Rotational Viscometers

Product
ViscoQC
name
 The Game
FIND OUT MORE

Changer
www.anton-paar.com/apb-viscoqc

USE STRAIGHT OUT OF THE BOX:

UNPACK

Fast start up in less than two minutes

ENSURE CORRECT ALIGNMENT:
Built-in digital leveling guarantees the highest
measurement repeatability

EXCHANGE SPINDLES EASILY:

MEASURE

Built-in magnetic coupling saves you 15 seconds

per test
DETECT SPINDLE AND GUARD AUTOMATICALLY:
Toolmaster™ prevents spindle selection errors
and ensures fully traceable results | TruGuard™
documents whether a guard is attached or not
SEARCH FOR SPEED AUTOMATICALLY:
TruMode™ finds the best spindle/speed
combination to measure new formulations
GET THE BEST PELTIER TEMPERATURE
CONTROL:
Temperature stability of ±0.1 °C from -45 °C to
+175 °C | T-Ready™ tells you when your sample
has reached the required temperature

V-CURVE SOFTWARE (on ViscoQC 300):

UPGRADE

For programmability, graph, analysis, and

additional methods (yield, low temperature)
V-COMPLY SOFTWARE (on ViscoQC 300):
Full compliance to 21 CFR Part 11 (audit trail,
electronic signature, etc.)

THE HIGHEST QUALITY IS OUR PROMISE:

MAINTAIN

With a three-year warranty on the instrument

and accessories
LOWEST DOWNTIME:
Optional on-site service | Automatic bearing check
by TruSine™ avoids sudden downtime
Accessories –
for Outstanding
Results
PTD 100 CONE-PLATE WITH BUILT-IN PELTIER TEMPERATURE DEVICE
The ViscoQC 100/300 can be equipped with the PTD 100 Cone-Plate measuring system with integrated
Peltier temperature control within seconds, providing a sophisticated method for absolute viscosity
determination of small-volume samples down to 0.5 mL.
SOFTWARE FOR YOUR
PAPERLESS LAB Highlights of this all-in-one solution:
AP CONNECT
- Error-eliminating, time-saving automatic gap setting
- Built-in Peltier temperature control from 0 °C to 100 °C and embedded temperature probe for super-precise
temperature control and reading
- Spindles with magnetic coupling and Toolmaster™ feature, saving up to 25 seconds per spindle change
and preventing costly operator errors

www.anton-paar.com/apc

SOFTWARE UPGRADES FOR EXTRA ANALYSIS AND

CONFIGURE AS YOU NEED IT COMPLIANCE
ALWAYS AT THE CORRECT TEMPERATURE ViscoQC 300 is your future-proof rotational SOLUTIONS FOR YOUR SPECIAL CHALLENGES
Whether your sample flows easily or is sticky,
we have the solution for you: Our unique air-cooled Peltier temperature devices viscometer that can grow with your needs via For the most convenient operation, ViscoQC 100/300
- 500 mL sample: L/RH spindles (ISO 2555), gel time kit, with integrated T-Ready™ ensure that your sample is optionally upgradeable software modules in stand- can be equipped with Heli-Plus. Your measurements
vane spindles, T-bar always at the set temperature. Save time and money alone mode (V-Curve and/or V-Comply) – all without can be fully standardized since all measuring
- <20 mL sample: Concentric cylinders (CC, ISO 3219), since they don’t require any cooling liquids. any external PC. V-Comply is delivered with a positions are defined digitally on the user interface.
double-gap (DG, DIN 54453), ultra-low viscosity - PTD 80 for ViscoQC 100/300: 15 °C to 80 °C, ready-to-use pharma qualification package (PQP) By using a T-bar spindle, paste-like materials can be
adapter (UL), small sample adapter (SC4), disposable for measuring systems CC, DG, SC4 document to save time and costs by qualifying the easily measured.
cup D18/D22, ASTM spindles (4B2, L1D22) - PTD 175 for ViscoQC 300: -45 °C to +175 °C, instrument within one day.
Additionally, you can equip your ViscoQC with: additionally for UL, 4B2, L1D22; fulfills ASTM D2983/ The determination of the gel time/pot life of
spindle guard (L/R), optional spindle rack, or flexible D8210, ASTM D5133/D7110, AASHTO T316/ A PC data collection software, V-Collect, is also thermosetting compounds (such as resin, glue) is
cup holder. ASTM D4402* included for free in every ViscoQC delivery. possible with ViscoQC 100/300 using a glass rod.

* Up to 175 °C maximum
Your Application –
Our Solution
L-Model – R-Model – H-Model –
Low Viscosity Medium Viscosity High Viscosity Complies to

Adhesives (hot melt) | Asphalt | Ceramic slurries

Adhesives (solvent base) | Chemicals ISO 2555 | ASTM D1084 | ASTM D1824
CHEMICALS AND Engine oil | Epoxy resins | Gums Adhesives (highly viscous) | Asphalt | Caulking compounds
Hot waxes | Hydraulic fluids | Inks | Latex ASTM D2983/D8210 | ASTM D4402 (up to 175 °C)
PETROLEUM Inks (screen printing) | Organisols | Paints Epoxies | Inks (ballpoint, offset, lithographic) | Pastes
Oils | Paints and coatings | Isocyanate ASTM D5133/D7110
PRODUCTS Paper coatings and pulp | Plastisols Putty (wall) | Roofing compounds | Sealants
Polymer solutions | Rubber solutions | Solvents and more [see website]
Surface coatings | Varnish

Chocolate | Dairy products | Yogurt

FOOD AND Dairy products | Fruit concentrate | Juice
Dressings | Food products | Pudding | Starches Chocolate | Mayonnaise | Molasses | Peanut butter | Jam IOCCC 2000 | ICA
BEVERAGES Syrup | Smoothies | Gum arabic
Sauces | Ketchup

Cosmetics | Mouthwash | Pharmaceuticals Creams | Detergents | Lotions | Shampoo Ph. Eur. 2.2.10 | USP 912 | ChP 0633
COSMETICS AND IP 2.4.28 | JP XVII 2.53 (2.1.2)
Shower liquids | Hand disinfection fluid Liquid makeup | Eye makeup remover Gels | Ointments
PHARMACEUTICALS
Methylcellulose Toothpaste | Nail polish | Cough suppressant and more [see website]

ViscoQC 100 ViscoQC 300

L R H L R H

Viscosity test type Single-point Multi-point

Viscosity range [mPa·s]

0.2* to 6 M 1.6** to 40 M 13.2*** to 320 M 0.1* to 6 M 1.3** to 40 M 10.6*** to 320 M
(depends on the measuring system)

0.1 to 200 0.01 to 250

Speed [rpm] 25 increments: 19 standard speeds Speed list with 18 standard speeds
plus 6 freely selectable speeds Freely selectable speeds within the speed range

Max. spring torque [mNm] 0.0673 0.7187 5.7496 0.0673 0.7187 5.7496
We’re confident in the high quality Accuracy ±1.0 % full scale range

of our instruments. That’s why we provide Repeatability ±0.2 %

a full warranty for three years. Display 3.5” color LCD 7” color touchscreen

Non-storage Data memory for up to 999 measurements

Data storage
Direct print/export Print/export from data memory
All new instruments* include repair for three years. You avoid unforeseen costs and can always
rely on your instrument. Alongside the warranty, we offer a wide range of additional services
and maintenance options. Toolmaster (003623873), TruGuard (017904903), Trumode (017904895),
Trademarks
T-Ready (009176983), TruSine (017904915)
*Due to the technology they use, some instruments require maintenance according to a maintenance schedule.
Complying with the maintenance schedule is a prerequisite for the three-year warranty. * With optional PTD 100 Cone-Plate, with L1 spindle 15 mPa·s M = 1 million
** With optional PTD 100 Cone-Plate, with RH1 spindle 100 mPa·s
*** With optional PTD 100 Cone-Plate, with RH1 spindle 800 mPa·s
 © 2022 Anton Paar GmbH | All rights reserved.
Specifications subject to change without notice.
C78IP001EN-K

www.anton-paar.com