HPE ProLiant DL320 Gen11-A50004315enw

QuickSpecs HPE ProLiant DL320 Gen11
Overview
HPE ProLiant DL320 Gen11

Are you looking to run edge AI workloads like Computer Vision that need GPU accelerators or distributed data solutions that
require expandable storage? The HPE ProLiant DL320 Gen11 is a 1U 1P server with a unique compact and workload-driven
modular design that is purpose-built for edge computing delivering exceptional performance at 1P economics and an excellent
choice for both virtualized and containerized workloads.
Powered by 4th and 5th Gen Intel® Xeon® Scalable Processors with up to 60 cores and 270W, increased memory capability (up to 2
TB 5200 MT/s), and high-speed PCIe Gen5 supporting up to four single-wide GPUs (or two double-wide), the HPE ProLiant
DL320 Gen11 server is a perfect low-cost, 1U 1P, performance solution. The HPE ProLiant Gen11 servers are engineered to
optimize IT at the edge with a cloud operating experience, built-in security, and optimized performance for workloads to drive your
business forward.
4 LFF Front View --- 4 LFF + optional Optical Drive and SAS drives shown
1. Optical Drive (optional - shown) 7. Power On / Standby button and system power LED
2. Serial number/iLO information pull tab 8. Health LED
3. Quick removal access panel 9. NIC Status
4. Option Display Port & USB 2.0 port bundle kit (blank 10. Unit ID Button/LED
shown) 11. SAS/SATA drive bays
5. USB 3.2 Gen1 port 12 Drive support label
6. iLO Service Port
Page 1
Overview
8SFF Front View - 8 SFF + optional Universal Media Bay, optical Drive, Display Port, USB2.0, and SATA Drive shown
1. Quick removal access panel 9. Health LED
2. Serial number/iLO information pull tab 10. NIC Status
3. Display Port (optional – shown) 11. Unit ID Button/LED
4. Universal Media Bay (optional): 12. USB 3.2 Gen1 port
• Option1: Optical drive bay + Display port & USB 2.0 port kit 13. Drive bays; backplanes options
(shown) • Option1: 8SFF x1 Tri-Mode 24G U.3 BC
• Option2: 2 SFF x4 Tri-Mode 24G U.3 BC Drive Cage Backplane
5. USB 3.2 Gen1 port (optional – shown) • Option2: 8SFF x4 Tri-Mode 24G U.3 BC
6. Optical Drive (optional– shown) Backplane
7. iLO Service Port 14. Drive support label
8. Power On / Standby button and system power LED
12 LFF Front View - 12 LFF + SAS drives shown
1. Serial number/iLO information pull tab 6. NIC Status

2. USB 3.2 Gen1 Port 7. Unit ID Button/LED
3. iLO Service Port 8. SAS/SATA drive bays
4. Power On/Standby button and system power LED 9. Drive support label
5. Health LED
Page 2
Overview
Front View – GPU CTO Server

1. Drive Bays 6. Power On/Standby button and system power LED
• Option1: 4SFF SAS/SATA/NVMe (Shown) 7. Health LED
• Option2: 8EDSFF E3.s 1T 8. NIC Status
2. Serial number/iLO information pull tab 9. Unit ID Button/LED
3. Quick removal access panel 10. USB 3.2 Gen1 Port
4. GPU Front Cage 11. Drive support label
5. iLO Service Port
Internal View – Standard for all DL320 Gen11

1. Up to 7 Hot Plug Fans 5. Slot-2 PCIe5 x16 FHHL (Secondary Riser)
2. Two (2) M.2 module connectors (under the air baffle- not 6. Slot-1 PCIe5 x16 FHHL (Primary Riser)
visible) 7. 16 DDR5 DIMM slots (shown)
3. Redundant Power Supply (1 & 2 as shown) 8. Heat Sink
4. HPE NS204i-u NVMe Hot Plug Boot Optimized Storage 9. Drive Cage
Device (optional – shown)
Notes: 1x Internal USB 3.0 port is not marked.
Page 3
Overview
Rear View – Standard for all DL320 Gen11

1. Slot-1 & 2 PCIe5 x16 FHHL (Primary and Secondary Riser) 6. UID Indicator LED
2. HPE NS204i-u NVMe Hot Plug Boot Optimized Storage 7. Two (2) USB 3.2 Gen1 ports
Device (optional – shown)
3. Hot-plug Power Supply 1 and 2 (1 +1 Redundancy) 8. Dedicated iLO management port
4, OCP 3.0 Slot: x16 PCIe 5.0 9. Embedded 1GbE x2 network port
5. Video (VGA) port 10. Serial port (optional)
Platform Information
Form Factor
• 1U rack
Chassis Types
• 4 LFF (P52765-B21) with optional Optical Disk Drive (use cable P54641-B21), optional Display Port/USB Kit (P48928-
B21)
• 8+2 SFF SAS/SATA/NVMe (P52766-B21)
− Option1: HPE ProLiant DL320 Gen11 8SFF x1 Tri-Mode 24G U.3 BC Backplane Kit (P52743-B21)
− Option2: HPE ProLiant DL320 Gen11 8SFF x4 Tri-Mode 24G U.3 BC Backplane Kit (P52747-B21)
• 12 LFF (P52767-B21)
• GPU Dense (P61218-B21)
− Option1: HPE ProLiant DL320 Gen11 8EDSFF x4 NVMe Drive Cage Kit (P61219-B21)
− Option2: HPE ProLiant DL320 Gen11 4SFF x4 Tri-Mode 24G U.3 BC Drive Cage Kit (P61221-B21)
System Fans
• HPE ProLiant DL3X0 Gen11 1U Standard Fan Kit (P48907-B21), includes five fans.
• HPE ProLiant DL3X0 Gen11 1U High Performance Fan Kit (P48908-B21), includes seven fans.
• HPE ProLiant DL3X0 Gen11 1U 2P Standard Fan Kit (P54697-B21), includes two fans.
Notes: Generally, the High-Performance fan kit is required when >185W Processors SKUs, High-Performance NVMe drives, or
certain backplanes are populated. See notes under each option category or each individual option for specifics.
Page 4
Standard Features
Processors – One of the following.

The 2nd digit of the processor model number "x4xx" is used to denote the processor generation (i.e., 4=4th generation Intel
Scalable Series Processors)
For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.
This table covers the public Intel offering only.
Processor Suffix Description Offering

H DB and Analytics Highest core counts. Database and Analytics usages benefit from
DSA and IAA accelerators.
M Media Transcode Optimized around AVX frequencies to deliver better

performance/watt around Media, AI, and HPC workloads.
N Network/5G/Edge (High Designed for NFV and networking workloads, such as L3 forwarding,
TPT / Low Latency) 5G UPF, OVS DPDK, VPP FIB router, VPP IPsec, web server/NGINX,
vEPC, vBNG, and vCMTS.
S Storage and HCI Optimized for Storage UMA use cases with increased UPI Bandwidth
for vs. Mainline SKUs.
P Cloud - IAAS Designed for cloud IaaS environments to deliver higher frequencies
at constrained TDPs.
Q Liquid Cooling Liquid-cooled processors with higher frequency and performance at
the same TDP.
U 1 Socket Optimized Optimized for targeted platforms adequately served by the cores,
memory bandwidth, and IO capacity available from a single
processor.
V Cloud - SAAS Optimized for orchestration efficiency that delivers higher core
counts and VMs per rack.
Y Speed Select Intel® SST-PP increases the base frequency when fewer cores are
enabled. Allows greater flexibility, deployment options, and platform
longevity.
Notes:
− Covers the Intel public offering only.
− New Built-in Accelerators.
− 1 to 8 socket support
− Intel® Data Streaming Accelerator (DSA)
− Intel® Dynamic Load Balancer (DLB)
− Intel® Quick Assist Technology (QAT)
− Intel® In-Memory Analytics Accelerator (IAA)
− Increased memory bandwidth with 8 channels DDR5, up to 4800 MT/s, 4.0TB maximum RAM per socket.
− Increased I/O bandwidth up to 80 PCIe 5.0 lanes per socket, and new Compute Express Link (CXL).
− Built-in AI Acceleration: Intel® Advanced Matrix Extension (AMX)
− Hardware-enhanced Security: Enhanced Intel® Software Guard Extensions (SGX) – with new cryptographic memory
integrity
− Increaed Multi-Socket Bandwidth with new UPI2.0 (up to 16GT/s) with maximum 4 UPI Links
− New FlexBus I/O Interface PCIe5.0 + CXL
− 1 The 4th Generation Intel® Xeon® Scalable Processors are featured with Intel Speed Select Technology (SST) for
Infrastructure as as Service, Networking and Virtualized environments worklaods. The SST includes,
− SST- Performace Profile
− SST- Base Frequency
Page 5
Standard Features
− SST- Core Power

− SST- Turo Frequency
− Default setting in ROM-Based Setp Utility (RBSU) as shown.
Intel® SST Features RBSU Options Granular Control over CPU Performance Default Setting
SST- Performance Profile Dynamic Intel® Speed Alllows the CPU to run in one of three CPU hardware-
Select Technology – performance profiles based. Enabled by
Performance Profile default
SST-Base Frequency Intel® Speed Select Enables some CPU cores to run at a higher Disabled by default
Technology – Base base frequency in return for other cores
Frequency running at a lower base frequency
SST-Core Power Intel® Speed Select Allows software to prioritize with cores will Disabled by default
Technology – Core Power receive excess power after satisfying
minimum requirements
Intel SST Turbo Frequency Intel® Turbo Boost Allows software-selected cores to achieve a Enabled by default
Technology higher max turbo frequency by reducing
other cores’ max turbo frequency
5th Generation Intel® Xeon® Scalable Processor Family (Platinum)

Intel Xeon Models Base Speed Cores L3 Cache Power UPI DDR5 SGX Enclave Die
Links Size
Platinum 8581V Processor 2.0 GHz 60 300 MB 270 W 0 4800 (MT/s) 128 GB XCC
Notes:
− Processors with TDP greater than 185W require High Performance Heatsink (P52756-B21) and High-Performance Fan
Kit (P48908-B21).
− Intel® Speed Select enabled processors: 8581V.
5th Generation Intel® Xeon® Scalable Processor Family (Gold 6 )

Links Size
Gold 6526Y Processor 2.8 GHz 16 37.5 MB 195W 3 5200 MT/s 128 GB
MCC
Gold 6530 Processor 2.1 GHz 32 160 MB 270W 3 4800 MT/s 128 GB
XCC
Gold 6534 Processor 3.9 GHz 8 22.5 MB 195W 3 4800 MT/s 128 GB
MCC
Gold 6538N Processor 2.1 GHz 32 60.0 MB 205W 3 5200 MT/s 128 GB
MCC
Gold 6538Y+ Processor 2.2 GHz 32 60.0 MB 225W 3 5200 MT/s 128 GB
MCC
MCC
MCC
Gold 6548N Processor 2.8 GHz 32 60.0 MB 250W 3 5200 MT/s 128 GB
MCC
Gold 6548Y+ Processor 2.5 GHz 32 60.0 MB 250W 3 5200 MT/s 128 GB
MCC
Gold 6554S Processor 2.2 GHz 36 180 MB 270W 4 5200 MT/s 128 GB
XCC
Notes:
− Processors with a TDP greater than 185W require High Performance Heatsink (P52756-B21) and High-Performance Fan
Kit (P48908-B21).
− Intel® Speed Select enabled processors: 6526Y, 6538N, 6538Y+, 6542Y, 6544Y, 6548N, 6548Y+ and 6554S.
5th Generation Intel® Xeon® Scalable Processor Family (Gold 5 )

Links Size
Gold 5512U Processor 2.1 GHz 28 52.5 MB 185 W 0 4800 MT/s 128 GB MCC
Gold 5515+ Processor 3.2 GHz 8 22.5 MB 165 W 3 4800 MT/s 128 GB MCC
Gold 5520+ Processor 2.2 GHz 28 52. 5 MB 205 W 3 4800 MT/s 128 GB MCC
Page 6
Standard Features
Notes:
Kit (P48908-B21).
− Intel® Speed Select enabled processors: NA.
5th Generation Intel® Xeon® Scalable Processor Family (Silver)

Links Size
Silver 4509Y Processor 2.6 GHz 8 22.5 MB 125W 2 4400 MT/s 64 GB EE LCC
Silver 4510 Processor 2.4 GHz 12 30.0 MB 150W 2 4000 MT/s 64 GB EE LCC
Silver 4514Y Processor 2.0 GHz 16 30.0 MB 150W 2 4400 MT/s 64 GB MCC
Silver 4516Y+ Processor 2.2 GHz 24 45.0 MB 185W 2 4400 MT/s 64 GB MCC
Notes:
− Intel® Speed Select enabled processors: 4509Y, 4514Y and 4516Y+.
5th Generation Intel® Xeon® Scalable Processor Family (Bronze)

Links Size
Bronze 3508U Processor1 2.1 GHz 8 22.5 MB 125W N/A 4400 MT/s 64 GB EE LCC
Notes:
− Intel® Speed Select enabled processors: N.A.
− PCIe4.0 only
4th Generation Intel® Xeon® Scalable Processor Family (Gold)

Links Size
Gold 6426Y Processor 2.5 GHz 16 37.5 MB 185 W 3 4800 MT/s 128 GB MCC
Gold 6442Y Processor 2.6 GHz 24 60 MB 225 W 3 4800 MT/s 128 GB MCC
Gold 6434 Processor 3.7 GHz 8 22.5 MB 195 W 3 4800 MT/s 128 GB MCC
Gold 6430 Processor 2.1 GHz 32 60 MB 270 W 3 4800 MT/s 128 GB XCC
Gold 6438Y+ Processor 2.0 GHz 32 60 MB 205 W 3 4800 MT/s 128 GB MCC
Gold 6414U Processor 2.0 GHz 32 60 MB 250 W 0 4800 MT/s 128 GB XCC
Gold 6438N Processor 2.0 GHz 32 60 MB 205 W 3 4800 MT/s 128 GB MCC
Gold 6454S Processor 2.2 GHz 32 60 MB 270 W 4 4800 MT/s 128 GB XCC
Gold 5412U Processor 2.1 GHz 24 45 MB 185 W 0 4400 MT/s 128 GB MCC
Gold 5416S Processor 2.0 GHz 16 30 MB 150 W 3 4400 MT/s 128 GB MCC
Notes:
Kit (P48908-B21).
− 96 GB 4800 MT/s Memory cannot be selected if HBM or MCC die
Page 7
Standard Features
4th Generation Intel® Xeon® Scalable Processor Family (Silver)

Links Size
Silver 4410Y Processor 2.0 GHz 12 30 MB 150 W 2 4000 MT/s 128 GB MCC
Silver 4416+ Processor 2.0 GHz 20 37.5 MB 165 W 2 4000 MT/s 128 GB MCC
Notes: 96 GB 4800 MT/s Memory cannot be selected if HBM or MCC die

4th Generation Intel® Xeon® Scalable Processor Family (Bronze)
Links Size
Bronze 3408U Processor 1.8 GHz 8 22.5 MB 125 W 0 4000 MT/s 64 GB MCC
Notes: 96 GB 4800 MT/s Memory cannot be selected if HBM or MCC die
Chipset
Intel C741 Chipset
Notes: For more information regarding Intel® chipsets, please see the following URL:
https://www.intel.com/content/www/us/en/products/chipsets/server-chipsets.html
System Management Chipset
HPE iLO 6 ASIC
Notes: Read and learn more in the iLO QuickSpecs.
Memory
Type HPE DDR5 Smart Memory
Registered (RDIMM)
DIMM Slots Available 16 DIMM Slots, 8 channels, 2 DIMMs per channel
Maximum capacity (RDIMM) 2.04 TB
16 x 128 GB RDIMM @ 4800 MT/s
Notes:
All processors support up to 2TB memory.
− The maximum memory speed is limited by the processor selection.
− To realize the performance memory capabilities listed in this document, HPE DDR5 Smart Memory is required.
− For additional information, please visit the HPE Memory QuickSpecs and Technical White Papers or HPE DDR5 Smart
Memory QuickSpecs.
Memory Protection
Advanced ECC
Advanced ECC uses -device data correction to detect and correct single and all multibit errors within a single DRAM chip.
Online Spare
Memory online spare mode detects a degrading rank and switches operation to the spare rank.
Notes: For more information, see our Memory RAS feature technical whitepaper.
Page 8
Standard Features
Network Controller
The HPE ProLiant DL320 Gen11 server offers the customer Embedded Broadcom BCM5720 Ethernet 1Gb 2-port BASE-T
Adapter standard with the option to upgrade with a variety of networking options.
Notes: Support document and downloads including firmware and drivers for the Broadcom BCM5720 Ethernet 1Gb 2-port
BASET LOM Adapter can be downloaded from the supplier’s support and services webpage.
PCIe Expansion Slots

Expansion Slots # Technology Bus Width Connector Width Slot Form Factor
1 (Primary Riser) PCIe 5.0 x16 x16 FHHL
2 (Secondary Riser) PCIe 5.0 x16 x16 FHHL
Notes: Slot-1, by default, is with the riser.
OCP Expansion Slots
Expansion Slots # Technology Bus Width Connector Width
1 (OCP 3.0) with Wake on LAN
(WoL) and iLO sideband (shared PCIe 5.0 x16 x16
NIC) capability
Internal Storage Devices
• Optical Drive
Available on 8 SFF and 4 LFF CTO Servers as an option (DVD-ROM or DVD-RW)
• Hard Drives
None shipped standard
Graphics
Integrated Video Standard
• Video modes up to 1920 x 1200@60Hz (32 bpp)
• 16MB Video Memory
Page 9
Standard Features
Maximum Storage
Storage Capacity Configuration
Hot Plug LFF SAS HDD 80.0 TB (4 x 20 TB) HPE ProLiant DL320 Gen11 4 LFF CTO Server
Hot Plug LFF SATA HDD 80.0 TB (4 x 20 TB) (P52765-B21)
Hot Plug LFF SAS SSD 30.72 TB (4 x 7.68 TB)
Hot Plug LFF SATA SSD 30.72 TB (4 x 7.68 GB)
Hot Plug SFF SAS HDD 24.0 TB (8+2 x 2.4 TB) HPE ProLiant DL320 Gen11 8 SFF CTO Server with
Hot Plug SFF SATA HDD 20.0 TB (8+2 x 2.0 TB) optional 2 SFF cage on UMB (P52766-B21)
Hot Plug SFF SAS SSD 153.0 TB (8+2 x 15.3 TB)
Hot Plug SFF SATA SSD 76.8 TB (8+2 x 7.68 TB)
Hot Plug LFF SAS HDD 240.0 TB (12 x 20 TB) HPE ProLiant DL320 Gen11 12 LFF CTO Server
Hot Plug LFF SATA HDD 240.0 TB (12 x 20 TB) (P52767-B21)
Hot Plug LFF SAS SSD 92.16 TB (12 x 7.68 TB)
Hot Plug LFF SATA SSD 92.16 TB (12 x 7.68 GB)
EDSFF NVMe SSD 61.44 TB (4 x 15.36) HPE DL320 Gen11 GPU CTO Server (P61218-B21)
with 8EDSFF Drive Cage (P61219-B21)
Hot Plug SFF SAS HDD 9.6 TB (4 x 2.4 TB) HPE DL320 Gen11 GPU CTO Server (P61218-B21) with
Hot Plug SFF SATA HDD 8.0 TB (4 x 2.0 TB) 4SFF Drive Cage (P61221-B21)
Hot Plug SFF SAS SSD 61.2 TB (4 x 15.3 TB)
Hot Plug SFF SATA SSD 30.72 TB (4 x 7.68 TB)
Hot Plug SFF NVMe PCIe SSD 153.6 TB (8+2 x 15.36 TB)
M.2 NVMe SSD 3.84 GB (2 x 1.92 GB)
On board with any of the available configurations
M.2 SATA SSD 960 GB (2x 480 GB)
Storage Controllers
NVMe Boot Devices
• HPE NS204i-u NVMe Hot Plug Boot Optimized Storage Device (P48183-B21)
• HPE ProLiant DL320 Gen11 NS204i-u NVMe Boot Kit (P52786-B21)
Notes: N204i-u Boot device includes 2x 480GB M.2 NVMe SSDs, with preconfigured hardware RAID1. For additional
information, please see the HPE OS Boot Device QuickSpecs
Software RAID Controllers

The available Gen11 controllers are depicted below.
Intel® VROC SATA for HPE ProLiant Gen11
Notes:
Embedded Intel® VROC SATA for HPE ProLiant Gen11, with 14 SATA ports (10-ports accessible),
Intel® VROC for HPE ProLiant Gen11 is an enterprise, hybrid Software RAID solution specifically designed for
SSDs.
Intel® VROC is a software-based solution utilizing Intel® CPU to RAID or HBA direct connected drives.
RAID Support- 0/1/5/10.
Windows and Linux OS support.
Host Tools- Windows GUI/CLI, Linux CLI.
UEFI Support- HII Utility, OBSE.
iLO Support- IML, Alert, SNMP, AHS.
iLO Redfish- Redfish Read.
Intel® VROC SATA for HPE ProLiant Gen11 will operate in UEFI mode only. For legacy support additional
storage controller will be needed.
Intel® VROC SATA is off by default and must be enabled.
8SFF: Separates 8SFF to two drive groups (BOX1 Bay1-4 and Bay5-8) with Intel VROC SATA RAID configuration.
Page 10
Standard Features
2SFF: 2SFF (BOX2 Bay1 and Bay-2) is one drive group with Intel VROC SATA RAID configuration.
4LFF: 4LFF (BOX1 Bay1-4) is a one drive group with Intel VROC SATA RAID configuration.
10LFF: Each LFF BOX cage is separated drive groups (BOX1, BOX3 & BOX5) with Intel VROC SATA RAID
configuration.
Intel® VROC NVMe for HPE ProLiant Gen11

Intel® Virtual RAID on CPU (Intel® VROC) Premium FIO Software for HPE
Intel® Virtual RAID on CPU (Intel® VROC) Standard Software FIO for HPE
In HPE ProLiant Gen11 servers, when secure boot is enabled, Intel Virtual RAID on CPU (VROC) 8.0 Out-of-Band (OOB)
management does not function with Linux kernel version 5.4 (or later). VROC OOB will not respond to any PLDM (over-MCTP-
over-PCIe) requests from iLO (BMC). VROC Redfish resources will not function (e.g., Redfish actions); therefore, VROC over Redfish
management is not available. This is due to a new security feature in Linux kernel version 5.4 (or later).
For more information, please visit Customer Advisory Document ID: a00128934en_us at HPE Support Center.
Notes:
All models feature 4 x8 PCIe 5.0 connectors per socket for NVMe connectivity, provides support for up to 8 direct
attach x4 NVMe bays.
Only supported on SFF models.
Intel® VROC for HPE ProLiant Gen11 is an enterprise, hybrid Software RAID solution specifically.
designed for NVMe SSDs connected directly to the CPU. Intel® VROC is a software-based solution.
utilizing Intel® CPU to RAID or HBA direct connected drives.
Intel® Virtual RAID on CPU Standard for RAID 0/1/10 (S0E37A/S0E38AAE) or Premium SKU for RAID 0/1/5/10
(R7J57A/R7J59AAE) must be ordered to enable RAID support.
Windows, Linux, VMware OS support.
Host Tools- Windows GUI/CLI, Linux CLI.
UEFI Support- HII Utility, OBSE.
Active health monitoring of NVMe M.2 drives requires use of SMART tools.
Intel® VROC NVMe for HPE ProLiant Gen11 will operate in UEFI mode only. For legacy support an additional Tri-
Mode controller will be needed.
For NVMe SSDs only, no PCIe card support.
Intel VROC for HPE ProLiant QuickSpecs
Essential RAID Controllers

• HPE Smart Array E208e-p SR Gen10 Controller
Performance RAID Controllers
• HPE MR216i-p Gen11 x16 Lanes without Cache PCI SPDM Plug-in Storage Controller
• HPE MR216i-o Gen11 x16 Lanes without Cache OCP SPDM Storage Controller
• HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller
• HPE MR416i-o Gen11 x16 Lanes 8GB Cache OCP SPDM Storage Controller
• HPE MR416i-p Gen11 x16 Lanes 8GB Cache PCI SPDM Plug-in Storage Controller
• HPE SR932i-p Gen11 x32 Lanes 8GB Wide Cache PCI SPDM Plug-in Storage Controller.1,2
Notes:
1Requires x16 physical and electrical riser slot.
2If second controller is required, must select secondary FH riser. For additional details, please see:
HPE Compute MR Gen11 Controllers QuickSpecs
HPE Compute SR Gen11 Controllers QuickSpecs
Power Supply
• HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Notes: Available with 94% efficiency.
Page 11
Standard Features
• HPE 1000W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit
Notes:
Available with 94% efficiency.
1600W Power supplies only support high line voltage (200 VAC to 240 VAC).
• HPE 1800-2000W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less
installation into HPE ProLiant Gen11 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and
offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility
helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included
with each standard AC power supply option kit. Please check the ProLiant Power Cables web page if a different power cord is
required.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.
For information on power specifications and technical content, visit HPE Server power supplies.
European Union Erp Lot 9 Regulation
Beginning on January 1st, 2024, units sold into the European Union (EU), European Economic Area (EEA), the United Kingdom, or
Switzerland must include more efficient AC power supplies: 94% for multi-output and 96% for single-output. HPE Flexible Slot
power supplies are single-output, and part numbers 865438-B21, P03178-B21, and P44712-B21 are 96% efficient, thus meeting
requirements.
HPE is on target to fulfil compliant systems ahead of time and will begin enforcing these requirements in advance to satisfy
requests with the current power supplies by the set deadline.
Interfaces
Serial 1 port - Optional
Video 1 Front - Display port (optional)
1 Rear - VGA port (standard on all models)
Notes: If both ports are used simultaneously, they will display the same image.
Network Ports None. Choice of OCP or standup card, supporting a wide arrange of NIC adapters
HPE iLO Remote Mgmt Port 1 GbE Dedicated
Front iLO Service Port 1 standard
USB 4 standard on all models: 1 front(USB 3.2 Gen1), 2 rear (USB 3.2 Gen1), 1 internal (USB
2.0)
+1 optional USB 2.0 front in 4LFF & 8SFF
Notes: USB 3.2 Gen1 is referred to as USB 3.0 in some marketing documents.
Page 12
Standard Features
Operating Systems and Virtualization Software

See HPE Servers Support & Certification Matrices
• Microsoft Windows Server
• VMware ESXi
• Red Hat Enterprise Linux (RHEL)
• SUSE Linux Enterprise Server (SLES)
• Canonical Ubuntu
• Oracle Linux and Oracle VM
• Citrix
• Community Enterprise Linux (CentOS, Alma Linux, Rocky Linux)
HPE Server UEFI/Legacy ROM

Unified Extensible Firmware Interface (UEFI) is an industry-standard that provides better manageability and more secured
configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen11 servers have a UEFI Class
3 implementation to support UEFI Mode.
Notes: The UEFI System Utilities tool is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more
information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers, such as:
• Secure Boot and Secure Start enabled for enhanced security.
• Embedded UEFI Shell
• Operating system-specific functionality
• Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant
• Support for > 2.2 TB (using GPT) boot drives.
• PXE boot support for IPv6 networks
• USB 3.0 Stack
• Workload Profiles for simple performance optimization
UEFI Boot Mode only:
• TPM 2.0 Support
• iSCSI Software Initiator Support.
• NVMe Boot Support
• HTTP/HTTPs Boot support as a PXE alternative.
• Platform Trust Technology (PTT) can be enabled.
• Boot support for option cards that only support a UEFI option ROM.
Notes:
Enabling TPM 2.0 no longer requires TPM module option kit for Gen11. It is an embedded feature.
TPM is disabled on shipments to China.
For UEFI Boot Mode, the boot environment and OS image installations should be configured properly to support
UEFI.
Page 13
Standard Features
Industry Standard Compliance

• ACPI 6.3 Compliant
• PCIe 5.0 Compliant
• Wake on LAN (WoL) Support
• Microsoft® Logo certifications
• PXE Support
• VGA
• Display Port
Notes: This support is on the optional Universal Media Bay.
• USB 3.2 Gen1 Compliant
• USB 2.0 Compliant (via Universal Media Bay)
Notes: This support is on the optional Universal Media Bay.
• Energy Star 4.0
• SMBIOS 3.2
• Redfish API
• IPMI 2.0
• Secure Digital 4.0
• Embedded TPM 2.0 Support
Notes: Enabling TPM 2.0 no longer requires TPM module option kit for Gen11 since it is an embedded feature. TPM is
disabled on shipments to China.
• Advanced Encryption Standard (AES)
• Triple Data Encryption Standard (3DES)
• SNMP v3
• TLS 1.2
• DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
• Active Directory v1.0
• ASHRAE A3/A4
Notes: For additional technical and thermal details regarding ambient temperature, humidity, and feature support,
please visit https://www.hpe.com/support/ASHRAEGen11
• UEFI (Unified Extensible Firmware Interface Forum) 2.7
Embedded Management
HPE Integrated Lights-Out (HPE iLO)
Monitor your servers for ongoing management, service alerting, reporting, and remote management with HPE iLO.
Learn more at http://www.hpe.com/info/ilo.
UEFI
Configure and boot your servers securely with industry-standard Unified Extensible Firmware Interface (UEFI).
Learn more at http://www.hpe.com/servers/uefi.
Page 14
Standard Features
Intelligent Provisioning
Hassle-free server and OS provisioning for one or more servers with Intelligent Provisioning.
Learn more at http://www.hpe.com/servers/intelligentprovisioning.
iLO RESTful API

iLO RESTful API is Redfish API conformance and offers simplified server management automation, such as configuration and
maintenance tasks based on modern industry standards. Learn more at http://www.hpe.com/info/restfulapi.
OpenBMC Support
OpenBMC Capable through iLO6 Transfer of Ownership Process.
Learn more at OpenBMC Support
Server Utilities
Active Health System
The HPE Active Health System (AHS) is an essential component of the iLO management portfolio that provides continuous,
proactive health monitoring of HPE servers. Learn more at http://www.hpe.com/servers/ahs.
Active Health System Viewer

The Active System Health Viewer (AHSV) is deprecated as of March 2022. Users are now recommended to use the InfoSight for
Servers Portal for AHS viewing capabilities. In InfoSight for Servers portal, users will also be able to view hardware configuration
details, firmware and driver information, warranty and support status of a server, wellness alerts, and create support cases for
servers under a valid warranty or support contract.
HPE InfoSight provides the same security assurances as AHSV. Furthermore, InfoSight can be used as an AHSV
replacement even if customers do not want to share AHSV logs and telemetry data on an ongoing basis
Smart Update
Keep your servers up to date with the HPE Smart Update solution by using Smart Update Manager (SUM) to optimize the
firmware and driver updates of the Service Pack for ProLiant (SPP).
Learn more at https://www.hpe.com/us/en/servers/smart-update.html.
iLO Amplifier Pack

Designed for large enterprise and service provider environments with hundreds of HPE servers, the iLO Amplifier Pack is a free,
downloadable open virtual application (OVA) that delivers the power to discover, inventory, and update Gen8, Gen9, Gen10, and
Gen10 Plus HPE servers at unmatched speed and scale. Use an iLO Advanced License to unlock full capabilities.
Learn more at http://www.hpe.com/servers/iLOamplifierpack.
RESTful Interface Tool

RESTful Interface tool (iLOREST) is a single scripting tool to provision using iLO RESTful API to discover and deploy servers at
scale. Learn more at http://www.hpe.com/info/resttool.
Scripting Tools
Provision one too many servers, using your scripts to discover and deploy with Scripting Tool (STK) for Windows and Linux or
Scripting Tools for Windows PowerShell. Learn more at http://www.hpe.com/servers/powershell.
HPE OneView Standard

HPE OneView is an on-premise, multi-generational server monitoring and management solution. HPE OneView Standard can be
used for inventory, health monitoring, alerting, and reporting without additional fees. Customers can upgrade their management
experience with an HPE OneView Advanced license, all provided by the same tool. Learn more at
http://www.hpe.com/info/oneview.
Page 15
Standard Features
HPE GreenLake for Compute Ops Management

HPE is intelligently transforming compute management with an intuitive cloud operating experience through HPE GreenLake
cloud platform to streamline and secure operations from edge-to-cloud. Automated key lifecycle tasks, for onboarding, updating,
managing, and monitoring HPE servers, brings agility and greater efficiencies to wherever compute devices reside via a unified
single browser-based interface. Manage single locations or multiple, distributed sites. Keep tens to thousands of servers secure
with batch policy controls and automated updates.
Compute Ops Management is cloud-native software that is continually updated with new services, features, patches, and fixes. The
management application resides in the HPE GreenLake cloud platform (access via https://console.greenlake.hpe.com) and
leverages the HPE GreenLake architecture, security, and unified operations.
A 3-year subscription to HPE GreenLake for Compute Ops Management is added by default when ordering an HPE ProLiant
Gen11 rack, tower, or micro server.
For more information, visit the HPE GreenLake for Compute Ops Management QuickSpecs:
https://www.hpe.com/psnow/doc/a50004263enw
Security
• UEFI Secure Boot and Secure Start support.
• Tamper-free updates – components digitally signed and verified.
• Immutable Silicon Root of Trust
• Ability to rollback firmware
• FIPS 140-2 validation
• Secure erase of NAND/User data
• Common Criteria certification
• Configurable for PCI DSS compliance
• Embedded TPM (Trusted Platform Module) 2.0. Disabled on shipments to China.
• Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser
• Bezel Locking Kit option.
• Support for Commercial National Security Algorithms (CNSA)
• Chassis Intrusion detection option
• Secure Recovery – recover critical firmware to a known good state on detection of compromised firmware
Warranty
This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of Hewlett Packard
Enterprise Authorized Channel Partners resellers. Hardware diagnostic support and repair are available for three years from the
date of purchase. Support for software and initial setup is available for 90 days from the date of purchase. Enhancements to
warranty services are available through HPE Services operational services or customized service agreements. Hard drives have
either a one-year or three-year warranty; refer to the specific hard drive QuickSpecs for details.
Notes: Server Warranty includes 3-Year Parts, 3-Year Labor, and 3-Year Onsite support with next business day response.
Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two
categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers
decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added
complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. Additional
information regarding worldwide limited warranty and technical support is available at:
https://www.hpe.com/support/ProLiantServers-Warranties
Page 16
Optional Features
Server Management
HPE iLO Advanced
HPE iLO Advanced licenses offer smart remote functionality for all HPE ProLiant servers without compromise. The license includes
the full integrated remote console, virtual keyboard, video, and mouse (KVM), multi-user collaboration, console record and replay,
and GUI-based and scripted virtual media and virtual folders. You can also activate the enhanced security and power management
functionality.
HPE OneView Advanced

HPE OneView Advanced offers a sophisticated level of automation to infrastructure management by taking a template-driven
approach to provisioning, updating, and integrating compute, storage, and networking infrastructure. It builds upon the base
features of HPE OpenView Standard and provides full-featured licenses which can be purchased for managing multiple HPE server
generations.
To learn more, visit http://www.hpe.com/info/oneview.
HPE InfoSight for Servers

HPE InfoSight for Servers combines the cloud-based machine learning of InfoSight with the health and performance monitoring of
Active Health System (AHS) and iLO to optimize performance and predict and prevent problems. The end result is an intelligent
environment that modernizes IT operations and enhances the support experience by predicting and preventing the infrastructure
issues that lead to application disruptions, wasted IT staff time, and missed business opportunities.
Learn more at https://www.hpe.com/us/en/solutions/infosight.html
HPE Insight Cluster Management Utility (CMU)

HPE Insight Cluster Management Utility is a Hyperscale management framework that includes software for the centralized
provisioning, management, and monitoring of nodes and infrastructure. Learn more at http://www.hpe.com/info/cmu
Accelerator and GPU Information

Hewlett Packard Enterprise supports various accelerators on select HPE ProLiant servers to support different workloads. The
accelerators enable seamless integration of GPU computing with HPE ProLiant servers for high-performance computing, large.
data center graphics, deep learning and virtual desktop deployments. These accelerators deliver all of the standard benefits of
GPU computing while enabling maximum reliability and tight integration with system monitoring and management tools such as
HPE Insight Cluster Management Utility.
One Config Simple (OCS/SCE)

OCS/SCE is a guided self-service tool to help sales and non-technical people provide customers with initial configurations in 3 to 5
minutes. You may then send the configuration on for configuration help or use it in your existing ordering processes. If you require
"custom" rack configuration or configuration for products not available in SCE, please contact Hewlett Packard Enterprise
Customer Business Center or an Authorized Partner for assistance.
https://h22174.www2.hpe.com/SimplifiedConfig/Welcome#
Rack and Power Infrastructure

The story may end with servers, but it starts with the foundation that makes compute go – and business grow. ' 'We've reinvented
our entire portfolio of rack and power products to make IT infrastructure more secure, practical, and efficient. In other words, '
'we've created a more robust, smarter, and simpler infrastructure to help you get the most out of your IT equipment. As an industry
leader, Hewlett Packard Enterprise is uniquely positioned to address the key concerns of power, cooling, cable management, and
system access.
HPE G2 Advanced and Enterprise Racks are perfect for the server room or ' 's modern data center, with enhanced airflow and
thermal management, flexible cable management, and a 10-year Warranty to support higher-density computing.
HPE G2 PDUs offer reliable power in flexible form factors that operate at temperatures up to 60°C, include color-coded outlets and
load segments, and a low-profile design for optimal access to the rack and support for dense rack environments.
Page 17
Optional Features
HPE Uninterruptible Power Systems are cost-effective power protection for any workload. Some UPSs include options for remote
management and extended runtime modules so ' 'your critical dense data center is covered in power outages.
HPE KVM Solutions include a console and switches designed to work reliably with your server and IT equipment. ' 'We've got a
cost-effective KVM switch for your first rack and multiple connection IP switches with remote management and security
capabilities to keep your data center rack up and running.
Learn more about HPE Racks, KVM, PDUs, and UPSs at HPE Rack and Power Infrastructure.
Page 18
Service and Support
HPE Services
No matter where you are in your digital transformation journey, you can count on HPE Services to deliver the expertise you need
when, where and how you need it. From planning to deployment, ongoing operations and beyond, our experts can help you realize
your digital ambitions.
https://www.hpe.com/services
Consulting Services
No matter where you are in your journey to hybrid cloud, experts can help you map out your next steps. From determining what
workloads should live where, to handling governance and compliance, to managing costs, our experts can help you optimize your
operations.
https://www.hpe.com/services/consulting
HPE Managed Services

HPE runs your IT operations, providing services that monitor, operate, and optimize your infrastructure and applications, delivered
consistently and globally to give you unified control and let you focus on innovation.
HPE Managed Services | HPE
Operational services
Optimize your entire IT environment and drive innovation. Manage day-to-day IT operational tasks while freeing up valuable time
and resources. Meet service-level targets and business objectives with features designed to drive better business outcomes.
https://www.hpe.com/services/operational
HPE Complete Care Service

HPE Complete Care Service is a modular, edge-to-cloud IT environment service designed to help optimize your entire IT
environment and achieve agreed upon IT outcomes and business goals through a personalized experience. All delivered by an
assigned team of HPE Services experts. HPE Complete Care Service provides:
• A complete coverage approach -- edge to cloud
• An assigned HPE team
• Modular and fully personalized engagement
• Enhanced Incident Management experience with priority access
• Digitally enabled and AI driven customer experience
https://www.hpe.com/services/completecare
HPE Tech Care Service

HPE Tech Care Service is the operational support service experience for HPE products. The service goes beyond traditional
support by providing access to product specific experts, an AI driven digital experience, and general technical guidance to not only
reduce risk but constantly search for ways to do things better. HPE Tech Care Service delivers a customer-centric, AI driven, and
digitally enabled customer experience to move your business forward. HPE Tech Care Service is available in three response levels.
Basic, which provides 9x5 business hour availability and a 2-hour response time. Essential which provides a 15-minute response
time 24x7 for most enterprise level customers, and Critical which includes a 6-hour repair commitment where available and outage
management response for severity 1 incidents.
https://www.hpe.com/services/techcare
Page 19
Service and Support
HPE Lifecycle Services

HPE Lifecycle Services provide a variety of options to help maintain your HPE systems and solutions at all stages of the product
lifecycle. A few popular examples include:
• Lifecycle Install and Startup Services: Various levels for physical installation and power on, remote access setup,
installation and startup, and enhanced installation services with the operating system.
• HPE Firmware Update Analysis Service: Recommendations for firmware revision levels for selected HPE products, taking
into account the relevant revision dependencies within your IT environment.
• HPE Firmware Update Implementation Service: Implementation of firmware updates for selected HPE server, storage, and
solution products, taking into account the relevant revision dependencies within your IT environment.
• Implementation assistance services: Highly trained technical service specialists to assist you with a variety of activities,
ranging from design, implementation, and platform deployment to consolidation, migration, project management, and
onsite technical forums.
• HPE Service Credits: Access to prepaid services for flexibility to choose from a variety of specialized service activities,
including assessments, performance maintenance reviews, firmware management, professional services, and operational
best practices.
Notes: To review the list of Lifecycle Services available for your product go to:
https://www.hpe.com/services/lifecycle
For a list of the most frequently purchased services using service credits, see the HPE Service Credits Menu
Other Related Services from HPE Services:

HPE Education Services
Training and certification designed for IT and business professionals across all industries. Broad catalogue of course offerings to
expand skills and proficiencies in topics ranging from cloud and cybersecurity to AI and DevOps. Create learning paths to expand
proficiency in a specific subject. Schedule training in a way that works best for your business with flexible continuous learning
options.
https://www.hpe.com/services/training
Defective Media Retention

An option available with HPE Complete Care Service and HPE Tech Care Service and applies only to Disk or eligible SSD/Flash
Drives replaced by HPE due to malfunction.
Consult your HPE Sales Representative or Authorized Channel Partner of choice for any additional questions and services options.
Parts and Materials
HPE will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware product in
operating condition, including parts and materials for available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set forth in
the manufacturer's operating manual, product quick-specs, or the technical product data sheet will not be provided, repaired, or
replaced as part of these services.
How to Purchase Services
Services are sold by Hewlett Packard Enterprise and Hewlett Packard Enterprise Authorized Service Partners:
• Services for customers purchasing from HPE or an enterprise reseller are quoted using HPE order configuration tools.
• Customers purchasing from a commercial reseller can find services at https://ssc.hpe.com/portal/site/ssc/
Page 20
Service and Support
AI Powered and Digitally Enabled Support Experience

Achieve faster time to resolution with access to product-specific resources and expertise through a digital and data driven
customer experience
Sign into the HPE Support Center experience, featuring streamlined self-serve case creation and management capabilities with
inline knowledge recommendations. You will also find personalized task alerts and powerful troubleshooting support through an
intelligent virtual agent with seamless transition when needed to a live support agent.
https://support.hpe.com/hpesc/public/home/signin
Consume IT On Your Terms

HPE GreenLake edge-to-cloud platform brings the cloud experience directly to your apps and data wherever they are—the edge,
colocations, or your data center. It delivers cloud services for on-premises IT infrastructure specifically tailored to your most
demanding workloads. With a pay-per-use, scalable, point-and-click self-service experience that is managed for you, HPE
GreenLake edge-to-cloud platform accelerates digital transformation in a distributed, edge-to-cloud world.
• Get faster time to market
• Save on TCO, align costs to business
• Scale quickly, meet unpredictable demand
• Simplify IT operations across your data centers and clouds
To learn more about HPE Services, please contact your Hewlett Packard Enterprise sales representative or Hewlett Packard
Enterprise Authorized Channel Partner. Contact information for a representative in your area can be found at "Contact HPE"
https://www.hpe.com/us/en/contact-hpe.html
For more information

http://www.hpe.com/services
Page 21
Pre-Configured Models
Pre-Configured models ship with the configurations below.

• Pre-Configured models ship with the configurations below. Options can be selected from the Core or Additional options
section of this QuickSpecs.
• Hewlett Packard Enterprise does not allow factory integration of options into pre-configured models. Any additional
options purchased will not be shipped inside the server.
• Network Choice models do not include embedded LOM.
P57685-B21 P57686-B21 P57687-B21

P57685-291 P57686-291 P57687-291
SKU Number
P57685-421 P57686-421 P57687-421
P57686-AA1
HPE ProLiant DL320 Gen11 3408U HPE ProLiant DL320 Gen11 4410Y
HPE ProLiant DL320 Gen11 3408U 1.8GHz 8-core 1P 16GB-R 8SFF
2.0GHz 12-core 1P 16GB-R
1.8GHz 8-core 1P 16GB-R 4LFF
500W PS Server (‑B21 & ‑291 & MR408i-o 8SFF 500W PS Server
500W PS Server (‑B21 & ‑291)
‑AA1) (‑B21 & ‑291)
Model Name
HPE ProLiant DL320 Gen11 4410Y
HPE ProLiant DL320 Gen11 3408U HPE ProLiant DL320 Gen11 3408U
2.0GHz 12-core 1P 16GB-R
1.8GHz 8-core 1P 16GB-R 4LFF 1.8GHz 8-core 1P 16GB-R 8SFF
MR408i-o 8SFF 1000W PS Server
1000W PS Server (‑421) 1000W PS Server (‑421)
(‑421)
HPE ProLiant DL320 Gen11 4LFF HPE ProLiant DL320 Gen11 8SFF HPE ProLiant DL320 Gen11 8SFF
Chassis
Configure-to-order Server Configure-to-order Server Configure-to-order Server
Processor 3408U (8 core, 1.8 GHz, 125W) 3408U (8 core, 1.8 GHz, 125W) 4410Y (12 core, 2.0 GHz, 150W)
Number of
One with standard heatsink
Processors
16 GB (1x16 GB, 4800 MT/s)
Memory
Notes: Runs at 4000 MT/s due to processor limitation.
Network
HPE embedded 2-port 1 GbE Ethernet adapter (BCM5720)
Controller
Embedded SATA controller (AHCI or Embedded SATA controller (AHCI or HPE MR408i-o Gen11 x8 Lanes
Storage Intel SATA software RAID controller) Intel SATA software RAID controller) 4GB Cache OCP SPDM Storage
(‑B21 & ‑421) (‑B21 & ‑421 & ‑AA1) Controller
Controller
Notes: Smart Storage battery
included
Included
None included, 4 LFF supported None included, 8 SFF supported None included, 8 SFF supported
Hard Drives
None included (Optical Drive options available) (‑B21 & ‑421)
Optical Drive
Optional HPE 9.5mm SATA DVD-RW Optical Drive, HPE Mobile USB DVD-RW Drive (‑291)
Expansion 1 x16 FHHL PCIe Gen5; 1 OCP 3.0 Slot as standard.
Slots 1 x16 FHHL PCIe Gen5 optional
Power 1x HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit (‑B21 & ‑291)
Supply 1x HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit (‑421)
Fans 5x Standard Fans 5x Standard Fans 7x Standard Fans
Page 22
Management HPE iLO 6

Rail Kit HPE Easy Install Rail 2 Kit HPE Easy Install Rail 1 Kit HPE Easy Install Rail 1 Kit
TPM (Trusted Platform Module)

Security Notes: Enabling TPM 2.0 no longer requires TPM module option kit for Gen11 as it is an embedded feature
and disabled on shipments to China.
Not certified Not certified (‑B21, ‑291 & ‑AA1)

Energy Star
Energy Star 4.0 Certified (-421)
Form Factor 1U Rack
Warranty Server warranty includes 3-year parts, 3-year labor, 3-year onsite support with next business day response.
P57688-B21 P69302-005
P57688-291
P57688-421
SKU Number
P57688-B21
P57688-291
P57688-421
HPE ProLiant DL320 Gen11 5416S 2.0GHz 16-core HPE ProLiant DL320 Gen11 5416S 2.0GHz 16-core
1P 32GB-R MR408i-o 8SFF 500W PS Server (‑B21 & 1P 64GB-R 8SFF 800W RPS AMS Server
Model Name ‑291)
HPE ProLiant DL320 Gen11 5416S 2.0GHz 16-core
1P 32GB-R MR408i-o 8SFF 1000W PS Server (‑421)
Chassis HPE ProLiant DL320 Gen11 8SFF Configure-to-order Server
Processor 5416S (16 core, 2.0 GHz, 150W)
Number of
One with standard heatsink
Processors
32 GB (1x32 GB, 4800 MT/s) 64 GB (2x32 GB, 4800 MT/s)
Memory
Notes: Runs at 4400 MT/s due to processor limitation. Notes: Runs at 4400 MT/s due to processor limitation.
Network
HPE embedded 2-port 1 GbE Ethernet adapter
Controller
HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM
Storage Embedded SATA controller (AHCI or Intel SATA
Storage Controller
Controller software RAID controller)
Notes: Smart Storage battery included
Included
None ship standard, 8 SFF supported
Hard Drives
None included (Optical Drive options available) (‑B21 &
‑421)
Optical Drive None included (Optical Drive options available)
Optional HPE 9.5mm SATA DVD-RW Optical Drive, HPE
Mobile USB DVD-RW Drive (‑291)
Page 23
Expansion 1 x16 FHHL PCIe Gen5; 1 OCP 3.0 Slot as standard.

Slots 1 x16 FHHL PCIe Gen5 optional
1x HPE 500W Flex Slot Platinum Hot Plug Low
Power Halogen Power Supply Kit (‑B21 & ‑291) 2x HPE 800W Flex Slot Platinum Hot Plug Low
Supply 1x HPE 1000W Flex Slot Titanium Hot Plug Power Halogen Power Supply Kit
Supply Kit (‑421)
Fans 7x Standard Fans 5x Standard Fans
Not certified (‑B21 & ‑291)
Energy Star Not certified
Energy Star 4.0 Certified (-421)
Management HPE iLO 6
Rail Kit HPE Easy Install Rail 1 Kit
TPM (Trusted Platform Module)
Security Notes: Enabling TPM 2.0 no longer requires TPM module option kit for Gen11 as it is an embedded feature
and disabled on shipments to China.
Form Factor 1U Rack
Warranty Server warranty includes 3-year parts, 3-year labor, 3-year onsite support with next business day response.
Country Code Key

• -B21 = Americas & AP (Japan and PRC excluded)
• -005 = HPE Express Buy for US and Canada
• -291 = Japan
• -421 = Europe, the Middle East and Africa
• -AA1 = PRC
Notes: Enabling TPM 2.0 no longer requires TPM module option kit for Gen11 since It is an embedded feature.
Page 24
Configuration Information
Smart Templates from HPE

HPE is releasing new Smart Template technology in the One Config Advanced (OCA) configurator. These Templates represent the
CTO equivalents of the top-selling BTO configurations. They are intended to provide simple starting points to assist you in easily
creating and customizing your desired Server solutions. HPE Servers that have Platform Templates developed by HPE Product
Managers will have a separate tab in the HPE OCA configurator.
Workload Solutions Templates from HPE

The Workload Solutions Templates build on the Smart Templates technology to easily develop working configurations of the most
compelling Workload Solutions. The templates complement the reference Builds developed by HPE. Workload Solutions templates
preconfigure some of the key architecture decisions and make it easier for Sellers to get started and complete a differentiated server
solution for your ' 'customer's specific workload.
Mainstream SKUs
HPE launched the Mainstream SKU initiative as a market-driven approach to Demand Steering. It is a simplified portfolio of our top-
selling options that meet the current and future market trends. HPE has committed to providing a more predictable and faster
experience for these options. Mainstream SKUs enjoy higher safety stock levels and have higher fulfillment service levels than non-
Mainstream SKUs. Mainstream orders are fulfilled +30% faster than non-Mainstream orders, have fewer shortages, and have better
recovery dates. This platform has Mainstream SKUs in the options portfolio and is eligible for an improved Mainstream
experience. Mainstream SKUs are designated with a Mainstream symbol in our configurators.
Mainstream Configurations
HPE is using the new Smart Templates technology to present Mainstream configurations. All the options in a Mainstream
configuration are pre-selected Mainstream SKUs to optimize the performance, predictability, and fulfillment experience. Check the
Template section in our configurators for eligible Mainstream configurations.
Page 25
This section lists some of the steps required to configure a Factory Integrated Model. To ensure valid configurations are
ordered, Hewlett Packard Enterprise recommends using an HPE-approved configurator. Contact your local sales representative for
information on configurable product offerings and requirements.
• Factory Integrated Models must start with a CTO Server.
• FIO indicates that this option is only available as a factory installable option.
• Some options may not be integrated at the factory. Contact your local sales representative for additional information
Step 1: Base Configuration (choose one (1) of the following (3) configurable models from the tables below)
CTO Server HPE PrLiant HPE ProLiant HPE ProLiant HPE ProLiant
DL320 Gen11 DL320 Gen11 DL320 Gen11 DL320 Gen11
4 LFF CTO Server 8 SFF CTO Server 12 LFF CTO Server GPU CTO Server
SKU Number P52765-B21 P52766-B21 P52767-B21 P61218-B21
TAA SKU1 P52765-B21#GTA P52766-B21#GTA P52767-B21#GTA P61218-B21#GTA
Processor Not included as standard
DIMM Slots 16-DIMM slots
Storage 8 SATA ports, choice of HPE modular Smart Array and PCIe plug-in Controllers, and Intel® VROC Software RAID.
Controller
PCIe PCIe 5.0: 2 slots (x 16 FHHL)
1x OCP 3.0 in PCIe 5.0 (x16)
Drive Cage – 4 SAS/SATA LFF (8+2) SAS/SATA SFF 12 SAS/SATA LFF 4 SFF SAS/SATA/NVMe or
included Direct attach for 4 LFF (8+2) x2 NVMe SFF or, Direct attach support for 10 8 EDSFF E3.s 1T
SATA (8+2) x4 NVMe SFF LFF SATA
Network Two (2) Embedded Broadcom BCM5720 1 GbE networking port
Controller Choice of either OCP 3.0 or select standup network adapters for primary networking selection plus
additional/optional standup network adapters
Fans Support for (7) High-Performance Fans
Management HPE iLO with Intelligent Provisioning (standard), iLO Advanced (optional), and OneView (optional)
USB Front: One (1) USB 3.2 Gen1 + iLO service port
Rear: Two (2) USB 3.2 Gen1 ports
Internal: One (1) USB 2.0 port
Option: One (1) Front Option: One (1) Front
USB 2.0 port USB 2.0 port
Security Embedded TPM 2.0 (Trusted Platform Module)
Notes:
− Enabling TPM 2.0 no longer requires TPM module option kit for Gen11 since It is an embedded feature.
− Disabled on shipments to China
Rail Kit Optional Easy Install rails and CMA
Form Factor 1U Rack
Warranty 3-year parts, 3-year labor, 3-year onsite support with next business day response.
Notes:
− All DL320 Gen11 CTO Server models require the selection of Processor, Memory and Power Supply. Backplane to be
further selected in 8SFF and GPU CTO Server.
− 1HPE offers multiple Trade Agreement Act (TAA) compliant configurations to meet the needs of US Federal
Government customers. These products are either manufactured or substantially transformed in a designated country.
TAA compliance is only provided when HPE options are included as part of factory integrated orders (CTO).
− All CTO servers are Energy Star 3.0 compliant. After January 11, 2024, Energy Star 3.0 compliance is no longer valid.
Energy Star 4.0 certification will be valid upon publication. Supported Rail kit to be defaulted for CTO Model in the
configurator. But customer can deselect the Rail kit if the CTO Model is selected without Rack (Standalone server).
− If GPU CTO Model is selected, then Performance Heatsink must be selected.
Page 26
Step 2: Choose Options

Step 2a: Choose Processor
Processor Option Kits (Required Processor)
Notes:
− All SKUs below ship with one processor only. Adequate fans and heatsinks must be selected.
− Processor with TDP greater than 185W require High Performance Heatsink (P52756-B21) and High-
Performance Fan Kit (P48908-B21).
− 5th Generation Intel Xeon supports “HPE DDR5 SmartMemeory – Registered (RDIMM), up to 5600MT/s”.
− 4th Generation Intel Xeon supports “HPE DDR5 SmartMemeory – Registered (RDIMM), up to 4800MT/s”.
− 96 GB 4800 MT/s Memory cannot be selected if HBM or MCC die.
− 3508U supports PCIe4.0 Only
5th Generation Intel Xeon-Platinum
Intel Xeon-Platinum 8581V 2.0GHz 60-core 270W Processor for HPE P67109-B21
5th Generation Intel Xeon-Gold 6
Intel Xeon-Gold 6526Y 2.8GHz 16-core 195W Processor for HPE P67080-B21
Intel Xeon-Gold 6548Y+ 2.5GHz 32-core 250W Processor for HPE P67082-B21
Intel Xeon-Gold 6534 3.9GHz 8-core 195W Processor for HPE P67083-B21
Intel Xeon-Gold 6538N 2.1GHz 32-core 205W Processor for HPE P67104-B21
Intel Xeon-Gold 6554S 2.2GHz 36-core 270W Processor for HPE P67110-B21
Intel Xeon-Gold 5515+ 3.2GHz 8-core 165W Processor for HPE P67079-B21
Intel Xeon-Gold 5512U 2.1GHz 28-core 185W Processor for HPE P67101-B21
5th Generation Intel Xeon-Silver
Intel Xeon-Silver 4509Y 2.6GHz 8-core 125W Processor for HPE P67090-B21
Intel Xeon-Silver 4510 2.4GHz 12-core 150W Processor for HPE P67091-B21
Intel Xeon-Silver 4516Y+ 2.2GHz 24-core 185W Processor for HPE P67093-B21
5th Generation Intel Xeon-Bronze
Intel Xeon-Bronze 3508U 2.1GHz 8-core 125W Processor for HPE P67100-B21
Notes: Intel Bronze CPU Models (3508U) is capable of supporting up to PCIe Gen4 speed. This will have
impact in high speed Networking & InfiniBand cards when selected with Bronze CPU Model.

Page 27
4 Generation Intel Xeon-Gold 5
th
4 Generation Intel Xeon-Silver
th
Intel Xeon-Silver 4416+ 2.0GHz 20-core 165W Processor for HPE P49611-B21
4 Generation Intel Xeon-Bronze
th
Notes: Intel Bronze CPU Models (3408U) is capable of supporting up to PCIe Gen4 speed. This will have impact in high speed
Networking & InfiniBand cards when selected with Bronze CPU Model.
Step 2b: Choose Memory Options

Please select one or more memory DIMMs from below.
For the new Gen11 memory population rule whitepaper and optimal memory performance guidelines and memory speed table,
please go to:
http://www.hpe.com/docs/memory-population-rules
For memory Reliability, Accessibility, and Serviceability (RAS) features whitepaper like Gen11 Fast Fault Tolerance and legacy
mirrored memory feature, etc., please go to: http://www.hpe.com/docs/memory-ras-feature.
Notes:
− HPE Server Memory compatibility for a specific server platform may vary or be limited within a server platform depending
upon the specific configuration being requested. Because each server environment and requirements can vary, memory
compatibility is based not only upon the server family but may also be affected by the amount and type of additional
hardware options installed within a specific server configuration. For this reason, some HPE memory DIMMs may be
qualified for an HPE server model or family and yet occasionally not be supported with some configurations within that
server family.
− Memory DIMMs must be selected in quantities 1, 2, 4, 6, 8, 12, or 16.
− The maximum memory speed and capacity are a function of the memory type, memory configuration, and processor
model.
For additional information, please see the HPE DDR5 Smart Memory QuickSpecs
Registered DIMMs DDR5 (RDIMMs)
HPE 16GB (1x16GB) Single Rank x8 DDR5-5600 CAS-46-45-45 EC8 Registered Smart Memory Kit P64705-B21
HPE 32GB (1x32GB) Dual Rank x8 DDR5-5600 CAS-46-45-45 EC8 Registered Smart Memory Kit P64706-B21
HPE 128GB (1x128GB) Quad Rank x4 DDR5-5600 CAS-52-45-45 EC8 Registered 3DS Smart Memory Kit P64709-B21
Page 28
Notes:
− Only HPE DDR5 5600 MT/s SKUs can be selected with 5th Generation Intel processors.
− Only HPE DDR5 4800 MT/s SKUs can be selected with 4th Generation Intel processors.
− Total memory selection must be in quantities of 1, 2, 4, 6, 8, 12 or 16. For more detailed information regarding memory
population rules, please refer to - https://www.hpe.com/docs/server-memory.
− If Memory Fault Tolerance is selected, then only x4 memory options can be selected.
− Mixing x4, x8 or 3DS memory is not supported.
− Mixing 4800 Memory and 5600 Memory is not allowed.
− 96 GB Memory cannot be mixed with any other Memory and is supported with only select processors.
− For the GPU CTO Server, 96 GB and higher memory DIMMs are supported only with 25C and lower ambient temperature.
− 96 and 128 GB memory DIMMs require high performance fan kit.
− 5600 MT/s memory SKUs offer a transfer rate of 5600 MT/s at 1 DIMM per channel and 4400 MT/s at 2 DIMMs per
channel.
− 4800 MT/s memory SKUs offer a transfer rate of 4800 MT/s at 1 DIMM per channel and 4400 MT/s at 2 DIMMs per
channel.
− 96 GB 4800 MT/s Memory cannot be selected if HBM or MCC die.
Memory Blank Kit
HPE DDR4 DIMM Blank Kit P07818-B21
Notes: Memory DIMM blanks must be installed in each empty slot.
Step 2c: Choose Power Supplies
Please select one or two power supplies from below.
Notes: Mixing of 2 different power supplies is NOT supported.
HPE Flex Slot Power Supplies
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit 865408-B21
Notes:
− If a 500W power supply is selected with HPE ProLiant DL320 Gen11 8SFF x4 Tri-Mode 24G U.3 BC Backplane Kit
(P52747-B21), then the internal controller must be selected. However, this will onl support SAS/SATA drives.
− If a 500W power supply is selected with 8SFF CTO Server, NVMe drives cannot be selected, and vice versa.
HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit P03178-B21
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit P38995-B21
Notes: Only supports high line voltage (200 VAC to 240 VAC).
HPE 1800W-2200W Flex Slot Titanium Hot Plug Power Supply Kit P44712-B21
Page 29
Step 2d: Choose backplane /drive cage

No optional backplanes are available for the existing LFF CTO configurations.
8 SFF customers can select the back planes from the following options.
HPE ProLiant DL320 Gen11 8SFF x1 Tri-Mode 24G U.3 BC Backplane Kit P52743-B21
Notes:
− If the 8SFF Drive cage is selected with PCIe Internal controller, then '8SFF TM Cable Kit (P52775-B21) '
must be selected.
− If the 8SFF Drive cage is selected with OROC controller, then '8SFF OROC Cable (P52780-B21)' must be
selected.
− 8SFF x1 U.3 Drive cage with Direct attach supports 8 SATA Drives only.
− If MR416i-p/MR216i-p/SR932i-p/MR416i-o/MR216i-o controller is selected along with 8SFF x1 U.3 and
2SFF x4 U.3 drive cage, then one controller is enough to support both the drive cages with the selection
of '8SFF cable kit' and '2SFF TM cable kit.'
− If ‘HPE NS204i-u Gen11 Hot Plug Boot Optimized is selected with 8SFF x1 U.3 drive cage, then Internal
PCIe/OROC controller and PCIe/OROC cable must be selected.
HPE ProLiant DL320 Gen11 8SFF x4 Tri-Mode 24G U.3 BC Backplane Kit P52747-B21
Notes:
− If the 8SFF Drive cage is selected with PCIe Internal controller, then '8SFF TM Cable Kit (P52775-B21)''
must be selected.
− If the 8SFF Drive cage is selected with OROC controller, then '8SFF OROC Cable (P52780-B21)' must be
selected.
− 8SFF x4 U.3 Drive cage with Direct attach supports 8 NVMe U.3 Drives only.
− If 8SFF x4 U.3 Drive cage is selected with 2SFF U.3 drive cage and no Internal controller or NVMe adapter
(P25527-B21) is selected, then 2SFF U.3 drive cage can support SATA drives only.
− If 8SFF x4 Drive cage and 2SFF drive cage is selected with Qty=1 of Internal controller, then '8SFF cable
kit' or '2SFF TM cable kit (P52776-B21)' must be selected
− If 8SFF x4 Drive cage and 2SFF drive cage is selected with Qty=2 of Internal controller, then both '8SFF
cable kit' and '2SFF TM cable kit (P52776-B21)' must be selected
− If 8SFF x4 Drive cage and 2SFF Drive cage are selected along with MR408i-o controller, then '2SFF TM
cable kit (P52776-B21)' must be selected.
− '2SFF Drive cage' or '1U DP/USB/ODD Blank Kit' requires the selection of an 8SFF Drive cage.
− If 8SFF x4 Drive cage and 2SFF Drive cage is selected along with SR932i-p controller, then '8SFF TM
HPE ProLiant DL320 Gen11 2SFF x4 Tri-Mode 24G U.3 BC Drive Cage Kit P52751-B21
Notes:
− If the 8SFF Drive cage is selected with PCIe Internal controller, then '8SFF TM Cable Kit(P52775-B21)''
must be selected.
− If the 2SFF Drive cage is selected with PCIe Internal controller or OROC controller, then the '2SFF TM
Cable Kit (P52776-B21)' must be selected.
− If the 2SFF Drive cage is selected with NVMe 2p Adapter, then '2SFF Retimer Cable(P52777-B21)' must
be selected.
− 2SFF U.3 Drive cage with direct attach supports either 2 NVMe U.3 drives or SATA drives.
2SFF x4 U.3 drive cage, then one controller is enough to support both the drive cages with the selection
of '8SFF cable kit' and '2SFF TM cable kit (P52776-B21).'
− If the 8SFF x4 Drive cage and 2SFF drive cage are selected with Qty=1 of the Internal controller, then
'8SFF cable kit' or '2SFF TM cable kit (P52776-B21)' must be selected.
− If the 8SFF x4 Drive cage and 2SFF drive cage are selected with Qty=2 of the Internal controller, then
both '8SFF cable kit' and '2SFF TM cable kit (P52776-B21)' must be selected.
Page 30
− If the 8SFF x4 Drive cage and 2SFF Drive cage is selected along with the SR932i-p controller, then the
'8SFF TM cable kit (P52775-B21)' must be selected.
HPE ProLiant DL3X0 Gen11 1U 8SFF Display Port/USB/Optical Drive Blank Kit P48926-B21
Notes:
− Either '2SFF drive cage' or '1U DP/USB/ODD Blank' can be selected.
− '2SFF Drive cage' or '1U DP/USB/ODD Blank Kit' requires an 8SFF Drive cage configuration.
HPE ProLiant DL320 Gen11 8EDSFF x4 NVMe Drive Cage Kit P61219-B21
Notes:
− Supported only with HPE ProLiant DL320 Gen11 GPU CTO Server (P61218-B21)
− 8EDSFF Drive cage is to be selected with HPE ProLiant DL320 Gen11 GPU 4x Direct Connected NVMe
FIO Enablement Kit (P62181-B21) and drive cage will be connected to Direct attach and can support
maximum of 4 EDSFF drives only.
HPE ProLiant DL320 Gen11 4SFF x4 Tri-Mode 24G U.3 BC Drive Cage Kit P61221-B21
Notes:
− Supported only with GPU CTO Server (P61218-B21).
− If 4SFF U.3 drive cage is selected with MR416i-p controller, then HPE ProLiant DL320 Gen11 4SFF Tri-
Mode Cable Kit (P62189-B21) must be selected.
− If 4SFF Drive cage is selected and MR416i-p is not selected, then HPE ProLiant DL320 Gen11 GPU 4x
Direct Connected NVMe FIO Enablement Kit () must be selected.
− If 4SFF U.3 Drive cage is selected with HPE ProLiant DL320 Gen11 GPU 4x Direct Connected NVMe FIO
Enablement Kit (P62181-B21) then drive cage will be connected to direct attach and support a maximum
of 4 NVMe U.3 drives only.
Step 3: Choose Additional Factory Integratable Options (FIO)

One of the following from each list may be selected if desired at the time of factory integration
HPE iLO Common Password FIO Setting P08040-B21
Notes:
− Replaces iLO default randomized password with an HPE-defined common password. HPE highly
recommends changing this password immediately after the initial onboarding process.
− Customers who want to choose their own custom iLO default password should use the HPE Factory
Express Integration Services.
HPE Bezel Lock Kit 875519-B21
Notes: Bezel lock kit requires selection of Bezel kit.
HPE ProLiant DL320 Gen11 GPU 4x Direct Connected NVMe FIO Enablement Kit P62181-B21
Notes:
− Supported only with GPU CTO Server.
− If 8EDSFF or 4SFF Drive cage is selected and MR416i-p is not selected, then "HPE DL320 G11 GPU 4xDC
NVMe FIO Kit" must be selected.
− If 8EDSFF Drive cage is selected with "HPE DL320 G11 GPU 4xDC NVMe FIO Kit" then drive cage will be
connected to Direct attach and can support Max=4 EDSFF drives only.
− If 4SFF U.3 Drive cage is selected with "HPE DL320 G11 GPU 4xDC NVMe FIO Kit" then drive cage will be
connected to direct attach and support Max=4 NVMe U.3 drives only.
− Cannot be selected if MR416i-p controller is selected.
− Max=1 of 'GPU 4xDC NVMe FIO Kit' or '4SFF TM Cable Kit' or '2xType-p NVMe Cable Kit' can be selected
Page 31
− If Qty=1 of GPU is selected with GPU CTO Server, then 'GPU 4xDC NVMe FIO Kit' or '2 GPU FIO Enable Kit'
must be selected. In GPU CTO Server if ‘GPU 4xDC NVMe FIO Kit' then the first GPU card selected will be
installed in the front of the server. This should not be considered for total PCIe selection.
HPE ProLiant DL320 Gen11 2SFF MLB FIO Power Cable Kit P66961-B21
Notes:
− Max=1
− If 2SFF Drive cage is selected and 8SFF drive cage is not selected then 2SFF MLB FIO Power Cable Kit
must be selected.
− 2SFF MLB FIO Power Cable Kit cannot be selected if 8SFF drive cage is selected.
− Not Supported with GPU CTO Server.
− 2SFF MLB FIO Power Cable Kit requires selection of 2SFF drive cage.
HPE FIO No Smart Storage Battery P06141-B21
Notes:
− If the 'Storage Battery Removal setting' is selected, then SR932/ MR416/ MR408 controller does not
require selecting the Battery.
− 'Storage Battery Removal setting' requires selection of SR932/ MR416/ MR408 controller.
− If the 'Storage Battery Removal 'setting' is selected, then Battery cannot be selected.
HPE ProLiant DL300 Gen10 Plus Platform RAS OS Control FIO Setting P27078-B21
HPE Smart Memory Fast Fault Tolerance FIO Setting 875293-B21
Notes:
Enables Fast Fault Tolerance mode, an HPE Memory RAS feature introduced in HPE Gen10 servers that
survives up to two DRAM failures.
This RAS feature combines Adaptive Double DRAM Device Correction (ADDC) with HPE Advanced Error
Detection Technology, resulting in significantly better memory reliability and availability than what ADDC
provides on its own. For more information, see our Memory RAS feature technical whitepaper.
If 'Memory fast fault Tolerance' is selected with Single Rank DIMM, then Min=2 and Max=16 DIMM's are
allowed for selection.
If 'Memory fast fault Tolerance' is selected with Dual Rank DIMM or Quad Rank DIMM, then Min=1 and
Max=16 DIMM's are allowed for selection.
HPE ProLiant DL300 Gen10 Plus Platform RAS OS Control FIO Setting P27078-B21
Notes:
Firmware first is ProLiant servers BIOS default selection. In this mode, monitoring functionality built into the design of the
server is first on the scene of correctable problems to determine quickly and accurately ' 'what's wrong and how to fix it.
Firmware first enables many platform-specific actions for errors, including predictive fault analysis. This technology functions
independently of the operating system and does not depend on O/S-based tools.
This SKU instructs factories to enable O/S first mode, a BIOS switch that allows experienced customers to have the operating
system handle correctable hardware errors. More errors could be observed in this mode, including soft ones that do not
necessarily indicate issues with the component or cause warranty replacement.
HPE Converged Infrastructure Management Software
HPE OneView w/o iLO including 3yr 24x7 Support Flexible Quantity E-LTU P8B26AAE
HPE OneView including 3yr 24x7 Support Flexible Quantity E-LTU E5Y35AAE
Step 4: Choose Additional Options for Factory Integration from the Core and Additional Options
sections below
Page 32
Core Options
HPE Processors (Please select one processor).

Notes:
− All SKUs below ship with a processor only. Adequate fans and heatsinks (standard or high performance) must be selected.
− 4800 MT/S maximum memory speed unless otherwise noted.
− 128GB SGX Enclave unless otherwise noted.
− Processors with TDP greater than 185W require High-Performance Heatsink (P52756-B21).
− Processors with TDP greater than 185W require High-Performance Fan Kit (P48908-B21).
4 Generation Intel Xeon-Gold 5
th
4 Generation Intel Xeon-Silver
th
Notes: 64GB SGX Enclave
Intel Xeon-Silver 4416+ 2.0GHz 20-core 165W Processor for HPE P49611-B21
Notes: 64GB SGX Enclave
4th Generation Intel Xeon-Bronze
HPE Memory
To streamline the configuration process for HPE ProLiant Gen11 servers and to provide the best product availability, HPE
recommends memory from the list here: http://www.hpe.com/products/recommend.
Best product availability is limited to the US, Canada, and Latin America at this time.
Notes: HPE Server Memory compatibility for a specific server platform may vary or be limited within a server platform
depending upon the specific configuration being requested. Because each server environment and requirements can vary,
memory compatibility is based not only upon the server family but may also be affected by the amount and type of additional
hardware options installed within a specific server configuration. For this reason, some HPE memory DIMMs may be qualified
for an HPE server model or family and yet occasionally not be supported with some configurations within that server family.
Maximum memory capacity and speed per processor depend on processor model selection or limitation.
Page 33
Core Options
HPE DDR5 Memory

Notes: DIMMs must be selected in quantities 1, 2, 4, 6, 8, 12, or 16 per socket.
Registered DIMMs (RDIMMs)
Notes:
− Mixing of x4 and x8 DIMMs is not allowed.
− Mixing of 3DS and non-3DS DIMMs is not allowed.
− Mixing of Single Rank and Dual Rank DIMM is allowed only when the total qty of DIMM selected is 16
− If Single Rank and Dual Rank DIMMs are mixed, then the Qty of Single Rank DIMM selected must be equal
to the quantity of Dual Rank DIMM.
− 128GB DIMMs require High-Performance Fan Kit (P48908-B21).
HPE DIMM blanks
HPE DDR4 DIMM Blank Kit P07818-B21
Optical Drives
HPE Mobile USB DVD-RW Optical Drive 701498-B21
HPE 9.5mm SATA DVD-ROM Optical Drive 726536-B21
HPE 9.5mm SATA DVD-RW Optical Drive 726537-B21
Notes:
− If Optical Drive is selected with 8SFF CTO Server, then '1U DP/USB/ODD Blank Kit' must be selected.
− If Optical Drive is selected with 4LFF CTO Server, then '4LFF ODD cable kit (P54641-B21)' must be
selected.
− Not Supported with 12LFF or the GPU CTO Server.
HPE ProLiant DL3X0 Gen11 1U LFF Display Port/USB Kit P48928-B21
Notes: Supported only with 4LFF CTO Server
HPE Hard Disk Drives

Mission Critical - 12G SAS - SFF Drives
HPE 2.4TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Self-encrypting FIPS HDD P28618-B21
HPE 1.2TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Self-encrypting FIPS HDD P28622-B21
Enterprise - 12G SAS - SFF Drives
HPE 2.4TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Multi Vendor HDD P28352-B21
HPE 1.8TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Multi Vendor HDD P53562-B21
HPE 1.2TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD P28586-B21
HPE 900GB SAS 12G Mission Critical 15K SFF BC 3-year Warranty Multi Vendor HDD P40432-B21
Page 34
Core Options
Midline - 6G SATA - SFF Drives

HPE 2TB SATA 6G Business Critical 7.2K SFF BC 1-year Warranty 512e HDD P28500-B21
Midline - 12G SAS - LFF Drives
HPE 20TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e ISE Multi Vendor HDD P53553-B21
HPE 16TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e ISE Multi Vendor HDD P23608-B21
HPE 14TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e Multi Vendor HDD P09155-B21
HPE 12TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e Multi Vendor HDD 881781-B21
HPE 8TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty 512e Multi Vendor HDD 834031-B21
HPE 6TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty 512e Multi Vendor HDD 861746-B21
HPE 4TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDD 833928-B21
HPE 2TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDD 833926-B21
Midline - 6G SATA - LFF Drives
HPE 20TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e ISE Multi Vendor HDD P53554-B21
HPE 12TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e Multi Vendor HDD 881787-B21
HPE 8TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty 512e Multi Vendor HDD 834028-B21
HPE 6TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty 512e Multi Vendor HDD 861742-B21
HPE 4TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDD 861683-B21
SSD Selection
For SSD selection guidance, please visit https://ssd.hpe.com/
Read Intensive – 12G SAS - SFF - Solid State Drives
HPE 7.68TB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD P40509-B21
HPE 960GB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD P40506-B21
Read Intensive –24G SAS - SFF - Solid State Drives
HPE 15.36TB SAS 24G Read Intensive SFF BC Multi Vendor SSD P49045-B21
HPE 960GB SAS 24G Read Intensive SFF BC Multi Vendor SSD P49029-B21
HPE 7.68TB SAS 24G Read Intensive SFF BC Self-encrypting FIPS PM6 SSD P41399-B21
HPE 3.84TB SAS Read Intensive SFF BC Self-encrypting FIPS 140-3 PM7 SSD P63875-B21
Notes: Require High-Performance Fan Kit (P48908-B21).
Mixed Use – 12 SAS - SFF - Solid State Drives
HPE 3.84TB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD P40512-B21
HPE 1.92TB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD P40511-B21
HPE 960GB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD P40510-B21
Mixed Use –24G SAS - SFF - Solid State Drives
HPE 6.4TB SAS 24G Mixed Use SFF BC Multi Vendor SSD P49057-B21
HPE 800GB SAS 24G Mixed Use SFF BC Multi Vendor SSD P49047-B21
HPE 1.6TB SAS 24G Mixed Use SFF BC Self-encrypting FIPS PM6 SSD P41401-B21
Page 35
Core Options
HPE 1.6TB SAS Mixed Use SFF BC Self-encrypting FIPS 140-2 PM7 SSD P63871-B21
Very Read Optimized - 6G SATA - SFF - Solid State Drives
Read Intensive - 6G SATA - SFF - Solid State Drives
HPE 7.68TB SATA 6G Read Intensive SFF BC Multi Vendor SSD P40501-B21
HPE 3.84TB SATA 6G Read Intensive SFF BC PM893a SSD P63910-B21
HPE 480GB SATA 6G Read Intensive SFF BC Multi Vendor SSD P40497-B21
HPE 480GB SATA 6G Read Intensive SFF BC Self-encrypting 5400P SSD P58236-B21
HPE 480GB SATA 6G Read Intensive SFF BC PM893a SSD P63886-B21
HPE 1.92TB SATA 6G Read Intensive SFF BC Self-encrypting 5400P SSD P58240-B21
Mixed Use - 6G SATA - SFF - Solid State Drives
HPE 3.84TB SATA 6G Mixed Use SFF BC Multi Vendor SSD P40505-B21
HPE 1.92TB SATA 6G Mixed Use SFF BC Multi Vendor SSD P40504-B21
HPE 960GB SATA 6G Mixed Use SFF BC Multi Vendor SSD P40503-B21
HPE 960GB SATA 6G Mixed Use SFF BC Self-encrypting 5400M SSD P58244-B21
HPE 480GB SATA 6G Mixed Use SFF BC Multi Vendor SSD P40502-B21
HPE 1.92TB SATA 6G Mixed Use SFF BC Self-encrypting 5400M SSD P58248-B21
Mixed Use - 12G SAS - LFF –Solid State Drives
HPE 960GB SAS 12G Mixed Use LFF LPC Value SAS Multi Vendor SSD P37009-B21
Read Intensive - 6G SATA - LFF - Solid State Drives
HPE 960GB SATA 6G Read Intensive LFF LPC Multi Vendor SSD P47808-B21
NVMe Gen5 – Read Intensive
Read Intensive – NVMe – EDSFF - Solid State Drives
HPE 3.2TB NVMe Gen5 High Performance Mixed Use E3S EC1 EDSFF SPDM CM7 SSD P61191-B21
HPE 3.84TB NVMe Gen5 High Performance Read Intensive E3S EC1 EDSFF SPDM CM7 SSD P61179-B21
HPE 6.4TB NVMe Gen5 High Performance Mixed Use E3S EC1 EDSFF SPDM CM7 SSD P61195-B21
HPE 3.84TB NVMe Gen5 High Performance Read Intensive E3S EC1 EDSFF SPDM PM1743 SSD P57799-B21
HPE 1.92TB NVMe Gen5 Mainstream Performance Read Intensive E3S EC1 EDSFF CD7 SSD P56585-B21
Notes: Requires selection of 8EDSFF Drive cage and Gen5 Retimer card (P48833-B21) or SR932i-p
controller
Read Intensive - NVMe - SFF - Solid State Drives
HPE 15.36TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 PM1733a SSD P50224-B21
HPE 15.36TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 CM7 SSD P63841-B21
Page 36
Core Options
Read Intensive - NVMe - SFF – SED Solid State Drives
HPE 3.84TB NVMe Gen4 High Performance Read Intensive SFF BC Self-encrypting FIPS U.3 CM6 SSD P41403-B21
Mixed Use - NVMe - SFF - Solid State Drives
HPE 6.4TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 PM1735a SSD P50233-B21
HPE 6.4TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 CM7 SSD P63853-B21
HPE 800GB NVMe Gen4 Mainstream Performance Mixed Use SFF BC U.3 Static V2 Multi Vendor SSD P64999-B21
HPE 960GB NVMe Gen4 Mainstream Performance Read Intensive SFF BC U.3 Static V2 Multi Vendor SSD P64842-B21
HPE 1.6TB NVMe Gen4 High Performance Mixed Use SFF BC Self-encrypting FIPS U.3 CM6 SSD P41404-B21
HPE 1.6TB NVMe Gen4 Mainstream Performance Mixed Use SFF BC U.3 Static V2 Multi Vendor SSD P65007-B21
HPE 1.92TB NVMe Gen4 Mainstream Performance Read Intensive SFF BC U.3 Static V2 Multi Vendor SSD P64844-B21
HPE 3.2TB NVMe Gen4 Mainstream Performance Mixed Use SFF BC U.3 Static V2 Multi Vendor SSD P65015-B21
HPE 7.68TB NVMe Gen4 Mainstream Performance Read Intensive SFF BC U.3 Static V2 Multi Vendor SSD P64848-B21
VROC - Solid State Drives
HPE 3.84TB NVMe Gen4 Mainstream Performance Very Read Optimized E3S EC1 EDSFF P5430 SSD P63930-B21
Notes: Requires selection of 8EDSFF Drive cage (P61219-B21).
Read Intensive - M.2 - Solid State Drives
HPE 480GB NVMe Gen3 Mainstream Performance Read Intensive M.2 Multi Vendor SSD P40513-B21
HPE 480GB NVMe Gen4 Mainstream Performance Read Intensive M.2 PM9A3 SSD P69543-B21
HPE 960GB NVMe Gen3 Mainstream Performance Read Intensive M.2 Multi Vendor SSD P40514-B21
HPE 1.92TB NVMe Gen3 Mainstream Performance Read Intensive M.2 Multi Vendor SSD P40515-B21
HPE 480GB SATA 6G Read Intensive M.2 Multi Vendor SSD P47818-B21
Notes:
− Mixing of SATA M.2 and NVMe M.2 SSDs is not allowed.
− Need x7 fans (standard or performance).
− If M.2 SSD is selected then '2P Std Fan Kit' must be selected along with Standard Fan kit or High
Performance Fan kit must be selected. This rule is not applicable for GPU CTO server
− All the M.2 NVMe drive will only run maximum PCIe Gen3 speed in DL320 Gen11
Hard Drive Blank Kits

HPE Gen9 LFF HDD Spade Blank Kit 807878-B21
HPE Small Form Factor Hard Drive Blank Kit 666987-B21
HPE Networking
1 Gigabit Ethernet adapters
Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T Adapter for HPE P51178-B21
Intel I350-T4 Ethernet 1Gb 4-port BASE-T Adapter for HPE P21106-B21
Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T Adapter for HPE P26253-B21
Broadcom BCM57412 Ethernet 10Gb 2-port SFP+ Adapter for HPE P26259-B21
Page 37
Core Options

Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 Adapter for HPE P26262-B21
Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE P26264-B21
Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter for HPE P08443-B21
Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE P08458-B21
Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE P42044-B21
HPE Ethernet 10/25Gb 2-port Secure Network Adapter S2A69A
Notes:
− Recommended ambient temperature with High-Performance Fan Kit (P48908-B21)
− *Conditional support, with DAC (direct attach copper) cable only.
P26264-B21 P08443-B21 P08458-B21 P42044-B21 S2A69A
4 LFF (P52765-B21) 25C 35C 25C 25C 25C
8 SFF (P52766-B21) 25C 35C 25C 25C 25C
12 LFF (P52767-B21) 25C 35C 25C 25C 25C
GPU Dense (P61218-B21) with 1 Single 25C 35C 25C 25C 25C
Wide or 1 Double Wide GPU in front
GPU Dense (P61218-B21) with up to 2 25C 35C 25C 25C 25C
Single Wide GPU in front
GPU Dense (P61218-B21) with 2 Double 25C * 25C 25C * 25C * 25C *
Wide or 4 Single Wide GPUs in the front
100 Gigabit Ethernet Adapters

Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE P25960-B21
HPE Ethernet 100Gb 1-port QSFP28 PCIe3 x16 MCX515A-CCAT Adapter P31246-B21
Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter for HPE P21112-B21
Notes: Recommended ambient temperature with High-Performance Fan Kit (P48908-B21)
P25960-B21 P31246-B21 P21112-B21
4 LFF (P52765-B21) 25C 25C 25C
8 SFF (P52766-B21) 25C 25C 25C
12 LFF (P52767-B21) Not supported Not supported Not supported
GPU Dense (P61218-B21) with 1 Single Wide or 1 25C 25C 25C
Double Wide GPU in front
GPU Dense (P61218-B21) with up to 2 Single Wide 25C 25C 25C
GPU in front
GPU Dense (P61218-B21) with 2 Double Wide or 4 Not supported Not supported Not supported
Single Wide GPUs in front
200 Gigabit Ethernet Adapters
Mellanox MCX623105AS-VDAT Ethernet 200Gb 1-port QSFP56 Adapter for HPE P10180-B21
P10180-B21
4 LFF (P52765-B21) 25C
8 SFF (P52766-B21) 25C
12 LFF (P52767-B21) Not supported
GPU Dense (P61218-B21) with 1 Single Wide or 1 25C
GPU Dense (P61218-B21) with up to 2 Single Wide GPU 25C
in front
GPU Dense (P61218-B21) with 2 Double Wide or 4 Not supported
Single Wide GPUs in front
Page 38
Core Options
OCP 3.0 Adapters

Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE P51181-B21
Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE P08449-B21
Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T OCP3 Adapter for HPE P10097-B21
Broadcom BCM57412 Ethernet 10Gb 2-port SFP+ OCP3 Adapter for HPE P26256-B21
Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE P26269-B21
Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE P10115-B21
Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE P10106-B21
Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE P42041-B21
Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter for HPE P22767-B21
P26269-B21 P10106-B21 P42041-B21 P22767-B21
4 LFF (P52765-B21) 35C 35C 35C 35C
8 SFF (P52766-B21) 35C 35C 35C 35C
12 LFF (P52767-B21) 35C 35C 35C 35C
GPU Dense (P61218-B21) with 1 Single Wide or 1 25C 35C 35C 25C
GPU Dense (P61218-B21) 25C 35C 35C 25C
with up to 2 Single Wide or 1 Double Wide GPU in front
GPU Dense (P61218-B21) 25C 35C 35C 25C
with 2 Double Wide or 4 Single Wide GPU in the front
Fibre Channel HBA

HPE SN1610E 32Gb 1-port Fibre Channel Host Bus Adapter R2J62A
HPE SN1610E 32Gb 2-port Fibre Channel Host Bus Adapter R2J63A
HPE SN1610Q 32Gb 1-port Fibre Channel Host Bus Adapter R2E08A
HPE SN1610Q 32Gb 2-port Fibre Channel Host Bus Adapter R2E09A
Notes: PCIe 3.0 x8// FH or LP for SN1610Q/1610E
HPE SN1700E 64Gb 1-port Fibre Channel Host Bus Adapter R7N77A
HPE SN1700E 64Gb 2-port Fibre Channel Host Bus Adapter R7N78A
HPE SN1700Q 64Gb 1-port Fibre Channel Host Bus Adapter R7N86A
HPE SN1700Q 64Gb 2-port Fibre Channel Host Bus Adapter R7N87A
Notes: PCIe 4.0 x8// FH or LP for SN1700QE 1-port and 2-port
Page 39
Core Options
HPE InfiniBand
HPE 100Gb 1-port OP101 QSFP28 x16 PCIe Gen3 with Intel Omni-Path Architecture Adapter 829335-B21
HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe4 x16 MCX653105A-ECAT Adapter P23665-B21
HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe4 x16 MCX653106A-ECAT Adapter P23666-B21
Notes:
− Recommended ambient temperature with High-Performance Fan Kit (P48908-B21)
− *Conditional support, with DAC (direct attach copper) cable only.
829335-B21 P23665-B21 P23666-B21

4 LFF (P52765-B21) 35C 35C 25C
8 SFF (P52766-B21) 35C 35C 25C
12 LFF (P52767-B21) 35C 35C 25C
GPU Dense (P61218-B21) with 1 Single Wide or 25C
1 Double Wide GPU in front
GPU Dense (P61218-B21) 35C 35C 25C
with up to 2 Single Wide GPUs in front
GPU Dense (P61218-B21) 25C 25C 25C*
with 2 Double Wide or 4 Single Wide GPU in the
front
HPE I/O Expansion Options

Notes:
− Slot 1: The Primary Riser shipping default in the CTO server is a x16 FHHL.
− Slot 2: The Secondary Riser in the CTO server is optional x16 FHHL.
Risers
Part number Description Bus width (Gen5 lanes)
Primary Secondary Slot 1 Slot 2
P52753-B21 HPE DL320 Gen11 x16 FHHL Riser Kit D O x16 x16
Notes:
− D = Default on chassis; O = Optional; N = not supported or slot/connector not present.
− If the Secondary riser is not selected, then the Max PCIe card selection is limited to Qty=1. This is inclusive of all PCIe
categories and sub-categories.
HPE Power Supplies

HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less
installation into HPE ProLiant Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power
output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power
waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
Notes:
− Before making a power supply selection, it is highly recommended that the HPE Power Advisor is run to determine the
right size power supply for your server configuration. The HPE Power Advisor is located at:
https://poweradvisorext.it.hpe.com/?Page=Indexv
− HPE ProLiant servers ship with an IEC-IEC power cord for rack mounting with Power Distribution Units (PDUs). Visit
HPE Power Cords and Cables for a full list of optional power cords.
− Mixing of Power supplies is NOT allowed.
− Please refer to “Factory Configuration Setting” section regarding “HPE CE Mark Removal FIO Enablement Kit
(P35876-B21)” for non- EU Erp Lot 9 configuration.
Page 40
Core Options
− Flex Slot Platinum Plus power supplies support up to 94% power efficiency and include a C-14 power inlet connector
that can support HPE Power Discovery Services (blue connector).
− European Union Erp Lot 9 Regulation.Beginning on January 1st, 2024, units sold into the European Union (EU),
European Economic Area (EEA), the United Kingdom, or Switzerland must include more efficient AC power supplies:
94% for multi-output and 96% for single output.
− HPE Flexible Slot power supplies are single-output, and part numbers 865438-B21, P03178-B21, and P44712-B21
are 96% efficient, thus meeting requirements.
− HPE is on target to fulfil compliant systems ahead of time and will begin enforcing these requirements in advance to
satisfy requests with the current power supplies by the set deadline.
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit 865408-B21
HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit P03178-B21
Notes: Only supports high line voltage (200VAC to 240VAC).
HPE 1800W-2200W Flex Slot Titanium Hot Plug Power Supply Kit P44712-B21
HPE 1600W Flex Slot -48VDC Hot Plug Power Supply Kit P17023-B21
Notes: Requires selection of HPE 1600W DC PSU power lug option kit or HPE 1600W DC PSU Power Cable Kit.
HPE 1600W -48VDC Power Cable Lug Kit P36877-B21
Cooling Options
HPE ProLiant DL3X0 Gen11 1U Standard Fan Kit P48907-B21
Notes: Standard Fan Kit Includes 5 fans.
HPE ProLiant DL3X0 Gen11 1U High Performance Fan Kit P48908-B21
Notes:
− High Performance Fan Kit Includes 7 fans.
− High Performance Fans required for processors with a TDP to or greater than 185W
HPE ProLiant DL3X0 Gen11 1U 2P Standard Fan Kit P54697-B21
Notes: 2P Standard Fan Kit Includes 2 fans.
HPE ProLiant DL3X0 Gen11 1U Standard Heat Sink Kit P48904-B21
HPE ProLiant DL320 Gen11 Performance Heat Sink Kit P52756-B21
Notes: Performance Heat Sink Required for processors with a TDP to or greater than 185W.
HPE Computation and Graphics Accelerators

NVIDIA L4 24GB PCIe Accelerator for HPE S0K89C
Notes:
− For best performance across common workloads, HPE recommends system main memory at least twice
the memory of all GPU.
− Requires selection of High Performance Fan kit. This rule is not applicable for GPU CTO Server
− If GPU is selected with GPU CTO server then it does not occupy PCIe slot. This must be considered for
total PCIe selection
− Mixing of GPU is not allowed
− If Qty=1 Single Wide GPU is selected with GPU CTO Server then 'GPU 4xDC NVMe FIO Kit' or '2 GPU FIO
Enable Kit' or '4SW GPU FIO Enable Kit' must be selected
− If Qty=2 Single Wide GPU is selected with GPU CTO server then '2 GPU FIO Enable Kit' or '4SW GPU FIO
Enable Kit' must be selected
− If Qty=3 or more GPU is selected then '4SW GPU FIO Enable Kit' must be selected
Page 41
Core Options
− 4SW GPU FIO Enable Kit requires selection of Single Wide GPU
NVIDIA A16 64GB PCIe Non-CEC Accelerator for HPE R8T26C
Notes:
− If Qty=2 Double Wide GPU is selected with GPU CTO Server then ‘2 GPU FIO Enable Kit’ must be selected
− If Qty=1 Double Wide GPU is selected with GPU CTO Server then ‘GPU 4xDC NVMe FIO Kit’ or ‘2 GPU FIO
Enable Kit’ must be selected
− Supported only with GPU CTO Server
− Max=2
− If Qty=1 of A16 GPU is selected, then Primary GPU 8p Power Cable Kit (P62201-B21) must be selected.
− If Qty=2 of A16 GPU is selected, then Primary GPU 8p Power Cable Kit (P62201-B21) and Sec GPU 8p
Power Cable Kit (P62203-B21) must be selected.
− If 4SW GPU FIO Enable Kit or Qty=2 of Double wide GPU is selected then this option cannot be selected
NVIDIA L40S 48GB PCIe Accelerator S2L70C
Notes:
− If Qty=2 Double Wide GPU is selected with GPU CTO Server then ‘2 GPU FIO Enable Kit' must be selected
− If Qty=1 Double Wide GPU is selected with GPU CTO Server then 'GPU 4xDC NVMe FIO Kit' or '2 GPU FIO
− Warning: "For best performance across common workloads, HPE recommends system main memory at
least twice the memory of all GPU."
− If GPU is selected with GPU CTO server then it does not occupy PCIe slot on Primary or Secondary riser.
This must be considered for total PCIe selection
− Max=2
− If 4516Y+ processor is selected with 4SW GPU FIO Enable Kit or Qty=2 of Double wide GPU, then High
performance heat sink must be selected and defaulted
− If Qty=1 of L40s GPU is selected then Prim GPU 16p Adv Pwr Kit must be selected
− If Qty=2 of L40s GPU is selected then Prim GPU 16p Adv Pwr Kit and Sec GPU 16p Adv Pwr Kit must be
selected
− These processors (6530,8581V,6554S) and L40s GPU cannot be selected together
− 128GB DIMM and L40s GPU cannot be selected together
NVIDIA L40 48GB PCIe Accelerator for HPE S0K90C
Notes:
− If Qty=2 Double Wide GPU is selected with GPU CTO Server then '2 GPU FIO Enable Kit' must be selected
− If Qty=1 Double Wide GPU is selected with GPU CTO Server then 'GPU 4xDC NVMe FIO Kit' or '2 GPU FIO
− If GPU is selected with GPU CTO server then it does not occupy PCIe slot. This must be considered for
total PCIe selection
− Max=2
− If Qty=1 of L40 GPU is selected, then Prim GPU 16p Power Cable Kit (P62205-B21) must be selected.
− If Qty=2 of L40 GPU is selected, then Primary GPU 16p Power Cable Kit (P62205-B21) and Sec GPU 16p
Power Cable Kit (P62207-B21) must be selected.
Page 42
Core Options

GPU Support Ambient Temperature Fan Kit

up to 2 L4 or 1 L40/A16 - Front Up to 35C High Performance Fan kit
up to 2 L4 - Rear Up to 25C High Performance Fan kit
2 L40/A16 or 4 L4 – Front Up to 25C High Performance Fan kit
Software as a Service Management

HPE GreenLake for Compute Ops Management
Base SKU
HPE GreenLake for Compute Ops Management Enhanced 3-year Upfront ProLiant SaaS R7A11AAE
Upgrade SKUS
HPE OneView
Notes: For customers purchasing HPE GreenLake for Compute Ops Management, without a hardware purchase or a BTO
purchase, use this base SKU within ASQ order:
HPE GreenLake for Compute Ops Management Base SaaS R6Z73AAE
For more information, visit the HPE GreenLake for Compute Ops Management QuickSpecs:
https://www.hpe.com/psnow/doc/a50004263enw
Supported Servers – CTO only. No OEM. – Complete list can be found here: Latest Supported Server List:
https://www.hpe.com/info/com-supported-servers
Page 43
Additional Options
OS Boot Device
HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device P48183-B21
HPE ProLiant DL320 Gen11 NS204i-u NVMe OS Boot Device Cable Kit P52786-B21
HPE ProLiant DL320 Gen11 NS204i-u Security Lock Removal FIO Trigger System Setting P61855-B21
Notes:
− 'NS204i-u Gen11 Hot Plug Boot Opt Dev' requires the selection of 'NS204i-u cable kit' and vice versa.
− Require High-Performance Fan Kit (P48908-B21).
− HPE NS204i-u Gen11 support is limited at 25C ambient while using GPU CTO server.
− Server must use high performance fan kit when supporting NS204i-u for all CTO Configs.
− Ambient temperature for NS204-u is 25C for GPU CTO server.
HPE Storage Controllers

Storage Controllers
Notes:
− When selecting SR RAID controllers for external storage and MR RAID controllers for internal storage,
please be aware these two products use different RAID configuration tools. Therefore, there will be a RAID
configuration tool for the SR external controller and another for the MR internal controller.
− Mixing MR (Mega RAID) series internal controllers and SR (Smart RAID) series internal Controllers is not
supported.
− For more information on the HPE Gen11 Storage Controller, please refer to the following:
HPE Compute MR Gen11 Controllers Quick Spec
HPE Compute SR Gen11 Controllers Quick Spec
Page 44
Additional Options
Essential RAID Controllers

HPE Smart Array E208e-p SR Gen10 (8 External Lanes/No Cache) 12G SAS PCIe Plug-in Controller 804398-B21
Notes: This controller supports up to 8 SAS/SATA Drives (external)
For more information on the HPE Smart Array E208i-p SR Gen10 Controller, please refer to the QuickSpecs
Tri-Mode Controllers
HPE MR416i-p Gen11 x16 Lanes 8GB Cache PCI SPDM Plug-in Storage Controller P47777-B21
HPE MR416i-o Gen11 x16 Lanes 8GB Cache OCP SPDM Storage Controller P47781-B21
HPE MR216i-p Gen11 x16 Lanes without Cache PCI SPDM Plug-in Storage Controller P47785-B21
HPE MR216i-o Gen11 x16 Lanes without Cache OCP SPDM Storage Controller P47789-B21
HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller P58335-B21
HPE SR932i-p Gen11 x32 Lanes 8GB Wide Cache PCI SPDM Plug-in Storage Controller P47184-B21
Notes:
− Max 1 of PCIe internal controller can be selected per server.
− Max 2 of PCIe and OROC internal controllers can be selected per server.
− PCIe Internal controller is not supported with 4LFF CTO Server
− OROC controllers not supported with 12LFF CTO Server
− SR932i-p controller is the only controller supported with 8SFF x4 U.2 Drive cage.
− SR932i-p controller can be selected with GPU CTO server only if 8EDSFF drive cage is selected.
− If any controllers are selected, then "HPE 96W Smart Stg Li-ion Batt 145mm Kit" or "HPE Smart Hybrid
Capacitor w/ 145mm Cable" must be selected. Vice versa.
− Internal MR-series and Internal SR-series controllers cannot be selected together. Mega RAID Tools cannot
be used to script and configure Smart RAID (formerly known as Smart Array) controllers used on HPE
Gen9/10/10 Plus/11 servers.
2SFF x4 U.3 drive cage, then one controller is enough to support both the drive cages with the selection of
'8SFF cable kit' and '2SFF TM cable kit.'
− If the 8SFF Drive cage is selected with PCIe Internal controller, then the '8SFF TM Cable Kit' must be
selected.
− If the 8SFF Drive cage is selected with OROC controller, then '8SFF OROC Cable' must be selected.
− If 8SFF x1 U.3 Drive cage is selected and no Internal controller is selected, then the drive cage will be
connected to Direct attach and support SATA Drives only.
− If 8SFF x1 U.3 Drive cage and 2SFF x4 U.3 Drive cage is selected along with Qty=1 of
MR216i/MR416i/SR416i/SR932i controller, then 8SFF cable kit OR/AND 2SFF TM cable kit must be
selected
− If 8SFF x4 U.3 Drive cage kit is selected and no Internal controller is selected, then the drive cage will be
connected to Direct attach and support NVMe U.3 Drives only.
− If the 2SFF Drive cage is selected with PCIe Internal controller or OROC controller, then the '2SFF TM Cable
Kit' must be selected.
− If 2SFF U.3 Drive cage is selected and no Internal controller is selected, then the drive cage will be connected
to direct attach and supports either Qty=2 of NVMe U.3 drive or SATA drives.
− If 8SFF x4 U.3 Drive cage is selected with 2SFF U.3 drive cage and no Internal controller is selected, then
2SFF U.3 drive cage can support SATA drives only.
− If 8SFF x4 Drive cage and 2SFF drive cage is selected with Qty=1 of Internal controller, then '8SFF cable kit'
or '2SFF TM cable kit' must be selected
− If 8SFF x4 Drive cage and 2SFF drive cage is selected with Qty=2 of Internal controller, then both '8SFF
cable kit' and '2SFF TM cable kit' must be selected
cable kit' must be selected.
Page 45
Additional Options
− If SR932i-p is selected with the 8SFF x4 drive cage, the additional 2SFF drive cage will need an extra
controller or direct attach.
− MR416i-p is the only controller supported with the GPU Dense CTO server with 4SFF drive cage.
− If SR932i-p/MR416i-p/Gen5 Retimer card is selected along with GPU CTO server then secondary riser must be
selected.
− SR932i-p controller can be selected with GPU CTO server only if 8EDSFF drive cage is selected.
− CD7 EDSFF drives requires selection of SR932i-p controller.
− If 8EDSFF drive cage is selected with SR932i-p controller, then 'SR932i-p NVMe Cable Kit' must be selected
and defaulted.
− In GPU CTO Server, Mixing of MR416i-p/ Gen5 Retimer card/ SR932i-p controllers are not allowed.
Software RAID
Intel® Virtual RAID on CPU (Intel® VROC) Standard Software FIO for HPE S0E37A
Notes:
− Requires UEFI, not supported on Legacy Mode.
− For NVMe SSDs only, no PCIe card support.
− Supports RAID 0/1/10
Intel Virtual RAID on CPU Standard E-RTU for HPE S0E38AAE
Notes:
− Supports RAID 0/1/10.
− Similar to Intel Virtual RAID on CPU Standard FIO Software for HPE (S0E37A) but intended for field
deployments (BTO).
Intel Virtual RAID on CPU Premium FIO Software for HPE R7J57A
Notes:
− Supports RAID 0/1/5/10
Intel Virtual RAID on CPU Premium E-RTU for HPE R7J59AAE
Notes:
− Supports RAID 0/1/5/10.
− Similar to Intel Virtual RAID on CPU Premium FIO Software for HPE (R7J57A) but intended for field
deployments (BTO).
NVMe Adapter
HPE DL385 Gen10 Plus 12Gb NVMe 1-port Adapter P25526-B21
HPE DL385 Gen10 Plus 12Gb NVMe 2-port Adapter P25527-B21
Notes: The naming is based on HPE ProLiant DL385 Gen10 Plus. However, this option incompatible with HPE
ProLiant DL320 Gen11 as well.
Page 46
Additional Options
HPE Cable Kits

Notes: Some options may not be integrated at the factory. To ensure only valid configurations are ordered,
Hewlett Packard Enterprise recommends using an HPE-approved configurator. Contact your local sales
representative for additional information.
HPE ProLiant DL320 Gen11 8SFF Tri-Mode Cable Kit P52775-B21
HPE ProLiant DL320 Gen11 Retimer Card Cable Kit P52777-B21
HPE ProLiant DL320 Gen11 8SFF OROC Cable Kit P52780-B21
HPE DL320 Gen11 10LFF Direct Cable Kit P59459-B21
HPE DL320 Gen11 12LFF TM Cable Kit P60892-B21
Notes: Customers can self-install the 12LFF tri-mode cable kit. However, due to the complexity involved,
HPE recommends customers to call HPE service.
HPE ProLiant DL320 Gen11 2x MR416i-p 8SFF Controller Cable Kit P66963-B21
Notes:
− Max=1 of 8SFF Cable kit can be selected.
− Not Supported with GPU CTO Server.
− If 8SFF x4 U.3 drive cage is selected along with Qty=2 of MR416i-p then 8SFF 2x MR416i-p Controller
Cable Kit must be selected.
− 8SFF 2x MR416i-p Controller Cable Kit Requires selection of 8SFF x4 U.3 drive cage and Qty=2 of
MR416i-p controller.
− If 8SFF x4 U.3 drive cage and 2SFF U.3 drive cage is selected along with Qty=2 of MR416i-p controller
and 8SFF 2x MR416i-p Controller Cable Kit and no other internal controller is selected then 2SFF x4 U.3
drive cage will be connected to Direct attach and supports either Qty=2 of NVMe U.3 drives or SATA
drives.
− Max=1 is not applicable to MR416i-p controller if selected along with 8SFF x4 U.3 drive cage and 8SFF
2x MR416i-p Controller Cable Kit . Max=2 of MR416i-p must be selected for this combination.
HPE ProLiant DL320 Gen11 LFF Optical Cable Kit P54641-B21
Notes: Required if Optical Drive is selected with 4LFF CTO Server.
HPE ProLiant DL320/DL380 Gen11 PCIe Gen5 Retimer Card P48833-B21
Notes:
− If 4SFF U.3 drive cage is selected with Gen5 Retimer card, then 'HPE DL320 Gen11 4SFF TM Cable Kit'
must be selected and defaulted.
− In GPU CTO Server, Mixing of MR416i-p/ Gen5 Retimer card/ SR932i-p controllers are not allowed.
− RAID is allowed on EDSFF drives only if Premium VROC or Standard VROC or Gen5 Retimer card is
selected as Primary controller.
− If 8EDSFF Drive cage is selected with Gen5 Retimer card then HPE DL320 Gen11 2xType-p NVMe Cable
Kit must be selected and defaulted.
− If 8EDSFF Drive cage is selected with Gen5 Retimer card, then Qty=2 Gen5 Retimer card must be
selected and defaulted.
− CD7 EDSFF drives requires selection of Gen5 Retimer card or SR932i-p controller.
− If SR932i-p/MR416i-p/Gen5 Retimer card is selected along with GPU CTO server then secondary riser
must be selected.
Page 47
Additional Options
HPE ProLiant DL320 Gen11 GPU 4x Direct Connected NVMe FIO Enablement Kit P62181-B21
Notes:
− If 8EDSFF or 4SFF Drive cage is selected and MR416i-p is not selected, then "HPE DL320 G11 GPU 4xDC
NVMe FIO Kit" must be selected.
− If 8EDSFF Drive cage is selected with "HPE DL320 G11 GPU 4xDC NVMe FIO Kit" then drive cage will be
connected to Direct attach and can support Max=4 EDSFF drives only
− If 4SFF U.3 Drive cage is selected with "HPE DL320 G11 GPU 4xDC NVMe FIO Kit" then drive cage will be
connected to direct attach and support Max=4 NVMe U.3 drives only
− Cannot be selected if MR416i-p controller is selected.
− Max=1 of 'GPU 4xDC NVMe FIO Kit' or '4SFF TM Cable Kit' or '2xType-p NVMe Cable Kit' can be selected
− If Qty=1 of GPU is selected with GPU CTO Server, then 'GPU 4xDC NVMe FIO Kit' or '2 GPU FIO Enable Kit'
must be selected
− In GPU CTO Server if ‘GPU 4xDC NVMe FIO Kit' then the first GPU card selected will be installed in the
front of the server. This should not be considered for total PCIe selection.
HPE ProLiant DL320 Gen11 2 GPU FIO Enablement Kit P62197-B21
Notes:
− If Qty=1 Double Wide GPU is selected with GPU CTO Server, then 'GPU 4xDC NVMe FIO Kit' or '2 GPU FIO
Enable Kit' must be selected.
− If Qty=2 Double Wide GPU is selected with GPU CTO Server, then '2 GPU FIO Enable Kit' must be selected
− Can not be selected with any other GPU enablement kit.
− If '2 GPU FIO Enable Kit' is selected along with 4SFF Drive cage, then MR416i-p controller or Gen5 Retimer
card and 4SFF TM Cable Kit must be selected.
− If Qty=1 Single Wide GPU is selected with GPU CTO Server, then 'GPU 4xDC NVMe FIO Kit' or '2 GPU FIO
Enable Kit' or '4SW GPU FIO Enable Kit' must be selected.
If Qty=2 Single Wide GPU is selected with GPU CTO server then '2 GPU FIO Enable Kit' or '4SW GPU FIO
Enable Kit' must be selected.
HPE DL320 Gen11 Serial Port Enable Kit P58829-B21
Notes: Max = 1
HPE DL320 Gen11 Primary GPU 8p Power Cable Kit P62201-B21
HPE DL320 Gen11 Secondary GPU 8p Power Cable Kit P62203-B21
HPE DL320 Gen11 Primary GPU 16p Power Cable Kit P62205-B21
HPE DL320 Gen11 Secondary GPU 16p Power Cable Kit P62207-B21
Notes:
− P62205-B21 & P62207-B21 require selection of L40 GPU.
− If Qty=1 of L40 GPU is selected, then Primary GPU 16p Power Cable Kit (P62205-B21) must be selected.
− If Qty=2 of L40 GPU is selected, then Primary GPU 16p Power Cable Kit (P62205-B21) and Secondary
GPU 8p Power Cable Kit (P62207-B21) must be selected.
− P62201-B21 & P62203-B21 require selection of A16 GPU.
− If Qty=1 of A16 GPU is selected, then Primary GPU 8p Power Cable Kit (P62201-B21) must be selected.
− If Qty=2 of A16 GPU is selected, then Primary GPU 8p Power Cable Kit (P62201-B21) and Secondary GPU
8p Power Cable Kit (P62203-B21) must be selected.
Page 48
Additional Options
HPE ProLiant DL320 Gen11 Primary GPU 16-pin Advanced Power Cable Kit P69104-B21
HPE ProLiant DL320 Gen11 Secondary GPU 16-pin Advanced Power Cable Kit P69106-B21
Notes:
− If Qty=1 of L40s GPU is selected then Prim GPU 16p Adv Power Kit must be selected.
− If Qty=2 of L40s GPU is selected then Prim GPU 16p Adv Power Kit and Sec GPU 16p Advanced Power Kit
must be selected.
− Requires selection of L40s GPU
Notes:
− If 4SFF U.3 drive cage is selected with MR416i-p controller, then 'HPE DL320 Gen11 4SFF TM Cable Kit.'
− Requires selection 4SFF U.3 Drive cage.
− Max=1 of 'GPU 4xDC NVMe FIO Kit' or '4SFF TM Cable Kit' can be selected.
HPE ProLiant DL320 Gen11 2x Type-p NVMe Cable Kit P62183-B21
Notes:
− Requires selection of Gen5 Retimer card.
− Requires selection of 8EDSFF Drive cage.
− Max=1 of these kits is allowed for selection GPU 4xDC NVMe FIO Kit or 4SFF TM Cable Ki or Gen5 Retimer
cable
− If 8EDSFF Drive cage is selected with Gen5 Retimer card then HPE DL320 Gen11 2xType-p NVMe Cable
Kit must be selected and defaulted
HPE ProLiant DL320 Gen11 SR932i-p NVMe Cable Kit P62185-B21
Notes:
− Requires selection of 8EDSFF Drive cage.
− Max=1 of these kits is allowed for selection GPU 4xDC NVMe FIO Kit or 4SFF TM Cable Ki or Gen5 Retimer
cable
− If 8EDSFF drive cage is selected with SR932i-p controller, then 'SR932i-p NVMe Cable Kit' must be
selected and defaulted.
− Requires selection of SR932i-p controller
RAID Settings
HPE RAID 0 Drive 1 FIO Setting 339777-B21
HPE Raid 5 w/SP Drive 1 FIO Setting 339780-B21
HPE RAID FIO Advanced Data Guarding Option 339781-B21
Notes:
− General RAID rules:
ο Only a single set of RAID will be offered and will only be applied to all applicable drives installed in a
server.
ο RAID requires the selection of a Smart Array controller and a specific number of matching drives. (i.e.,
same part number).
ο If RAID is selected, and only SAS or SATA, or NVMe drives are configured, then all drives must be the
same part number. (i.e., matching drives).
ο If RAID is selected and both SAS and SATA drives are configured, only the SAS drives will be used in
the RAID set. (SAS drives must be the same part number; SATA drives can vary in part numbers).
Page 49
Additional Options
ο If RAID is selected and NVMe, SAS, and SATA drives are configured, then only the NVMe drives will
be used in the RAID set. (NVMe drives must be the same part number; SAS & SATA drives can vary in
part numbers).
ο RAID must be selected if both Factory Installed OS and Smart Array controller (embedded or
otherwise) are present.
ο (vii) RAID 0 requires at least 1 drive.
ο RAID 1 requires at least 2 or even number of drives.
ο RAID 1 with Spare requires at least 3 drives.
ο RAID 5 requires at least 3 drives.
ο RAID 5 with Spare requires at least 4 drives.
ο RAID 6 requires at least 4 drives.
− If SR932i-p/ MR416i-p/ MR416i-o/ MR408i-o is the Primary controller, then all RAID levels are allowed.
− If MR216i-o/MR216i-p/ Standard VROC is the primary controller, then only the following RAID levels are
allowed: 0, 1.
− If Premium VROC is the primary controller, then the following RAID levels are allowed: 0, 1, 5.
− If Direct Attach is the Primary controller, then RAID is NOT allowed.
− If RAID is selected in a configuration with VROC and internal controller, then Customer Defined RAID
Setting (389692-B21) must be selected.
− HPE Recommends using the below standard RAID Settings,
ο 339777-B21 HPE RAID 0 Drive 1 FIO Setting
ο 339780-B21 HPE RAID 5 w/SP Drive 1 FIO Setting
HPE Customer Defined RAID Setting Service 389692-B21
Notes:
− The following RAID rules do not apply:
ο Max of 1 RAID level per server.
ο All integrated hard drives must match.
ο Minimum drive quantity requirement for each RAID level.
ο RAID level must be selected if Factory Installed OS is present and Smart Array SAS controller
(embedded or otherwise) is the primary controller.
− At least 1 hard drive must be on order.
− Preinstalled OS must be on order.
− A Customer Intent Document (CID) must be supplied if this part number is ordered.
− This Customer Intent Document should include all details about the desired RAID custom configuration
(This includes Drive part numbers and quantities, RAID levels desired, which drives should be applied to
each RAID level, and if a preinstalled OS has been ordered - which RAID set it should be installed on).
Embedded Management
HPE iLO Common Password FIO Setting
Notes:
− Customers who want to choose their own custom iLO default password should use the HPE Factory
Express Integration Services.
Page 50
Additional Options
HPE iLO Advanced

HPE iLO Advanced Electronic License with 1yr Support on iLO Licensed Features E6U59ABE
HPE iLO Advanced 1-server License with 1yr Support on iLO Licensed Features 512485-B21
HPE iLO Advanced Flexible Quantity License with 1yr Support on iLO Licensed Features 512486-B21
HPE iLO Advanced AKA Tracking License with 1yr Support on iLO Licensed Features 512487-B21
HPE iLO Advanced Electronic License with 3yr Support on iLO Licensed Features E6U64ABE
HPE iLO Advanced 1-server License with 3yr Support on iLO Licensed Features BD505A
HPE iLO Advanced Flexible Quantity License with 3yr Support on iLO Licensed Features BD506A
HPE iLO Advanced AKA Tracking License with 3yr Support on iLO Licensed Features BD507A
HPE Converged Infrastructure Management Software
Notes: Licenses ship without media. The HPE OneView Media Kit can be ordered separately or downloaded.
HPE Security
Notes:
− Customers who want to choose their own custom iLO default password should use the HPE Factory Express
Integration Services.
HPE Bezel Lock Kit 875519-B21
Notes: Requires the bezel kit (P50450-B21).
HPE ProLiant Gen11 1U Common Bezel Kit P50450-B21
HPE ProLiant DL320 Gen11 Intrusion Detection Cable Kit P55417-B21
Optional Upgrades
HPE 96W Smart Storage Lithium-ion Battery with 145mm Cable Kit P01366-B21
HPE Smart Storage Hybrid Capacitor with 145mm Cable Kit P02377-B21
Notes: Provides backup power for multiple HPE storage controllers or other devices.
HPE Tape Backup

For the complete range of tape drives, autoloaders, libraries, and media, see:
https://www.hpe.com/us/en/storage/storeever-tape-storage.html For hardware and software compatibility of Hewlett
Packard Enterprise tape backup products http://www.hpe.com/storage/BURAcompatibility
HPE Racks
• Please see the HPE Advanced Series Racks QuickSpecs for information on additional racks options and rack
specifications. HPE G2 Advanced Series Racks
• Please see the HPE Enterprise Series Racks QuickSpecs for information on additional racks options and rack
specifications. HPE G2 Enterprise Series Racks
Page 51
Additional Options
HPE Power Distribution Units (PDUs)

• Please see the HPE Basic Power Distribution Units (PDU) QuickSpecs for information on these products and their
specifications.
• Please see the HPE Metered Power Distribution Units (PDU) QuickSpecs for information on these products and their
specifications. Please see the HPE Intelligent Power Distribution Unit (PDU) QuickSpecs for information on these
products and their specifications.
• Please see the HPE Metered and Switched Power Distribution Units (PDU) QuickSpecs for information on these
Page 52
Additional Options
Uninterruptible Power Systems (UPS)

• To learn more, please visit the HPE Uninterruptible Power Systems (UPS) web page.
• Please see the HPE Direct Flow Three Phase Uninterruptible Power System QuickSpecs for information on these
• Please see the HPE Line Interactive Single-Phase UPS QuickSpecs for information on these products and their
specifications.
HPE Rack Options

Please see the HPE KVM Switches web page for information on these products and their specifications.
Easy Install Rail Kits

Easy Install rail kits contain telescoping rails, which allow for in-rack serviceability.
To assist in installing the server into the rack, an optional installation tool is available by contacting your local services
representative.
Notes:
− Hewlett Packard Enterprise recommends that a minimum of two people are required for all Rack Server installations.
Please refer to your installation instructions for proper tools and the number of people to use for any installation.
− HPE rail kits are designed to work with HPE racks in compliance with industry standard EIA-310-E. In the event a
customer elects to purchase a third-party rack for use with an HPE rail kit, any such use is at customer’s own risk.
HPE makes no express or implied warranties with respect to such third-party racks and specifically disclaims any
implied warranties of merchantability and fitness for a particular purpose. Furthermore, HPE has no obligation and
assumes no liability for the materials, design, specifications, installation, safety, and compatibility of any such third-
party racks with any rail kits, including HPE rail kits.
HPE DL325 Gen10 Plus Cable Management Arm P18546-B21
Notes: DL325 Gen10+ CMA requires the selection of EI Rail Kit 9.
HPE ProLiant DL300 Gen10 Plus 1U Cable Management Arm for Rail Kit P26489-B21
Notes:
− Not supported with 12LFF CTO Server
− DL300 Gen10+ 1U CMA for Rail Kit' requires the selection of 'EI Rail Kit 1' or 'Easy Install Rail 2 Kit'.
HPE Easy Install Rail 1 Kit P52349-B21
Notes:
− Supported only with 8SFF CTO Server.
HPE DL3XX Gen11 Easy Install Rail 2 Kit P52351-B21
Notes:
− Supported only with 4LFF CTO Server.
HPE Easy Install Rail 9 Kit P52353-B21
Notes:
− Supported only with 12LFF CTO Server.
− DL325 Gen10+ CMA requires the selection of EI Rail Kit 9.
Page 53
Additional Options
HPE USB and SD Options

Notes: In vSphere 7.0, VMware made changes that impact the use of an SD Card/USB media as a standalone boot device and
will be removing support for them after version 7.x.
SD Card/USB media can still be used as a standalone boot option through all 7.x releases via published Customer Advisory
Usage of SD Card/USB Devices As Standalone Boot Devices Has Changed Due to System Storage Changes For VMware
ESXi 7.0 (Or Later).
For any major release beyond VMware ESXi 7.x, VMware will require M.2 or another local persistent device as the standalone
boot option.
HPE Support Service

Installation & Startup Services
HPE Proliant DL/ML Install Service U4554E
HPE Proliant DL/ML Startup Service U4555E
Tech Care
HPE 3 Year Tech Care Essential DL320 Gen11 HW Service H93M2E
HPE 3 Year Tech Care Essential wDMR DL320 Gen11 HW Service H93M3E
HPE 5 Year Tech Care Essential DL320 Gen11 HW Service H93P6E
HPE 5 Year Tech Care Essential wDMR DL320 Gen11 HW Service H93P7E
Page 54
Memory
Memory Population guidelines
HPE ProLiant DL320 Gen10 Plus
HPE ProLiant Gen10 Plus 16 slot per CPU DIMM population order
DIMM population order
DIMM slot 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 DIMM 10
2 DIMMs1 3 10
4 DIMMs 1
3 7 10 14
6 DIMMs 3 5 7 10 14 16
8 DIMMs1,2 1 3 5 7 10 12 14 16
12 DIMMs 1 2 3 5 6 7 10 11 12 14 15 16
16 DIMMs1,2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Notes:
− Cells without entries represent configurations not supported, and if populated, the server may result in non-optimal
memory performance or other unexpected behavior.
− 1 Support Hemi (hemisphere mode).
− 2 Support Software Guard Extensions (SGX).
General Memory Population Rules and Guidelines

• Install DIMMs only if the corresponding processor is installed.
• If only one processor is installed in a two-processor system, only half of the DIMM slots are available.
• To maximize performance, it is recommended to balance the total memory capacity between all installed processors.
• When two processors are installed, balance the DIMMs across the two processors.
• White DIMM slots denote the first slot to be populated in a channel.
• Mixing of DIMM types (UDIMM, RDIMM, and LRDIMM) is not supported.
• The maximum memory speed is a function of the memory type, memory configuration, and processor model.
• The maximum memory capacity is a function of the number of DIMM slots on the platform, the largest DIMM capacity
qualified on the platform, and the number and model of installed processors qualified on the platform.
• For details on the HPE Server Memory Options Population Rules, visit:
http://www.hpe.com/docs/memory-population-rules
• To realize the performance memory capabilities listed in this document, HPE DDR5 Smart Memory is required. For
additional information, please see the HPE DDR5 Smart Memory QuickSpecs.
Notes: The maximum memory speed is a function of the memory type, memory configuration, and processor model.
For details on the HPE Server Memory speed, visit: https://www.hpe.com/docs/server-memory
Page 55
Storage
4 LFF device bay numbering
8 SFF drive bay numbering
8 SFF + 2 SFF drive bay numbering
12 LFF drive bay positioning
12 LFF drive bay – Box1 numbering
12 LFF drive bay - Box3/Box5 numbering
Page 56
Technical Specifications
System Unit
Dimensions (Height x Width x Depth)
8 SFF
• 4.28 x 43.46 x 60.51 cm
1.69 x 17.11 x 23.82 in
4 LFF CTO Server
• 4.28 x 43.46 x 66.47 cm
1.69 x 17.11 x 26.17 in
12 LFF CTO Server
• 4.28 x 43.46 x 99.51 cm
1.69 x 17.11 x 39.18 in
GPU Dense CTO
• 4.28 x 43.46 x 77.42cm
1.69 x 17.11 x 30.48 in
Weight (approximate)
• 8+2 SFF minimum
− 12.00 kg (26.45 lb): One Drive, one DIMM, one PCIe card, one processor, one heatsink, one power supply, five fans,
and two fan blanks.
• 8+2 SFF maximum
− 16.71 kg (36.81 lb): Ten drives, sixteen DIMMs, two PCIe cards. one processor, one heatsink, two power supplies, and
seven fans.
• 4 LFF minimum
− 13.20 kg (29.10 lb): One drive, one DIMM, one PCIe card, one processor, one heatsink, one power supply, five fans,
and two fan blanks.
• 4 LFF maximum
− 17.70 kg (39.02 lb): Four drives, sixteen DIMMs, and two PCIe standup cards. One processor, one heatsink, two
power supplies, and seven fans.
• 12 LFF minimum
and two fan blanks.
• 12 LFF maximum
− 29.60 kg (65.23 lb): Twelve drives, sixteen DIMMs, two PCIe cards. one processor, one heatsink, two power supplies,
and seven fans.
• GPU Dense minimum
and two fan blanks.
• GPU Dense maximum
− 20.90 kg (46.08 lb): Eight drives, sixteen DIMMs, two PCIe cards. one processor, one heatsink, two power supplies,
and seven fans.
Input Requirements (per power supply)

Rated Input Voltage
• 1800-2200W (Titanium):
• 1600W (-48 VDC):
• 1600W (Platinum):
• 1000W (Titanium):
Page 57
• 800W (Platinum):
• 500W (Platinum): 100-240 VAC
BTU Rating
Maximum
• For 1600W (Platinum)Power Supply: 5918 BTU/hr (at 200 VAC), 5891 BTU/hr (at 230 VAC)
• For 1600W (48VDC) Power Supply: 6026 BTU/hr (at -40 VDC), 6000 BTU/hr (at -48 VDC), 5989 BTU/hr (at -72 VDC)
• For 1000W (Titanium) Power Supply: 3764 BTU/hr (at 100 VAC), 3629BTU/hr (at 200 VAC)
• For 800W (Platinum) Power Supply: 3067 BTU/hr (at 100 VAC), 2958 BTU/hr (at 200 VAC), 2949 BTU/hr (at 240 VAC)
China only
• For 500W (Platinum) Power Supply: 1999 BTU/hr (at 100 VAC), 1912 BTU/hr (at 200 VAC), 1904 BTU/hr (at 240 VAC)
for China only
Power Supply Output (per power supply)

Rated Steady-State Power
• For 1600W (Platinum)Power Supply: 1600 W (at 200 VAC to 240 VAC input), 1600 W (at 240 VDC input)
• For 1600W (48VDC) Power Supply: 1600 W (at -40 VDC to -72 VDC)
• For 1000W (Titanium) Power Supply: 1000 W (at 100 VAC to 127 VAC), 1000 W (at 200 VAC to 240 VAC input)
• For 800W (Platinum) Power Supply: 800 W (at 100 VAC to 127 VAC input), 800 W (at 100 VAC to 240 VAC input), 800
W (at 240 VDC input for China only)
• 3067 BTU/hr (at 100 VAC), 2958 BTU/hr (at 200 VAC), and 2949 BTU/hr (at 240 VAC), China only
• For 500W (Platinum) Power Supply: 500 W (at 100 - 127 VAC input), 500 W (at 100 - 240 VAC input), 500 W (100
VAC - 127 VAC input)
Maximum Peak Power
• For 1600W (Platinum)Power Supply: 1600 W (at 200 VAC to 240 VAC input), 1600 W (at 240 VDC input)
• For 1600W (48VDC) Power Supply: 1600 W (at -40 VDC to -72 VDC)
• For 1000W (Titanium) Power Supply: 1000 W (at 100 VAC to 127 VAC), 1000 W (at 200 VAC to 240 VAC input)
• For 800W (Platinum) Power Supply: 800 W (at 100 VAC to 127 VAC input), 800 W (at 100 VAC to 240 VAC input), 800
W (at 240 VDC input for China only)
• For 500W (Platinum) Power Supply: 500 W (at 100 - 127 VAC input), 500 W (at 100 - 240 VAC input), 500 W (100
VAC - 127 VAC input)
System Inlet Temperature

• Standard Operating Support
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above
sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. The maximum rate of change is 20°C/hr
(36°F/hr). The upper limit and rate of change may be limited by the type and number of options installed.
System performance during standard operating support may be reduced if operating with a fan fault or above 30°C
(86°F).
• Extended Ambient Operating Support
For approved hardware configurations, the supported system inlet range is extended to be: 5° to 10°C (41° to 50°F) and
35° to 40°C (95° to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m (1.8°F per every 574 ft) above
900 m (2953 ft) to a maximum of 3050 m (10,000 ft). The approved hardware configurations for this system are listed at
the URL: https://www.hpe.com/support/ASHRAEGen11
40°C to 45°C (104°F to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft)
above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft). The approved hardware configurations for this system are
listed at the URL: https://www.hpe.com/support/ASHRAEGen11
System performance may be reduced if operating in the extended ambient operating range or with a fan fault.
Page 58
• Non-operating
-30° to 60°C (-22° to 140°F). The maximum rate of change is 20°C/hr (36°F/hr).
Relative humidity (non-condensing)

• Operating
8% to 90% - Relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing.
• Non-operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.
Altitude
• Operating
3050 m (10,000 ft). This value may be limited by the type and number of options installed. The maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
• Non-operating
9144 m (30,000 ft). The maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Emissions Classification (EMC)

To view the regulatory information for your product, view the Safety and Compliance Information for Server, Storage, Power,
Networking, and Rack Products, available at the Hewlett Packard Enterprise Support Center:
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c03471072
Acoustic Noise
Listed are the declared mean A-Weighted sound power levels (LWA,m), declared average bystander position A-Weighted sound
pressure levels (LpAm), and the statistical adder for verification, Kv, is a quantity to be added to the declared mean A-weighted
sound power
level, LWA,m when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with
ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). The listed sound levels apply to standard shipping
configurations. Additional options may result in increased sound levels. Please have your HPE representative provide information
from the HPE EMESC website for further technical details regarding the configurations listed below.
Test case Entry 1 (BTO) 4LFF Entry 2 (BTO) SFF Mid Range (BTO) SFF Performance (BTO) SFF
Idle
LWA,m 4.7 B 4.7 B 4.9 B 4.9 B
LpAm 36 dBA 35 dBA 37 dBA 37 dBA
Kv 0.4 B 0.4 B 0.4 B 0.4 B
Operating
LWA,m 5.3 B 4.9 B 5.1 B 5.2 B
LpAm 39 dBA 36 dBA 38 dBA 40 dBA
Kv 0.4 B 0.4 B 0.4 B 0.4 B
Notes:
− The Acoustics levels presented here are generated by the test configuration only. Acoustics levels will vary depending on
system configuration. Values are subject to change without notification and are for reference only.
− The declared mean A-weighted sound power level, LWA,m, is computed as the arithmetic average of the measured.
− A-weighted sound power levels for a randomly selected sample rounded to the nearest 0,1 B.
− The declared mean A-weighted emission sound pressure level, LpA,m, is computed as the arithmetic average of the
measured A-weighted emission sound pressure levels at the bystander positions for a randomly selected sample, rounded
to the nearest 1 dB.
Page 59
− The statistical adder for verification, Kv, is a quantity to be added to the declared mean A-weighted sound power level,
LWA,m, such that there will be a 95 % probability of acceptance when using the verification procedures of ISO 9296 if no
more than 6,5 % of the batch of new equipment, has A-weighted sound power levels greater than (LWA,m + Kv).
− The quantity, LWA,c (formerly called LWAd), can be computed from the sum of LWA,m, and Kv.
− All measurements were made to conform to ISO 7779 / ECMA-74 and declared to conform to ISO 9296 / ECMA-109.
− B, dB, abbreviations for bels and decibels, respectively, where 1 B = 10 dB.
− The results in this declaration apply only to the model numbers listed above when operating and tested according to the
indicated modes and standards. A system with additional configuration components or increased operating functionality
may increase the noise emission values.
− The system under abnormal conditions may increase the noise level, and persons in the vicinity of the product [cabinet]
for extended periods should consider wearing hearing protection or using other means to reduce noise exposure.
Environment-friendly Products and Approach End-of-life Management and Recycling

Hewlett Packard Enterprise offers end-of-life product return, trade-in, and recycling programs, in many geographic areas, for
our products. Products returned to Hewlett Packard Enterprise will be recycled, recovered, or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type used by
treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard Enterprise website.
These instructions may be used by recyclers and other WEEE treatment facilities, as well as Hewlett Packard Enterprise OEM
customers who integrate and re-sell Hewlett Packard Enterprise equipment.
Page 60
Summary of Changes
Date Version History Action Description of Change

06-May-2024 Version 19 Changed Core Options section was updated.
01-Apr-2024 Version 18 Changed Standard Features, Configuration Information, Core Options and Additional
Options sections were updated
04-Mar-2024 Version 17 Changed Standard Features, Configuration Information, Core Options and Additional
05-Feb-2024 Version 16 Changed Configuration Information and Core Options sections were updated
14-Dec-2023 Version 15 Changed Overview, Standard Features, Configuration Information, Core Options and
Additional Options sections were updated
13-Nov-2023 Version 14 Changed Pre-configured Models Section was updated.
06-Nov-2023 Version 13 Changed Service and Support, Configuration Information and Additional Options
sections were updated
02-Oct-2023 Version 12 Changed Overview and Core Options sections were updated.
05-Sep-2023 Version 11 Changed Standard Features, Configuration Information, Core Options and Additional
07-Aug-2023 Version 10 Changed Standard Features,Core Options and Additional Options sections were updated
17-Jul-2023 Version 9 Changed Overview section was updated.
10-Jul-2023 Version 8 Changed Standard Features, Pre-Configured , Configuration Information and Additional
05-Jun-2023 Version 7 Changed Standard Features, Pre-Configured , Configuration Information and Additional
Options sections were updated.
01-May-2023 Version 6 Changed Standard Features, and Core Options sections were updated.
17-Apr-2023 Version 5 Changed Overview, Standard Features, and Optional Features sections were updated.
03-Apr-2023 Version 4 Changed Pre-Configured and Core Options section were updated.
06-Mar-2023 Version 3 Changed Overview, Standard Features, Configuration Information, Additional Options
and Technical Specifications sections were updated.
06-Feb-2023 Version 2 Changed Overview, Core Options, and Storage Options sections were updated.
10-Jan-2023 Version 1 New New QuickSpecs.
Page 61
Copyright
Make the right purchase decision.

Contact our presales specialists.
Get updates
© Copyright 2024 Hewlett Packard Enterprise Development LP. The information contained herein is subject
to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set
forth in the express warranty statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for
technical or editorial errors or omissions contained herein.
a50004315enw - 16919 - Worldwide - V19 - 06-May-2024
Page 62

HPE ProLiant DL320 Gen11-A50004315enw

Uploaded by

Copyright:

Available Formats

HPE ProLiant DL320 Gen11-A50004315enw

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

HPE ProLiant DL320 Gen11-A50004315enw

Uploaded by

Copyright:

Available Formats

QuickSpecs HPE ProLiant DL320 Gen11

HPE ProLiant DL320 Gen11

12 LFF Front View - 12 LFF + SAS drives shown

1. Serial number/iLO information pull tab 6. NIC Status

Front View – GPU CTO Server

Internal View – Standard for all DL320 Gen11

Rear View – Standard for all DL320 Gen11

Processors – One of the following.

Processor Suffix Description Offering

M Media Transcode Optimized around AVX frequencies to deliver better

− SST- Core Power

5th Generation Intel® Xeon® Scalable Processor Family (Platinum)

5th Generation Intel® Xeon® Scalable Processor Family (Gold 6 )

5th Generation Intel® Xeon® Scalable Processor Family (Gold 5 )

5th Generation Intel® Xeon® Scalable Processor Family (Silver)

5th Generation Intel® Xeon® Scalable Processor Family (Bronze)

4th Generation Intel® Xeon® Scalable Processor Family (Gold)

4th Generation Intel® Xeon® Scalable Processor Family (Silver)

Notes: 96 GB 4800 MT/s Memory cannot be selected if HBM or MCC die

PCIe Expansion Slots

Software RAID Controllers

­ Intel® VROC NVMe for HPE ProLiant Gen11

Intel VROC for HPE ProLiant QuickSpecs

Essential RAID Controllers

Operating Systems and Virtualization Software

HPE Server UEFI/Legacy ROM

Industry Standard Compliance

iLO RESTful API

Active Health System Viewer

iLO Amplifier Pack

RESTful Interface Tool

HPE OneView Standard

HPE GreenLake for Compute Ops Management

HPE OneView Advanced

HPE InfoSight for Servers

HPE Insight Cluster Management Utility (CMU)

Accelerator and GPU Information

One Config Simple (OCS/SCE)

Rack and Power Infrastructure

Service and Support

HPE Managed Services

HPE Complete Care Service

HPE Tech Care Service

Service and Support

HPE Lifecycle Services

Other Related Services from HPE Services:

Defective Media Retention

Service and Support

AI Powered and Digitally Enabled Support Experience

Consume IT On Your Terms

For more information

Pre-Configured models ship with the configurations below.

P57685-B21 P57686-B21 P57687-B21

Management HPE iLO 6

TPM (Trusted Platform Module)

Not certified Not certified (‑B21, ‑291 & ‑AA1)

Expansion 1 x16 FHHL PCIe Gen5; 1 OCP 3.0 Slot as standard.

Country Code Key

Smart Templates from HPE

Intel® VROC NVMe for HPE ProLiant Gen11