Scribd
Upload
45 views

Ffdquickreferenceguide

This document provides a quick reference guide for the functions and navigation of a FFD 20/20 instrument. It describes how to access and configure the four pages with programmable functions. It also explains how to find and change functions, calibration, and damping values. A table lists the available functions under various menus that can be accessed through the buttons along the bottom of the display.

Uploaded by

Ali Uyanık
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views

Ffdquickreferenceguide

This document provides a quick reference guide for the functions and navigation of a FFD 20/20 instrument. It describes how to access and configure the four pages with programmable functions. It also explains how to find and change functions, calibration, and damping values. A table lists the available functions under various menus that can be accessed through the buttons along the bottom of the display.

Uploaded by

Ali Uyanık
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

FFD QUICK REFERENCE GUIDE

P AG E S PE ED

UP

W IN D

DOW N

N AV.

ENTER

LIG H T

PAGE: Direct access to 4 pages with two functions per page; User programmable. UP/DOWN: Modify values and change functions. ENTER: Accept values. SPEED/WIND/NAV: Direct access to 3 pages with two functions in each button; Non user programmable. LIGHT: Switches on, off and changes light levels.

CHANGING FUNCTIONS IN THE 20/20: FINDING A FUNCTION: Pressing UP/DOWN scroll through the menus. When the chosen menu is found, press ENTER. Pressing UP/DOWN scroll through the functions When the chosen function is found, press ENTER. CONFIGURING A PAGE: Press the PAGE key to scroll to the page you wish to configure. Pressing UP/DOWN scroll through the menus until CONFIG DISP is displayed. Pressing ENTER a flashing PAGE is displayed. Pressing ENTER again, the two actual functions chosen for that page are displayed. To change the function in the upper display, press UP and scroll through the menus using UP/DOWN. Once in the desired menu, press ENTER and scroll through the functions using UP/DOWN keys. Once in the desired function, press ENTER. Pressing ENTER once again saves the new page configuration. Pressing PAGE for 4 seconds makes one 20/20 flash. Pressing DOWN scrolls through the 20/20s. Once in the chosen 20/20, press ENTER, the actual menu flashes. Pressing UP/DOWN scrolls through the menus. When the chosen menu is found, press ENTER. Press UP/DOWN to scroll through the functions. When the chosen function is found, press ENTER. Pressing PAGE returns the unit to normal display. CHANGING DAMPING/CALIBRATION: Select the function you want to change; calibration or damping, in the upper display. Press DOWN and scroll through menus until CALIBRATION or DAMPING flashes in the lower display. Press ENTER to get the current CAL/DAMP value. Pressing ENTER again the value flashes. Press UP/DOWN to increase/decrease the cal/damp value. Pressing ENTER saves the new value. Pressing PAGE returns to normal display.

FUNCTION Speed Log

Depth

Navigate

Wind

Perform

MENU CHOICE Boat Speed Average Speed Velocity Made Good Stored Log Trip Log Depth - Metres Depth Feet Depth Fathoms Heading Off Course Dead Reckoning Course Dead Reckoning Distance Course Leeway Tidal Set Tidal Drift Apparent Wind Speed (Kt) True Wind Speed (Kt) Apparent Wind Angle True Wind Angle True Direction Head/Lift Trend Next Leg Apparent Wind Angle Next Leg Apparent Wind Speed Apparent Wind Speed m/s True Wind Speed m/s Tacking Performance Reaching Performance Optimum Wind Angle Polar Speed Layline Distance Heel Angle Next Leg Speed Target Boat Speed Opposite Tack Mast Angle Wind Angle to the Mast Trim

FUNCTION TEXT BOAT SPD AVG SPD VMG STD LOG TRIP LOG DEPTH M DEPTH FT DEPTH FM HEADING OFF CRSE D/R CRSE D/R DIST COURSE LEEWAY TIDE SET TIDE RTE APP W/S TRUE W/S APP W/A TRUE W/A TRUE DIR LIFT/HDR N/L AWA N/L AWS APP W/S MS TRUE W/S MS TACKING REACHING OPT W/A POL SPD LAYLINE HEEL N/L SPD TARG SPEED OPP TACK MAST ANG W/A MAST TRIM

FUNCTION

Waypoint

MENU CHOICE Brg W/point to W/point Mag. Brg W/point to W/point True Brg to W/point Rhumb Mag. Brg to W/point Rhumb True Brg to W/point Great Circle M Brg to W/point Great Circ True Distance to Waypoint Rhumb Distance to W/point Great Circ Course Over Ground Mag Course Over Ground True Speed Over Ground VMG to Waypoint Estimated Time of Arr to WPT Cross Track Error Battery Volts Sea Temperature Degrees C Sea Temperature Degrees F Air Temperature Degrees C Air Temperature Degrees F Timer

FUNCTION TEXT BRG W-W M BRG W-W T BTW RMB M BTW RMB T BTW GC M BTW GC T DTW RMB DTW GC CRSE O/G M CRSE O/G T SPD O/G VMG WPT ETA WPT CROSS TR VOLTS SEA TEMP C SEA TEMP F AIR TEMP C AIR TEMP F TIMER

Motor

Temperature

Timer

Misc.

Linear 1 Linear 2 Linear 3 Linear 4 Barometric Pressure Barometric Pressure Trend Rudder Angle Halcyon

LINEAR 1 LINEAR 2 LINEAR 3 LINEAR 4 BAROMETR PR TREND RUDDER HALCYON

External

Rmote 0 to 9

REMOTE 0 TO 9

You might also like