Scribd
Upload
70 views11 pages

Tutorial Solutions Chapter 3

The document discusses heat transfer through various materials using thermal resistance concepts. It analyzes several examples including a transparent film on a solid plate, a wall with single and double pane windows, heat transfer through aluminum bars and cylinders, and heat transfer from a ball. The examples are analyzed using assumptions of steady one-dimensional heat transfer, constant thermal properties, and negligible contact resistance.

Uploaded by

iB13e
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
70 views11 pages

Tutorial Solutions Chapter 3

The document discusses heat transfer through various materials using thermal resistance concepts. It analyzes several examples including a transparent film on a solid plate, a wall with single and double pane windows, heat transfer through aluminum bars and cylinders, and heat transfer from a ball. The examples are analyzed using assumptions of steady one-dimensional heat transfer, constant thermal properties, and negligible contact resistance.

Uploaded by

iB13e
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

Assumptions 1 Steady operating conditions exist.

2 Heat transfer is
one-dimensional. 3 Thermal properties are constant. 4 Heat transfer
by radiation is negligible. 5 Thermal contact resistance is negligible.
1 R  L f thermal conductivities of the transparent
Rconv  f
k f A film and the solid plate 0.05 W/m ∙ °C
hA and 1.2 W/m ∙ °C, respectively.
L
Rs  s Using the thermal resistance concept, the following
k s A equation is expressed:
T  Tb Tb  T2

Rconv  R f Rs

Tb  T2  1 L f 
T 
Tb  T2
Rs
 
Rconv  R f  Tb  
Ls / k s  h k f 
 Tb

(70  52) C  1 0.001 m 


T      70 C  127 C
0.013 m / 1.2 W/m  C  70 W/m  C 0.05 W/m  C 
2

The surface temperature of the transparent film is


T1  Tb Tb  T2

Rf Rs
Tb  T2 Tb  T2  L f 
  Tb
T1  R f  Tb 
Rs Ls / k s  k f 

(70  52) C  0.001 m 
T1     70 C  103 C
0.013 m / 1.2 W/m  C  0.05 W/m  C 
Assumptions 1 Heat transfer
through the wall is steady and
one-dimensional. 2 K - constant.
3 The furnace operates
continuously.
Thermal conductivities k = 0.026 W/m°C
for air, and 0.78 W/m°C for glass.
Assumptions 1 Heat transfer through the window is steady
2 Heat transfer is one-dimensional 3 Thermal conductivities
of the glass and air are constant. 4 Heat transfer by
radiation is disregarded.
Wall with single pane windows:
4th wall with double pane windows:
Assumptions 1 Steady operating conditions
exist. 2 Heat transfer is one-dimensional in
the axial direction since the lateral surfaces
of both cylinders are well-insulated. 3 K
constant
Properties Aluminum bars k = 176 W/m°C. The
contact conductance at the interface of
aluminum-aluminum plates for the case of
ground surfaces and of 20 atm  2 MPa pressure
is hc = 11,400 W/m2C .
Assumptions 1 Heat transfer is steady since
there is no indication of any change with time.
2 Heat transfer is one-dimensional since there
is thermal symmetry about the centerline and
no variation in the axial direction. 3 Thermal
conductivities are constant. 4 The thermal
contact resistance at the interface is
negligible.
Assumptions 1 Heat transfer from the ball is
steady since there is no indication of any
change with time. 2 Heat transfer is one-
dimensional since there is thermal symmetry
about the midpoint. 3 Thermal properties are
constant. 4 The thermal contact resistance at
the interface is negligible

You might also like