1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

SCHEDULE:

CLAMPS

A MARK CODE DESCRIPTION SIZE DRAWING No.

A

1 TC1 CLAMP, T/COMP 23,5 mm - 26,5 mm 0DEG 23,5 mm - 26,5 mm D-DT-6010 SHT 1 REV 7

2 ----- AS PER LINE DESIGN SPECIFICATION ----- -----

132 kV FEEDER BAY

3 KCP26/127 CLAMP, FIX/SUPP 26,5 mm 26,5 mm D-DT-6029 SHT 1 REV 4

4 EPC26 CLAMP, PEG AL CENT 26,5 mm 26,5 mm D-DT-6115 SHT 1 REV 1

5 KC2 CLAMP, B/COMP 26,5 mm - 38 mm 0DEG 26,5 mm - 38 mm D-DT-6006 SHT 1 REV 5

6 K2 CLAMP, CROSS 26,5 mm - 26 mm 26,5 mm - 26 mm D-DT-6002 SHT 1 REV 4

B B
7 SPC1 CLAMP, B/COMP 26,5 mm PALM 0DEG 26,5 mm D-DT-6018 SHT 1 REV 4

8 SPC2 CLAMP, B/COMP 26,5 mm PALM 45DEG 26,5 mm D-DT-6018 SHT 2 REV 4

9 ----- 2 x JOINT, BALL PORTABLE EARTH 20 kA G/S 20 mm D-DT-6081 SHT 1 REV 8

10 TBTC120/1-26 CLAMP, TUBE TAP-OFF TBTC120/C1-26 120 mm D-DT-6119 SHT 1 REV 3

11 KC1 CLAMP, B/COMP 26,5 mm - 26 mm 0DEG 26,5 mm - 26 mm D-DT-6006 SHT 1 REV 5

12 ACC4 COVER, ACRYLIC 480 x 160 mm ACC4 480 mm x 160 mm D-DT-6055 SHT 1 REV 2
C C
13 YC6 CLAMP, Y/COMP 2 x 38,3 mm - 38 mm 90DEG 38,3 mm - 38 mm D-DT-6013 SHT 3 REV 6

132 kV CENTIPEDE CONDUCTOR

14 K3 CLAMP, CROSS 16,3 mm - 38 mm 16,3 mm - 38 mm D-DT-6002 SHT 2 REV 4

15 C2 CLAMP, T/COMP TBCT80/38/C2 38,3 mm D-DT-6090 SHT 4 REV 6

2 1 11 kV TWIN BULL CONDUCTOR
16 TBFS80-127 CLAMP, F/BUS SUPP TYPE TBFS80-127 80 mm D-DT-6039 SHT 1 REV 7

3
17 TBSC80-127 CLAMP, BUS COUPLER TBSC80-127 80 mm D-DT-6086 SHT 1 REV 5
10 10 10

18 TBPT80 CLAMP, TUBE BUS/PALM T/OFF TBPT80 80 mm D-DT-6117 SHT 1 REV 3

5 12
D 6 11
13 19 ----- CLAMP, CABLE DBL 50-75 mm { P/PROP BLK 50 mm - 75 mm { D-DT-8019 SHT 3 REV 4 D
7
14 20 ----- CLAMP, CABLE 50-75 mm { POLYPROP BLK 50 mm - 75 mm { D-DT-8019 SHT 2 REV 4
5 5 5 8 5 5
6
21 CRS S2 SPACER COND 38,3 mm - 150 mm CRS S2 38,3 mm - 150 mm D-DT-6087 SHT 1 REV 5
8 21
2 15 16 17 22
P2 P1 P1 P2 22 TBEC/P-80 END CAP TBEC 80 PLAIN NO F/CLAMP 80 mm D-DT-6040 SHT 1 REV 4

24 23 TBEC/C-120 END CAP TBEC 120 COND WITH F/CLAMP 120 mm D-DT-6040 SHT 2 REV 4

18 18
4 4 4 9 24 EPC38 CLAMP, PEG AL CENT 38,3 mm 38,3 mm D-DT-6115 SHT 1 REV 1

25 TBFC120/127 CLAMP, TUBE TBFC 120/127 120 mm D-DT-6086 SHT 2 REV 5

E 4 E
19 19 20
9 9 9 9 26 TBSS120/127 CLAMP, TUBE TBSS 120/127 120 mm D-DT-6118 SHT 1 REV 0

27 TBCT120/38 CLAMP, S/COMP TBCT120/38/C1 0DEG 120 mm D-DT-6090 SHT 3 REV 6

28 K4 CLAMP, CROSS 26,5 mm - 38 mm 26,5 mm - 38 mm D-DT-6002 SHT 2 REV 4

132 kV TRANSFORMER CURRENT TRANSFORMER

29 KC4 CLAMP, B/COMP 38,3 mm - 38 mm 45DEG 38,3 mm - 38 mm D-DT-6006 SHT 4 REV 5

132 kV TUBULAR BUSBAR TWIN SUPPORT

132 kV TUBULAR BUSBAR TWIN SUPPORT

132 kV TRANSFORMER CIRCUIT BREAKER

132 kV FEEDER CURRENT TRANSFORMER

30 KC3 CLAMP, B/COMP 38,3 mm - 38 mm 0DEG 38,3 mm - 38 mm D-DT-6006 SHT 1 REV 5

F F

132 kV FEEDER CIRCUIT BREAKER

OPGW/SHIELD WIRE TERMINATION

31 SPC4 CLAMP, B/COMP 38,3 mm PALM 0DEG 38,3 mm D-DT-6018 SHT 1 REV 4
132 kV 6 m TERMINAL SUPPORT

132 kV 6 m TERMINAL SUPPORT

WITH 132 kV SURGE ARRESTORS

32 SPC5 CLAMP, B/COMP 38,3 mm PALM 45DEG 38,3 mm D-DT-6018 SHT 2 REV 4

11 kV CABLE SEALING END

132 kV FEEDER ISOLATOR

132 kV BUSBAR ISOLATOR

132 kV BUSBAR ISOLATOR

CONDUCTOR TERMINATION

132/11 kV TRANSFORMER
33 TBEC/P-120 END CAP TBEC 120 PLAIN NO F/CLAMP 120 mm D-DT-6040 SHT 1 REV 4

NOTES:
G G
2 500 4 500 3 500 3 500 2 500 3 000 2 500 3 500 3 500 4 500 6 550
1. EQUIPMENT NOT FITTED WITH 26 mm{ or 38 mm{ CONNECTION PRONGS MUST BE FITTED WITH
TINNED 26 mm{ OR 38 mm{ BRASS PRONGS DRILLED AND TAPPED TO APPROPRIATE SIZES.

2. ALL SURFACE AREAS OF CONDUCTOR OR CONTACT AREA OF CONNECTION CLAMPS MUST BE TREATED AS
DESCRIBED PRIOR TO MAKING A CLAMPED OR CRIMPED CONNECTION.

132 kV BUSBARS 1A AND 1B WITH BUS SECTION a) APPLY THIN LAYER OF NON OXIDE GREASE TO SURFACE AREA.
b) BRUSH NON OXIDE GREASED AREA THOROUGHLY WITH A CLEAN WIRE BRUSH.
c) WIPE SURFACE AREA CLEAN WITH RAG AND IMMEDIATELY APPLY A FRESH LAYER
OF NON OXIDE GREASE TO CLEAN SURFACE AREA.
H CENTIPEDE CONDUCTOR CENTIPEDE CONDUCTOR
H
d) FIT CLAMP TO CONNECTOR PRONG OR CONDUCTOR AND TORQUE TO:
BUS SECTION - BULL CONDUCTOR d.1) 8 mm GALVANIZED STEEL BOLTS - 15 Nm.
d.2) 10 mm GALVANIZED STEEL BOLTS - 26 Nm.
d.3) 12 mm GALVANIZED STEEL BOLTS - 45 Nm.
26 10 10 10 25 25 10 10 10 26
33 d.4) 8 mm S/STEEL BOLTS - 20 Nm.
33
27 27 d.5) 10 mm S/STEEL BOLTS - 35 Nm.
30 30
28 31 28
d.6) 12 mm S/STEEL BOLTS - 60 Nm.
d.7) 8 mm ALUMINIUM BOLTS - 10 Nm.

29 29 d.8) 10 mm ALUMINIUM BOLTS - 21 Nm.

32
23 23 d.9) 12 mm ALUMINIUM BOLTS - 36 Nm.
5 5 5 5 5 5
J J
P2 P1 P1 P2

24 24 24 24 SET 12 SHT 2 11 kV STATION ELECTRIC DIAG.

SET 12 SHT 1 11 kV STATION ELECTRIC DIAG.
SET 11 SHT 10 LIGHTNING LAYOUT
SET 11 SHT 9 LIGHTING LAYOUT
9 9 9 9 9 9
SET 11 SHT 8 SECTIONS & CLAMPS
SET 11 SHT 7 GENERAL ARRANGEMENT

K SET 11 SHT 6 STEELWORK LAYOUT K

SET 11 SHT 5 FOUNDATION & TRENCH LAYOUT
SET 11 SHT 4 EARTH GRID LAYOUT

SET 11 SHT 3 LEVEL AND DRAINAGE PLAN

132 kV TUBULAR BUSBAR TWIN SUPPORT

132 kV TUBULAR BUSBAR TWIN SUPPORT

132 kV TUBULAR BUSBAR TWIN SUPPORT

132 kV TUBULAR BUSBAR TWIN SUPPORT

SET 11 SHT 2 SITE PLAN
SET 11 SHT 1 132 kV STATION ELECTRIC DIAG.
132 kV VOLTAGE TRANSFORMER

132 kV VOLTAGE TRANSFORMER

132 kV CURRENT TRANSFORMER

132 kV CURRENT TRANSFORMER

DRG NO. REFERENCE DRAWINGS:

/ /
132 kV BUSBAR ISOLATOR

132 kV BUSBAR ISOLATOR

132 kV CIRCUIT BREAKER

0 FIRST ISSUE. / / 533-00002

REV REVISION DESCRIPTION BY CHKD AUTH DATE PROJECT NO.

132 kV ISOLATOR

132 kV ISOLATOR

L L

CARBON SUBSTATION
AUTH:
132/11 kV
5 000 5 000 3 000 3 000 3 000 2 500 2 500 3 000 3 000 3 000 5 000 5 000
DATE: / /

CHKD:
SECTIONS AND CLAMPS LAYOUT
M
M
DATE: / / SET SHEET REVISION

SCALE 1 : 100
DRAWN: C. HAGAN
THIS DRAWING IS THE
PROPERTY OF ESKOM DATE: 15/11/2010
D-WC-7894 11 8 0
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 A1L