WL Ds e 18 1 csm582-2308360

Two-circuit Limit Switch
WL CSM_WL_DS_E_18_1
Wide Range of Two-circuit

Switches; Select One for the
Operating Environment/Application
WL/Basic models
• A wide selection of models are available, including the
overtravel models with greater OT, indicator-equipped
models for checking operation, low-temperature
models,
heat-resistant models, and corrosion-proof models.
• Microload models are added to the product lineup.
• Approved standards: EC/IEC, UL, CSA, CCC (Chinese
Note: For details of The WL high-sensitivity, high-precision models,
standard). refer to Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1).
Contact your OMRON representative for information on For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
approved models.
Be sure to read Safety Precautions on page 39 to 42 and

Safety Precautions for All Limit Switches.
Features
Standard Models Features Common to All Models
Many Variations in Standard Limit Switches DPDB Operation
A Wide Range of Models The double-pole, double-break structure ensures circuit braking.
The WL Series provides a complete range of Limit Switches with a
1 4
long history of meeting user needs. Select environment-resistant
specifications, actuators for essentially any workpiece, operating Za 2 3
(NO)4 3(NO)
sensitivity matched to the workpiece, operation indicators to aid
operation and maintenance, and various wiring specifications.
(NC)1 2(NC) Load Load
Environment-resistant Models
Select from Six Types of Environment Resistance Degree of Protection; IP67
The series includes Airtight Switches, Hermetic Switches, Heat- O-rings, cover seals, and other measures provide a water-proof, drip-
resistant Switches, Low-temperature Switches, Corrosion-proof proof structure (IP67).
switches, and Weather-proof Switches. Select the one required by the
Approved Standards to Aid Export Machines
onsite environment.
Various WL/WLM switches are approved by UL, CSA, TÜV, EN/IEC,
Spatter-prevention Models and CCC making them ideal for export machines.
Excellent Performance on Arc Welding Lines or Sites with Operation Indicators for Easier Daily
Spattering Cutting Powder Inspections*
Ideal for Welding Sites Confirm operation with a neon lamp or LED for
Stainless steel and resins that resist adhesion of spatters are used to easier startup confirmations and maintenance.
prevent troubles caused by zinc powder generated during welding. * Operation indicators are provided on Indicator- Operation
equipped switches, Spatter-prevention Basic indicator
Switches, and Long-life Basic Switches.
Long-life Models
Models with Connectors to Reduce Wiring
Mechanical Endurance of 30 Million Operations
Reduce wiring with one-touch connection. Models with direct-wired
Long-life Models for High-frequency Applications and prewired connectors that make Switch replacement easier are
Long life has been achieved by increasing the resistance to friction also available.
and creating better sliding properties in the head mechanism. Greater
visibility is provided when setting with a fluorescent display for setting
the stroke.
1
WL
Product Configuration
Selection by Purpose
Selection Points
Effective for switching loads of 0.1 A, 125 VAC/30
VDC.
Standard
Selection Points
Effective if the
WLH@ overallmovement is
80q or 90qwhen dog
angle ordeflection is
WL@-2
WL@-2N absorbed.
Selection Points
WLCA32-@ Effective for protecting the operating status.
General-
purpose Operation indicators WL@-@LE
Selection Points
WL@-@LD
· Effective for confirming workpieces
passing by on a conveyor or for
confirming operation in dark locations.
· For standard models, add -LE or -LD.
(Operation indicators cannot be used
with some environment-resistant
Sensor I/O connectors WL@-@LDK@

Selection Points
WL@-@LD-M1@
Effective for reducing wiring work, WL@-@LD-AGJ@/-DGJ@
making maintenance easier, and WL@-@LD-DK1EJ@
preventing wiring mistakes.
WL@-55
WL@-139 WL@-145
WL Series WL@-140 WL@-RP40
Environment-resistant WL@-141 WL@-RP60
Selection Points WL@-TH

Enable selection according to the
operating environment: water, oil, WL@-TC
chemicals, high/low temperatures, etc.
WL@-RP
WL@-P1
WLCA2-@S
Spatter-prevention
WL01@-@S
Selection Points
Effective for welding sites or spattering WLH2-@S
cutting powder.
WLMCA2@
Long-life
Selection Points
WLMH2@
With high mechanical durability of 30
million operations, effective for
high-frequency operation.
2
WL
Tables of Models
General-purpose Switches Spatter-prevention Switches Long-life Switches
Heads (Roller levers only)
General Spatter
Features Head specifications Long-life
purpose prevention
Type
One-side Head
Model Total travel (TT) Model Model
operation mounting
• With a Roller Lever 45° 45°
Possible *1
(Except for Any of
Basic WLC@ WLCA2-@S WLMCA2@
long-life 4 directions
models.)
• Overtravel is large, making 80° 80°

General- setting the dog easier.
Not possible Any of
purpose WLH@ • Mounting is compatible with WLH2-@S WLH2@
*2 4 directions
Overtravel WLH2.
• Overtravel is large, making Not possible Any of

WL@-2 setting the dog easier. 90° 90°
Overtravel, *2 4 directions
• Mounting is compatible — —
90° operation Either of
WL@-2N with WLCA2-2. Possible *1
2 directions
• When the dog throws the le-
ver, the output is reversed
90°
and the reversed output is
Any of
Maintained WLCA32-@ held even after the dog — — —
4 directions
passed. The original status
is returned to only after the
dog passed.
*1. One-side operation means that three operational directions can be selected electrically, according to the change in direction of the operating plunger. The operating
plunger is set for operation on both sides before delivery.
*2. Those models for which one-side operation is impossible can only operate on both sides.
Connectors and Conduits

General-purpose Spatter-prevention Long-life
Wiring type Connector/conduit specifications
Model Model Model
Direct-wired connector WL@-@LDK@ • SC-2F/-4F Connector built-in — WLM@-LDK@
WL@-@LD-M1@
• XS2H-series Pre-wired Connector built- WL@-@S-M1@J-1 WLM@-LD-M1J
Pre-wired connector WL@-@LD-@GJ@
in WL@-@S-DGJS03 WLM@-LD-@GJ@
WL@-@LD-DK1EJ@
WL@-@ • G1/2 with no ground terminal WLM@-LD
WL@-@G1@ • G1/2 with ground terminal —
Conduit (screw terminal) WL@-@G@ • Pg13.5 with ground terminal — —
WL@-@Y@ • M20 with ground terminal —
WL@-@TS@ • 1/2 14NPT with ground terminal —
3
WL
Environment-resistant Switches
Item Environment-resistant
Type Model Application Environment-resistant construction Applicable models
All models except the low-
temperature and heat-re-
Airtight seal WL@-55 Uses the W-10FB3-55 Airtight Built-in Switch. sistant models
Note: Use the SC Connector for the conduit opening. Note: Models can be produced
using standard
actuators.
WL@-139 All models except the low-
For uses in locations sub- temperature and heat-re-
WL@-140 ject to cutting oil or water sistant models
Hermetic seal WL@-141 Refer to page 25 for information on the environ- Note: Models can be produced
(Molded terminals/ ment-resistant construction of Switches with Her- using standard
Anti-coolant) WL@-145 metic Seals. actuators. Only the
WLCA2, or WLH2 can
WL@-RP40 be produced for the
WL@-141 and WL@-
WL@-RP60 145.
Can be used at a tempera- All models except airtight
ture of –40°C (operating • Uses a general-purpose built-in switch. seal, hermetic seal, heat-
Low-temperature * WL@-TC temperature range: –40 to • Silicone rubber is used for rubber parts such as resistant, corrosion-proof,
40°C), but cannot with- the O-ring, gasket, etc. and indicator-equipped
stand icing. models
All models except airtight
seal, hermetic seal, heat-
Can be used in tempera- • Uses a special built-in switch made from heat-
resistant, corrosion-proof,
tures of 120°C (operating resistant resin.
Heat-resistant * WL@-TH and indicator-equipped, ny-
temperature range: 5 to • Silicone rubber is used for rubber parts such as
lon roller (WLCA2-26N),
120°C). the O-ring, gasket etc.
seal roller models, and res-
in rod (WLNJ-2) models
• Diecast parts, such as the switch box, are made
of corrosion-proof aluminum.
• Rubber sealing parts are made of fluorine rubber
All models except overtrav-
which aids in resisting oil, chemicals and
el (90° operation), fork le-
For use in locations sub- adverse weather conditions.
ver lock (WLCA32-41 to -
Corrosion-proof WL@-RP ject to corrosive gases and • Exposed nuts and screws (except the actuator
43), low-temperature, heat-
chemicals. section) are made of stainless steel.
resistant, and indicator-
• Moving and rotary parts such as rollers are
equipped models
made of sintered stainless steel or stainless
steel.
• The Head, box, and cover are yellow.
• Rubber parts are made from silicone rubber,
which has a high-tolerance to deterioration over Only basic (WLCA2/CA12/
time and changes in temperature. CL) and general-purpose
For use in parking lots and
Weather-proof * WL@-P1 • Rollers are made of stainless steel to improve overtravel (WLH2/H12/HL)
other outdoor locations.
corrosion resistance. models (excluding heat-re-
• Exposed nuts and screws are made of stainless sistant models).
steel.
* Weather Resistance, Cold Resistance, and Heat Resistance
Silicon rubber is used to increase resistance to weather, cold, and heat. Silicon rubber, however, can generate silicon gas. (This can occur at room temperature, but
the amount of silicon gas generated increases at higher temperatures.) Silicon gas will react as a result of arc energy and form silicon oxide (SiO2). If silicon oxide
accumulates on the contacts, contact interference can occur and can interfere with the device. Before using a Switch, test it under actual application conditions
(including the environment and operating frequency) to confirm that no problems will occur in actual.
4
WL
Selection Guide
With the WL Series, OMRON will combine the switch, Actuator, and wiring method required to build the ideal switch for
your application.
The WL Series consists of four basic types: General-purpose, En-

vironment-resistant, Spatter-prevention, and Long-life Switches.
WLCA2 Switches can be used for the most common applications.
According to Operating Environment

Environment Key specifications Models
−10°C +80°C WL@ General-purpose

Ambient operating temperature
Normal Switches
Water-resistant to IP67. WLM@ Long-life Switches
+5°C +120°C
WL@-TH Heat-resistant
High-temperature Switches *1
To increase heat resistance, the rubber material (silicon rubber)
and the material of the built-in switch have been changed.
−40°C +40°C
WL@-TC Low-temperature
Low-temperature
To increase resistance to cold, silicon rubber and other Switches *1
measures are used.
Rubber parts are made from silicone rubber, which has a

high-tolerance to deterioration over time and changes in temperature. WL@-P1 Weather-proof
Outdoors Switches *1
Rollers are made of stainless steel to improve corrosion resistance.
Exposed nuts and screws are made of stainless steel.
Corrosion-proof aluminum diecast has been used for the
housing, fluorine rubber has been used for rubber parts, and WL@-RP Corrosion-proof
Chemicals and oil
stainless steel has been used for screws and nuts (except for Switches *1
actuator) to increase resistance to oils, chemicals, and weather.
Water drops and mist Uses an airtight built-in switch. WL@-55 Airtight Switches *1
Cables attached. Uses a general-purpose built-in switch. WL@-139
The case cover and conduit opening are molded from epoxy Hermetic, Molded-terminal
resin to increase the seal. The cover cannot be removed. Switches *1, *2
Cables attached. Uses an airtight built-in switch.
The case cover and box interior are molded from epoxy resin to WL@-RP40
Constant water increase the seal. The cover cannot be removed. Hermetic, Molded-terminal
Operating environment
drops and mist The SC connector can be removed, so it is possible to use Switches *1, *2
flexible conduits for the cable.
WL@-140
The cover screws, case cover, box interior, and conduit opening
Hermetic, Molded-terminal
are molded from epoxy resin to increase the seal.
Switches *1, *2
(The cover cannot be removed.)
The cover screws, case cover, box interior, conduit opening, box
head, and head screws are molded from epoxy resin to increase WL@-141, -145
Constant water the seal. (The cover cannot be removed.) Hermetic, Molded-terminal
drops or splattering The Head opening is protected from cutting powder. Switches *1, *2
cutting powder -141: The Head section is molded from epoxy resin; (Only the WLCA2 and WLH2 can
Head direction cannot be changed. be produced.)
-145: The Head section is molded from epoxy resin;
Head can be in any of 4 directions.
The case cover, box interior, conduit opening, and head screws WL@-RP60
Coolant are molded from epoxy resin to increase the seal. (The cover Hermetic, Molded-terminal
cannot be removed.) Rubber parts are made from fluorine rubber Switches *1, *2
to increase resistance to coolant.
Spattering from To prevent spatter during welding, a heat-resistant resin is used

WL@-S Spatter-prevention
welding for the indicator cover and screws and rollers are all made from
Switches
stainless steel.
*1. Not all functions can be combined with environment-resistant switches. Refer to the applicable models on the previous page.
*2. Refer to page 25 for information on the construction of Hermetic Switches.
5
WL
According to Application Conditions

Conditions Key specifications Models
10 A at 125,250, or 500 VAC WL@ General-purpose Switches

Switching standard
0.8 A at 125 VDC WL@-S Spatter-prevention Switches
loads
0.4 A at 250 VDC WLM@ Long-life Switches
Load
Switching 0.1 A at 125 VAC, resistive load WL01@ General-purpose Microload Switches
microloads 0.1 A at 30 VDC, resistive load WL01@-S Spatter-prevention Microload Switches
Mechanical: 15 million operation min.

Normal durability (10 million operation min. for overtravel WL@ General-purpose Switches
general-purpose models or flexible rod WL@-S Spatter-prevention Switches
Durability
models)
Long-life Mechanical: 30 million operation min. WLM@ Long-life Switches
According to Ease of Installation and Maintenance

Conditions Key specifications Models
Switching light-ON between operating/not
WL@-LE
operating. (Switching not possible for models
General-purpose, Indicator-equipped (Neon Lamp) Switches
Operation indicator
with molded terminals.)

WL@-LES
Neon lamp
Daily inspections Spatter-prevention, Indicator-equipped (Neon Lamp) Switches
125 to 250 VAC
and maintenance
checks Switching light-ON between operating/not
WL@-LD
operating. (Switching not possible for models
General-purpose, Indicator-equipped (LED) Switches
with molded terminals.)
WL@-LDS
LED
Spatter-prevention, Indicator-equipped (LED) Switches
10 to 115 VAC/DC
Screw terminals. No ground terminal. WL@ General-purpose Switches

Screw tightening Conduit size: G1/2 WLM@ Long-life Switches
and installation Screw terminals. Ground terminal.
Conduit size: 4 sizes WL@ General-purpose Switches
Direct-wired connector, 2-conductor. WL@-@LDK13

Greatly reduces wiring work. General-purpose, Direct-wired Connector Switches
Water-proof to IP67. WLM@-LDK13
One-touch Long-life, Direct-wired Connector Switches
connector
Wiring specification
attachment WL@-@LDK43
Direct-wired connector, 4-conductor.
General-purpose, Direct-wired Connector Switches
Greatly reduces wiring work.
WLM@-LDK43
Water-proof to IP67.
Long-life, Direct-wired Connector Switches
WL@-@LD-M1J
General-purpose, Pre-wired Connector Switches
Pre-wired connector, 2-conductor.
WL@-@S-M1J-1
Greatly reduces wiring work.
Spatter-prevention, Pre-wired Connector Switches
Water-proof to IP67.
WLM@-LD-M1J
Connector
Long-life, Pre-wired Connector Switches
attachment in
control and relay
WL@-@LD-@GJO3
boxes
General-purpose, Pre-wired Connector Switches
Pre-wired connector, 4-conductor. WL@-@S-@GJSO3
Greatly reduces wiring work. Spatter-prevention, Pre-wired Connector Switches
Water-proof to IP67. WLM@-LD-@GJO3
Long-life, Pre-wired Connector Switches
6
WL
According to Form of Operation

Detection object Key specifications Models
TT (total travel) PT (pretravel)
45° 45° 15°
WLCA2 General-purpose Switches
General
WLCA2-@S Spatter-prevention Switches
Operation angles
WLMCA2 Long-life Switches

15°
80° 80° WLH2 General-purpose Switches
Passing dogs WLH2-@S Spatter-prevention Switches
WLMH2 Long-life Switches
WLCA2-2 25° WLCA2-2N 20°
90° 90°
Passing dogs WLCA2-2 General-purpose Switches
WLCA2-2N General-purpose Switches
R38
● Short lever
● One-Horizontal operation possible. WL@2 Roller Lever Actuators
(WLCA@ only) WL@2-@S Roller Lever Actuators
● Head mounts in any of 4 directions.
WLM@2 Roller Lever Actuators
Dogs and R50 ● Medium lever
workpieces ● One-Horizontal operation possible.

(WLCA@ only) WL@2-7 Roller Lever Actuators
(Mounts in any of
4 directions) ● Head mounts in any of 4 directions.
R63 ● Long lever
● One-Horizontal operation possible.
WL@2-8 Roller Lever Actuators
(WLCA@ only)
R25 to 89
Adjustable between
(WLCA@ only) WL@12 Adjustable Roller Lever Actuators
dog and lever
25 to 140
(WLCL only) WL@L Adjustable Rod Lever Actuators
Dogs or workpieces 350 to 380

● One-Horizontal operation not
with large possible. WLHAL4 Adjustable Rod Lever Actuator
deflection ● Head mounts in any of 4 directions.
427.5 ● One-Horizontal operation not

possible. WLHAL5 Rod Spring Lever Actuator
Actuators
● Head mounts in any of 4 directions. WLCA32-41 Fork Lever Lock Actuator

Round-trip
operation of
passing dogs
WLD Top Plunger Actuator
● Head mounts in any of 4 directions. WLSD Horizontal Plunger Actuator
Cams or WLD3 Top-ball Plunger Actuator

workpieces with
vertical movement ● Head mounts in any of 4 directions. WLSD3 Horizontal-ball Plunger Actuator
● Available in sealed models. WLD2 Top-roller Plunger Actuator
(WLD28@) WLD28 Sealed Top-roller Plunger Actuator
WLSD2 Horizontal-roller Plunger Actuator
7
WL
Application Examples
Positioning on Production Lines Positioning of Machine Tools
Positioning on Suspended Conveyors Pallet Detection in Arc Welding Lines
Multilevel Car Parking Towers Limit Detection is Transport Systems
8
WL
Model Number Structure
Model Number Legend (Not all combinations are possible. Ask your OMRON representative for details.)
General-purpose and Environment-resistant Switches
WL @ @-@ @ @ @ @ @ @ @
(1) (2) (3) (4) (5) (6) (7) (8) (9)(10)
(1) Electrical Rating (2) Actuator and Head Specifications

Blank Standard load Symbol Actuator type Switch without lever
01 Microload CA2 Roller lever: Standard model R38 WLRCA2
Note: Dimensions are the same as the standard CA2-7 Roller lever: Standard model R50 WLRCA2
models.
CA2-8 Roller lever: Standard model R63 WLRCA2
(3) Environment-resistant Model
H2 Roller lever: General-purpose overtravel model, 80° WLRH2
Specifications
CA2-2 Roller lever: Overtravel, 90° WLRCA2-2
Blank Standard
CA2-2N Roller lever: Overtravel, 90° WLRCA2-2N
RP Corrosion-proof *1
CA12 Adjustable roller lever: Standard WLRCA2
P1 Weather-proof *1
H12 Adjustable roller lever: General-purpose overtravel model, 80° WLRH2
Note: Dimensions are the same as the standard
models. CA12-2 Adjustable roller lever: Overtravel, 90° WLRCA2-2
*1. Refer to page 4 for applicable models. CA12-2N Adjustable roller lever: Overtravel, 90° WLRCA2-2N
(4) Built-in Switch Type CL Adjustable rod lever: Standard, 25 to 140 mm WLRCL
Blank Standard HL Adjustable rod lever: General-purpose overtravel model, 80°, 25 to 140 mm WLRH2
55 Hermetically sealed *1 HAL4 Adjustable rod lever: General-purpose overtravel model, 80°, 350 to 380 mm WLRH2
Note: Dimensions are the same as the standard CL-2 Adjustable rod lever: Overtravel, 90°, 25 to 140 mm WLRCA2-2
models.
*1. Refer to page 4 for applicable models. CL-2N Adjustable rod lever: Overtravel, 90°, 25 to 140 mm WLRCA2-2N
(5) Temperature Specifications HAL5 Rod spring lever: General-purpose overtravel model, 80° WLRH2
CA32-41 Fork lever lock: Maintained, WL-5A100 WLRCA32
Blank Standard: –10°C to +80°C
CA32-42 Fork lever lock: Maintained, WL-5A102 WLRCA32
TH Heat-resistant: +5°C to +120°C *1
TC Low-temperature: –40°C to +40°C *1 CA32-43 Fork lever lock: Maintained, WL-5A104 WLRCA32
Note: Dimensions are the same as the standard D Plunger: Top plunger —
models. D2 Plunger: Top-roller plunger —
*1. Refer to page 4 for applicable models.
D28 Plunger: Sealed top-roller plunger —
(7) Conduit Size, Ground Terminal
D3 Plunger: Top-ball plunger —
Specifications *2
SD Plunger: Horizontal plunger —
Blank G1/2 without ground terminal
SD2 Plunger: Horizontal-roller plunger —
G1 G1/2 with ground terminal
SD3 Plunger: Horizontal-ball plunger —
G Pg13.5 with ground terminal
NJ Flexible rod: Coil spring —
Y M20 with ground terminal
NJ-30 Flexible rod: Coil spring, multi-wire —
TS 1/2-14NPT with ground terminal
NJ-2 Flexible rod: Coil spring, resin rod —
Note: Dimensions are the same as the standard
models. NJ-S2 Flexible rod: Steel wire —
*2. Models with ground terminals are approved by
EN/IEC (CE marking).
(6) Hermetic Model Specifications (8) Indicator Type
Blank No cables or molding Symbol Element Voltage Leakage current
General-purpose built-in switch with cables attached and mold- Blank No indicator
139
ed conduit opening and cover (cover cannot be removed). * LE Neon lamp 125 to 250 VAC Approx. 0.6 to 1.9 mA
Airtight built-in switch with cables attached and molded conduit open- 115 VAC/VDC Approx. 0.5 mA
140 LD LED
ing, cover, and box interior cover screws (cover cannot be removed). *
10 to 24 VAC/VDC Approx. 0.4 mA
Airtight built-in switch with cables attached and molded con-
duit opening, cover, head, box interior, cover screws, and Note: Dimensions are the same for both LE and LD models.
141 head screws (cover cannot be removed, Head direction can-
not be changed). The Head opening is created to protect it (9) Indicator Wiring
from cutting powder. * 2 NC connection: Light-ON when operating
Airtight built-in switch with cables attached and molded conduit 3 NO connection: Light-ON when not operating
opening, cover, box interior, and cover screws (cover cannot be
145 Note: Include the indicator wiring specification only when a (6) hermetic seal
removed, Head can be mounted in any of 4 directions). The
Head opening is created to protect it from cutting powder. * and (8) operation indicator have been selected.
Airtight built-in switch with cables attached and molded cover and
(10) Lever Type
box interior (cover cannot be removed, Head direction can be
RP40
changed). SC Connector can be removed, so it is possible to use Blank Standard lever
flexible conduits for the cable. * A Double nut lever
Airtight built-in switch with cables attached, fluorine rubber used,
RP60 and molded conduit opening, cover, and box interior (cover cannot
be removed, Head direction cannot be changed). *
* Refer to page 4 for applicable models.
9
WL
General-purpose Switches Direct-wired Connector Pre-wired Connector
Sensor I/O Connector Switches
WL @ @-@ LD @
(1) (2) (3) (4) (5)
(1) Electrical Rating

Blank Standard load (4) Indicator Type
01 Microload LD LED, 10 to 115 VAC/DC
Note: Dimensions are the same as the standard models.
(2) Actuator Type (5) Wiring Specifications

CA2 Roller lever: Standard model K13A Direct-wired Connector (2-conductor: AC, NO wiring, connector pins No. 3, 4)
Roller lever: General-purpose K13 Direct-wired Connector (2-conductor: DC, NO wiring, connector pins No. 3, 4)
H2
overtravel model K43A Direct-wired Connector (4-conductor: AC)
D2 Top-roller plunger K43 Direct-wired Connector (4-conductor: DC)
D28 Sealed top-roller plunger -M1J * Pre-wired Connector *2 (2-conductor: DC, NO wiring, connector pins No. 3, 4)
-M1GJ *1 Pre-wired Connector *2 (2-conductor: DC, NO wiring, connector pins No. 1, 4)
(3) Built-in Switch Type
-M1JB Pre-wired Connector *2 (2-conductor: DC, NC wiring, connector pins No. 3, 2)
Blank Standard -AGJ03 Pre-wired Connector *2 (4-conductor, AC)
55 Hermetically sealed -DGJ03 *1 Pre-wired Connector *2 (4-conductor, DC)
Note: Dimensions are the same as the standard models. -DK1EJ03 *1 Pre-wired Connector *2 (3-conductor: DC, NO wiring, connector pins No. 2, 3, 4)
*1. Models with pre-wired connectors and DC specifications have EN/IEC approval (CE marking).
*2. With 0.3-m cable attached.
Spatter-prevention Switches Long-life Switches
WL @ @-@ @ S @ WLM @ -LD @

(1) (2) (3) (4) (5) (1) (2) (3)
(1) Electrical Rating (1) Actuator

Blank Standard load CA2 Roller lever: Standard model
01 Microload H2 Roller lever: General-purpose overtravel model
(2) Indicator Type
(2) Actuator Type
LD LED, 10 to 115 VAC/DC
CA2 Roller lever: Standard model
H2 Roller lever: General-purpose Overtravel model (3) Wiring Specifications
D28 Sealed top-roller plunger
Blank Screw terminal: G1/2 conduit
(3) Built-in Switch Type K13A Direct-wired Connector: 2-conductor, AC
K13 Direct-wired Connector: 2-conductor, DC
Blank Standard
K43A Direct-wired Connector: 4-conductor, AC
55 Hermetically sealed
K43 Direct-wired Connector: 4-conductor, DC
-M1J Pre-wired Connector: 2-conductor, DC *
(4) Indicator Type -AGJ03 Pre-wired Connector: 4-conductor, AC *
LD LED, AC/DC -DGJ03 Pre-wired Connector: 4-conductor, DC *
LE Neon lamp * With 0.3-m cable attached.
Note: Dimensions are the same for both LE and LD models.
(5) Wiring Specifications

Blank Screw terminal: G1/2 conduit
Pre-wired Connector *2
-M1J-1 *1
(2-conductor: DC, NO wiring, connector pins No. 3, 4)
Pre-wired Connector *2
-M1GJ-1 *1
(2-conductor: DC, NO wiring, connector pins No. 1, 4)
-DGJS03 *1 Pre-wired Connector *2 (4-conductor: DC)
*1. Models with pre-wired connectors and DC specifications are approved by
EN/IEC (CE marking) except for LE Models (Neon Lamp Models).
10
WL
Ordering Information
General-purpose Switches
Note: Models are also available with ground terminals.
Standard Switches
Lever
Actuator
Roller lever R38 Roller lever R50 Roller lever R63
Item Model Model Model

Standard load WLCA2 WLCA2-7 WLCA2-8
Basic
Microload WL01CA2 WL01CA2-7 WL01CA2-8
General- Standard load WLH2 — —
purpose Microload WL01H2 — —
Standard load WLCA2-2 — —
Overtravel
90° Microload WL01CA2-2 — —
operation Standard load WLCA2-2N — —
Microload WL01CA2-2N — —
Note: For details of The WL high-sensitivity, high-precision models, refer to Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1).
Actuator Adjustable roller Adjustable rod lever Adjustable rod lever

Rod spring lever
lever 25 to 140mm 350 to 380mm
Item Model Model Model Model
Standard load WLCA12 WLCL — —
Basic
Microload WL01CA12 WL01CL — —
General- Standard load WLH12 WLHL WLHAL4 WLHAL5
purpose Microload WL01H12 WL01HL — —
Standard load WLCA12-2 WLCL-2 — —
Overtravel
90° Microload WL01CA12-2 — — —
operation Standard load WLCA12-2N WLCL-2N — —
Microload WL01CA12-2N WL01CL-2N — —
Actuator Fork lever lock (with Fork lever lock (with Fork lever lock (with Fork lever lock (with
WL-5A100 plastic WL-5A102 plastic WL-5A104 plastic WL-5A104 plastic
roller lever) roller lever) roller lever) roller lever)
Standard load WLCA32-41 WLCA32-42 WLCA32-43 WLCA32-44
Maintained
Microload WL01CA32-41 — WL01CA32-43 WL01CA32-44
Plunger
Actuator Sealed top-roller
Top plunger Top-roller plunger Top-ball plunger
plunger
Standard load WLD WLD2 WLD3 WLD28
Top plunger
Microload WL01D WL01D2 WL01D3 WL01D28
Actuator Horizontal-roller Horizontal-ball

Horizontal plunger
plunger plunger
Standard load WLSD WLSD2 WLSD3
Side plunger
Microload WL01SD WL01SD2 WL01SD3
Flexible Rod
Actuator Coil spring (spring Coil spring (spring Coil spring Steel wire (wire
diameter: 6.5) diameter: 4.8) (resin rod diameter: 1)
diameter: 8)
Standard load WLNJ WLNJ-30 WLNJ-2 WLNJ-S2
Flexible rod
Microload WL01NJ WL01NJ-30 WL01NJ-2 WL01NJ-S2
11
WL
Indicator-equipped Switches
Lever
Actuator Adjustable roller
Roller lever R38 Roller lever R50 Roller lever R63
lever
Neon lamp WLCA2-LE WLCA2-7LE WLCA2-8LE WLCA12-LE
Basic
LED WLCA2-LD WLCA2-7LD WLCA2-8LD WLCA12-LD
General- Neon lamp WLH2-LE — — WLH12-LE
purpose LED WLH2-LD — — WLH12-LD
Neon lamp WLCA2-2LE — — WLCA12-2LE
Overtravel
90° LED WLCA2-2LD — — WLCA12-2LD
operation Neon lamp WLCA2-2NLE — — WLCA12-2NLE
LED WLCA2-2NLD — — WLCA12-2NLD
Actuator Adjustable rod lever Adjustable rod lever

Rod spring lever
25 to 140 mm 350 to 380 mm
Neon lamp WLCL-LE — —
Basic
LED WLCL-LD — —
General- Neon lamp WLHL-LE WLHAL4-LE WLHAL5-LE
purpose LED WLHL-LD WLHAL4-LD WLHAL5-LD
Neon lamp WLCL-2LE — —
Overtravel
90° LED WLCL-2LD — —
operation Neon lamp WLCL-2NLE — —
LED WLCL-2NLD — —
Actuator Fork lever lock (with Fork lever lock (with Fork lever lock (with
WL-5A100 Plastic WL-5A102 Plastic WL-5A104 Plastic
Roller Lever) Roller Lever) Roller Lever)
Neon lamp WLCA32-41LE WLCA32-42LE WLCA32-43LE
Maintained
LED WLCA32-41LD — WLCA32-43LD
Plunger
Actuator Sealed top-roller
Top plunger Top-roller plunger Top-ball plunger
plunger
Neon lamp WLD-LE WLD2-LE WLD3-LE WLD28-LE
Top plunger
LED WLD-LD WLD2-LD WLD3-LD WLD28-LD
Actuator Horizontal-roller Horizontal-ball

Horizontal plunger
plunger plunger
Neon lamp WLSD-LE WLSD2-LE WLSD3-LE
Side plunger
LED WLSD-LD WLSD2-LD WLSD3-LD
Flexible Rod
Actuator Coil spring
Coil spring (spring Coil spring (spring Steel wire (wire
(resin rod
diameter: 6.5) diameter: 4.8) diameter: 1)
diameter: 8)
Neon lamp WLNJ-LE WLNJ-30LE WLNJ-2LE WLNJ-S2LE
Flexible rod
LED WLNJ-LD WLNJ-30LD WLNJ-2LD WLNJ-S2LD
12
WL

Direct-wired Connectors
Item Overtravel
Basic
General-purpose
Built-in switch
Wiring Model Model
Actuator specification
connector Standard WLCA2-LDK13 WLH2-LDK13
Roller lever 2-conductor DC NO pins
No. 3, 4 Airtight seal WLCA2-55LDK13 WLH2-55LDK13
Standard WLCA2-LDK43 WLH2-LDK43
4-conductor DC
Airtight seal WLCA2-55LDK43 WLH2-55LDK43
connector Standard WLD2-LDK13 —
Top-roller 2-conductor DC NO pins
plunger No. 3, 4 Airtight seal WLD2-55LDK13 —
Standard WLD2-LDK43 —
4-conductor DC
Airtight seal WLD2-55LDK43 —
Pre-wired Connectors
Item Overtravel
Basic
General-purpose
Built-in switch
Wiring Model Model
Actuator specification
connector Standard WLCA2-LD-M1J WLH2-LD-M1J
pins
No. 3, 4 Airtight seal WLCA2-55LD-M1J —
NO
connector Standard WLCA2-LD-M1GJ WLH2-LD-M1GJ
2-conductor DC pins
No. 1, 4 Airtight seal WLCA2-55LD-M1GJ —
Roller lever
connector Standard — —
NC pins
No. 3, 2 Airtight seal WLCA2-55LD-M1JB —
Standard WLCA2-LD-DGJ03 WLH2-LD-DGJ03
4-conductor DC
Airtight seal WLCA2-55LD-DGJ03 —
connector Standard WLCA2-LD-DK1EJ03 —
3-conductor DC pins
No. 2, 3, 4 Airtight seal WLCA2-55LD-DK1EJ03 —
connector Standard WLD2-LD-M1J —
pins
No. 3, 4 Airtight seal WLD2-55LD-M1J —
NO
connector Standard WLD2-LD-M1GJ —
2-conductor DC pins
No. 1, 4 Airtight seal WLD2-55LD-M1GJ —
Top-roller
plunger connector Standard — —
NC pins
No. 3, 2 Airtight seal WLD2-55LD-M1JB —
Standard WLD2-LD-DGJ03 —
4-conductor DC
Airtight seal — —
connector Standard WLD2-LD-DK1EJ03 —
3-conductor DC pins
No. 2, 3, 4 Airtight seal WLD2-55LD-DK1EJ03 —
13
WL
Environment-resistant Switches Note: Models are also available with ground terminals.
Actuator
Roller lever R38
Overtravel
Basic
General-purpose
Item Model Model
No indicator WLCA2-55 WLH2-55
Airtight seal LED WLCA2-55LD WLH2-55LD
Indicator
Neon WLCA2-55LE WLH2-55LE
-139 NC wiring WLCA2-139LD2 —
Indicator
NO wiring WLCA2-139LD3 —
Molded
terminals Indicator
Hermetic NO wiring WLCA2-140LD3 —
seal No indicator WLCA2-141 WLH2-141
Indicator
NO wiring WLCA2-141LD3 WLH2-141LD3
No indicator WLCA2-RP60 WLH2-RP60
Anti-coolant NC wiring WLCA2-RP60LD2 —
Indicator
NO wiring WLCA2-RP60LD3 WLH2-RP60LD3
Heat-resistant WLCA2-TH WLH2-TH
Low-temperature WLCA2-TC WLH2-TC
No indicator
Corrosion-proof WLCA2-RP WLH2-RP
Weather-proof WLCA2-P1 WLH2-P1
Actuator
Roller lever R38
Overtravel
90° (-2 model) 90° (-2N model)
Item Model Model
No indicator WLCA2-255 WLCA2-2N55
Airtight seal LED WLCA2-255LD WLCA2-2N55LD
Indicator
Neon WLCA2-255LE WLCA2-2N55LE
No indicator WLCA2-2139 WLCA2-2N139
Indicator
NO wiring WLCA2-2139LD3 —
No indicator — WLCA2-2N140
Molded ter-
-140 NC wiring — —
minals Indicator
Hermetic NO wiring — —
seal No indicator — —
-141 NC wiring — —
Indicator
NO wiring — —
No indicator WLCA2-2RP60 —
Anti-coolant NC wiring WLCA2-2RP60LD2 —
Indicator
NO wiring WLCA2-2RP60LD3 —
Heat-resistant WLCA2-2TH WLCA2-2NTH
Low-temperature No indicator WLCA2-2TC WLCA2-2NTC
Corrosion-proof — —
14
WL
Actuator
Adjustable roller lever
Overtravel
Basic
General-purpose
Item Model Model
No indicator WLCA12-55 —
Airtight seal LED WLCA12-55LD —
Indicator
Neon WLCA12-55LE —
-139 WLCA12-139 —
Molded ter-
Hermetic -140 WLCA12-140 —
minals No indicator
seal -141 WLCA12-141 —
Anti-coolant WLCA12-RP60 —
Heat-resistant WLCA12-TH WLH12-TH
Low-temperature WLCA12-TC WLH12-TC
No indicator
Corrosion-proof WLCA12-RP WLH12-RP
Weather-proof WLCA12-P1 WLH12-P1
Actuator
Adjustable roller lever
Overtravel
90° (-2 model) 90° (-2N model)
Item Model Model
Heat-resistant WLCA12-2TH WLCA12-2NTH
No indicator
Low-temperature WLCA12-2TC WLCA12-2NTC
Actuator
Adjustable rod lever 25 to 140 mm
Overtravel
Basic
General-purpose
Item Model Model
No indicator WLCL-55 —
Airtight seal LED WLCL-55LD —
Indicator
Neon — —
-139 WLCL-139 —
Molded ter-
Hermetic -140 WLCL-140 —
minals No indicator
seal -141 — —
Anti-coolant WLCL-RP60 —
Heat-resistant WLCL-TH WLHL-TH
Low-temperature WLCL-TC WLHL-TC
No indicator
Corrosion-proof WLCL-RP WLHL-RP
Weather-proof WLCL-P1 WLHL-P1
Actuator
Adjustable rod lever 25 to 140 mm
Overtravel
90° (-2 model) 90° (-2N model)
Item Model Model
Heat-resistant WLCL-2TH WLCL-2NTH
Low-temperature No indicator WLCL-2TC WLCL-2NTC
Corrosion-proof WLCL-2RP —
15
WL
Actuator
Top-roller plunger Sealed top-roller plunger Horizontal plunger

No indicator WLD2-55 WLD28-55 WLSD-55
Airtight seal LED WLD2-55LD WLD28-55LD WLSD-55LD
Indicator
Neon WLD2-55LE WLD28-55LE —
Molded -139 WLD2-139 WLD28-139 WLSD-139
Hermetic terminals -140 No indicator — WLD28-140 —
seal
Anti-coolant WLD2-RP60 WLD28-RP60 WLSD-RP60
Heat-resistant WLD2-TH WLD28-TH WLSD-TH
Low-temperature No indicator WLD2-TC — WLSD-TC
Corrosion-proof WLD2-RP WLD28-RP WLSD-RP
Note: The standard cable length for models with airtight seals is 5 m.
Actuator Horizontal-roller Coil spring (spring Coil spring (resin rod

plunger diameter: 6.5) diameter: 8)
No indicator WLSD2-55 WLNJ-55 WLNJ-255
Airtight seal LED WLSD2-55LD WLNJ-55LD WLNJ-255LD
Indicator
Neon — — —
Molded -139 WLSD2-139 WLNJ-139 —
Hermetic terminals -140 No indicator WLSD2-140 WLNJ-140 WLNJ-2140
seal
Anti-coolant WLSD2-RP60 WLNJ-RP60 WLNJ-2RP60
Heat-resistant WLSD2-TH WLNJ-TH —
Low-temperature No indicator WLSD2-TC WLNJ-TC WLNJ-2TC
Corrosion-proof WLSD2-RP WLNJ-RP WLNJ-2RP
Note: The standard cable length for models with airtight seals is 5 m.
16
WL
Spatter-prevention Switches
Actuator
Roller lever
Sealed top-roller plunger
Double nut lever Allen-head lever

Neon lamp Basic WLCA2-LEAS WLCA2-LES WLD28-LES
operation
indicator Overtravel General-purpose WLH2-LEAS WLH2-LES —
LED Basic WLCA2-LDAS WLCA2-LDS WLD28-LDS
operation
indicator Overtravel General-purpose WLH2-LDAS WLH2-LDS —
Note: 1. For details of The WL high-sensitivity, high-precision models, refer to Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1).
2. Ask your OMRON representative about WL01@-@S Microload Switches.
Long-life Switches
Item LED operation indicator *1
Overtravel
Basic
General-purpose
Actuator Model Model
Roller lever, screw

terminal WLMCA2-LD WLMH2-LD
AC WLMCA2-LDK13A WLMH2-LDK13A
Roller lever, 2-conductor
DC WLMCA2-LDK13 WLMH2-LDK13
direct-wired
connector AC WLMCA2-LDK43A WLMH2-LDK43A
4-conductor
DC WLMCA2-LDK43 WLMH2-LDK43
2-conductor DC WLMCA2-LD-M1J WLMH2-LD-M1J

Roller lever,
pre-wired
connector *2
4-conductor DC WLMCA2-LD-DGJ03 WLMH2-LD-DGJ03
*1. The default setting is “light-ON when not operating.”
Turn the lamp holder by 180° to change the setting to “light-ON when operating”. (Ask your OMRON representative about 2-conductor models.)
Connecting Cables
Straight Cable
Voltage specification Number of conductors Cable length Model

2m XS2F-A421-DB0-F
2
5m XS2F-A421-GB0-F
AC
2m XS2F-A421-D90-F
4
5m XS2F-A421-G90-F
2m XS2F-D421-DD0
2
5m XS2F-D421-GD0
DC
2m XS2F-D421-D80-F
4
5m XS2F-D421-G80-F
17
WL
Individual Parts
Heads
Actuator type Set model Head model (with Actuator) Actuator type Set model Head model (with Actuator)
WLCA2 WL-1H1100 WLD WL-7H100
WLH2 WL-2H1100-1 * WLD2 WL-7H200
Roller lever Top plunger
WLCA2-2 WL-3H1100 WLD3 WL-7H300
WLCA2-2N WL-6H1100 WLD28 WL-7H400
WLCA12 WL-1H2100 WLSD WL-8H100
Horizontal
Adjustable WLH12 WL-2H2100-1 * WLSD2 WL-8H200
plunger
roller lever WLCA12-2 WL-3H2100 WLSD3 WL-8H300
WLCA12-2N WL-6H2100 WLCA32-41 WL-5H5100
WLCL WL-4H4100 Fork lever WLCA32-42 WL-5H5102
Adjustable lock
WLCL-2 WL-3H4100 WLCA32-43 WL-5H5104
rod lever
WLCL-2N WL-6H4100 WLCA32-44 WL-5H5104
Note: For details of The WL high-sensitivity, high-precision models, refer to WLNJ WL-9H100
Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1). WLNJ-30 WL-9H200
Coil spring
WLNJ-2 WL-9H300
WLNJ-S2 WL-9H400
* The model number of Heads without levers are same as those of Heads with levers without the numbers at the end.
Example: WL-1H1100 becomes WL-1H without the lever.
However, the WLH2 and WLH12 become WL-2H-1 for the Heads without levers.
Other Heads are also available. Ask your OMRON representative.
Switches without levers
Switches without levers

Actuator type
Model
Basic R38 WLRCA2
General-purpose overtravel, 80° WLRH2
Switches for roller levers
Overtravel, 90° operation WLRCA2-2
Overtravel, 90° operation WLRCA2-2N
Basic WLRCA2
Switches for adjustable General-purpose overtravel, 80° WLRH2
roller levers Overtravel, 90° operation WLRCA2-2
Overtravel, 90° operation WLRCA2-2N
Basic, 25 to 140 mm WLRCL
Switches for adjustable
Overtravel, 90° operation, 25 to 140 mm WLRCA2-2
rod lever
Overtravel, 90° operation, 25 to 140 mm WLRCA2-2N
Switches for top plungers — —
Switches for horizontal

— —
plungers
Maintained, WL-5A100
Switches for fork
Maintained, WL-5A102 WLRCA32
lever locks
Maintained, WL-5A104
Switches for coil springs — —
Covers with Operation Indicators

Cover
Cover only with
indicator
Item Model
Neon lamp WL-LE
LED WL-LD
Note: The default setting is "light-ON when not operating."
Turn the lamp holder by 180° to change the setting to "light-ON when operating."
18
WL
Spatter-prevention Products
Head (with actuator) Lever Cover with indicator Switches without Levers
Complete Heads Switches
Double Nut Allen-head Double Nut Cover with
with allen-head without
Lever Lever Lever Indicator
levers levers
Model Model Model Model Model Model
WLRCA2-LDS
Neon lamp
WL-LES WLRH2-LES
WL-1H1100S WL-2H1100S WL-1A103S WL-1A105S WLRH2-LDS
(for WLCA2-@) (for WLH2-@) Roller lever Roller Lever
LED (LED)
WL-LDS
WL Head Replacement
Heads can be replaced within the same model group. They cannot be replaced between different model groups.
Group No. Set model number Head model number (with Actuator)
WLCA2 WL-1H1100
WLCA2-7 WL-1H1200
1
WLCA2-8 WL-1H1300
WLCA12 WL-1H2100
2 WLCL WL-4H4100 *
WLH2 WL-2H1100-1
WLH12 WL-2H2100-1
3 WLHL WL-2H4100
WLHAL4 WL-2H4106
WLHAL5 WL-2H4107
WLCA2-2N WL-6H1100
4 WLCA12-2N WL-6H2100
WLCL-2N WL-6H4100
WLCA2-2 WL-3H1100
5 WLCA12-2 WL-3H2100
WLCL-2 WL-3H4100
WLCA32-41 WL-5H5100
WLCA32-42 WL-5H5102
6
WLCA32-43 WL-5H5104
WLCA32-44 WL-5H5104
WLD WL-7H100
7 WLD2 WL-7H200
WLD3 WL-7H300
8 WLD28 WL-7H400 *
WLSD WL-8H100
9 WLSD2 WL-8H200
WLSD3 WL-8H300
WLNJ WL-9H100
10
WLNJ-30 WL-9H200
11 WLNJ-2 WL-9H300 *
12 WLNJ-S2 WL-9H400 *
* This Heads are special and must be used. Do not use any other Head.
Specifications
Approved Standards
Agency Standard File No. Approved models
UL UL508 E76675
CSA CSA C22.2 No.14 LR45746
J50022353, Contact your OMRON representative for information on approved models.
TÜV Rheinland EN60947-5-1 J9950023,
J9950959
CCC (CQC) GB14048.5 2004010305128675
19
WL
General-purpose/Weather-proof Switches
Ratings
Standard-load Switches Microload Switches (Refer to these ratings before using the product.)
Item Non-inductive load (A) Inductive load (A) Rated voltage (V) Rated current (A) - Resistive load
Rated
Resistive Lamp Inductive Motor AC 125
voltage load load load load 0.1
(V) DC 30
Model NC NO NC NO NC NO NC NO
125 VAC 10 3 1.5 10 5 2.5 Operation in the following ranges will produce optimum performance.
250 VAC 10 2 1 10 3 1.5
500 VAC 10 1.5 0.8 3 1.5 0.8 5 to 30 VDC
Basic models, Recommended load range
8 VDC 10 6 3 10 6 0.5 to 100 mA
overtravel
models 14 VDC 10 6 3 10 6
Voltage (VDC)
30 VDC 6 4 3 6 4
125 VDC 0.8 0.2 0.2 0.8 0.2
250 VDC 0.4 0.1 0.1 0.4 0.1
Note: For details of The WL high-sensitivity, high-precision models, refer to
Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1).
30
Inrush NC 30 A max. Note: 1. The above figures are for steady-state
cur- currents.
NO 20 A max. 2. Inductive loads have a power factor of 0.4 min. 10
rent (AC) and a time constant of 7 ms max. (DC).
3. A lamp load has an inrush current of 10 5
times the steady-state current. 0.8 W
5 mW
4. A motor load has an inrush current of 6
times the steady-state current.
5. For PC loads, use the microload models.
1
0.1 0.16 1 5 10 100 Current (mA)
Minimum applicable load 5 VDC 160 mA
Recommended load range 5 VDC 1 mA
Approved Standard Ratings Characteristics

UL/CSA Degree of protection IP67
Durability Mechanical 15,000,000 operations min. *2
Standard-load Switches: A600, NEMA *1 Electrical 750,000 operations min. *3
Rated Carry cur- Current (A) Volt-amperes (VA) Operating speed 1 mm/s to 1 m/s (in case of WLCA2)
voltage rent Make Break Make Break Operating Mechanical 120 operations/minute min.
120 VAC 60 6 frequency Electrical 30 operations/minute min.
240 VAC 30 3 Rated frequency 50/60 Hz
10 A 7,200 720
480 VAC 15 1.5 Insulation resistance 100 MΩ min. (at 500 VDC)
600 VAC 12 1.2
25 mΩ max. (initial value for the built-in
Contact resistance
switch when tested alone) *6
Microload Switches Between terminals 1,000 VAC (600 VAC), 50/60 Hz for
0.1 A 125 VAC, 0.1 A 30 VDC of the same polarity 1 min
Between current-
2,200 VAC (1,500 VAC), 50/60 Hz for
TÜV (EN60947-5-1) (Only models with ground terminals are approved.) Dielectric carrying metal part
1 min/Uimp 2.5 kV
strength and ground
Application category Thermal cur- Between each termi-
Model Indicator 2,200 VAC (1,500 VAC), 50/60 Hz for
and ratings rent (Ithe) nal and non-current-
1 min/Uimp 2.5 kV
AC-15: 2 A/250 V carrying metal part
WL@ 10 A —
DC-12: 2 A/48 V Rated insulation voltage (Ui) 250 V (EN60947-5-1)
AC-14: 0.1 A/125V Pollution degree (operating
WL01@ 0.5 A — 3 (EN60947-5-1)
DC-12: 0.1 A/48 V environment)
WL@-LE AC-15: 2 A/250 V 10 A Neon lamp Short-circuit protective device (SCPD) 10 A, fuse type gG or gI (IEC60269)
WL01@-LE AC-14: 0.1 A/125 V 0.5 A Neon lamp Conditional short-circuit current 100 A (EN60947-5-1)
Conventional enclosed thermal
AC-15: 2 A/115 V 10 A, 0.5 A (EN60947-5-1)
WL@-LD 10 A LED current (Ithe)
DC-12: 2 A/48 V
Protection against electric shock Class I
AC-14: 0.1 A/115 V
WL01@-LD 0.5 A LED Vibration
DC-12: 0.1 A/48 V Malfunction 10 to 55 Hz, 1.5-mm double amplitude *4
resistance
Note: As an example, AC-15: 2 A/250 V means the following: Destruction 1,000 m/s2 max.
Shock
Application category AC-15 resistance Malfunction 300 m/s2 max. *4
Rated operating current (Ie) 2A Ambient operating temperature –10°C to +80°C (with no icing) *5
Rated operating voltage (Ue) 250V Ambient operating humidity 35% to 95% RH
Weight Approx. 275 g (in case of WLCA2)
Note: 1. The above figures are initial values.
Indicator-equipped Switches 2. The figures in parentheses for dielectric strength are those for the
microload models.
*1. The values are calculated at an operating temperature of +5°C to +35°C and an
Model Item Max. rated voltage (V) Leakage current (mA) operating humidity of 40% to 70%RH. Contact your OMRON sales
Neon 125 AC Approx. 0.6 representative for more detailed information on other operating environments.
WL-LE *2. Durability is 10,000,000 operations min. for general-purpose overtravel
lamp 250 AC Approx. 1.9 models, and for flexible rod models.
115 AC/DC Approx. 0.5 500,000 operations min. for weather-proof models.
WL-LD LED *3. Microload models are 1,000,000 operations min.
10 to 24 AC/DC Approx. 0.4
500,000 operations min. for weather-proof models.
*4. Except flexible rod models. The shock resistance (malfunction) for
microload models is 200 m/s2 max.
*5. For low-temperature models this is –40°C to +40°C (with no icing). For heat-
resistant models the range is +5°C to +120°C.
*6. For microload models, the contact resistance is 50 mΩ max. (initial value for
built-in switch).
20
WL
Spatter-prevention Switches
Ratings Characteristics
Screw terminals Degree of protection IP67
Item Non-inductive load (A) Inductive load (A) Durability Mechanical 15,000,000 operations min. *2
Rated Resistive Lamp Inductive Motor *1 Electrical 750,000 operations min. *3
voltage (V) load load load load
Operating speed 1 mm/s to 1 m/s (in case of WLCA2)
Model NC NO NC NO NC NO NC NO
125 VAC 10 3 1.5 10 5 2.5 Operating Mechanical 120 operations/minute min.
WL@-LES frequency Electrical
250 VAC 10 2 1 10 3 1.5 30 operations/minute min.
115 VAC 10 3 1.5 10 5 2.5 Rated frequency 50/60 Hz
WL@-LDS 12 VDC 10 6 3 10 6 Insulation resistance 100 MΩ min. (at 500 VDC)
24 VDC 6 4 3 6 4
48 VDC 3 2 1.5 3 2 25 mΩ max. (initial value for the built-
Contact resistance
in switch when tested alone)
Note: 1. The above figures are for steady-state currents.
2. Inductive loads have a power factor of 0.4 min. (AC) and a time Between
constant of 7 ms max. (DC). terminals of
1,000 VAC, 50/60 Hz for 1 min
3. A lamp load has an inrush current of 10 times the steady-state current. the same
4. A motor load has an inrush current of 6 times the steady-state current. polarity
Between
Inrush NC 30 A max. current-
2,200 VAC, 50/60 Hz for 1 min/Uimp
current NO 20 A max. carrying
Dielectric 2.5 kV
metal part
Operating temperature –10°C to +80°C (with no icing) strength
and ground
Operating humidity 35% to 95%RH max. Between
each
Approved Standard Ratings terminal and 2,200 VAC, 50/60 Hz for 1 min/Uimp
UL/CSA non-current- 2.5 kV
carrying
LE Switches (Neon lamp): A300 metal part
Rated Carry Current (A) Volt-amperes (VA) Rated insulation voltage
250 V (EN60947-5-1)
voltage current (Ui)
Make Break Make Break
Pollution degree
120 VAC 60 6 3 (EN60947-5-1)
10 A 7,200 720 (operating environment)
240 VAC 30 3
Short-circuit protective
10 A, fuse type gG or gI (IEC60269)
device (SCPD)
LD Switches (LED)
Conditional short-circuit
Rated voltage Carry current 100 A (EN60947-5-1)
current
115 VAC 10 A Conventional enclosed
10 A, 0.5 A (EN60947-5-1)
115 VDC 0.8 A thermal current (Ithe)
Protection against
Class I
CCC (GB14048.5) electric shock
Vibration
Model Application category and ratings Malfunction 10 to 55 Hz, 1.5-mm double amplitude
resistance
AC-15: 2 A/250 V
WL@ Shock Destruction 1,000 m/s2 max.
DC-12: 2 A/48 V
resistance Malfunction 300 m/s2 max.
AC-14: 0.1 A/125V
WL01@ Ambient operating
DC-12: 0.1 A/48 V –10°C to +80°C (with no icing)
temperature
WL@-LE AC-15: 2 A/250 V
WL01@-LE AC-14: 0.1 A/125 V Ambient operating
35% to 95%RH
humidity
AC-15: 2 A/115 V
WL@-LD Weight Approx. 275 g (in case of WLCA2)
DC-12: 2 A/48 V
AC-14: 0.1 A/115 V Note: The above figures are initial values.
WL01@-LD *1. The values are calculated at an operating temperature of +5°C to +35°C and
DC-12: 0.1 A/48 V an operating humidity of 40% to 70%RH. Contact your OMRON sales
Note: As an example, AC-15: 2 A/250 V means the following: representative for more detailed information on other operating
environments.
*2. Durability is 10,000,000 operations min. for general-purpose overtravel
Application category AC-15 models.
Rated operating current (Ie) 2 A *3. Microload models are 1,000,000 operations min.
Rated operating voltage (Ue) 250 V
21
WL
Long-life Switches
Ratings
General Ratings (Refer to these ratings before using the product.)
Screw Terminal Switches Direct-wired Connector and Pre-wired Connector Switches
Item Non-inductive load (A) Inductive load (A) Non-inductive load (A) Inductive load (A)
Rated Rated
Resistive Lamp Induc- Motor Resistive Inductive
voltage Model voltage Lamp load Motor load
load load tive load load load load
(V) (V)
Model NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO
115 AC 10 3 1.5 10 5 2.5 12 DC 3 3 3 3 3 3 3 3
Basic models, 12 DC 10 6 3 10 6 24 DC 3 3 3 3 3 3 3 3
overtravel mod- 24 DC 6 4 3 6 4 DC
48 DC 3 3 3 3 3 3 3 3
els 48 DC 3 2 1.5 3 2
115 DC 0.8 0.2 0.2 0.8 0.2 115 DC 0.8 0.8 0.2 0.2 0.8 0.8 0.2 0.2
AC 115 AC 3 3 3 1.5 3 3 3 2.5
Inrush NC 30 A max. Note: 1. The above figures are for steady-state currents.
2. Inductive loads have a power factor of 0.4 min. (AC) and a time
current NO 20 A max. constant of 7 ms max. (DC).
3. A lamp load has an inrush current of 10 times the steady-state current.
4. A motor load has an inrush current of 6 times the steady-state current.
Characteristics Engineering Data

Degree of protection IP67 Electrical Durability: cosφ= 1
Mechanical 30,000,000 operations min. (Operating temperature: +5°C to +35°C, operating humidity: 40% to
30,000,000 operations min. (10 mA at 70%RH)
Durability * 24 VDC, resistive load)
Electrical 1,000
750,000 operations min. (10 A at 115 Operating frequency:
Durability (× 10 operations)
30 operations/min cos φ= 1
VAC, resistive load) 500
125 VAC
Operating speed 1 mm/s to 1 m/s (in case of WLCA2)
300
Operating Mechanical 120 operations/minute
4
250 VAC
frequency Electrical 30 operations/minute
Rated frequency 50/60 Hz 100
480 VAC
Insulation resistance 100 MΩ min. (at 500 VDC)
25 mΩ max. (initial value for the built- 50
Contact resistance
in switch when tested alone)
30
Between
terminals of 10
1,000 VAC (except connector models)
the same
polarity
0 2 4 6 8 10 12
Between
Switching current (A)
Dielectric current-
strength carrying 2,200 VAC (1,500 V)
(50/60 Hz metal part
for 1 min) and ground
Between each
terminal and
non-current- 2,200 VAC (1,500 V)
carrying metal
part
Vibration
Malfunction 10 to 55 Hz, 1.5-mm double amplitude
resistance
Shock Destruction 1,000 m/s2 max.
resistance Malfunction 300 m/s2 max.
Ambient operating
–10°C to +80°C (with no icing)
temperature
Ambient operating
35% to 95%RH
humidity
Weight Approx. 275 g (in case of WLCA2)
Note: The figures in parentheses for dielectric strength, are those for connector
models.
* The values are calculated at an operating temperature of +5°C to +35°C, and
an operating humidity of 40% to 70%RH. Contact your OMRON sales
representative for more detailed information on other operating environments.
22
WL
Structure and Nomenclature
Structure
General-purpose Switches: WLCA2
Head-mounting Screws Actuator

Roller
Head The roller is made of self-lubricating
The Head used in the roller lever type,
sintered stainless steel and boasts
adjustable rod lever type, or horizontal
high resistance to wear.
plunger type (except for 90° operation
models) can be mounted in any of the Lever
four directions by removing the screws The lever forged of anti-corrosive
at the four corners of the Head. aluminium alloy features high corrosion
resistances and outstanding ruggedness.
Shaft Section Seal With roller lever, adjustable rod and
By fitting an O-ring to the rotary shaft
flexible rod models, the actuator position
and with an appropriate interference
can be set anywhere within 360°. (The
of the screws, high-sealing properties
lever cannot be mounted in the opposite
are maintained.
direction.)
Roller Lever Setscrew
Operational Plunger *2 Set Position Marker Plate

After operation, set the indicator needle
Bearing on the marker plate so that is in the
The bearing smooths the
convex section of the bearing. For the
plunger movement.
WLD2, insert the needle so that it is
Built-in Switch between the two main wires on the
plunger.
Built-in switch with SPST-NO+NC
contact form. Requires maintenance
(excessive overtravel)
Proper range
Terminal Screws Requires maintenance (insufficient overtravel)
Proper range
Four, M4 screws Requires maintenance
(excessive overtravel)
Separator Cover Seal

The separator has outstanding insulation By using a packing seal as the cover seal,
properties and prevents the generation of any an optimum squeeze can be obtained and
gases which may corrode the internal parts. high sealing properties are assured as well.
Conduit Opening *1
The conduit threads are parallel threads Cover
for G½ tube and offer further increased
sealing properties when used in
Cover Setscrew
Phillips screws are used
conjunction with the SC connector.
to ensure ease of use.
*1. The display for conduit threads has changed from PF½ to G½, according to revisions of JIS B 0202. This is only a change in the display, so the thread size and
pitch have not changed. (Conduit threads Pg 13.5 and ½-14NPT are also available.)
*2. By changing the orientation of the operational plunger, any one of the three operational directions (both sides, left, or right) can be selected electrically.
23
WL
Indicators
Indicator Covers Indicator

The indicator covered if outsert molded The indicator is either a neon lamp or
from diecast aluminum and has an LED. Models with LED indicators
outstanding sealing properties. have a built-in rectifier stack, so it is not
Indicator Windows necessary to change the polarity.
Operation (i.e., light-ON when operating
or light-ON when not operating) depends
on whether a neon lamp or LED is used. Contact Spring
The built-in switch's terminal screws
Light-ON when Operating/Not Operating are used to connect the indicator
Indicators can be switched from light-ON terminal. Since the connection spring
when operating and light-ON when not (coil spring) is used for this connection,
operating, by simply rotating the indicator it will not be necessary to connect the
holder by 180°. indicator terminal. When a ground
(Molded terminals cannot be switched in terminal is provided however, a lead
this way.) wire must be used.
Light-ON when Operating Light-ON when Not Operating
LED at top
LED at bottom
Operation Internal Circuits
Power Neon lamp

Built-in switch
Za Contact spring
4 3 WL-LE
Light-ON when Resistor
operating *1 1 2
Load
Internal circuits
WL-LE
WL-LD Contact spring
Rectifier stack
Power
Rated
Internal circuits Resistor current
diode
WL-LD
Light-ON when Za
Load Zener
not operating *2 4 3 diode Resistor
1 2
LED
Built-in switch
Note: 1. The indicator cover cannot be replaced on the molded terminals. In all cases the indicator does not light when the load is ON.
2. Leakage current from indicator circuit may cause load's malfunction. Please check the load's OFF current before use the indicator-equipped switch.
*1. Light-ON when operating means that the lamp lights when the Limit Switch contacts (NC) release, or when the actuator rotates or is pushed down.
*2. Light-ON when not operating means the lamp remains lit when the actuator is free, or when the Limit Switch contacts (NO) close when the actuator rotates or is
pushed down.
24
WL
Environment-resistant Switches
Mold Specifications for Hermetic Seal Switches

: Molded parts
WL@-139 WL@-140 WL@-141
Oil seal for protection against cutting powder
X-ring
Standard
Airtight Airtight
built-in
built-in built-in
switch
switch switch
WL@-145 WL@-RP40 WL@-RP60

Oil seal for protection against cutting powder O-ring
X-ring
Airtight Airtight Airtight

built-in built-in built-in
switch switch switch
* Florine rubber is used for

all rubber parts.
Model Cable specifications

WL@-139 Standard 5-m VCT (vinyl cabtire cable) cable attached. Finished diameter: 11.5 mm, 4-conductor.
WL@-140
WL@-141
Standard 5-m VCT cable, with high flexibility and good anti-oil properties attached. Finished
WL@-145
diameter: 11.5 mm, 4-conductor.
WL@RP40
WL@RP60
Spatter-prevention Switches: WLCA2-LEAS
Actuator
Roller, Roller Axis
Using stainless steel prevents spatter
from adhering. Screws
Operating Lever SUS is used, preventing spatter
Melamine sinter-painted, it is easy to from adhering.
peel off the spatter. Head Cap
Using fluororesin prevents spatter
Double Nut
from adhering.
SUS is used for double nut.
* Spatter means the zinc powder
produced when welding.
Lamp Cover Adhering spatter to the Limit Switch
· Heat-resistant resin is used for the
may cause malfunction of lever or
lamp cover.
lamp cover.
· By using spherical surface for the
display part, it disperses the direction The lack of gap prevents spatter
of spatter. powder from clogging.
25
WL
Long-life Switches: WLMCA2-LD
Release Plunger
Hardening method changed for greater Set Position Marker Plate
abrasion resistance. The set position is easy to view.
Long-life Model The stroke is indicated in fluorescent color that
Standard Model
is visible from the slit in the rubber cap.
Stainless
Sintered steel +
Standard Model Long-life Model
alloy Hardening
Head
The Head can be mounted in any of the
four directions by removing the screws Fluorescent paint
at the four corners of the Head.
Shaft Section Seal Requires maintenance (excessive overtravel)
By fitting a double seal consisting of an Proper range
Requires maintenance (insufficient overtravel)
oil seal and an X-ring to the rotary Proper range
shaft, even greater sealing properties Requires maintenance (excessive overtravel)
are achieved.
Standard Model Long-life Model
Actuator
Head Roller
Mounting The roller is made of self-lubricating stainless
Screws sintered and boasts high resistance to wear.
O-ring
Oil seal X-ring
Lever
Smoother Movement The lever forged of anti-corrosive aluminium
A grease holder is provided on the alloy features high corrosion resistance and
shaft to prevent the grease from outstanding ruggedness. With roller lever
running out. models, the actuator position can be set
Standard Model anywhere within 360°. (The lever cannot be
mounted in the opposite direction.)
Operational Plunger *
Cover Seal
By using a packing seal as the
Long-life Model cover seal, an optimum squeeze
can be obtained and high sealing
properties are assured as well.
Grease holder Terminal Screws
Smooth movement is achieved using Four, M4 screws
olefin grease. (Standard models use
molybdenum disulfide grease.) Cover
Separator
Bearing The separator has outstanding
The bearing smooths the plunger insulation properties and prevents
movement. the generation of any gases
Built-in Switch which may corrode the internal
Built-in switch with SPST-NO+NC parts.
contact form. Cover Mounting Screw
Phillips screws are used to
Conduit Opening ensure ease of use.
In addition to level screws which use G½
tube, direct-wired and pre-wired connectors
have been added to the Series.
* By changing the direction of the operational plunger, any one of the three
operational directions (both sides, left, or right) can be selected.
26
WL
Contact Forms
Screw Terminal Switches Screw Terminal Switches
Indicator-equipped (Light-ON when Not Operating)
Switches *1
Za Internal
(NO) 4 3 (NO) circuits
Za
(NO) 4 3 (NO)
(NC) 1 2 (NC)
(NC) 1 2 (NC)
Direct-wired Connector Switches Pre-wired Connector Switches

Indicator-equipped (Light-ON when Not Operating) Indicator-equipped (Light-ON when Not Operating)
Switches *1 Switches *1
AC DC DC (2-core) DC (3-core, 4-core)
Internal Internal Internal Internal
circuits circuits circuits circuits
Za Za Za Za
NO NC NC NO NO NC NC NO NO NC NC NO NO NC NC NO
connector pin 2-core 4 -- -- 3 connector pin 2-core 4 -- -- 3 4 -- -- 3 connector pin 3-core 4 -- 2 3
No. 4-core 4 1 2 3 No. 4-core 4 1 2 3 connector pin
2-core 4 1 No. 4-core 4 1 2 3
No.
3 2
Positioning piece *2 Positioning piece *2
2 2
NC NC
NC NC
3 1 3 1
NO NO
4 4
NO NO
Note: Leakage current from indicator circuit may cause load's malfunction. Please check the load's OFF current before use the indicator-equipped switch.
*1. Light-ON when not operating means the indicator is lit when the actuator is free and is not light when the Switch contacts (NO) close when the actuator rotates or
is pushed down.
*2. The position of the positioning piece is not always the same. If using an L-shaped connector causes problems in application, use a straight connector.
27
WL
Dimensions and Operating Characteristics (Unit: mm)
General-purpose Models
Standard Models
Basic
Rotating Lever ........ For all models WL@ indicates a standard-load model and WL01@ indicates a microload model.
Roller lever R38 60 max.
53 ±1.5
Roller lever R50 67.2 max.
58.1 ±1.5
WLCA2 41.5 ±1.5 WLCA2-7 17.5 dia. × 15 * 36 ±1.5
40 ±1.5 13.1
WL01CA2 17.5 dia. × 7 * 13.1 WL01CA2-7
25.4
25.4
50R Four, M3.5 12.7
Four, M3.5 12.7
38R
M5 (length: 12)
Allen-head bolt M5 (length: 12) 25.4
25.4 Allen-head bolt
14.7 (137) 14.7
(125)
Four, 5.2 +0.2
0
Four, 5.2 +0.2
0 dia. holes
dia. holes 58.7 ±0.2 68.7
58.7 ±0.2 68.7 Three, M4
Three, M4 (length: 13)
(lengh:13)
5
5 21.6
21.6 Four, M6 (15.1) ±1.2 Four, M6
JIS B0202 G½ ±1.2 (4.9) JIS B0202 G½ 29.2 Depth: 15 min.
(15.1) Depth: 15 min. 30.2 ±0.2
(4.9) Effective thread: 29.2 Effective thread: 35
30.2 ±0.2 4 threads min. 40 ±0.7
35 4 threads min. 42 max.
40 ±0.7
60 max. * Stainless steel roller 53.2 ±0.8
* Stainless sintered roller
53.2 ±0.8
Roller lever R63 60 max.

53 ±1.5
Adjustable Roller Lever 67 max.
60 ±1.5
WLCA2-8 17.5 dia. × 7 *
41.5 ±1.5 WLCA12 17.5 dia. × 7 * 41.5 ±1.5
WL01CA2-8 40 ±1.5
WL01CA12 13.1
25.4
13.1 Four, M3.5 12.7
25.4 Adjustable range:
63R
12.7 25 to 89 M5 (length: 16)
Four, M3.5
Allen-head bolt 25.4
Four, 5.2 +0.2
0
14.7 Four, 5.2 +0.2
0
dia. holes 25.4 dia. holes
(150)
14.7
M5 (length: 12)
Allen-head bolt 58.7 ±0.2 68.7
Three, M4
(length: 13)
58.7 ±0.2 68.7
Three, M4
(length: 13) 5
21.6
5 ±1.2
Four, M6
(15.1) Depth: 15 min.
21.6 (4.9) 29.2
30.2 ±0.2 JIS B0202 G½
(15.1) JIS B0202 G½ Four, M6 35
(4.9) ±1.2 40 ±0.7 Effective thread:
Effective thread: 29.2 Depth: 15 min.
30.2 ±0.2 4 threads min. 42 max.
40 ±0.7 4 threads min. 35 * Stainless sintered roller 65.2 ±0.8
42 max.
* Stainless sintered roller 53.2 ±0.8
Adjustable Rod Lever (25 to 140 mm) Fork Lever Lock 62.5 max.
56.4 ±3.5
55 max.
WLCL 9
46 ±1.5 WLCA32-41 to 44 42.8 ±3.5
13.1
WL01CL WL01CA32-41 to 44 Two, 17.5 dia.
(length: 7) * 25.4
3 ±0.2 dia. 13.1
(length: 160) * (For details 90 ±3° 12.7
25.4
Adjustable range:
Four, M3.5 M8 ×12 see page 42) R38
25 to 140 12.7 Four, M3.5
Allen-head
set screw 34.1
M5 × 12 14.7 M5 × 16
Allen-head 25.4 Allen-head bolt
(125)
14.7 bolt
Four, 5.2 +0.2
0
Four, 5.2 +0.2 dia. holes
0
dia. holes 58.7 ±0.2 68.7
Three, M4
58.7 ±0.2 68.7 (length: 13)
Three, M4
(length: 13) 5
21.6
5 JIS B0202 G½ Four, M6
(15.1) ±1.2
21.6 (4.9) Effective thread: 29.2 Depth: 15 min.
JIS B0202 G½ Four, M6 30.2 ±0.2 4 threads min.
(15.1) ±1.2 Note: This illustration shows 35
Effective thread: 29.2 Depth: 15 min. 40 ±0.7
(4.9) the external dimensions * Plastic roller 42 max.
30.2 ±0.2 4 threads min.
40 ±0.7 35 of the WLCA32-41. (Models WLCA32-041 to -044 and WL01CA32-
* Stainless steel rod 42 max. 041 to -044 have stainless steel rollers.)
Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
Model WLCA2 WLCA2-7 WLCA2-8 WLCA12 *1 WLCL *2 Model WLCA32-41 to 44 *1

Operating characteristics WL01CA2 WL01CA2-7 WL01CA2-8 WL01CA12 *1 WL01CL *2 Operating characteristics WL01CA32-41 to 44 *1
Operating force OF max. 13.34 N 10.2 N 8.04 N 13.34 N 1.39 N Force necessary to reverse the 11.77 N
Release force RF min. 2.23 N 1.67 N 1.34 N 2.23 N 0.27 N direction of the lever: Max.
Pretravel PT 15° ±5° 15° ±5° 15° ±5° 15° ±5° 15° ±5° Movement until the lever reverses 50° ±5°
Overtravel OT min. 30° 30° 30° 30° 30° Movement until switch operation: Min. 55°
Movement Differential MD max. 12° 12° 12° 12° 12° Movement after switch operation: Max. 35°
*1. The operating characteristics for WLCA12 and WL01CA12 are measured at the lever length of OF and RF for WLCA12, with a lever length of 89 mm.
38 mm. WLCA12, WL01CA12
*2. The operating characteristics for WLCL and WL01CL are measured at the rod length of 140 mm. OF 5.68 N
RF 0.95 N
28
WL
Basic
Plunger .................... For all models WL@ indicates a standard-load model and WL01@ indicates a microload model.
Top Plunger Horizontal Plunger PT OP
46.6 ±0.8
13.1
WLD 9.2 dia. 12.9
WLSD Four, M3.5
13.1
12.7
WL01D PT 1R * WL01SD 25.4
Four, M3.5 27.5

OP 19.9 17.8
1R *1
+0.2 25 dia. *2
Four, 5.2 0
Four, 5.2 +0.2
0
(96.2)
dia. holes
dia. holes
58.7 ±0.2 68.7
58.7 ±0.2 68.7 Three, M4
Three, M4
(length: 13)
(length: 13)
5
5
21.6 21.6
Four, M6 JIS B0202 G½ ±1.2 Four, M6
JIS B0202 G½ ±1.2 Depth: 15 min. (15.1)
(15.1) (4.9) Effective thread: 29.2 Depth: 15 min.
(4.9) Effective thread: 29.2 30.2 ±0.2
4 threads min. 35 40 ±0.7 35
40 ±0.7
*1. Stainless steel plunger 42 max.
* Stainless steel plunger 42 max. *2. Cosmetic nuts
Top-roller Plunger 13.1 Horizontal-roller Plunger PT OP

55.7 ±0.8
WLD2 12.9 WLSD2 Four, M3.5 13.1
25.4 17.5 dia. 12.7
WL01D2 PT
17.5 dia. (length: 4.6) *
WL01SD2 (length: 4.6)*1
27.5
OP Four, M3.5
28 17.8
25 dia. *2
(96.2) Four, 5.2 +0.2
0
Four, 5.2 +0.2
0 dia. holes
dia. holes 58.7 ±0.2 68.7
Three, M4
58.7 ±0.2 68.7
(length: 13)
5
5 21.6
JIS B0202 G½ ±1.2 Four, M6
21.6 (15.1)
JIS B0202 G½ Four, M6 (4.9) Effective thread: 29.2 Depth: 15 min.
(15.1) ±1.2 30.2 ±0.2
(4.9) Effective thread: 29.2 Depth: 15 min. 4 threads min.
40 ±0.7 35
30.2 ±0.2
40 ±0.7 4 threads min. 35 *1. Stainless sintered roller 42 max.
*2. Cosmetic nuts
* Stainless sintered roller 42 max. Note: The WLSD21 model, which has the roller rotated by 90° is also available.
Top-ball Plunger 13.1 Horizontal-ball Plunger PT OP

46.6 ±0.8
WLD3 15.5 dia. 1/2 dia. * 12.9 WLSD3 Four, M3.5
13.1
WL01D3 PT WL01SD3 25.4 12.7
OP Four, M3.5 27.5

19.9 17.8
1/2 dia. *1
25 dia. *2
Four, 5.2 +0.2
0
(96.2) Four, 5.2 +0.2
0
dia. holes dia. holes 68.7
68.7 58.7 ±0.2
58.7 ±0.2 Three, M4
Three, M4
(length: 13)
(length: 13)
5
5
21.6
21.6 JIS B0202 G½ Four, M6
Four, M6 (15.1) ±1.2
(15.1) JIS B0202 G½ ±1.2
(4.9) Effective thread: 29.2 Depth: 15 min.
(4.9) Effective thread: 29.2 Depth: 15 min. 30.2 ±0.2 4 threads min.
30.2 ±0.2 35 40 ±0.7 35
40 ±0.7 4 threads min.
42 max. *1. Stainless steel ball 42 max.
* Stainless steel ball *2. Cosmetic nuts
Sealed Top-roller Plunger 13.1
WLD28 11.2 dia. (length: 5) *

12.9
WL01D28 PT
OP Four, M3.5
24
Four, 5.2 +0.2

0
dia. holes
58.7 ±0.2 68.7
Three, M4
(length: 13)
5
21.6
(15.1) JIS B0202 G½ ±1.2 Four, M6
(4.9) Effective thread: 29.2 Depth: 15 min.
30.2 ±0.2
40 ±0.7 4 threads min. 35 Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all
* Stainless steel roller 42 max. dimensions.
Model WLD WLD2 WLD3 WLD28 WLSD2 WLSD3 WLSD

Operating characteristics WL01D WL01D2 WL01D3 WL01D28 WL01SD2 WL01SD3 WL01SD
Operating force OF max. 26.67 N 26.67 N 26.67 N 16.67 N 40.03 N 40.03 N 40.03 N
Release force RF min. 8.92 N 8.92 N 8.92 N 4.41 N 8.89 N 8.89 N 8.89 N
Pretravel PT max. 1.7 mm 1.7 mm 1.7 mm 1.7 mm 2.8 mm 2.8 mm 2.8 mm
Overtravel OT min. 6.4 mm 5.6 mm 4 mm 5.6 mm 5.6 mm 4 mm 6.4 mm
Movement Differential MD max. 1 mm 1 mm 1 mm 1 mm 1 mm 1 mm 1 mm
Operating Position OP 34 ±0.8 mm 44 ±0.8 mm 44.5 ±0.8 mm 44 ±0.8 mm 54.2 ±0.8 mm 54.1 ±0.8 mm 40.6 ±0.8 mm
Total travel Position TTP max. 29.5 mm 39.5 mm 41 mm 39.5 mm — — —
29
WL
Basic
Flexible Rod ............ For all models WL@ indicates a standard-load model and WL01@ indicates a microload model.
Coil Spring Coil Spring (Multi-wire)
WLNJ PT
*1
6.5 dia.
*2 WLNJ-30 PT 4.8 dia.
*1
WL01NJ *3
WL01NJ-30 *2
*3
(107) 13.1 (107) 13.1
140 ±2.5 140 ±2.5
32.7 ±0.8 32.7 ±0.8
Four, 5.2 +0.2

0 Four, 5.2 +0.2
0
dia. holes dia. holes
58.7 ±0.2 68.7 58.7 ±0.2 68.7
Three, M4 Three, M4
(length: 13) (length: 13)
5 5
21.6 21.6
(15.1) JIS B0202 G½ ±1.2 Four, M6 ±1.2 Four, M6
29.2 Depth: 15 min. (15.1) JIS B0202 G½
(4.9) Effective thread: (4.9) 29.2 Depth: 15 min.
30.2 ±0.2 30.2 ±0.2 Effective thread:
40 ±0.7 4 threads min. 35 40 ±0.7 35
4 threads min.
42 max. 42 max.
*1. The coil spring may be operated from any direction except the *1. The coil spring may be operated from any direction except the
axial direction (↓). axial direction (↓).
*2. Stainless steel coil spring *2. Piano wire coil
*3. Optimum operating range of the coil spring is within 1/3 of the *3. Optimum operating range of the coil spring is within 1/3 of the
entire length from the top end. entire length from the top end.
Coil Spring (Resin Rod) PT 8 dia.

Steel Wire
WLNJ-2 *1
WLNJ-S2 PT 1 dia.
*2
WL01NJ-2 *3
WL01NJ-S2 *1
*2
*3
(95.4)
(161) 13.1
26 dia. 13.1
193 ±2.5
140 ±2.5
44.6 ±0.8 32 ±0.8
Four, 5.2 +0.2

0
Four, 5.2 +0.2
0
dia. holes
dia. holes 58.7 ±0.2 68.7
68.7 Three, M4
58.7 ±0.2
(length: 13)
5
5 21.6
21.6 JIS B0202 G½ ±1.2 Four, M6
(15.1)
JIS B0202 G½ ±1.2 Four, M6 (4.9) Effective thread: 29.2 Depth: 15 min.
(15.1) 30.2 ±0.2
(4.9) Effective thread: 29.2 Depth: 15 min. 40 ±0.7 4 threads min. 35
30.2 ±0.2 35
40 ±0.7 4 threads min.
42 max. 42 max.
*1. The resin rod may be operated from any direction except the axial *1. The steel wire may be operated from any direction except the
direction (↓). axial direction (↓).
*2. Polyamide resin rod *2. Stainless steel wire
*3. Optimum operating range of the resin rod is within 1/3 of the *3. Optimum operating range of the steel wire is within 1/3 of the
entire length from the top end. entire length from the top end.
Model WLNJ * WLNJ-30 * WLNJ-2 * WLNJ-S2 *

Operating characteristics WL01NJ * WL01NJ-30 * WL01NJ-2 * WL01NJ-S2 *
Operating force OF max. 1.47 N 1.47 N 1.47 N 0.28 N
Pretravel PT 20 ±10mm 20 ±10mm 40 ±20mm 40 ±20mm
* These values are taken from the top end of the wire or spring.
30
WL
Overtravel
General-purpose Models ......................................... For all models WL@ indicates a standard-load model and WL01@ indicates a microload model.
Roller Lever R38 60 max. Adjustable Rod Lever 9 55 max.

WLH2 53 ±1.5
41.5 ±1.5 WLHL 46 ±1.5
17.5 dia. (length: 7) * 3 ±0.2 dia. 41.5 ±1.5
WL01H2 40 ±1.5
13.1 WL01HL (length: 160) * 13.1
25.4 Adjustable range: 25.4
Four, M3.5 12.7 Four, M3.5
38R 25 to 140 12.7
M5 (length: 12) M8 (length: 12)
Allen-head bolt Allen-head
25.4
lock screw 25.4
14.7
(125) 14.7 M5 (length: 12)
Allenhead bolt
Four, 5.2+0.2
0
dia. holes Four, 5.2+0.2
0
58.7 ±0.2 68.7 dia. holes
Three, M4 58.7 ±0.2 68.7
(length: 13) Three, M4
(length: 13)
5
21.6 Four, M6 5
JIS B0202 G½ ±1.2 21.6
(15.1) Effective thread: 29.2 Depth: 15 min. (15.1) JIS B0202 G½ ±1.2
(4.9) Four, M6
35 (4.9) Effective thread: 29.2
30.2 ±0.2 4 threads min. 30.2 ±0.2 Depth: 15 min.
40 ±0.7 42 max. 40 ±0.7 4 threads min. 35
53.2 ±0.8 42 max.
* Stainless sintered roller * Stainless sintered roller
Note: The built-in switch for WLH2 is W-10FB3. Note: The built-in switch for WLHL is W-10FB3.
Adjustable Roller Lever Adjustable Rod Lever

WLH12 67 max. WLHAL4
17.5 dia. (length: 7) * 60 ±1.5
WL01H12 41.5 ±1.5
13.1
WL01HAL4 3.2 dia. *
54.5 ±1.5
25.4 8
Four, M3.5 Adjustable range: 41.5 ±1.5
12.7 12 .8 13 .1
Adjustable range: M5 (length: 16) 350 to 380
25 to 89 Allen-head 2 5 .4
25.4 M5 (length: 12)
bolt 12 .7
Allen-head
14.7 Four, 5.2+0.2
0 bolt
dia. holes 65
2 5 .4
14 .7
58.7 ±0.2 68.7
Three, M4
(length: 13) Four, 5.2 +0.2
0
dia. holes
5 58.7 ±0.2 6 8 .7
Three, M4
21.6 (length: 13)
JIS B0202 G½ ±1.2 Four, M6
(15.1) 29.2 Depth: 15 min.
(4.9) Effective thread:
30.2 ±0.2 35 5
4 threads min.
40 ±0.7 42 max. 21.6
65.2 ±0.8 JIS B0202 G½ ±1.2 Four, M6
(15.1)
* Stainless sintered roller (4.9) Effective thread: 2 9.2 Depth: 15 mi
30.2 ±0.2
40 ±0.7 4 threads min. 35
Note: The built-in switch for WLH12 is W-10FB3. * Stainless steel rod 42 max.
Rod Spring Lever 7.7 Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all
dimensions.
WLHAL5
WL01HAL5 2.3 dia. *
54 ±1.5
41.5 ±1.5
428.5 ±2 13 .1
25.4
65
12.7
M5 (length: 16)
Allen-head
11 bolt
25.4
14.7
Four, 5.2 +0.2

0
dia. holes
58.7 ±0.2
Three, M4
68.7
OF and RF for WLH12 and WL01H12, with a lever length of
(length: 13)
89 mm.
5
21.6 WLH12, WLA01H12
(15.1) JIS B0202 G½ Four, M6
(4.9)
30.2 ±0.2 Effective thread: ±1.2
2 9.2 Depth: 15 min. OF 4.18 N
* Piano wire 42 max.
RF 0.42 N
Model WLH2 WLH12 *1 WLHL *2 WLHAL4 *3 WLHAL5

Operating characteristics WL01H2 WL01H12 *1 WL01HL *2 WL01HAL4 *3 WL01HAL5
Operating force OF max. 9.81 N 9.81 N 2.84 N 0.98 N 0.90 N
Release force RF min. 0.98 N 0.98 N 0.25 N 0.15 N 0.09 N
Pretravel PT 15° ±5° 15° ±5° 15° ±5° 15° ±5° 15° ±5°
Overtravel OT min. 55° 55° 55° 55° 55°
Movement Differential MD max. 12° 12° 12° 12° 12°
Note: With WLHAL4, WL01HAL4, WLHAL5, and WL01HAL5, the actuator's tare is large, so depending on the installation direction, they may not be properly reset.
Always install so that the actuator is facing downwards.
*1. The operating characteristics of WLH12, and WL01HL12 are measured at the lever length of 38 mm.
*2. The operating characteristics of WLHL, and WL01HL are measured at the rod length of 140 mm.
*3. The operating characteristics of WLHAL4, and WL01HAL4 are measured at the rod length of 380 mm.
31
WL
Overtravel
Side-installation Models ... For all models WL@ indicates a standard-load model and WL01@ indicates a microload model.
Roller Lever 60 max.
53 ±1.5 53 ±1.5
WLCA2-2N 41.5 ±1.5
WLCA2-2 41.5 ±1.5
WL01CA2-2N 40 ±1.5 WL01CA2-2 17.5 dia. (length: 7) *
40 ±1.5
13.1
17.5 dia. (length: 7) * 22
11 13.1 25.4
Four, M3 Four, M3.5 12.7
11.5
38R
38R Two, M5 M5 (length: 12)
(length: 18) Allen-head bolt 25.4
16.1
16.1 M5 (length: 12) (10.8) (126.5)
(126.5) Allen-head bolt
Four, 5.2 +0.2 Four, 5.2 +0.2
0
0 101.8 dia. holes
dia. holes
Two, 5.2 +0.2 58.7 ±0.2 68.7
58.7 ±0.2 0 64 ±0.2
dia. holes Three, M4
(length: 13)
5
5 5 21.6
±0.2 JIS B0202 G½ Four, M6
(15.1) ±1.2
JIS B0202 G½ 23 5 Four, M6 (4.9) Effective thread: 29.2 Depth: 15 min.
(15.1) 21.6 30.2 ±0.2
(4.9) Effective thread: Depth: 15 min. 4 threads min.
30.2 ±0.2 40 ±0.7 35
40 ±0.7 4 threads min. 33 ±1.2
* Stainless sintered roller 42 max.
* Stainless sintered roller 35
53.2 ±0.8
42 max.

60 ±1.5
WLCA12-2N 17.5 dia. (length: 7) * 41.5 ±1.5 WLCA12-2 60 ±1.5
WL01CA12-2N 22 WL01CA12-2 17.5 dia. (length: 7) * 41.5 ±1.5

13.1
11 13.1
Four, M3 25.4
Adjustable range: 11.5 Four, M3.5
12.7
25 to 89 Two, M5 Adjustable range:
(length: 18) 25 to 89 M5 (length: 16)
M5 (length: 16) Allen-head bolt 25.4
16.1 Allen-head bolt (10.8) 16.1 Four, 5.2 +0.2
0
dia. holes
Four, 5.2 +0.2
0 101.8
dia. holes
58.7 ±0.2 64 ±0.2 68.7
58.7 ±0.2
Two, 5.2 +0.2
0
Three, M4
dia. holes (length: 13)
5 Three, M4 5 5
(length: 13) ±0.2
21.6
23 5 Four, M6
(15.1) JIS B0202 G½ 21.6 Four, M6 (15.1) ±1.2
(4.9) Effective thread: Depth: 15 min. (4.9) JIS B0202 G½ 29.2 Depth: 15 min.
30.2 ±0.2 30.2 ±0.2
Effective thread:
40 ±0.7 4 threads min. 33 ±1.2 40 ±0.7 35
4 threads min.
35 * Stainless sintered roller 42 max.
42 max. 65.2 ±0.8
Adjustable Rod Lever 9 3 ±0.2 dia. 55 max. Adjustable Rod Lever 9

55 max.
(length: 160) * 46 ±1.5 46 ±1.5
WLCL-2N M8 (length: 12) 22
WLCL-2 3 ±0.2 dia.
WL01CL-2N Allen-head 11 13.1 WL01CL-2 (length: 160) * 41.5 ±1.5
13.1
Adjustable range: lock screw
11.5 Adjustable range: M8 (length: 12) 25.4
25 to 140 Four, M3
Two, M5 (length: 18) 25 to 140 Four, M3.5 Allen-head 12.7
M5 (length: 12) lock screw
Allen-head bolt M5 (length: 12)
16.1 (10.8) 25.4
Allen-head bolt
16.1
Four, 5.2 +0.2
0
dia. holes 101.8
Two, 5.2 +0.2 Four, 5.2 +0.2
0
0 64 ±0.2
58.7 ±0.2 dia. holes dia. holes
Three, M4 58.7 ±0.2 68.7
(length: 13) Three, M4
(length: 13)
5 5
±0.2
5
23 5 Four, M6
(15.1) JIS B0202 G½ 21.6 JIS B0202 G½ 21.6
(4.9) Effective thread: Depth: 15 min. ±1.2
Four, M6
30.2 ±0.2 (15.1) Effective thread: Depth: 15 min.
40 ±0.7 4 threads min. 33 ±1.2 (4.9) 29.2
35 40 ±0.7 35
* Stainless steel rod 42 max. * Stainless steel rod 42 max.
Model WLCA2-2N WLCA12-2N *1 WLCL-2N *2 WLCA2-2 WLCA12-2 *1 WLCL-2 *2 OF and RF for WLCA12-2N
Operating characteristics WL01CA2-2N WL01CA12-2N *1 WL01CL-2N *2 WL01CA2-2 WL01CA12-2 *1 WL01CL-2 *2 and WL01CA12-2N, with a
Operating force OF max. 9.61 N 9.61 N 2.84 N 8.83 N 8.83 N 2.55 N lever length of 89 mm.
Release force RF min. 1.18 N 1.18 N 0.25 N 0.49 N 0.49 N 0.1 N WLCA12-2N,
Pretravel PT 20° max. 20° max. 20° max. 25° ±5° 25° ±5° 25° ±5° WLA01CA12-2N
Overtravel OT min. 70° 70° 70° 60° 60° 60°
OF 4.10 N
Movement Differential MD max. 10° 10° 10° 16° 16° 16°
RF 0.50 N
*1. The operating characteristics of WLCA12-2N and WL01CA12-2N are measured at the lever length of 38 mm.
*2. The operating characteristics of WLCL-2N and WL01CL-2N are measured at the rod length of 140 mm.
32
WL

Direct-wired Connector/Pre-wired Connector Models
Refer to page 17 for the connecting cable.
Roller Lever Plungers ....... WL@ are Standard Models and WL01@ are Microload Models.
Standard Models (WLCA2), Overtravel General-purpose Models (WLH2)
Connector Models Pre-wired Connector Models 60 max.

60 max. 53 ±1.5
41.5 ±1.5
53 ±1.5 17.5 dia. (length: 7) * 40 ±1.5
13.1
41.5 ±1.5
25.4
40 ±1.5
17.5 dia. (length: 7) * 13.1 Four, M3.5 12.7
38R
25.4
12.7 25.4
Four, M3.5
38R 14.7 M5 (length: 12)
Allen-head bolt
25.4 Four, 5.2 +0.2
M5 (length: 12) 0
14.7 Allen-head bolt dia. holes
58.7 ±0.2 68.7
Four, 5.2 +0.2 Three, M4
0
dia. holes (length: 13)
58.7 ±0.2 68.7 5
Three, M4
(length: 13) (20) Four, M6
5 Depth: 15 min.
12.5
Four, M6 SC-1M
M12 × 1 21.6 Depth: 15 min.
+100
(15.1) ±1.2 300 -50
(4.9) JIS B0202 G½ 29.2
30.2 ±0.2
40 ±0.7 Effective thread: 35
4 threads min. 6 dia.
53.2 ±0.8 21.6
(15.1) XS2H-D421 ±1.2
(4.9)
30.2 ±0.2 29.2
40 ±0.7 M12 × 1 35
42 max.
Note: 1. Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.

2. The models with operation indicators are shown in the above diagrams.
Actuator Standard roller lever Overdrive general-

Operating characteristics actuator purpose actuator
Operating force OF max. 13.34 N 9.81 N
Release force RF min. 2.23 N 0.98 N
Pretravel PT 15° ±5° 15° ±5°
Overtravel OT min. 30° 55°
Movement Differential MD max. 12° 12°
33
WL
Top-roller Plunger (WLD2)

Direct-wired Connector Models Pre-wired Connector Models
13.1
PT 17.5 dia. (length: 4.6) * 12.9
13.1
Four, M3.5 (length: 10)
PT OP 28
17.5 dia. (length: 4.6) * 12.9
Four, 5.2 +0.2

0
Four, M3.5 (length: 10) dia. holes
OP 28
58.7 ±0.2 68.7
Three, M4
(length: 13)
Four, 5.2 +0.2
0
dia. holes 5
58.7 ±0.2 68.7
(20) Four, M6
Three, M4
(length: 13) Depth: 15 min.
5
12.5 SC-1M
21.6 Four, M6 300 +100
M12 × 1 Depth: 15 min.
-50
(15.1) JIS B0202 G½ ±1.2

(4.9) Effective thread: 29.2
30.2 ±0.2
40 ±0.7 4 threads min. 35 6 dia.
* Stainless sintered roller 42 max. 21.6
XS2H-D421 ±1.2
(15.1)
(4.9) 29.2
30.2 ±0.2 35
40 ±0.7 M12 × 1
42 max.

2. The following diagrams are for a indicator-equipped models.
Actuator
Top-roller plunger
Operating characteristics
Operating force OF max. 26.67 N
Release force RF min. 8.92 N
Pretravel PT max. 1.7 mm
Overtravel OT min. 5.6 mm
Movement Differential MD max. 1 mm
Operating Position OP 44 ±0.8mm
Total travel Position TTP max. 39.5 mm
Indicator-equipped Models

53 ±1.5
WLCA2-LE/LD 41.5 ±1.5
WL01CA2-LE/LD 40 ±1.5
17.5 dia. (length: 7) * 13.1
25.4
12.7
Four, M3.5
38R
25.4
14.7 M5 (length: 12)
(125) Allen-head bolt
Four, 5.2 +0.2
0
dia. holes
58.7 ±0.2 68.7
Three, M4
(length: 13)
5
21.6 Four, M6
(15.1) ±1.2
(4.9) JIS B0202 G½ Depth: 15 min.
29.2
30.2 ±0.2 Effective thread:
Actuator WLCA2-LE/LD
Operating characteristics WL01CA2-LE/LD
Operating force OF max. 13.34 N
Release force RF min. 2.23 N
Pretravel PT 15° ±5°
Overtravel OT min. 30°
Movement Differential MD max. 12°
34
WL
Spatter-prevention Models
Roller Lever (Screw Terminals) Roller Lever (Pre-wired connectors)

WLCA2-@S/WL01@-@S WLCA2-@S-M1J*/WL01@-@S-M1J*
WLH2-@S WLH2-@S-M1J*
* External dimensions are the same even for different core
wires.
60 max.
53 ±1.5
60 max. 41.5 ±1.5
17.5 dia. (length: 7) * 40 ±1.5
17.5 dia. (length: 7) * 54 ±1.5 13.1
13.1
Four, M3.5 Four, M3.5 25.4
head clamping screws 25.4 head clamping screws
12.7
12.7 38R Two, M5 Allen-head nut
Two, M5 Allen-head nut and arm set screw
38R
and arm set screw
Four, 5.2 +0.2 25.4
0
Four, 5.2 +0.2 25.4 14.7 dia. holes
0
14.7 dia. holes
(125) Fluororesin cap Fluororesin cap
58.7 ±0.2 Three, M4 68.7

58.7 ±0.2 68.7 (length: 13)
Lamp cover Lamp cover
5
5 Three, M4 (20) Four, M6
(length: 13) 21.6
±1.2 Four, M6 Depth: 15 min.
(15.1) JIS B0202 G½
(4.9) 29.2 Depth: 15 min.
30.2 ±0.2 Effective thread: SC-1M
40 ±0.7 35
4 threads min.
42 max. 300 +100
−50
* Stainless steel roller
6 dia.
21.6
(15.1) XS2H-D421 ±1.2
(4.9)
30.2 ±0.2 29.2
40 ±0.7 35
42 max.
* Stainless steel roller 53.2 ±0.8
Sealed Top-roller Plunger (Screw Terminals) Sealed Top-roller Plunger (Pre-wired connectors)
WLD28-@S WLD28-@S-M1J*
* External dimensions are the same even for different core wires.
11.2 dia. (length: 5) * 13.1

PT
Rubber cap 12.9
13.1 (Fluorosilicone)
Four, M3.5 (length: 10)
PT 12.9 Mounting bushing
11.2 dia. (length: 5) * OP
Tightening screws
and spring washers
Four, M3.5
OP 24 Four, 5.2 +0.2
0
Four, 5.2 +0.2
0 dia. holes
dia. holes 58.7 ±0.2 68.7
Three, M4
(length: 13)
Lamp cover
58.7 ±0.2 68.7 5
Lamp cover (20) Four, M6
Depth: 15 min.
5 Three, M4
(length: 13) 21.6 SC-1M
±1.2 Four, M6
(15.1) JIS B0202 G½ 300 +100
(4.9) 29.2 Depth: 15 min. −50
30.2 ±0.2 Effective thread:
42 max. 6 dia.
* Stainless steel roller
21.6
(15.1) XS2H-D421 ±1.2
(4.9)
30.2 ±0.2 29.2
40 ±0.7 35
* Stainless steel roller 42 max.
Actuator Roller Lever

Sealed Top-roller
Overtravel models
Basic Plunger
Operating characteristics General-purpose
Operating force OF max. 13.34 N 9.81 N 16.67 N
Release force RF min. 2.23 N 0.98 N 4.41 N
Pretravel PT 15° ±5° 15° ±5° 1.7 mm max.
Overtravel OT min. 30° 55° 5.6 mm
Movement Differential MD max. 12° 12° 1 mm
Operating Position OP — — 44 ±0.8 mm
Total travel Position TTP max. — — 39.5 mm
35
WL
Long-life Models
Rotating Lever Models
Roller Lever (Screw Terminals) Roller Lever (Direct-wired Connectors)
60 max. 60 max.
WLM@-LD 53 ±1.5 WLM@-LD@ 53 ±1.5
41.5 ±1.5 41.5 ±1.5
40 ±1.5 40 ±1.5
17.5 dia. (length: 7) * 13.1 17.5 dia. (length: 7) * 13.1
Four, M3.5 25.4 Four, M3.5 25.4
(length: 26.5) 12.7 (length: 26.5) 12.7
38R M5 (length: 12) 38R M5 (length: 12)
Allen-head bolt Allen-head bolt
25.4 Four, 5.2 +0.2 25.4
Four, 5.2 +0.2
0 0
14.7 dia. holes 14.7 dia. holes
Rubber cap Rubber cap

58.7 ±0.2 68.7 58.7 ±0.2 Three, M4 68.7
Three, M4
(length: 13) (length: 13)
5 Lamp cover 5 Lamp cover

21.6 12.5
±1.2
Four, M6 Four, M6
(15.1) SC-2FD 21.6 Depth: 15 min.
(4.9) 29.2 Depth: 15 min.
30.2 ±0.2 (15.1) ±1.2
40 ±0.7 JIS B0202 G½ 35 (4.9) 29.2
Effective thread: 30.2 ±0.2 M12 x 1
* Stainless sintered roller 4 threads min. 42 max. 40 ±0.7 35
JIS B0202 G½
53.2 ±0.8 * Stainless sintered roller Effective thread: 42 max.
4 threads min. 53.2 ±0.8
Roller Lever (Pre-wired Connectors) Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all
WLM@-LD@ 60 max.
dimensions.
53 ±1.5
41.5 ±1.5
17.5 dia. (length: 7) * 40 ±1.5
13.1
Four, M3.5
(length: 26.5) 25.4
12.7
38R M5 (length: 12)
Allen-head bolt
Four, 5.2 +0.2
0
25.4
14.7 dia. holes
Rubber cap
58.7 ±0.2 Three, M4 68.7

(length: 13)
Lamp cover
(20) 5 Four, M6
XS2H-D421 Depth: 15 min.
300 ±50
44.7
6 dia.
21.6
(15.1) ±1.2
(4.9)
30.2 ±0.2 29.2
40 ±0.7 35
42 max.
Model WLMH2-LD@
WLMCA2-LD@
General-purpose
Basic models
Operating characteristics overtravel models
Operating force OF max. 9.81 N 9.81 N
Release force RF min. 0.98 N 0.98 N
Pretravel PT 15° ±5° 15° ±5°
Overtravel OT min. 30° 55°
Movement Differential MD max. 12° 12°
36
WL
Actuators (Levers Only)

Lever: Only rotating lever models are illustrated.
WL-1A100 WL-1A115 WL-1A400 WL-1A118
Standard Lever Resin Roller Bearing Roller Nylon Roller:
Roller Width: 30 mm
17.5 dia. (length: 7) 17.9 17.9 16.9 17.5 dia. (length: 30) 40.2 ±0.8
17.5 dia. (length: 7) 17 dia. (length: 6)
stainless sintered roller 12.1 Nylon roller
12.6 resin roller 12.6 bearing roller 23.6
7.3-dia. 7.3-dia. 7.3-dia.

mounting mounting R38
mounting 54.8
holes 38 54.8 holes 38 54.8 holes 38 54.8
7.3-dia.
mounting M5
M5 M5 M5 holes 16
16 16 Allen-head bolt 11.4 16 Allen-head bolt 11.4 Allen-head bolt 11.4
Allen-head bolt 11.4
WL-1A105 WL-1A103S WL-1A200 WL-1A300

Double Nuts Spatter Prevention Lever Length: 50 Lever Length: 63
17.5 dia. (length: 7) 17.9 17.5 dia. (length: 7) 17.9 Roller Width: 15 17.5 dia. (length: 7) 17.9
stainless sintered roller 12.6 stainless steel roller 12.6 stainless sintered roller 12.6
17.5 dia. (length: 15) 25.7
stainless sintered roller 16.6
7.3-dia. 7.3-dia.
mounting mounting
holes 38 54.8 holes 38 ±0.2 54.8
7.3-dia. 7.3-dia. 63 ±0.3 79.8
mounting 50 66.8
mounting
holes holes
Two, M5 Allen- M5
16 head nut and 16 Allen-head bolt 11.4
11.4
arm set screw
M5 M5
16 Allen-head bolt 11.4 16 Allen-head bolt 11.4
WL-2A100 WL-2A111 WL-2A107 WL-2A108

Resin Roller Double Nuts Resin Roller
24.9 ±0.8 24.9 ±0.8 17.5 dia. (length: 7) 24.9 ±0.8
17.5 dia. (length: 7) 17.5 dia. (length: 7) stainless sintered M5 24.9 ±0.8 M5
19.7 ±0.8 resin roller 19.7 ±0.8 17.5 dia. (length: 7) Allen-head 19.7 ±0.8
stainless sintered roller roller Allen-head 19.7 ±0.8
Adjustable lever: resin roller bolt
Adjustable lever: Adjustable lever: bolt Adjustable lever:
stainless steel
stainless steel stainless steel stainless steel
23
Adjustable Adjustable
Adjustable 23
range: Adjustable range:
range: 25 to 140
25 to 89 range:
25 to 89
105.75 25 to 89
105.75
105.75
7.3-dia. 7.3-dia. 155.75
7.3-dia. 7.3-dia.
mounting mounting
mounting mounting
holes holes
holes M5 holes
M5
Allen-head Allen-head
bolt bolt
12 Two, M5 Allen-head nut
12
16 12
16 and arm set screw
16
6.2
(15.8)
WL-2A122 WL-2A106 WL-2A130 WL-2A104

17.5 dia. (length: 7) 24.9 ±0.8
stainless sintered 24.7 ±0.8 24.9 ±0.8
17.5 dia. (length: 7) M5 24.9 ±0.8 19.7 ±0.8
roller 17.5 dia. (length: 7) 19.5 ±0.8 50 dia. (length: 6) 19.7 ±0.8
stainless sintered Allen-head 19.7 ±0.8 9.1 Nylon roller
roller Adjustable lever: stainless sintered
bolt 3
Adjustable lever: stainless steel roller
stainless steel
23 (21.8)
Adjustable 23
range: Adjustable (10)
25 to 140 range: 89.5R
25 to 89 (10) Adjustable
from 42 to 89
7.3-dia. 105.75
mounting (112) Three, 5.3+0.2
0
155.75 dia. holes
holes
7.3-dia.
7.3 dia.
mounting mounting holes
M5 7.3-dia. M5
holes
Allen-head mounting Allen-head
bolt holes bolt
Two, M5
(length: 16)
16 15.9
* Can be installed Allen-head bolt
20 22.1 12 23
on the rear side. 20
16
6.2
(15.8)
37
WL
Lever: Only rotating lever models are illustrated.

WL-2A110 WL-2A105 34.2 WL-1A106 WL-1A110
50 dia. (length: 15) 34.5 49 dia. rubber roller 24.2
Nylon roller 24.4 Material: NBR 6 50 dia. (length: 6) 20.1 ±0.8
Nylon roller 35 dia. (length: 6) 20.1 ±0.8
Nylon roller
38R
Adjustable 23 Adjustable 38R
122
from 41 to from 41 to
78.5 89
M5 M5
7.3-dia. 7.3+0.1
Allen-head Allen-head 16 0 -dia.
bolt 16 mounting mounting holes 11.5
holes 11.5 bolt
M5
7.3-dia. Allen-head 7.3-dia. M5
mounting bolt mounting Allen-head
holes holes bolt
16 16
WL-4A100 WL-4A201 WL-3A100 WL-3A106

3.2-dia.
Double Nut
9 9 stainless 3.2-dia.
2-dia. stainless steel rod stainless
3-dia. stainless steel for spring steel rod
steel rod
7.3-dia. mounting Adjustable
holes from 350 Adjustable
13 7.3-dia.
Adjustable M5 Adjustable to 380 8 from 350
mounting
from Allen-head from 270 to holes 400 ±2 to 380 8
25 to 140 bolt 290
M5 400 ±2
160
Allen-head
19 Actuator's
bolt
center of
11 65 ±2
rotation
M8 7.5
M8 6 11 65 ±2
Allen-head
Allen-head 7.5
lock screw 6
lock screw
11 7.3-dia.
M5
mounting 13.4
11 12.8 Allen-head 7.3-dia. Two, M5 Allen-
holes
bolt mounting head nut and 13.4
25.5 max. 12.8
holes arm set screw
25.5 max.
WL-3A108 WL-3A200 WL-3A203 WL-4A112

3.2-dia. 8 dia.
stainless 2.3-dia.
operation rod 9
steel rod Cap
50 4-dia. stainless
steel rod
Adjustable 7.3-dia.
from 650 417.5 ±2 mounting holes
to 660 8 ±0.4 Adjustable M5
437.5 ±2 Adhesive
680 450 ±4 up to 141 Allen-head
12.5 dia. max. 470 ±4 bolt
2.3-dia. 12.5 160
(95) operation dia. 19
11 65 ±2 rod max.
7.5 11 (95) M8
6 7.5 Allen-head
6 11 lock screw
7.5
7.3-dia. 7.3-dia. M5 6
M5
mounting 13.4 mounting 7.5 Allen-head 13
12.8 Allen-head 11
holes holes bolt 7.3-dia. M5
bolt 25.5 max. 24.6 max. mounting Allen-head 13
holes bolt
24.6 max.
WL-2A129 15.8
WL-5A101 WL-5A103 WL-5A105
Marking 3
8R
Two, 17.5 dia. (length: 7) Two, 17.5 dia. (length: 7) Two, 17.5 dia. (length: 7)
17.7 17.7 6.7 17.7
(18.5) stainless sintered rollers 6.7 stainless sintered rollers stainless sintered rollers
12.4 12.4 12.4
1.3 1.3
90° 90°
Three, 5.3 +0.2
0 90°
84 dia. holes
95.3 7.3 dia. 7.3 dia. 7.3 dia.
38R 38R 38R
(108) 54.8 54.8 54.8
7.3 +0.1
0 dia.
10 mounting
holes
10
11.3 M5 (length: 16) M5 (length: 16) M5 (length: 16)
Allen-head bolt 11 Allen-head bolt 11 Allen-head bolt 11
15.9 Two,M5
(length: 16) 22.1
20 Allen-head bolts WL-5A100 has a plastic roller WL-5A102 has a plastic roller WL-5A104 has a plastic roller

2. When using the adjustable roller (rod) lever, make sure that the lever is facing downwards. Use caution, as telegraphing (the Switch turns ON and OFF
repeatedly due to inertia) may occur.
38
WL
Safety Precautions
Refer to Safety Precautions for All Limit Switches.
Using Switches for Micro Loads
Precautions for Safe Use
Contact faults may occur if a Switch for a general-load is used to
• When a rod or wired-type actuator is used, do not touch the top end switch a micro load circuit. Use switches in the ranges shown in the
of the actuator. Doing so may result in injury. diagram below. However, even when using micro load models within
(Applicable models) the operating range shown here, if inrush current occurs when the
WLHAL5 and WL01HAL5 Rod Spring Levers and WLNJ-S2 and contact is opened or closed, it may increase contact wear and so
WL01NJ-S2 Steel-wire Actuators. decrease durability. Therefore, insert a contact protection circuit
• A short-circuit may cause damage to the Switch, so insert a circuit where necessary. The minimum applicable load is the N-level
breaker fuse, of 1.5 to 2 times the rated current, in series with the reference value. This value indicates the malfunction reference level
Switch. for the reliability level of 60% (λ60).
• In order to meet EN approval ratings, use a 10-A fuse that The equation, λ60 = 0.5 × 10–6/operations indicates that the estimated
corresponds to IEC60269, either a gI or gG for general-purpose malfunction rate is less than 1/2,000,000 operations with a reliability
types and spatter-prevention models only. level of 60%.
Voltage (V)
5 mW 800 mW
Precautions for Correct Use 0.16 mA 26 mA
30
• When wiring terminal screws, use M4 round crimp terminals and
tighten screws to the recommended torque. Wiring with bare wires, 24
or incorrect crimp terminals, or not tightening screws to the Operating range
for standard
recommended torque can lead to short-circuits, leakage current, Operating range models
and fire. for micro-load
models
• When performing internal wiring there is a chance of short-circuit,
leakage current, or fire, so be sure to protect the inside of the 12
Switch from splashes of oil or water, corrosive gases, and cutting Unusable
powder. range
• Using an inappropriate connector or assembling Switches 5

1 mA 100 mA 160 mA
incorrectly (assembly, tightening torque) can result in malfunction,
0
leakage current, or fire, so be sure to read the instruction manual 0.1 1 10 100 1,000
thoroughly beforehand. Current (mA)
• Even when the connector is assembled and set correctly, the end
of the cable and the inside of the Switch may come in contact. This
can lead to malfunction, leakage current, or fire, so be sure to
protect the end of the cable from splashes of oil or water and
corrosive gases.
Operating Environment
• Seal material may deteriorate if a Switch is used outdoor or where
subject to special cutting oils, solvents, or chemicals. Always
appraise performance under actual application conditions and set
suitable maintenance and replacement periods.
• Install Switches where they will not be directly subject to cutting
chips, dust, or dirt. The Actuator and Switch must also be protected
from the accumulation of cutting chips or sludge.
Not Suitable Suitable
• Constantly subjecting a Switch to vibration or shock can result in

wear, which can lead to contact interference with contacts,
operation failure, reduced durability, and other problems.
Excessive vibration or shock can lead to false contact operation or
damage. Install Switches in locations not subject to shock and
vibration and in orientations that will not produce resonance.
• The Switches have physical contacts. Using them in environments
containing silicon gas will result in the formation of silicon oxide
(SiO2) due to arc energy. If silicon oxide accumulates on the
contacts, contact interference can occur. If silicon oil, silicon filling
agents, silicon cables, or other silicon products are present near the
Switch, suppress arcing with contact protective circuits (surge
killers) or remove the source of silicon gas.
39
WL
Built-in Switch Connectors

Do not remove or replace the built-in switch. If the position of the built- Either the easy-to-use Allen-head nut or the SC Connector can be
in switch moves, it can cause reduced performance, and if the used as connectors. To ensure high-sealing properties, use the SC
insulation sheet moves (separator), the insulation may become Connector. Refer to Limit Switch Connectors for details on SC
ineffective. Connectors.
Tightening Torque Wiring

• If screws are too loose they can lead to an early malfunction of the • Use 1.25-mm2 lead wires and M4-insulation covered crimp
Switch, so ensure that all screws are tightened using the correct terminals for wiring.
torque.
Crimp Terminal External Wiring Method
• In particular, when changing the direction of the Head, make sure
Dimensions Switch Box Section
that all screws are tightened again to the correct torque. Do not
allow foreign objects to fall into the Switch. L Ground terminal
l F
Appropriate
No. Type tightening
1. torque D dia. B
3. Head mounting
1. 0.78 to 0.88 N·m dz dia. : 4.3
screw
D dia. : 4.5
6. Cover mounting dz dia.
2. 1.18 to 1.37 N·m B : 8.5 NO terminal
screw L : 21.0
4. Allen-head bolt F : 7.8
3. (for securing the 4.90 to 5.88 N·m l : 9.0 (mm) NC terminal
lever)
• The ground terminal is only installed on models with ground
2. 4. Terminal screw 0.59 to 0.78 N·m
terminals.
5. 5. Connector 1.77 to 2.16 N·m
Rotating Lever Set Position (General-purpose or Spatter-
Installing the Switch prevention Switches Only)
To install the Switch, make a mounting panel, as shown in the All rotating lever models, except the fork lever lock models, have a set
following diagram, and tighten screws using the correct torque. position marker plate. (See page 23.) After operation, set the indicator
Mounting needle on the marker plate so that is in the convex section of the
Mounting bearing.
Mounting
WL
locations
Operation Set Position (Long-life Switches Only)
For all Long-life Switching, there is a set position marker slit on the
rubber cap of the head. After operation, set the slit on the rubber cap
Front Mountig : Four, 5.2 +0.2
0 dia. holes
or M5 tapped holes so that the fluorescent color on the shaft section can be seen.
Rear Mountig : Four, 6.2 +0.2
0 dia. holes
Terminal Plate
Front Mountig/ By using a short circuit plate, as shown in the following diagram, the
Rear Mountig
58.7 ±0.15 Switch can be fabricated into a single-polarity double-break switch.
When ordering, specify WL Terminal Plate (product code: WL-
9662F).
30.2 ±0.15 9
2.5 +0.2
0 7.1
In case of side mounting for Mounting
overtravel,90° WL@-@@2N locations
3R
9 ±0.2 COM 16 ±0.15 23 ±0.4
Two, 5.2 +0.2
0 dia. holes 7 2R
Side Mountig 2.1R 3.5

64 ±0.15
4.2 +0.1
0
t = 0.6 Brass plate
Indicator
23 ±0.15 Indicator-equipped switch has contacts and indicator in parallel.
When contacts are open, leakage current flows through the indicator
circuit and may cause load's malfunction.
Please check the load's OFF current before use the indicator-
equipped switch.
40
WL
Using the Switches

Item Applicable models and Actuators Details
Changing the Installation Position
of the Actuator Roller Levers:
By loosening the Allen-head bolt on the WLCA2, WL01CA2, WLCA2-2,
WL01CA2-2, WLH2, WL01H2, Loosen the M5 × 12 bolt, set
actuator lever, the position of the actua- the actuator's position and then
tor can be set anywhere within the 360°. WLMCA2@, WLMH2@ tighten the bolt again.
With Indicator-equipped Switches, the Adjustable Roller Levers:
actuator lever comes in contact with the WLCA12, WL01CA12, WLCA12-2,
top of the indicator cover, so use caution WL01CA12-2, WLH12, WL01H12
when rotating and setting the lever. Adjustable Rod Levers:
When the lever only moves forwards and WLCL, WL01CL, WLCL-2, WL01CL-2,
backwards, it will not contact the lamp WLHL, WL01HL
cover (except for long-life models).
Changing the Orientation of the Head Roller Levers:

By removing the screws in the four cor- WLCA@, WL01CA@, WLCA@-2, Head
ners of the Head, the Head can be set WL01CA@-2, WLH@, WL01H@, Head Loosen the screws.
in any of the four directions. Be sure to WLMCA2@, WLMH2@ Loosen the screws.
change the plunger for internal opera- Adjustable Rod Levers:
tions at the same time. (The operation- WLCL, WL01CL, WLCL-2, WL01CL-2
al plunger does not need to be Horizontal Plungers:
changed on general-purpose overtrav- WLSD@, WL01SD@
el models.) The roller plunger can be Top-roller Plungers:
set in either two positions at 90°. WLD2, WL01D2
WLCA2-2N and WL01CA2-2N can be Sealed Top-roller Plungers:
set only in either the forward or back- WLD28, WL01D28
ward direction. Does not include -RP60 Series or -141
Series.
One-side Operation for General-purpose Switches
The output of the Switch will be The output of the Switch will
changed, regardless of which only be changed when the lever
direction the lever is pushed. is pushed in one direction.
Operating Operating Not operating Operating Operating Not operating
Operational
plunger
Operation in both Clockwise operation Counterclockwise

directions operation
Changing the Operating Direction Cam Direction Changing Procedure for Overtravel, 90° Operation Switches
By removing the Head on models Loosen the cam holder with a Change the direction of the cam as
which can operate on one-side only, coin or screwdriver. Take out required by your intended operation
and then changing the direction of the Roller Levers: the cam from the Switch. and then reinstall the cam.
operational plunger, one of three oper- WLCA2, WL01CA2
ating directions can be selected. For Adjustable Roller Levers:
overtravel 90° operation models, one WLCA12, WL01CA12
of three operating directions can be se- Adjustable Rod Levers:
lected by loosening the rubber holder WLCL, WL01CL
using either a coin or a flat-blade Overtravel Models:
screwdriver and changing the direction WLCA@-2N, WL01CA@-2N
of the internal rubber section.
The tightening torque for the screws on
the Head is 0.78 to 0.88 N•m.
Relationship of cam to operation as observed from the rear of Switch

Operation on both sides Operation on one side
Operates Operates Operates Does not operate
Operation on one side Avoid this combination
Does not Operates

operate
41
WL
Item Applicable models and Actuators Details
Roller Levers:
Installing the Roller on the Inside
WLCA@, WL01CA@, WLH@, WL-
By installing the roller lever in the op- CA@-2, WL01CA@-2, WLMCA2@,
posite direction, the roller can be in- WLMH2@ except for the adjustable
stalled on the inside. (Set so that roller levers.
operation can be completed within a Fork Lever Locks: Loosen the
180° level range.) WLCA32-4@, WL01CA32-4@
Allen-head bolt.
WLCA32-41 WLCA32-43
Selecting the Roller Position

There are four types of fork lever lock Fork Lever Locks:
for use depending on the roller posi- WLCA32-4@, WL01CA32-4@ WLCA32-42 WLCA32-44
tion.
Note: An explanation of the operation of fork lever locks is provided after

this table.
WLCA12 etc.
Loosen this
Adjustment range radius: Allen-head bolt
Adjusting the Length of the Rod or 25 to 89 mm and adjust the
Adjustable Roller Levers:
Lever Loosen this length of the rod.
WLCA12, WL01CA12 etc. Allen-head bolt
The length of the rod or lever can be Adjustable Rod Levers: and adjust the
adjusted by loosening the Allen-head WLCL, WL01CL, etc. length of the
bolt. lever.
Operation of Fork Lever Locks

The fork lever lock is configured so that the dog pushes the lever to reverse the output and this reversed state is maintained even after
the dog continues on. If the dog then pushes the lever from the opposite direction, the lever will return to its original position.
Example
NC terminal: ON NO terminal: ON NO terminal: ON
42
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.

Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
2020.8
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2020 All Right Reserved.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Omron:
WLCL-2N WLRCA2-2N WLSD-TS WLCA2-2N WLGL-LD-N WLCL-2N-N WLCA12-RP WLSD3-KGM JPN

WL Ds e 18 1 csm582-2308360

Uploaded by

Copyright:

Available Formats

WL Ds e 18 1 csm582-2308360

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

WL Ds e 18 1 csm582-2308360

Uploaded by

Copyright:

Available Formats

Two-circuit Limit Switch

Wide Range of Two-circuit

Be sure to read Safety Precautions on page 39 to 42 and

Sensor I/O connectors WL@-@LDK@

Selection Points WL@-TH

• Overtravel is large, making 80° 80°

• Overtravel is large, making Not possible Any of

Connectors and Conduits

The WL Series consists of four basic types: General-purpose, En-

According to Operating Environment

−10°C +80°C WL@ General-purpose

Rubber parts are made from silicone rubber, which has a

Spattering from To prevent spatter during welding, a heat-resistant resin is used

According to Application Conditions

10 A at 125,250, or 500 VAC WL@ General-purpose Switches

Mechanical: 15 million operation min.

Long-life Mechanical: 30 million operation min. WLM@ Long-life Switches

According to Ease of Installation and Maintenance

with molded terminals.)

Screw terminals. No ground terminal. WL@ General-purpose Switches

Direct-wired connector, 2-conductor. WL@-@LDK13

According to Form of Operation

WLMCA2 Long-life Switches

workpieces ● One-Horizontal operation possible.

Dogs or workpieces 350 to 380

427.5 ● One-Horizontal operation not

● Head mounts in any of 4 directions.

● Head mounts in any of 4 directions. WLCA32-41 Fork Lever Lock Actuator

● Head mounts in any of 4 directions. WLCA32-42 Fork Lever Lock Actuator

● Head mounts in any of 4 directions. WLCA32-44 Fork Lever Lock Actuator

WLD Top Plunger Actuator

● Head mounts in any of 4 directions. WLSD Horizontal Plunger Actuator

Cams or WLD3 Top-ball Plunger Actuator

WLSD2 Horizontal-roller Plunger Actuator

Positioning on Production Lines Positioning of Machine Tools

Positioning on Suspended Conveyors Pallet Detection in Arc Welding Lines

Multilevel Car Parking Towers Limit Detection is Transport Systems

(1) Electrical Rating (2) Actuator and Head Specifications

General-purpose Switches Direct-wired Connector Pre-wired Connector

Sensor I/O Connector Switches

(1) Electrical Rating

(2) Actuator Type (5) Wiring Specifications

Spatter-prevention Switches Long-life Switches

WL @ @-@ @ S @ WLM @ -LD @

(1) Electrical Rating (1) Actuator

Note: Dimensions are the same for both LE and LD models.

(5) Wiring Specifications

Item Model Model Model

Actuator Adjustable roller Adjustable rod lever Adjustable rod lever

Actuator Horizontal-roller Horizontal-ball

Actuator Adjustable rod lever Adjustable rod lever

Actuator Horizontal-roller Horizontal-ball

Sensor I/O Connector Switches

Item Model Model Model

Actuator Horizontal-roller Coil spring (spring Coil spring (resin rod

Double nut lever Allen-head lever

Item Model Model Model

Roller lever, screw

Model WLCA2 WLCA2-7 WLCA2-8 WLCA12 1 WLCL 2 Model WLCA32-41 to 44 *1

Model WLH2 WLH12 1 WLHL 2 WLHAL4 *3 WLHAL5