Catalogue The Punching Machine Specialists TECHNOLOGY Italiana 2020

The CNC Punching
Machine specialists
EN
About us
TECHNOLOGY Italiana is a historical company that has been operating
in the machine tool sector for over 45 years, becoming an indisputable
reference point.
In 1973 “Off icine Piccini e Bassich”, already active in the light carpentry
sector since 1964, became TECHNOLOGY Italiana. It all started when
they were looking for a punching machine but, not being able to f ind
a solution on the market suitable for their production needs, they
decided to manufacture the f irst TECHNOLOGY CNC punching machine
themselves. Since then we have constantly dedicated ourselves to the
production of punching machines for sheet metal working.
The research and development activity is entirely focused on the design

of CNC punching machines and this is why we can def ine ourselves as
absolute specialists in the sector. Our long experience together with
the precious collaboration with international partners allow us to offer
innovative technology and services, in the name of Made in Italy quality.
TECHNOLOGY Italiana is also a synonym of reliability. We have always

strived to meet customers’ needs, offering the widest range of punching
machines on the market, becoming real consultants for them.
PA G E 2
Vision &
Mission
Our Vision Our Mission
We want to become the benchmark in sheet metal punching technology on a We want to give our customers a unique business experience, providing them with
worldwide level. Our company is constantly looking for global, smart and innovative the best punching technology. We are not just simple suppliers but real partners
solutions. who constantly monitor their customers with targeted after-sales services.
PA G E 3
Our
figures
These numbers reflect TECHNOLOGY's
47 1300
path of growth and innovation, defining
YEARS OF EXPERIENCE INSTALLED PUNCHING
the ambitious road we have taken.
Since 1973 we have been operat- MACHINES
ing in the machine tool sector as Over the years we have installed
manufacturers of CNC punching more than 1300 machines world-
machines. wide.
16 45
MODELS OF MACHINES COUNTRIES WHERE WE
The wide choice of machines is a HAVE OUR MACHINES IN-
feature that makes TECHNOLOGY STALLED
stand out on the market. TECHNOLOGY is active at global
level in the sale of punching ma-
chines
Why rely on the
punching specialists
Expertise and reliability
Our long experience in the field has allowed us to acquire a high
knowledge in punching technology. Today we share our expertise with
our customers, becoming real consultants for them.
Research and Development

In order to continue to be the Punching Specialists, every year we invest
5% of our turnover in Research and Development. We can thus offer our
customers cutting-edge technology.
Wide range
We offer a wide range of CNC punching machines that allows to find
the ideal solution for both small and large companies.
Always by your side

We are constantly at the customer's side, offering a global after-sales
service, so as to be the only reference point for any need.
PA G E 5
The art
of punching.
Let yourself be inspired by the many options that the punching machine offers
you to cut and deform sheet metal.
Processing on sheet metal.
Precision and quality.
The punching machine is the best solution to perform cutting and/or deformation operations on sheet metal from
1 to 6 mm. All this at low cost, without sacrificing precision and quality.
PA G E 8
Fine contouring Forming Embossing
Fine contouring for complex machining operations, Forming with single punch or by step (e.g. louvers) Embossing operations
ensuring high workpiece quality.
Marking Tapping High speed forming

Marking machining to realize logos, lettering Tapping without chip removal on holes CNC functions for the realization of Drag and Drop
or other forms. previously realized. forming (wheel tools by WILSON TOOL)
PA G E 9
Tool change Innovation and functionality are the leitmotif of every tool change system on
system
TECHNOLOGY punching machines.
Vertical Turret, Smart Turret and Fast Change stand out f rom all the tool change
systems on the market for their unique features never seen before on a punching
The future is here machine.
Vertical Turret
(TP Gamma - TP Zeta - TP Zeta XL)
Vertical Turret differs f rom any other automatic tool

change technology due to its strategic position and
vertical design.
Worldwide patented, it features auto-index system
(tool rotation) for all tools and employs the Speedy
Setup system to equip each station in just 12 seconds.
In addition, the tool conf iguration of the 15 stations of
the Vertical Turret can be changed and customized
over time according to production needs.
Why chose the
Vertical Turret
Innovative vertical turret
✔ The strategic position of the Vertical Turret enables more complex forming
operations to be carried out, thanks to the reduced encumbrance in the work
area. Moreover, the operator has a better visibility of the sheet metal being worked.
Maximum conf iguration versatility
✔ The machine conf iguration can be customized by inserting any kind of tool in
every station. The innovative Speedy Setup system allows to equip each station
in just 12 seconds.
All tools are rotating (auto-index)
✔ By rotating any tool f rom 0° to 360° the number of tools to be purchased and the
machining time is signif icantly reduced. Sheet metal waste is minimized thanks
to the possibility of performing complex nestings.
PA G E 1 1
SPEEDY SETUP
Smart Turret
(TP Beta)
All tools are rotating (auto-index)
Smart Turret is an automatic and versatile tool change ✔ By rotating any tool f rom 0° to 360° the number of tools to be purchased and the
system, designed in a horizontal position. Its 5 stations machining time is signif icantly reduced. Sheet metal waste is minimized thanks
are all equipped with the auto-index technology that to the possibility of performing complex nestings.
allows the tool to rotate f rom 0° to 360°. The Smart Turret
provides a customized conf iguration and exploits the Maximum conf iguration versatility
The Speedy Setup system to equip each station in just 12
✔ The machine conf iguration can be customized by inserting any kind of tool in
seconds. every station. The innovative Speedy Setup system allows to equip each station
in just 12 seconds.
PA G E 1 2
Fast
Change
(Tecnumerik - TP Alpha)
For a semi-automatic punch press the speed of tool change is a key point. This
is why TECHNOLOGY punching machines using manual tool change system
(Tecnumerik and Alpha) are equipped with the Fast Change system, which
allows to replace the tool on the machine in just 12 seconds.
Fast Change is the fastest and easiest manual tool change system on the
market.
Latest
generation
servo drive 0,4 Kw
technolgy in stand-by mode
All TECHNOLOGY punching machines look to the future. FANUC motor. For all electronic components TECHNOLOGY relies
on the world leader in this field, namely FANUC.
Without
The outdated hydraulic punching system has been supplanted
by the most efficient servo drive technology, adopted by Hydraulic
Oil
TECHNOLOGY on the whole line of punching machines. Absence of hydraulic oil. The servoelectric system ensures
reduced energy consumption due to the absence of chiller
The servo drive system designed by TECHNOLOGY combines systems required to cool down the unit. Besides, it requires
excellent performance with significant energy savings. minimal maintenance costs.
This is a crucial factor in a world that is increasingly moving towards
energy efficient solutions. SoftPunch mode. This function allows to considerably reduce the
noise when machining thicker workpieces.
Stand-by mode. During stand-by mode the motors are switched
off to reduce power consumption to only 0.4 Kw. DualCam. Innovative technology with which to implement high
frequency machining operations avoiding overheating of the
motor.
DualCam Servo electric motor with dual mode. An exclusive
feature of TECHNOLOGY punching machines. How
For the first time on a punching machine, high-frequency operations can be carried out without does it work?
motor overheating, thanks to the innovative DualCAM technology. TECHNOLOGY has thus intro-
PENDOLUM Mode
duced a new CONTINUOUS ROTATION mode of the engine, in addition to the traditional
The motor performs a movement equivalent
PENDULUM mode, which is common to all punching machines.
to that of a pendulum, making continuous
braking and accelerations. In this mode the
punching machine is faster but overheating
of the motor increases.
CONTINUOUS ROTATION Mode

The motor performs complete rotations
without any braking nor acceleration. In
this mode the punching machine is not
subjected to motor overheating.
New mode
Advantages
✔ Non stop high-frequency machining
✔ Punching frequency of 900 strokes/min
✔ Dynamic stress of the servo-electric system

almost zero
PENDOLUM Mode CONTINUOUS ROTATION Mode
Useful for single punching operations. It allows It reduces the dynamic stress of the motor
✔ Absence of chiller cooling systems
to program the punch stroke. It is fast but it and is perfect for making deformations, such
✔
causes motor overheating. as nibbling and grids, because there is more Reduced noise thanks to the SoftPunch
space between punch and die. function
PA G E 1 5
Open
“C” Frame
The open "C" f rame provides the highest possible accessibility.
Unlike closed structures, the "C" shaped f rame is the only solution to process sheets that are
larger than the machine working area and is ideal for loading sheets on multiple sides without
obstacles.
Enhanced
accessibility
Ease of access to the ma-
chine and increased visibil-
ity in the work area are fea-
tures you cannot miss if you
want to increase production
efficiency. TECHNOLOGY Since 1973 we have
has always adopted the "C"
f rame for its punching ma-
been designing our
chines, as its benefits are re- punching machines
markable.
with the "C" frame.
PA G E 1 6
Customized
Human
Machine
Interface (HMI)
All punching machines are equipped with a console featuring FANUC
PC, 15" touch-screen monitor and a simple and intuitive HMI (Human
Machine Interface) created by TECHNOLOGY specifically for its
customers.
The HMI interface provides a simple way to use the machine by

exploiting three different modes of operation (manual, semi-
automatic, automatic). This feature is useful especially with single-
punch semi-automatic punching machines such as Tecnumerik and
TP Alpha.
Three modes of operation of the punching machine
1 2 3
Manual Semi-automatic Automatic
The punching operations and the movement The movement of the axes is automatic Once the program has been realized with
of the axis are performed manually, using the (according to programming) while the the graphic software TECNOCAM, punching
pedal and the joystick installed on the control punching operation is manual by using the operations and axis movement are automatic.
panel. pedal.
Change the rules of the game. Save
Embrace the Auto-index time and money
technology The example shows the advantage of having all

rotating tools.
The advanced integrated auto-index system allows any tool to be oriented f rom 0° to 360°, with an accuracy A. Without auto-index
of 0.01°. Thus the number of tools to be purchased is drastically reduced.
In addition, with CAD/CAM software you can automatically perform complex nesting by reducing programming 3 tools
and production time.
B. With auto-index
1 tools
Auto-Index
The workpiece in the image was
created by using a single tool rotated
In example A (machine with limited number of
f rom 0° to 360°.
auto-indexlimited) it is necessary to purchase 3 tools
to carry out the three desired shapes.
In the example B (machine with all rotating tools -

✔ Automatic creation of complex nesting TECHNOLOGY) just one rotating tool is enough to
using CAD/CAM software perform the same three operations as case A.
✔
This leads to considerable savings in terms of
Fewer tools to buy, since each tool can be
rotated by 360°. time and money.
✔ It makes it easier to program the

machine
✔ Reduced production times
✔ Tool rotation accuracy of 0.01°

The smallest and cheapest
punching tools TURRET
Our punching machines are equipped with the best tools on the market,
namely TRUMPF-style tools.
Thanks to their small size, the TRUMPF style tools are much easier to handle
and guarantee up to 70% savings.
TRUMPF
The latest generation of TECHNOLOGY punching machines maintain full
compatibility with TECHNOLOGY style tools.
63%
SMALLER
70%
CHEAPER
73%
LIGHTER
THAN TURRET TOOLS THAN TURRET TOOLS THAN TURRET TOOLS

The think-
ing brain
of
punching
machines.
Why we choose FANUC for the electronic

24 Months components of our punching machines
warranty
✔
As for all CNC machines, also for the punching machine, the electronic Technical assistance around the
component is the essential part, but at the same time the most fragile. world
25 Years For this reason, when talking about the CNC, motors and drives of a
✔ High quality and long-lasting com-
of spare parts machine, it is extremely important to rely on specialized partners. ponents
availability
That is why TECHNOLOGY has selected a top level partner such as FANUC, ✔ Warranty extension up to 5 years
263 Service
a world leader company able to guarantee maximum reliability, quality
and availability of components over time.
branches
in 108 countries
World-class
partners
Since 1973 TECHNOLOGY has been manufacturing its punching machines
choosing only high quality partners and suppliers to obtain excellent
quality results
PA G E 2 1
Start The key feature of all Start Line punching machines is the
Line Quality/Price ratio.

Tecnumerik TP Alpha
Typology Semi-Automatic Typology Semi-Automatic

Productivity ★★★★★ Productivity ★★★★★
TP Beta TP Gamma
Typology Automatic Typology Automatic

PA G E 2 3
CAM SOFTWARE AND
15" TOUCH-SCREEN DISPLAY
The machine programming is made easy and
immediate thanks to the integrated graphic
software (TecnoCAM) and 15 inch touch-
Tecnumerik screen monitor.

TecnoCAM is a software that allows to realize
simple shapes in a few steps directly on the
machine.
Designed to be the small punching machine that is
indispensable in every carpenter’s workshop. Ideal for
making prototypes, small and simple productions and
modifications of workpieces already manufactured with an
automatic or laser machine.
Semi-Automatic. The tool change of the machine is performed manually, while the punching
operations can be managed in three modes: manual, semi-automatic and automatic (see page
15).
25 tons 1
of punching station
force
CHANGE TOOL SYSTEM "FAST CHANGE"
The semi-automatic punching machine with

SERVO DRIVE PUNCHING UNIT
manual tool change system Tecnumerik is
equipped with the Fast Change system, which FANUC high-performance servo drive punching
allows you to change the tool on the machine in unit without any hydraulic oil, ensuring low
just 12 seconds. energy consumption.
PA G E 2 5
Standard
What kind of tools can be used?
In the single station available on the
Configuration
Single tool
Tecnumerik is possible to install a
single standard tool or different types
Special tool
of tools to make deformations (e.g. lou-
vers, embossing, marking).
“C”-Frame Sheet metal support table with brushes
(for thicknesses up to 3 mm)
25 Tons of punching force
FANUC numerical control
Servo drive motor with DualCam system Machine console equipped with 15 inches
TOUCH SCREEN monitor
Manual tool change system with Fast
Change system Software installed in the machine:
• Customized Human-Machine Inter-
No. 1 fixed zero reference for sheet metal
face TECNOCONTROL
positioning
• Graphics software TECNOCAM
Automatically reclining front table (for an
easy access to the machine head) Electric panel on the ground
Overall dimensions of the machine
N. 2 sheet metal clamping pliers. Even for Instruction manuals
sheets with already bent edges up to 22
mm U.M 810 1000
Sensor for detecting the position of sheet Height (A) mm 2100 2100
metal clamps with automatic Safety Zone
to avoid impacts between clamps and
Length (B) mm 3300 3500
machine head
Automatic repositioning in X axis by hold- Width (C) mm 2200 3200

ing the sheet metal through the machine
head Weight mm 3.500 3.800
C B
Technical specifications Tecnumerik
U.M 810 1000
Working Area mm 810 x 1000 1000 x 1500
Working Area with repositioning mm 810 x 2000 1000 x 3000
Sheet metal format that can be processed (with repositioning and flipping*) mm 1250 x 2000 1250 x 2500
Max punching force Ton 25
Max thickness mm 6
Max metal sheet weight Kg 150
Y-axis stroke mm -25 /850 -25 / 1050
X-axis stroke mm -40 / 1050 -40 / 1550
X-axis movement speed m/min 65
Y-axis movement speed m/min 50
Simoultaneus speed m/min 80
Max punching frequency stroke/min 600 stroke/min step 1mm | 310 stroke/min step 25,4mm
Station setup time sec 12
Positioning accuracy mm +/- 0,01
Number of total Axes n° 3
Stand-by motor consumption Kw 0,4
Power consumption during working phase Kw 4
*Flipping
Sheet metal flip-
ping to work the
By flipping the sheet metal, it is possible to
sheet metal out
work sheets that are larger than the Y-axis of
of the working
the machine.
area.
Sheet Metal Sheet metal exceeding the Working of sheet metal that was
machine format larger than the working area
PA G E 2 7
CAM SOFTWARE AND
15" TOUCH-SCREEN DISPLAY
TecnoPunch
The machine programming is made easy and
immediate thanks to the integrated graphic
Alpha
software (TecnoCAM) and 15 inch touch-
screen monitor.
TecnoCAM is a software that allows to realize
simple shapes in a few steps directly on the
machine.
The ideal punching machine to enter the world of punching,
at an affordable price. It is the evolution of Tecnumerik
in fact it has the same CNC functions as an automatic
machine. The rotating head allow the orientation of any
type of tool, as well as the use of multi-tools, drag tools for
cutting, ribs, off-set, and tapping tool.
Semi-Automatic. The tool change of the machine is performed manually, while the punching
operations can be managed in three modes: manual, semi-automatic and automatic (see page
15).
25 tons 1 10*
of punching station max. numbers
force of tools
*Please refer to page 62 for more information on tool types

CHANGE TOOL SYSTEM "FAST CHANGE"
The semi-automatic punching machine with

manual tool change system TP Alpha is equipped
INTEGRATED AUTO-INDEX SYSTEM
with the Fast Change system, which allows you to
change the tool on the machine in just 12 seconds. It enables to rotate any tool f rom 0° to 360°.
FANUC high-performance servo drive

punching unit without any hydraulic
oil, ensuring low energy consumption.
It also includes DualCam technology
for high f requency machining
operations avoiding overheating of
the motor.
PA G E 2 9
Standard
In the single station available on the

Single tool
Configuration
TP Alpha you can install a single stand-
ard tool, a Multitool that gives you the
option to insert 5 or 10 tools or special 5 stations Multi-tool
tools to make deformations (e.g. Wheel
tool, Louvers, Marking, Embossing).
10 stations Multi-tool
“C”-Frame FANUC numerical control For more information on tool dimen-
sions, please see page 62.
25 Tons of punching force CNC functions to handle special tools Special tool
(e.g. wheel tools for high speed forming
Servo drive motor with DualCam system and tapping tool)
Tapping tool
Machine console equipped with 15 inches
Manual tool change system with Fast
TOUCH SCREEN monitor
Change system
Consolle macchina separata con PC FA-
"Full Auto-Index", integrated system to
NUC monitor 15” TOUCH SCREEN
rotate each tool and all the tools stored in
the Multi-tool Software installed in the machine:
• Customized Human-Machine Inter- Overall dimensions of
No. 1 fixed zero reference for sheet metal TecnoPunch
face TECNOCONTROL the machine
positioning
Automatically reclining front table (for an
Electric panel on the ground U.M Alpha 246 Alpha 256 Alpha 266
easy access to the machine head)
N. 2 sheet metal clamping pliers. Even for Instruction manuals Height (A) mm 2300 2300 2300
mm Length (B) mm 3650 3900 4400
Sheet metal support table with brushes
Width (C) mm 3200 3200 3200
Sensor for detecting the position of sheet Weight mm 4800 4900 5500
metal clamps with automatic Safety Zone
machine head
C B
Technical specifications TecnoPunch
U.M Alpha 246 Alpha 256 Alpha 266
Working Area mm 1000 x 1500 1250 x 1500 1500 x 1500
Working Area with repositioning mm 1000 x 3000 1250 x 3000 1500 x 3000
Max thickness mm 6
Y-axis stroke mm -25 / 1050 -25 / 1270 -25 / 1550
X-axis stroke mm -40 / 1550 -40 / 1550 -40 / 1550
Time required for tool change with Multi-tool sec 1,5
Station setup time (with Fast Change) sec 12
C-axis rotation speed rpm 50
Minimum possible C-axis rotation (auto-index) ° 0,01
PA G E 3 1
“C”-FRAME
It enables you to process sheets that are
bigger than the machine's working range and
TecnoPunch to load them both f rontally and sideways.

The open "C" f rame ensures the operator
Beta
the highest accessibility and visibility of the
working area.
It is suitable for productions such as panelboards, security

doors, ventilation systems and so on. It is the perfect trade-
off between cutting-edge technology and affordable price.
Automatic and compact, versatile and efficient with low
energy consumption. Station set-up is carried out in just 12
seconds, while the tool change during program operation
in just 3 seconds.
25 tons 5 50*
of punching stations max. number
force of tools
PA G E 3 2
SMART TURRET
Cambio utensile automatico a 5 stazioni sviluppato
orizzontalmente. Può essere attrezzato in pochi
secondi grazie al sistema Speedy Setup.
It enables to rotate any tool f rom 0° to 360°.

the motor.
PA G E 3 3
Standard
In the 5 stations available on the TP

Single tool
Configuration
Beta you can install a single stand-
ard tool, a Multitool that gives you the
option to insert 5 or 10 tools or special
Automatic repositioning in X axis by hold- tool, Louvers, Marking, Embossing).
“C”-Frame
ing the sheet metal through the machine For more information on tool dimen-
head Special tool
25 Tons of punching force sions, please see page 62.
Servo drive motor with DualCam system (for thicknesses up to 3 mm) Tapping tool
"Full Auto-Index", integrated system to FANUC numerical control

the Multi-tool Gestione funzioni CNC per utensili speciali
(es. deformazioni ad alta velocità (utensili
Automatic tool change system with 5
a rotella) e filettatore)
stations "Smart Turret"
Machine console equipped with 15 inches
No. 1 fixed zero reference for sheet metal Overall dimensions of
TOUCH SCREEN monitor TecnoPunch
positioning the machine
Software installed in the machine:
N. 2 sheet metal clamping pliers. Even for
• Customized Human-Machine Inter- U.M Beta 256 Beta 258 Beta 266
face TECNOCONTROL
mm
Height (A) mm 2300 2300 2300
Sensor for detecting the position of sheet
metal clamps with automatic Safety Zone Electric panel on the ground
Length (B) mm 3900 3900 4400
machine head Instruction manuals
Width (C) mm 3200 4350 3200
Sensor that detects whether the punch
has not been removed from the sheet Weight mm 3.500 4.500 5500
metal
C B
U.M Beta 256 Beta 258 Beta 266
Max thickness mm 6
Y-axis stroke mm -25 / 1270 -40 / 1270 -25 / 1550
X-axis stroke mm -40 / 1550 -40 / 2040 -40 / 1550
Time required for tool change sec 3
Station setup time (with Speedy Setup) sec 12
PA G E 3 5
“C”-FRAME
TecnoPunch
bigger than the machine's working range and
to load them both f rontally and sideways.
Gamma the highest accessibility and visibility of the

working area.
It is suitable for own productions and third-party account,

providing an excellent performance/investment ratio.
The groundbreaking vertical turret, unique feature of
TECHNOLOGY, is equipped with 15 rotating stations that
allow considerable savings on machine setup times and
tools purchase costs
25 ton 15 150*
force of tools
PA G E 3 6
VERTICAL TURRET
Groundbreaking 15-stations tool change system, unique on the
market thanks to its vertical design. This feature, worldwide
patented by TECHNOLOGY, allows to have the smallest possible It enables to rotate any tool f rom 0° to
encumbrance in the working area. It can be set up in few seconds 360°.
thanks to the Speedy Setup system.

the motor.
PA G E 3 7
Standard
Single tool
Gamma you can install a single stand-
Configuration ard tool, a Multitool that gives you the

tool, Louvers, Marking, Embossing). 10 stations Multi-tool

For more information on tool dimen-
“C”-Frame Automatic repositioning in X axis by hold- sions, please see page 62.
ing the sheet metal through the machine Special tools
25 Tons of punching force head

Servo drive motor with DualCam system Tapping tool
"Full Auto-Index", integrated system to FANUC numerical control
the Multi-tool Gestione funzioni CNC per utensili speciali
(es. deformazioni ad alta velocità (utensili
"Vertical Turret" with 15-stations auto-
a rotella) e filettatore)
matic tool change system
Machine console equipped with 15 inches Overall dimensions of
TOUCH SCREEN monitor the machine
positioning
Software installed in the machine: Gamma Gamma Gamma Gamma Gamma
N. 2 sheet metal clamping pliers. Even for U.M
• Customized Human-Machine Inter- 256 258 2510 266 268
face TECNOCONTROL
mm
• Graphics software TECNOCAM Height (A) mm 2430 2430 2430 2430 2430
Sensor for detecting the position of sheet
metal clamps with automatic Safety Zone Electric panel on the ground Length (B) mm 3900 3900 3900 4400 4400
machine head Instruction manuals Width (C) mm 3200 4350 5350 3200 4350
Weight mm 6000 6.200 6400 7700 8000
has not been removed from the sheet
metal
C
B
U.M Gamma 256 Gamma 258 Gamma 2510 Gamma 266 Gamma 268
Working Area mm 1250 x 1500 1250 x 2000 1250 x 2500 1500 x 1500 1500 x 2000
Working Area with repositioning mm 1250 x 3000 1250 x 4000 1250 x 5000 1500 x 3000 1500 x 4000
Max thickness mm 6
Y-axis stroke mm -25 / 1270 -40 / 1270 -40 / 1270 -25 / 1550 -40 / 1550
X-axis stroke mm -40 / 1550 -40 / 2040 -40 / 2540 -40 / 1550 -40 / 2040
Station setup time (with Speedy Setup) sec 12
PA G E 3 9
Start Line
Optional
Sensor that detects whether the Scrap suction system f rom the die 5-station tool cart Webcam for remote assistance con-
punch has not been removed f rom nected to the console
the sheet metal
It protects the punching machine It prevents the waste from reaching Having the tools at hand makes tool It considerably improves the commu-
f rom damages and minimizes sheet the working area. Recommended for change operations easier and faster. nication between the company and
metal waste. (It also reduces the risk of high-f requency punching operations the customer
damaging the worpieces) on thin thicknesses (e.g. grid).
Models of punching machines on which the optional accessories are available
Tecnumerik Tecnumerik Tecnumerik Tecnumerik

TP Alpha TP Alpha TP Alpha TP Alpha
TP Beta TP Beta
TP Gamma TP Gamma
Antenna for machine connection to Safety photocells in compliance with Tele Assistance + Industry 4.0
WI-FI network CE standards
Internet wireless connection of the They are necessary to create a safety Tele Assistance guarantees remote
punching machine zone around the machine during ma- machine service thanks to our staff
chining operations and Industry 4.0 systems meet the
needs of automation and increased
productivity.
Tecnumerik Tecnumerik Tecnumerik

TP Alpha TP Alpha TP Alpha
TP Beta TP Beta TP Beta
TP Gamma TP Gamma TP Gamma
PA G E 4 1
Advanced The Advanced Line consists of Premium punching
Line
machines that make Performance their forte.
TP Zeta TP Zeta XL
Typology Automatica Typology Automatica

PA G E 4 3
Uncompromising
Productivity
Advanced Line
Speed. Power. High performance.
The punch machines of the Advanced line are the ultimate expression of advanced technology; a perfect combination of power and speed
for top level performances.
More Speed More Power Higher Productivity
The Advanced Line punching machines are all The punching force of 30 Tons allows you to generate Exploiting working areas of up to 1500 x 4000 (mm)
equipped with a dual Y-axis motor to ensure more power to facilitate the machining of thicker it is possible to work the whole metal sheet without
maximum stability and accuracy at incredible sheet metal. repositioning, shortening production times.
punching speeds.
PA G E 4 5
“C”-FRAME
TecnoPunch
bigger than the machine's working range
and to load them both f rontally and sideways.
Zeta the highest accessibility and visibility of the

working area.
Ideal for large-scale production for companies seeking a

high level of technology and performance.
One of a kind in terms of accessibility and versatility. The
reduced dimensions of the vertical turret in the working
area allows the machining of corrugated sheets or sheets
with thicknesses up to 4/6mm. It can be equipped with an
automatic loading and unloading system for sheet metal,
allowing a nonstop production.
30 ton 15 150*
force of tools
PA G E 4 6
VERTICAL TURRET
Groundbreaking 15-stations tool change system, unique on the
market thanks to its vertical design. This feature, worldwide
patented by TECHNOLOGY, allows to have the smallest possible It enables to rotate any tool f rom 0°
encumbrance in the working area. It can be set up in few seconds to 360°.
thanks to the Speedy Setup system.

the motor.
DUAL MOTOR ON Y-AXIS
The TP Zeta is equipped with a dual motor for Y-axis movement

that takes performances to the next level.
TP Zeta can reach a punching f requency of 900 strokes/min with
1mm pitch.
PA G E 4 7
Standard
Single tool
Zeta you can install a single standard
Configuration tool, a Multitool that gives you the

option to insert 5 or 10 tools or spe-
cial tools to make deformations (e.g.
Wheel tool, Louvers, Marking, Em- 10 stations Multi-tool

bossing).
“C”-Frame Nebulizer with oil to lubricate the working For more information on tool dimen-
area where the punch works on the sheet Special tools
metal.
sions, please see page 62.
30 Tons of punching force
Automatic repositioning in X axis by hold-
head
rotate each tool and all the tools stored in Lateral START/STOP button with pedal for
the Multi-tool opening/closing the clamps.
(It supports the loading of sheets smaller
"Vertical Turret" with 15-stations auto- than 1000x1000 mm)
FANUC numerical control Overall dimensions of
CNC functions to handle special tools
N. 3 sheet metal clamping pliers. Even for (e.g. wheel tools for high speed forming
and tapping tool) U.M Zeta 3510 Zeta 3610 Zeta 3612
mm
Machine console with FANUC PC and 15 Height (A) mm 2360 2360 2360
inch TOUCH SCREEN monitor
Dual motor for Y-axis movement
Software installed in the machine: Length (B) mm 4700 4950 4950
Sensor for detecting the position of sheet • Customized Human-Machine Inter-
metal clamps with automatic Safety face TECNOCONTROL Width (C) mm 5380 5380 6200
Zone to avoid impacts between clamps
and machine head Electric panel on the ground Weight mm 11.500 13.800 14.000
Scrap suction system from the die (It
prevents the waste from reaching the Tele Assistance
working area)
Instruction manuals
Sheet metal support table with both
brushes and metal balls (for thicknesses
up to 3 mm)
A
metal
C
B
U.M Zeta 3510 Zeta 3610 Zeta 3612
Max thickness mm 6
Y-axis stroke mm -40 /+1340 -40 /+1590 -40 /+1590
X-axis stroke mm -40 /+2540 -40 /+2540 -40 /+3040
PA G E 4 9

TecnoPunch
Zeta XL
the motor.
One of the key features of TECHNOLOGY Italiana is the

huge working area, which allow the processing of over-
size sheet metal by repositioning, and enable to achieve
incomparable results. It shares with TP Zeta all the
advantages of the vertical turret: highest accessibility
and versatility, as well as all the innovative technology of
TECNOPUNCH machines.
30 ton 15 150*
force of tools
PA G E 5 0
VERTICAL TURRET
Groundbreaking 15-stations tool change system, unique
on the market thanks to its vertical design. This feature,
worldwide patented by TECHNOLOGY, allows to have the INTEGRATED AUTO-INDEX SYSTEM
smallest possible encumbrance in the working area. It can
It enables to rotate any tool f rom 0° to
be set up in few seconds thanks to the Speedy Setup system.
360°.
DUAL MOTOR ON Y-AXIS
The TP Zeta XL is equipped with a dual motor for

Y-axis movement that takes performances to the
next level.
TP Zeta can reach a punching f requency of 500
strokes/min with 1mm pitch.
EXTRA LARGE WORKING

RANGE
The only punching machine
to have a working range of
1500 x 4000, which allows
to process high dimensions
sheets without the need of
repositioning.
PA G E 5 1
Standard
Single tool
Zeta XL you can install a single stand-
Configuration ard tool, a Multitool that gives you the

tool, Louvers, Marking, Embossing).

For more information on tool dimen-
“C”-Frame Nebulizer with oil to lubricate the working sions, please see page 62.
area where the punch works on the sheet Special tools
30 Tons of punching force metal.
Automatic repositioning in X axis by hold-

head
rotate each tool and all the tools stored in Lateral START/STOP button with pedal for
the Multi-tool opening/closing the clamps.
(It supports the loading of sheets smaller
"Vertical Turret" with 15-stations auto- than 1000x1000 mm)
No. 2 fixed zero reference for sheet metal FANUC numerical control Overall dimensions of
TecnoPunch
CNC functions to handle special tools
N. 4 sheet metal clamping pliers. Even for (e.g. wheel tools for high speed forming
and tapping tool) U.M Zeta XL 3616
mm
Machine console with FANUC PC and 15 Height (A) mm 10950
inch TOUCH SCREEN monitor
Dual motor for Y-axis movement
Length (B) mm 4950
Software installed in the machine:
Sensor for detecting the position of sheet • Customized Human-Machine Inter-
metal clamps with automatic Safety Width (C) mm 2360
face TECNOCONTROL
Zone to avoid impacts between clamps
and machine head Electric panel on the ground Weight mm 15000
Scrap suction system from the die (It

prevents the waste from reaching the Tele Assistance
working area)
Instruction manuals
Sheet metal support table with both
brushes and metal balls (for thicknesses
up to 3 mm)
A
metal
C
B
U.M Zeta XL 3616
Working Area mm 1500 x 4000
Working Area with repositioning mm 1500 x 8000
Max thickness mm 6
Y-axis stroke mm -40 /+1590
X-axis stroke mm -40 /+4100
PA G E 5 3
Advanced Line
Optional
Steel sheet metal support tables Automatic and programmable sheet Frontal reclining table for unloading Conveyor belt for waste disposal
with metal balls metal locking clamps the workpieces
Recommended for working sheets It automates the machine setup, rec- Ideal for partitioning It avoids machine downtimes caused
with thickness over 3mm ommended if you often changes sheet (Min format: 150mm x 150mm by the waste container being emptied
metal format max: 500mm x 500mm)
TP Zeta TP Zeta TP Zeta TP Zeta

TP Zeta XL TP Zeta XL TP Zeta XL TP Zeta XL
Safety photocells in compliance with Webcam for remote assistance and Barcode reader for uploading pro- Ready to be supported by automatic
CE standards antenna for machine connection to grams into the machine sheet metal loading and unloading
WI-FI network systems
They are necessary to create a safety Internet wireless connection of the It facilitates the loading of the pro- The punching machines of the Ad-
zone around the machine during ma- punching machine. It considerably grams on the machine avoiding errors vanced line are perfect to be combined
chining operations improves the communication between with a sheet metal loading and unload-
the company and the customer ing system.
TP Zeta TP Zeta TP Zeta TP Zeta

TP Zeta XL TP Zeta XL TP Zeta XL TP Zeta XL
PA G E 5 5
Automate the sheet metal
working process
TECHNOLOGY offers various solutions to automate the punching machine
production cycle: ranging f rom the simple sheet metal loading and unloading
to the sorting of pieces (stacking workpieces on a pallet).
Why
choose automation?
Unattended work cycles Automatic sheet metal
✔ ✔
It is possible to set work loading/unloading
cycles even during night Handling of large and heavy
time, without the need of any sheets metal without operator
operator. supervision.
Production time never Maximum safety at work

✔ changes f rom one time to ✔ The fully automated produc-
another tion cycle prevents operators
The work cycles will always f rom suffering injuries.
have the same duration.
PA G E 5 7
Our automation
system
1. Automatic sheet metal loading and unloading ✔ Automatic sheet metal loading and unloading
It allows automatizing the loading and unloading
cycle of manufactured or micro-jointed sheets, ✔ Compact system
without programming.
2. Automatic sheet metal loading/unloading

+ Sorting
It allows to stack the f inished workpieces on pallets ✔ Automatic sheet metal loading and unloading
(sorting) by programming the operations in a
✔
simple and intuitive way using the JetCam Cad/Cam
Stacking workpieces on pallets (sorting)
software. Thanks to this feature, processing sheets
with micro-junctions is avoided.
✔ Compact system
Besides, you can carry out normal sheet metal
loading and unloading operations without the need
for programming.
PA G E 5 9
Customer There is only one way to enhance our mission: to give voice to our customers who are
Experience
enthusiastic about their business experience with TECHNOLOGY.
Our current Technology punching

machine is a true “working horse” that
has never ceased to operate for seven
years and allows to produce quality
pieces with really low maintenance
cost. When it will be necessary to
replace the current machine or
increase the production line, surely
our next machine will be another
Technology.
Predrag Marin
Owner, MARINEXPERT D.O.O.
(CROATIA)
TP ALPHA allows considerable Given the need to automate the The strength, speed and precision
flexibility in standard production and production with a numerical control of the machine combined with the
development of new products, as machine, among the various options soundness of Technology Italiana
well as speeding up the production I examined the best was Technology were the reasons that convinced us
of modified products according to Italiana: quality and first class to choose them as our machinery
customer specific requirements and technology at the proper price. suppliers.
demands. We must also mention their
unbeatable after-sales service that
Stanislav Jurcik Claudio Mus
makes us even more convinced that
Owner, HELIO, SPOL . S R.O. Owner, OSCAM (ITALY)
we made the right choice.
(CZECH REPUBLIC)
Rudyard Cattan
Owner, INDUSTRIAS CATTAN
(PANAMA)
Where
TECHNOLOGY
Punching
Machines
are installed
Algeria Ecuador Israel Poland Tunisia

Saudi Arabia Estonia Italy Portugal U.S.A
Austria France Lebanon Czech Republic Ukraine
1300 Belgium
Belarus
Germany
Greece
Libya
Macedonia
Romania
Russia
Hungary
Venezuela
Installed Punching Machines Bolivia India Mali Slovakia
Bosnia Herzegovina England Morocco Slovenia
China Iran Mexico Spain
Colombia Iraq Pakistan South Af rica
Croatia Island Panama Switzerland
PA G E 6 1
Tool
Thanks to the tool holder system, inserting a tool on the machine becomes a simple and user-friendly operation. Since its
creation, TECHNOLOGY has been using this type of system with the aim of rendering the use of punching machines more
Holders
immediate and at the same time as customizable as possible.
In fact, the tool holders can be inserted in any station of our punching machines, without any constraint of size or type of
tool.
In order to guarantee the highest possible availability of tools, TECHNOLOGY has chosen to set up its machines with Trumpf style tools, creating a new series
of tool holders in partnership with Wilson Tool that allow the operator to use all Trumpf tools.
1 2 3 4
1. Standard tool holders 1. Special tool holders 3. Tool holders for tapping tool 4. Tool holders for Multi-tool
For housing standard tools with Ø Holder for housing special tools, Holder for tapping tool M2.5 to M10 For the housing of:
1.5 mm to e.g. wheel tools, and forming tools. • 5 stations Multi-tool
Ø 76.2 mm (da Ø 1,5 a Ø da 16)
• 10 stations Multi-tool
(da Ø 1,5 a Ø da 10,5)
TECHNOLOGY punching machines keep full compatibility with TECHNOLOGY-style toolholders.

Setting up a
TECHNOLOGY
Punch Holder punching
machine is
extremely simple
Punch
The tool holders consist of two elements:
Multi-tool.
Stripper • Punch holder:
used to hold the punch and stripper.
Sheet metal
• Die holder:
used to contain the die.
An immediate way
Once the tool has been inserted inside the
to increase the
Die
holder, it only takes a few seconds to place number of tools
the tool holder on the machine, thanks to
the Speedy Setup system.. Multi-tool technology allows more tools (5 or 10)
to be used in a single station and shortens tool
change time to 0.5 seconds.
Die Holder
The tools contained in the Multi-tool can also

use auto-index technology to rotate them from
0° to 360°.
PA G E 6 3
CAD/CAM
We have chosen the CAD/CAM programming software Some features of the JetCam software
JetCam Expert for our • DXF file viewer
Software
machines because it has been created and designed • Integrated CAD for editing and exporting files
specifically for punching machines. • CAD for importing drawings in .DXF format
It is a stable, intuitive and fast software able to offer • and .DWG
advanced functions to program the punching machines • Automatic nesting
and speed up production processes. • Automatic selection of the best tools for
Its user-friendly interface is fully customizable, • perform the processing
Import and allows you to perform more advanced programming • Tool library management
in simple ways. • Possibility of interface with company management
dxf dwg JETCAM Expert is available in three versions with a series

of additional units that give you the chance to create •
software -Enterprise Resource Planning (ERP)
Management of complex machines (punching
customized configurations. machines + automatic loading and unloading
systems)
Choose how you want to program your

punching machine.
After a long collaboration of more than 20 years,
TECHNOLOGY recommends using JetCam
software to get the best out of your punching
machines.
TECHNOLOGY punching machines, however, can

also be programmed with the most popular CAD/
CAM software like:
• Radan
• Metalix
• Lantek
PA G E 6 4
Create programs.
Transfer them to the machine.
Everything in a few simple steps.
With the JetCam CAD/CAM software you can realize the programs for the punch press in a few steps directly from your computer.
After completing the programming you will have to perform one last step, which consists in transferring the data to the machine.This last step can be
completed in a simple way using the wired network (LAN) or with a simple USB key to be inserted in one of the ports of the console.
Step 1 Step 2 Step 3

Importing DXF or DWG files. The software selects the most suitable The nesting is generated and then the CNC
tools from the libraries for performing the code to load into the machine is created.
machining.
A global service Choosing The punching specialists means relying on a single partner able to offer
for punching
global and exclusive services for punching.
TECHNOLOGY FIRST service Other Services

program
• Retrof it of your
If you subscribe to the TECHNOLOGY CNC
TECHNOLOGY First program Punching Machine
you will have access to many • Scheduled maintenance
Specialized technicians always by We solve 75% of all downtime by advantages and discounts • Original spare parts
your side remote assistance on all services. It is reserved • Online portal to sell your
Our specialized technicians intervene With a simple Internet connection we to each customer possessing CNC punching machine
in all the countries where we have can make a complete error diagnosis, a TECHNOLOGY punching
installed TECHNOLOGY punching reducing periods of downtime. machine.
machines
PA G E 6 6
Punching
tools
TECHNOLOGY and TRUMPF-style tools make it possible to carry out
several sheet metal working operations.
We offer a wide range of tools that can be purchased directly from our
online shop.
Specialized consultants are at your disposal to help you choose the
most suitable tool and to support you in the creation of special tools
(e.g. Logos).
The first online shop where

you can buy punching tools
and spare parts
Buy tools for your CNC punching machine online at our TECHNOLOGY
Shop.
• Buy when you want 24 hours a day
• Prices displayed online without registration
• Free shipping
shop.technologyitaliana.com
PA G E 6 7
September 2020
The CNC Punching Machine

Specialists
TECHNOLOGY Italiana
Via Villa Ragone, 18/A - 16039 Sestri Levante - Genova - Italy
Follow us: www.technologyitaliana.com
Tel. +39.0185.457115 - Fax +39.0185.41256

Catalogue The Punching Machine Specialists TECHNOLOGY Italiana 2020

Uploaded by

Copyright:

Available Formats

Catalogue The Punching Machine Specialists TECHNOLOGY Italiana 2020

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogue The Punching Machine Specialists TECHNOLOGY Italiana 2020

Uploaded by

Copyright:

Available Formats

The CNC Punching

The research and development activity is entirely focused on the design

TECHNOLOGY Italiana is also a synonym of reliability. We have always

Our Vision Our Mission

Research and Development

Always by your side

Marking Tapping High speed forming

The future is here machine.

Vertical Turret differs f rom any other automatic tool

Innovative vertical turret

Maximum conf iguration versatility

All tools are rotating (auto-index)

CONTINUOUS ROTATION Mode

✔ Punching frequency of 900 strokes/min

✔ Dynamic stress of the servo-electric system

The HMI interface provides a simple way to use the machine by

Three modes of operation of the punching machine

technology The example shows the advantage of having all

In the example B (machine with all rotating tools -

✔ It makes it easier to program the

✔ Reduced production times

✔ Tool rotation accuracy of 0.01°

THAN TURRET TOOLS THAN TURRET TOOLS THAN TURRET TOOLS

Why we choose FANUC for the electronic

Line Quality/Price ratio.

Typology Semi-Automatic Typology Semi-Automatic

Typology Automatic Typology Automatic

Tecnumerik screen monitor.

The semi-automatic punching machine with

just 12 seconds. energy consumption.

In the single station available on the

Automatic repositioning in X axis by hold- Width (C) mm 2200 3200

U.M 810 1000

Working Area mm 810 x 1000 1000 x 1500

Working Area with repositioning mm 810 x 2000 1000 x 3000

Max punching force Ton 25

Max metal sheet weight Kg 150

Y-axis stroke mm -25 /850 -25 / 1050

X-axis stroke mm -40 / 1050 -40 / 1550

X-axis movement speed m/min 65

Y-axis movement speed m/min 50

Simoultaneus speed m/min 80

Station setup time sec 12

Positioning accuracy mm +/- 0,01

Number of total Axes n° 3

Stand-by motor consumption Kw 0,4

Power consumption during working phase Kw 4

*Please refer to page 62 for more information on tool types

The semi-automatic punching machine with

SERVO DRIVE PUNCHING UNIT

FANUC high-performance servo drive

In the single station available on the

U.M Alpha 246 Alpha 256 Alpha 266

Working Area mm 1000 x 1500 1250 x 1500 1500 x 1500

Max punching force Ton 25

Max metal sheet weight Kg 150

Y-axis stroke mm -25 / 1050 -25 / 1270 -25 / 1550

X-axis stroke mm -40 / 1550 -40 / 1550 -40 / 1550