› GN DC Series

Panel Mount SSRs

3-60, 1-50, 1-100 & 1-200 VDC

› Current rating 10, 15 and 30 Amps

› Output voltage 3-60, 1-50, 1-100 and 1-200 VDC
› Transistor and Mosfet Output
› Available with or without IP20 touch-safe cover
› LED Status Indicator
› UL Approved, CE Compliant to EN60950-1
› Improved SEMS screw and washer
› Screw or Faston Terminals
› Redesigned housing with anti-rotation barriers
› DC control
› Epoxy Free Design IP00 Package, IP20 Package
Screw Terminal Screw Terminal
Previous version click here

Designation Input Output Current Code

SSR, Transistor Output 3-32 VDC 3-60 VDC 10 Amp 84 134 750
SSR, Mosfet Output 3.5-32 VDC 1-200 VDC 10 Amp 84 134 850
SSR, Mosfet Output 3.5-32 VDC 1-100 VDC 15 Amp 84 134 860
SSR, Mosfet Output 3.5-32 VDC 1-50 VDC 30 Amp 84 134 870

Output Type Thermal Pad

7: Transistor Control Voltage Blank: Not Included
Series 8: MOSFET 0: 3.5-32 VDC H: Included

8413 4 7 5 0 K H
Touch Safe Cover Rated Voltage & Termination
4: Not Included (IP00) Load Current Blank: Screws & clamps
7: Included (IP20) 5: 3-60 VDC, 10 Amps* K: Installed standoffs with
5: 1-200 VDC, 10 Amps** screws for PC board
Required for valid part number
6: 1-100 VDC,15 Amps** mounting (IP00 only)
For options only and not required for valid part number
7: 1-50 VDC, 30 Amps**
> Not all part number conbinations are available.
Contact Crouzet Technical Support for information on * With output type 7 only
the availability of a specific part number. ** With output type 8 only

Output Specification (1)...

Description 8413x750 8413x850 8413x860 8413x870
Recommended Operating Voltage [Vdc] 3-48 1-150 1-72 1-36
Absolute Maximun Rating [Vdc] 60 200 100 50
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 1 0.1 0.1 0.5

This datasheet has been downloaded from http://www.digchip.com at this page

I GN DC Series I 02 I www.crouzet-ssr.com

Output Specifications (1)

Description 8413x750 8413x850 8413x860 8413x870
Maximum Load Current [Adc] (2) 10 10 15 30
Minimum Load Current [mA] 10 0.1 0.1 0.1
Maximum Surge Current [Adc] (10msec) 15 50 50 72
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.4 2.1 0.8 0.8
Maximum On-State Resistance [RDS-ON][Ohms] N/A 0.21 0.05 0.03
Thermal Resistance Junction to Case (Rjc) [°C/W] 2 1.25 2.1 1.5
Minimum Heat Sink for Rated Current @ 40°C [°C/W] 5 1.5 2 2
Maximun Pulse Wide Modulation Frequency [Hz] (3) 1500 2000 2500 1200

Input Specifications (1)

Description 8413x750 8413x8xx
Control Voltage Range 3-32 VDC 3.5-32 VDC
Maximum Reverse Voltage -32 VDC -32 VDC
Minimum Turn-On Voltage 3 VDC 3.5 VDC (4)
Minimum Turn-Off Voltage 1 VDC 1 VDC
Minimum Input Current (for on-state) 9 mA 11 mA
Maximum Input Current [mA] 14.5 mA 15 mA
Nominal Input Impedance [Ohms] Current Regulated Current Regulated
Maximum Turn-On Time [µsec] 100 75
Maximum Turn-Off Time [µsec] 200 50

General Specifications (1)

Description Parameters
Dielectric Strength, Input to Output (50/60Hz) 3750 Vrms
Dielectric Strength, Input/Output to Ground (50/60Hz) 2500 Vrms
Minimum Insulation Resistance (@ 500 VDC) 109 Ohms
Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range (5) -40  +100 °C
Ambient Storage Temperature Range -40  +100 °C
Weight (typical) 2.46 oz (70 g)
Housing Material UL94 V-0
Baseplate Material Aluminum
Input Terminal Screw Torque Range (in-lbs/Nm) 13-15 /1.5-1.7
Load Terminal Screw Torque Range (in-lbs/Nm) 18-20 / 2-2.2
SSR Mounting Screw Torque Range (in-lbs/Nm) 18-20 / 2-2.2
Input/Load Terminal Screw Torque Range (in-lbs/Nm) (6) w/”K” option 8-10 / 0.9-1.13
Humidity 85% non-condensing
LED Input Status Indicator Green
MTBF (Mean Time Between Failures) at 40°C ambient temperature (7) 21,395,130 hours (2,441 years)
MTBF (Mean Time Between Failures) at 60°C ambient temperature (7) 11,545,504 hours (1,317 years)

General Notes

1) All parameters at Tc=25°C unless otherwise specified.

2) Heat sinking required, see derating curves.
3) 8VDC Minimum control voltage. Resistive loads only. Consider switching losses; at maximum frequency reduce to 75% output current.
4) Increase minimum voltage by 1V for operations from -20 to -40°C.
5) Maximum ambient temperature for 8413x750 is 80°C, decrease maximun control voltage 1.35V/°C above 80°C ambient temperature.
6) Option "K" is intended only for use in attaching a printed circuit board to the SSR or mounting the SSR to a printed
circuit board (PCB thicknesses from 0.031 to 0.093 inches [0.79 to 2.36 mm]).
7) All parameters at 50% power rating and 100% duty cycle (contact Crouzet tech support for detailed report).
I GN DC Series I 03 I www.crouzet-ssr.com

Diagrams
Wiring
* Inductive loads must be diode suppresed.

+ + -
* * Recommended Wire Sizes
V Load Load V
- + +
Terminals Wire Size Wire Pull-Out
(Solid / Stranded) Strength (lbs)[N]

24 AWG (0.2 mm2) / 0.2 [minimum] 10 [44.5]

Input
2 x 12 AWG (3.3 mm2) / 3.3 [maximum] 90 [400]

20 AWG (0.5 mm2) / 0.518 [minimum] 30 [133]

Output 2 x 10 AWG (5.3 mm ) / 5.3 2

110 [490]

2 x 8 AWG (8.4 mm2) / 8.4 [maximum] 90 [400]

+ +
V V
- -

Equivalent
35.5Circuit Block

Input Current vs Input Voltage

Standard Regulated “DC” Inputs
+DC 3 2 +DC 14
12

Input Current (mA)

10
OUTPUT

Control Trigger
INPUT

8
Circuit Circuit
6
4
2
-DC 4 1 -DC
Current 0
Limiter 0 5 10 15 20 25 30 35
DC Input Voltage

Dimensions in[mm]
Tolerances: ±0.02 in / 0.5 mm
All dimensions are in: inches [millimeters]
Screw Termination Hex Standoff Termination (“K” Option) (6)
1.1 1.1
[27.9] 0.89 1.04
[22.6] [27.9]
Mounting Mounting [26.4]
0.49 Hole/Slot Hole/Slot (2 places)
0.49 0.19 [4.9]
[12.4] 0.19 [4.9] [12.4]
DIA. DIA.

1.88 1.7 2.25 1.88 1.7 2.25

[47.6] [43.2] [57.3] [47.6] [43.2] [57.3]

1.0 1.0
[25.4] [25.4] 0.93
[23.6]
1.75 (4 places)
1.75
[44.5] 1.0
[44.5] [25.4]
(2 places)
I GN DC Series I 04 I www.crouzet-ssr.com

Dimensions in[mm]
Screw Termination, IP20
1.1 Mounting
[27.9] Hole/Slot
0.19 [4.9]
0.49 DIA.
[12.4]

1.88 1.7 2.32 2.25

[47.6] [43.2] [58.8] [57.3]

1.0
[25.4] 1.22
[30.9]

1.75 Tolerances: ±0.02 in / 0.5 mm

[44.5] All dimensions are in: inches [millimeters]

Curves

Thermal Derate Information

(*) SSR metal base plate acting as heat sink, it must be exposed to free ambient air.

8413x750 8413x850
5ºC/W No Heat Sink (*) 1.5ºC/W 3ºC/W 5ºC/W

10 10
Load Current (Amps)

Load Current (Amps)

8 8

6 6

4 4

2 2

0 0
20 30 40 50 60 70 80 20 30 40 50 60 70 80 90 100
Ambient Temperature (ºC) Ambient Temperature (ºC)

8413x860 8413x870
2ºC/W 3ºC/W 5ºC/W 2ºC/W 3ºC/W 5ºC/W No Heat Sink (*)

15 30

25
Load Current (Amps)
Load Current (Amps)

10 20

15

5 10

0 0
20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100
Ambient Temperature (ºC) Ambient Temperature (ºC)
I GN DC Series I 05 I www.crouzet-ssr.com

Curves

Surge Current Information

8413x750 8413x850
20
70

60
15

Surge Current (Amp)

Surge Current (Amp)

50

40
10
30

5 20

10

0 0
0.1 1 10 100 1000 0.1 1 10 100 1000
Surge Duration (msec) Surge Duration (msec)

8413x860 8413x870
80
150
70
125

Surge Current (Amp)

60
Surge Current (Amp)

50 100

40 75

30
50
20
25
10

0 0
0.1 1 10 100 1000 0.1 1 10 100 1000
Surge Duration (msec) Surge Duration (msec)

Period For Pulse Wide Modulation applications select

the curve according duty factor and pulse duration as following.
Duty Factor 10%
Pulse Wide
Duty Factor 20% Duty Factor = x100 (%)
Period
Duty Factor 50%
Pulse
Wide (i) for Single Surge Pulse Tc=40°C ;Tj 175°C
(ii) for Repetitive Surge Pulse Tc=40°C ;Tj 130°C
I GN DC Series I 06 I www.crouzet-ssr.com

Agency Approvals

› EN60950: Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7:
E46203

GN DC Series has Environmental Product declarations type III conforming to ISO 14025.

Accessories

Recommended Accessories
New Accessories!
Protective Cover & Hardware Kits
Protective Cover
Cover Hardware Heat Sink Thermal Resistance Lug Terminal Thermal Pad
Part number: KS101 Kit Part No. [ºC/W]
Clear plastic cover compatible with all
new S1 designs. Safety covers provide KS101 HK1 HS501DR 5.0 TRM1 HSP-1
added protection from electric shock HS301 / HS301DR 3.0
HK4 TRM6 HSP-2
when installing or checking equipment.
HS251 2.5

HS201 / HS201DR 2.0

HS202 / HS202DR 2.0

Hardware Kit
Part number: HK4 HS172 1.7
Bag with 2 square brass accessories HS151 / HS151DR 1.5
and 2 screw 8-32 x 5/8 for output. Used
to mount TMR1 lug terminals. HS122 / HS122DR 1.2

HS103 / HS103DR 1.0

HS101 1.0

HS073 0.7

HS072 0.7

HS053 0.5

HS033 0.36

HS023 0.25

Rev. 021315
 I GN DC Series I 07 I www.crouzet-ssr.com

DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险

HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI 存在电击、
ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA 爆炸或电弧
SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O 闪烁危险
EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSI
OR ARC FLASH. • Eteindre EXPLOSION. ONE. • 在操作此设
• Desconectar
• Disconnect all todos los toutes les • Stellen Sie • Spenga tutta 备之前请先
power before suministros de sources jeglichen l'alimentazion
Strom ab, der
关闭电源。
installing or energia a este d'énergie de e che fornisce
working with equipo antes cet appareil dieses Gerät questa
this equipment. de trabajar avant de versorgt, bevor apparecchiatu 若不遵守这些说明，
con este equipo. travailler Sie an dem ra prima del 可能会导致严重的
• Verify all Gerät Arbeiten lavorare a questa 人身伤害甚至死亡。
dessus de cet
connections • Verificar todas durchführen
appareil apparecchiatu ra
and replace all las conexiones
• Vor dem
covers before y colocar todas • Vérifier tous • Verificare tutti
Drehen auf
turning on las tapas antes connections, et i collegamenti
Energie alle
power. de energizer remettre tous e sostituire
Anschlüsse
el equipo. couverts en tutte le coperture
Failure to follow überprüfen
olace avant de prima della
these und alle
El mettre sous rotazione
instructions will Abdeckungen
incumplimiento sull'alimentazi one
result in death de estas De non-suivi de ersetzen.
or serious injury. instrucciones ces instructions Unterlassung L'omissione di
puede provocar provoquera la dieser seguire queste
la muerte o mort ou des Anweisungen istruz ioni
lesiones serias. lésions sérieuses können zum provocherà la
sérieuses. Tode oder zu morte o di
schweren lesioni serie
Verletzungen
führen.

WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告

RISK OF MATERIAL DAMAGE AND HOT RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND
ENCLOSURE SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG

• The product's side panels may be hot, allow • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie
the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren.
• Follow proper mounting instructions including toucher. • Beachten Sie die Montageanweisungen,
torque values. • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder
• Do not allow liquids or foreign objects to enter notamment les couples de serrage. Fremdkörper in das Produkt ein.
this product. • Ne pas laisser pénétrer de liquide ni de corps
étrangers à l'intérieur du produit.
Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann
Failure to follow these instructions can result in des lésions corporelles graves ou des
serious injury, or equipment damage. Körperverletzung oder Materialschäden
dommages matériels. zur Folge haben.

RIESGO DE DAÑOS MATERIALES Y DE 材料损坏和高温外壳的危险性

RISCHIO DI DANNI MATERIALI E D'INVOLUCRO
SOBRECALENTAMIENTO DE LA UNIDAD CALDO
• 产品的一侧面板可能很热，在其冷却前请
• Los paneles laterales del producto pueden • I pannelli laterali dell'apparecchio possono 不要触碰。
estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。
enfríe antes de tocarlo. prima di toccarlo.
• Respetar las instrucciones de montaje, y en • 请勿让液体及其他异物进入本产品。
• Seguire le istruzioni di montaggio corrette.
particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo
• No dejar que penetren líquidos o cuerpos apparecchio.
extraños en el producto.
La mancata osservanza di questa precauzione può 如不能正确执行这些操作说明，
Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o
producirse graves lesiones, daños materiales. danni alle apparecchiature.
极有可能造成严重人体伤害或者设备的损坏。
I GN DC Series I 08 I www.crouzet-ssr.com

ANNEX - ENVIROMENTAL INFORMATION

The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s
Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic
Information Products.

Part Toxic or hazardous Substance and Elements

Name
Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated
(Pb) (Hg) (Cd) Chromium biphenyls diphenyl ethers
(Cr (VI)) (PBB) (PBDE)

Semiconductor die
Solder

附件 - 环保信息

此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006,

电子信息产品污染控制标识要求。

部件 有毒有害物质或元素
名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚
(Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE)
半导体芯片
焊接点

50