width Depth Survival wind speed 7/16 DIN bottom mounted 78.7" (2000 mm) 6.6" (167 mm) 3.5" (89.5 mm) 156 mph (70 m/s)
*All feed network components DC grounded for Lightning Protection Pole mount and downtilt bracket are pre-mounted. Tilt range -0.4 to +10.6
Comments Gain is typical within frequency band. Radome color is NCS 2502-B (RAL 7035)(gray). For a complete list of released models pertaining to gain and electrical downtilt, please see the quick reference guide on page 14.
0 -5 -10 -15 -20 -25 -30 -35 -40
1 8 0 0
M H z
D u a l
P o l a r i z e d
A n t e n n a
Features
Slant 45 degree design to optimize performance Superior diversity performance due to patented element design High cross polar discrimination factor High port to port isolation Minimum squint and tracking Superior vertical pattern shaping for interference reduction Optional Manual adjustable Electrical Tilt (MET) for tuning flexibility Can be upgraged to remote controlled RET functionality starting in 2002
Performance
Brackets
Allgon antenna mounts have been carefully designed and tested to ensure a fast and problemfree installation. The mounts are pre-mounted or copacked with the antenna and ready for mounting directly to a pole, outside diameter 1.0 - 5.0 (25125 mm). They can be mounted vertically or tilted, see tilt range specified in each antenna specification. For more information, please see pages 48 - 50.
Design Philosophy
The Allgon Dual Polarized antenna is designed with a slant +/- 45 configuration which has equal signal strengths on both polarizations. The ultra-slim design and sophisticated electrical performance ensures maximum efficiency, as well as a stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. The slant +/- 45 dual polarization system provides the independent fading signals needed for achieving top-quality coverage via diversity concepts. The optional Manual adjustable Electrical Tilt (MET) module is based on a patented sliding dielectric that minimizes intermodulation distortion and maximizes efficiency. The MET function allows you to field-adjust the electrical tilt from 0 to VBW for optimum roll-off effect.
Quality Materials
Proper use of materials and their structure ensure performance integrity. In antennas, the electrical performance is directly related to mechanical structure. The choice of radome material is crucial since it acts as a window between the radiating elements and the coverage area. Our UV stabilized PVC and ASA radomes have extremely low moisture absorption. Further, our radomes withstand mechanical stresses, even at low temperatures and long exposure to UV radiation. For corrosion inhibition, we use aircraft quality aluminum alloy that is inherently resistant to corrosion caused by the environment.
Connectors
7/16 DIN Connector
65 Degree 1800 MHz Dual Polarized Gain Part Number

15 dBi 7600.00 7600.02 7600.06 7601.00 7601.02 7601.06
Description
XM-1800-65-15i-0-D XM-1800-65-15i-2-D XM-1800-65-15i-6-D XM-1800-65-17.5i-0-D XM-1800-65-17.5i-2-D XM-1800-65-17.5i-6-D
Page
21 21 21 21 21 21
17.5 dBi
65 Degree 1800 MHz Dual Polarized with Manual adjustable Electrical Tilt (MET) Gain Part Number
17.5 dBi 7630.00
Description
Page
XM-1800-65-17.5i-A-D 22
X M - 1 8 0 0 - 6 5 - 17.5i - A
7/16 DIN Connector
Cross Polarized Metro Family
Frequency Band
Gain in dBi
Electrical Downtilt Angle or A for MET
A trailing U indicates connector placement on the top, no U indicates connector placement on the bottom.
1 8 0 0
M H z
D u a l
P o l a r i z e d
A n t e n n a
(XM-1800-65-15i)
7600
(XM-1800-65-17.5i)
7601
Gain 15 dBi (13 dBd) linear, dual slant 45 Polarization <1.3:1 VSWR, 50 (1710 MHz to 1880 MHz) 65 Horizontal 3dB beamwidth 15 Vertical 3dB beamwidth 0, 2 & 6 Custom electrical downtilts >23 dB Co-pol 40 degree cone Front-to-back-ratio 40 degree cone Front-to-back ratio, total power >20 dB >18 dB Cross-polar discrimination, boresite >17 dB Suppression of first upper side lobe >-20 dB First lower null fill 500W total at 250W per input Maximum CW input power Two tone intermodulation 3rd order <-110 dBm for 2x10W > 30 dB Isolation between ports
17.5 dBi (15.5 dBd) linear, dual slant 45 <1.3:1 65 7 0, 2 & 6 >20 dB >20 dB >18 dB >17 dB >-20 dB 500W total at 250W per input <-110 dBm for 2x10W >30 dB
Connector Height Width Depth Antenna Weight Weight including tilt brackets Survival wind speed Maximum wind area Frontal wind load @150 km/h 7/16 DIN bottom 697 mm (27.4) 167 mm (6.6) 58 mm (2.3) 2.2 kg (4.9 lb.) 5.8 kg 70 m/s (156 mph) 0.12 sq.m (1.23 sq. ft.) 122N (27.5 lbf) 7/16 DIN bottom 1297 mm (51.1) 167 mm (6.6) 58 mm (2.3) 3.4 kg (7.5 lb.) 7 kg 70 m/s 0.22 sq.m (2.4 sq. ft.) 221 N (53.4 lbf)
XM-1800-65-15i XM-1800-65-17.5i
All metallic components DC grounded for Lightning Protection Pole mount and downtilt bracket included -1.5 to +35 Tilt Range
0 -5 -10 -15 -20 -25 -30 -35 -40
-1 to +17
0 -5 -10 -15 -20 -25 -30 -35 -40
1 8 0 0
M H z
D u a l
P o l a r i z e d
A n t e n n a
(XM-1800-65-17.5i-A)
7630
Gain 17.5 dBi (15.5 dBd) Polarization linear, dual slant 45 VSWR, 50 (1710 MHz to 1880 MHz) <1.4:1 Horizontal 3dB beamwidth 65 Vertical 3dB beamwidth 7 Met (AEDT) 0 to 8 (1 increments) Co-pol 40 degree cone Front-to-back-ratio >23 dB 40 degree cone Front-to-back ratio, total power >20 dB Cross-polar discrimination, boresite >18 dB Suppression of first upper side lobe (0 ET) >19 dB First lower null fill N/A Maximum CW input power 400W at 200 W per input Two tone intermodulation 3rd order <-110 dBm for 2x10W Isolation between ports >30 dB
XM-1800-90-16i
Connector Height Width Depth Antenna Weight Weight including tilt brackets Survival wind speed Maximum wind area Frontal wind load @150 km/h 7/16 DIN bottom 1297 mm (51.1) 167 mm (6.6) 58 mm (2.3) 4.3 kg (9.5 lb.) 7.9 kg 70 m/s (156 mph) 0.22 sq.m (2.4 sq. ft.) 221N (53.4 lbf)
XM-1800-65-17.5i-A
All metallic components DC grounded for Lightning Protection Pole mount and downtilt bracket included Tilt Range -1 to +17
0 -5 -10 -15 -20 -25 -30 -35 -40
9 0 0
M H z
D u a l
P o l a r i z e d
A n t e n n a
Features
Slant 45 degree design to optimize performance Superior diversity performance due to patented element design High cross polar discrimination factor High port to port isolation Minimum squint and tracking Exact aperture angle Superior vertical pattern shaping for interference reduction
Performance
Brackets
Allgon antenna mounts have been carefully designed and tested to ensure a fast and problemfree installation. The mounts are pre-mounted or copacked with the antenna and ready for mounting directly to a pole, outside diameter 1.0 - 5.0 (25125 mm). They can be mounted vertically or tilted, see tilt range specified in each antenna specification. For more information, please see pages 48 - 50.
Design Philosophy
The Allgon Dual Polarized antenna is designed with a slant + 45 configuration which has equal signal strengths. Research has determined that the horizontal/vertical configuration has large differences in mean signal strength between the two branches, because the horizontal component has greater propogation loss than the vertical. Our design is backed by the thorough research and testing to insure the highest possible diversity gain, isolation, and cross polar discrimination.
Quality Materials
Proper use of materials and their structure ensure performance integrity. In antennas, the electrical performance is directly related to mechanical structure. The choice of radome material is crucial since it acts as a window between the radiating elements and the coverage area. Our UV stabilized PVC and ASA radomes have extremely low moisture absorption. Further, our radomes withstand mechanical stresses, even at low temperatures and long exposure to UV radiation. For corrosion inhibition, we use aircraft quality aluminum alloy that is inherently resistant to corrosion caused by the environment.
Testing
Allgon prides itself on stringent testing requirements with conservative, yet realistic claims of the performance of our product offering. For more information on testing procedures, see page 47. Our front-to-back ratios are specified for +20 from 180 (worst case) to 0 in a total power configuration.
Connectors
7/16 DIN Connector
65 Degree 900 MHz Dual Polarized Gain Part Number

12.5 dBi 15.5 dBi 15 dBi 17 dBi 16.5 dBi 18 dBi 17.5 dBi 7216.03 7217.04 7217.03 7255.04 7255.03 7218.05 7218.04 7218.03
Description
XU-900-65-12.5i-0-D XU-900-65-15.5i-0-D XU-900-65-15i-7-D XU-900-65-17i-0-D XU-900-65-16.5i-6-D XU-900-65-18i-0-D XU-900-65-17.5i-4-D XU-900-65-17.5i-6-D
Page
25 25 25 26 26 26 26 26
X U - 9 0 0 - 6 5 - 1 2 . 5 i - 0
7/16 DIN Connector
Cross Polarized Metro Family
Frequency Band
Gain in dBi
Electrical Downtilt Angle or A for MET
A trailing U indicates connector placement on the top, no U indicates connector placement on the bottom.
9 0 0
M H z
D u a l
P o l a r i z e d
A n t e n n a
(XU-900-65-12.5i)
7216
(XU-900-65-15.5i)
7217
Gain 12.5 dBi (10.5 dBd) linear, dual slant 45 Polarization <1.4:1 (880 MHz to 915 MHz) VSWR, 50 <1.3:1 (925 MHz to 960 MHz) VSWR, 50 65 Horizontal 3dB beamwidth 26 Vertical 3dB beamwidth 0 Custom electrical downtilts >24 dB Co-pol 40 degree cone Front-to-back-ratio 40 degree cone Front-to-back ratio, total power >20 dB >20 dB Cross-polar discrimination, boresite >10 dB Suppression of first upper side lobe N/A First lower null fill 250W Maximum CW input power Two tone intermodulation 3rd order <-107 dBm for 2x20W (150 dBc at 2x43 dBm) >30 dB Isolation between ports
15.5 dBi (13.5 dBd) linear, dual slant 45 <1.4:1 (880 MHz to 915 MHz) <1.3:1 (925 MHz to 960 MHz) 65 13 0 & 7 >24 dB >20 dB >20 dB >17 dB N/A 500W at 250W per input <-107 dBm for 2x20W (150 dBc at 2x43 dBm) >30 dB
XU-900-65-12.5i
Connector Height Width Depth Antenna Weight Weight including tilt brackets Survival wind speed Maximum wind area Frontal wind load @150 km/h 7/16 DIN bottom 660 mm (25.9) 256 mm (10.1) 50 mm (2) 4 kg (8.8 lb.) 7.6 kg 55 m/s (123 mph) 0.17 sq.m (1.8 sq. ft.) 190N (42.7 lbf) 7/16 DIN bottom 1320 mm (52) 256 mm (10.4) 50 mm (2) 6.5 kg (14.3 lb.) 10.1 kg 55 m/s (123 mph) 0.33 sq.m (3.6 sq. ft.) 370 N (83.1 lbf)
XU-900-65-15.5i
0 -5 -10 -15 -20 -25 -30 -35 -40
-0.7 to +16
0 -5 -10 -15 -20 -25 -30 -35 -40
9 0 0
M H z
D u a l
P o l a r i z e d
A n t e n n a
(XU-900-65-17i)
7255
(XU-900-65-18i)
7218
17 dBi (15 dBd) Gain linear, dual slant 45 Polarization <1.4:1 (880 MHz to 915 MHz) VSWR, 50 <1.4:1 (925 MHz to 960 MHz) VSWR, 50 65 Horizontal 3dB beamwidth 9 Vertical 3dB beamwidth 0 & 6 Custom electrical downtilts >24 dB Co-pol 40 degree cone Front-to-back-ratio 40 degree cone Front-to-back ratio, total power >20 dB >20 dB Cross-polar discrimination, boresite >17 dB Suppression of first upper side lobe N/A First lower null fill 500W at 250W per input Maximum CW input power Two tone intermodulation 3rd order <-107 dBm for 2x20W (150 dBc at 2x43 dBm) >30 dB Isolation between ports
18 dBi (16 dBd) linear, dual slant 45 <1.5:1 (880 MHz to 915 MHz) <1.4:1 (925 MHz to 960 MHz) 65 6.5 0, 4 & 6 >24 dB >20 dB >20 dB >17 dB N/A 500W at 250W per input <-107 dBm for 2x20W (150 dBc at 2x43 dBm) >30 dB
XU-900-65-18i
Connector Height Width Depth Antenna Weight Weight including tilt brackets Survival wind speed Maximum wind area Frontal wind load @150 km/h 7/16 DIN bottom 1940 mm (76.3) 256 mm (10.1) 50 mm (2) 9 kg (19.8 lb.) 12.6 kg 55 m/s (123 mph) 0.50 sq.m (5.4 sq. ft.) 550 N (123.6 lbf) 7/16 DIN bottom 2580 mm (102) 256 mm (10.4) 50 mm (2) 13 kg (28.7 lb.) 16.6 kg 55 m/s (123 mph) 0.66 sq.m (7.1 sq. ft.) 750 N (168.5 lbf)
XU-900-65-17i
0 -5 -10 -15 -20 -25 -30 -35 -40
-0.4 to +8
0 -5 -10 -15 -20 -25 -30 -35 -40
900 MHz Urban Panel Antenna
9 0 0
M H z
U r b a n
P a n e l
A n t e n n a
Features
Same pattern across the entire frequency band 100% VSWR testing Superior vertical pattern shaping for interference reduction 100% verified for vertical pattern performance Mechanical design allows for thermal expansion Aesthetically pleasing
Performance
The Allgon Slim Panel antennas have verified vertical pattern performance on 100% of the antennas. The product line has a better than 1.4:1 VSWR receive and 1.3:1 transmit. The Slim Panel antenna has consistent, reliable performance from frequency to frequency and product to product.
Brackets
Allgon antenna mounts have been carefully designed and tested to ensure a fast and problemfree installation. The mounts are pre-mounted or co-packed with the antenna and ready for mounting directly to a pole, outside diameter 1.0 5.0 (25-125 mm). They can be mounted vertically or tilted, see tilt range specified in each antenna specification. For more information, please see pages 48 - 50.
Design Philosophy
The Allgon Slim Panel Antenna is designed in a repeatable procedure which requires no tuning or modification, with the specification being the same from product to product. The Urban Slim Panel antenna has a robust mechanical design which does not rely on the radome for support. The radome, which is only for weatherproofing, is set inside the endcaps and allows for thermal expansion.
Quality Materials
Proper use of materials and their structure ensures performance integrity. In antennas, the electrical performance is directly related to mechanical performance. The choice of radome materials is crucial since it acts as a window between the radiating elements and the coverage area. Our UV stabilized PVC radome is resistant to moisture absorption. Furthermore, our radomes can withstand mechanical stresses, even at low temperatures and long exposure to UV radiation. For corrosion inhibition, we use aircraft quality aluminum alloy that is inherently resistant to corrosion caused by the environment.
Testing
Allgon prides itself on stringent testing requirements with conservative, yet realistic claims of the performance of our product offering. For more information on testing procedures, see page 47. Our front-to-back ratios are specified for +20 from 180 (worst case) to 0.
Connectors
7/16 DIN Connector
65 Degree 900 MHz Flat Panel Gain Part Number

13 dBi 15.5 dBi 17 dBi 18 dBi 7225.04 7226.04 7227.04 7228.04 7228.08
90 Degree 900 MHz Flat Panel Page

29 29 30 30 30 16.5 dBi
Description
U-900-65-13i-0-D U-900-65-15.5i-0-D U-900-65-17i-0-D U-900-65-18i-0-D U-900-65-18i-2-D
Gain Part Number

15 dBi 7232.04 7232.07 7233.04
Description
U-900-90-15i-0-D U-900-90-15i-4-D U-900-90-16.5i-0-D
Page
31 31 31
Description Detail:
U - 9 0 0 - 6 5 - 1 5 . 5 i - 0 - D
7/16 DIN Connector Electrical Downtilt Angle
Urban Family
Frequency Band
Gain in dBi
9 0 0
M H z
U r b a n
P a n e l
A n t e n n a
(U-900-65-13i)
7225
(U-900-65-15.5i)
7226
13 dBi (11 dBd) Gain linear, vertical Polarization <1.4:1 (870 MHz to 925 MHz) VSWR, 50 <1.3:1 (925 MHz to 960 MHz) VSWR, 50 65 Horizontal 3dB beamwidth 26 Vertical 3dB beamwidth 0 Custom electrical downtilts >25 dB 40 degree cone Front-to-back ratio >9 dB Suppression of first upper side lobe N/A First lower null fill 300W Maximum CW input power Two tone intermodulation 3rd order <-107 dBm for 2x20W (150 dBc at 2x43 dBm)
15.5 dBi (13 dBd) linear, vertical <1.4:1 (870 MHz to 925 MHz) <1.3:1 (925 MHz to 960 MHz) 65 14 0 >23 dB >17 dB N/A 500W <-107 dBm for 2x20W (150 dBc at 2x43 dBm)
Connector Height Width Depth Antenna Weight Weight including tilt brackets Survival wind speed Maximum wind area Frontal wind load @150 km/h 7/16 DIN bottom 660 mm (26) 256 mm (10.1) 50 mm (2) 5 kg (11 lb.) 8.6 kg 55 m/s (123 mph) 0.17 sq.m (1.8 sq. ft.) 190N (42.7 lbf @ 100 mph) 7/16 DIN bottom 1320 mm (52) 256 mm (10.1) 50 mm (2) 7 kg (15.4 lb.) 10.6 kg 55 m/s (123 mph) 0.34 sq.m (3.6 sq. ft.) 370 N (95.6 lbf @ 100 mph)
U-900-65-13i U-900-65-15.5i
0 -5 -10 -15 -20 -25 -30 -35 -40
-0.6 to +15
0 -5 -10 -15 -20 -25 -30 -35 -40
9 0 0
M H z
U r b a n
P a n e l
A n t e n n a
(U-900-65-17i)
7227
(U-900-65-18i)
7228
17 dBi (15 dBd) Gain linear, vertical Polarization <1.4:1 (870 MHz to 925 MHz) VSWR, 50 <1.3:1 (925 MHz to 960 MHz) VSWR, 50 65 Horizontal 3dB beamwidth 9 Vertical 3dB beamwidth 0 Custom electrical downtilts >23 dB 40 degree cone Front-to-back ratio >17 dB Suppression of first upper side lobe >-13 dB First lower null fill 500W Maximum CW input power Two tone intermodulation 3rd order <-107 dBm for 2x20W (150 dBc at 2x43 dBm)
18 dBi (16 dBd) linear, vertical <1.4:1 (870 MHz to 925 MHz) <1.3:1 (925 MHz to 960 MHz) 65 6.5 0 & 2 >23 dB >19 dB >-20 dB 500W <-107 dBm for 2x20W (150 dBc at 2x43 dBm)
U-900-65-18i
Connector Height Width Depth Antenna Weight Weight including tilt brackets Survival wind speed Maximum wind area Frontal wind load @150 km/h 7/16 DIN bottom 1940 mm (76.4) 256 mm (10.1) 50 mm (2) 11 kg (23.2 lb.) 14.6 kg 55 m/s (123 mph) 0.50 sq.m (5.3 sq. ft.) 550N (140 lbf @ 100 mph) 7/16 DIN bottom 2580 mm (102) 256 mm (10.1) 50 mm (2) 14 kg (30.9 lb.) 17.6 kg 55 m/s (123 mph) 0.66 sq.m (7.1 sq. ft.) 730 N (187 lbf @ 100 mph)
U-900-65-17i
0 -5 -10 -15 -20 -25 -30 -35 -40
-0.4 to +8
0 -5 -10 -15 -20 -25 -30 -35 -40
9 0 0
M H z
U r b a n
P a n e l
A n t e n n a
(U-900-90-15i)
7232
(U-900-90-16.5i)
7233
Gain 15 dBi (14.5 dBd) linear, vertical Polarization <1.4:1 (870 MHz to 925 MHz) VSWR, 50 <1.3:1 (925 MHz to 960 MHz) VSWR, 50 90 Horizontal 3dB beamwidth 9 Vertical 3dB beamwidth 0 & 4 Custom electrical downtilts >20 dB 40 degree cone Front-to-back ratio >-15 dB Suppression of first upper side lobe >-15 dB First lower null fill 500W Maximum CW input power Two tone intermodulation 3rd order <-107 dBm for 2x20W (150 dBc at 2x43 dBm)
16.5 dBi (14.5 dBd) linear, vertical <1.4:1 (870 MHz to 925 MHz) <1.3:1 (925 MHz to 960 MHz) 90 6.5 0 >20 dB >17 dB N/A 500W <-107 dBm for 2x20W (150 dBc at 2x43 dBm)
Connector Height Width Depth Antenna Weight Weight including tilt brackets Survival wind speed Maximum wind area Frontal wind load @150 km/h 7/16 DIN bottom 1940 mm (76.4) 160 mm (6.3) 55 mm (2.2) 9 kg (19.8 lb.) 12.6 kg 55 m/s (123 mph) 0.31 sq.m (3.3 sq. ft.) 340 N (87.8 lbf @ 100 mph) 7/16 DIN bottom 2580 mm (102) 160 mm (6.3) 55 mm (2.2) 11 kg (23.2 lb.) 14.6 kg 55 m/s (123 mph) 0.41 sq.m (4.4 sq. ft.) 450 N (117 lbf @ 100 mph)
U-900-90-15i U-900-90-16.5i
0 -5 -10 -15 -20 -25 -30 -35 -40
-0.4 to +8
0 -5 -10 -15 -20 -25 -30 -35 -40
900 MHz Omnidirectional Antenna
9 0 0
M H z
O m n i d i r e c t i o n a l
A n t e n n a
Features
Extremely rugged Minimized tip deflector Feed path yields consistent RF path and IM performance Able to manage high wind speeds Good power handling No hygroscopic materials Easily adaptive to customer requirements Electrical downtilt available
Performance
The Omni antenna is designed to provide good power handling with low intermodulation. It can survive in wind speed of 156 mph, and also has low deflection of <1 at 156 mph wind speed.
Brackets
Bracket hardware for the Omni is made of only the highest quality acid-proof stainless steel and is available in non-tilt mounting to a pipe. For additional information, see pages 48 - 50.
Design Philosophy
Our Omnidirectional antenna is designed in a repeatable procedure which requires no tuning or modification, with the specification being the same from product to product. The Omni has a somewhat larger diameter allowing room for individual feed of the radiating elements, easy control of the amplitude and phase, and cables of sufficient dimensions for the current. Also, the larger diameter allows for the extruded internal support pipe which gives the Omni its robust and rigid design, a greater survival wind speed, and allows for a radome of extruded PVC plastics, thus avoiding fiberglass.
Quality Materials
Proper use of materials and their structure ensures performance integrity. In antennas, the electrical performance is directly related to mechanical performance. The choice of radome material is crucial since it acts as a window between the radiating elements and the coverage area. The Omni antenna is made of silverplated brass with an allydyne treatment to resist corrosion. Also, the dielectric insulators are made of teflon. Our UV stabilized PVC radome is resistant to moisture absorption and can withstand mechanical stresses, even at low temperatures and long exposure to UV radiation.
Testing
Allgon prides itself on stringent testing requirements with conservative, yet realistic claims of the performance of our product offering. For more information on testing procedures, see page 47.
Connectors
7/16 DIN Connector
Q 900 MHz Omnidirectional Antenna
900 MHz Omni Gain Part Number

11 dBi 4168.11.33.00 4168.11.33.02 4168.11.33.03 4168.11.33.06
900 MHz Omni Electrical Downtilt Inverted Mount Description

O-900-360-11i-0-D O-900-360-11i-2-D O-900-360-11i-3-D O-900-360-11i-6-D
Page
34 34 34 34
Gain Part Number

9 dBd 4168.11.33.52
Description
O-900-360-11i+2-D
Page
34
900 MHz Omnidirectional Antenna Description Detail:
D
7/16 DIN Connector
Omni Family
Frequency Band
Gain in dBi
Electrical Downtilt Angle
900 MHz Omnidirectional Antenna
9 0 0
M H z
O m n i d i r e c t i o n a l
A n t e n n a
Gain Polarization VSWR, 50 VSWR, 50 Horizontal 3dB beamwidth Vertical 3dB beamwidth Custom electrical downtilts Maximum CW input power Two tone intermodulation 3rd order
(O-900-360-11i)
4168.11
11 dBi (9 dBd) linear <1.3:1 (925 MHz to 960 MHz) <1.5:1 (925 MHz to 960 MHz) 360 6.5 0, 2, 3, 6 & +2 500W <-103 dBm for 2x20W (146 dBc at 2x43 dBm)
Connector Height Diameter Antenna Weight Survival wind speed Maximum wind area Frontal wind load @150 km/h 7/16 DIN bottom / inverted mount 3000 mm (118.1) 78 mm (3.1) 11 kg (30.2 lb.) 70 m/s (156 mph) 0.25 sq.m (2.7 sq. ft.) 300 N (56 lbf)
O-900-360-11i
All metallic components DC grounded for Lightning Protection

Comments Gain is typical within frequency band. Front-to-back ratio is defined within 20 from the backwards direction in any plane. Sidelobe suppression and null fill is relative to peak of main beam. Frontal windload is calculated assuming the shape factor C=1 Radome color is NCS 2502-B (RAL 7035)(gray). For a complete list of released models pertaining to gain, electrical downtilt and connector placement, please see the quick reference guide on page 33.
0 -5 -10 -15 -20 -25 -30 -35 -40
I n d o o r
P a n e l
A n t e n n a Indoor Omni Antenna
Features
Perfect for indoor coverage Sleek design Easy to install Feed path yields consistent RF path and IM performance Easily adaptive to customer requirements
Brackets
Bracket hardware for the Indoor omni antenna is designed for easy installation.
Testing
Allgon prides itself on stringent testing requirements with conservative, yet realistic claims of the performance of our product offering. The antenna is tested for VSWR, intermodulation, power handling and gain.
Design Philosophy
Our Indoor omnidirectional antenna is designed in a repeatable procedure which requires no tuning or modification, with the specification being the same from product to product. The Indoor omni antenna is designed to blend into a wall or ceiling inside a building.
Connectors
Type N , female connector.
Quality Materials
Proper use of materials and their structure ensures performance integrity. In antennas, the electrical performance is directly related to mechanical performance. The choice of radome material is crucial since it acts as a window between the radiating elements and the coverage area.
Q Indoor Omni Antenna
Multiband (800 MHz/900 MHz/1800 MHz/1900 MHz/2100 MHz) Omni Gain Part Number
1 dBd 7336.00
Description
Page
ALIC-8/9/18/19/2100-360-3i-O-N 37
Indoor Omni Antenna Description Detail:
A L I C - 800-2100-
3 6 0 -
3 i
0 -
N
N Connector
Indoor Panel Family
Frequency Band
Gain in dBi
Electrical Downtilt Angle
I n d o o r
O m n i
A n t e n n a Indoor Omni Antenna
Gain VSWR, 50, typical Ceiling mounted beamwidth Wall mounted beamwidth Maximum CW input power Two tone intermodulation 3rd order
(ALIC-8/9/18/19/2100-360-3i-O-N)
7336.00
0 to 2 dBi (806-960 MHz) 2 to 6 dBi (1420-2400 MHz) 1.5:1 (806-960 MHz & 1420-2400 MHz) 360 70 40W < -107 dBm for 2x20W (150 dBc at 2x43 dBm)
Connector Width Depth Weight Type N center 7.3" (185 mm) 2.6" (65 mm) 0.5 lbs (0.2 kg)
Comments Gain is typical within frequency band. Radome color is NCS 2502-B (RAL 7035)(gray) for 7190.01 and 7193.01; white for 7336.00. VSWR, 50, worst case, <2:1 ( near the band edges at 806 MHz and 960 MHz )
ALIC-8/9/18/19/ 2100-360-3i-O-N
Allgon Dual Band Antenna 900 MHz Dual Polarized Antenna Tower Top 1800 MHz Dual Polarized Antenna
Feeder Cables Within the Shelter
Allgon Dual Band Filter

Tower Top Feeder Cables Within
Allgon Dual
900 MHz BTS
1800 MHz BTS
900 MHz BTS
1800 MHz BTS
1 ANTENNA PER SECTOR FACE
2 ANTENNAS PER SECTOR FACE
900/1800 MHz Dual Band Solution
9 0 0 / 1 8 0 0
M H z
D u a l
B a n d
S o l u t i o n
Features
Stable pattern across each frequency band 100% IM testing Superior vertical pattern shaping for interference reduction 100% verified for vertical pattern performance Mechanical design allows for thermal expansion Aesthetically pleasing Option with Manual Adjustable Electrical Downtilt (MET) for tuning flexibility
Manual Adjustable Electrical Tilt (MET)

The optional Manual Adjustable Electrical Downtilt (MET) module is based on a patented sliding dielectric that minimizes intermodulation distortion and maximizes efficiency. The MET allow you to field adjust the electrical tilt. For more information on MET, see page 45 .
Benefits
Using three Allgon Dual Band Antennas per sector face, in-band duplexing is not required. You utilize existing Feeder cables. It allows for future 1800 MHz deployment without another tower climb. These can be reduced to two antennas per sector face in full duplex operation (for high environmental impact sites). Using four single band antennas per sector face, you need only two feeder cables per sector. The four single band antennas per sector face allow for ease of mechanical downtilt optimization between bands. You may reduce this setup to three antennas per sector face using a dual polarized 1800 MHz antenna.
Installation Advantages
Save money on cable Reduce wind load on the installation Reduce weight
Design
The Allgon Dual Band Antenna utilizes a dual band feed network to excite the dual band radiating elements. The Allgon Dual Band Antenna and Dual Band Filter can be used together to cut the amount of cable needed in half.
900/1800 MHz Dual Band Solution
65 Maximum Gain Dualband Panel Gain Part Number

15.5 dBi 17.5 dBi 7330.00 7330.02 7330.04 7330.06
65 Equal Gain Dualband Panel Page

41 41 41 41
Description
Gain Part Number

15.5 dBi 15 dBi 7329.00
Description
Page
43
ALXC-900/1800-65-15.5/17.5i-0-D ALXC-900/1800-65-15.5/17.5i-2-D ALXC-900/1800-65-15.5/17.5i-4-D ALXC-900/1800-65-15.5/17.5i-6-D
ALXC-900/1800-65-15.5/15i-0-D
65 Equal Beamwidth Dualband Panel Gain Part Number

16.5 dBd 16 dBd 7331.00 7331.02 7331.04 7331.06
Description
Page
42 42 42 42
ALXC-900/1800-65-16.5/16i-0-D ALXC-900/1800-65-16.5/16i-2-D ALXC-900/1800-65-16.5/16i-4-D ALXC-900/1800-65-16.5/16i-6-D
Dual Band Filter Part Number

9215.01
Description
Filter
Page
44
Packages - Antennas and Filters Part Number

5000.00 5000.02 5000.04 5000.06 5001.00 5001.02 5001.04 5001.06 5010.00
Description
ALXC-7330.00 + 9215.01 ALXC-7330.02 + 9215.01 ALXC-7330.04 + 9215.01 ALXC-7330.06 + 9215.01 ALXC-7331.00 + 9215.01 ALXC-7331.02 + 9215.01 ALXC-7331.04 + 9215.01 ALXC-7331.06 + 9215.01 ALXC-7329.00 + 9215.01
Dualband Antenna
Description Detail:
A L X C - 9 0 0 / 1 8 0 0 - 6 5 - 1 5 . 5 i / 1 7 . 5 i - 0 D
7/16 DIN Connector Electrical Downtilt Angle or A for MET
Dual Band Family
Frequency Bands
Gain in dBi 900 MHz
Gain in dBi 1800 MHz
9 0 0 / 1 8 0 0
Gain
M H z
D u a l
B a n d
7330
A n t e n n a
900/1800 MHz Dualband Antenna
(ALXC-900/1800-65-15.5/17.5i)
15.5 dBi (13.5 dBi) 870 to 960 MHz 17.5 dBi (15.5 dBd) 1710 to 1880 MHz linear, dual slant 45 Polarization <1.5:1 RX, 1.3:1 TX VSWR, 50 65 Horizontal 3dB beamwidth 13 (870 MHz - 960 MHz) Vertical 3dB beamwidth 7 (1710 MHz - 1880 MHz) 0, 2, 4 & 6 (same tilt angle for both bands) Custom electrical downtilts >26 dB co-polar, >22 dB total power 40 degree cone Front-to-back ratio >16 dB Suppression of first upper side lobe >20 dB (870 MHz - 960 MHz) First lower null fill >-18 dB (1710 MHz - 1880 MHz) 600W (total) Maximum CW input power, 300 W per port >11 dB Cross polar discrimination <-107 dBm for 2x20W Two tone intermodulation 3rd order (900 MHz) (150 dBc at 2x43 dBm) <-110 dBm for 2x10W Two tone intermodulation 3rd order (1800 MHz) (150 dBc at 2x40 dBm)
ALXC-900/180065-15.5/17.5i
Connector 7/16 DIN bottom Height 1450 mm (53.1) Width 280 mm (11) Depth 125 mm (4.9) Antenna Weight 10.8 kg (20.7 lb.) Weight including tilt brackets 14.4 kg Survival wind speed 70 m/s (156 mph) Maximum wind area 0.41 sq.m (4.1 sq. ft.) Frontal wind load @150 km/h 450 N (107 lbf) All metallic components DC grounded for Lightning Protection Pole mount and downtilt bracket included Tilt Range -0.6 to +15
0 -5 -10 -15 -20 -25 -30 -35 -40
0 -5 -10 -15 -20 -25 -30 -35 -40
Typical Horizontal and Vertical 7330.00 Patterns at 900 MHz
900/1800 MHz Dual Band Antenna
9 0 0 / 1 8 0 0
Gain
M H z
D u a l
B a n d
7331
A n t e n n a
(ALXC-900/1800-65-16.5/16i)
16.5 dBi (14.5 dBi) 870 to 960 MHz 16 dBi (14 dBd) 1710 to 1880 MHz linear, dual slant 45 Polarization <1.5:1 RX, 1.3:1 TX VSWR, 50 65 Horizontal 3dB beamwidth 9 (870 MHz - 960 MHz) Vertical 3dB beamwidth 9 (1710 MHz - 1880 MHz) 0, 2, 4, & 6(same tilt angle for both bands) Custom electrical downtilts >25 dB co-polar, >21 dB total power 40 degree cone Front-to-back ratio >16 dB Suppression of first upper side lobe >-22 dB (870 MHz - 960 MHz) First lower null fill >-22 dB (1710 MHz - 1880 MHz) 600W (total) Maximum CW input power, 300 W per port >11 dB Cross polar discrimination <-107 dBm for 2x20W Two tone intermodulation 3rd order (900 MHz) (150 dBc at 2x43 dBm) <-110 dBm for 2x10W Two tone intermodulation 3rd order (1800 MHz) (150 dBc at 2x40 dBm)
ALXC-900/180065-16.5/16i
0 -5 -10 -15 -20 -25 -30 -35 -40
0 -5 -10 -15 -20 -25 -30 -35 -40
9 0 0 / 1 8 0 0
Gain
M H z
D u a l
B a n d
7329
A n t e n n a
900/1800 MHz Dualband Antenna
(ALXC-900/1800-65-15.5/15i)
15.5 dBi (13.5 dBi) 870 to 960 MHz 15 dBi (13 dBd) 1710 to 1880 MHz linear, dual slant 45 Polarization <1.5:1 RX, 1.3:1 TX VSWR, 50 65 Horizontal 3dB beamwidth 13 (870 MHz - 960 MHz) Vertical 3dB beamwidth 13 (1710 MHz - 1880 MHz) 0 (same tilt angle for both bands) Custom electrical downtilts >26 dB co-polar, >22 dB total power 40 degree cone Front-to-back ratio >13 dB Suppression of first upper side lobe N/A (870 MHz - 960 MHz) First lower null fill >-20 dB (1710 MHz - 1880 MHz) 600W (total) Maximum CW input power, 300 W per port >11 dB Cross polar discrimination <-107 dBm for 2x20W Two tone intermodulation 3rd order (900 MHz) (150 dBc at 2x43 dBm) <-110 dBm for 2x10W Two tone intermodulation 3rd order (1800 MHz) (150 dBc at 2x40 dBm)
ALXC-900/180065-15.5/15i
0 -5 -10 -15 -20 -25 -30 -35 -40
0 -5 -10 -15 -20 -25 -30 -35 -40
900/1800 MHz Dual Band Filter
9 0 0 / 1 8 0 0
M H z
D u a l
B a n d
F i l t e r
9215.01
Frequency Range 872-960 MHz and 1710-1880 MHz Isolation > 50 dB between the single band ports Insertion Loss, 900 MHz < 0.2 dB between the combined and 900 MHz port Insertion Loss, 1800 MHz < 0.2 dB between the combined and 1800 MHz port Return Loss > 20 dB all ports Maximum Average Power 300W (900 MHz) or 150W (1800 MHz) Typical Combined Maximum Average Power 150W (900 MHz) and 75W (1800 MHz) Two tone intermodulation 3rd order < -110 dBm for 2x20W (153 dBc at 2x43 dBm) Lightning Protection IEC 1312-1 and IEC 1000-4-5 Note: Electrical specifications under normal operating conditions with an antenna Return Loss better than 14 dB, 1.5:1 VSWR.
Connector Height Width Depth Weight Housing Temperature Range, Operational Temperature Range, Storage 7/16 DIN plug all three ports 50 mm(2) 190 mm (7.5) 60 mm (2.4) excluding connectors 1.4 kg (3.1 lbs) IP 65 -40C to +55C -45C to +85C
1020
1240
1350
1460
1570
1680
1790
0 Insertion Loss (dB) -10 -20 -30 -40 -50 -60 -70 Frequency MHz 900 MHz port to combined port 900 MHz port to 1800 MHz port 1800 MHz port to combined port
1900
1130
800
910
9215.01 Filter Curves
A n t e n n a
B e a m
T i l t
Antenna Beam Tilt
General
In early analog networks, antenna beam tilt was used in order to improve the system performance. The proven effect is that a better illumination control can be achieved. Mechanical antenna tilt was the inital method used in the industry but electriccal down tilt has become the common industry method. The difference between mechanical and electrical down tilt can be examined in figure 1.
MechanicallDowntilt Mec hanic a Downtilt
Electrical Downtilt E lec tric al Downtilt
Radiation intensity does not change at 90 degrees Radiation intensity does not change at 90 degrees
Figure 1
Radiation intensity decreases uniformly along horizon Radiation intensity decreases uniformly along horizon
A n t e n n a
B e a m
T i l t
Antenna Beam Tilt
Note that with mechanical down tilt, the full effect is only seen in one direction (main) and consequently the tilt effect is greater in that direction than others. However, with electrical tilting, the effect is almost the same in all azimuth directions, maintaining the footprint shape while reducing the total illuminated area. Initially the electrical tilt was fixed and factory set and field adjustments were made through mechanical tilting. This is still the most common method in 2G networks. However, Allgon has produced and delivered antennas with field adjustable electrical downtilt MET (AEDT) since mid the 1990's. A lesson from 2G is that flexibility in coverage is of greatest value in the initial rollout phase when the network is immature and the traffic patterns and system behavior are less known. Obviously an operator with experience from 2G systems will have an advantage to those without, since at least the traffic pattern for speech is known. In the discussion and planning of the 3G-network rollout, further flexibility methods of illumination control have been addressed. This has resulted in a number of new acronyms such as, Fixed Electrical Tilt (FET), a traditional fixed factory set electrical tilted antenna. Manually adjustable Electrical down Tilt = MET (AEDT) where adjustments are made up in the tower on the physical antenna structure turning a knob or pulling a steering rod.
New Allgon MET (AEDT) Concept

Allgons new MET (AEDT) module is based on a patented sliding dielectric that minimizes intermodulation distortion and maximizes efficiency. The MET design ensures constant electrical quality. Dual band antennas with four connector ports allow separate tilts on each frequency band and ensure the use of diversity concepts. The MET allows you to field-adjust the electrical tilt from 0 to the first null at horizon, for optimum roll-off effect. Equipping your system with Allgons MET antennas prepares you for optimum control of your cell limits, thus allowing for optimized soft/softer handover areas. Allgons MET functionality and reliability optimizes your system for the future. The MET (AEDT) function is included in Allgons antennas released during 2001 such as the UMTS, XMetro and DXC families. It will also be included in the broad band antenna families under development. Advantages with MET (AEDT) function include: Independent adjustable electrical down-tilt for tuning flexibility on both bands for dual band antennas Field-adjustable in 1-degree increments, from 0 to first null at horizon Prepared for remote-controlled RET functionality
T e s t i n g Testing Procedures
P r o c e d u r e s
Allgon prides itself on stringent testing requirements with conservative, yet realistic claims of the performance of our product offering. Our antennas are evaluated on performance and reliability.
Performance
Electrical performance can be subdivided into a set of parameters/tests that characterizes the antennas ability to function well; however, good performance is also the sign of good quality and that a lot of effort has been put into the antenna at the design stage. Every Allgon antenna is verified with the following list of parameters: Radiation Pattern Horizontal Beamwidth Elevational beamwidth First upper sidelobe suppression Intermodulation Products Gain Power Handling Return Loss Lightning Protection Durability Electrical tilt angle Front-to-Back Ratio First null fill below horizon
Reliability
The mechanical stability of an antenna directly effects its electrical performance, therefore our antennas are designed to withstand the harshest conditions and still perform appropriately. Allgon antennas are mechanically verified by the following sequence. (These environmental tests are performed as a general specification. The antenna families may have a few individual changes to the specification). Temperature Change IEC 60068-2-14, test Nb 1C/min -45C - to 60C, 10 cycles Dry Heat (Non operating) Cold (Non operating) Water and Dust Random Vibration IEC 68-2-2, test Bb, +70C, 16 hours
IEC 68-2-1, test Ab, -55C, 16 hours
IEC 68-2-18, test Rb 2.2, 30 min 60 spray angle IEC 60068-2-64, test Fh, severity 1.0 m2/s3 frequency: 5-20 Hz and severity -3 dB/oct frequency 20-200 Hz, duration: 30 min in each of three perpendicular directions. Zero tilt of standard tilt bracket is to be used. IEC 60028-2-6, test Fc, severity 1.2 mm displacement for frequecies 5-9 Hz and 10 m/s2 for frequencies 9-200 Hz 5 sweep cycles at zero tilt and 5 sweep cycles at maximum titl (standard tiltbrackets to be used), sweep rate: 1 oct/min in three perpendicular directions IEC 68-2-11, test Ka, 35C, 48h, 5% salt IEC 68-2-5, test Sa, procedure C, 56 days at,40C, performed only on UV exposed and UV sensitive parts Operating 55m/s verified by calculations or static text, survival 70 m/s verified by calculations or static test
Sinus Vibration
Salt Mist UV Radiation
Air Movement
M o u n t i n g
B r a c k e t s Mounting Brackets
All Allgon antennas are delivered with mounting brackets included. It's a policy designed to reduce your workload and save you money in areas such as tower crew installation costs. All antennas, except the City (800 MHz Panel), ALVC (800/1900 MHz Dualband), and ALX, will have these mounting brackets pre-mounted. The pre-mounted brackets are functionally equivalent to the 7254.10 brackets, with the same tilt range. The City, ALVC, and ALX antennas will have co-packed brackets. The new brackets have a high quality surface treatment to maintain Allgon's standards for product exposure to severe environments. Rigidity has been improved by using steel instead of aluminum in the sheet metal parts of the tilt brackets. The tilt brackets are suitable for the majority of the antennas, except for antennas shorter than 20 (0.5 m), which come with no tilting option.
Mounting with Included Brackets:
Tilt mechanism in tilted position
Tilt mechnism in 0 position
Short antennas without tilt or tall antennas with tilt removed
Lower part
Omni antenna mounting
M o u n t i n g Mounting Brackets
B r a c k e t s
Optional Mounting Brackets Bracket

2201.11 7455.00 2187.0000 7454.00 2198.10 7456.00
Description
Wall and panning kit Flush wall and pole brackets - max 59 (1.5m) Upside-down kit for Omni Triple mount Tilt extender Replacement tilt bracket, 2 mounting points
Mounting with wall- and paninng kit 2201.11:
Panned and tilted
Panned, not tilted
Lower part panned
Wall mounting with flush wall and pole brackets, 7455.00:
Pole mount with flush wall and pole brackets 7455.00
Omni antenna with upside down kit 2187.0000
M o u n t i n g
B r a c k e t s Mounting Brackets
Optional Mounting Brackets

Mounting with Triple Mount 7454.00 Triple mount can be used with broad or narrow antennas, tilted or not tilted as the pictures show, used together or with tilt as well.
Organized by Part Number
Organized by Product Description
Part Number
Product Description
Page
49 49 49 34 34 34 34 34 25 25 25 26 26 26 29 29 30 30 30 31 31 31 26 26 43 41 41 41 41 42 42 42 42 37 49 49 49 7 7 7 7 7 7 8 8 9 21 21 21 21 21 21 22 15 15 15 15 16 16 17 17 18 44 10 11 12
Part Number
7336.00 7329.00 7330.00 7330.02 7330.04 7330.06 7331.00 7331.02 7331.04 7331.06 4168.11.33.00 4168.11.33.02 4168.11.33.03 4168.11.33.06 4168.11.33.52 7225.04 7226.04 7227.04 7228.04 7228.08 7232.04 7232.07 7233.04 7500.00 7500.02 7500.06 7521.00 7501.00 7501.02 7501.06 7520.00 7540.00 7700.00 7700.06 7701.00 7701.06 7721.00 7722.00 7735.00 7740.00 7745.00 7600.00 7600.02 7600.06 7601.00 7601.02 7601.06 7630.00 7216.03 7217.03 7217.04 7255.03 7255.04 7218.03 7218.04 7218.05
Product Description
Page
37 43 41 41 41 41 42 42 42 42 34 34 34 34 34 29 29 30 30 30 31 31 31 7 7 7 8 7 7 7 8 9 15 15 15 15 16 16 17 17 18 21 21 21 21 21 21 22 25 25 25 26 26 26 26 26 49 49 49 49 49 49 44 10 12 11
2187.0000 UPSIDE-DOWN KIT OMNI 2198.10 Tilt extender kit 2201.01 PANNING WALLBRACKET 3MNTPOINTS 4168.11.33.00 O-900-360-11i-0-D 4168.11.33.02 O-900-360-11i-2-D 4168.11.33.03 O-900-360-11i-3-D 4168.11.33.06 O-900-360-11i-6-D 4168.11.33.52 O-900-360-11i+2-D 7216.03 XU-900-65-12.5i-0-D 7217.03 XU-900-65-15i-0-D 7217.04 XU-900-65-15.5i-0-D 7218.03 XU-900-65-17.5i-6-D 7218.04 XU-900-65-17.5i-4-D 7218.05 XU-900-65-18i-0-D 7225.04 U-900-65-13i-0-D 7226.04 U-900-65-15.5i-0-D 7227.04 U-900-65-17i-0-D 7228.04 U-900-65-18i-0-D 7228.08 U-900-65-18i-2-D 7232.04 U-900-90-15i-0-D 7232.07 U-900-90-15i-4-D 7233.04 U-900-90-16.5i-0-D 7255.03 XU-900-65-16.5i-6-D 7255.04 XU-900-65-17i-0-D 7329.00 ALXC-900/1800-65-15.5/15i-0-D 7330.00 ALXC-900/1800-65-15.5/17.5i-0-D 7330.02 ALXC-900/1800-65-15.5/17.5i-2-D 7330.04 ALXC-900/1800-65-15.5/17.5i-4-D 7330.06 ALXC-900/1800-65-15.5/17.5i-6-D 7331.00 ALXC-900/1800-65-16.5/16i-0-D 7331.02 ALXC-900/1800-65-16.5/16i-2-D 7331.04 ALXC-900/1800-65-16.5/16i-4-D 7331.06 ALXC-900/1800-65-16.5/16i-6-D 7336.00 ALIC-8/9/18/19/2100-360-3i-0-N 7454.00 Triple mount bracket 7455.00 Flush wall and pole brackets 7456.00 Replacement tilt bracket, 2 mounting points 7500.00 UX-2100-65-15.5i-0-D 7500.02 UX-2100-65-15.5i-2-D 7500.06 UX-2100-65-15.5i-6-D 7501.00 UX-2100-65-18i-0-D 7501.02 UX-2100-65-18i-2-D 7501.06 UX-2100-65-18i-6-D 7520.00 UX-2100-65-18i-A-D 7521.00 UX-2100-65-15.5i-A-D 7540.00 UXC-1800/2100-65-17.5/18i-A-D 7600.00 XM-1800-65-15i-0-D 7600.02 XM-1800-65-15i-2-D 7600.06 XM-1800-65-15i-2-D 7601.00 XM-1800-65-17.5i-0-D 7601.02 XM-1800-65-17.5i-2-D 7601.06 XM-1800-65-17.5i-6-D 7630.00 XM-1800-65-17.5i-A-D 7700.00 UXM-1710-2170-65-15i-0-D 7700.06 UXM-1710-2170-65-15i-6-D 7701.00 UXM-1710-2170-65-18i-0-D 7701.06 UXM-1710-2170-65-18i-6-D 7721.00 UXM-1710-2170-65-18i-A-D 7722.00 UXM-1710-2170-65-19i-A-D 7735.00 UXM-1850-2170-65-13.5i-A-D 7740.00 UXM-1850-2170-65-16.5i-A-D 7745.00 UXM-1850-2170-65-18i-A-D 9215.01 900/1800 MHz Dualband Filter 9281.01 UMTS Dualband Filter 9282.01 UMTS Triple band Filter 9283.01 UMTS Rejection FIlter ALIC => Allgon Indoor panel ALXC => Allgon dualband O => Omni U => Urban UX => Allgon UMTS Cross polarized UXM => Allgon Broad Band XM => Cross polarized Metro XU => Cross polarized Urban
ALIC-8/9/18/19/2100-360-3i-0-N ALXC-900/1800-65-15.5/15i-0-D ALXC-900/1800-65-15.5/17.5i-0-D ALXC-900/1800-65-15.5/17.5i-2-D ALXC-900/1800-65-15.5/17.5i-4-D ALXC-900/1800-65-15.5/17.5i-6-D ALXC-900/1800-65-16.5/16i-0-D ALXC-900/1800-65-16.5/16i-2-D ALXC-900/1800-65-16.5/16i-4-D ALXC-900/1800-65-16.5/16i-6-D O-900-360-11i-0-D O-900-360-11i-2-D O-900-360-11i-3-D O-900-360-11i-6-D O-900-360-11i+2-D U-900-65-13i-0-D U-900-65-15.5i-0-D U-900-65-17i-0-D U-900-65-18i-0-D U-900-65-18i-2-D U-900-90-15i-0-D U-900-90-15i-4-D U-900-90-16.5i-0-D UX-2100-65-15.5i-0-D UX-2100-65-15.5i-2-D UX-2100-65-15.5i-6-D UX-2100-65-15.5i-A-D UX-2100-65-18i-0-D UX-2100-65-18i-2-D UX-2100-65-18i-6-D UX-2100-65-18i-A-D UXC-1800/2100-65-17.5/18i-A-D UXM-1710-2170-65-15i-0-D UXM-1710-2170-65-15i-6-D UXM-1710-2170-65-18i-0-D UXM-1710-2170-65-18i-6-D UXM-1710-2170-65-18i-A-D UXM-1710-2170-65-19i-A-D UXM-1850-2170-65-13.5i-A-D UXM-1850-2170-65-16.5i-A-D UXM-1850-2170-65-18i-A-D XM-1800-65-15i-0-D XM-1800-65-15i-2-D XM-1800-65-15i-2-D XM-1800-65-17.5i-0-D XM-1800-65-17.5i-2-D XM-1800-65-17.5i-6-D XM-1800-65-17.5i-A-D XU-900-65-12.5i-0-D XU-900-65-15i-0-D XU-900-65-15.5i-0-D XU-900-65-16.5i-6-D XU-900-65-17i-0-D XU-900-65-17.5i-6-D XU-900-65-17.5i-4-D XU-900-65-18i-0-D
Antenna Mounting Hardware 7455.00 Flush wall and pole brackets 7456.00 Replacement tilt bracket, 2 mounting points 2198.10 Tilt extender kit 7454.00 Triple mount bracket 2187.0000 UPSIDE-DOWN KIT OMNI 2201.01 PANNING WALLBRACKET 3MNTPOINTS 9215.01 9281.01 9283.01 9282.01 Filters 900/1800 MHz Dualband Filter UMTS Dualband Filter UMTS Rejection FIlter UMTS Triple band Filter
Index Page 51
Brazil
Allgon Telecom Ltda. Rua Alexandre Dumas, 2220 cj. 42 04717-004 So Paulo, SP Ph +55-11-5185.6948 / 6932 Fax +55-11-5181.4002 [email protected]
China
Allgon System Beijing Rm 1823, Tower 2 Bright China Changan Building No. 7, Jianguomennei Avenue Dongcheng District 100005 Beijing Tel: +86 10 6510 2018 Fax: +86 10 6510 2017 Allgon Limited 23/F, Tai Yau Building 181 Johnston Road, Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Germany
Allgon System GmbH Gewerbestrasse 29, 21279 Hollenstedt Tel: +49 4165 2197 0 Fax: +49 4165 2197 90 [email protected]
Sweden
Allgon System AB Antennvagen 6 SE-187 80 Taby Tel: +46 540 834 80 Fax: +46 540 824 85 [email protected]
United Kingdom
Allgon Systems UK Unit 2 Clayfield Close Moulton Park Industrial Estate Northampton NN3 6QF Tel: +44 1604 494132 Fax: +44 1604 790484
USA
Allgon Telecom Ltd. 15051 FAA Blvd. Fort Worth, TX 76155 Tel: +1 817 684 4500 Fax: +1 817 684 3502 [email protected] www.allgon.com ALGPC0201

2002 Product Catalog 900 - 1800

Uploaded by

Copyright:

Available Formats

2002 Product Catalog 900 - 1800

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2002 Product Catalog 900 - 1800

Uploaded by

Copyright:

Available Formats

Allgon Antenna Systems

Allgon 2100 MHz Dual Polarized Antennas,

Allgon Broadband Antennas (UXM)

Allgon 1800 MHz Dual Polarized Antennas (XM)

Allgon 900 MHz Dual Polarized Antennas (XU)

Allgon 900 MHz Urban Panel Antennas (U)

Allgon Omnidirectional Antennas (O)

Allgon Indoor Antennas (CO, ALIC)

Allgon 2G Dualband Solution (ALVC, DXC)

Optimized Radio Performance

Base Station Antennas Page 4

A n t e n n a 2100 MHz Dual Polarized Antenna

Base Station Antennas Page 5

2100 MHz Dual Polarized Antenna

65 Degree Dualband GSM 1800/2100 Antenna with MET Page

Gain Part Number

UMTS Filters Part Number

2100 MHz Dual Polarized Antenna Description Detail:

UMTS Dual Polarized Family

Antennas may be ordered using part number or description.

Base Station Antennas Page 6

2100 MHz Dual Polarized Antenna

0 -5 -10 -15 -20 -25 -30 -35 -40

Typical Horizontal and Vertical 7500.02 Patterns

Typical Horizontal and Vertical 7501.02 Patterns

Base Station Antennas Page 7

2100 MHz Dual Polarized Antenna

0 -5 -10 -15 -20 -25 -30 -35 -40

0 -5 -10 -15 -20 -25 -30 -35 -40

Typical Horizontal and Vertical 7521.00 Patterns

Typical Horizontal and Vertical 7520.00 Patterns

Base Station Antennas Page 8

2100 MHz Dual Polarized Antenna

Typical Horizontal and Vertical 7540.00 Patterns

Base Station Antennas Page 9

U M T S UMTS Dualband Filter

(Dualband filter GSM 1800/UMTS)

Dualband Filter GSM 1800/UMTS

Connector (all ports) 1) Height Width 2) Depth Weight

7/16 female 60 mm (2.4 ) 190 mm (7.5 ) 110 mm (4.3) <2.0 kg

Dualband Filter GSM 1800 / UMTS

Base Station Antennas Page 10

F i l t e r UMTS Rejection Filter

(GSM 1800 MHz rejection filter for UMTS)

1800 MHz Rejection Filter

BTS port ANT port

7/16 male 7/16 female 60 mm (2.4) 65 mm (2.6) 160 mm (6.3) <2.0 kg

GSM 1800 MHz rejection filter for UMTS

Base Station Antennas Page 11

U M T S UMTS Triple band Filter

Available in volume Q3 2002

Triple band Filter GSM 900/GSM 1800/ UMTS

7/16 male 80 mm (3.1) 200 mm (7.9) 110 mm (4.3) <2.0 kg

Base Station Antennas Page 12

A n t e n n a 1710 - 2170 MHz Broad Band Antenna

Available in volume in Q3 2002.

Base Station Antennas Page 13

Q 1710 - 2170 MHz Broad Band Antennas

65 Degree 1710 - 2170 MHz Dual Polarized Gain Part Number