Scribd
Upload
32 views1 page

8 WPS Model

The document provides specifications for a welding procedure, including base metal details, filler materials, joint geometry, welding parameters, post-weld heat treatment requirements, and inspection tests. It specifies materials, thicknesses, qualities, and other attributes of the base metals and filler. It also outlines preheat requirements, welding sequences, parameters for each run including process, position, filler, and variables like current and speed. Post-weld heat treatment and required non-destructive and dimensional tests are defined.

Uploaded by

Sergiu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views1 page

8 WPS Model

The document provides specifications for a welding procedure, including base metal details, filler materials, joint geometry, welding parameters, post-weld heat treatment requirements, and inspection tests. It specifies materials, thicknesses, qualities, and other attributes of the base metals and filler. It also outlines preheat requirements, welding sequences, parameters for each run including process, position, filler, and variables like current and speed. Post-weld heat treatment and required non-destructive and dimensional tests are defined.

Uploaded by

Sergiu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SPECIFICATIA PRELIMINARA A SPS nr./WPS No.

PROCEDURII DE SUDARE _______________


WELDING PROCEDURE SPECIFICATION Revizia / Issue:
(conform cu /according to ____________________) 00
Normativ/ Standard :_________________________ WPAR nr.:

Materiale de baza/ Grosime MB 1 / BM 1 Calitate/ Quality Grupa/


Thickness _______________[mm] ____________________________ Group ______
Base Metal (MB)
Grosime MB 2 / BM 2 Calitate/ Quality Grupa/
Thickness _______________[mm] ____________________________ Group ______
Grosime suport / Calitate/ Quality Grupa/
Support thickness _______________[mm] ____________________________ Group ______
Sarma tubulara/ Clasificare/ Furnizor/ Lot/
Cored wire __________ Classification __________________ Supplier _________________ Batch ____
Material(e) de adaos
Sarma plina/ Solid Clasificare / Furnizor/ Lot/
/ wire __________ Classification __________________ Supplier _________________ Batch ____
Filler material(s) Clasificare / Furnizor/ Lot/
Flux/ flux
__________ Classification __________________ Supplier _________________ Batch ____
Rost /Groove: Unghi / Angle:
Inaltime rost(mm) / Depth of root face: Deschidere rost(mm)/ Gap :
Schema depunere (sudare) / Design of overlay (welding): Succesiune treceri/ Welding Sequences :

Pre-incalzire / Metoda/ Temperatura/ Temperatura intre straturi/


Preheat Method Temperature ______0C Interpass Temperature _________0C
Caracteristica/ parametrul Valori
Secventa de sudure / Welding Sequence Strat 1/ Run 1 Strat n/Run 2 -------- ------- ------- Strat n/ Run n
Procedeul de sudare / Welding process
Pozitia de sudare / Welding Position
Material de Adaos / Filler Metal
Parametrii de sudura/
Welding Parameters

Diametru / Diameter (mm)


Tip gaz de protectie / Shielding Gas Type
Debit / Flow Rate (l/min)
Compozitie / Composition (%)
Tip curent/ Current type
Polaritate / Polarity (-/+)
Intensitatea curentului / Welding Current (A)
Tensiunea arcului / Arc Voltage (V)
Viteza sarmei / Wire Feeding Speed (cm/min)
Viteza de sudare / Travel Speed (cm/min)
Energia liniara/ Arc energy [kJ/mm]
Nr. de treceri/ Layer no.
Tratament termic / Incalzire / Heating (ºC/h) Racire/ Cooling. (ºC/h) Temperatura palier + timp
Post Weld Heat Treatment Durata / During (h) Durata/ Soak temp (ºC)

Verificare si incercari / Examinarea Vizuala / Da Nu Radiatii penetrante / Da Nu Ultrasunete/ Da Nu Dimensional / Da Nu


Inspection and Tests Visual Examination Radiographic Examination Ultrasonic Dimensional
X Examination Examination
Lichide penetrante la Pulberi magnetice/ Fazorul / Altele/
Da Nu Da Nu Da Nu Da Nu
radacina/ Magnetic Powder PAUT Others
Dye Penetrant on root Examination

Elaborat de / Issued by: ___/___/___ Aprobat de / Approved by: ___/___/___ Client / Altii (Client /Others): ___/___/___

You might also like