ER2 SERIES

Engineered to endure.
The ER2 electric hoist is designed for peak performance—even on the
toughest jobs in the toughest conditions. Its quiet operation and minimal
vibration lowers workplace noise pollution, helps reduce worker fatigue and
extends the life of the hoist. Practical durability at its best, the ER2 lets you
get the job done safely and worry-free.

Smart Brake Technology Variable Frequency Drive

The ER2‘s Guardian Smart Brake has an Kito’s 220 V and 440 V two-speed hoists
electrical fail-safe design that uses DC current come with a standard "under-the-cover"
to control brake activation. The fast activation variable frequency drive. This device works by
drastically reduces wear on the brake discs, varying the power to the motor, allowing you
preserving the correct brake gap. The result to adjust both the high and low speeds. The
is a maintenance-free braking system with a VFD also adds soft-start/soft-stop operation
10-year/2,000,000 activation cycle warranty. to reduce shock loads, swing and bounce,
giving you more precise load control and
EXTREME-DUTY TEFC MOTOR increasing the life of the hoist.
Equipped with thermal overload protection
and cooling fins on all four sides of the motor Count Hour Meter
housing, the ER2's totally enclosed fan- The count hour meter records the hoist’s
cooled motor (TEFC) efficiently dissipates starts and run time. This gives maintenance
heat, allowing for industry-leading duty personnel an accurate record of the hoist's
ratings. operating profile, letting them customize its
maintenance schedule to optimize the hoist’s
State-Of-The-Art Chain Technology life and improve workplace safety.
The ER2 uses Kito’s world-class, super-
strength chain. Its shorter and narrower link
profile allows for greater surface area contact,
giving it better wear resistance and overall
tensile strength.

WWW.KITO.CA | 1.888.322.KITO (5486) 1

All specifications, dimensions and drawings are available at www.kito.ca, or call our Customer Service staff for friendly and expert advice on models and options.
POWERED HOISTS &
TROLLEYS
ER2 SERIES
CAPACITY CHAIN GUIDE BRAKE
Single Speed: 1/8 to 20 metric tonnes Long-lasting, heavy-duty cast iron DC current electromagnetic brake stays
Dual Speed: 1/8 to 20 metric tonnes construction, easily replaced without engaged until powered (Industry leading
disassembling hoist 10 year warranty)
STANDARDS Minimum brake torque of 200% at full load

CSA approved
HOOKS
ASME B30.16 Forged carbon steel opens gradually
MOTOR
ASME H4 without fracturing under excessive loads. Three phase
IP55 dust-tight and watertight Bottom hook swivels 360 degrees Standard Voltage: 220/440/575 volts
Self-closing top and bottom hooks with 60 hertz
OPTIONS heavy-duty hook latch Class B
Extreme duty, totally enclosed, fan-cooled
Plastic, canvas or steel chain containers
Long lift chain container
CONTROLS (TEFC) squirrel cage
Motor fin, fan blade and fan cover design
Lift lengths can be customized to suit Controls located on a central electrical for optimum air flow
requirements panel
Plain, geared, or motorized trolley mount Control Voltage: 110 volts
Simple to operate plug-in connectors
OVERLOAD PROTECTION
BODY Adjustable, dual-speed, under-the-cover Friction clutch located in the gearbox
VFD (220 and 440 volt dual speed between motor and load gear prevents
Die cast aluminum frame models) damage to hoist in the event of excessive
Completely sealed body for environmental (Optional) Ergonomic Cylinder Control overloading
protection Ideal for repetitive tasks- available in
Low headroom Adjustable 2-speed (220/440 volt) Dual OVERTRAVEL
Speed (575 volt)
GEARS PROTECTION
Precision, induction-heated, durable alloy ERGONOMIC Limit switch disables controls when load
block reaches upper or lower travel limit
steel helical gears submersed in an oil PUSHBUTTON STATION
bath
Impact-resistant plastic with molded strain OPERATING CONDITIONS
relief to prevent damage from pulling on
LOAD CHAIN the push button cord Recommended for -20˚ to +40˚ C and
IP65 dust-tight and watertight humidity of 85% or lower
Ultra-strong high-performance nickel-
plated load chain, with unique short link
pitch for greater resistance to fatigue and BEARINGS
wear, and corrosion resistant
High-quality, anti-friction ball and roller
Grade 80
design

WWW.KITO.CA | 1.888.322.KITO (5486) 2

All specifications, dimensions and drawings are available at www.kito.ca, or call our Customer Service staff for friendly and expert advice on models and options.
POWERED HOISTS &
TROLLEYS
ER2
SINGLE SPEED - 220/440/575V
MOTORIZED TROLLEY MOUNT

Dual Fall; *For informational purposes Single Fall; *For informational

only, contact KITO for dimensional purposes only, contact KITO for
drawing dimensional drawing

DIMENSIONS
Capacity (tonne) Model a B (in) C (Inches) D e f g h j k m u q
1/8 ER2M001H 179 2.25 - 6.0 14.8 550 220 315 27 130 22 109 23.5 478 505
1/4 ER2M003S 179 2.25 - 6.0 14.8 550 220 315 27 130 22 109 23.5 478 505
1/2 ER2M005L 179 2.25 - 6.0 15.6 630 220 315 27 130 22 109 23.5 513 505
1/2 ER2M005S 179 2.25 - 6.0 15.6 630 220 315 27 130 22 109 23.5 510 505
1 ER2M010L 179 2.25 - 6.0 17 730 220 315 31 130 22 109 31 589 505
1 ER2M010S 179 2.25 - 6.0 17 730 220 315 31 130 22 109 31 598 505
1 1/2 ER2M015S 184 3.25 - 7.0 20 830 225 325 34 125 27 118 36.5 646 535
2 ER2M020L 184 3.25 - 7.0 22 830 225 325 39 125 27 118 43.5 646 535
2 ER2M020S 184 3.25 - 7.0 23 830 225 325 39 125 27 118 43.5 703 535
2 1/2 ER2M025S 186 3.25 - 7.0 24.4 830 226 340 39 131 29 132 43.5 736 610
3 ER2M030S 186 3.25 - 7.0 32 900 226 340 44 131 29 132 47.5 703 610
5 ER2M050S 192 4.0 - 7.5 35 910 281 400 47 145 44 150 56 736 655

SPECIFICATIONS
Rated Current
Speed (ft/min) (amps) Ship
Capacity Standard Hoist Trolley Hoist Motor Headroom Load Chain Load Chain Weight Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing H.P. (in) 220V 440V 575V Code Falls (lbs) of Lift (lbs)

1/8 ER2M001H 10 55 40 0.75 14.8 6.6 3.3 2.5 KER2043 1 128 1.4
1/4 ER2M003S 10 36 40 0.75 14.8 6.6 3.3 2.5 KER2043 1 128 1.4
1/2 ER2M005L 10 15 40 0.75 15.6 6.6 3.3 2.5 KER2060 1 141 2.7
1/2 ER2M005S 10 29 40 1.2 15.6 8 4.1 2.9 KER2060 1 150 2.7
1 ER2M010L 10 14 40 1.2 17 8 4.1 2.9 KER2077 1 172 4.5
1 ER2M010S 10 28 40 2.4 17 11.8 5.8 4.4 KER2077 1 187 4.5
1 1/2 ER2M015S 10 18 40 2.4 20 11.8 5.8 4.4 KER2102 1 244 8
2 ER2M020L 10 14 40 2.4 22 11.8 5.8 4.4 KER2102 1 246 8
2 ER2M020S 10 28 40 4.7 23 19.6 9.5 7.3 KER2102 1 286 8
2 1/2 ER2M025S 10 22 40 4.7 24.4 19.6 9.5 7.3 KER2112 1 334 9.5
3 ER2M030S 10 17 40 4.7 32 19.6 9.5 7.3 KER2102 2 341 16
5 ER2M050S 10 11.5 40 4.7 35 21.5 10.4 8 KER2112 2 444 19

|
ER2
DUAL SPEED HOIST - 575V
MOTORIZED TROLLEY MOUNT

Dual Fall; *For informational purposes SIngle Fall; *For informational

only, contact KITO for dimensional purposes only, contact KITO for
drawing dimensional drawing

DIMENSIONS
Capacity (tonne) Model a B (in) C (Inches) D e f g h j k m u q
1/8 ER2MD001HD 179 2.25 - 6.0 14.8 550 268 315 27 130 22 109 23.5 478 505
1/4 ER2MD003SD 179 2.25 - 6.0 14.8 550 268 315 27 130 22 109 23.5 478 505
1/2 ER2MD005LD 179 2.25 - 6.0 15.6 630 268 315 27 130 22 109 23.5 513 505
1/2 ER2MD005SD 179 2.25 - 6.0 15.6 630 268 315 27 130 22 109 23.5 533 505
1 ER2MD010LD 179 2.25 - 6.0 17 730 268 315 31 130 22 109 31 589 505
1 ER2MD010SD 179 2.25 - 6.0 17 730 268 315 31 130 22 109 31 615 505
1 1/2 ER2MD015SD 184 3.25 - 7.0 20 830 273 325 34 125 27 118 36.5 646 535
2 ER2MD020LD 184 3.25 - 7.0 22 830 273 325 39 125 27 118 43.5 646 535
2 ER2MD020SD 184 3.25 - 7.0 23 830 273 325 39 125 27 118 43.5 737 535
2 1/2 ER2MD025SD 186 3.25 - 7.0 24.4 830 274 340 39 131 29 132 43.5 736 610
3 ER2MD030SD 186 3.25 - 7.0 32 900 274 340 44 131 29 132 47.5 737 610
5 ER2MD050SD 192 4.0 - 7.5 35 910 281 400 47 145 44 150 56 736 655

SPECIFICATIONS
Speed (ft/min)
Ship
Capacity Standard Hoist Trolley Hoist Headroom Rated Current Load Chain Load Chain Weight Weight per Additional 5ft
(tonne) Model Lift (ft) Lifting Traversing Motor H.P. (in) (amps) 575V Code Falls (lbs) of Lift (lbs)
1/8 ER2MD001HD 10 57/14 80/20 0.7/0.2 14.8 2.5/1.7 KER2043 1 143 1.4
1/4 ER2MD003SD 10 28/7 80/20 0.7/0.2 14.8 2.5/1.7 KER2043 1 143 1.4
1/2 ER2MD005LD 10 14/4 80/20 0.7/0.2 15.6 2.5/1.7 KER2060 1 158 2.7
1/2 ER2MD005SD 10 28/7 80/20 1.2/0.3 15.6 2.8/2.2 KER2060 1 170 2.7
1 ER2MD010LD 10 14/4 80/20 1.2/0.3 17 2.8/2.2 KER2077 1 198 4.5
1 ER2MD010SD 10 28/7 80/20 2.4/0.6 17 4.3/2.8 KER2077 1 203 4.5
1 1/2 ER2MD015SD 10 19/5 80/20 2.4/0.6 20 4.3/2.8 KER2102 1 255 8
2 ER2MD020LD 10 14/4 80/20 2.4/0.6 22 4.3/2.8 KER2102 1 259 8
2 ER2MD020SD 10 27/6 80/20 4.7/1.2 23 7.1/4.2 KER2102 1 308 8
2 1/2 ER2MD025SD 10 22/5 80/20 4.7/1.2 24.4 7.3/4.5 KER2112 1 348 9.5
3 ER2MD030SD 10 17/4 80/20 4.7/1.2 32 7.3/4.5 KER2102 2 359 16
5 ER2MD050SD 10 11/2 80/20 4.7/1.2 35 7.3/4.5 KER2112 2 460 19

WWW.KITO.CA | 1.888.322.KITO (5486) 14

All specifications, dimensions and drawings are available at www.kito.ca, or call our Customer Service staff for friendly and expert advice on models and options.
POWERED HOISTS &
TROLLEYS