AC-S4T

AcousticCoverage Series ™

AC-S4T
Small format, surface mount
loudspeaker

Features
Wide Area Paging ∙ Background Music ∙ Distance Conferencing
• High quality transducers provide
exceptional clarity through the
Reinforcement∙ Healthcare Facilities ∙ Concourses ∙ Transportation
critical voice range. Terminals ∙ Ancillary Support in Larger Systems
• Improved musicality often
The QSC AcousticCoverage™ Series To further enhance performance and speed
not seen in typical BGM class
AC-S4T is a surface mounted 4” two-way of install with optimum result, advanced
products.
loudspeaker with 70/100V transformer, voicing via QSC Intrinsic Correction™
• Ported baffle for increased low suitable for a wide variety of audio/video techniques are obtainable usingthe Q-SYS™
frequency extension down to conferencing reinforcement, voice paging Platform and in CXD Series amplifiers
70 Hz. and background music applications. for a complete QSC systems solution.

• Low saturation 70/100V AcousticCoverage™ Series is designed to Installers will appreciate the 4-pole
transformers with 8 ohm bypass. offer integrators a cost effective solution for Euroblock connector for loop thru wiring,
applications where voice reinforced located on the rear of the enclosure.
• 4-pole Euroblock connector coverage is of primary concern, while Eliminating the termination hassles of star
eases system wiring. providing improved musicality often not topology wiring designs, the generous
• Advanced voicing via QSC seen in typical BGM class products. Euroblock of the AC-S4T can accept four
Intrinsic Correction™, applied 18AWG pairs.
using the Q-SYS™ Platform or A high quality 100 mm [4 in] polypropylene
CXD Series amplifier platforms. cone transducer with butyl rubber surround The AC-S4T features brass inserts to
and a 25 mm [1 in] aluminium dome accept the included yoke mount and is
• Available in black (RAL 9011) or tweeter offers pristine clarity through the secured using the supplied thumb bolts.
white (RAL 9010) critical vocal range for increased speech The grille is adorned with a spring loaded
intelligibility. With 130 degrees of conical and rotatable logo for installation
• Complete EASE, CAD & BIM coverage, the AC-S4T reduces the number convenience in either horizontal or
information available online of loudspeakers required for even coverage vertical deployments.
in close proximity.
The AC-S4T is available in white (RAL
The UV treated high impact ABS enclosure 9010) or black (RAL 9011) to match
and ported baffle assembly has been complimenting QSC product families.
optimally tuned for added musicality, The AC-S4T may also be painted to
creating low frequency extension down to match any décor.
70 Hz. To maintain this frequency
response, the AC-S4T utilizes a 16-watt To assist in successful systems integration,
low-saturation and low-loss 70/100V complete EASE, CAD, and BIM files are
transformer with varying selectable taps, available for download online.
including an 8Ω bypass.
 AC-S4T Details
Beamwidth: Impedance / Frequence Response:

400 100 100

95 90
300

Impedance, Amplitude (ohm)

Sound Pressure, Level (dB)
Beamwidth (-6 dB) (deg)

90 80
200 85 70

80 60

100
70 40

70 65 30

60 20
50
55 10
500 1k 2k 5k 10k 20k
50 0
F requenc y (H z) 20 50 100 200 500 1k 2k 5k 10k 20k
Horizontal Frequenc y (H z)
Vertical
Frequency Response (Raw)

Frequency Response (Intrinsic Correction™)

Impedance (8 Ohm Bypass)

Dimensions: Specifications:
System Details AC-S4T
Effective frequency range1 70 Hz – 20 kHz
Rated noise power / voltage2 16 watts / 11.3 volts (rms)
Broad-band sensitivity3 85 dB SPL
Coverage angle (-6 dB) 130° conical (500 Hz - 5 kHz)

166 mm Directivity factor (Q) 6

[6.5 in] 150 mm
[5.9 in]
Directivity Index 8 dB
Maximum continuous SPL4 97 dB
Maximum peak SPL4 103 dB
Rated impedance 8 ohms
Recommended amplifier 32 watts
Transformer taps 70 V: 16, 8, 4, 2, 1 watts
100V: 16, 8, 4, 2 watts
8 ohm bypass
LF transducer 100 mm [4 in] Polypropylene woofer
25 mm [1 in] voice-coil
HF transducer 25 mm [1 in] Aluminium dome tweeter
25 mm [1 in] voice-coil
Input connector type Euroblock connector with parallel output
Enclosure material UV treated, high impact ABS polymer
Grille material Powder coated steel
Yoke material Powder coated steel, brass inserts
Enclosure Details

230 mm Ingress protection IP-44

[9.1 in] Operating environment Designed for indoor use
Operating Temperature Range -20 to 50° C [-4 to 122° F]
Net weight 2.4 kg [5.3 lb]
Product dimensions 230 x 160 x 150 mm [9.1 x 6.3 x 5.9 in]
Shipping weight 5.3 kg [11.8 lb] (pair packed)
Shipping dimensions 292 x 206 x 368 mm [11.5 x 8.1 x 14.5 in] (pair packed)
Included accessories Yoke mount system, euroblock connector

1
Free-field, -10 dB from on-axis sensitivity
160 mm 2
IEC60268-1 noise signal for 2 hours
[6.3 in] 3
On-Axis, free-field sensitivity, 2.83V, 1 m
4
Calculated from rated noise voltage and sensitivity

As part of QSC’s ongoing commitment to product development, specifications are subject

to change without notice.

1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
please recycle
© 2016 QSC, LLC all rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries.
AcousticCoverage, Intrinsic Correction and Q-SYS are trademarks of QSC. All other trademarks are the property of their respective owners. Patents may apply or be pending.

AC-S4T Spec Sheet 12/02/2016