Scribd
Upload
24 views1 page

How To Set Parameters For Viewing SART

The document describes the main menu tree of a radar system. It provides an overview table outlining the main menu options, including back, second echo rejection, tune initialize, performance monitor, SART, wiper, echo area, and notes an option is unavailable on specific radar types.

Uploaded by

pronav2024
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
24 views1 page

How To Set Parameters For Viewing SART

The document describes the main menu tree of a radar system. It provides an overview table outlining the main menu options, including back, second echo rejection, tune initialize, performance monitor, SART, wiper, echo area, and notes an option is unavailable on specific radar types.

Uploaded by

pronav2024
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

3.

3 Main Menu Tree

3.3 Main Menu Tree


3.3.1 Overview
Table 3.3.1 Overview of Main menu tree

MAIN menu Submenu Description


1 BACK
In certain situations, echoes from great distance targets
may appear as false echoes (second-trace echoes) on the
2 2ND ECHO REJ screen. This occurs when the return echo is received one
TX interval later, or after the next radar pulse has been
transmitted.
TUNE INITIALIZE is executed by respective
3 TUNE INITIALIZE
pulse-lengths, and saves tuned value.
Retrieve from the conditions set in [Menu] -> 0 -> 4 -> 0:
PM GAIN ADJ and checks the degradation of radar TX
and receiving gain. After the checking is complete, change
the range or turn this function off.
Automatic setting value:
24 NM/Long pulse/STC: Manual =0/FTC: 0/
AUTO FTC: OFF/ECHO STRETCH: OFF/
4 PM ECHO AVERAGE: OFF/TUNE: AUTO/
BRIND SECTOR: OFF/ IR: 2
GAIN: PM GAIN ADJ value
1 ECHO GAIN VR Enabled/FTC VR Disabled/STC VR Disabled
NOTE: On the SPU Ver. 50.08, 02.40 and after, when
setting “50 or 60 ” in the MODEL, “4. PM” display is
deleted.
Allows an optimum setting for viewing the SART signals.
After the checking is complete, change the range or turn
this function off.
Automatic setting value:
5 SART
12 NM/Long pulse/PM OFF/ECHO STRETCH: OFF/
ECHO AVERAGE: OFF/AUTO FTC OFF/
TUNE: AUTO/BRIND SECTOR: OFF/IR: OFF
GAIN VR Enabled/FTC VR Disabled/STC VR Disabled
The wiper feature automatically changes intensity
brilliance of weak signals to facilitate picture observation,
6 WIPER
and its affect depends on the wiper setting used and
whether each averaging is turned on or off.
Allows the setting display area for the radar echo, e.g.
7 ECHO AREA “CIRCLE, WIDE and ALL”.
Not available on IMO and A type radars.

3-25

You might also like