BANGLADESH TECHNICAL EDUCATION BOARD

SYLLABUS FOR NATIONAL SKILL STANDARD BASIC (360 Hours)

ON

COMPUTER HARDWARE AND NETWORKING

Total Duration: 360 hours

 Course Title: Certificate in Computer Hardware and Networking
Index:

Sl. no. Subject Page No.

01 Introduction 2
02 Objectives 2
03 Course out line 2
04 Competencies 3
05 Contents 4
06 English 4
07 Computer Hardware : (Common & Core Competencies) 6
08 Computer Network : (Common & Core Competencies) 8
09 Job List 11
10 Entry Qualification 13
11 Employment Opportunities 13
12 List of Tools 14
13 Book Reference 14

1
Course Name: Computer Hardware and Networking

Introduction:

Bangladesh is a country having an area of about 1,47,570 square kilometers. It is burdened with about 150
million people. So Bangladesh is a densely populated country. As such population problem is by far, a
burning question of Bangladesh.

Over-population adversely affects the economic development and progress of a country. It creates problems
of foods, communication, education, housing, health, sanitation, employment etc. But now-a-days over-
population is not our curse; also it is a main resource of our country. If we can provide training of our
unskilled people through technical (vocational) courses, we may convert them into skilled workers and solve
the unemployment problem and earn foreign currency also.

Bangladesh Technical Education Board is authorized by parliament of our country to introduce, control and
develop technical (vocational) curriculum.

At present professional computer training is essential for enriching our manpower from every corners of
Bangladesh. We need 5000 Hardware/Network professionals every year for fulfill the demands in our
IT sector in Bangladesh and skilled manpower for overseas.
In this regard BTEB has approved a short course on Computer Hardware and Networking. The syllabus is
prepared as per present need in the job markets.

Objectives:
1 To be able to understand Computer Fundamentals
2 To be able to understand the concept of hardware, software and Firmware
3 To be able to assemble and reassemble Desktop & Laptop
4 To be able to install and configure Windows/Linux Operating System
5 To be able to configure, setup and troubleshoot computer hardware and other peripherals
6 To be able to troubleshoot printer, scanner, CC Camera/ Access Point Installation and other
devices.
7 To be able to connect and configure mobile phone devices and TV card to computer
8 To be able to install UPS / IPS to supply regulated and uninterruptable power to computer
9 To be able to connect different types of cables with connectors and install NIC
10 To be able to establish a workgroup / Client server computer network system
11 To be able to configure DHCP / Mail / Web servers
12 To be able to configure DNS server and client
13 To be able to connect a Personal Computer to internet
14 To be able to send and receive e-mail
15 To be able to connect a LAN to internet Via Dial up and Broadband Line
16 To be able to understand visualization concept
17 To be able to understand virtual networking
18 To be able to establish wireless network
19 To be able to understand Remote Server Administration
20 To be able to understand Occupational health & Safety in IT Sector

Course Outline:

Name of Duration of Course Entry

Course Qualification
Total 360 hrs 6 days per week, Per day 3 hrs
Theory= 100 hrs (Computer Theory = 1 hr, per lesson
Hardware: 60, Computer network: Practice = 2 hrs. per practice
Computer
40) Total = 3 hrs, per working day Minimum
Hardware and
Practical= 200 hrs. (Computer Eight Pass.
Networking
Hardware: 120, Computer network:
80)
Communicative English= 60 hrs

2
LIST OF COMPETENCIES:
Basic Competencies

a) Receive and respond, Participate and Lead to workplace communication:

1. Work with others, Team Environment and Lead small Teams:
2. Demonstrate work values, Practice career professionalism and Develop & Practice
Negotiation skills.
3. Practice housekeeping procedures. Occupational health and safety procedure and
Solve problems related to work Activities.
4. Use Mathematical Concepts & Techniques and Use Relevant Technologies.
b) Personal Manner
Efficiently communicate in English
1. Speak in English with confidence.
2. Communicate with target persons effectively.
3. Understand the speech of English users.
4. Achieve better professional performance

Common Competencies
1. Understanding computer Fundamentals and concept of numbering system
2. Concept of Hardware, software and Firmware.
3. Concept on Memory
4. Assemble disassemble of computer Hardware.
5. Identification of different Units of a Micro-Computer..
6. Identification of different parts / peripherals devices of a Micro-Computer
7. Identification of RAM (SIMM, SD, RD, DIMM, DDR,) , ROM and their Capacities
8. Installation of Windows / Linux Operating System
10 Installation of Anti Virus and Drivers Software’s
11. Creation of emergency Boot Disk
12. Perform exercise on external / internal DOS commands
13. Identification of HDD, CD / DVD Drive, Pen Drive , Graphics Card, Power Unit, NIC
device, Processor, Modem, Sound card etc.
14 . Identification of different components of motherboard (processor socket, battery, RAM
slots, IDE, SATA connector, ISA, PCI, AGP slots , Chip set, ROM BIOS .and
connector
15. Identification of different elements of Computer network
16. Identification of different types of cable media(UTP / STP / Co-ax, Optical fiber)
17. Identification of different types of media Connectors
18 Connection of UTP cable to optical fiber, thinnet coaxial cable to NIC, fiber optic
cable to NIC, UTP cable to RJ45 connectors according to EIA / TIA rule
19. Installation of Ethernet NIC driver
20. Install Windows Server (latest version)
21. Install Linux operating system / RHEL / CentOS & Ubuntu
22. Creation of an e-mail account by using e-mail software
23. Browsing of different Web information
Core Competencies
1. Assemble and Dissemble of the system unit of a personal computer
2. Upgradatoin of System Board / system BIOS
3. Configuration of Operating System and Video Output device, USB devices, Serial
. Device, AGP Card, Sound/Game device, MODEM and LAN Card.
4. Troubleshooting of Motherboard and power supply, Video Output device, RAM, AGP, NIC
HDD, CRT / LCD / LED Monitor
5. Installation of External / Internal TV card / mobile device / External Storage device to a
computer
6. Installation of UPS / IPS to supply regulated and un-interruptible power to computer

3
 7. configuration of Workgroup Ethernet LAN with minimum five computers and share
files , folders, drives and printer
8. configuration of Server based Network with minimum five computers and share
files , folders ,drives and printer
9. Expanding an Ethernet LAN by using Hubs / Switch
10. Configuring Automatic and Manual TCP / IP Settings
11. Configuration of Dial up and Broadband Internet connection / Wireless configuration
12. Sending and receiving e-mail with file attachment by using e-mail software
13. Remote Desktop Services (VNC, Team Viewer, Any Desk etc.)
14. Managing Sub-netting and TCP / IP routing
15. Implementing secure network procedures
16. Mikrotik Router configuration (WAN, LAN), DNS, DHCP & Bandwidth Management.
Contents:
a) (i) Basic Competencies - 30 hours
Period Topics hours
1. Receive and Respond, Participate and Lead to workplace communication:
1 a) Explain & follow routinely speaking & messages in a workplace. 1
2 b) Follow routinely Speaking & message. 1
3 c) Perform work duties following written notices. 1

2. Work with others, Team Environment and Lead small Teams:

4 a) Develop effective workplace relationship. 1.5
5 b) Contribute to work group activities. 1.5
3. Demonstrate work values, Practice career professionalism and Develop & Practice Negotiation
skills
6 a) Define the purpose of works. 1
7 b) Apply work values/ethics. 1
8 c) Deal with ethical problems. 1
9 d) Maintain integrity of conduct in the workplace. 1
4. Practice housekeeping procedures, Occupational health and safety procedure and Solve
problems related to work Activities:
10 a) Sort and remove unnecessary items. 1
11 b) Arrange items. 1
12 c) Maintain work areas, Tools and Equipment’s. 1
13 d) Follow standardizes work process and procedures. 1
14 e) Perform work spontaneously. 1
15 a. Use Mathematical Concepts & Techniques and Use Relevant 3
Technologies:
6. Personal Manner:
16 a) Show good Manner. 2
17 b) Respect honorable person (Sir, Senior, Trainees). 2
18 c) Cooperate & Thinking to each and other about practical works. 2
19 d) Maintain sequence in practical works. 2
20 e) Own Responsibility & Duties of practical works. 2
21 f) Observation of all practical works. 2
a) (ii) Communicative English - 30 hours (Practical)
a) Interpret the meaning of given words (by the teachers) - Vocabulary.
b) Speaking on a specific Situation.
c) Public speaking.
d) Exchanging views with target persons.
e) Introducing one self.
f) Describing & narrating events, places, objects etc.

4
Communicative English - 30 hours
Related Subject-10 hours and General Subject- 20 hours 1 hour/period
On the completion of this course trainees will be able to:
1. Speak in English with confidence
2. Communicate with target persons effectively.
3. Understand the speech of English users.
4. Achieve better professional performance.
No. of Tropics- Conversational Situation hours
period
01 Speaking English – Getting Information & Finding one’s way 1
02 Speaking English – About Tools and Equipment’s 1
03 Speaking English – About meeting someone & participating in class. 1
04 Speaking English – Daily Activities & Asking About Activities 1
05 Speaking English – Evening Activities and about theoretical contents. 1
06 Speaking English – Meeting at the Train station & Asking Question at the Train 1
station.
07 Speaking English – Meeting at the Airport & Getting information at the Airport’s 1
08 Speaking English – About different type of Measuring Tools and Cutting Tools 1
09 Speaking English – Getting to the Hotel & Asking direction. 1
10 Speaking English – Asking about Buses & Traveling by bus. 1
11 Speaking English - About Practical Class. 1
12 Speaking English – Going by Taxi and Asking the time. 1
13 Speaking English – Arriving early or late and Time and the calendar. 1
14 Speaking English – Living in an Apartment. 1
15 Speaking English – Using the Telephone. 1
16 Speaking English – Getting help in stores and talking about shopping. 1
17 Speaking English – Sending and Receiving Letters. 1
18 Speaking English – Talking about the Weather & Trips and sightseeing. 1
19 Speaking English – Talking about Eating & Dinner Conversation. 1
20 Speaking English – About Machines and Materials. 1
21 Speaking English – Common Health problem and Quitting & Finding Jobs. 1
22 Speaking English – Office Details and Office Conversation. 1
23 Speaking English – About Practical Job. 1
24 Speaking English – On a specific situation & Public speaking. 1
25 Speaking English – About Exchanging view with a Persons & Introducing 1
oneself.
26 Speaking English – Describing and Narrating events, place, Objects etc. 1
27 Speaking English – About different type of computer, operating system, system 4
and operating software, add remove software, DBM, Email and internet.

Practical:
1. Speaking on a specific Situation.
2. Public Speaking.
3. Exchanging views with target persons.
4. Introducing one self.
5. Describing & Narrating events, places, objects etc.
6. Producing the meaning of given words (by the teachers)-Vocabulary.
7. Prepared speech.

5
1. Computer Hardware: Theoretical: Common & Core Competencies
Theoretical (Computer Fundamentals)
Sl. No. Topics Hour
01 Classify computers Generations depending on capability, size, speed etc. 1
02 Introduction of a Micro-Computer 1
03 List the different parts / peripherals devices of a Micro-Computer. 1
04 Describe Concept of Numbering system / Boolean Algebra/ Logic Gates 1
Practical (Computer Fundamentals)
02 Identify the different Units of a Micro-Computer. 2
03 Identify the different parts / peripheral devices of a Micro-Computer. 2

Theoretical (Concept of Hardware, software and Firmware)

05 Define Hardware, software and firmware / Simulator/ Emulator 1
06 Define and Classify input, output, storage device 2
07 Define and classify system software, application software 1
08 Sate the function of System and Application software 1
09 Understand BIOS / MBR / GPT / EFI / UEFI 1
Practical (Concept of Hardware, software and Firmware)
07-08 Identify input, output , storage devices and Special Devices 2
09 Configure and Update BIOS / MBR / GPT / UEFI / EFI 2

Theoretical (Concept of Memory)

10 List the types of memory, distinguish primary and secondary memories. 1
11 Distinguish between RAM (SIMM, SD, RD, DIMM, DDR) and ROM 1
12 Classify the secondary storage devices / SSD vs HDD 1
13 Define Memory Capacity, Bit, Byte, Kilobyte, Megabyte, Gigabyte, and 1
Terabyte
14 Describe Virtual, flash Memory and different types of memory card 1
Practical (Concept of Memory)
11-12 Identify RAM (SIMM, SD, RD, DDR) , ROM and their Capacities (Bus 2
Speed)

Theoretical (Operating System)

15 Describe Operating System; identify different types of Computer Operating 1
System.
16 Describe about file systems (FAT, FAT32,NTFS)/ ex Fat, file compression, 2
disk fragmentation, Data reduplication
17 Understand Windows Tools: graphical tools, taskbar, windows explorer, / 2
UAC, control panel, device manager, disk management tools, command line
tools
18 Understand of files, folders, sharing , permission etc./ GPO 1
19 Understand Local security, built in user group and accounts, user account 2
properties, workgroup, domain Local User vs Domain User
20 Importance of emergency Boot Disk , Describe MBR & GPT ,Partition System 1
Practical (Operating System)
15 Identify different types of Computer Operating System and their environment. 6
, Install Windows / Linux Operating System MBR vs GPT
16 Convert file system (FAT, FAT32,NTFS) Basic Disk vs Dynamic Disk, Partition 2
System (Drive Management)
17 Perform File Compression, Disk Fragmentation, Disk cleanup, System 4
recovery, System information and System restore.
18 Identify and explore Windows Tools: graphical tool, taskbar, windows explorer, 2
control panel, device manager, disk management tool, command line tool,
Install Application Software (Bijoy, Cleaner, Winrar, PDF etc)

6
 19 Install Anti Virus and Driver Software , Perform exercise on external / internal 6
DOS commands
20 Manage Local security, built in user group and accounts, user account
properties, workgroup, domain etc. … , Create an emergency Boot Disk / 6
Windows Backup & Restore using Acronis
Sl. No. Topics Hour
Theoretical (Assemble, De-assemble of computer hardware)
21 Understand HDD, RAM (DIMM), CD/DVD ROM Drive, Graphic Card, 2
Power Unit, NIC , Processor, MODEM, Sound card etc.
22 Understand different components of motherboard (processor socket, RAM 2
slots, IDE, SATA connectors, ISA, PCI, AGP slots / North & South Bridge
23 Understand different components of motherboard (Chip sets, ROM BIOS etc.) 1
24 Understand serial device, Parallel Device, PS2 device, Video output Device, 2
Wireless device
25 Understand different types of connector (serial, PS2, USB, IDE, parallel etc.) 2
26 Procedure of Upgrade/ setup System Board 1
27 Mention Assembling procedure of the system unit of a personal computer
1

28 Mention Upgrade procedure of the system BIOS 1

29 Procedure of upgrade of CPU 1
30 Installation procedure of Video Output device, USB device, Serial Devices, 3
AGP Card, Sound/Game device, Modem and LAN Card device and any other
device wireless LAN card
31 Introduction to various types of Application software and installation 1
32 Introduction to Visualization Software 1
33 Installation procedure necessary customized software 1
34 State preventive and corrective Maintenance 1
35 State the safety role in a computer lab 1
Practical (Assemble, De-assemble of computer hardware)
21 Identify HDD, CD / DVD Drive, Pen Drive , Graphic Card, Power Unit, NIC , 4
Processor, MODEM, Sound card etc.
22 Install HDD, RAM, CD/DVD Drive, Graphic Card, Power Unit etc. on 4
Motherboard
23 Install Processor, MODEM , NIC, Sound card etc. on Motherboard 4
24 Identify different components of motherboard (processor socket, battery, RAM 4
slots, IDE, SATA, PATA, ATA connectors, ISA, PCI, AGP slots)
25 Identify different components of motherboards (Chip sets, ROM BIOS etc.) 2
26 Identify different type’s connectors (serial, PS2, USB, IDE, parallel, ISCSI, 4
SCSI etc.)
27 CMOS Battery Testing 2
28 RAM/Faculty RAM Identify and Testing 2
29 How to clean Desktop/Laptop using Blower 2
30 Identify serial device, Parallel Device, PS2 device, Video output Device, 4
Wireless device
31 Upgrade/ setup System Board , Work with preventive and corrective 4
Maintenance
32 Assemble the system unit of a personal computer with P4 , AMD, Celeron 4
Processors
33 Upgrade the system BIOS , Diagnose and Trouble shoot the operating system 2
35 Configure and Upgrade Operating System , Diagnose and Trouble shoot the 4
operating system,
Work with preventive and corrective Maintenance

7
 35 Install and upgrade Video Output device, USB devices, Serial Devices, AGP 8
Card,
Configure and upgrade Sound/Game devices, MODEM and LAN Card device
and any other devices,
Install necessary customized software
Sl. No. Topics Hour
Theoretical (Troubleshoot Device Problem)
36 Procedure of troubleshooting Motherboard and power supply , Procedure of 2
troubleshooting input Device problem
37 Procedure of troubleshooting Video Output devices, RAM, AGP, NIC 2
38 Procedure of troubleshooting HDD and other storage devices , List mobile 2
device/External Storage device to connect to Computer through Bluetooth/
cable/ infrared
39 Describe Network Connection Problem (Common problems, troubleshooting 1
utilities)
Practical (Troubleshoot Device Problem)
36 Troubleshoot Motherboard and power supply 2
37 Troubleshoot Video Output device, RAM, AGP, NIC etc. 4
38 Troubleshoot HDD and other storage devices 2
39 Troubleshoot input Device problem 2
Theoretical (Install and troubleshooting printer and Scanner)
40 Mention the classification of printer /plotter and Scanner 1
41 Define local printer, remote printer, network printer 1
Practical (Install and troubleshooting printer/ Monitor/ Scanner/TV card)
40 Access remote printer, Configure network printer, share printer , Troubleshoot 2
CRT / LCD Monitor , Install External / Internal TV card to a computer
41 Install mobile device/External Storage devices to connect to Computer
2
through Bluetooth/ cable/ infrared
Theoretical (Install and troubleshooting UPS and IPS)
42 State difference between UPS and IPS, Online UPS and Power Optimization , 1
State different types of UPS /IPS and their rating, Mention the use of UPS and
IPS
Practical (Install and troubleshooting UPS and IPS)
42 Install UPS / IPS to supply regulated and un-interruptible power to computer 4
Total Theoretical 60
Total Practical 120

2. Computer Network: Theoretical: Common & Core Competencies

Sl. No. Topics Hour
Theoretical (Network Fundamentals /Basic Networking)
Define Computer network and it’s advantages and uses, mention the elements
1 of Computer network 1
Mention the types of cabling & Connector , Discuss Communication Media
(Wired & Wireless) used for Computer network, Understand the grading system
2 used for the various cable types 1
3 Draw the cross section of co axial cable, STP, UTP cable, Fiber optic cable. 1
4 Mention the types of media Connector 1
5 Mention the types of Wireless media used for Computer network 1
Mention the EIA / TIA rule for straight through and cross connection of UTP
6 cable to RJ45 connector, DB-9 1
Describe the Basic Networking topologies (Bus, Ring and Star, Mesh, Partial
Mesh ….etc.) used to build network.
Basic Comparison between Different Networking Topologies
7 Distinguish different type of network devices (Hub, Switch, Router, Repeater) 1

8
 Distinguish different types of networking( LAN, MAN, WAN,CAN, PAN) ,
OSI Layer and TCP/IP Model , Understand Full Duplex and Half duplex
8 communication 1
Practical (Network Fundamentals /Basic Networking)
1 Identify the elements of Computer network 2
Identify the types of cable media(UTP / STP / Co-ax, Optical fiber) and their
2 grading systems used for Computer network 2
3 Identify the media Connectors 2
4 Connect UTP cable to optical fiber through a media converter 2
5 Make a thinnet coaxial cable connection to NIC through BNC connector 2
Make a fiber optic cable connection to NIC through fiber optic cable
6 connector 2
Make straight through connection of UTP cable to RJ45 connector according to
7 EIA / TIA rule 2
Make cross connection of UTP cable to RJ45 connector according to EIA /
8 TIA rule 2
Theoretical (IP Addressing)
Describe MAC and IP Addressing , mention the classification of IP address
9 ,Classification of IPv4 , Introduction of Ipv6 1
Understand function of subnet mask, describe how to create subnets on a
10 network 1
11 Describe Sub netting of different classes , mention the advantages of sub netting 1
12 Describe Port & Protocols 1
13 IPV4 Classification and Introduction of IPV6 1
14 Cabling (Straight & Cross, Rollover) 1
15 Introduction to console, Aux, Port 1
Theoretical (Wireless)
Introduction to wireless communication
16 Wireless vs Wired communication 1
Wireless network standard

Sl. No. Topics Hour

Practical (IP Addressing and Network Standard)
Install Ethernet NIC driver, Assign the name of computer and IP Address ,
9 Check IP and MAC addresses of each computer 2
Connect two computers through a cross connected cable and share files , folders
10 and drives 2
Connect five computers by Hub through straight connected cable and check
11 connectivity. 2
Create and configure a Workgroup Ethernet LAN with minimum five
12 computers and share files , folders and drives 2
Install and configure network printer to share printing documents from
13 networked computers 2
State the meaning of 10Base-T , 10base 2 , 10Base 5 , 10Base FL , 100VG Any
LAN , 100Base X etc., Ethernet Standard
14 Mention types of cables used in Token ring LAN 2
Mention the IEEE standards for LAN , Understand Ethernet, Token ring and
FDDI Network
Mention the limitations of Token ring LAN
Mention the advantages and disadvantages of FDDI Network
15 Describe data communication process of Ethernet, Token ring Network Mention
the specification of Ethernet LAN , Create and configure Subnets on a Network
2

9
 Theoretical (Network Connectivity and Expansion)
17 State the role of NIC for data communication , mention the types of NIC 1
18 State the function of Repeater, mention it’s limitations 1
19 Describe different types of Hub and Switch 1
Understand the functions of a Hub/Switch, Process of adding Additional Hub / 1
20 Switch to the network
21 Distinguish the requirements of hub and switch for a particular network 1
Practical (Network Connectivity and Expansion)
16-18 Using 5-4-3 rule Expand an Ethernet LAN by using multiple Repeater 2
19-20 Using 5-4-3 rule Expand an Ethernet LAN by using multiple Hub / Switch 2
Theoretical (Network Software and Protocol)

22 Printer/File sharing from one PC to another

23 Describe Network Operating System, list Network operating System for server 1

24 Describe basic networking capabilities of Windows / Linux 1

Understand network protocol, describe how protocol enable networked
25 computer to communicate 1

26 Describes Port & protocol 1

Mention the application of FTP , TCP vs UDP, ARP, RARP, ICMP etc.
27 protocol TCP vs UDP, IMAP vs POP3 1

28 Understand the function of the primary TCP/IP utilities 1

Sl. No. Topics Hour

Practical (Network Software and Protocol)

21 Install Windows /Linux operating system (Client OS & Servers) 2+2

22 Configure Automatic and Manual TCP / IP Settings on Windows/Linux 2

23 Configure TCP / IP addressing on a server computer 2

24 Configure TCP / IP Client in a computer 2

Implement secure network procedures: Implement security baseline settings by
25 using security templates / the principle of least privilege 2
Install and configure software update infrastructure / software update services
26 / automatic client update settings 2

27 Install Windows /Linux operating system (Client OS & Servers) 2+2

Theoretical (Network Server and Client)
Describe client capabilities of major operating system, describe services ,
29 Introduction to MikroTik Router 1
Understand the function of DNS , DHCP , Web , Mail , Remote Access and
30 Proxy Server 1

31 Explain how DHCP assigns TCP/IP configuration setting to Work-stations 1

32 Understand the function of DNS and the windows Internet Name Services 1
Mention the significance of directory services provided with the windows
33 operating system 1

10
 34 Distinguish a server based network and Workgroup network , 1

Practical (Network Server and Client)

28 Install Mikrotik Router 2
29 Configure LAN & WAN connection 2
30 Configure DNS & DHCP Pool, provide IP to client 2
31 Manage BW for client 2
32 Configure FTP Server 2
Ping, TraceRT, IPcontig, nslookup and other basic command, Configure port
33
for Proxy server on Client Machine 4
Theoretical (Internetwork Connectivity and internet services)
Describe the process of data communication by MODEM by using existing
35 telephone line 1
Define internet, intranet , email and web services , Mention different Internet
36 Services and their application 1
37 Understand the function of a router, list the various types of router 1
State the significance of Remote Access service(RAS)
38 Mention the limitations of RAS 1

Sl. No. Topics Hour

Practical (Internetwork Connectivity and internet services)
Connect a personal computer to internet via MODEM and Telephone line and
34 configure a dial – up connection 2
Make a connection of a LAN to internet via optical fiber, media converter and
UTP / Coaxial cable and configure a broadband connection, Configure port for
35
proxy server on client machine, Create an e-mail account by using any e-mail /
Browser software 2
Send and receive e-mail with file attachment by using any e-mail / Browser
36
software 2
37 Practice on any web Browser and identify different command icons 2
Browse different Web information by applying web address / Search different
38
Websites by using search engine 2
Configure and Manage Remote Access Server(RAS) / Remote Access
39 Logging, Configure Routing and Remote access user authentication, Manage
TCP / IP routing 4
Wireless router administration with SSID creation, end user connect to
40 Wireless router, Internet Browsing etc.
2
Total (Theoretical) 40
Total (Practical) 80

Job List:
Computer Hardware
Sl. No. Name of Jobs
1 Identify the different Units of a Micro-Computer.
2 Identify the different parts / peripheral devices of a Micro-Computer.
3 Identify input, output , storage device and Special Device
4 Identify different types of Software versions and their environments
5 Identify RAM (SIMM, SD, RD, DDR) , ROM and their Capacities
6 Identify different types of Computer Operating Systems and their environments.
7 Install Windows / Linux Operating System
8 Convert file system (FAT, FAT32,NTFS)
9 Perform File Compression, Disk Fragmentation, Disk cleanup, System recovery, System
information and System restore.
10 Identify and explore Windows Tools: graphical tool, taskbar, windows explorer, control
panel, device manager, disk management tools, command line tool
11 Install Anti Virus and Driver Software

11
 17 Perform exercise on external / internal DOS commands.
12 Managing Local security, built in user group and account, user account properties,
workgroup, domain etc.
13 Create an emergency Boot Disk
14 Identify HDD, CD / DVD Drive, Pen Drive , Graphic Card, Power Unit, NIC , Processor,
MODEM, Sound card etc.
15 Install HDD, RAM, CD/DVD Drive, Graphic Card, Power Unit etc. on Motherboard
16 Install Processor, Modem, NIC , Sound card etc. on Motherboard
17 Identify different components of motherboard (processor socket, battery, RAM slots, IDE,
SATA connectors, ISA, PCI, AGP slots)
18 Identify different components of motherboard (Chip sets, ROM BIOS etc.)
19 Identify different types of connector (serial, PS2, USB, IDE, parallel, SCSI etc.)
20 Identify serial device, Parallel Device, PS2 device, Video output Device, Wireless device

21 Upgrade/ setup System Board

22 Assemble the system unit of a personal computer with P4 , AMD, Celeron Processor
23 Upgrade the system BIOS
24 Configure and Upgrade Operating System
25 Install and upgrade Video Output device, USB device, Serial Device, AGP Card
26 Configure and upgrade Sound / Game device, Modem and LAN Card etc.
27 Install necessary customized software
28 Diagnose and Trouble shoot the operating system
29 State preventive and corrective Maintenance
30 Troubleshoot Motherboard and power supply
31 Troubleshoot Video Output device, RAM, AGP, NIC etc.
32 Troubleshoot HDD and other storage devices
33 Troubleshoot input Device problem
34 Add a printer, Install the printer device driver / Scanner / Other devices
35 Access remote printer, Configure network printer, share printer
36 Troubleshoot CRT / LCD Monitors
37 Install External / Internal TV card to a computer
38 Install mobile device / External Storage device to Computer through Bluetooth/ cable/
infrared
39 Install UPS / IPS to supply regulated and un-interruptible power to computer

Computer Network
Sl. Name of Jobs
No.
1 Identify the elements of Computer network
Identify the types of cable media(UTP / STP / Co-ax, Optical fiber) and their grading
2 systems used for Computer network,
3 Identify the types of media Connector
4 Connect UTP cable to optical fiber through a media converter
5 Make a thinnet coaxial cable connection to NIC through BNC connector
6 Make a fiber optic cable connection to NIC through fiber optic cable connector
Make straight through connection of UTP cable to RJ45 connector according to EIA /
7 TIA rule
8 Make cross connection of UTP cable to RJ45 connector according to EIA / TIA rules
Install Ethernet NIC driver, Assign the name of computer and IP Address , Check IP
9 and MAC addresses of each computer
10 Connect two computer through a cross connected cable and share files , folders and drives
11 Connect five computers by Hub through straight connected cables, and check connectivity.
Create and configure a Workgroup Ethernet LAN with minimum five computers and
12 share files , folders and drives

12
 13 Install and configure network printer
14 Create and configure Subnets on a Network
15 Using 5-4-3 rule Expand an Ethernet LAN by using Multiple Repeaters
16 Using 5-4-3 rule Expand an Ethernet LAN by using Multiple Hubs / Switch
17 Install Windows 7, 10, Windows Server 2008, 2012 operating system
18 Install Windows Linux operating system
19 Configure Automatic and Manual TCP / IP Settings
20 Configure TCP / IP addressing on a server computer
21 Configure TCP / IP Clients in a computer
Implement secure network procedures: Implement security baseline settings by using
22 security templates / the principle of least privilege
Install and configure software update infrastructure / software update services /
23 automatic client update settings
24 Configure MikroTik Router ,Manage user accounts , Group Accounts
Install and Configure DNS server : Configure DNS server options / DNS zone options /
25 DNS forwarding / DNS clients and secondary DNS
26 Manage DNS : Manage DNS zone settings / DNS record settings / DNS server options

27 Configure and manage DHCP server: Manage DHCP client /

28 Manage DHCP scope options , reservations and reserved clients
29 Configure a mail server and send / receive e-mail through it
30 Configure a web server and host web page to it and browse web pages from it
Connect a personal computer to internet via MODEM and Telephone line and configure a dial
31 – up connection
Make a connection of a LAN to internet via optical fiber, media converter and UTP /
32 Coaxial cable and configure a broadband connection
33 Install and configure a Proxy server for connecting LAN to Internet
34 Create an e-mail account by using any e-mail / Browser software
35 Send and receive e-mail with file attachment by using any e-mail/ Browser software
36 Practice on any web Browser and identify different command icons
Browse different Web information by applying web address / Search different Websites
37 by using search engine
38 Configure and Manage Remote Access Server(RAS) / Remote Access Logging
39 Configure Routing and Remote access user authentication
40 Manage TCP / IP routing

Entry Qualification:
Minimum Class Eight Pass (Should have computer Knowledge).
Employment o p p o r t u n i t i e s :
1. Government Services,
2. Semi Government Services,
3. Corporation,
4. Private sectors,
5. NGO’s
6. Abroad,
7. Self-employment.

Training Facilities on each group of 30 students:

Physical facilities Size(in ft) Area (in Sq. ft)

Class Room cum Laboratory 15X 20 300
Office Room cum Library 15X20 300
Wash room 4X7 28

13
List of Tools (For number of trainees 30):
Tools Quantity
Personal Computer System and Accessories 10
Hard disk drive 5
Sound card 5
Mother board 5
CD drive 5
Pen drive 5
Memory card 5
DVD drive 5
Network Tool box 5 box
RAM 5
ROM 5
Power Supply Unit 5
Data Cable 5 sets
Monitor (CRT / LCD ) 5
Printer 5
Scanner Max 5
MS Office / Windows XP CD/ISO 05 set
Setup disk 5 set
AGP card 5
Microphone / Speaker 5 set
TV card 5
Multimedia Projector 2 pcs
UPS / IPS 5
Mobile set 5
Computer Network
Server PC 2
Printer 5
MODEM 2
LAN Card 10
RJ 45 / RJ11 / BNC / T / IBM Connector 1000
Coaxial cable 100 meter
Optical fiber cable 100 meter
Twisted pair cable 100 meter
Hub / Switch (16 port) 5
Repeater 4
DVD Read/Writer 5
Windows 7, 10, Windows server 2008, 2012 / Linux CD 06 set
Router 05
Internet Connection ***( Broadband/Dial up)
First Aid Kit 01 box

Book Reference:
1. A+ Certification- Core Hardware Second Edition, CompTIA A+ Certification
2. A+ Operating System Second Edition, CompTIA A+ Certification
3. CCNA: Cisco Certified Network Associates Study Guide
Forth Edition, Todd Lammle
5 . Windows Server 2012 MCSA / MCSE Study guide
6 . Network Essentials MCSE Study guide
7 . Data Communication & Networking Behrouz A. Forouzan
Forth Edition

14