UNIT 2

ELECTRONIC DEVICES AND DIGITAL SYSTEMS

Multiple Choice Questions
1. IGBT combines into it the advantages of both
a) MOSFET and BJT b) SCR and BJT
c) SCR and Diode d) BJT and Diode
2 The devices that are designed to convert the DOC signal into ac signal are known an
a) AC rectifier b) Inverter
c) DC rectifier d) Rectifier

3. Which of the following is not a ternminal of BJT?

a) Emitter b) Base
c) Collector d) Gate

4. FPGA stands for

a) Flexible Programmable Gate Array
b) Field Programmable Gate Acceleration
c) Flexible Programmable Gate Acceleration
d) Field Programmable Gate Array
5. The Algebraic function for Ex-NOR Gate is
a) A'B+AB b) AB+A'B'
c) AB+A'B d) AB+AB'
6. The minimal SOP for the function Y(A, B, C)= Xm(0,1,2,3,4,5,6,7)
Y(A,B, C) = Zm(0,1,2,3,4,5,6,7) is
a) 0 b) 1
c) A d) A'

7. A product term containing all the inputs of the functions in either complemented or
uncomplemented form is called
a) MAXTERM b) SOP
c) MINTERM d) POS
8. Simplified Boolean expression of Y(A,B,C) = m(0,1,2,3,6) using K-map is
a) A+BC" b) A+BC
c) A'+BC d) A'+BC'
 Model Question Puper 215
Which of the following is not a valid type of BJT?
9.
a) PNP
b) NPN
c) PPN
d) NNP
10. The
minimal SOP for the function
Y(A,B,C) =
a)0 }m0,1,2,3,4,5,6,7) is
b) 1
c) A
d) A'
1. The
knee voltage of silicon diode is
a) 0.2
b) 0.7V
c) 0.8 V

12. Which among the following is a current controlled device?

a) BJT
b) MOSFET
c) JFET
d) Diode
12 The output of a logic gate 1S "T when all its input is at logic "0. The gate is
a) AND b) EX-OR
c) OR d) EX-NOR
14 Among the following, which transistor has silicon dioxide insulating layer?
a) BJT b) MOSFET
c) JFET d) Diode
15. Acombination of AND function and NOT function is results in
a) AND b) OR
c) NAND d) NOR
16. In an NPN transistors, the majority carriers in the base are
a) Free electrons b) Holes
c) Both holes and electrons d) Neither holes nor electrons

Short Answer Question

1. Draw the I-V characteristics of SCR.
L. Write down the truth table for EX-0R gate.
3. Compare BJT and FET.
4. Write the truth table for 3 input NAND gate.
J. Write short notes on
SCR.
Draw the input and output characteristics of atransistor in CE configuration.
 UNIT 3
ELECTRIC MACHINES AND DRIVES
Multiple Choice Questions
of
1. The direction induced EMF and induced current in the dc generator can
by be determined
a) Fleming's left hand rule b) Thumb rule
c) Lenz Law
d) Fleming's right hand rule
to step up transformer the magnitude relation of E, and E, is
a) E, = E,
b) E, > E,
c) E, > E, d) E, = 0
. ABLDC motor 1S a poly phase synchronous motor with a
a) Cage rotor
b) Permanent magnet rotor
c) Slip ring rotor d) Armature
4. The squirrel cage rotor is used in
a) 3phase induction motor b) DC motor
c) BLDCmotor d) Stepper motor
5. The transformer core is made up of laminations to reduce
a) Iron lOsses b) Hysteresis losses
c) Eddy current losses d) Stray losses
6. In a three phase induction motor, the three phase winding
R,Y,B are connected in
a) Series
b) Parallel
c) Series and parallel d) Star
7. A chopper is a device that converts
a) Fixed AC to variable AC b) Fixed DCto variable AC
c) Fixed AC tovariable DC d) Fixed DC to variable DC
8. Astep down transformer has a primary voltage and current of 1000 V, 20 A. Its secondary
voltage and current are
100 V, 200 A b) 10000 V, 2 A
c) 10000V, 20A d) 100V, 20A
3. The function of a commutator in DCgenerator is to
a) Convert DC to DC
b) Convert AC to DC
c) Convert AC to
AC d) Convert DC to AC
218 Electricaland Electronics Engineering
device
a
10. Stepper motor is
a) Mechanical b) Analog
d) Storage
c) Incremental
generator is
11. The function of brushes in a DC
b) To increase the current
a) To increase the voltage
the load d) Toprovide flux density in air gan
c) Tobring the power developed to
milliseconds, its frequency will be
12. A wave completed one cycle in 10 kHz
a) 50
a) 1
a) 10
a) 100
motor is usually made of
13. The stator frame of an induction
b) Cast iron
a) Silicon steel
c) Aluminium d) Bronze
is about
14. The efficiency of and induction motor
b) 80 - 90%
a) 100 %
d) Less than 50%
c) 50 - 90%
motor over conventional Dc
15. Which of the following is not an advantage of BLDC
Motor?
a) Less maintenance b) Long life
radiation d) Low cost
c) No risk of explosion or possibility of RF
in their rotor construction?
16. Among the following, which mnotor has permanent magnets
a) DC Motor b) Transformer
c) Induction Motor d) BLDCmotor

17. Fleming left hand rule is applicable to

b) Transformer
a) DC Motor
d) AC Motor
c) DC Generator

Short Answer Question

1. Write the working principle of DC generator
2. Write the working principle of DC motor
3. What is the function of commutator in DC generator?
4. Write the working principle of single phase transformer
5. List the main parts of DCmachine.
6. List the main parts of 3 phase induction motor
7. List the essential requirement of a transformer.