Cyrus X Power User Instructions

CONTENTS

IMPORTANT! Read before operating this equipment!................................................... 1

Power supply............................................................................................................................. 2
Servicing.................................................................................................................................... 2
Product service centres............................................................................................................. 2
FCC NOTICE................................................................................................................................ 3
Welcome to the world of Cyrus!....................................................................................... 4
Preparations for Installation...................................................................................................... 4
Installation............................................................................................................................... 5
Key to the rear panel drawing............................................................................................... 5
Important – read before making any audio connections........................................................... 6
Two channel or Single channel high power operation............................................................... 6
Stereo systems...................................................................................................................... 6
Audio-Visual multi-channel systems..................................................................................... 6
Input Connection....................................................................................................................... 6
Two channel (stereo) operation............................................................................................ 6
Single channel (mono) operation.......................................................................................... 6
Loudspeaker Connection........................................................................................................... 6
Fitting the speaker plugs....................................................................................................... 6
Two channel stereo speaker connections............................................................................. 6
Single channel mono speaker connections........................................................................... 6
Audio-Visual multi-channel systems..................................................................................... 6
Bi-amplification.......................................................................................................................... 7
MC-BUS connection................................................................................................................... 7
Connecting to the AC Mains Supply.......................................................................................... 8
External Power Supply - PSX-R/PSX-R2 ...................................................................................... 8
How it works......................................................................................................................... 8
OPERATION................................................................................................................................... 9
Key to the front panel drawing............................................................................................. 9
Switching On............................................................................................................................ 10
Disabling the Music Sensor................................................................................................. 10
Front panel indicators.............................................................................................................. 10
MONO Indicator.................................................................................................................. 10
TROUBLESHOOTING GUIDE....................................................................................................... 11
Fault indication system............................................................................................................ 11
Specifications.......................................................................................................................... 12
Power Supply...................................................................................................................... 12
Enclosure............................................................................................................................ 12
Audio Performance............................................................................................................. 12
Warranty.................................................................................................................................. 12
WEEE............................................................................................................................................ 12
Cyrus X Power User Instructions
IMPORTANT! Read before operating this equipment!
CAUTION: The exclamation mark is to draw your ATTACHMENTS: Do not use attachments not recommended
attention to important instructions and safety by the product manufacturer as they may cause hazards.
procedures in this manual. MOVING THE PRODUCT: A product and cart
ATTENTION: The lightning flash warns you of the combination should be moved with care. Sudden
risk of electrical shock presented by components stops, excessive force, and uneven surfaces may
inside this product. Unauthorised personnel cause the product and cart to overturn.
must not open this unit.
POWER SOURCES: This product should be operated only
WARNING: To reduce the risk of electrical shock do not from the type of power source indicated on the marking
remove any unit covers or panels. There are no user label. If you are not sure of the type of power supply to your
serviceable parts in this product. home, consult your product dealer or local power company.
WARNING: To reduce the risk of electric shock, do not For products intended to operate from battery power, or
expose this equipment to rain or moisture. other sources, refer to the operating instructions.
HEED WARNINGS: All warnings on the product and in the OVERLOADING: Never overload wall outlets, extension
operating instructions should be adhered to. cords, or integral convenience receptacles. This can result in
READ ALL THE INSTRUCTIONS: All the safety and operating an increased risk of fire or electric shock.
instructions should be read before the product is operated. POWER CORD PROTECTION: Power supply cords should be
RETAIN INSTRUCTIONS: The safety and operating routed so that they are not likely to be walked on or pinched
instructions should be retained for future reference. by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and
FOLLOW INSTRUCTIONS: All operating and use instructions
the point where they exit from the product.
should be followed.
NAKED FLAMES: No naked flame sources, such as candles,
CLEANING: Unplug this product from the mains before
must be placed on this product.
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning. LIGHTNING: For added protection for this product during
a lightning storm, or when it is left unattended or unused
WATER AND MOISTURE: Do not use this product near water
for long periods of time, unplug it from the wall outlet and
- for example, near a bath tub, wash bowl, kitchen sink, or
disconnect the antenna or cable system. This will prevent
laundry tub, in a wet basement; or near a swimming pool
damage to the product due to lightning and power-line
and the like. The product must not be exposed to dripping
surges.
or splashing and no objects filled with liquids, such as vases,
shall be placed on the product. BATTERIES: Warning : Batteries shall not be exposed to
excessive heat such as sunshine, fire or the like.
HEAT: The product should be situated away from heat
sources such as radiators, stoves, or any other products CAUTION! POLARISED CONNECTOR (CANADA and USA):
(including amplifiers) that produce heat. To prevent electrical shock, match wide blade of plug to
VENTILATION: Slots and openings in the cabinet are wide slot, fully insert. Do not alter or remove this plug if it
provided for ventilation, to ensure reliable operation of does not fit your mains power socket. Have a suitable socket
the product and to protect it from overheating and these installed by a competent electrician.
openings must not be blocked or covered. The openings ACCESS TO THE MAINS PLUG: The means to disconnect this
should never be blocked by placing the product on a bed, product from the mains supply is the mains plug. Ensure
sofa, rug or similar surface. This product should not be that the mains plug is accessible at all times.
placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
OBJECT OR LIQUID ENTRY: Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could
result in a fire or electric shock.
ACCESSORIES: Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious damage
to the product. Use only with a cart, stand, tripod, bracket
or table recommended by the manufacturer, or sold with
the product. Any mounting of the product should follow
the manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.

1
Cyrus X Power User Instructions
Power supply Servicing
Connect the moulded IEC connector of the AC cord supplied Do not attempt to service this product yourself as opening
plugs into the power inlet 1@ on the rear of the unit. The or removing covers may expose you to dangerous voltage
mains fuse 1# is on the rear panel next to the power switch. or other hazards. Refer all servicing to qualified service
It must only be replaced as follows: personnel.
Europe 230V...................T2AL/250V 20mm CONDITIONS REQUIRING SERVICE: Unplug this product
North America 115V.......T3.15AL/250V 20mm from the wall outlet and refer servicing to qualified service
personnel when:
The mains supply requirement for your Cyrus X Power is
marked on a label on the rear panel. Before connecting, • When the power supply cord or plug is damaged.
check that this voltage is the same as your mains supply. • If liquid has been spilled, or objects have fallen into the
230V Products: Voltage Range 220V-240V product.
115V Products: Voltage Range 110V-120V • If the product has been exposed to rain or water.
If you move to an area with a different mains voltage, • If the product has been dropped or damaged in any
contact your local Cyrus distributor to have your product way.
converted. • If the product does not operate normally by following
the operating instructions. (Adjust only those controls
that are covered by the operating instructions. Improper
adjustment of other controls may result in damage
requiring extensive work by a qualified technician to
restore the product to its normal operation).
• When the product exhibits a distinct change in
performance.
REPLACEMENT PARTS: When replacement parts are
required, be sure the service technician has used
replacements specified by the manufacturer or have the
same characteristics as the original part. Unauthorised
substitutions may result in fire, electric shock, or other
hazards.
SAFETY CHECK: Upon completion of any service or repairs
to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.

Product service centres

For product service or technical advice, contact only
authorised Cyrus service centres. Contact details for
Cyrus distributors may be found on the Cyrus website at
www.cyrusaudio.com.

2
Cyrus X Power User Instructions

FCC NOTICE*
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try and correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.

*115V products

3
Cyrus X Power User Instructions
Welcome to the world of Cyrus! Preparations for Installation
Congratulations on your choice of Cyrus Hi-fi products. Our Before installing your Cyrus amplifier check that the following
state-of-the-art design technology and outstanding quality items are included in the accessory box.
of manufacture has won countless awards around the • Power Cable
world. We are confident that you will derive great pleasure
• 2 MC-BUS phono cables
from owning a product from one of the most recognised and
respected manufacturers of hi-fi equipment. • 4 Loudspeaker Plugs
Now is a good time to register your new Cyrus product. To After removing these items, please retain the packaging.
register, visit www.cyrusaudio.com/support and click the Install the amplifier in a well ventilated location away from
‘Register your product’ link. sources of high temperature, dust or humidity. Never stand
Please read these instructions carefully before commencing the amplifier under another unit or on any surface likely to
installation. They provide full guidance to help you install obstruct its cooling or ventilation.
your amplifier safely and correctly.

4
Cyrus X Power User Instructions

Installation

a b c de fgh i 1)

CHAIN INPUT
M
OUT
L
MONO OPERATION : R L STEREO OPERATION :
• Set ‘mono/stereo’ • Set ‘mono/stereo’
switch to mono. switch to stereo.

STEREO
MONO
CHAIN INPUT
• Connect input to ‘M’. MC-BUS • Connect inputs to ‘L & R ’.

M+
M-

+ SPEAKER - - SPEAKER +
• Connect speaker • Connect speakers
+ve to ‘M+’ and to ‘-speaker+’ for left &
speaker -ve to ‘M-’. to ‘+speaker- ’ for right.
Refer to manual for details R R L Refer to manual for details
IN

PRECISION USE
ELECTRONIC PSX-R
INSTRUMENT ONLY
MADE IN ENGLAND

1$ 1# 1@ 1!

Key to the rear panel drawing

1. Right speaker output + 8. Stereo/Mono selector switch
(- Speaker output mono) 9. Left speaker output -
2. Right speaker output - 10. Left speaker output +
3. MC-BUS connection (+ Speaker output mono)
4. Right chain output 11. PSX-R Connection
5. Left/Mono chain output 12. Power inlet
6. Left/Mono input 13. Mains fuse
7. Right input 14. Power switch

5
Cyrus X Power User Instructions
Important – read before making any audio Loudspeaker Connection
connections Fitting the speaker plugs
To avoid possible damage to your amplifier, it is essential to Check for polarity indicators (+ and -) on the loudspeaker
disconnect all system components from the mains supply cable and fit the plugs. Observe any signal directionality
before connecting or disconnecting audio interconnects. markings indicated on the cable. If an arrow is printed on
the cable it should point toward the loudspeaker.
Two channel or Single channel high power
operation Two channel stereo speaker connections
The X Power may be configured as either a two channel Connect the left loudspeaker to the rear panel sockets
(stereo) amplifier or as a single channel (mono) amplifier 1) (red speaker plug) and i (black speaker plug) of the
for higher power applications. The X Power is factory set for X Power. Connect the right loudspeaker to the rear panel
stereo operation. sockets a (red speaker plug) and b (black speaker plug) of
the X Power.
Stereo systems Dual outputs are provided for the convenient connection of
Stereo systems may be set up with either a single X Power bi-wiring speaker cables.
set for two channel (stereo) operation or twin X Powers set
for single channel (mono) operation. Left Right
Right Input Input Left
Audio-Visual multi-channel systems treble treble
- -
Both two channel and single channel high power modes
may be employed for the multiple channel requirements + +
of audio-visual systems. Two channel and single channel + +
amplifiers may also be mixed in these systems if preferred, - -
for example- three X Power amplifiers set for single channel
Right Left
(mono) operation to drive the Front Left, Right and Centre bass bass
BI-WIRING
channels and a single Two channel (stereo) amplifier to drive
both the left and right surround channels.
Note: Ensure all equipment is disconnected from the power Single channel mono speaker connections
before any connections or disconnections are made. Connect the left loudspeaker to the left X Power using the
panel sockets marked M+ 1) (red speaker plug) and M- a
Input Connection (black speaker plug).
Two channel (stereo) operation Repeat this procedure to connect the right channel speaker
to the right channel X Power.
Set the STEREO/MONO switch h to Stereo. Connect a stereo
phono interconnect from the output of the preamplifier to
Left
the X Power’s left and right inputs f and g. Be sure to
Left Right
Input Input treble
observe colour coding of the plugs to keep left and right -
channels correctly ordered.
+
Single channel (mono) operation +

When switched for single channel mono operation, twin -

X Power amplifiers are necessary in a stereo system – one Right Left
treble
for the left and one for the right channel. +
bass

Set the STEREO/MONO switch h on both amplifiers to Mono.

Connect a single phono interconnect from the left output of
-
-
the preamplifier to the ‘M’ Mono input f of the left channel
X Power. Connect the right output of the preamplifier to the +
‘M’ Mono input f of the right channel X Power. Right
bass MONO BI-WIRING

Audio-Visual multi-channel systems

Connect each X Power in turn to the system speakers,
following the two channel or single channel instructions
above, as appropriate.

6
Cyrus X Power User Instructions
Bi-amplification MC-BUS connection
For convenience of connection in applications such as Bi- Connecting the MC-BUS sockets c of the X Power in an
Amplification the Chain outputs e and d allow more than MC-BUS system provides unified system power control.
one X Power to be connected to a Pre-Amplifier. An MC-BUS loop is established by connecting single phono
The Chain facility can be used with two or more X Powers cables from the MC-BUS output of one unit to the MC-BUS
for Bi/Tri-amping by connecting the Chain output of the input of another in a daisy-chain. Complete the loop by
first X Power to the inputs of the next X Power. Such a returning the MC-BUS output of the final component to the
system provides the sonic benefits of totally separate MC-BUS input of the first.
power amplification for the bass and treble units of the
loudspeakers.
When adding additional X Powers to a system, connect a
quality RCA phono interconnect from the Chain output RCA
jacks e and d to the inputs f and g of the new X Power.
For single channel (mono) chain installations, connect the Cyrus CD Player
‘M’ chain output e of each Mono amplifier to the ‘M’ Mono
inputs f of the new amplifiers.
When the input connections to the new amplifier are
complete, separate connections may be made to the bass
and treble units of the system speakers.

Left Right
Input Input Cyrus Streamer

Right Left
treble treble
- -
+ +
- - Cyrus Preamplifier

+ +
Right Left OUT
CHAIN
M
L
INPUT

bass bass
MONO OPERATION : R L STEREO OPERATION :
• Set ‘mono/stereo’ • Set ‘mono/stereo’
switch to mono. switch to stereo.
STEREO
MONO

CHAIN INPUT
• Connect input to ‘M’. MC-BUS • Connect inputs to ‘L & R ’.
M+
M-

+ SPEAKER - - SPEAKER +
• Connect speaker • Connect speakers
+ve to ‘M+’ and to ‘-speaker+’ for left &
speaker -ve to ‘M-’. to ‘+speaker- ’ for right.
Refer to manual for details R R L Refer to manual for details
IN

PRECISION USE
ELECTRONIC PSX-R
INSTRUMENT ONLY
MADE IN ENGLAND

Cyrus Power amplifier

With MC-BUS established you can control the power function

of the system from the front panel or remote control of the
main Cyrus amplifier.

7
Cyrus X Power User Instructions
Connecting to the AC Mains Supply External Power Supply - PSX-R/PSX-R2
Connect the socket on the AC Power cable to the Power The PSX-R is a unique DC power supply that will upgrade
inlet 1@ on the rear panel of the X Power. Now connect the the sonic performance of compatible products in the Cyrus
cable to a suitable AC power point. range. The PSX-R2 is a performance upgraded version of
The mains power switch 1$ on the rear panel of the X Power the PSX-R. Both of these power supplies are compatible for
should be left on for normal operation, except when left connection to the Cyrus X Power.
unattended for a long period when it should be switched off The following text refers to the use of the PSX-R, but applies
or disconnected from the AC supply. also to the PSX-R2.
To connect a PSX-R, disconnect both components from the
mains, then plug the connector on the umbilical cord of the
PSX-R into the Multi-Pole socket on the back panel. You will
need a mains supply for both units.
NOTE: Connection of a PSX-R is detected automatically, so
no internal adjustments are required.
How it works
When a PSX-R is connected to a Cyrus product, the power
feeds to the internal circuitry are split two ways with the
clean, stable power source of the PSX-R feeding sensitive
circuit sections while other requirements are supplied
internally. This ensures complete isolation of control circuits
and sensitive analogue sections reducing AC mains-borne
noise and power supply ripple.

8
Cyrus X Power User Instructions

OPERATION

a b

MONO
stereo/mono upgradeable power amplifier

X Power

Key to the front panel drawing

1. Standby switch
2. Standby indicator
3. Mono indicator

9
Cyrus X Power User Instructions
Switching On Front panel indicators
The mains power switch 1$ on the rear panel of the X Power MONO Indicator
should be left on for normal operation, except when left
The MONO Indicator c will glow red if the rear panel
unattended for a long period when it should be switched off
STEREO/MONO switch h is set for MONO Operation. This
or disconnected from the AC supply.
switch can be operated only when the X Power is in Standby.
When power is applied, the STANDBY key a may be used Operating it at any other time activates the fault indication
for power control. The Standby light b shows red when the system.
X Power is in Standby and green when operational.
In addition to manual power control from the STANDBY key,
the X Power also features a music sensing automatic power
control which listens for the presence of an input signal
and will switch on if music begins to play. If the X Power
has been activated in this way it will reset to Standby five
minutes after the music has stopped.
Remote power control can also be enabled by connecting the
MC-BUS sockets c of the X Power to a Cyrus system which
includes a Preamplifier, Integrated amplifier or Surround
decoder. A number of X Powers may be connected in this
way to provide remote standby control of all the system
power amplifiers.
Disabling the Music Sensor
In some installations a number of X Power amplifiers may be
driven from a single preamplifier source to feed loudspeakers
in several extension rooms. In systems such as these it may
be preferable to disable the Music Sensor to prevent all
amplifiers switching on when music commences.
The user can disable the Music Sensor by holding the front
panel Standby key whilst switching on the unit at the rear.
The amplifier will now respond only to the front panel
standby button and MC-BUS commands. The Music Sensor
will remain disabled until power is next disconnected from
the unit.
The Music Sensor may also be permanently disabled by
returning the X Power to your retailer or the Cyrus factory
for an internal adjustment.
NOTE:- If MC-BUS connections are made to the X Power the
music sensor is disabled automatically.

10
Cyrus X Power User Instructions
TROUBLESHOOTING GUIDE Fault indication system
If your X Power is not operating properly, disconnect the The X Power has a powerful protection system and fault
power and check all connections using the notes in this indication system designed to prevent damage to your hi-fi
manual. If problems persist, the checklists below may help. system and help you diagnose a possible problem. If a fault
If you are in any doubt, consult your retailer. persists, reset the amplifier via the rear panel mains switch.

No sound from either speaker Standby light flashing Green / Yellow

Preamplifier mute switch Deselect Mute This indicates overload in Switch off the power at
is on at least one channel. If the the rear panel and unplug
problem is temporary (e.g. the speaker cables. If the
Loudspeakers are Check speaker connections
excessive volume), normal fault indication clears when
disconnected
operation will resume after power is re-applied, check
Fault indication on the See ‘Fault Indication ten seconds. If the fault the loudspeakers, cables
front panel of your X System’ indication persists, there and plugs for loose strands
Power may be a problem with the of wire causing a possible
No sound from one loudspeaker speakers or connections. short circuit.
Does your speaker have Check speaker, replace Standby light flashing Green
fuses? fuses A fault has been reported Switch off the power
Speaker cables or Check connections, cables - from the PSX-R to the X Power and the
interconnects faulty replace if needed PSX-R Switch on again.
Mono installations Check connections are If the problem does not
correct to input and output clear, return both units to
of both amplifiers. your Cyrus distributor for
checking.
Poor quality sound in two channel stereo mode
The PSX-R is disconnected Check there is power to the
Selector switch incorrectly Set the switch to stereo or switched off. PSX-R and check the PSX-R
set to mono connection to the X Power.
Poor quality sound in single channel mono mode Standby light flashing Yellow / Red
Selector switch incorrectly Set the switch to mono The X Power has over Check the ventilation
set to stereo heated. around the X Power. Allow
Speakers plugs not Check all speaker the unit to cool down
connected to the correct connections carefully before re-applying power.
terminals MONO light flashing
The STEREO/MONO switch Return the switch to its
has been changed whilst original position.
the amplifier is operating.
If a fault condition still remains, return the amplifier to your
Cyrus appointed retailer or an authorised Service Centre.

11
Cyrus X Power User Instructions
Specifications Warranty
Power Supply The warranty period is two years. No retailer or distributor
may vary the terms of this warranty, which is personal to the
Voltage:............................................. As plate on rear of unit
original purchaser and is not transferable.
Power Consumption..................................................... 360W
Please retain the sales receipt as proof of purchase.
Safety Compliance.............................................................. CE
EMC (230V)........................................................................ CE Warranty claims must wherever possible be made through
the retailer from whom the equipment was purchased.
EMC (115V)...................................................................... FCC
This warranty excludes:
Enclosure
• Damage caused through neglect, accident, misuse, wear
Dimensions (WxHxD).................................215 x 75 x 365mm and tear, or through incorrect installation, adjustment
Weight........................................................................... 5.6kg or repair by unauthorised personnel. Any unauthorised
Material......................................................... Die cast chassis servicing will result in loss of warranty.
Audio Performance • Liability for damage or loss occurring in transit to or from
Input Sensitivity (60W/8Ω)..........................................413mV the purchaser.
Input Impedance ...........................................................20kΩ • Consequential damage, loss or injury, arising from or in
Channel Balance............................................................0.1dB conjunction with this equipment.
Frequency Response ............................. -3dB...0.1Hz-100kHz Equipment for attention under warranty should be consigned
Signal to Noise Ratio (A-WTD)............... Unwtd............108dB return carriage paid. If returned equipment is found to
(Ref 60W) A-wtd.............115dB comply with the published specification, CYRUS reserves
the right to raise a charge.
Signal to Noise Ratio (A-WTD)............... Unwtd..............90dB
(Ref 1W) A-wtd...............97dB The above conditions do not affect your statutory rights as
a consumer.
Output Power Stereo (Internal PSU)..... 6 Ohms.......... 100W
Output Power Mono (Internal PSU)...... 6 Ohms.......... 181W
Output Power Mono (with PSX-R)......... 6 Ohms.......... 178W
WEEE
THD+N (@ 2/3 full power)..................... 20Hz-20kHz.... 0.01%
This logo means that this product is not to
1kHz........... 0.0015%
be disposed of with your household waste.
Cyrus reserves the right to change all specifications without notice. E &OE
This product should be handed over to a
designated collection point to be recycled.
Your cooperation in the correct disposal of
this product will contribute to the effective
usage of natural resources. For more
information on collection points, contact
your disposal service or City Hall.

Cyrus X Power english v5.3

12
Cyrus Audio Ltd., Ermine Business Park, Huntingdon, PE29 6XY, U.K.