Electro-Mechanical Lock

ML-655M
Robust, Convenient & Electromechanical

The ML-655M electric lock is a high performance lock designed for single action swing doors. Featuring
a double action latchbolt and left/right side adjustable deadlatch tip, the ML-655M allows deadlocking
automatically when the door is closed to be secured for ease of use and convenience. The ML-655M
can be controlled by card readers/keypads and connected to automatic swing door operators for an
integraed access control solution.

Standard Features Specifications

For single action swing doors (applicable to double Operating Voltage: 12~24VAC/DC
action doors) Current Draw: 250mA/12VDC; 150mA/24VDC
For narrow frames
Lock Status Output: 3A/125VAC
Non-handed (Double action latchbolt and deadlatch Endurance Rating: 250,000 cycles
direction auto changeable )
(Factory tested)
Brushed stainless steel construction
Fail-safe /Fail-secure reversible Backset: 30 mm (ML-655M-30),
Lock monitor 35 mm (ML-655M-35)

Optional Cylinder & Key Accessories

ECY-72S ECY-72D
Euro-profile thumbturn cylinder Euro-profile double cylinder
(Oveall 72mm long, for maximum (Oveall 72mm long, for maximum door leaf
door leaf depth of 52mm ) depth of 52mm)

GIANNI INDUSTRIES, INC. Tel: +886-2-2267-7986 Fax: +886-2-2267-9876 1

www.gianni.com.tw [email protected]
Dimensions
3 3
21 21
Unit: mm

28 28

230

125
230

125

100
150
100
150

275
250
250
275

78
78

2 2

30 et 35 et
ks ks
Bac Bac
49 ML-655M-30 54 ML-655M-35

Installation Diagram
Mortise mount (Single swing)


The product is warranted against defects in material and workmanship while used in normal service for a period of
1 year from the date of sale to the original client. The GEM policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications without notice.

GIANNI INDUSTRIES, INC. Tel: +886-2-2267-7986 Fax: +886-2-2267-9876 2

www.gianni.com.tw [email protected]
 ML-655 Series Electro-Mechanical Lock
Installation Instruction

Unit: mm
Specification Dimension
3 3
21 21
Operating Voltage: 12~24VDC/AC ±10%
Current Draw: 250mA/12VDC; 150mA/24VDC
28
Operating Temperature: 14°F to 120°F (-10°C~+49°C) 28

Humidity: 0~85% non-condensing

Version Changeable: Fail-safe or Fail-secure

230

125
100
150
230

125
100
150

275
250
250
275
Lock bolt sensor switch output: SPDT, 3A/125VAC

78
78
Latch Throw:13mm
Solenoid testing: Tested to 250,000 cycles
Resistance against door being forced : 2 2

1500 lbs (static force); 70 ft-lbs (dynamic force)

Backset:
30 et 35 et
ks ks
ML-655M-30: 30mm Bac Bac
49 ML-655M-30 54 ML-655M-35
ML-655M-35: 35mm

Packing Contents Stud Bolt Position

For fail-safe mode

Lock Bolt
Nib

Strike Plate

Euro profile
key cylinder hole

For fail-secure mode

Version Changeable:
Take out the Screw 1 , release screw 2 , move the
position and then tighten both screws.
1
“Fail-Safe” “Fail-Secure”
(Power to Lock) (Power to Open)
2

Caution:
Do not completely remove screw 2 (as marked in the figure)
as the interior solenoid might fall off.

Copyright © All Rights Reserved. P-MU-ML-655 Published: 2020.12.09 3 -1

Installation Instructions
62mm cylinder for max •42mm door leaf
72mm cylinder for max •52mm door leaf

Unit:mm
Door Loop
(Optional)
f
Do lea
or Ø5.2 or
F ram Do
e

Ø5.2

The door loop protects the wiring

from damage at the door hinge.

275
250
150
150
100

28 (C
t
ylin
kse 0) de
Bac 55M-3 5) rn
ot
25 L-6 5M-3 inc
M
30 ( (ML-65 lud
e
35 d)
Attention! Please ensure
that the direction of the
template is correct

1 2 3 4
ø5.2
f a f
af Le
a Le
Fra Le f or Do
or
me or Le
a
Do
Do or
Do

Alignment CL
310
275

t
kse M)
Bac L-310 M)
(M 5
30 (ML-31
35

Align the center line (CL) of the lock body

template with the CL of the door leaf. Ensure Cut out mortise holes for the lock body and Tighten the fixing lugs with screws.
strike plate and drill holes according to the Drill and cut the hole for the lock cylinders
the CL of the strike plate template matches the as shown in the template.
lock body CL as closely as possible. templates.

5 6 7 8

a f Fra
Le f me
or a
Do Le
f or
ea Do
o rL
Do

Connect power cable to the lock and test Attach the cover plates for the cylinder lock
before screwing to the door leaf. Install the cylinder Fix the strike plate.

3-2
Copyright © All Rights Reserved. P-MU-ML-655 Published: 2020.12.09
 Wiring Diagram

For the 12~24VDC/AC operation only

Red

Access Control 12~24VDC/AC

N.C. contact (Fail-safe mode)
(Power input is polarity free)
Red Varistor N.O. contact (Fail-secure mode)

Yellow
Green
Blue
Lock bolt sensor switch output: SPDT, 3A/125VAC

NOTE: The varistor (or diode) must be connected across the terminals as shown above. This protects the
electromechanical lock from spikes and surges.

Butt Splice (IDC) Connector

Using crimper or pliers and pressing the header of

connector down to even position.

Copyright © All Rights Reserved. P-MU-ML-655 Published: 2020.12.09 3-3