Harman

Harman Professional 2015

Catalog 2015
Professional Catalog

CONE TRANSDUCERS &

COMPRESSION DRIVERS
2226H/J

HIGH QUALITY COMPONENTS FROM JBL

Manufacturing our own component transducers has historically set
JBL apart from most other loudspeaker system manufacturers, and
some of our numerous component transducers are available as sales
2241H models. All low-frequency units and compression drivers have been
pre-qualified during the design phase with JBL's rigorous 100-hour
2206H 'torture test'. Units shown are legendary workhorses, often purchased
in quantity for use in custom system designs.

2450H/J

2426H/J

2451H/J
LOUDSPEAKER COMPONENTS

2242H
TRANSDUCERS & DRIVERS

2206H, 2226H/J, 2241H

VGC™ SERIES CONE TRANSDUCERS
Incorporate JBL’s patented Vented Gap Cooling technology in an improved Symmetrical Field Geometry (SFG) magnet
structure. JBL engineers optimized both magnet weight, flux density and field saturation resulting in reduction of overall
driver weight and a significant reduction in harmonic distortion.

2242H
SVG™ SERIES CONE TRANSDUCERS
Incorporates JBL’s patented Super Vented Gap™ technology for improvement in power handling capability while minimizing
power compression.

2426H/J
25MM 1" EXIT COMPRESSION DRIVER
Incorporates JBL’s titanium diamond diaphragm for ruggedness and outstanding frequency response.

2451H/J
38MM 1.5" EXIT COMPRESSION DRIVER
The 38 mm exit on the 2451H/J compression driver allows the Coherent Wave™ phasing plug to directly couple with
Optimized Aperture™ Bi-Radial® horns for lower distortion and better coverage control. The large format 100 mm
(4 in) diaphragm design includes JBL’s exclusive three dimensional diamond pattern which increases the driver’s output in
the 5 kHz to 20 kHz range when combined with the Coherent Wave phasing plug.

2450H/J
49MM 2" EXIT COMPRESSION DRIVER
The 2450H/J uses the optimized configuration of the Coherent Wave phasing plug design, offering coherent summation of
acoustical power up to much higher frequencies than previous designs. It also incorporates a neodymium rare-earth magnet
assembly that provides the equivalent electromechanical conversion efficiency at two-thirds the size and one-third the
weight required by previous large format compression driver designs.

Page 296
 Harman
HarmanProfessional Catalog2015
ProfessionalCatalog 2014
2015

HORNS &
ACCESSORIES
HIGH QUALITY COMPONENTS FROM JBL

OPTIMIZED APERTURE™
MID-SIZE BI-RADIAL® HORN
MODEL 2352

2509A
2370A
2382A

LOUDSPEAKER COMPONENTS
HORNS
2352
OPTIMIZED APERTURE™ MID-SIZE BI-RADIAL® HORN
The Optimized Aperture Mid-Size Bi-Radial Horns are designed to provide high sound pressure level at low distortion over
the bandwidth of 630 Hz to beyond 18 kHz with very uniform horizontal and vertical coverage from an optimum size horn.
Extensive modeling was used to optimize the coverage pattern, reducing both distortion and size.

2370A, 2380A, 2382A, 2385A

FLAT-FRONT BI-RADIAL® HORNS
The Flat-Front Bi-Radial Horns are designed for flush cabinet mounting or compact cluster applications. The horns provide
uniform on and off axis frequency response at the rated frequencies.

The horn’s small vertical mouth dimension (just slightly larger than the compression driver used to drive the horn) allows
very compact single and multiple horn/driver systems to be put together. Should vertical pattern control be required below
2 kHz, two or more horns may be stacked vertically to restore full Bi-Radial™ performance.

2509A
HORN/DRIVER MOUNTING SYSTEM
The 2509 Professional Mounting Bracket is designed to facilitate easy installations and quick adjustability in a variety of
applications. It is manufactured of rugged 1⁄8" steel and finished in black matte. The 2509 Professional Mounting Bracket is
not intended for suspension applications.

The 2509A is a two piece system that allows aiming and rotation in three planes—vertical, horizontal and rotation around
axis. The width of the mounting slots and an included adaptor gasket allow use with the 2350 Series and the 2380 Series.

Page 297
 Harman
Harman Professional 2015
Catalog 2015
Professional Catalog

COOLING SYSTEM
DETAIL

SURROUND
DETAILS

18SWS1000

SUBWOOFER LINE COMPONENTS

LINE

HIGH POWER SUBWOOFER • 4” diameter spun laced fiberglass former

withstands high temperatures and is mechanically

SUBWOOFERS LINE

for professional use. strong.

• Recommended for use as a subwoofer in a bass reflex or horn • Cone is reinforced with non pressed synthetic

loaded cabinets. fibers that greatly improve mechanical stability during

large excursions.
• Capabilities: High power handling, Large linear excursion.
• Fabric surround treated with rubberized materials

• Bandpass extension into the very low frequency zone. for greater durability, better damping, and reduced
standing waves.
• High power output with low distortion.
• Exclusive MCS™ - Multi Cooling System for high

• Magnetic assembly was designed with Finite Element Analysis SPL with less power compression.
(FEA) for precise utilization and distribution of the magnetic field.
• Die-cast Aluminum frame is durable and made to

• Double poly-cotton spider for precise centering and increased perform.

linear displacement of the cone & coil.
• High strength structural adhesives combined with

materials that have good thermal resistance increase

durability and reliability.

SPECIFICATIONS
MODEL 15SWS800 15SWS1000 15SWS1100 15SWS1200 18SWS800 18SWS1000 18SWS1100 18SWS1200
Diameter 15” 15” 15” 15” 18” 18” 18” 18”
Impedance (Ω) 8 8 8 8 8 8 8 8
RMS (W) 800 1,000 1,100 1,200 800 1,000 1,100 1,200
Musical Program (W) 1,600 2,000 2,200 2,400 1,600 2,000 2,200 2,400
SPL 1W @ 1m (dB) 93 95 95 95 95 96 97 96

Frequency Resp. @ -10dB (Hz) 35 to 1,500 38 to 2,000 35 to 3,500 40 to 20,000 30 to 1,500 37 to 2,000 30 to 3,000 37 to 20,000
Resonance (Hz) 37 36 37 41 32 37 34 35
Voice Coil diameter in. (mm) 4 (100)
Edge wound
Voice Coil 4 Layer Cu 4 Layer Al Edge wound Al 4 Layer Al 4 Layer Cu 4 Layer Al 4 Layer Al
Al
Magnet Weight oz. (g) 120 (3,400) 121.34 (3,400) 120 (3,400) 120 (3,400) 120 (3,400) 121.34 (3,440)
Basket Die cast aluminum with epoxy finish

Page 298
 Harman
HarmanProfessional Catalog2015
ProfessionalCatalog 2014
2015

12MB3P 10MB3P

MIDBASS LINE COMPONENTS

LINE

MIDBASS EFFICIENT • Edge treated surrounds are either accordion

MIDBASS LINE
or m-roll style to increase linearity during large
excursions. Added advantages include the reduction
of standing waves and improved acoustic coupling.
• For midbass cabinets that require high power handling,

efficiency, high fidelity, and low distortion. • Efficient venting cools the voice coil which reduces

power compression, increases reliability and raises

• Extremely versatile these speakers can be used in two-way, maximum SPL.
three-way and line array systems.
• Low profile die cast aluminum frame is easer
• Magnet structure was designed with Finite Element to install in smaller, shallower and horn loaded
Software (FEA) so that the magnetic field was optimized and enclosures.
evenly distributed. The 12” model has a copper shorted turn
on the pole piece to lower distortion and extended the upper • High temperature structural adhesives form a

frequency response. material bond with high sheer strength greatly

improving the durability and reliability of the product.
• Specially treated paper cone is reinforced with special fibers

making it lighter, stronger and better sounding in the midbass.

SPECIFICATIONS
MODEL 8MB4P 10MB3P 12MB3P
Diameter 8” 10” 12”
Impedance (Ω) 8 8 8
RMS (W) 250 300 500
Musical Program (W) 500 600 1,000
SPL 1W @ 1m (dB) 97 100 101
Frequency Resp. @ -10dB (Hz) 80 to 5,000 150 to 12,000 90 to 4,000
Kapton® - Trademark Du Pont

Resonance (Hz) 105 80 61

Voice Coil Diameter in.(mm) 1.8 (47) 3 (75) 2.4 (61)
Voice Coil Kapton®/Aluminum
Magnet weight oz.(g) 45 (1,280) 91 (2,570) 93 (2,640)
Frame Material Die cast aluminum with epoxy finish

Page 299
 Harman
Harman Professional 2015
Catalog 2015
Professional Catalog

6W4P 8W4P

MIDBASS LINE COMPONENTS

LINE

W4P waves.
MIDBASS LINE

• Stamped steel epoxy coated frame is resistant to oxidation and

won’t bend even under harsh conditions.

• Recommended for use in systems that require flat frequency response with

extended range from the midbass to the upper midrange.

• An excellent choice when small unobtrusive speakers are called for in houses

of worship, hotels, schools, clubs, restaurants and retail localizations.

• Durable copper voice coil on Kapton® is large enough to handle a lot of power

but light enough for extended frequency response.

• Special resins are used to treat the long fiber paper cone increasing strength

and improving sound quality.

• Cloth (8”) and foam (6”) half roll surrounds are treated to improve stability

during high excursions, increase acoustic coupling and help dampen standing

SPECIFICATIONS
MODEL 6W4P 8W4P
Diameter 6” 8”
Impedance (Ω) 8 8
RMS (W) 100 150
Musical Program (W) 200 300
SPL 1W @ 1m (dB) 91 96
Frequency Resp. @ -10dB (Hz) 80 to 9,000 100 to 6,500
Kapton® - Trademark Du Pont

Resonance (Hz) 76 107

Voice Coil Diameter in.(mm) 1.3 (32) 1.8 (47)
Voice Coil Kapton®/Copper
Magnet weight oz.(g) 20 (560) 44 (1,240)
Frame Material Stamped steel epoxy finish

Page 300
 Harman
HarmanProfessional Catalog2015
ProfessionalCatalog 2014
2015

12SW600 15SW600 18SW600

WOOFER LINE COMPONENTS

LINE

WS • Composite cellulose cone that is reinforced with long synthetic fibers

MIDBASS LINE
improves mechanical stiffness, damping, and reduces standing waves.

• Efficient vented cooling system reduces power compression and

• Recommended for smaller low frequency cabinets where high power handling, improves efficiency.
seamless linearity and low distortion sound is required.
• High temperature structural adhesives permanently bonds

• Ideal for touring and fixed installations. Recommended for use in sidefill and components increasing durability and reliability.
stage monitor speakers.

• Magnet assembly design optimized by finite element software (FEA) to improve

the control of the flux in the gap.

• Double spiders control the alignment of the cone during high excursions.

• 4” diameter Copper voice coil on a high temperature Kapton® former for

increased power handling and structural durability.

SPECIFICATIONS
MODEL 12WS600 15WS600 18WS600 15WS700
Diameter 12” 15” 18” 15”
Impedance (Ω) 8 8 8 8
RMS (W) 600 600 600 700
Musical Program (W) 1,200 1,200 1,200 1,400
SPL 1W @ 1m (dB) 95 97 98 98
Kapton® - Trademark Du Pont

Frequency Resp. @ -10dB (Hz) 45 to 3,000 40 to 3,500 35 to 3,000 50 to 4,5000

Resonance (Hz) 46 35 33 37
Voice Coil Diameter in. (mm) 4 (100)
Magnet Weight oz.(g) 94 (2,700) 94 (2,700) 94 (2,700) 121.34 (3440)
Frame Material Die cast aluminum with epoxy finish

Page 301
 Harman
Harman Professional 2015
Catalog 2015
Professional Catalog

10CV5 12CV5 15CV5

WOOFER LINE COMPONENTS

LINE

CV5 • Frame in reinforced steel and epoxy paint gives the set high
WOOFER LINE

strength and mechanical structure.

• The aluminum cap ensures a perfect heat dissipation that comes

• Professional woofer, recommended for mid and low frequencies reinforcement and from the voice coil.
designed to meet the most diverse needs, ideal for mobile units or in environments
such as auditoriums, ballrooms and nightclubs. • The use of high strong adhesive guarantees an optimal cohesion
and durability to the components.
• The high efficiency in sound reproduction is due to the excellent combination of its

components.

• The paper cone reinforced with long fibers, provides the array great stability, high

yield and low distortion.

• The voice coil is made of a very resistant to high Temperatures wire and winding in

Kapton former ®.

SPECIFICATIONS
MODEL 10CV5 12CV5 15CV5
Diameter 10” 12” 15”
Power (W) 100 W 150 W 150 W
Musical Program (W) 250 W 350 W 400 W
SPL (dB) 91 dB 1W @ 1m (dB) 97 dB 1W @ 1m (dB) 99 dB 1W @ 1m (dB)
Frequency Resp 65Hz ~ 5500 KHz 70Hz ~ 5000 KHz 70Hz ~ 4000 KHz
Resonance (Hz) 80 Hz 70 Hz 70 Hz
Voice Coil diameter 32 mm 46 mm 46 mm
Magnet Weight (g) 440 g 560 g 920 g
Impedance 8Ω
Die cast Aluminum with epoxy finish

Page 302
 Harman
HarmanProfessional Catalog2015
ProfessionalCatalog 2014
2015

8PW7 15PW6 15PW7

WOOFER LINE COMPONENTS

LINE

PW distortion.

WOOFER LINE
• Aluminum dust cap dissipates heat from the voice coil improving

power handling and reducing power compression. No aluminum dust

cap on (8PW7, 10PW7, 12PW7, and 15PW7).
• Recommended for use in small and medium-size venues where high

performance reproduction of the critical midrange frequencies and low • Mechanically strong and weather resistant epoxy coated stamped

frequencies are desired. steel frame.

• The right choice for two way loudspeakers that are used for sound

reinforcement in auditoriums, ballrooms, nightclubs, and live music stages.

• Precision wound copper voice coil is bonded to a Kapton® former and coated

so that it holds it’s structural shape under high power conditions.

• Paper cone reinforced with long fibers is specially treated to ensure faithful

reproduction and tone in the voice band.

• Accordion edge fabric surround is specially treated to reduce fatigue and lower

SPECIFICATIONS
MODEL 8PW7 10PW7 12PW7 15PW7 15PW6
Diameter 8” 10” 12” 15” 15”
Impedance (Ω) 8 8 8 8 8
RMS (W) 140 150 250 300 400
Musical Program (W) 300 300 500 600 800
SPL 1W @ 1m (dB) 93 95 95 97 97
Frequency Resp. @ -10dB (Hz) 70 to 8,000 60 to 4,000 40 to 4,500 40 to 4,500 60 to 4,000
Resonance (Hz) 79 67 42 43 37
Voice coil Diameter in.(mm) 1.3 (32) 1.8 (46) 2.4 (60) 2.4 (60) 3 (75)
Magnet Weight oz. (g) 20 (560) 32 (920) 46 (1300) 46 (1300) 86 (2440)
Frame Material Stamped steel with epoxy finish

Page 303
 Harman
Harman Professional 2015
Catalog 2015
Professional Catalog

D200 D250-X D305 D405

COMPRESSION DRIVER COMPONENTS

LINE
COMPRESSION DRIVER LINE

PHENOLIC • Magnetic Fluid in the gap (models D305 and D405) helps

center the coil, improves heat dissipation, and reduces distortion.

• Quick change drop in diaphragm for easy repair.

• Recommended for midrange applications in multi-way PA’s, stage monitors, side
fills and high SPL car audio systems.

• High sensitivity, low distortion and smooth response.

• Precisely formed phenolic diaphragm produces high fidelity sound through out the

midrange.

• Diaphragm voice coil is bonded to Kapton™ with high temperature adhesives to

increase durability and raise power handling.

• ”Phase Plug” is an acoustic transformer with optimized geometry to reduce phase

cancellations.

SPECIFICATIONS
MODEL D200 D250-X D305 D405
Throat diameter 1” 2”
impedance (Ω) 8
(1) (2) (2) (2)
RMS (W) 50 100 75 100
Musical Program (W) 100 200 150 200
SPL 1W @ 1m (dB) 107 107 110 110
Frequency Resp. @ -10dB (Hz) 500 to 7.000 400 to 9.000 400 to 9.000 300 to 7.000
Rec. a 12 dB/8ª (Hz) 500 500 500
Voice coil diameter in(mm) 51 51 75 100
Magnet weight oz.(g) 290 332 1.600 2.640
Housing material Plastic Aluminum Plastic
Horn connection Screw on Bolt on

(1) Xover 1.200Hz 12dB/oct (2) Xover 2.000Hz 12dB/oct

Page 304
 Harman
HarmanProfessional Catalog2015
ProfessionalCatalog 2014
2015

D202Ti D220Ti D3305Ti D4400Ti

COMPRESSION DRIVER COMPONENTS

LINE

COMPRESSION DRIVER LINE

TITANIUM • DPD® - Driver Protection Device protection circuit (model D3305Ti),

protects the compression driver by reducing the input power during

clipping and overload conditions.

• Recommended for use in high performance compact, two-way, multi-way and • Precisely designed “Phase Plug” is an acoustic transformer that helps

line array systems. prevent phase cancellations.

• For use in sound reinforcement, side fill and stage monitor loudspeakers. • Copper shorting ring on the pole piece reduces the modulation of the

magnetic field, lowers distortion and increases high frequency output.

• World class drivers with excellent performance.
• Magnetic Fluid in the gap (model D3305Ti) lowers distortion, helps to

• High sensitivity and linear frequency response. center the voice coil and wicks away heat.

• Pure TITANIUM Diaphragm is accurately shaped to produce high frequencies • Repair of the driver is easy because the quick change diaphragm

with clarity. indexes to center and has a unique gold-plated contact system (model
D3305Ti).
• Innovative IPF® - Impregnated Polymer Fiber (model D3305Ti) diaphragm
surround reduces ringing and makes the high frequencies more linear.

SPECIFICATIONS
MODEL D202Ti D220Ti D220Ti OMF D3305Ti DPD D409Ti D405Ti D4400Ti
Throat diameter 1” 2”
Impedance (Ω) 8
RMS (W) 60¹ 80¹ 75² 150 125³ 125³
Musical Program (W) 120 160 150 300 2503 2503
SPL 1W @ 1m (dB) 106 109 108 111 109 112
Frequency Resp. @ -10dB (Hz) 1,000 to 20,000 1,000 to 21,000 500 to 20,000 400 to 20,000 400 to 18,000 400 to 20,000
Rec. X-over, 12dB/oct min. (Hz) 1,500 800 800 800
Kapton® - Trademark Du Pont

Voice coil diameter in (mm) 1.7 (44) 3(75) 4 (100) 4 (100) 4 (100)
Kapton®/CCAW
Voice coil Kapton®/CCAW CCAW Kapton®/CCAW
edgewound
Magnet Weight oz.(g) 8 (210) 24 (675) 57(1,600) 93 (2,640) 93 (2,640) 121.34 (3,440)
Housing material Plastic Aluminum Plastic Aluminum
Horn connection Screw on Bolt on Screw on

(1) Xover 1.200Hz 12dB/oct (2) Xover 2.000Hz 12dB/oct

Page 305
 Harman Professional Catalog 2015
Harman Professional Catalog 2015

SOUND
DISPERSION

HL 4750-SLF

HL 14-25

HL 14-50N

HORN LINE
LONG THROW
HORN LINE

• Ideal for sound reproduction in small, medium and large-size environments.

• Several models available with different sound dispersion designed to fit almost any

application.

• Optimized to increase directivity which raises max SPL, and to improve loading of

the driver which magnifies efficiency.

• Designed to couple with Selenium drivers to produce high clarity sounds.

SPECIFICATIONS
MODEL HL 14-25 HL 14-50N HL 4750-SLF
Throat 1” 2” 2”
Material Plastic Aluminum Fiberglass
Sound Dispersion HxV 45° x 45° 45° x 45° 40° x 20°
Low Frequency Limit. (Hz) 600 600 400
Driver Connection Screw on Bolt on Bolt on
Width in. (mm) 6.1 (156) 6.1 (176) 17.5 (445)
Height in. (mm) 6.1 (156) 6.1 (165) 11 (280)
Length in (mm) 10.1 (258) 5.1 (134) 13.8 (352)

Page 306
 Harman Professional Catalog 2015
Harman Professional Catalog 2015
2014

SOUND
DISPERSION

HM17-25

HM3950-SLF

HM25-25

HORN LINE
MEDIUM AND SHORT THROW

HORN LINE
• Ideal for sound reproduction in small, medium and large-size environments.

• Several models available with different sound dispersion designed to fit almost any

application.

• Optimized to increase directivity which raises max SPL, and to improve loading of

the driver which magnifies efficiency.

• Designed to couple with Selenium drivers to produce high clarity sounds.

SPECIFICATIONS
MODEL HM11-25 HM17-25 HM25-25 HM3950-SLF HM4750-SLF HC2325
Throat 1” 1” 1” 2” 2” 1”
Material Plastic Plastic Aluminum Fiberglass Plastic
Sound Dispersion HxV 60° x 60° 60° x 40° 90° x 60° 60° x 30° 90° x 40° 100° x 40°
Low Frequency Limit (Hz) 1,200 1,500 1,200 400 400 600
Driver Connection Screw on Screw on Screw on Bolt on Bolt on Screw on
Width in (mm) 4.5 (115) 6.3 (160) 10.8 (274) 15.3 (390) 17.5 (445) 10 (254)
Height in (mm) 4.5 (115) 5.7 (145) 6.5 (164) 8.1 (206) 11.4 (290) 5 (128)
Length in (mm) 3 (75) 4.1 (103) 5.9 (151) 9.2 (234) 8.3 (210) 5.7 (145)

Page 307
 Harman Professional
Harman ProfessionalCatalog 2015
Catalog2015

SOUND
DISPERSION

ST350 ST400BLK ST304

SUPER TWEETER LINE COMPONENTS

LINE

ST • The Phenolic diaphragms ability to hold it’s shape is key to

SUPERTWEETER LINE

the production of high fidelity, high frequency sound.

• Durability of the super tweeter is increased by using a high

• Ideal super tweeter when the reproduction of high frequencies must define the temperature voice coil that’s bonded to a Kapton® former.
instruments.
• Components are bonded with high temperature structural

• Recommended for PA systems, stage monitors and most sound reinforcement adhesives to increase durability and improve reliability.
systems in general.
• Easy diaphragm replacement for faster repairs.
• Extremely high sensitivity and lower distortion.

• The geometry of the magnetic circuit was optimized with Finite Element Analysis

(FEA) in order to efficiently utilize and distribute the magnetic field in the gap.

SPECIFICATIONS
MODEL ST200 ST304 ST350 ST400 BLK ST302-X
Impedance (Ω) 8 8 8 8 8
RMS (W) 70(1) 40(2) 100(2) 150(2) 125(2)
Musical Program (W) 140 80 100(2) 150(2) 250
SPL 1W @ 1m (dB) 105 106 111 111 106
Frequency Resp. @ -10dB (Hz) 2,000 to 20,000 3,500 to 18,000 2,500 to 20,000 3,000 to 20,000 3,500 to 20,000
Voice Coil Diameter 1.8 (46) 1.7 (42) 1.8 (46)
Sound Dispersion HxV 40° x 40° 120° x 40° 40° x 40°
Magnet weight 8 (220) 11 (320) 17 (470) 15 (430) 440
Diaphragm Phenolic
Housing material Plastic

Page 308