Diesel Generator Set

DQL Series
EPA Emissions
1950kW - 2500kW 60Hz

Optional Features Shown

Description Features
This Cummins Power Generation diesel generator set Emissions Compliance – The generator set complies with
is a fully integrated power generation system, providing EPA emissions requirements for stationary applications.
optimum performance, reliability and versatility for ®
Cummins Heavy-Duty Engine - Rugged 4-cycle industrial
standby, prime power and continuous duty operation, diesel delivers reliable power, low emissions, and fast
in stationary applications. response to load changes.
Permanent Magnet Generator (PMG) - Offers enhanced
This generator set is designed and motor starting and fault clearing short circuit capability.
manufactured in facilities certified to ISO9001.
Alternator - Several alternator sizes offer selectable motor
starting capability with low reactance 2/3 pitch windings; low
The Prototype Test Support (PTS) program waveform distortion with non-linear loads, fault clearing
verifies the performance integrity of the
generator set design. Cummins Power short-circuits capability, and class F or H insulation.
Generation products bearing the PTS symbol Control System - The PowerCommand electronic control
meet the prototype test requirements of NFPA is standard and provides total genset system integration,
110 for Level 1 systems. Unit accepts 100% of
nameplate standby rating in one step. including automatic remote starting/stopping, precise
frequency, and voltage regulation, alarm and status
message display, AmpSentry protection, output metering,
The PowerCommand control is Listed UL508 -
Category NITW7 for U.S. and Canadian usage. auto-shutdown at fault detection, and NFPA 110
compliance.
Cooling System – Standard remote cooled configuration
with a selection of optional generator set mounted radiator
or remote radiator package available.
Structural Steel Skid Base – Robust skid base supports
the engine and alternator assembly.
Warranty and Service - Backed by a comprehensive
warranty and supported by a worldwide distributor network
of 170 distributors and service branches.

Standby Rating Prime Power Ratings Continuous Ratings Data Sheets

60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz
Model kW (kVA) kW (kVA) kW (kVA) kW (kVA) kW (kVA) kW (kVA) 60 Hz 50 Hz
DQLC 2500 (3125) 2335 (2920) 1950 (2438) D-3337

2006 Cummins Power Generation Specifications Subject to Change Without Notice S-1529 (4/06)
Generator Set Specifications
Steady State Voltage Regulation, No Load to Full Load ± 0.5%
Random Voltage Variation ± 0.5%
Frequency Regulation Isochronous
Steady State Frequency Band ≤ 1.0%
Radio Frequency Emissions Compliance BS EN 61000-6-4:2001 Emissions-Industrial
Immunity Frequency Emissions Compliance BS EN 61000-6-2:2001 Immunity-Industrial
IEC 801.2 through IEC 801.5; MIL STD 461C, Part 9
Engine Specifications
Design 4 cycle, V-block, turbocharged and low temperature after-cooled
Bore 170.0 mm (6.69 in.)
Stroke 190.0 mm (7.48 in.)
3
Displacement 77.6 liters (4735 in )
Cylinder Block Cast iron, 60°V 18 cylinder
Minimum Recommended Battery Size 2200 amps at ambient temperature of 0°F to 32°F (-18°C to 0°C)
Battery Charging Alternator 40 amps
Starting Voltage 24 volt, negative ground
Fuel System Direct injection: number 2 diesel fuel
Fuel Filter Triple element, 10 micron filtration, spin on fuel filters with water
separator
Air Cleaner Type Dry replaceable element
Lube Oil Filter Type(s) Six spin-on, combination full flow and by-pass filters
Standard Cooling System Remote cooled configuration
Alternator Specifications
Design Brushless, 4 pole, revolving field
Stator 2/3 pitch
Rotor Two bearing
Insulation System Class H on low voltage and medium, Class F on high voltage
Standard Temperature Rise 125º C Standby
Exciter Type PMG (Permanent Magnet Generator)
Phase Rotation A (U), B (V), C (W)
Alternator Cooling Direct drive centrifugal blower fan
AC Waveform Total Harmonic Distortion < 5% no load to full linear load, <3% for any single harmonic
Telephone Influence Factor (TIF) <50 per NEMA MG1-22.43
Telephone Harmonic Factor (THF) <3
Available Voltages
60 Hz
Line – Neutral / Line - Line
380 12470
440 13200
480 13800
600
4160
Note: Consult factory for other voltages.
Generator Set Options
Engine Alternator Exhaust System
208/240/480V Coolant heater for 80°C rise alternator Residential-grade exhaust silencer
ambient above 4.5°C (40°F) – 10,000 105°C rise alternator Critical-grade exhaust silencer
Watt max. 125°C rise alternator
208/240/480V Coolant heater for 150°C rise alternator Generator Set
ambient below 4.5°C (40°F) – 12,840 120/240V, 300 Watt anti-condensation Batteries
Watt max. heater Battery Rack w/ hold-down – floor
Control Panel Temperature sensor – RTDs, 2/phase standing
120/240V, 100 Watt control anti- Temperature sensor – alternator Vibration Isolators
condensation space heater bearing RTDs PowerCommand Network
Paralleling configurations Differential current transformers Remote annunciator panel
Remote fault signal package 2 year warranty
Run relay package Cooling System 5 year warranty
Remote radiator 10 year major components warranty
High Ambient Air Temperature (Ship
Loose)
Enhanced High Ambient Air
Temperature (Ship Loose)
Note: Some options may not be available on all models in all regions, consult factory for availability.

2006 Cummins Power Generation Specifications Subject to Change Without Notice S-1529 (4/06)
Control System

PowerCommand Digital Generator Set Control

Operator Panel Features
• Analog AC Metering Panel. Provides color-coded display of generator set output
voltage, current, frequency, power factor, and kW. All phases of voltage and current
are simultaneously displayed. Easy to see output status from a distance.
• Graphical Data Display. Allows operator to view all engine and alternator data;
perform operator adjustments for speed, voltage, and time delays; view fault history;
and set-up and adjust the generator set. (Set up requires password access.) A
portion of the display is allocated to display system status, including alarm and
shutdown conditions. Display is controlled by sealed membrane switches. Up to 9
lines of data can be displayed, with approximately 26 characters per line.
• LED Status Lamps. The status lamps indicate: Remote Start Command (green),
Not in Auto (red-flashing), Warning (amber), and Shutdown (red).
• Off/Manual/Auto Mode Select Switch and Run/Stop Switch. Mode selection
switches allow remote automatic starting, or manual starting from the operator panel.
Panel includes an LED lamp to indicate manual mode operation.
• Exercise Switch. Automated exercise function in the control allows an operator to
initiate an exercise period and have it automatically completed by the control.
• Fault Reset Switch. Allows the operator to reset the control after a warning or
shutdown condition. LED lamp with switch indicates that a fault is present on the
system.
• Panel Lamps and Switch. Operator panel can be illuminated by a series of high-
intensity LED lamps, controlled by a membrane switch on the panel. Panel lamps
include a time delay to automatically switch off after a preset time period.
• Emergency Stop Switch. Provides positive and immediate shut down of the
generator set on operation.
• Construction. Operator panel is a sealed design with membrane switches for most
functions. Mechanical switches are oil-tight design. Plug interfaces are provided to
the generator set control system. Display panel labeling is configurable for language.
Standard Control Functions Optional Features
• Integrated Isochronous governing and fuel • Integrated Digital Paralleling
control system. Controls, including options for
• Integrated 3-Phase sensing voltage semi-automatic and automatic
regulation system, with automatic single (isolated bus) applications.
and 3-phase fault regulation. • LonMark Compliant network
• Integrated AC protective functions, include interface
over/under voltage, short circuit, over • Control Anti-condensation heater
current (warning and shutdown), and • Key-type mode select switch
overload. • Relay outputs for genset running,
• Integrated Engine management system, common warning, and common
including configurable cycle-cranking shutdown.
functions and configurable start sequence. • Exhaust Temperature Alarm
• Comprehensive warning and shutdown • Alternator Temperature Alarm(s).
protection, including customer-configurable • Centinel Lube Oil Burn System.
warning and shutdown conditions. • Power Transfer Control Function,
• Comprehensive data displays, including 3- to allow generator set to control
phase AC voltage, current, power factor, remote power circuit breakers for
kW, and kVA; engine oil pressure, coolant open, fast closed, or soft
temperature, DC volts, and other service (ramping) power transfer from a
functions; operating history (load and fault utility source to the genset (2
conditions); and system setup information. minute maximum fail-to-
disconnect timer).

2006 Cummins Power Generation Specifications Subject to Change Without Notice S-1529 (4/06)
 Ratings Definitions
Standby: Prime (Unlimited Running Time): Base Load (Continuous):
Applicable for supplying emergency power Applicable for supplying power in lieu of Applicable for supplying power continuously
for the duration of normal power commercially purchased power. Prime to a constant load up to the full output rating
interruption. No sustained overload power is the maximum power available at a for unlimited hours. No sustained overload
capability is available for this variable load for an unlimited number of capability is available for this rating. Consult
rating.(Equivalent to Fuel Stop Power in hours. A 10% overload capability is authorized distributor for rating. (Equivalent
accordance with ISO3046, AS2789, available for limited time. (Equivalent to to Continuous Power in accordance with
DIN6271 and BS5514). Nominally rated. Prime Power in accordance with ISO8528 ISO8528, ISO3046, AS2789, DIN6271, and
and Overload Power in accordance with BS5514). This rating is not applicable to all
ISO3046, AS2789, DIN6271, and BS5514). generator set models.
This rating is not applicable to all generator
set models.

DQLC
This outline drawing is to provide representative configuration details for model series only. Do not use for installation design, see
respective model data sheet for specific outline drawing number.
Dim Dim Dim Set Weight* Set Weight*
Model “A” mm (in.) “B” mm (in.) “C” mm (in.) dry kg (lbs) wet kg (lbs)
DQLC 5571 (219.3) 2251 (88.62) 2569 (101.1) 17141 (37791) -
*Note: Weights represent a set with standard features. See outline drawings for weights of other configurations. Weights are
calculated using the largest alternator frame size.

See your distributor for more information.

Cummins Power Generation Cummins Power Generation Cummins Power Generation

rd
1400 73 Avenue N.E. Manston Park, Columbus Avenue 8 Tanjong Penjuru
Minneapolis, MN 55432 USA Manston, Ramsgate Singapore 6099019
Telephone: +1 (763) 574-5000 Kent CT12 5BF, UK Telephone: +65 6265-0155
Fax: +1 (763) 574-5298 Telephone: +44 (0) 1843 255000 Fax: +65 6266-0432
Email: [email protected] Fax: +44 (0) 1843 255902 Email: [email protected]
Web: www.cumminspower.com Email: [email protected] Web: www.cumminspower.com
Web: www.cumminspower.com
Cummins and PowerCommand are registered trademarks of Cummins Inc. AmpSentry is a trademark of Cummins Inc.

Important: Back feed to a utility system can cause electrocution and/or property damage. Do not connect to any building's electrical
system except through an approved device or after building main switch is open.

2006 Cummins Power Generation Specifications Subject to Change Without Notice S-1529 (4/06)