Scribd
Upload
248 views2 pages

06-Cisco ISE CLI

The Cisco ISE CLI allows performing system configuration, generating logs, applying patches, backing up and restoring data, upgrading software, and reloading or shutting down the device. The CLI has EXEC mode for system access and configuration mode for other tasks. Commands are provided to control applications, view status, backup, and configure networking and other settings.

Uploaded by

dsouzaalex763
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
248 views2 pages

06-Cisco ISE CLI

The Cisco ISE CLI allows performing system configuration, generating logs, applying patches, backing up and restoring data, upgrading software, and reloading or shutting down the device. The CLI has EXEC mode for system access and configuration mode for other tasks. Commands are provided to control applications, view status, backup, and configure networking and other settings.

Uploaded by

dsouzaalex763
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Cisco ISE CLI:

Cisco ISE Command-Line Interface (CLI) allows you to perform system-level configuration in
EXEC mode and other configuration tasks in configuration mode, and generate operational logs
for troubleshooting. You can use CLI to apply Cisco ISE application software patches, generate
operational logs for troubleshooting, and backup the Cisco ISE application data. Additionally,
you can use the Cisco ISE CLI to start and stop the Cisco ISE application software, restore the
application data from a backup, upgrade application software, view all system and application
logs for troubleshooting, and reload or shutdown the Cisco ISE device.
When you start a session in the Cisco ISE CLI, you begin in EXEC mode. In EXEC mode, you have
permissions to access everything in the Cisco ISE server and perform system-level configuration
and generate operational logs. To exit configuration mode and return to EXEC mode, enter end,
exit, or Ctrl-z.

Cisco ISE EXEC Mode Commands


ise1/admin# application reset-passwd ise admin
ise1/admin# application start ise
ise1/admin# application stop ise
ise1/admin# show application status ise
ise1/admin# clear screen
ise1/admin# cls
ise1/admin# show clock
ise1/admin# clock set August 30 18:07:20 2013
ise1/admin# configure terminal
ise1/admin# copy running-config startup-config
ise1/admin# copy startup-config running-config
ise1/admin# debug all
ise1/admin# undebug all
ise1/admin(config)# exit
ise1/admin# halt
ise1/admin# reload
ise1/admin# password
ise1/admin# ping 8.8.8.8
ise1/admin# traceroute 8.8.8.8

1 | P a g e Prepared By Ahmad Ali, Email: [email protected] , Mobile# 0564303717


Cisco ISE EXEC Mode Show Commands
ise1/admin# show backup status
ise1/admin# show backup history
ise1/admin# show cdp neighbors
ise1/admin# show interface GigabitEthernet 0
ise1/admin# show ip route
ise1/admin# show logging system
ise1/admin# show memory
ise1/admin# show ntp
ise1/admin# show timezone
ise1/admin# show uptime
ise1/admin# show users
ise1/admin# show version

Cisco ISE Configuration Mode Commands


ise1/admin(config)# interface GigabitEthernet 0
ise1/admin(config-GigabitEthernet) # ip address 1.1.1.1 255.255.255.0
ise1/admin(config)# exit
ise1/admin(config)# clock timezone UTC
ise1/admin(config)# hostname ISE
ise1/admin(config)# ip default-gateway 192.168.100.254
ise1/admin(config)# ip domain-name test.local
ise1/admin(config)# ip name-server 8.8.8.8
ise1/admin(config)# ip route 0.0.0.0 0.0.0.0 192.168.100.254
ise1/admin(config)# username ali password plain Abc@12345 role admin

2 | P a g e Prepared By Ahmad Ali, Email: [email protected] , Mobile# 0564303717

You might also like