FABRICATION MATERIALS

N PT
NO COMPONENT DESCRIPTION
N.S.
(INS) ITEM CODE QTY WEIGHT
PIPE

1 NPS:20-PN20-PIPE - PE ENDS - <MFR Std - 20 AAQ38 23.300 M 722.4

Plastic>-RTR-EPOXY

FITTINGS

CONT. ON 2 NPS:20x6-TEE - PE ENDS - <MFR Std - 20X6 FF23O 1 40.0

Plastic>-PN20-RTR-EPOXY
082-WF-31232/L74 DesArea:
E 1880.749M L74M35 SUPPORTS
N 5135.454M DesArea: 3 SADDLE FOR GRE/GPR PIPES 1"-76" NPS 20 Y1-20 4 -
EL +10.034M L73M34 4 GUIDE ON SADDLE FOR HORIZONTAL INSULATED PIPES 20 G2 2 5.2
1/2" - 80" NPS

TOTAL FABRICATION WEIGHT 767.6

10
5

62
<3> 1

5
S3
88.8°
Y1_DIA_20-1-305
7
51 4 Y1-20-20

<2> 1 S3
Y1_DIA_20-1-306
Y1-20-20

082-WF-31232/L73-S01
S4

60
00
G2_DIA_20-80-1-4153 DesArea:
G2-20 L04I01
DesArea:
L73M34

12
35
6000

0
415

2
3

49
23 S3

75
99
5 Y1_DIA_20-1-308
2
Y1-20-20
20X6"NS
1

10
25
S3 DesArea:
<1> 1
Y1_DIA_20-1-307 L73M34
Y1-20-20 DesArea:
L72M33

CONT. ON
082-WF-31231/L04
E 1880.254M
N 5112.485M S4 40 CONT. ON
0
EL +10.449M G2_DIA_20-80-1-4557 082-WF-31232/L72
E 1880.232M
G2-20
N 5111.460M
EL +10.034M

20
"N
S

CUT PIPE LENGTH

POS. ITEM SIZE LENGTH END 1 END 2 POS. ITEM SIZE LENGTH END 1 END 2
NO CODE (INS) (MM) NO CODE (INS) (MM)

<1> AAQ38 20" 675

<2> AAQ38 20" 12000
<3> AAQ38 20" 10625
WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY

1 20" B-SP SHOP

2 6" B-SP FIELD
3 20" B-SP SHOP
4 20" B-SP SHOP
5 20" B-SP FIELD

REMARKS:
SPOOL TABLE

ALL RIGHT RESERVED

LEGEND :
THIS DOCUMENT AND ANY DATA AND INFORMATION CONTAINED THEREIN ARE CONFIDENTIAL AND PROPERTY BP BERAU LTD. AND COPYRIGHT THEREIN IS VESTED
BP BERAU LTD. NO PART OF THIS DOCUMENT, DATA, INFORMATION SHALL BE DISCLOSED TO OTHERS OR REPRODUCED IN ANY MANNER OR USED FOR ANY PURPOSE
WHATSOEVER, EXCEPT WITH THE PRIOR WRITTEN PERMISSION OF BP BERAU LTD.

BUTT WELD
TANGGUH EXPANSION PROJECT
NOTES: @BP p.l.c.
SOCKET WELD
082-WF-31232/L73-S01 60 3 767.43 38.521656 SECURITY CLASSIFICATION
1. ALL DIMENSION, COORDINATES AND ELEVATIONS ARE IN MILLIMETER UNLESS NOTED bp
OTHERWISE TOTAL FABRICATION 767.6 BP INTERNAL
60 3
2. ALL DIMENSION ARE TO CENTER LINE OR FACE OF FLANGES UNLESS NOTED OTHERWISE
JOB NO.
3. FIELD WELDINGS FOR INSTALLATION TO BE DEFINED BY CONSTRUCTION TOTAL ERECTION 26 2 0.0 SCREWED
4. HANDWHEELS OR LEVER ORIENTATION FOR VALVE TO BE CHECKED AT INSTALLATION
SPOOL CODE NR. OF WELDS WEIGHT (Kg) PAINT/INS (sq.m) C01A 03/08/2018 ISSUED FOR CONSTRUCTION 870310
5. NO MODIFICATION FOR CRITICAL LINES WITHOUT PRIOR APPROVAL JVB DYT FAJ
6. IN CASE OF DISCREPANCY BETWEEN THE LINE LIST AND DATA SHOWN ON ISO, LINE LIST REV. TITLE
OPER. DES. OPER. TEST DATE DRAWN CHKD. APPD K: FABRICATION F: ERECTION SCALE
DES. DESCRIPTION
SHALL BE DOMINANT
NPS Piping Insul. Insul. Thk. TEMP. TEST PAINT
No. PIPING ISOMETRIC
TEMP. PRESS. PRESS. PRESS. NDT
7. IN CASE OF DISCREPANCY BETWEEN THE TEST BLOCK DIAGRAM AND "TEST FLUID" OR PWHT
(Inch) Class Type (mm) (°C) (Kg/Cm2G) (Kg/Cm2G)(Kg/Cm2G) FLUID CODE CODE N.T.S.
"TEST PRESS." SHOWN ON ISO, TEST BLOCK DIAGRAM SHALL BE DOMINANT. (°C)
X SHOP WELD 082-WF-31232/L73 (Sht 1of 1 )

082-WF-31232_L73-C01A_001.DWG
DOCUMENT CLASS COMPANY DRAWING NUMBER
X FIELD WELD
REFERENCE DRAWING:
PIPING FABRICATION DRAWING NUMBER 3
- PWHT : - COORDINATE SYSTEM:
TEP-900-ISO-PP-BP4-0004
STRESS CALC. NR. PIPING GA DRAWING P&ID N. <1> DENOTES PIPE PIECE NR.
LE NO:

TEP-900-PRC-PP-BP4-0001 TEP-930-PRC-IM-BP4-0007 CONTRACTOR DRAWING NUMBER

LE NOS:

UNIT SIZE REV. NO.

- PAINT CODE : - NDT CODE :

DEFAULTS FI

1 DENOTES PARTS LIST NR.

C01
M ODEL FI

TEP-900-SPE-PP-BP4-1009 TEP-900-PRC-PP-BP4-0001 A3
20 12FE0F3 NI 0 60.00 43.00 14.50 11.34 21.75 H N/A NO NO 100-001-2 082-PID-0011-001 082 870310-PTS-900-PIP-BOK-66000

EXTRACTION DATE:

EXTRACTION TIME:
#IPLOT_spm_csdms_organization#spooling#
#IPLOT_object_name#082-WF-31232/L73# #IPLOT_spm_unit_number#082# #IPLOT_spm_fluid#WF# #IPLOT_spm_line_serial_number#31232# #IPLOT_spm_rev_code#C01# #IPLOT_spm_piping_specification#12FE0F3# #IPLOT_spm_project#870310# #IPLOT_spm_csdms_remarks## #IPLOT_spm_fab_rev_code#C01A#