Product Highlights

10 Gigabit Connectivity
10G physical stacking and/or uplink eliminates the
bottleneck of stacking backbone servers and storage
accesses

Comprehensive Management
Intuitive graphical Web UI complete with 10 languages
for SMB; comprehensive Command Line Interface (CLI)
and SNMP for out-of-band console management

Layer 3 Functions
Wire-speed inter-VLAN routing helps by reducing the
pressure of routers and backbone networks, improving
overall network efficiency

DGS-1510 Series
Gigabit Stackable SmartPro Switches with 10G Uplinks
Features The DGS-1510 Series is D-Link’s latest generation of SmartPro switches with 10G port
connectivity, making them ideal for deployment in SME/SMB aggregation environments. The
Advanced Features
DGS-1510 Series provides a reliable and scalable interconnection between core switches and
t
Physical Stacking via two 10G ports, can stack up
to 6 devices edge switches. Available in 16, 24, or 48 10/100/1000 Mbps port models with additional fiber
t
Ethernet Ring Protection Switching (ERPS) ports for physical stacking and/or uplinks, the DGS-1510 Series are perfect for any business
t
Static Routing network environment.
t
Auto Surveillance VLAN
t
Auto Voice VLAN The DGS-1510 Series PoE-enabled switches are ideal for businesses looking to power VoIP
t
Loopback Detection phones, wireless access points, or network cameras. Both the DGS-1510-28P and DGS-1510-
t
LLDP/LLDP-MED 28XMP support up to 30W of power output, giving you flexible power allocation for a variety

Security Features of powered devices. This enables you to scale your operations to meet business growth and
t
Access Control List incorporate new technologies all with affordable installation costs.
t
D-Link Safeguard Engine
t
BPDU Attack Protection 10G SFP+ Stacking/Uplink Ports
t
ARP Spoofing Prevention
Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one
t
IP-MAC-Port Binding
or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 gigabit ports can be
t
DoS Attack Prevention
t
Clientless MAC/Web Access Control configured as a stack using optional direct attach cables to provide high bandwidth with cost
efficiency. Users can also easily configure and manage any of the DGS-1510 SmartPro series in
Intuitive Management
a single stack. With 20 Gbps full duplex capabilities, the DGS-1510 offers 10G connectivity to
t
Multi-language Web-based GUI
core networks and servers while still maintaining fast data transfer rates.
t
Built-in SNMP MIB for remote network
management systems
t
Comprehensive CLI support Layer 3 Traffic Management
t
Manageability for both IPv4/IPv6 environments
The DGS-1510 Series provides static routing, allowing you to segment your network into
t
Dual Image
workgroups and communicate across VLANs without degrading application performance.
t
D-Link Network Assistant (DNA) Utility for Easy
Installation With these capabilities, you can boost the efficiency of your network by offloading internal
t
Console interface for out-of-band management traffic-handling tasks from your router, allowing it to manage external traffic and security.
Green Technology
t
IEEE 802.3az Energy Efficient Ethernet
t
D-Link Green 3.0 power-saving features
 DGS-1510 Series
Gigabit Stackable SmartPro Switches with 10G Uplinks

Extensive Layer 2 Features IPv6 Ready

The DGS-1510 Series switches are equipped with a complete lineup of Layer The DGS-1510 Series is IPv6 ready and supports various IPv6 functions such
2 features, including IGMP Snooping, Port Mirroring, Spanning Tree, and Link as MLD Snooping, IPv6 ACL/QoS, and IP-MAC-Port Binding (IMPB) to ensure
Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows seamless integration of next generation networks. The DGS-1510 Series also
servers to directly connect to the switch for fast, reliable data transfer. Network supports an IPv4/v6 dual stack function that allows the switch to act as a
maintenance features include Loopback Detection and Cable Diagnostics; bridge between IPv4 and IPv6 networks.
Loopback Detection is used to detect loops created by a specific port or
VLAN and will automatically shut down the affected port or VLAN. The Cable Versatile Management
Diagnostics feature, designed primarily for administrators and customer The DGS-1510 Series supports virtual stacking via D-Link’s Single IP
service representatives, can determine cable quality and can quickly discover Management (SIM), allowing up to 32 devices to be managed via a single IP
sections of cabling that need to be replaced. address. This simplifies management of small workgroups or wiring closets
while reducing the number of IP addresses needed in your network.
Traffic Classification & QoS
The DGS-1510 Series provides a D-Link Network Assistant Utility and a web-
The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice
based management interface that enables administrators to easily set up
VLAN, which are best suited for VoIP and video surveillance deployments.
and remotely manage their networks. The D-Link Network Assistant Utility
Auto Surveillance VLAN is a new, industry-leading technology built into
allows customers to easily discover and perform initial setup on multiple
D-Link Smart Switches. This technology consolidates data and surveillance
D-Link products simultaneously. This greatly reduces the deployment time for
video transmission through a single SmartPro switch, sparing businesses
services required by network administrators such as device firmware upgrades,
the expense of maintaining expensive dedicated hardware and facilities.
configuration backup and restoration, setting IP addresses, or even solution
ASV also ensures the quality of real-time video for monitoring and control
deployment like ASV.
without compromising the transmission of conventional network data. The
Auto Voice VLAN technology enhances VoIP service by automatically placing The DGS-1510 Series also supports fully featured Command Line Interface (CLI)
voice traffic from an IP phone to an assigned VLAN. With higher priority and and SNMP MIBs. It provides the capability of central management in a large
an individual VLAN, these features guarantee the quality and security of VoIP scale network. CLI management of the switches is also available via a console
traffic. Furthermore, the DSCP markings on Ethernet packets enable different port. With out-of-band manageability, accessing the switch is still possible
levels of service to be assigned to network traffic. As a result, these voice and even if its network data plane is overwhelmed by bulk or malicious traffic.
video packets take precedence over other packets ensuring uninterrupted
VoIP for network users. Energy Efficient
DGS-1510 switches are capable of conserving power without sacrificing
Keep Your Network Secure operational performance or functionality by using D-Link Green 3.0
D-Link’s innovative Safeguard Engine protects DGS-1510 Series against traffic technology. Using the 802.3az Energy Efficient Ethernet standard, the network
flooding caused by malicious attacks. The series also supports 802.1X port- will automatically decrease power usage when traffic is low. For environments
based authentication, allowing the network to be authenticated through not fully supporting the standard, DGS-1510 switches offer advanced power-
external RADIUS servers. saving settings including port shutoff, LED shutoff, and system hibernation
based on custom scheduling profiles. The profiles can also be applied to the
The DGS-1510 Series supports both MAC and Web-based access control. These
PoE switch so that there is no unnecessary power consumption during off
provide a user-friendly way to alleviate deployment time, giving customers an
hours.
effective and efficient authentication choice.

With an Access Control List (ACL), the DGS-1510 Series both enhances network
security and helps to protect the internal IT network by screening ingress
traffic based on any user defined content. The DGS-1510 Series includes ARP
Spoofing Prevention, which protects from attacks on the Ethernet network
that may allow an intruder to sniff data frames, modify traffic, or bring traffic
to a halt altogether by sending fake ARP messages to the network. For added
security, the DHCP Server Screening feature screens rogue DHCP server
packets from user ports to prevent unauthorized IP assignment.
 DGS-1510 Series
Gigabit Stackable SmartPro Switches with 10G Uplinks

DGS-1510-20 DGS-1510-28

DGS-1510-28XMP
DGS-1510-28P

DGS-1510-28X DGS-1510-52

DGS-1510-52X
 DGS-1510 Series
Gigabit Stackable SmartPro Switches with 10G Uplinks

Technical Specifications - DGS-1510 Switches

General DGS-1510-20 DGS-1510-28 DGS-1510-52

IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit
Port Standards & Functions
Ethernet, 802.3ae 10 GbE, IEEE 802.3x Flow Control for Full-Duplex Mode, Auto-negotiation

16 10/100/1000 Mbps 24 10/100/1000 Mbps 48 10/100/1000 Mbps

Number of Ports 2 Gigabit SFP 2 Gigabit SFP 2 Gigabit SFP
2 10G SFP+ 2 10G SFP+ 2 10G SFP+

UTP Cat. 5, Cat. 5e (100 m max.)

Network Cables
EIA/TIA-568 100-ohm STP (100 m max.)

Full/Half Duplex Full/half duplex for 10/100 Mbps and Gigabit speed

Media Interface Exchange Auto or configurable MDI/MDIX

Performance

Switching Capacity 76 Gbps 92 Gbps 140 Gbps

Transmission Method Store-and-forward

MAC Address Table Up to 16,000 entries per device

MAC Address Update Up to 512 static MAC entries

Enable/disable auto-learning of MAC addresses

Maximum 64 bytes Packet 56.54 Mpps 68.45 Mpps 104.16 Mpps

Forwarding Rate

Packet Buffer Memory 1.5 MB per device 3 MB per device

MTBF 882152.37 hours 516593.25 hours 433434.16 hours

Physical & Environment

AC Input 100 to 240 VAC 50/60 Hz internal universal power supply

Maximum Power Consumption 20.3 W 24 W 38.4 W

Standby Power Consumption 12.2 W 15.2 W 27.6 W

Smart Fan Quantity 1 1 2

Acoustics 43.8 dB(A) 43.8 dB(A) 44.2 dB(A)

Heat Dissipation 41.602 BTU/hr 72.292 BTU/hr 130.944 BTU/hr

Operating Temperature -5 to 50 ˚C (23 to 122 ˚F)

Storage Temperature -20 to 70˚C (-4 to 158 ˚F)

Operating Humidity 0% to 95% non-condensing

Storage Humidity 0% to 95% non-condensing

280 x 180 x 44 mm 440 x 210 x 44 mm 440 x 250 x 44 mm

Dimensions (11 x 7.09 x 1.73 inches) (17.36 x 8.26 x 1.73 inches) (17.36 x 9.84 x 1.73 inches)
19” standard rack mounting 19” standard rack mounting 19” standard rack mounting
width, 1U height width, 1U height width, 1U height

Weight 1.24 kg 2.00 kg 2.40 kg

Power/Stacking ID/Fan (per device), Link/Activity/Speed (per 10/100/1000 Mbps port),

Diagnostic LEDs
Link/Activity/Speed (per Gigabit SFP port), Link/Activity/Speed (per 10G SFP+ port)

Certifications CE, FCC, C-Tick, VCCI, BSMI, CCC CE, FCC, C-Tick, VCCI, BSMI, CCC, IPv6 Ready Logo Phase 2

Safety cUL, CB
 DGS-1510 Series
Gigabit Stackable SmartPro Switches with 10G Uplinks

Technical Specifications - DGS-1510 Switches

General DGS-1510-28X DGS-1510-52X

IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit
Port Standards & Functions
Ethernet, 802.3ae 10 GbE, IEEE 802.3x Flow Control for Full-Duplex Mode, Auto-negotiation

Number of Ports 24 10/100/1000 Mbps, 4 10G SFP+ 48 10/100/1000 Mbps, 4 10G SFP+

Network Cables UTP Cat. 5, Cat. 5e (100 m max.); EIA/TIA-568 100-ohm STP (100 m max.)

Full/Half Duplex Full/half duplex for 10/100 Mbps and Gigabit speed

Media Interface Exchange Auto or configurable MDI/MDIX

Performance

Switching Capacity 128Gbps 176Gbps

Transmission Method Store-and-forward

MAC Address Table Up to 16,000 entries per device

MAC Address Update Up to 512 static MAC entries, Enable/disable auto-learning of MAC addresses

Maximum 64 byte Packet Forwarding Rate 95.24Mpps 130.95Mpps

Packet Buffer Memory 1.5 MB per device 3MB per device

MTBF 516593.25 hours 416789.03 hours

Physical & Environment

AC Input 100 to 240 VAC 50/60 Hz internal universal power supply

Maximum Power Consumption 22.3 W 44.2 W

Standby Power Consumption 15.2 W 28.9 W

Smart Fan Quantity 1 2

Acoustics 42.7 dB(A) 45.8 dB(A)

Heat Dissipation 76.043 BTU/hr 138.787 BTU/hr

Operating Temperature -5 to 50 ˚C (23 to 122 ˚F)

Storage Temperature -20 to 70˚C (-4 to 158 ˚F)

Operating Humidity 0% to 95% non-condensing

Storage Humidity 0% to 95% non-condensing

Dimensions 440mm x 210mm x 44mm 440mm x 250mm x 44mm

Weight 2.00 kg 2.40 kg

Power/Stacking ID/Fan (per device), Link/Activity/Speed (per 10/100/1000 Mbps port), Link/
Diagnostic LEDs
Activity/Speed (per Gigabit SFP port), Link/Activity/Speed (per 10G SFP+ port)

Certifications CE, FCC, C-Tick, VCCI, BSMI, CCC, IPv6 Ready Logo Phase 2

Safety cUL, CB
 DGS-1510 Series PoE
Gigabit Stackable SmartPro Switches with 10G Uplinks

Technical Specifications - DGS-1510 PoE Switches

General DGS-1510-28P DGS-1510-28XMP

IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit
Port Standards & Functions
Ethernet, 802.3ae 10 GbE, IEEE 802.3x Flow Control for Full-Duplex Mode, Auto-negotiation

Number of Ports 24 10/100/1000 Mbps PoE capable, 2 Gigabit SFP, 2 10G SFP+ 24 10/100/1000 Mbps PoE capable, 4 10G SFP+

Network Cables UTP Cat. 5, Cat. 5e (100 m max.); EIA/TIA-568 100-ohm STP (100 m max.)

Full/Half Duplex Full/half duplex for 10/100 Mbps and Gigabit speed

Media Interface Exchange Auto or configurable MDI/MDIX

Performance

Switching Capacity 92 Gbps 128 Gbps

Transmission Method Store-and-forward

MAC Address Table Up to 16,000 entries per device

MAC Address Update Up to 512 static MAC entries, enable/disable auto-learning of MAC addresses

Maximum 64 bytes Packet 68.45 Mpps 95.24 Mpps

Forwarding Rate

Packet Buffer Memory 1.5 MB per device

MTBF 275428.54 hours 274796.39 hours

PoE

PoE Standard IEEE 802.3af, 802.3at

PoE Capable Ports Ports 1 to 24: Up to 30 W

PoE Power Budget Max. 193 W Max. 370 W

Physical & Environment

AC Input 100 to 240 VAC 50/60 Hz internal universal power supply

Maximum Power Consumption 238.7 W (PoE on), 29 W (PoE off) 436.3 W (PoE on), 38.4 W (PoE off)

Standby Power Consumption 21 W 28.3 W

Smart Fan Quantity 2

Acoustics 46.4 dB(A) 56.9 dB(A)

Heat Dissipation 813.967 BTU/hr 1487.783 BTU/hr

Operation Temperature -5 to 50 ˚C (23 to 122 ˚F)

Storage Temperature -20 to 70˚C (-4 to 158 ˚F)

Operation Humidity 0% to 95% non-condensing

Storage Humidity 0% to 95% non-condensing

440 x 210 x 44 mm (17.36 x 8.26 x 1.73 inches) 440 x 308 x 44 mm ( 17.36 x 12.12 x 1.73 inches)
Dimensions
19” standard rack mounting width, 1U height 19” standard rack mounting width, 1U height

Weight 2.54 kg No 4.25 kg

Power/Stacking ID/Fan Error/PoE Push Button (per device), Link/Activity/Speed/PoE Mode (per 10/100/1000
Diagnostic LEDs
Mbps port), Link/Activity/Speed (per SFP port), Link/Activity/Speed (per 10G SFP+ port)

Certifications CE, FCC, C-Tick, VCCI, BSMI, CCC CE, FCC, C-Tick, VCCI, BSMI, CCC , IPv6 Ready Logo Phase 2

Safety cUL, CB
 DGS-1510 Series
Gigabit Stackable SmartPro Switches with 10G Uplinks

Software Features

Stackability t
Virtual Stacking Support t
Physical Stacking

t
D-Link Single IP Management t
Supports Duplex Chain/Ring topology
t
Up to 32 devices per virtual stack t
Up to 40G stacking bandwidth full duplex
t
Up to 20G stacking bandwidth t
Up to 6 units per stack

L2 Features t
MAC Address Table: Up to 16K t
Spanning Tree Protocol

t
Flow Control t
802.1D STP
t
802.3x Flow Control t
802.1w RSTP
t
HOL Blocking Prevention t
802.1s MSTP
t
Jumbo Frame up to 9000 Bytes t
Loopback Detection
t
IGMP Snooping t
802.3ad Link Aggregation
t
IGMP v1/v2 Snooping t
Max. 32 groups per device/8 ports per group
t
IGMP v3 awareness t
Port Mirroring
t
Supports 512 IGMP groups t
Support 4 mirroring groups
t
Supports 128 static multicast addresses t
One-to-One, Many-to-One
t
IGMP per VLAN t
Supports Mirroring for Tx/Rx/Both
t
Supports IGMP Snooping Querier t
Multicast Filtering
t
Host-based IGMP Snooping Fast Leave t
Forwards all unregistered groups
t
MLD Snooping t
Filters all unregistered groups
t
Supports MLD v1/v2 awareness t
Ethernet Ring Protection Switching (ERPS)
t
Supports 512 groups
t
Supports 128 Static Multicast Addresses
t
Per VLAN MLD Snooping
t
Host-based MLD Fast Leave
t
MLD Snooping Querier

VLAN t
802.1Q Tagged VLAN t
Asymmetric VLAN

t
4K VLAN Groups t
Auto Voice VLAN
t
Configurable VID: 0~4094 t
Auto Surveillance VLAN
t
GVRP

Quality of Service (QoS) t
CoS based on t
802.1p Quality of Service

t
802.1p priority t
Queue Handling
t
VLAN t
Strict Priority Queue (SPQ
t
MAC address t
Weighted Round Robin (WRR)
t
Ether type t
Deficit Round Robin (DRR)
t
IP address t
SPQ + WRR
t
DSCP t
8 queues per port
t
Protocol type t
Bandwidth Control
t
TCP/UDP port number t
Port-based (Ingress/Egress, min. granularity for
t
DSCP of IPv6 Traffic Class 10/100/1000 BASE-T ports is 64 Kb/s)
t
IPv6 flow label

L3 Features t
ARP t
Default Routing

t
256 Static ARP t
Static Routing
t
Supports Gratuitous ARP t
64 IPv4 Static Route Entries
t
IPv6 Neighbour Discovery (ND) t
32 IPv6 Static Route Entries
t
16 IP interfaces

Access Control List (ACL) t
ACL based on t
ACL Actions

t
802.1p priority t
Permit
t
VLAN t
Deny
t
MAC address t
Max. 256 access list
t
Ether type t
Max. 768 rules
t
IP address t
Single or multiple ports (each rule)
t
DSCP t
Time-based ACL
t
Protocol type t
ACL Statistics
t
TCP/UDP port number
t
DSCP of IPv6 Traffic Class
t
IPv6 flow label

Security t
Port Security t
SSL

t
Supports up to 128 MAC addresses per port t
Supports v1/v2/v3
t
Broadcast/Multicast/Unicast Storm Control t
Supports IPv4/IPv6
t
Dynamic ARP Inspection t
Traffic Segmentation
t
Static MAC t
IP-MAC-Port Binding
t
D-Link Safeguard Engine t
DHCP snooping
t
DHCP Server Screening t
IP Source Guard
t
ARP Spoofing Prevention t
Dynamic ARP Inspection
t
Max. 64 entries t
IPv6 DHCP Guard
t
SSH t
IPv6 RA Guard
t
Supports v2 t
IPv6 Snooping
t
Supports IPv4/IPv6 t
IPv6 Source Guard
t
BPDU Attack Protection t
IPv6 ND Inspection
t
DoS Attack Prevention

AAA t
Compound Authentication t
MAC-based Access Control (MAC)

t
802.1X Port and MAC-based Authentication t
Port-based Access Control
t
Supports RADIUS and Local Server t
Host-based Access Control
t
Supports EAP, OTP, TLS, TTLS, PEAP t
Dynamic VLAN Assignment
t
Web-based Access Control (WAC) t
Japan Web-based Access Control (JWAC)
t
Port-based Access Control t
Port-based Access Control
t
Host-based Access Control t
Host-based Access Control
t
Dynamic VLAN Assignment t
Dynamic VLAN Assignment
t
Guest VLAN
t
RADIUS and TACACS+ authentication for switch access
t
RADIUS and TACACS+ accounting
 DGS-1510 Series
Gigabit Stackable SmartPro Switches with 10G Uplinks

Software Features

OAM t
Cable Diagnostics t
Factory Reset

t
sFlow

Management t
Command Line Interface (CLI) t
DHCP Client

t
Telnet Server t
D-Link Network Assistant support
t
TFTP Client t
SNTP
t
IPv6 Neighbor Discovery t
ICMPv6
t
Configurable MDI/MDIX t
IPv4/v6 Dual Stack
t
SNMP t
DHCP Auto Configuration
t
Supports v1, v2c, v3 t
RMON v1
t
SNMP Trap t
LLDP, LLDP-MED
t
System Log t
DHCP relay
t
Max. 10,000 log entries t
Web-based GUI
t
Debug command t
TFTP Client
t
Dual images t
NTP

D-Link Green 3.0 Technology t
Power Saving by: t
System Hibernation mode
t
Link Status t
Time-based PoE (PoE model only)
t
LED or Port Shutoff

Order Information
Product Number Desciption

DGS-1510-20 16 10/100/1000 Mbps, 2 Gigabit SFP and 2 10G SFP+

DGS-1510-28 24 10/100/1000 Mbps, 2 Gigabit SFP and 2 10G SFP+

DGS-1510-52 48 10/100/1000 Mbps, 2 Gigabit SFP and 2 10G SFP+

DGS-1510-28X 24 10/100/1000Mbps and 4 10G SFP+

DGS-1510-52X 48 10/100/1000Mbps and 4 10G SFP+

DGS-1510-28P 24 10/100/1000 Mbps PoE capable, 2 Gigabit SFP and 2 10G SFP+

DGS-1510-28XMP 24 10/100/1000 Mbps PoE capable, 4 10G SFP+

 DGS-1510 Series
Gigabit Stackable SmartPro Switches with 10G Uplinks

Optional SFP Transceivers

DEM-310GT 1000BASE-LX, single-mode, 10 km

DEM-311GT 1000BASE-SX, multi-mode, 550 m

DEM-312GT2 1000BASE-SX, multi-mode, 2 km

DEM-314GT 1000BASE-LHX, single-mode, 50 km

DEM-315GT 1000BASE-ZX, single-mode, 80 km

DGS-712 1000BASE-T to SFP transceiver

Optional WDM SFP Transceivers

DEM-331T 1000BASE-LX, wavelength Tx: 1550 nm, Rx: 1310 nm, single-mode, 40 km

DEM-331R 1000BASE-LX, wavelength Tx: 1310 nm, Rx: 1550 nm, single-mode, 40 km

DEM-330T 1000BASE-LX, wavelength Tx 1550nm, Rx 1310nm, single-mode, 10km

DEM-330R 1000BASE-LX, wavelength Tx 1310nm, Rx 1550nm, single-mode, 10km

DEM-302S-BXD 1000BASE-LX, wavelength Tx:1550nm Rx:1310nm, Single-mode, 2 km

DEM-302S-BXU 1000BASE-LX, wavelength Tx:1310nm Rx:1550nm, Single-mode, 2 km

Optional SFP+ Transceivers

DEM-431XT 10GBASE-SR SFP+ Transceiver (without DDM), 33m: OM1 MMF, 82m: OM2 MMF, 300m: OM3 MMF

DEM-431XT-DD 10GBASE-SR SFP+ Transceiver (with DDM), 33m: OM1 MMF, 82m: OM2 MMF, 300m: OM3 MMF

DEM-432XT 10GBASE-LR SFP+ Transceiver (without DDM), 10km

DEM-432XT-DD 10GBASE-LR SFP+ Transceiver (with DDM), 10km

DEM-433XT 10GBASE-ER SFP+ Transceiver (without DDM), 40km

DEM-433XT-DD 10GBASE-ER SFP+ Transceiver (with DDM), 40km

DEM-434XT 10GBASE-ZR SFP+ Transceiver (without DDM), 80km

DEM-436XT-BXD 10GBASE-LR BiDi SFP+ Transceiver (without DDM), Wavelength Tx 1330nm, Rx: 1270nm, 20km

DEM-436XT-BXU 10GBASE-LR BiDi SFP+ Transceiver (without DDM), Wavelength Tx 1270nm, Rx: 1330nm, 20km

Optional SFP+ Direct Attach Stacking Cables

DEM-CB100S 10-GbE SFP+ 1 m Direct Attach Cable

DEM-CB300S 10-GbE SFP+ 3 m Direct Attach Cable

DEM-CB700S 10-GbE SFP+ 7m Direct Attach Cable

Specifications are subject to change without notice. D-Link is a registered trademark of D-Link
Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners.
©2015 D-Link Corporation. All rights reserved. E&OE.