Lab - Using Windows PowerShell

Objectives
The objective of the lab is to explore some of the functions of PowerShell.
Part 1: Access PowerShell console.
Part 2: Explore Command Prompt and PowerShell commands.
Part 3: Explore cmdlets.
Part 4: Explore the netstat command using PowerShell.
Part 5: Empty recycle bin using PowerShell.

Background / Scenario
PowerShell is a powerful automation tool. It is both a command console and a scripting language. In this lab,
you will use the console to execute some of the commands that are available in both the command prompt
and PowerShell. PowerShell also has functions that can create scripts to automate tasks and work together
with the Windows Operating System.

Required Resources
 1 Windows PC with PowerShell installed and internet access

Instructions

Part 1: Access PowerShell console.

a. Click Start. Search and select powershell.
b. Click Start. Search and select command prompt.

Part 2: Explore Command Prompt and PowerShell commands.

Question:
a. Enter dir at the prompt in both windows.
What are the outputs to the dir command?

Page 1 of 6
Lab - Using Windows PowerShell

-
- 2 цонхонд нэг командыг бичиж ажиллуулахад гаралт ерөнхийдөө ижилхэн directory-ын он сар,
нэр зэрэг байсан. Харин command prompt дээр файлын тоо, хэмжээг заасан нь ялгаатай
байлаа.

Question:
b. Try another command that you have used in the command prompt, such as ping, cd, and ipconfig.
What are the results?
Хоёулан дээр нь бичиж үзэхэд яг адилхан ажиллаж байна.

Part 3: Explore cmdlets.

a. PowerShell commands, cmdlets, are constructed in the form of verb-noun string. To identify the
PowerShell command to list the subdirectories and files in a directory, enter Get-Alias dir at the
PowerShell prompt.
PS C:\Users\CyberOpsUser> Get-Alias dir

CommandTypeNameVersionSource
----------------------------
Aliasdir -> Get-ChildItem
Question:

What is the PowerShell command for dir?

Type your answers here.

b. For more detailed information about cmdlets, perform an internet search for Microsoft powershell
cmdlets.

Page 2 of 6
Lab - Using Windows PowerShell

c. Close the Command Prompt window when done.

Part 4: Explore the netstat command using PowerShell.

a. At the PowerShell prompt, enter netstat -h to see the options available for the netstat command.
PS C:\Users\CyberOpsUser> netstat -h

Displays protocol statistics and current TCP/IP network connections.

NETSTAT [-a] [-b] [-e] [-f] [-n] [-o] [-p proto] [-r] [-s] [-x] [-t] [interval]
-a Displays all connections and listening ports.
-b Displays the executable involved in creating each connection or listening port.
In some cases well-known executables host multiple independent components, and in
these cases the sequence of components involved in creating the connection or
listening port is displayed. In this case the executable name is in [] at the bottom,
on top is the component it called, and so forth until TCP/IP was reached. Note that
this option can be time-consuming and will fail unless you have sufficient
permissions.
<some output omitted>

b. To display the routing table with the active routes, enter netstat -r at the prompt.
PS C:\Users\CyberOpsUser> netstat -r
===========================================================================
Interface List
3...08 00 27 a0 c3 53 ......Intel(R) PRO/1000 MT Desktop Adapter
10...08 00 27 26 c1 78 ......Intel(R) PRO/1000 MT Desktop Adapter #2
1...........................Software Loopback Interface 1
===========================================================================

IPv4 Route Table

===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.5 25
127.0.0.0 255.0.0.0 On-link 127.0.0.1 331
127.0.0.1 255.255.255.255 On-link 127.0.0.1 331
127.255.255.255 255.255.255.255 On-link 127.0.0.1 331
169.254.0.0 255.255.0.0 On-link 169.254.181.151 281
169.254.181.151 255.255.255.255 On-link 169.254.181.151 281
169.254.255.255 255.255.255.255 On-link 169.254.181.151 281
192.168.1.0 255.255.255.0 On-link 192.168.1.5 281
192.168.1.5 255.255.255.255 On-link 192.168.1.5 281
192.168.1.255 255.255.255.255 On-link 192.168.1.5 281
224.0.0.0 240.0.0.0 On-link 127.0.0.1 331
224.0.0.0 240.0.0.0 On-link 192.168.1.5 281
224.0.0.0 240.0.0.0 On-link 169.254.181.151 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 331
255.255.255.255 255.255.255.255 On-link 192.168.1.5 281
255.255.255.255 255.255.255.255 On-link 169.254.181.151 281
===========================================================================
Persistent Routes:

Page 3 of 6
Lab - Using Windows PowerShell

None

IPv6 Route Table

===========================================================================
Active Routes:
If Metric Network Destination Gateway
1 331 ::1/128 On-link
3 281 fe80::/64 On-link
10 281 fe80::/64 On-link
10 281 fe80::408b:14a4:7b64:b597/128
On-link
3 281 fe80::dd67:9e98:9ce0:51e/128
On-link
1 331 ff00::/8 On-link
3 281 ff00::/8 On-link
10 281 ff00::/8 On-link
===========================================================================
Persistent Routes:
None
Question:

What is the IPv4 gateway?

Type your answers here.

c. Open and run a second PowerShell with elevated privileges. Click Start. Search for PowerShell and right-
click Windows PowerShell and select Run as administrator. Click Yes to allow this app to make
changes to your device.

d. The netstat command can also display the processes associated with the active TCP connections. Enter
the netstat -abno at the prompt.
PS C:\Windows\system32> netstat -abno

Active Connections

Proto Local Address Foreign Address State PID

TCP 0.0.0.0:135 0.0.0.0:0 LISTENING 756
RpcSs
[svchost.exe]
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING 4
Can not obtain ownership information
TCP 0.0.0.0:49664 0.0.0.0:0 LISTENING 444

Page 4 of 6
Lab - Using Windows PowerShell

Can not obtain ownership information

TCP 0.0.0.0:49665 0.0.0.0:0 LISTENING 440
Schedule
[svchost.exe]
TCP 0.0.0.0:49666 0.0.0.0:0 LISTENING 304
EventLog
[svchost.exe]
TCP 0.0.0.0:49667 0.0.0.0:0 LISTENING 1856
[spoolsv.exe]
TCP 0.0.0.0:49668 0.0.0.0:0 LISTENING 544
<some output omitted>

e. Open the Task Manager. Navigate to the Details tab. Click the PID heading so the PID are in order.
f. Select one of the PIDs from the results of netstat -abno. PID 756 is used in this example.
g. Locate the selected PID in the Task Manager. Right-click the selected PID in the Task Manager to open
the Properties dialog box for more information.

Question:

What information can you get from the Details tab and the Properties dialog box for your selected PID?
Type your answers here.

Part 5: Empty recycle bin using PowerShell.

PowerShell commands can simplify management of a large computer network. For example, if you wanted to
implement a new security solution on all servers in the network you could use a PowerShell command or
script to implement and verify that the services are running. You can also run PowerShell commands to
simplify actions that would take multiple steps to execute using Windows graphical desktop tools.
a. Open the Recycle Bin. Verify that there are items that can be deleted permanently from your PC. If not,
restore those files.
b. If there are no files in the Recycle Bin, create a few files, such as text file using Notepad, and place them
into the Recycle Bin.
c. In a PowerShell console, enter clear-recyclebin at the prompt.
PS C:\Users\CyberOpsUser> clear-recyclebin

Page 5 of 6
Lab - Using Windows PowerShell

Confirm
Are you sure you want to perform this action?
Performing the operation "Clear-RecycleBin" on target "All of the contents of the
Recycle Bin".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is
"Y"): y
Question:

What happened to the files in the Recycle Bin?

Type your answers here.

Reflection Question
PowerShell was developed for task automation and configuration management. Using the internet, research
commands that you could use to simplify your tasks as a security analyst. Record your findings.
Type your answers her

ТАЙЛАНe.

End of document

Page 6 of 6