CARRIER POINT OF INTERCONNECT

16 x RF Services
8 x Modular Card Slots
Attenuator or Splitter Cards
QMA or NEX10 Output Ports
 CARRIER POI
16 x RF Services
Modular Cards

Revision History
Revision Number Revision Date Summary of Changes Author
1.0.1 23rd Oct 2018 Draft Release Allen Chu
1.0.2 3rd Nov 2018 NEX10 Connectors. More Attenuation options Allen Chu
1.0.3 26th Apr 2019 Splitter Card. New format. Ben Patullo
1.0.4 6th May 2019 Card dimensions. Power connector types. Ben Patullo
1.0.5 4th June 2019 Modify the accuracy of ATT Card Allen Chu
1.0.6 11th Oct 2019 Update the DC power input Allen Chu

Copyright © 2019 Sunwave All rights reserved.

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into
any language, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without
prior written permission from Sunwave.
All copyright, confidential information, patents, design rights and all other intellectual property rights of whatsoever
nature contained herein are and shall remain the sole and exclusive property of Sunwave. The information furnished
herein is believed to be accurate and reliable.
However, no responsibility is assumed by Sunwave for its use, or for any infringements of patents or other rights of
third parties resulting from its use.
The Sunwave and CrossFire names and logos are trademarks or registered trademarks of Sunwave.
All other trademarks are the property of their respective owners.

Contact us today:
www.sunwave.com
[email protected] © Sunwave SP_CF_CPOI v1.0.6 | 2 of 5
 CARRIER POI
16 x RF Services
Modular Cards

Overview
The CrossFire CPOI is a modular rack mounted Point of Interconnect (POI), designed to provide RF attenuation and/or
splitting of RF signal from Radio Base Stations and other signal sources. The solution supports up to 8 cards to be fitted into
the POI sub-rack, with each card offering either attenuation of two RF services or 2 way splitting of six RF services. In a fully
utilized sub-rack it is possible to attenuate 16 inputs with attenuation options from 10dB to 40dB for 16 outputs, or 12
inputs with both attenuation and splitting for 24 outputs. The product is an ideal compliment for the CrossFire Access Unit,
where up to 16 low power RF inputs are available across 4 discrete band modules.

Key Features
5U 19” Sub-Rack Modular Architecture Up to 8 wideband low-PIM Attenuation Cards
Redundant fans for high-reliability and heat extraction 2 x RF services per Attenuation Card
AC or DC Powering options (to support fans & alarms) 6 x RF services per 2 Ways Splitter Card (12 outputs)
4.3-10 Inputs on Attenuation Cards to support high power QMA or NEX10 Outputs on Attenuation and Splitter Cards

System Elements

CPOI-AC-xxx
Attenuation Card
2 Inputs, 2 Outputs

CPOI-SC-62x
CPOI-S58x Splitter Card
Sub-Rack 6 Inputs, 12 Outputs

Contact us today:
www.sunwave.com
[email protected] © Sunwave SP_CF_CPOI v1.0.6 | 3 of 5
 CARRIER POI
16 x RF Services
Modular Cards

Technical Specifications
Electrical

Attenuation Card
Frequency 600 – 2700 MHz
CPOI-AC-10x CPOI-AC-20x CPOI-AC-30x CPOI-AC-35x CPOI-AC-40x
Attenuation Value
10 ± 1.2 dB 20 ± 1.2 dB 30 ± 1.5 dB 35 ± 1.5 dB 40 ± 1.5 dB
VSWR 1.3
3rd Order IMD -160dBc @ 2 x 43dBm
Impedance 50 Ohms
Maximum Input Power per Port 80 Watts

Splitter Card
Frequency 600 – 2700 MHz
Insertion Loss ≤3.5dB
VSWR 1.3
3rd Order IMD -110dBc @ 2 x 43dBm
Impedance 50 Ohms
Maximum Input Power per Port 2 Watts

Sub-Rack
AC Power 100-240V AC, 50/60Hz
DC Power 48VDC ± 20%
Maximum Power Consumption 15 Watts
Power Connector Type Circular Threaded Plug. AC: 3pins / DC: 2pins

Mechanical
CPOI-AC-xxQ CPOI-AC-xxT CPOI-SC-62Q CPOI-SC-62T
RF Connectors Input Ports 4.3-10 Female 4.3-10 Female QMA Female NEX10 Female
Output Ports QMA Female NEX10 Female QMA Female NEX10 Female
Physical Alarm (on Sub-Rack) DB9 Female (Fan Status)
Operating Temperature -10°C to +50°C / 14°F to 122°F
Storage Temperature -25°C to 70°C / -13°F to 158°F
Humidity 5% to 85% (Non-Condensing)
Cooling ² 3 x Fans
Mean Time Between Failure (MTBF) >100,000 hours
Installation (Sub-Rack) 19” Rack Mounted (Front or Back)
Installation (Cards) Slot with captive screws (inside CPOI sub-rack)
Ingress Protection Rating IP30 (Indoor)
² - System can remain operational with 2 fans in service. 3 fans are needed to achieve stated MTBF.

Dimensions
CPOI-S58x Sub-Rack (W x H x D) 440mm / 212mm / 366mm / 15.0kg | 17.32in / 8.35in / 14.41in / 33.07lb
CPOI-AC-x Attenuation Card (W x H x D) 48mm / 208mm / 283mm / 4.0kg | 1.89n / 8.19in / 11.14in / 8.82lb
CPOI-SC-62x Splitter Card (W x H x D) 48mm / 208mm / 130mm / 1.7kg | 1.89in / 8.19in / 5.12in / 3.75lb

Contact us today:
www.sunwave.com
[email protected] © Sunwave SP_CF_CPOI v1.0.6 | 4 of 5
 CARRIER POI
16 x RF Services
Modular Cards

Ordering Information
Part Code Part Description
Sub-Rack
CPOI-S581 Carrier POI Sub-Rack, 5U 19” Rack Mounted, 3 Fans, 8 x Card Slots, Type E/F AC Lead
CPOI-S582 Carrier POI Sub-Rack, 5U 19” Rack Mounted, 3 Fans, 8 x Card Slots, Type I AC Lead
CPOI-S583 Carrier POI Sub-Rack, 5U 19” Rack Mounted, 3 Fans, 8 x Card Slots, Type B AC Lead
CPOI-S584 Carrier POI Sub-Rack, 5U 19” Rack Mounted, 3 Fans, 8 x Card Slots, Type G AC Lead
CPOI-S58D Carrier POI Sub-Rack, 5U 19” Rack Mounted, 3 Fans, 8 x Card Slots, DC Power

Attenuation Cards
CPOI-AC-10Q Carrier POI, 10dB Attenuation Card, 2 x RF Services, 4.3-10 Inputs, QMA Outputs
CPOI-AC-20Q Carrier POI, 20dB Attenuation Card, 2 x RF Services, 4.3-10 Inputs, QMA Outputs
CPOI-AC-30Q Carrier POI, 30dB Attenuation Card, 2 x RF Services, 4.3-10 Inputs, QMA Outputs
CPOI-AC-35Q Carrier POI, 35dB Attenuation Card, 2 x RF Services, 4.3-10 Inputs, QMA Outputs
CPOI-AC-40Q Carrier POI, 35dB Attenuation Card, 2 x RF Services, 4.3-10 Inputs, QMA Outputs
CPOI-AC-10T Carrier POI, 10dB Attenuation Card, 2 x RF Services, 4.3-10 Inputs, NEX10 Outputs
CPOI-AC-20T Carrier POI, 20dB Attenuation Card, 2 x RF Services, 4.3-10 Inputs, NEX10 Outputs
CPOI-AC-30T Carrier POI, 30dB Attenuation Card, 2 x RF Services, 4.3-10 Inputs, NEX10 Outputs
CPOI-AC-35T Carrier POI, 35dB Attenuation Card, 2 x RF Services, 4.3-10 Inputs, NEX10 Outputs
CPOI-AC-40T Carrier POI, 35dB Attenuation Card, 2 x RF Services, 4.3-10 Inputs, NEX10 Outputs

Splitter Cards
CPOI-SC-62Q Carrier POI, 2 Way Splitter Card, 6 x RF Services, QMA Inputs, QMA Outputs
CPOI-SC-62T Carrier POI, 2 Way Splitter Card, 6 x RF Services, NEX10 Inputs, NEX10 Outputs

Contact us today:
www.sunwave.com
[email protected] © Sunwave SP_CF_CPOI v1.0.6 | 5 of 5