AP7343

300mA HIGH PSRR LOW NOISE LDO WITH ENABLE

Description Pin Assignments

The AP7343 is a low dropout regulator with high output voltage
(Top View) (Bottom View)
accuracy, low RDS(ON), high PSRR, low output noise, and low
quiescent current. This regulator is based on a CMOS process.

The AP7343 includes a voltage reference, error amplifier, current limit EP

circuit, and an enable input to turn it on and off. With the integrated
resistor network fixed output voltage versions can be delivered.

With its low power consumption and line and load transient response,
X2-DFN1010-4 (Type B)
the AP7343 is well suited for low-power handheld communication
equipment. PIN1 – VOUT, PIN2 – GND, PIN3 – EN, PIN4 – VIN

The AP7343 is packaged in the X2-DFN1010-4 (Type B) and SOT25

(Top View)
packages, allowing for the smallest footprint and a dense PCB layout.

VIN 1 5 VOUT

GND 2

EN 3 4 NC

SOT25

Features Applications
• Low VIN and Wide VIN Range: 1.7V to 5.25V • Smart Phone/Tablet
• Guarantee Output Current: 300mA • RF Supply
• VOUT Accuracy ±1% • Cameras
• Ripple Rejection 75dB at 1kHz • Portable Video
• Low Output Noise, 60µVrms from 10Hz to 100kHz • Portable Media Player
• Quiescent Current as Low as 35µA • Wireless Adapter
• VOUT Fixed 0.9V to 3.6V • Wireless Communication
• Moisture Sensitivity: Level 1 Per J-STD-020
• Terminals:
• SOT25: Finish - Matte Tin Plated Leads, Solderable per
MIL-STD-202, Method 208
• X2-DFN1010-4 (Type B): Finish - NiPdAu over Copper
Leads, Solderable per MIL-STD-202, Method 208
• Weight:
• SOT25: 0.016 grams (Approximate)
• X2-DFN1010-4 (Type B): 0.001 grams (Approximate)
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
• Halogen- and Antimony-Free. “Green” Device (Note 3)
• For automotive applications requiring specific change
control (i.e. parts qualified to AEC-Q100/101/200, PPAP
capable, and manufactured in IATF 16949 certified facilities),
please contact us or your local Diodes representative.
https://www.diodes.com/quality/product-definitions/

Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.

AP7343 1 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Typical Applications Circuit

VIN VOUT
VIN VOUT
COUT
AP7343
CIN 1μF
1μF EN GND

Pin Descriptions
Pin Number
X2-DFN1010-4 Pin Name Function
SOT25
(Type B)
1 5 VOUT Power Output Pin
2 2 GND Ground
Enable Pin
3 3 EN This pin should be driven either high or low and must not be floating. Driving this pin high enables
the regulator, while pulling it low puts the regulator into shutdown mode
4 1 VIN Power Input Pin
— 4 NC No connection
In PCB layout, prefer to use large copper area to cover this pad for better thermal dissipation, then
EP — Exposed Pad
connect this area to GND or leave it open. However, do not use it as GND electrode function alone

Functional Block Diagram

VIN VOUT VIN VOUT

VREF Thermal VREF Thermal

Current Limit Current Limit
Shutdown Shutdown

EN GND EN GND

AP7343D (With Discharge) AP7343 (Without Discharge)

AP7343 2 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Absolute Maximum Ratings (Note 4) (@ TA = +25°C, unless otherwise specified.)

Symbol Parameter Ratings Unit
ESD HBM Human Body Mode ESD Protection >2 kV
ESD MM Machine Mode ESD Protection > 200 V
VIN Input Voltage 6.0 V
VEN Input Voltage for EN Pin 6.0 V
VOUT Output Voltage -0.3 to VIN + 0.3 V
IOUT Output Current 400 mA
PD Power Dissipation 400 mW
TA Operating Ambient Temperature -40 to +85 °C
TJ Operating Junction Temperature +125 °C
TSTG Storage Temperature -55 to +125 °C
Notes: 4. Stresses beyond those listed under Absolute Maximum Ratings can cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these conditions is not implied. Exposure to absolute-maximum-rated conditions for extended period may affect
device reliability. Ratings apply to ambient temperature at +25°C. The JEDEC High-K board design used to derive this data was a 2 inch × 2 inch
multilayer board with 1oz. internal power and ground planes and 2oz. copper traces on the top and bottom of the board.

Recommended Operating Conditions (@ TA = +25°C, unless otherwise specified.)

Symbol Parameter Min Max Unit
VIN Input Voltage 1.7 5.25 V
IOUT Output Current 0 300 mA
TA Operating Ambient Temperature -40 +85 °C

AP7343 3 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Electrical Characteristics (@ TA = +25°C, VIN = VOUT +1.0V, CIN = COUT = 1.0µF, IOUT = 1.0mA, unless otherwise specified.)
Parameter Condition Min Typ Max Unit
Input Voltage TA = -40°C to +85°C 1.7 — 5.25 V
VOUT(T)* VOUT(T)*
VOUT(T) ≥ 2.0V, VIN = VOUT(T)+1V TA = +25°C VOUT(T)
0.99 1.01
Output Voltage Accuracy (Note 11) V
VOUT(T)- VOUT(T)+
VOUT(T) < 2.0V, VIN = VOUT(T)+1V TA = +25°C VOUT(T)
20mV 20mV
Line Regulation (dVOUT/dVIN/VOUT) VIN = (VOUT – Nom +1.0V) to 5.25V, IOUT = 1.0mA — 0.02 0.1 %/V
Load Regulation VIN = VOUT - Nom +1.0V, IOUT = 1mA to 300mA — 15 30 mV
Quiescent Current (Note 6) IOUT = 0mA — 35 60 µA
ISTANDBY VEN = 0V (Disabled) — 0.01 1.0 µA
Output Current — 300 — — mA
Fold-back Short Current (Note 7) VOUT Short to Ground — 55 — mA
VIN = (VOUT+1V) VDC + 0.2Vp-pAC,
PSRR (Note 8) f = 1kHz — 75 — dB
VOUT ≥ 1.8V, IOUT = 30mA
Output Noise Voltage
BW = 10Hz to 100kHz, IOUT = 30mA — 60 — µVrms
(Note 8) (Note 9)
VOUT = 0.9V — 0.51 0.80
1.0V < VOUT ≤ 1.2V — 0.46 0.70
1.2V < VOUT ≤ 1.4V — 0.39 0.58
IOUT = 300mA 1.4V < VOUT ≤ 1.7V — 0.35 0.44
V
(X2-DFN1010-4 (Type B)) 1.7V < VOUT ≤ 2.1V — 0.30 0.39
2.1V < VOUT ≤ 2.5V — 0.26 0.34
2.5V < VOUT ≤ 3.0V — 0.25 0.30
3.0V < VOUT ≤ 3.6V — 0.22 0.29
Dropout Voltage (Note 5)
VOUT = 0.9V — 0.51 0.82
1.0V < VOUT ≤ 1.2V — 0.46 0.72
1.2V < VOUT ≤ 1.4V — 0.39 0.60
1.4V < VOUT ≤ 1.7V — 0.35 0.46
IOUT = 300mA (SOT25) V
1.7V < VOUT ≤ 2.1V — 0.30 0.41
2.1V < VOUT ≤ 2.5V — 0.26 0.36
2.5V < VOUT ≤ 3.0V — 0.25 0.32
3.0V < VOUT ≤ 3.6V — 0.22 0.31
Output Voltage Temperature
IOUT = 30mA, TA = -40°C to +85°C — ±30 — ppm/°C
Coefficient
Thermal Shutdown Threshold
— — +150 — °C
(TSHDN)
Thermal Shutdown Hysteresis
— — +20 — °C
(THYS)
EN Input Low Voltage — 0 — 0.5 V
EN Input High Voltage — 1.3 — 5.25 V
EN Input Leakage VEN = 0, VIN = 5.0V or VEN = 5.0V, VIN = 0V -1.0 — +1.0 µA
On Resistance of N-Channel for
VIN = 4.0V, VEN = 0V (Disabled) — 30 — Ω
Auto-Discharge (Note 10)
Thermal Resistance Junction to X2-DFN1010-4 (Type B) — 237 —
Ambient (θJA) SOT25 — 179 —
°C/W
Thermal Resistance Junction to X2-DFN1010-4 (Type B) — 96 —
Case (θJC) SOT25 — 52 —
Notes: 5. Dropout voltage is the voltage difference between the input and the output at which the output voltage drops 2% below its nominal value.
6. Quiescent current is defined here as the difference in current between the input and the output.
7. Short circuit current is measured with VOUT pulled to GND.
8. This specification is guaranteed by design.
9. To make sure lowest environment noise minimizes the influence on noise measurement.
10. AP7343 has 2 options for output, built-in discharge and non-discharge.
11. Potential multiple grades based on following output voltage accuracy.

AP7343 4 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Typical Characteristics

Output Voltage vs Output Current Output Voltage vs Output Current

VOUT=1.8V VOUT=2.8V
2.0 3.5

3.0
Vin=2.8V
VIN=2.8V
Output Voltage V OUT (V)

Output Voltage V OUT (V)

1.5
Vin=4.2V
VIN=4.2V 2.5 Vin=3.8V
VIN=3.8V
VIN=5V
Vin=5V Vin=5V
VIN=5V
2.0
VIN=5.25V
Vin=5.25V
1.0 VIN=5.25V
Vin=5.25V
1.5

1.0
0.5

0.5

0.0 0.0
0 100 200 300 400 500 600 0 100 200 300 400 500 600
Output Current I OUT (mA) Output Current I OUT (mA)

Output Voltage vs. Input Voltage

Output Voltage vs Output Current VOUT=1.8V
VOUT=3.3V 2.0
3.5

3.0
Vin=4.3V
VIN=4.3V
1.5
Output Voltage V OUT (V)

VIN=5V
Vin=5V
Output Voltage V OUT (V)

2.5
VIN=5.25V
Vin=5.25V
2.0
1.0

1.5

1.0 0.5 1mA

30mA
0.5
50mA
0.0
0.0
0 100 200 300 400 500 600
0 1 2 3 4 5
Output Current I OUT (mA) Input Voltage V IN (V)

Output Voltage vs. Input Voltage Output Voltage vs. Input Voltage
VOUT=2.8V VOUT=3.3V
3.0 3.5

2.5 3.0

2.5
Output Voltage V OUT (V)

2.0
Output Voltage V OUT (V)

2.0
1.5
1.5
1.0
1.0
1mA 1mA
0.5 30mA 0.5 30mA
50mA 50mA
0.0 0.0
0 1 2 3 4 5 0 1 2 3 4 5
Input Voltage V IN (V) Input Voltage V IN (V)

AP7343 5 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Typical Characteristics (continued)

Supply Current vs. Input Voltage Supply Current vs. Input Voltage
VOUT=1.8V VOUT=2.8V
40 40

35 35

30 30

Supply Current I SS (μA)

25 25
Supply Current I SS (μA)

20 20

15 15

10 10

5 5

0 0
0 1 2 3 4 5 0 1 2 3 4 5
Input Voltage V IN (V) Input Voltage V IN (V)

Supply Current vs. Input Voltage Output

Output Voltage
Voltage vs. Temperature
Voltage vs Temperature
VOUT=3.3V VOUT=1.8V
40 1.84

35 1.83

30 1.82

25 1.81
Supply Current I SS (μA)

V OUT (V)

20 1.80

15 1.79

10 1.78

5 1.77

0 1.76
0 1 2 3 4 5 -50 -25 0 25 50 75 100

Input Voltage V IN (V) Temperature (℃)

Output
Output Voltage
Voltage vs. Temperature
Voltage vs Temperature Output
Output Voltage
Voltage vs. Temperature
Voltage vs Temperature
VOUT=2.8V VOUT=3.3V
2.840 3.340

2.830 3.330

2.820 3.320

2.810 3.310
V OUT (V)

V OUT (V)

2.800 3.300

2.790 3.290

2.780 3.280

2.770 3.270

2.760 3.260
-50 -25 0 25 50 75 100 -50 -25 0 25 50 75 100
Temperature (℃) Temperature (℃)

AP7343 6 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Typical Characteristics (continued)

Dropout Voltage vs. Output Current Dropout Voltage vs. Output Current
VOUT=1.8V VOUT=2.8V
400 300
350
250
Dropout Voltage V DIF (mV)

Dropout Voltage V DIF (mV)

300

250 200

200 150

150
25C
25°C 100 25°C
25C
100
-40C
-40°C -40°C
-40C
50
50
85C
85°C 85C
85°C
0 0
0 50 100 150 200 250 300 0 50 100 150 200 250 300
Output Current I OUT (mA) Output Current I OUT (mA)

Dropout Voltage vs. Output Current Ripple Rejection vs. Frequency

VOUT=3.3V VOUT=1.8V
300 120

250 100
Dropout Voltage V DIF (mV)

Ripple Rejection RR (dB)

200 80

150 60

100 25C
25°C 40
Iout=1mA
IOUT=1mA
-40C
-40°C IOUT=30mA
50 20 Iout=30mA
85C
85°C IOUT=150mA
Iout=150mA
0 0
0 50 100 150 200 250 300 100 1000 10000 100000 1000000
Output Current I OUT (mA) Frequency f (Hz)

Ripple Rejection vs. Frequency Ripple Rejection vs. Frequency

VOUT=2.8V VOUT=3.3V
120 120

100 100
Ripple Rejection RR (dB)

Ripple Rejection RR (dB)

80 80

60 60

40 IIout=1mA 40
OUT=1mA
IOUT=1mA
Iout=1mA
IIout=30mA
OUT=30mA
20 20 Iout=30mA
IOUT=30mA
IIout=150mA
OUT=150mA Iout=150mA
IOUT=150mA
0 0
100 1000 10000 100000 1000000 100 1000 10000 100000 1000000
Frequency f (Hz) Frequency f (Hz)

AP7343 7 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Typical Characteristics (continued)

Ripple Rejection vs. Input Voltage Ripple Rejection vs. Input Voltage
VOUT=2.8V IOUT=1mA VOUT=2.8V IOUT=30mA
90 90
80 80
Ripple Rejection RR (dB)

Ripple Rejection RR (dB)

70 70
60 60
50 50
40 40
30 0.1KHz 30 0.1KHz
1KHz 1KHz
20 20
10KHz 10KHz
10 10
100KHz 100KHz
0 0
2.8 3.3 3.8 4.3 4.8 5.3 2.8 3.3 3.8 4.3 4.8 5.3
Input Voltage V IN (V) Input Voltage V IN (V)

Line Transient Response Waveforms (IOUT = 30mA, tR = tF = 5μs, CIN = None, COUT1 = COUT2 = 1μF, TA = +25°C)

VOUT = 1.8V VOUT = 2.8V

Input Voltage V IN (V)

Input Voltage V IN (V)

5 5
4 4
Input Voltage
3 3
Input Voltage
Output Voltage V OUT (V)
Output Voltage V OUT (V)

1.81 2.81 Output Voltage

Output Voltage
1.80 2.80
1.79 2.79

0 20 40 60 80 100 0 20 40 60 80 100

Time t (µs) Time t (µs)

VOUT = 3.3V
Input Voltage V IN (V)

5
4
Input Voltage 3
Output Voltage V OUT (V)

Output Voltage
3.31
3.30
3.29

0 20 40 60 80 100

Time t (µs)

AP7343 8 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Typical Characteristics (continued)

Load Transient Response Waveforms (VIN = VOUT+1V, CIN = 1μF, TA = +25°C)

VOUT = 1.8V VOUT = 1.8V

COUT=1µF

Output Current I OUT (mA)

COUT=4.7µF

Output Current I OUT (mA)

150 150
100 100
Output Current 50 Output Current 50

Output Voltage V OUT (V)

1.82 50mA ↔ 100mA 0 1.82 50mA ↔ 100mA 0
Output Voltage V OUT (V)

1.81 1.81
1.80 1.80
1.79 1.79
1.78 Output Voltage 1.78 Output Voltage

0 80 160 240 320 400 0 80 160 240 320 400

Time t (µs) Time t (µs)

VOUT = 2.8V VOUT = 2.8V

COUT=1µF

Output Current I OUT (mA)

COUT=4.7µF
Output Current I OUT (mA)

150 150
100 100
Output Current 50 Output Current 50
Output Voltage V OUT (V)

2.82 50mA ↔ 100mA 0 2.82 50mA ↔ 100mA 0

Output Voltage V OUT (V)

2.81 2.81
2.80 2.80
2.79 2.79
2.78 Output Voltage 2.78 Output Voltage

0 80 160 240 320 400

0 80 160 240 320 400

Time t (µs) Time t (µs)

VOUT = 3.3V VOUT = 3.3V

COUT=1µF COUT=4.7µF
Output Current I OUT (mA)
Output Current IOUT (mA)

150 150
100 100
Output Current 50 Output Current 50
3.32 50mA ↔ 100mA 3.32 50mA ↔ 100mA
Output Voltage V OUT (V)

0 0
Output Voltage VOUT (V)

3.31 3.31
3.30 3.30
3.29 3.29
3.28 Output Voltage 3.28 Output Voltage

0 80 160 240 320 400 0 80 160 240 320 400

Time t (µs) Time t (µs)

AP7343 9 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Typical Characteristics (continued)

Load Transient Response Waveforms (VIN = VOUT+1V, CIN = 1μF, TA = +25°C)

VOUT = 1.8V VOUT = 1.8V

COUT=1µF

Output Current I OUT (mA)

Output Current I OUT (mA)
COUT=4.7µF

400 400
200 200
Output Current Output Current
1.90 0 1.90 0
1mA ↔ 300mA 1mA ↔ 300mA

Output Voltage V OUT (V)

Output Voltage V OUT (V)

1.85 1.85
1.80 1.80
1.75 1.75
1.70 Output Voltage 1.70 Output Voltage

0 80 160 240 320 400 0 80 160 240 320 400

Time t (µs) Time t (µs)

VOUT = 2.8V VOUT = 2.8V

COUT=1µF COUT=4.7µF

Output Current I OUT (mA)

Output Current I OUT (mA)

400 400
200 200
Output Current Output Current
Output Voltage V OUT (V)

Output Voltage V OUT (V)

2.90 0 2.90 0
1mA ↔ 300mA 1mA ↔ 300mA
2.85 2.85
2.80 2.80
2.75 2.75
2.70 Output Voltage 2.70 Output Voltage

0 80 160 240 320 400

0 80 160 240 320 400

Time t (µs) Time t (µs)

VOUT = 3.3V VOUT = 3.3V

Output Current I OUT (mA)

COUT=1µF COUT=4.7µF
Output Current I OUT (mA)

400 400
200 200
Output Current Output Current
Output Voltage V OUT (V)

Output Voltage V OUT (V)

3.40 0 3.40 0
1mA ↔ 300mA 1mA ↔ 300mA
3.35 3.35
3.30 3.30
3.25 3.25
3.20 3.20 Output Voltage
Output Voltage

0 80 160 240 320 400 0 80 160 240 320 400

Time t (µs) Time t (µs)

AP7343 10 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Typical Characteristics (continued)

Turn On & Off Waveforms (VIN = VOUT+1V, CIN = 1μF, COUT = 1μF, TA = +25°C)

VOUT = 1.8V VOUT = 2.8V

(V)(V)
EN (V)

V CEVEN
VoltageVVCE
CE
ENInput
Input Voltage
Voltage 4

Voltage
3

InputVoltage
CE
ENInput
Input Voltage
Voltage

Voltage
2 2
Output Voltage V OUT (V)

EN Input
1

Output Voltage V OUT (V)

Input
2 0 4 0

CE Input
CEEN
1 IOUT=0mA 2 IOUT=0mA
IOUT=30mA IOUT=30mA
Output Voltage IOUT=300mA Output Voltage IOUT=300mA
0 0

0 40 80 120 160 200 0 40 80 120 160 200

Time t (µs) Time t (µs)

VOUT = 3.3V
VOUT = 1.8V (Discharge)
VoltageVVEN (V)
(V)

(V)
(V)
CE Input Voltage V CE EN
CE

EN Input Voltage V
3
InputVoltage

CE Input
EN InputVoltage
Voltage EN
CE Input
InputVoltage
Voltage
2 2
Output Voltage V OUT (V)
Output Voltage V OUT (V)

1
Input

4 0 2 0
CEEN

2 IOUT=0mA 1 IOUT=0mA
IOUT=30mA IOUT=30mA
Output Voltage
Output Voltage IOUT=300mA IOUT=300mA
0 0

0 40 80 120 160 200 0 200 400 600 800 1000

Time t (µs) Time t (µs)

VOUT = 2.8V (Discharge) VOUT = 3.3V (non-Discharge) Input Voltage V CE (V)

EN Input Voltage VEN (V)
(V)
VoltageVVEN (V)
CE

CE
EN Input
Input Voltage
Voltage 4 CE
EN Input Voltage
Input Voltage 4
Voltage

2 2
Output Voltage V OUT (V)

Output Voltage V OUT (V)

Input
Input

4 0 4 0
CEEN

CE

IOUT=0mA IOUT=30mA
2 2
IOUT=30mA Output Voltage IOUT=300mA
Output Voltage
IOUT=300mA
0 0

0 200 400 600 800 1000 0 200 400 600 800 1000

Time t (µs) Time t (µs)

AP7343 11 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Application Information
Output Capacitor
An output capacitor (COUT) is needed to improve transient response and maintain stability. The AP7343 is stable with very small ceramic output
capacitors. The ESR (equivalent series resistance) and capacitance drive the selection. If the application has large load variations, it is
recommended to utilize low-ESR bulk capacitors. It is recommended to place ceramic capacitors as close as possible to the load and the ground
pin, and care should be taken to reduce the impedance in the layout.

Input Capacitor
To prevent the input voltage from dropping during load steps, it is recommended to utilize an input capacitor (CIN). A minimum 0.47μF ceramic
capacitor is recommended between VIN and GND pins to decouple input power supply glitch. This input capacitor must be located as close as
possible to the device to assure input stability and reduce noise. For PCB layout, a wide copper trace is required for both VIN and GND pins.

Enable Control
The AP7343 is turned on by setting the EN pin high, and is turned off by pulling it low. If this feature is not used, the EN pin should be tied to the
VIN pin to keep the regulator output on at all times. To ensure proper operation, the signal source used to drive the EN pin must be able to swing
above and below the specified turn-on/off voltage thresholds listed in the Electrical Characteristics section.

Short Circuit Protection

When VOUT pin is short-circuit to GND, short circuit protection will be triggered and clamp the output current to approximately 60mA. This feature
protects the regulator from overcurrent and damage due to overheating.

Layout Considerations
For good ground loop and stability, the input and output capacitors should be located close to the input, output, and ground pins of the device. The
regulator ground pin should be connected to the external circuit ground to reduce voltage drop caused by trace impedance. Ground plane is
generally used to reduce trace impedance. Wide trace should be used for large current paths from VIN to VOUT, and load circuit.

ESR vs. Output Current

A ceramic-type output capacitor is recommended for this series; however, other output capacitors with low ESR may be used. The relationship
between the IOUT (Output Current) and the ESR of an output capacitor are shown below. The stable region is marked as the hatched area in the
graph.

Measurement conditions: Frequency Band: 10Hz to 2MHz, Temperature: -40°C to +85°C.

AP7343 12 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Ordering Information (Note 12)

AP7343X - XXX XXX - XX

Output Discharge Output Voltage Package Packing

Blank : Non-discharge 09 : 0.9V FS4 : X2-DFN1010-4 7/7B : Tape & Reel

D : Output Discharge 10 : 1.0V (Type B)
105 : 1.05V W5: SOT25
11 : 1.1V
12 : 1.2V
13 : 1.3V
135 : 1.35V
14 : 1.4V
15 : 1.5V
16 : 1.6V
17 : 1.7V
18 : 1.8V
185 : 1.85V
19 : 1.9V
20 : 2.0V
21 : 2.1V
22 : 2.2V
23 : 2.3V
25 : 2.5V
26 : 2.6V
27 : 2.7V
28 : 2.8V
285 : 2.85V
29 : 2.9V
295 : 2.95V
30 : 3.0V
31 : 3.1V
32 : 3.2V
33 : 3.3V
34 : 3.4V
35 : 3.5V
36 : 3.6V

Package 7” Tape and Reel

Part Number Packaging
Code Quantity Part Number Suffix
AP7343-XXXFS4-7B FS4 X2-DFN1010-4 (Type B) 10,000/Tape & Reel -7B
AP7343D-XXXFS4-7B FS4 X2-DFN1010-4 (Type B) 10,000/Tape & Reel -7B
AP7343D-XXXFS4-7 FS4 X2-DFN1010-4 (Type B) 5,000/Tape & Reel -7
AP7343-XXXW5-7 W5 SOT25 3,000/Tape & Reel -7
AP7343D-XXXW5-7 W5 SOT25 3,000/Tape & Reel -7
Note: 12. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes-packaging/.

AP7343 13 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Marking Information
(1) X2-DFN1010-4 (Type B)
(Top View)
XX : Identification Code
XX Y : Year : 0~9
YWX W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Internal code
Part Number Package Identification Code
AP7343-09FS4-7B X2-DFN1010-4 (Type B) 7B
AP7343-10FS4-7B X2-DFN1010-4 (Type B) 7C
AP7343-105FS4-7B X2-DFN1010-4 (Type B) 7D
AP7343-11FS4-7B X2-DFN1010-4 (Type B) 7E
AP7343-12FS4-7B X2-DFN1010-4 (Type B) 7F
AP7343-135FS4-7B X2-DFN1010-4 (Type B) 7G
AP7343-15FS4-7B X2-DFN1010-4 (Type B) 7H
AP7343-18FS4-7B X2-DFN1010-4 (Type B) 7J
AP7343-185FS4-7B X2-DFN1010-4 (Type B) 7K
AP7343-22FS4-7B X2-DFN1010-4 (Type B) 7M
AP7343-25FS4-7B X2-DFN1010-4 (Type B) 7N
AP7343-28FS4-7B X2-DFN1010-4 (Type B) 7P
AP7343-285FS4-7B X2-DFN1010-4 (Type B) 7R
AP7343-295FS4-7B X2-DFN1010-4 (Type B) 7S
AP7343-30FS4-7B X2-DFN1010-4 (Type B) 7T
AP7343-31FS4-7B X2-DFN1010-4 (Type B) 7U
AP7343-32FS4-7B X2-DFN1010-4 (Type B) 7V
AP7343-33FS4-7B X2-DFN1010-4 (Type B) 7W
AP7343D-09FS4-7B X2-DFN1010-4 (Type B) 8B
AP7343D-10FS4-7B X2-DFN1010-4 (Type B) 8C
AP7343D-105FS4-7B X2-DFN1010-4 (Type B) 8D
AP7343D-11FS4-7B X2-DFN1010-4 (Type B) 8E
AP7343D-12FS4-7B X2-DFN1010-4 (Type B) 8F
AP7343D-13FS4-7B X2-DFN1010-4 (Type B) 8G
AP7343D-135FS4-7B X2-DFN1010-4 (Type B) 8H
AP7343D-14FS4-7B X2-DFN1010-4 (Type B) 8J
AP7343D-15FS4-7B X2-DFN1010-4 (Type B) 8K
AP7343D-16FS4-7B X2-DFN1010-4 (Type B) 8M
AP7343D-17FS4-7B X2-DFN1010-4 (Type B) 8N
AP7343D-18FS4-7B X2-DFN1010-4 (Type B) 8P
AP7343D-185FS4-7B X2-DFN1010-4 (Type B) 8R
AP7343D-19FS4-7B X2-DFN1010-4 (Type B) 8S
AP7343D-20FS4-7B X2-DFN1010-4 (Type B) 8T
AP7343D-21FS4-7B X2-DFN1010-4 (Type B) 8U
AP7343D-22FS4-7B X2-DFN1010-4 (Type B) 8V
AP7343D-23FS4-7B X2-DFN1010-4 (Type B) 8W
AP7343D-25FS4-7B X2-DFN1010-4 (Type B) 8X
AP7343D-26FS4-7B X2-DFN1010-4 (Type B) 8Y
AP7343D-27FS4-7B X2-DFN1010-4 (Type B) 8Z
AP7343D-28FS4-7B X2-DFN1010-4 (Type B) 6J
AP7343D-285FS4-7B X2-DFN1010-4 (Type B) 6K
AP7343D-29FS4-7B X2-DFN1010-4 (Type B) 6M
AP7343D-295FS4-7B X2-DFN1010-4 (Type B) 6N
AP7343D-30FS4-7B X2-DFN1010-4 (Type B) 6P
AP7343D-31FS4-7B X2-DFN1010-4 (Type B) 6R
AP7343D-32FS4-7B X2-DFN1010-4 (Type B) 6S
AP7343D-33FS4-7B X2-DFN1010-4 (Type B) 6T
AP7343D-34FS4-7B X2-DFN1010-4 (Type B) 6U
AP7343D-35FS4-7B X2-DFN1010-4 (Type B) 6V
AP7343D-36FS4-7B X2-DFN1010-4 (Type B) 6W
AP7343D-12FS4-7 X2-DFN1010-4 (Type B) 8F
AP7343D-18FS4-7 X2-DFN1010-4 (Type B) 8P
AP7343D-28FS4-7 X2-DFN1010-4 (Type B) 6J

AP7343 14 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Marking Information (continued)

(2) SOT25
(Top View)

5 4

7
XX : Identification Code
Y : Year 0 to 9
XX Y W X W : Week : A to Z : 1 to 26 week;
a to z : 27 to 52 week; z represents
52 and 53 week
1 2 3 X : Internal Code

Part Number Package Type Identification Code

AP7343-09W5-7 SOT25 7B
AP7343-10W5-7 SOT25 7C
AP7343-105W5-7 SOT25 7D
AP7343-11W5-7 SOT25 7E
AP7343-12W5-7 SOT25 7F
AP7343-135W5-7 SOT25 7G
AP7343-15W5-7 SOT25 7H
AP7343-18W5-7 SOT25 7J
AP7343-185W5-7 SOT25 7K
AP7343-22W5-7 SOT25 7M
AP7343-25W5-7 SOT25 7N
AP7343-28W5-7 SOT25 7P
AP7343-285W5-7 SOT25 7R
AP7343-295W5-7 SOT25 7S
AP7343-30W5-7 SOT25 7T
AP7343-31W5-7 SOT25 7U
AP7343-32W5-7 SOT25 7V
AP7343-33W5-7 SOT25 7W
AP7343D-09W5-7 SOT25 8B
AP7343D-10W5-7 SOT25 8C
AP7343D-105W5-7 SOT25 8D
AP7343D-11W5-7 SOT25 8E
AP7343D-12W5-7 SOT25 8F
AP7343D-13W5-7 SOT25 8G
AP7343D-135W5-7 SOT25 8H
AP7343D-14W5-7 SOT25 8J
AP7343D-15W5-7 SOT25 8K
AP7343D-16W5-7 SOT25 8M
AP7343D-17W5-7 SOT25 8N
AP7343D-18W5-7 SOT25 8P
AP7343D-185W5-7 SOT25 8R
AP7343D-19W5-7 SOT25 8S
AP7343D-20W5-7 SOT25 8T
AP7343D-21W5-7 SOT25 8U
AP7343D-22W5-7 SOT25 8V
AP7343D-23W5-7 SOT25 8W
AP7343D-25W5-7 SOT25 8X
AP7343D-26W5-7 SOT25 8Y
AP7343D-27W5-7 SOT25 8Z
AP7343D-28W5-7 SOT25 6J
AP7343D-285W5-7 SOT25 6K
AP7343D-29W5-7 SOT25 6M
AP7343D-295W5-7 SOT25 6N
AP7343D-30W5-7 SOT25 6P
AP7343D-31W5-7 SOT25 6R
AP7343D-32W5-7 SOT25 6S
AP7343D-33W5-7 SOT25 6T
AP7343D-34W5-7 SOT25 6U
AP7343D-35W5-7 SOT25 6V
AP7343D-36W5-7 SOT25 6W

AP7343 15 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Package Outline Dimensions

Please see http://www.diodes.com/package-outlines.html for the latest version.

(1) X2-DFN1010-4 (Type B)

A3 X2-DFN1010-4 (Type B)
A A1
Dim Min Max Typ
Seating Plane A - 0.40 0.39
A1 0.00 0.05 0.02
A3 - - 0.13
D b 0.20 0.30 0.25
e D 0.95 1.05 1.00
8 D2 0.43 0.53 0.48
E 0.95 1.05 1.00
0.1

Pin #1 ID
E2 0.43 0.53 0.48
4- C
k

R e - - 0.65
k 0.19 0.29 0.24
E L 0.20 0.30 0.25
L1 0.02 0.12 0.07
L1( 4x)
E2 D2 R 0.02 0.08 0.05
z - - 0.050
All Dimensions in mm
L( 4x)

z( 4x) b( 4x)

(2) SOT25

SOT25
A Dim Min Max Typ
A 0.35 0.50 0.38
B 1.50 1.70 1.60
C 2.70 3.00 2.80
B C
D - - 0.95
H 2.90 3.10 3.00
J 0.013 0.10 0.05
K 1.00 1.30 1.10
H L 0.35 0.55 0.40
M 0.10 0.20 0.15
K M N 0.70 0.80 0.75
N
α 0° 8° -
All Dimensions in mm
J
D L

AP7343 16 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Suggested Pad Layout

Please see http://www.diodes.com/package-outlines.html for the latest version.

(1) X2-DFN1010-4 (Type B)

X3
C

Value
Dimensions
(in mm)
C 0.650
X2
X 0.350
X1 0.112
Y2 X2 0.530
X1 X3 1.00
Y 0.350
Y1 Y1 0.530
Y Y2 1.100

(2) SOT25

C2 C2
Dimensions Value
Z 3.20
G 1.60
X 0.55
G C1 Y 0.80
Z
C1 2.40
C2 0.95
Y

AP7343 17 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

Tape Orientation (Note 13)

For AP7343-XXXFS4-7B & AP7343D-XXXFS4-7B

For AP7343D-XXXFS4-7

For AP7343-XXXW5-7 & AP7343D-XXXW5-7

Note: 13. The taping orientation of other package types can be found on our website at http://www.diodes.com/package-outlines.html.

AP7343 18 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated
 AP7343

IMPORTANT NOTICE

1. DIODES INCORPORATED AND ITS SUBSIDIARIES (“DIODES”) MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
WITH REGARDS TO ANY INFORMATION CONTAINED IN THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY
INTELLECTUAL PROPERTY RIGHTS (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

2. The Information contained herein is for informational purpose only and is provided only to illustrate the operation of Diodes products
described herein and application examples. Diodes does not assume any liability arising out of the application or use of this document or any
product described herein. This document is intended for skilled and technically trained engineering customers and users who design with Diodes
products. Diodes products may be used to facilitate safety-related applications; however, in all instances customers and users are responsible for
(a) selecting the appropriate Diodes products for their applications, (b) evaluating the suitability of the Diodes products for their intended
applications, (c) ensuring their applications, which incorporate Diodes products, comply the applicable legal and regulatory requirements as well
as safety and functional-safety related standards, and (d) ensuring they design with appropriate safeguards (including testing, validation, quality
control techniques, redundancy, malfunction prevention, and appropriate treatment for aging degradation) to minimize the risks associated with
their applications.

3. Diodes assumes no liability for any application-related information, support, assistance or feedback that may be provided by Diodes
from time to time. Any customer or user of this document or products described herein will assume all risks and liabilities associated with such use,
and will hold Diodes and all companies whose products are represented herein or on Diodes’ websites, harmless against all damages and
liabilities.

4. Products described herein may be covered by one or more United States, international or foreign patents and pending patent
applications. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks
and trademark applications. Diodes does not convey any license under any of its intellectual property rights or the rights of any third parties
(including third parties whose products and services may be described in this document or on Diodes’ website) under this document.

5. Diodes products are provided subject to Diodes’ Standard Terms and Conditions of Sale
(https://www.diodes.com/about/company/terms-and-conditions/terms-and-conditions-of-sales/) or other applicable terms. This document does not
alter or expand the applicable warranties provided by Diodes. Diodes does not warrant or accept any liability whatsoever in respect of any
products purchased through unauthorized sales channel.

6. Diodes products and technology may not be used for or incorporated into any products or systems whose manufacture, use or sale is
prohibited under any applicable laws and regulations. Should customers or users use Diodes products in contravention of any applicable laws or
regulations, or for any unintended or unauthorized application, customers and users will (a) be solely responsible for any damages, losses or
penalties arising in connection therewith or as a result thereof, and (b) indemnify and hold Diodes and its representatives and agents harmless
against any and all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim relating to any noncompliance with
the applicable laws and regulations, as well as any unintended or unauthorized application.

7. While efforts have been made to ensure the information contained in this document is accurate, complete and current, it may contain
technical inaccuracies, omissions and typographical errors. Diodes does not warrant that information contained in this document is error-free and
Diodes is under no obligation to update or otherwise correct this information. Notwithstanding the foregoing, Diodes reserves the right to make
modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described
herein. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document
is the final and determinative format released by Diodes.

8. Any unauthorized copying, modification, distribution, transmission, display or other use of this document (or any portion hereof) is
prohibited. Diodes assumes no responsibility for any losses incurred by the customers or users or any third parties arising from any such
unauthorized use.

Copyright © 2021 Diodes Incorporated

www.diodes.com

AP7343 19 of 19 August 2021

Document number: DS37952 Rev. 9 - 2 www.diodes.com © Diodes Incorporated