Dokumen - Tips - DCM Aerospace Tooling Gse Catalogue 2016

Download as pdf or txt
Download as pdf or txt
You are on page 1of 88

890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2

Phone: +1-450-435-9210
E-Mail: [email protected]

Copyright 2016, DCM Aerospace, All Rights reserved


1
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Index
Aircraft Maintenance Tooling and GSE
DCM Aerospace is a global aerospace Integrator with a manufacturing facility in Canada. With state-of-the-art integrated software,
DCM Aerospace designs, develops and manufactures critical and high performance aerospace structural components as well as high lev-
el equipments that includes special engine stands and engine removal systems, wing and landing gear components, and related tooling
that meets the stringent requirements of the aerospace industry.

Authorized manufacturer for Bombardier Aerospace and licensed by Boeing Commercial Airplanes for proprietary aircraft Maintenance
tooling & GSE used on CRJ Series Aircraft, Q-Series turboprops, business aircraft, amphibious aircraft, all Airbus, Boeing, Douglas,
Embraer Phenom 300 and holds various approvals for manufacturing aircraft parts and sub-assemblies.

PRODUCT Page PRODUCT Page


TIME LIMITS & MAINTENANCE CHECKS (ATA-5) SERVICING (ATA-12)

Loop Resistance tester & Loop Controller 5 Lavatory & Potable Water 25
Air Flow Cup 7 Nitrogen & Oxygen 25
NATO Cases 26
LIFTING & SHORING (ATA-7) STANDARD PRACTICES AIRFRAME (ATA-20)

Adapters , Jacking Pad aircraft 8 Grommet & O Ring Installation Tool 27


Aircraft Jacking Equipment 9 Cutting Tool 27
Axle Jack 10 Swaging Tool Kit 27
Tripod Jack & Safety Tail 12 Digital Protractor 28
Gaseous Test Panel 28
I/R of NAS5454 Tab Washer and Hardware 29
Boom Hoist - 400 Lbs Capacity 30
LEVELING (ATA-8) AIR CONDITIONING (ATA-21)

Plumb Bob Kit 17 Lock Hold Open Outflow Valve 31


Leveling - High Precision 17 Test Set - Outflow Valve altitude limiter 31
Weighting Load Cells Kit 18
TOWING & TAXIING (ATA-9) AUTOFLIGHT (ATA-22)

Tow Bar 19 Various Test box 32


Airplane Recovery 21
PARKING & MOORING (ATA-10) COMMUNICATION (ATA-23)

Wheel Chocks 21 Various Breakout box 32


Pole Removal / Installation Tool Static Probe Cover 22
Streamers 22
Mooring Equipment 23 ELECTRICAL POWER (ATA-24)
Plugs & Covers 23
Pin, Lock Landing Gear 24 Removal & Installation IDG 32
IDG Filling Unit 32

Copyright 2016, DCM Aerospace, All Rights reserved


2
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Index
PRODUCT Page PRODUCT Page
FIRE PROTECTION (ATA-26) PNEUMATIC (ATA-36)

Test Equipment - Fire Extinguishing System 33 Precooler Equipment. - Removal / installation 45


Extender Card Set 33
FLIGHT CONTROLS (ATA-27) WATER WASTE (ATA-38)

Various Rigging Equipments 34 Vacuum Waste system 46


Vacuum Toilet - Blockage Removal Tool 46
Drain Mast Plug - Water Waste 46
Test Cable - Potable Water Quantity Transmitter 46
Vacuum Lavatory system - Blockage Removal Tool 47
Vacuum Waste System - Blockage Removal Tool 47
FUEL (ATA-28) AIRBORNE AUXILIARY POWER (ATA-49)

Test Equipment - Leak & Pressure APU Fuel Line shroud 34 Cradle APU & Hoist Equipments (Removal & Inst’l) 48
SpannerWrench - Fuel Sump Drain Valve 34 Lifting Eye - Generator & Starters 49
Adapters—Sump Drain Valve Removal / Installation 34 Thread Protectors - APU 49
Tool fuel Drain Valve Removal 34
Fuel Sampling Equipment 35
Fuel Tank Venting Equipment 36

HYDRAULIC POWER (ATA-29) DOORS (ATA-52)

Drain Kit—Hydraulic System 37 Door Seal Installation Tool 50


Tool set—Hydraulic Filter Overhaul 37
Cable Ass’y—Hydraulic Leakage Check 37 Various Tools (See Aircraft Specific ITEM)
Hydraulic Ground Service Coupling 37
Removal / Installation equipment—Ram Air Turbine 38

Landing Gear (ATA-32) NACELLES (ATA-54)

Sling Equipment 51
Brake Adjustment pressure - Bleed / Test Unit 39
Thread & Axle Protector 40
Inflation Tool - Deflation Tool (Tire & Strut) 41
Brake Bleed Hose Kit 41
Dolly MLG / NLG 42
Wheel & Brake Dolly 42

LIGHTS (ATA-33) STABILIZER (ATA-55)

Landing Light Adjustment Tool 43 Sling Equipment 52


NAVIGATION (ATA-34) WINDOWS (ATA-56)

Breakout Box Equipment - ARINC 600 Line Maint. 44 Sling Equipment - Removal Equipment 53
Extender Box - Radio altimeter Receiver Transmitter 44

Copyright 2016, DCM Aerospace, All Rights reserved


3
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Index
PRODUCT Page PRODUCT Page
WINGS (ATA-57) EXHAUST (ATA-78)

Contour Board 54 Hand Pump - Opening System Thrust Reverser 63


Flap Profile Check Board 54 Hold Open Equipment - Thrust Reverser 64
Wing Leading Edge & Winglets 54

PROPELLERS (ATA-61) STARTING (ATA-80)

Blade Lifter 55 Air Start Adapter 65


Transport and Storage Dolly 55

POWER PLANT (ATA-71) Bombardier Aerospace Airframe Tooling & GSE 64

Engine Lifting Sling 56 CSeries Tooling List - License 65


Bootstrap Lifting Device - Engine 57 Dash-8 Q400 Tooling List - License 67
Engine Crane - Installation & Removal 58 Embraer Phenom 300 Tooling List - License 71
Engine Stand & Engine Cradle 59 Boeing Commercial Airplane GSE - License 72
Lift Fixture Engine Accessory 61 Boeing 737MAX Tooling list - License 73
Dynamometer Load Cell 62 Boeing 787 Tooling List - License 75

ENGINE RECIPROCATING (ATA-72) WARRANTY 85

Engine Rotation Tool 62

NIST TRACEABLE
Some of the GSE are manufactured as per appropriate directives
including its amendments.

EC Declaration of conformity are supplied with the tools. All GSE that requires a gauge comes with NIST
Certification & Calibration Data. Re-calibration of these
Equipment is done by DCM.

Copyright 2016, DCM Aerospace, All Rights reserved


4
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

TIME LIMITS (ATA-5)

LOOP RESISTANCE TESTER

Standard Features:
 Automatic measurement range control
 Insensitive to loop inductance
 Portable, battery-powered operation (approx. 8 hours)
 RS-232 port to support remote data recording
 Measures stray current in the loop
 High-performance battery charger

Note: Features and specifications are subject to change without notice.

Specifications:
——————————————————————————————————————
Model Number Size & weight Use On Aircraft Model
——————————————————————————————————————
906-10246-3 78 Lbs; 737, 777, 787, Dash-8

24” x 24” x 48”


Contains:
(1) LRT (906-10247-3)
(1) Accessory Kit (906-10271-3); which includes a battery charger, RS-232 Cable, spare probe tips and fuses.

This unit is CE Certified but not ATEX Certified.


================================================================================

906-10247-3 737, 777, Dash-8

Contains:
Joint Probe Ass'y (906-10261-8)
Sense and Drive Cable ass'y (906-10260-11 & -12)

This unit is CE Certified but not ATEX Certified.


================================================================================

Copyright 2016, DCM Aerospace, All Rights reserved


5
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

TIME LIMITS (ATA-5)

LOOP RESISTANCE TESTER & LOOP CONTROLLER

Standard Features:

LOOP Resistance Tester:

This set is dedicated to the resistance measurement of closed loops by


induction of an AC Voltage up to 200V.

LOOP Controller:

This tool has a function to measure principal features of aircraft fire


detection loop such as the Airbus, Bombardier, ATR42 & 72, Boeing,
MD and BAE Aircrafts. It is the only Loop Controller in accordance
with the Technical Specifications of the Sensor Loop Manufacturer

Specifications:
——————————————————————————————————————
Model Number Size & weight Use On Aircraft Model
——————————————————————————————————————
20102A2 78 Lbs; All Fleet
Loop Resistance Tester 24” x 16” x 10.10”

9240SI 165 x 75 x 35 mm Bombardier / Airbus


(replaced by 20549SIC 400g
Loop Controller

20549SIC 220 x 115 x 80 mm Bombardier / Airbus


Loop Controller 670g

Copyright 2016, DCM Aerospace, All Rights reserved


6
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

TIME LIMITS (ATA-5)

AIR FLOW CUP –LOW /HI BLOW TEST

Usage:
The air flow cup is used during the low/hi blow pressure test. This tool will
be used locally to detect leaks.

Note: Features and specifications are subject to change without notice.

Specifications:
——————————————————————————————————————
Model Number Size & weight Use On Aircraft Model
——————————————————————————————————————
G21007-1 4.1 Lbs 727, 737, 747, 757, 767, 777, 787
9” x 7” x 7”

Copyright 2016, DCM Aerospace, All Rights reserved


7
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

LIFTING & SHORING (ATA-7)

Adapters, Jacking Pad Aircraft


Usage:
Used to interfere with most tripod jacks.

Note: Features and specifications are subject to change without notice.

———————————————————————————————————–——-
Model Number Applicable Aircraft Location
——————————————————————————————————————
Learjet

2370102-4 Learjet 23, 24, 25, 28, 31, 35, 55, 60 Nose
2572006-3 Learjet 23, 24, 25, 28, 31, 35, 55, 60 Wing
2572006-8 Learjet 24, 25, 28, 31, 35, 55, 60 Wing
2572006-11 Learjet 23, 24, 25, 28, 31, 35, 55, 60 Main

Boeing

A07001-11 767 FWD Body


A07003-1 767 Outboard Body
B07001-7 757 FWD Body
C07002-1 737-600 to 737-900 Wing
C07004-1 737-600 to 737-900 AFT Body
C07007-1 737-600 to 737-900 FWD Body
F70009-1 707 Outboard Wing
F71138-500 /-501 707 Tail
F71139 707 Aircraft Body
F71156 707 Inboard Wing
F80000-7 737-100 to 737-500 Aircraft Body
F80001-1 737-100 to 737-500 AFT Body
F80060-1, -4, -6 707, 737-100 to 737-500, 757 Inboard Wing
J07001-23, -25 777 FWD Body
J07002-1 777 Inner Wing
J07003-1 777 Outer Wing
K07003-15 787 FWD Body
K07004-1 787 Inner Wing
K07005-1 787 Outer Wing

Bombardier

G600-070001-1 CL-605, CL-300 Main & Nose


G601R071001-1 CRJ, CL-850 Main & Nose
G670-071000-1 CRJ700, CRJ900 Main & Nose
G700-071001-1 Global Express Main & Nose
GSB0700007 Q100, Q200, Q300, Q400 Nose
GSB0700017 Q100, Q200, Q300, Q400 Main
CG9000054-0001 CS100/ CS300 Kit complete
CG9000054-0007 CS100/ CS300 Nose
CG9000054-0009 CS100/ CS300 Wing

Embraer

AGE-04510-401 Phenom 100 Main & Nose


AGE-04890-401 Phenom 300 Main & Nose
AGE-04363-401 ERJ170/175/190/195 Main & Nose

Copyright 2016, DCM Aerospace, All Rights reserved


8
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

LIFTING & SHORING (ATA-7)

Aircraft Jacking Equipment


Usage:
Used to jack the airplane using the Main Landing Gear or Nose Landing
Gear Axle.

———————————————————————————————————–——-
Model Number Applicable Aircraft Location
——————————————————————————————————————
A07002-1, -11, -12 767 NLG Axle
A07008-19 767 Jack bar set - MLG Axle
B07003-1, -13, -15 757 Jack bar set - MLG Axle
B07004-1, -12 757 Jack bar set - NLG Axle
B07008-1 757 MLG Axle
G215-070021-73 CL-415 Jack Adaptors - Flat Tire
G415-070027-3 CL-415 Jack Adaptors
J07004-23, -59 777 NLG
J07005-33 777 MLG
J07013-1 777 MLG Axle
K07001-14 787 MLG
K07001-18 787 MLG
K07002-1 787 NLG
2317-T020-401 Embraer Phenom 300 NLG
TMH MA02 ATR42/72 MLG
TMH MA03 Fokker 100 MLG
TMH NA01 ATR42/72 NLG
TMH NA10 Fokker 100 NLG

Copyright 2016, DCM Aerospace, All Rights reserved


9
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

LIFTING & SHORING (ATA-7)

Axle Jacks - Wheel Change

Copyright 2016, DCM Aerospace, All Rights reserved


10
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

LIFTING & SHORING (ATA-7)

Hydraulic Axle Jack - Wheel

———————————————————————————————————–——-
Model Capacity Closed
Number Ton US Height In. Applicable Aircraft
——————————————————————————————————————
TMH CR01 44 6.9 See Data Sheet
TMH CR02 60 3.9 See Data Sheet
TMH CR04 49 6.7 See Data Sheet
TMH CR05 49 8.8 See Data Sheet
TMH CR06 6.6 13.5 See Data Sheet
TMH CR07-00-00 27 19.3 See Data Sheet
TMH CR08 60 6.9 See Data Sheet
TMH CR09 38 10 See Data Sheet
TMH CR10-00-00 8.8 11.8 See Data Sheet
TMH CR11 33 7.1 See Data Sheet
TMH CR12 49 9.2 See Data Sheet
TMH CR13 8.8 11.8 See Data Sheet
TMH CR14 3.3 24.4 See Data Sheet
TMH CR15 60 8.5 See Data Sheet
TMH CR17 38 6.7 See Data Sheet
TMH CR22 84 10.6 See Data Sheet
TMH CR23 60.5 8.46 See Data Sheet
TMH CR25 33 7.8 See Data Sheet
TMH CT02 60 3.9 See Data Sheet
TMH CT03 38 6.7 See Data sheet
TMH CT05 49 9.2 See Data Sheet
TMH CT13 44 6.9 See Data Sheet
TMH CT16 60.5 8.46 See Data Sheet

Copyright 2016, DCM Aerospace, All Rights reserved


11
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

LIFTING & SHORING (ATA-7)

Tripod Jack / Safety Stay

———————————————————————————————————–——–——--
Model Capacity Extended Applicable Typical
Number Ton US Height In. Aircraft Application
——————————————————————————————————————–——
TMH AS01 6.7 96.4 ATR42/72 Tail
TMH AS02 6.6 173.6 ATR42/72 Shoring
TMH AS03 8.8 181.1 A320 / B707 Tail
TMH AS09 13 118 A320 family CEO & NEO Shoring
TMH AS10 11 157 A320 family CEO & NEO Shoring
TMH AS12 13 267.7 A300/330/340 Safety Stay
TMH AS18 1.7 74.8 ATR42/72 Tail
TMH AS20 7 See Data Sheet A300 Shoring
TMH AS23 1.6 98.4 F100 Tail
TMH AS24 11 98.4 B737 Nose
TMH AS25 14 283.4 B747 Tail support
Stanchion
TMH AS36 + TMH AS37 11 181.1 (with extension) A320 Shoring
TMH AS50 7 183 A320 family CEO & NEO Tail
TMH AS51 9 104 B737-100 to – 900 + MAX Nose
TMH AS52 9 283 A330-200 / -300 Tail
A340-200/ -300/ -500 / -600 Tail
A350-900 Tail
TMH AS53 24 179 B787-8 / -9 Nose
TMH TJ20 11 135 A320 family CEO & NEO Nose
TMH TJ21 39 179 A320 family CEO & NEO Wings
TMH TJ30 11 151 B737-100 to –900 + MAX Tail
TMH TJ31 39 122 B737-100 to –900 + MAX Wings
TMH TJ40 11 137 A320 family CEO & NEO Nose
B737-100 to –900 + MAX Nose
TMH TJ41 38 181 A320 family CEO & NEO Wings
B737-100 to –900 + MAX Wings
TMH TJ42 11 183 A320 family CEO & NEO Tail
B737-100 to –900 + MAX Tail
TMH TJ50 22 205 A330-200 / -300 Nose
A340-200/ -300/ -500/ -600 Nose
A350-900 Nose
B787-8 / -9 Nose
TMH TJ51 110 260 A330-200 / -300 Wings
A340-200 / -300 / -500 / -600 Wings
A350-900 Wings
TMH TJ52 22 205 A350-900 Nose
TMH TJ80 78 236 B787-8 / -9 Tail
TMH TJ81 101 193 B787-8 / -9 Wings

Copyright 2016, DCM Aerospace, All Rights reserved


12
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

LIFTING & SHORING (ATA-7)

Tripod Jack / Safety Stay

———————————————————————————————————–——–——--
Model Capacity Extended Applicable Typical
Number Ton US Height In. Aircraft Application
——————————————————————————————————————–——
TMH TR04 49 181.5 ATR42/72 Wing
A320 Wing & Tail
B707 Tail
B737 Tail
B757 Nose, Wing, Tail
B767 Nose
TMH TR05 11 90.5 B737, F100 Nose
TMH TR09 130 267.3 A300 Wing & Tail
A310 Wing & Tail
A330 Wing & Tail
A340 Wing & Tail
B747 Wing
B767 Wing & Tail
TMH TR12 16 275.6 A300 / A310 Tail
A330 / A340 Tail
B747 / B767 Wing
TMH TR13 27 231.9 A300 / A310 Tail
B747 / B767 Wing
TMH TR15 66 322.8 B747 Tail
TMH TR17 110 175.6 A320 Wing
A300 Nose
B707 Tail
B737 Tail
B747 Fuselage
B757 Nose, Wing, Tail
B767 Nose, Fuselage
TMH TR19 3.3 70.9 ATR42 / 72, Fokker F27 Nose
TMH TR20 11 159.5 ATR42/72, Fokker F27 Wing
A320 Tail
B707 Tail
B737 Tail
TMH TR23 55 173.3 A300 / A310 Nose
A320 Wing & Tail
B707 Tail
B737 Tail
B757 Nose, Wing, Tail
B767 Nose
ATR42/72 Wing
TMH TR25 9 196.8 A310, A320, B707, B737 Tail
ATR42 Wing

Copyright 2016, DCM Aerospace, All Rights reserved


13
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

LIFTING & SHORING (ATA-7)

Tripod Jack / Safety Stay

———————————————————————————————————–—————-
Model Capacity Extended Applicable Typical
Number Ton US Height In. Aircraft Application
——————————————————————————————————————–——-
TMH TR27 11 175.2 ATR42/72 Wing
A320 Tail
B707, B737 Tail
B757 Nose, Tail
B767 Nose
TMH TR28 4 74.8 ATR42/72 Nose
TMH TR30 88 204.7 A300/A310 Wing
B767 Tail
TMH TR31 10.6 47.2 A320 Nose
B707, B727, B767 Nose
B737 Tail
TMH TR35 10.6 101.2 B707, B737, F100 Nose
TMH TR38 26.5 185.4 B707, B737 Tail
B757 - Nose & Tail
B767 Nose
TMH TR39 44 220.5 A310 Tail
B757 Wing & Tail
TMH TR40 27 94.5 B727 Nose Wing Tail
B737 Nose & Wing
F100 Nose, Wing Tail
TMH TR41 66 94.5 B727, B737 Nose
F100 Nose & Tail
TMH TR42 17 100.4 See Data Sheet
TMH TR45 7.7 66.9 Embraer 120 Nose & Wing
TMH TR47 55 202.8 A300, A310, A330, A340 Nose
A320 Nose & Wing
B707 Tail
B737, B747 Nose
B757 Nose, Wing, Tail
B767 Nose, Tail
TMH TR55 11 79.1 ATR42/72 Tail
TMH TR58 22 92.5 B727 Tail
B737 Nose
TMH TR62 4.4 181.5 A320 Wing & Tail
B757 Tail
ATR42/72 Wing
TMH TR63 11 134.2 A320 Nose
B737 Tail
TMH TR64 8.8 187 A320 Tail
ATR42/72 Wing
TMH TR65 7.7 216.5 A300/A310 Tail

Copyright 2016, DCM Aerospace, All Rights reserved


14
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

LIFTING & SHORING (ATA-7)

Tripod Jack / Safety Stay

———————————————————————————————————–——————
Model Capacity Extended Applicable Typical
Number Ton US Height In. Aircraft Application
——————————————————————————————————————–———
TMH TR66 22 185 A300/A310/ A320 Nose
B737 Wing & Tail
B747 Nose
B757 Nose & Tail
B767 Nose
ATR42/72 Wing
TMH TR67 77 236.2 A300/A310 Wing & Tail
B747 Wing
B767 Wing & Tail
TMH TR69 33 See data Sheet Aircraft Shoring
TMH TR72 13 147.6 B737 Tail
TMH TR73 33 210.6 A300/A310 Nose & Tail
A320 Tail
A330 /A340
B737 Tail
B747 Nose
B757 Nose & Tail
B767 Nose & Wing
ATR42/72 Wing
TMH TR76 44 See Table B727 Nose & Wing
B737 Wing
F100 Wing
A320/A321, B757 Tail
ATR Wing
B757 Tail
TMH TR79 5.5 74.8 ATR42/72 Nose & Tail
TMH TR85 44 118.1 A319/A320 Nose
B727, B737 Wing
F100 Wing
TMH TR87 11 145.6 A320/A321 Nose
B727-100 & -200 Nose
B737-100 & -200 Tail
B737-300 Nose & Tail
TMH TR88 44 183.2 A320 Wing & Tail
A321 Wing & Tail
B757 Nose & Tail
B767 Nose
ATR42/72 Wing
TMH TR89 6.6 188.9 A320/A321 Tail
TMH TR92 16 275.6 A300, A310, A330, A340 Tail
B747, B767 Wing
TMH TR94 44 115 B727 Nose & Wing
B737 Wing
F100 Wing

Copyright 2016, DCM Aerospace, All Rights reserved


15
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

LIFTING & SHORING (ATA-7)

Tripod Jack / Safety Stay

———————————————————————————————————–—————-
Model Capacity Extended Applicable Typical
Number Ton US Height In. Aircraft Application
——————————————————————————————————————–——-
TMH TS15 11 76.7 ATR42/72 Nose
CRJ100 - Wing
TMH TS19 5.5 74 ATR42/72, CRJ100 Nose
TMH TS31 8.25 75.6 ATR42/72 Nose & Tail
TMH TS32 38.5 115 B737 Wing
TMH TS33 16.5 100.4 A320, B737-100 to –300 Nose
TMH TS34 13 83.4 Business & General Aviation
TMH TS35 28 82.2 Business & General Aviation

Copyright 2016, DCM Aerospace, All Rights reserved


16
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

LEVELING (ATA-8)

Plumb Bob Kit


Usage:
Used to indicate that the aircraft on ground is level.

G601R082202-1
———————————————————————————————————–——-
Model Number Applicable Aircraft
——————————————————————————————————————
108 Learjet 23, 24, 25, 28, 31, 35, 55, 60
G601R082202-1 CRJ / CRJ700 / CRJ900
G700-082001-11 Global Express
GSB0800001 Q100, Q200, Q300, Q400

Leveling High Precision

Usage:
Leveling the aircraft for maintenance
G600-080003-1
———————————————————————————————————–——-
Model Number Applicable Aircraft
——————————————————————————————————————
G600-080003-1 CL-604, CL-605, CL-300
G601R082201-1 CRJ / CL-604 / CL-605
G700-081002-1 Global Express
G600-080001-161 CL-604, CL-605

Copyright 2016, DCM Aerospace, All Rights reserved


17
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

LEVELING (ATA-8)

Weighting Load Cells Kit AE Series


Usage:

———————————————————————————————————–——-
Model Number Description Applicable Aircraft

——————————————————————————————————————
TMH AE01 Overload Warning Horn Kit A310, A320, A330, A340, A350, A380
B737

TMH AE20 Wireless Weighing Load Cells A320 Family Ceo & NEO

TMH AE30 Wireless Weighing Load Cells B737-100 to –900 + MAX


ATR42/72

TMH AE40 Wireless Weighing Load Cells B737-100 to –900 + MAX


A320 family CEO + NEO

TMH AE50 Wireless Weighing Load Cells A330, A340, A350-900, B767, B787-8

TMH AE70 Wireless Weighing Load Cells B747, B777

TMH AE80 Wireless Weighing Load Cells A380

Copyright 2016, DCM Aerospace, All Rights reserved


18
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

TOWING & TAXIING(ATA-9)

Tow Bars
Usage:
Used to tow or push the aircraft

———————————————————————————————————–——-
Model Number Applicable Aircraft Weight Lbs Dimensions In.
——————————————————————————————————————
TMH BRC21 (Two bars in one) A320/ A321/ A330/ A340 846 197
And all aircraft of categories I and IV
As per AS1614 standard

TMH TB02 CRJ100 167 118


TMH TB03 ATR42/72 99 124
TMH TB04 (Splittable) ATR42/72 132.1 122.6
TMH TB05 MD80 595 205
TMH TB07 (Splittable) MD80/ Fokker 100 264 205
TMH TB14 707, KC135 350 248.8
TMH TB15 (Splittable) 707, KC135 420 248.8
TMH TB10 737 506 196.8
TMH TB11 747 880 98.4
TMH TB12 757 583 165.3
TMH TB13 767/ A330/ A340 682 165.3
TMH TB19 A330 / A340 / B777 / B767 660.8 169.3
TMH TB19-80-00 (Splittable) A330/ A340/ B777/ B767 662 118.11
TMH TB22 A300/ A310 580 177.1
TMH TB23 A319/ A320/ A321 484 206.5
TMH TB24 A318/ A319/ A320/ A321/ B737 484 206.6
TMH TB26 A320/ B757 561 206.6
TMH TB27 Fokker 100/ A320/ B737/ BAE146/ C130 264 198.2
TMH TB29 B727/ B737/ A300/ A310 660 177.1
TMH TB30 Fokker 100 / Fokker 70 484 196.8
TMH TB70 A320 Family CEO + NEO 618.95 213.34
TMH TB71 B737 All series (737-100 to 737-900) 618.95 213.34
TMH TB72 B737 / A320 Family CEO + NEO 618.95 213.34
TMH TB73-00-00 (Fly Away) B767/ B777/ A330/ A340 220 78.7
TMH TB77 B767/ B777/ B787/ A330/ A340/ A350 1101 181
TMH TB80 A380-700/-800/-800R/-800F/-900 1650 1403
TMH TB93 See below - Tube + Head

TMH TB93-10-00 Dismountable tube ass’y with swivel ring 165 177
TMH TB93-20-00 Dismountable tube ass’y with shock absorber 172 186
TMH TB93-50-00 Splittable tube ass’y with swivel ring 163 177
TMH TB93-60-00 Splittable tube ass’y with shock absorber 170 186

Available Heads

TMH TB93-31-00 / CRJ700 / 900 / 1000


TMH TB93-32-00 / CRJ100 / 200
TMH TB93-33-00 / E170/ E175/ E190 / E195/ Lineage 1000

Copyright 2016, DCM Aerospace, All Rights reserved


19
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

TOWING & TAXIING(ATA-9)

Tow Bars
Usage:
Used to tow or push the aircraft

———————————————————————————————————–——-
Model Number Applicable Aircraft Weight Lbs Dimensions In.
——————————————————————————————————————
TMH TBC11 B747 880 141
TMH TBC45 B737 / A320 550 200
TMH TBC50 A319/ A320/ A321 550 200
TMH TBC60-10-00 B767/ B777/ A330/ A340 700 147
TMH TBC60-20-00 (Splittable) B767/ B777/ A330/ A340 700 147
TMH TBC60-60-00 (Splittable) B767/ B777/ A330/ A340 700 147
TMH TBC95-60-00 A340-500/-600 880 141
G670091000-1 CRJ700/900 178 153
GSB0900005 Dash 8-400 125 140
AGE-04914-401 Phenom 300 (Head only) 15

Copyright 2016, DCM Aerospace, All Rights reserved


20
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

TOWING & TAXIING(ATA-9)

Airplane Recovery - Towing Strap


Usage:
Used to tow the aircraft by the undercarriage.
G700-091004-1
———————————————————————————————————–——-
Model Number Applicable Aircraft
——————————————————————————————————————
G601R091008-1 CRJ200
G604-091008-1 CL-604/CL-605
G700-091004-1 Global Express
GSB091007-1 Q100, Q200, Q300
GSB0910008-1 Q400

Wheel Chocks

Usage:
Used to prevent the aircraft from moving while parked or moored.

———————————————————————————————————–——-
Model Number Applicable Aircraft Length Width Height Weight
——————————————————————————————————————
DCM1506 CL-604, 605, GX, CRJ200 24” 7” 5 1/2” 24
CRJ700/900, 757
DCM1534 747, 767, 777, 787 37” 7” 5 1/2” 37

DCM1536 Learjet 23, 24, 25, 28, 29, 31 12” 7” 5 1/2” 12


35, 36, 40, 45, 55, 60, 60XR
ERJ135, 145, 170, 175, 190, 195
Boeing 707, 717, 727, 737 all
MD-80, Phenom 300

DCM1537 CL-300, ERJ-170, 175, 190, 195 18” 7” 5 1/2” 18

GSB100004 Dash-8 Q100, Q200, Q300, Q400 24” 7” 5 1/2” 24”

Copyright 2016, DCM Aerospace, All Rights reserved


21
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

PARKING & MOORING (ATA-10)

Pole Removal / Installation Tool - Pitot Static

Usage:
Used to remove or install the protective cover on the pitot static probe .
A10002-9

———————————————————————————————————–——-
Model Number Applicable Aircraft
——————————————————————————————————————
A10002-7 Boeing 737 all models, ERJ-170, 175, 190, 195

A10002-9 Boeing 747, 767, 777, 787

Warning Streamers

Usage:
Used to highlight locations of safetying or maintenance - required devices
on the aircraft and to provide for their timely removal. Attached to GSE
installed on the aircraft.

———————————————————————————————————–——-
Model Number Applicable Aircraft Length
——————————————————————————————————————
G600-100001-11 (Remove Before Flight) CL-600, 604, 605, CL-300, Global Express 27”
G601R100001-1 (Remove after test) CRJ200, 700, 900 27”
G601R100001-2 (Remove Before Flight) CRJ200, 700, 900, Q100, Q200, Q300
Q400 27”
GSB100001 (Remove after Test) Q100, Q200, Q300, Q400 27”
GSB100002 (Remove Before Flight) Q100, Q200, Q300, Q400 27”
NAS1091 (Remove Before Flight) Boeing all & Embraer all Various
NAS1756 (Remove Before Flight) Boeing all & Embraer all 12”, 24”, 36”
60”

Copyright 2016, DCM Aerospace, All Rights reserved


22
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

PARKING & MOORING (ATA-10)

Mooring Equipment

Usage: G600-100018-1
To Secure Aircraft to Ground

———————————————————————————————————–——-
Model Number Applicable Aircraft
——————————————————————————————————————
C10002-9 737-600 /700 /800 /900
C10008-xx B737-8
G1001020014-001 CL-300
G600-100018-1 CL-600 / 601 / 604
G601R102001-1 CRJ
G700-102001-1 Global Express

Plug & Covers

Usage:
For Environmental damage protection

Various Plugs & Covers in I.T.E.M. available. Review your specific aircraft
ITEM for part numbers.

Copyright 2016, DCM Aerospace, All Rights reserved


23
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

PARKING & MOORING (ATA-10)

Pin, Lock Landing Gear

Usage:
Used to ensure that the landing gears remain locked in the down position when
the aircraft is parked or moored / to lock the towing lever during towing.

———————————————————————————————————–——-
Model Number Description Applicable Aircraft
——————————————————————————————————————
A09003-1 Lock pin towing lever NLG 737-600 to –900, 757, 767, 777
A09003-2 Lock pin towing lever NLG 737-600 to –900, 767, 777, 787
G600-100015-1 Pin NLG ground lock CL-604 / CL-605
G604-101051-1 Pin MLG ground lock CL-604 / CL-605
G601R101103-1 Pin MLG ground lock CRJ200
G601R101104-1 Pin NLG ground lock CRJ200
G670100001-1 Pin NLG ground lock CRJ700 / 900
G670100002-1 Pin MLG ground lock CRJ700 / 900
GSB100007 Pin MLG ground lock Q100, Q200, Q300
GSB100019 Pin NLG ground lock Q100, Q200, Q300, Q400
GSB100029 Pin MLG ground lock Q100, Q200, Q300, Q400
DCM1532 Pin MLG ground lock CL-300
DCM1533 Pin NLG ground lock CL-300
DCM1581 PIN MLG Ground Lock Legacy EMB-550
DCM1582 PIN NLG Ground Lock Legacy EMB-550
A32014-1 MLG Downlock Pin 767
A32014-2 NLG Downlock Pin 767
C32026-1 NLG & MLG Downlock Pin 737-600/ 700/ 800/ 900
F70008-500/501 NLG Downlock Pin 707
J32011-3 MLG Downlock Pin 777, 787
J32011-7 NLG Downlock Pin 777, 787

Copyright 2016, DCM Aerospace, All Rights reserved


24
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

SERVICING (ATA-12)

Lavatory & Potable Water

———————————————————————————————————–——-
Model Number Description Applicable Aircraft

——————————————————————————————————————
G1001200001-001 Lavatory Servicing Unit Adaptor CL-300
G601R121801-29 Adaptor Potable Water Supply CRJ

Nitrogen & Oxygen

———————————————————————————————————–——-
Model Number Description Applicable Aircraft
————————————————————————————————————–—
G600-120001-1 Adaptor Nitrogen Charging CL-600/604/605, 300, Global Express
G601R121611-1 Adaptor Nitrogen Charging CRJ
G670121000-1 Dolly - For Nitrogen bottle With Booster All Aircraft
(1 Bottle)

GSB1210012 Kit Oxygen Charging Adapter Q100, Q200, Q300, Q400


G700-200002-1 Panel Nitrogen Shop Air 0-5 PSIG Global Express
G604-200026-1 Gaseous Test Panel 0-100 PSIG CL-604, Global Express
G601R121605-1 Gaseous Test Panel 0-100 PSIG CRJ200/ 700/ 900, Q100/ 200/ 300/ 400
TMH RD01 Nitrogen Servicing Cart / Axle carrying
Wheel Carrying / Wheel Change Dolly See Data Sheet
TMH RD18 Nitrogen Cart (4 Bottles) See Data Sheet
TMH RD29 Nitrogen Cart (2 Bottles) See Data Sheet
TMH RD49 Oxygen Cart (2 Bottles) See Data Sheet

Copyright 2016, DCM Aerospace, All Rights reserved


25
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

SERVICING (ATA-12)

NATO CASE

———————————————————————————————————–——-
Model Number Description Applicable Aircraft

——————————————————————————————————————
TMH GA35-00-00 Nitrogen Test Box All Aircraft

TMH GA36-00-00 Air 3520 Test Box All Aircraft

TMH GA37 Skydrol Test Box All Aircraft

TMH GA38-00-00 Nitrogen and /or Mineral Oil MIL-H5606 All Aircraft

TMH GA41-00-00 Nitrogen / Air 3520 Test Box All Aircraft

TMH GA42-00-00 Nitrogen/Skydrol Test Box All Aircraft

TMH GA43-00-00 Skydrol Test Box All Aircraft

TMH GA50-00-00 Nitrogen/Air 3520 Test Box ATR42/72

TMH GA53-00-00 Nitrogen/Skydrol Test Box All Aircraft

TMH GA55-00-00 Nitrogen / Skydrol Test Box All Aircraft

TMH GA70 Mineral Oil Test Box All Aircraft

TMH GA71 Skydrol Test Box All Aircraft

TMH GA72 Nitrogen Test Box All Aircraft

TMH GA73 Mineral Oil / Nitrogen Test Box All Aircraft

TMH GA74 Skydrol / Nitrogen Test Box All Aircraft

Copyright 2016, DCM Aerospace, All Rights reserved


26
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

STANDARD PRACTICES AIRFRAME (ATA-20)

Grommet & O Ring Installation Tool


Usage:
To Install NAS1368 Plastic flip grommet
A20006-32
———————————————————————————————————–——-
Model Number Description Applicable Aircraft
——————————————————————————————————————
A20006-32 Installation Tool Grommet Set NAS1368 737 all, 767, 777, 787
ST1065C Installation Tool Grommet Set NAS1368 707, 737
ST848 Installation Tools O Rings 767
ST848R Removal Tool O Rings 767, 777, 737 all models

Cutting Tool - Swaging Tool - Bearing Tools

———————————————————————————————————–——-
Model Number Description Applicable Aircraft
——————————————————————————————————————
A20012-10/-11 Swaging Tool—Bearing (S302T001-305) 767
C57001-1 Roller Swaging Tool (.560 & .619 dia.) 737
F70297-1 Roller Swaging Tool (BACB10C196 Bearing) 707
F80013-37 Kit Roller Swage Bearing (2 3/8” - 2 5/8” dia.) Boeing all aircrafts
F80113-105 Kit Roller Swage Bearing (15/32” - 2 3/8” dia.) Boeing all aircrafts
F80113-61 Kit Roller Swage Bearing (3 7/8 - 4 1/8” dia.) Boeing all aircrafts
F80113-88 Kit Roller Swage Bearing (3” - 3 5/8” dia.) Boeing all aircrafts
F80113-95 Kit Roller Swage Bearing (5 1/4” dia.) 777
F80117-1 & -10 Roller Bearing Swage Assembly (10-60545-205S) 737-100 to –500
F80205-1 Bearing Swaging Equipment (10-61846-3 & 10-61970-2) 737-100 to –500
G600-206001-1 Hydraulic Swaging tool CL-600
G600-206002-1 Cutter Kit Bearing - MS14103-5 Bearing CL-600
G600-206003-3 Cutter Kit Bearing - MS14103-7A Bearing CL-600
G600-206004-1 Swaging Tool Kit - MS14103-5 Bearing CL-600
G600-206006-1 Swaging Tool Kit - MS14103-4 Bearing CL-600
G600-206007-1 Cutter Kit Bearing - MS14103-4 Bearing CL-600
G600-206008-1 Cutter Kit Bearing - MS14103-6 Bearing CL-600
G600-206009-1 Swaging Tool Kit - MS14103-6 Bearing CL-600
G600-322003-1 Kit Oversize Bushing Replacement (Cutter) CL-605
G601R200007-39 Hydraulic Kit Bearing Swaging CRJ
G601R200008-1 Bearing Tool Kit - Swaging and Cutting CRJ
(Use with G601R200007-39 MS14103-7A, MS14103-8
KR9-CWGB)

G601R200009-1 Bearing Tool Kit - Swaging and Cutting CRJ/ 700/ 900
KSC322209B-1, KSC322209B-2, KSC322209B-3

Copyright 2016, DCM Aerospace, All Rights reserved


27
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

STANDARD PRACTICES AIRFRAME (ATA-20)

Cutting Tool - Swaging Tool - Bearing Tools

———————————————————————————————————–——-
Model Number Description Applicable Aircraft
——————————————————————————————————————
ST918 Mandrel Ball Bearing Pressing 707, 737
ST919 Support - Bearing Installation 707, 737, 767
ST922 Staking Tool 767
ST925 Staking Tool Bearing Point 707, 737
ST926 Staking Tool Roller Bearing 707, 737, 767, 777
ST927 Removal Tool Bearing 707, 737, 767, 777
ST928C Swaging Tool Roller Bearing Sleeve 737
ST929-1A Swaging Tool Roller Bearing Sleeve 707, 737
ST929-2C Staking Tool—Bearing Sleeve 6 point 767
ST929-4 Staking Tool Bearing Line 707, 737
ST931A & B Staking Tool Bearing Ball Point 707, 737
ST931D Staking Tool Ball Bearing 707
ST932 Staking Tool Roller Bearing 707, 737, 767
ST932B Swaging Tool Roller Housing Bearing 707, 737
ST932C Swaging Tool Roller 707, 737
ST933 Tool Bearing, Ring, Housing & Shaft Type 707

Digital Protractor
———————————————————————————————————–——-
Model Number Description Applicable Aircraft
——————————————————————————————————————
3052-11 / 655-881J Dial Indicator ERJ170/175
G601R200003-1 Dial Indicators & Holder (In.) CRJ/700/900/ CL-604 / CL-605
G601R200003-3 Dial Indicators & Holder (Metric) CRJ/700/900/ CL-604 / CL-605
GSB2000009 Digital Protractor Q100, Q200, Q300, Q400
PRO360 / KS5549 Digital Protractor CRJ / 700 / 900, CL604, Global Express, CL-300
CL-605
950-315 Digital Protractor CL-605
A01-700-28000-1 Aileron / Flap RH/LH Rigging CRJ / 700 / 900, CL605, Global Express, CL300

Gaseous Test Panel


To supply regulated shop air or nitrogen for general purposes.
G604-200026-1
———————————————————————————————————–——–
Model Number Description Applicable Aircraft
——————————————————————————————————————
G604-200026-1 Air Test Panel CL-604 / CL-605 / Global Express
G601R121605-1 Air Test Panel CRJ200 / 700 / 900

Copyright 2016, DCM Aerospace, All Rights reserved


28
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

STANDARD PRACTICES AIRFRAME (ATA-20)

Positive and Locking System


Installation & Removal Tool of Tab Washer NSA5454

Description:

The positive locking system has been developped to cover the needs of a
wide range of applications requiring a quick, self-contained, re-usable, com-
pact, positive locking method for threaded components.

Standard Features:

- The nut and washer assembly are highly re-usable


- Easily removed without damage
- Kitting of all tools include in a convenient plastic case
- Nut, lockwasher and shaft are balanced due to the absence of a keyway.

———————————————————————————————————–——-
Model Number Applicable Aircraft
——————————————————————————————————————
SL90 A300, A310, A319, A320, A321, A340

Copyright 2016, DCM Aerospace, All Rights reserved


29
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

STANDARD PRACTICES AIRFRAME (ATA-20)

Boom Hoist Equipment


(400 lbs Capacity)

Model # A20001-82
Use on Aircraft Models:

Boeing 737-600 to –900


Boeing 747
Boeing 757
Boeing 767
Boeing 777
Boeing 787

USAGE
The A20001-82 Boom Hoist equipment, in conjunction with appropriate adapters, will be used to to install / remove various
airplane components.

Short hoist Arm Ass’y may be used as a 27 inch extension to the boom hoist. When required for installation & removal of vari-
ous airplane components.

Long hoist arm ass’y may be used in conjunction with A78018 Sling– Thrust Reverser Translating Sleeve, CF6-80C2 & as an
extension to the Boom Hoist.

Weight And Dimensions:

416 Lbs Boom Hoist


18 Lbs Short Hoist Arm
36 Lbs Long Hoist Arm

Boom Hoist Assembled: 46” x 92” x 113”


Boom Hoist Disassembled: 36” x 86” x 92”

Short Hoist Arm: 2” x 10” x 31”


Long Hoist Arm: 2” x 31” x 55”

Copyright 2016, DCM Aerospace, All Rights reserved


30
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

AIR CONDITIONING (ATA-21)

Lock Hold Open Outflow Valve


Usage:
Used to lock the outflow valve in the full open position which allows
airplane to be dispatched for unpressurized flight with outflow valve
inoperative.

———————————————————————————————————–——-
Model Number Applicable Aircraft
——————————————————————————————————————
A21014-1 767-400
J21006-1 777
K21007-1 787

Test Set Outflow Valve Altitude Limiter

Usage:
Used to do the special test of the outflow valves.
G601-210007-1
———————————————————————————————————–——-
Model Number Description Applicable Aircraft
——————————————————————————————————————
G601-210007-1 Test Set - Outflow Valve Altitude limiter CL-600 / CL-604 / CL-605
G601-210007-3 Test Set - Outflow Valve Altitude limiter CL-600 / CL-604 / CL-605
G601R210001-1 Test Set - Outflow Valve Altitude limiter CRJ
115 Vac / 60 Hz

G601R210001-145 Test Set - Outflow Valve Altitude limiter CRJ


220 Vac / 50 Hz

G601R210001-3 Test Set - Outflow Valve Altitude limiter CRJ


(No Vacuum Pump)

G600-210004-183 Kit Pneumatic Pressure Test (115 V - 60 Hz) CL-605


G600-210004-197 Kit Pneumatic Pressure Test (220 V - 50 Hz) CL-605

Copyright 2016, DCM Aerospace, All Rights reserved


31
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

AUTOFLIGHT (ATA-22)
Usage:
Various Test Boxes - See Airplane I.T.E.M.
Used to actuate the
emergency release latch on overhead bins.

COMMUNICATION (ATA-23)

Various Test Boxes - See Airplane I.T.E.M.

ELECTRICAL POWER (ATA-24)


Removal & Installation IDG

———————————————————————————————————–——-
Model Number Description Applicable Aircraft
——————————————————————————————————————
TMH SD09-10-00 R/I Dolly IDG V2500 Serie 766219 A318 / A319 / A320 / A321
TMH SD09-60-00 R/I Dolly IDG V2500 Serie 772292 A318 / A319 / A320 / A321
TMH SD10-20-00 R/I Dolly IDG CFM56 - 740119 Serie A319/ A320 / A321
TMH SD10-60-00 R/I Dolly IDG CFM56 - 772181, A319/ A320 / A321
1706903, 1708897 Serie
TMH SD25 R/I IDG B747-400 / B757 / B767
TMH SD36-10-00 R/I IDG - CF6-80E1 A330/ A340
TMH SD36-20-00 R/I IDG - CFM56-5 A330/ A340
TMH SD36-30-00 R/I IDG - PW4168 A330/ A340
TMH SD36-60-00 R/I IDG - CFM56-5 (Type 767 142)

TMH GA30 - IDG Filling Unit

Copyright 2016, DCM Aerospace, All Rights reserved


32
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

FIRE PROTECTION (ATA-26)

Test Equipment—Fire Extinguishing System

———————————————————————————————————–——-
Model Number Description Applicable aircraft
——————————————————————————————————————
B26002-1 Test Equipment - Discharge Lines, Cargo Fire Ext. 737 all models
C26001-20 Test Equipment - Fire Extinguishing System 737
C26002-21 Test Equipment - Engine / APU Fire Detection System 737-100 to –500
C26004-8 Test Equipment - Engine Fire Extinguishing System 737 all models
C26004-32 Test Equipment - Engine Fire Extinguishing System 737 all models
C26004-33 Test Equipment - Engine Fire Extinguishing System 737 all models
C26005-1 Test Box - APU / Engine Fire Detection System 737-600 to –900
C26006-1 Test Box - Cargo Fire Extinguishing System 737 all models
C26006-29 Test Box - Cargo Fire Extinguishing System 737 all models
C26006-30 Test Box - Cargo Fire Extinguishing System 737 all models
C26006-54 Test Box - Cargo Fire Extinguishing System 737 all models
C26008-xx Removal / Installation - Cargo Fire Extinguisher 737-8
C26009-xx Removal / Installation - Engine Fire Extinguisher 737-8
F70213-1 Breakout Box Control Unit Fire Detection 707
F80229-69 & -61 Test Equipment - Fire Extinguishing System 737 all models
F80229-52 & -56 Shorting Plug Ass’y 737 all models
F80229 Adapter Cable Assembly 737 all models
(-48, -57, -58, -59, -60, -61)

G700-260001-1 Harness - Fire Detection / Extinguishing Global Express


G700-262102-1 Tester - Firex Squib Circuit Global Express
J26003-12 Test Box - Time Delay, Cargo Fire Extinguishing Bottle 777
J26004-24, 28, 53, 54 Test Equipment - Squib Fire Extinguishing System 777, 787
J26005-1, -19, -24, -32 Test Equipment - Fire Extinguishing Tubing Cargo 767, 777
J26008-1, -2, -3, -35 Test Equipment - Engine Fire Extinguishing System 777
J26009-1 Test Equipment - Fire Extinguishing Tubing Cargo 767, 777
K26001-1, -20 Test Equipment - Fire Extinguishing Tubing Cargo 787

Extender Card Set

———————————————————————————————————–——-
Model Number Description Applicable Aircraft
——————————————————————————————————————
G26004-39 / -40 Extender Card - Electronic Card file 767
J26002-1 / -2 / -3 Extender Card—E/E Equipment 777
AGE-05190-401 Extender Cards Set Phenom 300

Copyright 2016, DCM Aerospace, All Rights reserved


33
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

FLIGHT CONTROLS (ATA-27)

Various Tool - See Airplane I.T.E.M.

FUEL (ATA-28)
Test Equipment—Leak & Pressure APU Fuel Line Shroud

Usage:
Used to check pressure and leakage of APU fuel line shroud.

———————————————————————————————————–——-
Model Number Applicable Aircraft
——————————————————————————————————————
A28005-24 767
A28005-50 737-600/700/800/900, 767, 777
A28005-43 777
A28005-48 737-600/700/800/900
K28004-1, -30 787

Spanner Wrench Fuel Sump Drain Valve


Usage:
Use for installation or removal of sump drain Valve.

———————————————————————————————————–——-
Model Number Applicable Aircraft
——————————————————————————————————————
A28012-1 767, 777
A28012-2 777
C28002-9 737-100/200/300/400/500, 777
K28001-1 787

Copyright 2016, DCM Aerospace, All Rights reserved


34
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

FUEL (ATA-28)

Adapters - Sump Drain Valve Removal / Installation

Usage:
Use for installation & Removal of the primary sump drain valves from the
fuel tanks.
B28001-11
———————————————————————————————————–——-
Model Number Applicable Aircraft
——————————————————————————————————————
B28001-11 737-100 /-200
B28001-13 737-300 thru -900
B28001-18 727, 737, 757, 767, 777

Tool Fuel Drain Valve Removal


Usage:
Used to drain fuel from all tanks outboard of fuselage.
K28002-1

———————————————————————————————————–——-
Model Number Applicable Aircraft
——————————————————————————————————————
G600-280002-23 CL-600 / CL-300 / CL-605
G601R281101-1 CRJ / 700 / 900 (2 pins)
G601R281101-9 CRJ / 700 / 900 (4 pins)
G700-280001-1 Global Express
GSB2810001 Dash-8 Q100 / Q200 / Q300 / Q400
J28013-1 767, 777
K28002-1 787
CG9000063-0001 CS100/ CS300

Fuel Sampling Equipment


Usage:
Used to collect fuel samples from the sump drain valves and to drain water.
A12001-15
———————————————————————————————————–——-
Model Number Applicable Aircraft
——————————————————————————————————————
A12001-14 747, 767
A12001-15 777, 787
GSB1210014 Q100, Q200, Q300, Q400

Copyright 2016, DCM Aerospace, All Rights reserved


35
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

FUEL (ATA-28)

Fuel Tank Venting

Usage:
Used to ventilate fuel tanks during maintenance.

A28003
———————————————————————————————————–——–
Model Number Applicable Aircraft
——————————————————————————————————————
A28003-90 767, 787
G1002813022-001 CL-300
G604-281101-1 CL-604 / CL-605
G670281102-1 CRJ/ 700 /900 (Outboard Fuel Tank)
G670281103-1 CRJ/ 700 /900 (Inboard Fuel Tank)
G700-281001-1 Global Express

G604-281101-1

Copyright 2016, DCM Aerospace, All Rights reserved


36
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

HYDRAULIC POWER (ATA-29)

Drain Kit - Hydraulic System & Ground Service Coupling

———————————————————————————————————–——–
Model Number Description Applicable Aircraft
——————————————————————————————————————
G600-120005-1 Adapter Ground servicing Engines CL-604/ CL-601/ CL-600 / CL-605
C29004-1 Drain Hose Hydraulic Reservoir Boeing 737 all models
CG9000023-0001 Kit Hydraulic Fluid Sampling CS100/ CS300
G600-290001-11 Kit Hydraulic System Drain Line CL-604 / CL-605
G600-290002-1 Kit Sampling Adapter CL-604 / CL-605
G601R291001-1 Drain Kit—Hydraulic System CRJ200/ 700/ 900
G601R291004-25 Kit Sampling Adapter CRJ200/ 700/ 900
GSB2900002 Kit Hydraulic Coupling Q100/ Q200/ Q300/ Q400
G700-121204-1 Ground Hydraulic Coupling Global Express
TYPE 101 Ground Hydraulic Coupling A300/ A310/ A320/ A330/ A340/ B747
B757/ B767

Tool Set—Hydraulic Filter Overhaul

———————————————————————————————————–——–
Model Number Description Applicable Aircraft
——————————————————————————————————————
A29003-49 Tool Set Hydraulic Filter Overhaul 767, 777
A29003-54 Tool Set Hydraulic Filter Overhaul 777
A29004-1 Tool set - Hydraulic Module Filter Overhaul 767

Cable Assembly - Hydraulic Leakage Set


Cable assembly is used in series between the airplane wiring connector & the
electric driven hydraulic pump. With leads to connect to a 0-50 AMP AC
Ammeter for measuring pump current & determining related system internal
leakage.

———————————————————————————————————–——–
Model Number Applicable Aircraft
——————————————————————————————————————
F80135-13 Boeing 727 & 737 all models

Copyright 2016, DCM Aerospace, All Rights reserved


37
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

HYDRAULIC POWER (ATA-29)

Removal / Installation Equipment—Ram Air Turbine


Usage: Used in the installation / removal of the Ram air turbine

———————————————————————————————————–——–
Model Number Applicable Aircraft
——————————————————————————————————————
J29002-1 Boeing 777
K29002-78 Boeing 787

Hydraulic Test Bench / Filling Unit

———————————————————————————————————–——–
Model Number Description Applicable Aircraft
——————————————————————————————————————
TMH GA01 Hydraulic Test Bench Max. 3000 psi See data sheet
TMH GA10 Filling Unit 0 to 435 psi See data sheet
TMH GA11-00-00 Mobile Fluid Rig - Max 8700 psi See data sheet
TMH GA15-00-00 Mobile Fluid Rig - Max 3000 psi See data sheet
TMH GA16-10-00 Portable Fluid Flow Assessment Unit See data sheet
TMH GA18 Portable Turbine Oil Dispenser See data sheet
TMH GA24 Mobile Fluid Rig - Max 145 psi See data sheet
TMH GA25 Hydraulic System Fluid Dispenser See data sheet
TMH GA26 Mobile Fluid Rig - Max 435 psi See data sheet
TMH GA34-50-00 MLG Refilling Tool - Max 200 psi See data sheet
TMH GG13-50-00 MLG Filling Unit - Max 200 psi See data sheet
TMH PM07-50-00 Hand Pump - Mineral Oil See data sheet
TMH PM07-60-00 Hand Pump - Skydrol See data sheet
TMH 3000 Mobile Hydraulic test stand - Max 3500 psi See data sheet
TMH 5000 Mobile Hydraulic test stand - Max 5000 psi See data sheet
TMH 5500 Mobile Hydraulic test stand - Max 5000 psi See data sheet
MEH 2429 Mobile Hydraulic test unit ATR
GE 195 Hydraulic Testing Unit See data sheet

Copyright 2016, DCM Aerospace, All Rights reserved


38
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

LANDING GEAR (ATA-32)

Brake Pressure Unit - Adjusting & Servicing

A01-670-1500-1
The DCM “Brake Pressure Test Unit” is a very simple unit which is intended to be used for adjusting
and servicing of the brake system, on either the CRJ series, Challenger 300, Challenger 605, Global
Express and ERJ140/145 aircrafts.
In fact, it can also be used on any other types of aircraft by simply changing the adapter that connect to the brake
system.

STANDARD FEATURES

Model: A01-670-1500-1

Finish: Safety yellow acrylic enamel

Accuracy of the unit: (0.1%) gauge and transducer

Pressure gauge: Skydroll resistant. Initial calibration required, high impact resistant,
longer field service life, great reading accuracy.

Maximum Working Pressure: 3,000 psi +/- 200 psi

ADDITIONAL INFORMATIONS

This kit can be operated with or without a computer


(# RCS 486/PE NT - supplied by Techmatron)
with an acquisition card # UPC 601U (supplied by
validyne). These equipments are not included with
the DCM kit.

The wheels, (2 swivels and 2 fixed), tow bar and


handles make the DCM oil brake easy to move and
handle.

Copyright 2016, DCM Aerospace, All Rights reserved


39
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

LANDING GEAR (ATA-32)

Brake Adjustment Pressure - Bleed / Test Unit

G600-320024-145

———————————————————————————————————–——–
Model Number Description Applicable Aircraft
——————————————————————————————————————
G600-320024-145 Brake Pressure Test kit CL-604 / CL-605
G600-320026-123 Fixt. Brake Pedal Pressure Test CL-604 / CL-605
G601R324302-1 Brake Pressure Test Kit CRJ
G601R324303-1 Fixt. Brake Pedal Pressure Test CRJ200/ 700/ 900
G670324001-1 Brake Pressure Unit - Adjusting & Servicing CRJ200/ 700/ 900/ 1000
A01-670-1500-1 Brake Pressure Unit - Adjusting & Servicing CL-604 /Global Express /
(See data sheet on next page) ERJ145
G1003243031-001 Brake Pedal Adapter Kit CL-300
J32001-67 / -68 Measuring Equipment Brake Pedal 737-600/-700/-800/-900
747, 757, 767, 777
AGE-05416-401 Device Pressure Test Brake Phenom 300

Thread Protector - Axle Protector

———————————————————————————————————–——–
Model Number Description Applicable Aircraft
——————————————————————————————————————
C32022-17 Thread Protector MLG & NLG Axle 737-600/ -700/ -800 /-900
C32022-20 Thread Protector MLG & NLG Axle 737-600/ -700/ -800/ -900
F72880-1 Thread Protector Landing Gear Axle 707
F72913-10 Thread Protector MLG Axle 737-100/-200/-300/-400/-500
F72913-8 Axle Protector 737-100/-200/-300/-400/-500
F72913-11 Thread Protector 737-100/-200/-300/-400/-500
F72913-13 Thread Protector MLG & NLG Axle 737-100/-200/-300/-400/-500
F80115-10 Thread Protector & Alignment Tool Main Gear 737-100/-200/-300/-500
F80115-11 Thread Protector & Alignment Tool Main Gear 737-100/-200/-300/-400/-500
F80115-12 Thread Protector & Alignment Tool Main Gear 737-100/-200/-300/-500
F80115-13 & -14 Thread Protector & Alignment Tool Main Gear 737-100/-200/-300/-400/-500
F80115-15 Thread Protector & Alignment Tool Main Gear 727
F80116-16 & -17 Thread Protector & Alignment Tool Main Gear 737-400
J32007-1 Thread Protector NLG Axle 777
J32031-12 Protector Equipment Axle - MLG 767-400, 777, 787
K32002-1 Thread Protector NLG Axle 787
G601R324305-1 Protective Sleeve MLG CRJ200
G601R326306-1 Protective Nut MLG Sleeve CRJ200
G670-321101-2 Protective Sleeve MLG Axle CRJ700

Copyright 2016, DCM Aerospace, All Rights reserved


40
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

LANDING GEAR (ATA-32)

Inflation Tool - Deflation Tool (Tire & Strut)

———————————————————————————————————–——–
Model Number Description Applicable Aircraft
——————————————————————————————————————
A12007-23 Inflation Tool Tire 767-200/ -300/ -400, 747-400/ -8
F70200-18 Inflation Tool Strut 707, 727, 737 All models, 747, 757
767-400, 777, 787
F70199-52 Inflation Tool Tire 707, 727, 737 all models, 757, 767, 777,
787
TMH DI56-10-00 Inflation Tool Tire Max 175 PSI All Aircraft (Equipped with standard tire
valve or High flow tire valve)
TMH DI56-20-00 Inflation Tool Tire Max 360 PSI All aircraft (Equipped with standard tire
valve or High flow tire valve)
F70294-1 Deflation Tool Tire 707, 737 All models
GSB1210016 Inflation Tool Strut / Gauge CRJ, Q100, Q200, Q300, Q400
GSB1216005 Deflation Tool Tire Q100, Q200, Q300, Q400
G600-324006-1 Digital Pressure Gauge - Tire CL-600/ -604 / -605 / -300

Brake Bleed Hose Kit

———————————————————————————————————–——–
Model Number Description Applicable Aircraft
——————————————————————————————————————
G1003240016-025 Brake Bleed Hose CL-300
G600-320024-89 Adapter Bleeder Valve CL-600/ 604 / CRJ200/ 700/ 900/ GX
G600-320025-11 Brake Bleed Hose CL-600/ 604 / -605
J32060-1 Drain Equipment - OLEO MLG & NLG 767, 777, 787, 737 all models
G601R324301-1 Brake Bleed Hose CRJ200, Q100, Q200, Q300, Q400
G700-324305-1 Brake Bleed Hose Global Express
G1003210001-001 Servicing Adapter NLG - Hydraulic CL-300
MS27612-5 Adapter Bleeder Valve CRJ - Embraer
MS27611 Valve Bleeder CRJ - Embraer
AN6204-1 Brake Vale Bleeder Gulfstream - Falcon
TMH GA12 Acft. Brake System Filling Unit All Aircrafts

G700-324305-1 J32060-1 G1003240016-025 G1003210001-001 TMH GA12

Copyright 2016, DCM Aerospace, All Rights reserved


41
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

LANDING GEAR (ATA-32)

Dolly MLG & NLG

———————————————————————————————————–——–
Model Number Description Applicable Aircraft
——————————————————————————————————————
23TME5-83045 Installation Dolly MLG Boeing 707
4PME5-83046 Transport & Wheel Inst’l Dolly Nose Gear Boeing 707
A32038-1 Transport Dolly - NLG 767 (Not for shipping) Boeing 767
A38038-23 Transport Dolly - NLG 757 & 767 (not for shipping) Boeing 757, 767
B32050-50 Build Up Stand - MLG Boeing 757, 767
A32057-1 / -10 / -40 Build Up Stand - NLG Boeing 757, 767
G604-320001-1 Dolly MLG & NLG Removal & Installation CL-604
G601R321006-1 Dolly MLG & NLG Removal & Installation CRJ200
J32030-44 Transportation Dolly - NLG Boeing 777
K32010-1 Transportation Dolly - NLG Boeing 787
DCM1563 Transport Dolly - NLG & MLG Installation Learjet 85
DCM1564 Dolly MLG - Installation / Removal Legacy EMB-550
DCM1596 Dolly NLG - Installation / Removal Legacy EMB-550
TMH SD06 MLG Handling Trolley See data sheet

Wheel & Brake Dolly

———————————————————————————————————–——–
Model Number Description Applicable Aircraft
——————————————————————————————————————
G601R324001-1 Dolly - Wheel & Brake Installation / Removal CRJ200 / CL-850

DCM1538 Dolly - Wheel & Brake Installation / Removal CL-300, 600, 601, 604, 605
CRJ700, 900, GX, Q100, Q200
Q300, Q400

TMH 550 Servicing Trolley - Wheels / Jacks / Nitrogen All types of aircraft except B777
Bottle / filling station

TMH RD04 Wheel Change Dolly R/I See data sheet


TMH RD21 Wheel Brake Trolley - handling See data sheet
TMH RD34 Towable Wheel dolly - R/I See data sheet

TMH RD54 Aircraft Wheels Transport Dolly A300, A310, A318, A319,
A320, A321, A330, A340,
A350, A380, B737, B747,
B757, B767, B777, B787

TM200 Wheel Lift Airbus & Boeing

Copyright 2016, DCM Aerospace, All Rights reserved


42
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

LIGHTS (ATA-33)

Landing Light Adjustment Tool

———————————————————————————————————–——–
Model Number Description Applicable Aircraft
——————————————————————————————————————
F80179-1 Light Adjustment Tool Retractable Boeing 737 all models
Landing light

G600-330001-1 Tool Wing Landing Light Alignment CL-605


G601R330001-1 Spare Bulbs Kit CRJ200
G601-330001-51 Tool Nose Landing Light Alignment CL-605
G601R334101-1 Alignment Tool - Landing Light CRJ200
G601R334102-1 Alignment Tool - Landing and Taxi Light CRJ200
GSB3340001 Tool inboard landing light alignment Q100 / 200/ 300/ 400
GSB3340002 Tool outboard landing light alignment Q100 / 200/ 300/ 400

F80179-1 G600-330001-1

Copyright 2016, DCM Aerospace, All Rights reserved


43
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

NAVIGATION (ATA-34)

Breakout Box Equipment - Line Maintenance

———————————————————————————————————–——–
Model Number Description Applicable Aircraft
——————————————————————————————————————
A34011-1 / -112 B.O.B. Equipment - ARINC 600 737 all models, 767
A34011-119 / -165 B.O.B. Equipment - ARINC 600 767
A34016-xxx B.O.B. Equipment - ARINC 600 737 all models, 767, 777, 787
B34002-xx B.O.B. Equipment - ARINC 404 737 all models
G604-340003-1 Kit ARINC 429 Cable CL-605
G601R340002-1 Kit ARINC 429 Cable CRJ200
J34001 B.O.B. Line Maintenance 777
J34002-19 Test Fixture AOA 787

Extender Box - Radio Altimeter Receiver Transmitter

———————————————————————————————————–——–
Model Number Applicable Aircraft
——————————————————————————————————————
C34005-1 Boeing 737 all models, 767, 777
C34005-16 Boeing 737-600/ -700/ -800/ -900, 787

Copyright 2016, DCM Aerospace, All Rights reserved


44
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

PNEUMATIC (ATA-36)

Pre-cooler Equipment - Removal / Installation

———————————————————————————————————–——–
Model Number Application Applicable Aircraft
——————————————————————————————————————
A36001-1/-24/-44/-45 Boeing 767
A36022-1 RB211 Boeing 767
C36003-xx LEAP-1B Boeing 737-8
C36004-xx LEAP-1B Boeing 737-8
C36005-1 Boeing 737-8
J36001-102 Trent 800 Boeing 777
J36002-338 PW Engines Boeing 777
J36004-1 PW4084 Boeing 777
J36006-1 GE90 Boeing 777
J36020-1 GE90 Boeing 777

Copyright 2016, DCM Aerospace, All Rights reserved


45
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

WATER WASTE (ATA-38)

Vacuum Waste System

———————————————————————————————————–——–
Model Number Applicable Aircraft
——————————————————————————————————————
A38001-68 Boeing 737-600 / -700 / -800 / -900, 787
A38001-65 Boeing 787
A38007-9 737-600 to –900, 767, 777, 787
K38001-1 787

Vacuum Toilet - Blockage Removal Tool


A38003-20
————————————————————————————————–—————-
Model Number Applicable Aircraft
———————————————————————————————–——————-
A38003-20, -30 737-600 to 737-900, 767, 777, 787

Drain Mast Plug - Water Waste

C38001-23
———————————————————————————————————–——–
Model Number Description Applicable Aircraft
——————————————————————————————————————
C38001-23 Drain Plug Water Waste 737 all models, 767, 777
G601R381002-13 Blanking Plug Drain Mast CRJ200
G601R381001-1 Adapter Potable Water CRJ200
G700-381001-1 Adapter Potable Water Global Express
G700-381201-1 Drain Plug Water System Global Express
TMH GG16 Water Drain Pump All aircraft

Test Cable - Potable Water Quantity Transmitter

———————————————————————————————————–——–
Model Number Applicable Aircraft
——————————————————————————————————————
A38010-1 Boeing 767, 777
A38010-11 Boeing 737-600 to –900, 767, 777
A38010-45 Boeing 737 all

Copyright 2016, DCM Aerospace, All Rights reserved


46
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

WATER WASTE (ATA-38)

Vacuum Lavatory System - Tool Blockage Removal

———————————————————————————————————–——–
Model Number Applicable Aircraft
——————————————————————————————————————
G38004-13 737-600 to –900, 767, 777

Vacuum Waste System - Tool Blockage Removal

————————————————————————————————–—————
Model Number Applicable Aircraft
————————————————————————————————–—————
G38006-1 737-600 to –900, 767, 777

Copyright 2016, DCM Aerospace, All Rights reserved


47
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

AIRBORNE AUXILIARY POWER (ATA-49)

Cradle APU & Hoist Equipment (Removal & Installation)

———————————————————————————————————–——–
Model Number Description Applicable Aircraft
——————————————————————————————————————
A49001-83 Cradle APU 757, 767
A49001-84 Cradle APU 757, 767
A49001-17 Cradle APU 757, 767
A49003-12 Transportation Dolly - APU 757, 767
A49005-12 Sling APU Shop Handling 757, 767
C49003-1 Cradle APU Sundstrand - Hoist 737
C49004-36 Sling APU - 737
GTCP85-129 Garrett
GTCP 36-280 Garrett
APS 2000 Sundstrand

C49004-37 Sling APU - 737


GTCP 85-129 Garrett
APS 2000 Sundstrand

C49004-38 Sling APU - GTCP 36-280 Garrett 737


C49004-39 Sling APU - APS 2000 Sundstrand 737
C49004-40 Sling APU - 131-9B Allied Signal 737
C49010-50 Cradle Assembly - AE 131-9B APU 737-600 to –900
C49012-1 Equipment - Removal & Installation Exhaust 737-8
G600-490002-1 Sling APU - Removal & Installation CL-600
G601R491001-1 Sling APU - Removal & Installation CRJ
G604-490001-77 Sling APU - Removal & Installation CL-605
F80002-24 Cradle & Hoisting Ass’y - APU 737
F80114-25 Cradle & Hoisting - Garrett APU 737
J49006-67 Cradle APU 777
J49007-29 Dolly Transportation APU 777
K49004-1 Hoist Equipment - Inst’l / Removal 787
TMH RD45-00-00 APU Transport Dolly A319/ A320 / A321
TMH SD59-00-00 APU Removal / Installation Dolly A330 / A340
TMH SD70-00-00 APU Maintenance Dolly C135

Copyright 2016, DCM Aerospace, All Rights reserved


48
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

AIRBORNE AUXILIARY POWER (ATA-49)

Lifting Eye - Generators & Starters

————————————————————————————————–—————
Model Number Applicable Aircraft
————————————————————————————————–—————
A49002-1 757, 767-200 & 767-300
(Helicoil Inserts)

A49002-2 757, 767-200/-300/-400, 737-600 to –900, 777, 787


(Stainless steel Armored Inserts)

Thread Protectors - APU

————————————————————————————————–—————
Model Number Description Applicable Aircraft
————————————————————————————————–—————
C49006-1 Thread Protector - APU Mount Bolts 737-600 to –900
G49007- 5 Thread Protector - APU Retention Bolts 747, 777
K49001-7 Thread Protector - APU Retention Bolts 787

Copyright 2016, DCM Aerospace, All Rights reserved


49
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

DOORS (ATA-52)

Door Seal Installation Tool

————————————————————————————————–—————
Model Number Applicable Aircraft
————————————————————————————————–—————
B52004-1 707, 727, 737 all models, 747, 757, 767
K52011-1 787

Various Tools - See Aircraft Specific ITEM)

Copyright 2016, DCM Aerospace, All Rights reserved


50
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

NACELLES (ATA-54)

Sling Equipment

————————————————————————————————–—————
Model Number Description Applicable Aircraft
————————————————————————————————–—————
ACS87002-1 Sling - Inlet Cowl CRJ700 / 900

A54003-1 Sling - Strut Removal & installation P&W Engine 767

A54003-41 Sling - Strut Removal & Installation GE CF6-80A Engine 767

A54003-42 Sling - Strut Removal & Installation GE CF6-80C2 Engine 767

A54012-1 Sling - Strut Removal & Installation RR RB211-524H Engine 767

B71040-39 Sling - Inlet Cowl


CFM56-7 737-600 to –900
RB211-524G & RB211-524H 747
RB211-535C & RB211-535E4 757
RB211-524H 767

C54001-37 Sling - Strut Removal & Installation 737-300/ -400/ -500

C54011-59 Sling - Strut Removal & Installation GE CFM56-7 Engine 737-600 to –900

C54016-xx Sling - Strut Removal & Installation CFM LEAP Engine 737-8

C54019-xx Sling - Fuse Pin R/I CFM56-7 737-8

C54021-xx Sling - Fuse Pin R/I LEAP 737-8

G600-540001-1 Sling - Nose Cowl Removal & Installation CL-605

G601R541101-1 Sling - Nose Cowl Removal & Installation CL-605 / CRJ

J54002-85 Sling - Strut Removal & Installation PW Engine 777

J54003-1 Sling - Strut Removal & installation GE Engine 777

J54003-2 Sling - Strut Removal & Installation RR Engine 777

K54004-43 Sling - Installation / Removal Engine Pylon 787

Copyright 2016, DCM Aerospace, All Rights reserved


51
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

STABILIZER (ATA-55)

Sling Equipment

C55010-33
————————————————————————————————–—————
Model Number Description Applicable Aircraft
————————————————————————————————–—————
A07007-33 Vertical Fin Installation & Removal 767
C27003-38 Rudder Installation & Removal 737-200, 737-300 to –500
C55001-1 Elevator Installation & Removal 737-200 / -300
C55004-1 Vertical Fin Installation & Removal 737-100 to –500
C55010-1 Vertical Fin Installation & Removal 737 all Models
C55010-56 Vertical Fin Installation & Removal 737-8
C55014-1 Horizontal Stab. Installation & Removal 737-8
F70172-1 Horizontal Stab. Installation& Removal 707 S/N 2001 +
F70172-2 Horizontal Stab. Installation & Removal 707 S/N 1 to 1999
F70298-1 Vertical Fin Installation & Removal 707
F70307-1 Elevator Installation & Removal 707, 720
F80006-1 Horizontal Stab. Installation & Removal 737-100 / -200
F80006-2 Horizontal Stab. Installation & Removal 737-100 / -200
F80006-51 Horizontal Stab. Installation & Removal 737-100 / -200
F80006-52 Horizontal Stab. Installation & Removal 737-300 / -400 / -500
F80006-54 Horizontal Stab. Installation & Removal 737-300 / -400 / -500
F80006-67 Horizontal Stab. Installation & Removal 737-100 / -200
F80025-30 Rudder Installation & Removal 737-100 / -200
F80035-18 Vertical tail installation & Removal 737-200/ -300/ -400/ -500
G601R551000-1 Horizontal Stab. Installation & Removal CRJ
G670-274001-101 Horizontal Stab. Installation & Removal CRJ700
J55004-1 Horizontal Stab. Installation & Removal 777
J55005-1 Vertical Fin Installation & Removal 777-200/ -300
J55005-32 Vertical Fin Installation & Removal 777-200/ -300/ -200LR/-200F/
777-300ER

K55001-1, -55 Horizontal Stab. Installation & Removal 787


K55005-1, -87 Vertical Fin installation & Removal 787

Copyright 2016, DCM Aerospace, All Rights reserved


52
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

WINDOWS (ATA-56)

Sling Equipment

————————————————————————————————–—————
Model Number Description Applicable Aircraft
————————————————————————————————–—————
A56001-15 Sling set - # 1 & 3 Control Cabin Windows 757-200, 767

G600-561101-1 Windshield & Side Window Removal CL-600/ 604/ 605


Global Express

G601R561102-1 Windshield & Side Window Removal CRJ/ CRJ700/ CRJ900

K56001-38 Sling Set - # 1 & 2 Control Cabin Windows 787

G600-561101-1 K56001-38

Copyright 2016, DCM Aerospace, All Rights reserved


53
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

WINGS (ATA-57)

CONTOUR BOARDS

Flap Profile Check Board

————————————————————————————————–—————
Model Number Applicable Aircraft
————————————————————————————————–—————
G600-570019-1 CL-600

G700-575101-1 Global Express

Wing Leading Edge

————————————————————————————————–—————
Model Number Applicable Aircraft
————————————————————————————————–—————
TN059536 Lear 23, 24, 25, 28, 31, 35, 55

TN455401 Lear 40, 45

TN504699 Lear 23 to 60XR

Winglet
————————————————————————————————–—————
Model Number Applicable Aircraft
————————————————————————————————–—————
C57002-xx B737-8 Sling Equipment R/I Winglet
C57006-1 B737-8 Holding Fixture Winglet

Copyright 2016, DCM Aerospace, All Rights reserved


54
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

PROPELLERS (ATA-61)

————————————————————————————————–—————
Model Number Description Applicable Aircraft
————————————————————————————————–—————
TMH BS12-00-00 Blade Lifter (same as GS20871-1) ATR42/72
(valid only for “14SF” type )

TMH SD18 Transport storage Dolly R/I Blades ATR42/72


Propeller support PW120 / 124

TMH SD38 Transport storage dolly R/I Blades ATR42/72


Propeller support PW120 / 124

Copyright 2016, DCM Aerospace, All Rights reserved


55
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

POWER PLANT (ATA-71)

Engine Lifting Slings

————————————————————————————————–—————
Model Number Description Applicable Aircraft
————————————————————————————————–—————
ACS87002-1 Sling - Inlet Cowl CF34-8C5 CRJ700 / 900
B71040-39 Sling - Inlet Cowl ----------
CFM56-7 737-600 to –900
RB211-524G & RB211-524H 747
RB211-535C & RB211-535E4 757
RB211-524H 767

A01-1133-1 Sling Engine Power Plant - GE CF-34-8C5 CRJ700/900


A71008-64 Sling Equipment - PW JT9D-7R4D Engine 767
A71008-65 Sling Equipment - PW4000 Engine 747, 767
C71004-1 Sling - Inlet Cowl GE CFM56-3 737-300/-400/-500
C71015-83 Sling Engine - Overhead Shop Handling -----------
GE CFM56-3 737-300/-400/-500
GE CFM56-7 737-600 to –900

C71026-1 Sling - Fan Cowl GE CFM56-7 Engine 737-600/-700/-800


C71027-1 Frame Equipment. - Inlet Cowl 737-600 to –900
C71031-1 Sling Assembly—Fan Cowl, LEAP-1B 737-8
C71033-xx Installation / Removal Frame Assembly Inlet Cowl 737-8
C71039-xx Engine Sling Equipment - Overhead Shop 737-8
C71041-xx Unlock Pole - Fan Cowl Hold Open Rod 737-8
G601-710008-157 Sling Engine Power Plant - CF34 CRJ/ CL604/ CL605
G215-710021-1 Sling Engine (Tilt-Arc) CL-215
G71007-28 Sling - Inlet Cowl GE CF6-80C2B 747-300/-400, 767-200ER
767-300 / 767-300ER

G71010-79 Sling Engine Handling GE CF6-80A & CF6-80C2B 747, 767


G71010-80 Sling Engine Handling GE CF6-80C2B 747, 767
G71010-81 Sling Engine Handling GE CF6-80A 767
G71010-82 Sling Engine Handling GE CF6-50 747
G71013-1 Sling - Fan Cowl GE CF6-80C2B 747
G71030-1 Sling - Nose Cowl R.R RB211-524 & GE CF6-50 747, 767-300ER
G71032-1 Sling - Inlet Cowl R.R. RB211-524 & GE CF6-50 747, 767
J71001-66 Sling - Inlet Cowl - PW, RR, GE Engines 777, 787
J71004-9 Sling - Fan Cowl - PW, RR, GE Engines 777
J71015-18 Sling - Fan Cowl Support Beam PW & GE90 777
K71008-37 Sling - Fan Cowl Support Beam GE GENx 787
K71009-36 Sling - Fan Cowl RR Engines 787
K71009-41 Sling - Fan Cowl GE Engines 787
TMH BS09 Sling - Inlet & Fan Cowl CFM56 A320
TMH BS29-00-00 Sling - R/I Mixer CFM52-5C See OEM Item
TMH BS31-00-00 Sling - Engine Handling CFM56-5 & V2500 A320

Copyright 2016, DCM Aerospace, All Rights reserved


56
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

POWER PLANT (ATA-71)

Bootstrap Lifting Device - Engine


Installation & Removal
Used to install and remove the engine / power plant.

————————————————————————————————–—————
Model Number Applicable Engine Applicable Aircraft
————————————————————————————————–—————
A1-24001-1 GE CF-34 CRJ
TMH BS01 see data sheet A300 / A310
TMH BS02-00-00 PW120 / PW124 / PW125 ATR42 / 72
A71001-191 PW JT9D-7R4D 767
PW4056-4060

A71011-262 GE CF6-80A 767


A71011-263 GE CF6-80C2B 767
A71047-150 RR RB211-524H 767
C71003-247 GE CFM56-3 737-300/ -400/ -500
C71020-91 GE CFM56-7 737-600/ -700/ -800/ -900
C71029-xx LEAP-1B 737-8
C71030-1 Fixture Proof Load - LEAP-1B 737-8
J71005-73/ 74/ 84/ 85 PW Engine 777
G71029-90 RR RB211 747
J71009-68 / -69 RR Trent 800 777
J71043-89 GE GE90 777
K71001-143 GE GEnx 787
K71002-116 /-141 RR Trent 1000 787
CG9000033-0001 PW 1500-G CS100 / CS300

Copyright 2016, DCM Aerospace, All Rights reserved


57
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

POWER PLANT (ATA-71)

Utility Crane & Engine Installation / Removal

A01-1784-1
The DCM mobile crane has been designed to remove and install engines on any Regional Jet or busi-
ness aircraft. Its manoeuvrability and ease of operation allow for more efficient aircraft maintenance.
The legs of the crane surround the transporter stand during engine pick-up, thus saving working space.
The boom of the crane can be lowered to facilitate transportation on a flat bed truck.

STANDARD FEATURES

Model : DCM A01-1784


Rated Capacity: 3,080 Lbs. @ 22 Feet Max.
Mobile unit: 24 Volts DC / 510 AMP Rechargeable Battery
Mobile Unit : «EE Rated »
Gross Weight : 4,500 Lbs.
Casters 10 Inch dia.: With lock and brake (4)
Maximum speed: 3 MPH.

DIMENSIONS
HOIST:
Height Boom Up: 26 feet
Height Boom down: 115 inches Manufacturer: Vulcan
Width: 107 inches (Modified by DCM)
Length Boom down: 350 inches Model: A01-1784-440
Distance between (2) legs: 90 inches Chain Length: 25 feet
Speed of the hoist: Variable 0-8 feet /
Depth between (2) legs: 112 inches min.
Transversal displacement: +/- 6”
Longitudinal displacement: +/- 6”

MOBILE UNIT
Model: Crown TR3560
(Modified)
Batteries (Rechargeable) 24 volts DC; 510
AMP.
Consuming time : 5 hours
(continuous use)
Charging time: 8 hours
Cooling time: 4 hours
Certified: EE Rated
Travel speeds “Loaded”: 3 mph.
Battery charger: Include

Copyright 2016, DCM Aerospace, All Rights reserved


58
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

POWER PLANT (ATA-71)

Engine Stand & Engine Cradle

————————————————————————————————–—————
Model Number Description Applicable Aircraft
————————————————————————————————–—————
C71008 Engine Cradle / Dolly GE CFM56-3 737-300/ -400/ -500

A71006-79 Engine Cradle - Pratt & Whitney,


JT9D-7R4D 767
PW4056 767
PW4256 747-400

A71023-53 Engine Cradle - GE CF6-80A, 90 inch rail 767

F80062-55 Transportation / Assembly Dolly - JT8D 737

G215-710009-1 Engine Dolly - (CL-215 Only) CL-215

G601-710004-101 Stand Engine Power Plant Transportation CF34 CRJ / CL604 / CL605

G601-710006-101 Stand Engine Power Plant build up CF-34 CRJ / CL604 / CL605

G601-710007-101 Stand Engine Power Plant Rest CF-34 CRJ / CL604 / CL605

G71002-48 Engine Cradle - GE CF6-80C2B 747, 767

G71015-75 Engine Cradle - RB211-524G & RB211-524H 747, 767

TMH EC03-00-00 Engine Cradle - PW120 series ATR42/72

TMH EC05-00-00 Engine Cradle - CFM56-5C2 A340-200 / A340-300

TMH EC07 Engine Cradle - CF6-80C2 / E1, 90 inch rail A300 / A310 / A330
Associated to TMH ET06-20-00 & TMH ET06-10-00

TMH EC08-00-00 Engine Cradle - CF6-80C2, 90 inch rail - I Beam A300/ A310

TMH EC11 Engine Cradle - PW4168, 90 inch rail - I Beam A330

TMH EC14 Engine Cradle - CF6-50, 90 inch rail - I Beam A300

TMH EC17 Engine Cradle - Trent 700, 118 inch rail A330

TMH EC22 Engine Cradle - 90 inch I Beam See Data sheet


JT9D-7 All series
& PW4000 All series

Copyright 2016, DCM Aerospace, All Rights reserved


59
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

POWER PLANT (ATA-71)

Engine Stand & Engine Cradle

————————————————————————————————–—————
Model Number Description Applicable Aircraft
————————————————————————————————–—————
TMH EC27 Engine Cradle - CFM56-3 B737-300 to -B737-500
CFM56-5 (-5A/ -5B/ -5C) A318/ A319/ A320/ A321/ A340
IAE V2500 A319/ A320 / A321

TMH EC28 Engine Cradle - CFM56-5, 90 inch I Beam A318/ A319/ A320/ A321

TMH EC29 Engine Cradle - IAE V2500, 90 inch standard A320


Associated to TMH ET06-10-00 & TMH ET06-20-00

TMH EC37-00-00 Engine Cradle - Rolls Royce Trent 500 A340


TMH EC37-00-00 Engine Cradle - Rolls Royce Trent 700 A330

TMH ET06 Engine Trolley - 90 inch rail -


Associated engines Cradles - TMH EC05, EC07, EC10, EC11, EC12, EC13, EC28, EC29

TMH ET07 Engine Trolley - Suitable for all I Beam 90 inch cradles / adapters
TMH ET07-10-00 - Single Steering
TMH ET07-20-00 - Double Steering

TMH ET09 Fly Away Stand - Suitable I Beam 90 inch cradle / adapters
(Engine Transportation / Engine Storage)

TMH ET10 Engine Trolley - Suitable for all “I” beam 118 inch cradle / adapters Trent 700 Engine
(Engine Ground Transportation / Storage)
TMH ET10-50-00 - Double Steering
TMH ET10-60-00 - Single Steering

TMH ET13 Engine Trolley - Suitable for all “I” Beam 118 inch cradle / adapters Trent 700 Engine
(Engine Ground Transportation / Storage)

TMH SD16 Working Stand - CFM56 Engine

TMH SD53-00-00 Inlet Dolly - C135 AWACS

TMH SD69 R/I of Nozzle & Center Body - CFM56-5A/5B A318/ A319/ A320/ A321

Copyright 2016, DCM Aerospace, All Rights reserved


60
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

POWER PLANT (ATA-71)

Lift Fixture Engine Accessory

Model # A71015-108

Use on Aircraft Models:

Boeing 737-600 to –900


Boeing 747
Boeing 757
Boeing 767
Boeing 787

USAGE

To support engine accessories in conjunction with the following adapters:


RB211 & CF6-50 USE 2ME65B89603 757/767 use A71013 for IDG except 767-400

JT9D-3 & -7 USE 69ME65B00713 747/767 use A78003 for exhaust nozzle.

JT9D-7Q USE 69ME65B00713 Plus 757/767 use A21001 for A/C Pack and heat
PWA28941 (Fuel Pump / Control) exchanger.
737 Use C21005 for A/C Pack.

Weight And Dimensions:

Weight (Excluding Box) : 400 lbs.

Dimensions (Excluding Box): 30” x 50” x 90”

Copyright 2016, DCM Aerospace, All Rights reserved


61
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

POWER PLANT (ATA-71)

Dynamometer - Load Cell

————————————————————————————————–—————
Model Number Description
————————————————————————————————–—————
30006-0050 5000 lbs Capacity; 5” dial
30006-0068 6000 Lbs Capacity; 5” dial
30006-0092 15000 lbs Capacity; 5” dial
30007-0042 4000 lbs Capacity; 10” dial
30007-0059 5000 lbs Capacity; 10” dial
30007-0125 2000 KG Capacity; 10” dial
30784-0017 30000 lbs Capacity; 10” dial

ENGINE ROTATION TOOL (ATA-72)

Engine Rotation Tool

Usage:

Used for an accurately controlled rotation of the


engine compressor/turbine during boroscopic
checking.

————————————————————————————————–—————
Model Number Description Applicable Aircraft
————————————————————————————————–—————
TMH DI27 Engine Rotation Tool See Data sheet

Copyright 2016, DCM Aerospace, All Rights reserved


62
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

EXHAUST (ATA-78)

Hand Pump - Opening system Thrust Reverser


To supply hydraulic pressure to the actuator that opens the
thrust reverser “C” ducts for engine maintenance.

————————————————————————————————–—————
Model Number Applicable Aircraft
————————————————————————————————–—————
A78019-29 737-300 to –900, 747, 757, 767 (Except RB211) , 777 GE90 (with Custom
Option # 7200-000482), 787 (Genx & Trent 1000)

C78005-26 / -53 737-300 to –900, *** 747 (CF6 & PW4000 engines only), 757, 767, 787

DCM1493 / (AM1986) ERJ170 / 175 / 190 / 195

TMH GA13-20-00 Cowl Door Opening Unit

TMH GA17-10-00 Cowl Door Opening Unit - Tank Capacity 1 L


TMH GA17-20-00 Cowl Door Opening Unit - Tank Capacity 4 L
TMH GA17-30-00 Cowl Door Opening Unit - Tank Capacity 10 L

TMH GA17 TMH GA13-20-00

Copyright 2016, DCM Aerospace, All Rights reserved


63
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

EXHAUST (ATA-78)

Hold Open Equipment Thrust Reverser


Used to hold open the Trust Reverser during engine maintenance.

————————————————————————————————–—————
Model Number Description Applicable Aircraft
————————————————————————————————–—————
C78001-13 Hold Open Rod - CFM56-3 Engine T/R 737-300
C78012-14 Hold Open Rod - CFM56-3 T/R Cowl 737-300/ 400/ 500
(See ITEM for 737-300 applicable notes)

C78019-15 Hold Open Eqpt. - CFM56-7 T/R Cowl 737-600 to –900

C78031-1 Hold Open Eqpt. - LEAP-1B T/R Cowl 737-8


C78033-xx Hold Open Eqpt. - LEAP-1B T/R Cowl 737-8

G78002-1 Hold Open Set - CF6-80C2B T/R Cowl 747 / 767

K78005-22 Hold Open Eqpt. - RR Thrust Reverser 787


K78009-1 Hold Open Eqpt. - GE Thrust Reverser 787

TMH TRSV.01F78AH Hold Open Rod - Trent 500 A340-500 / -600

CG9000051-0001 Hold Open Device - T/R CS100/ CS300

Brace Hold Open

————————————————————————————————–—————
Model Number Description Applicable Aircraft
————————————————————————————————–—————
TMH BS10 Brace Hold Open Cowls CFM56-5 A318/ A319/ A320 / A321 - CEO

TMH BS10-10-00 Brace Hold Open Cowls CFM56-5 A320

This tool replaces S587BHO, S587-1BHO, S587-2BHO

TMH BS13-00-00 Brace Hold Open Cowls -V2500 A320

TMH BS17-00-00 Brace Hold Open Cowls - CFM56 A340

TMH BS19 Brace Hold Open Cowls - CF6-80E1 A330

TMH BS58 Brace Hold Open Cowls - CF6-80C2 A300 / A310


This tool supersedes 98A71101506001

TMH TRSV.01F71AC Brace Hold Open - Trent 500 A340-500/ -600

Copyright 2016, DCM Aerospace, All Rights reserved


64
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

STARTING(ATA-80)

————————————————————————————————–—————
Model Number Description Applicable Aircraft
————————————————————————————————–—————
G1008011029-001 Air Start Adapter - GSE CL-300

15MIT65B00717 Wrench - Pylon Valve manual drive 747

G71021-16 Drive Extension - Starter Valve and 767


Pressure Regulating & Shutoff Valve

G71021-16

Copyright 2016, DCM Aerospace, All Rights reserved


65
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Worldwide Licensed Manufacturer - GSE.

————————————————————————————————–—————
Aircraft Models Description
————————————————————————————————–—————

Challenger All Bombardier Proprietary GSE

Global Express All Bombardier Proprietary GSE

CRJ All Bombardier Proprietary GSE

CRJ Next Gen All Bombardier Proprietary GSE

Q Series All DeHavilland Proprietary GSE

C Series All Bombardier Proprietary GSE

Amphibious Aircraft All Bombardier Proprietary GSE

Copyright 2016, DCM Aerospace, All Rights reserved


66
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

C Series
CS100 - CS300

————————————————————————————————–—————
Part Number Description
————————————————————————————————–—————
CG9000023-0001 Kit Hydraulic Fluid Sampling
CG9000024-0001 Water Waste Tank Removal SGSE
CG9000029-0001 HSTA Hoisting Bracket
CG9000030-0001 T/R Hold Open Rod Assembly
CG9000031-0001 Aft Equipment Bay Platform - Interior
CG9000032-0001 Escape Slide Protection Mats
CG9000033-0001 Engine Bootstrap kit
CG9000034-0001 Picketing Kit
CG9000036-0001 Mid– Avionic Boxes Removal Kit
CG9000037-0001 EPC Removal / Installation Tool
CG9000038-0001 Fuel Inerting Kit
CG9000039-0001 Decode ELT Signals
CG9000040-0001 Fidex Lifting Adaptor
CG9000041-0001 Fishnet SGSE
CG9000043-0001 Kit NLG Door Rigging
CG9000044-0001 Fidex Test Kit
CG9000045-0001 IRS Alignment Kit
CG9000047-0001 Fuel Lines Pressure and Obstruction Kit (Not Supplier provided)
CG9000050-0001 Wheel Bin Removal GSE
CG9000051-0001 T/R Primary Hold Open Device
CG9000053-0001 T/R Hold open Shop Air Bootstrap
CG9000054-0001 Jacking Pad Kit
CG9000054-0007 Jacking Pads - Nose
CG9000054-0009 Jacking Pads - Wing
CG9000055-0001 Flap Hinge Bushing Tooling
CG9000056-0001 Cover - Fuel Drain Mast
CG9000057-0001 NACA Plugs - ECS Intake
CG9000058-0001 NACA Plugs
CG9000059-0001 Plug - ESC Exhaust
CG9000060-0001 HP Pipe Leakage Tester (June 2015)
CG9000061-0001 Cover - MLG Wheel Assembly
CG9000062-0001 Cover - NLG Wheel Assembly
CG9000063-0001 Tool Fuel Drain Valve Removal
CG9000064-0001 Kit - Fuel / Vent Lines Shroud Leak Test
CG9000065-0001 Kit - Leak Test Shroud and drain Lines
CG9000066-0001 Fire Loop Removal / Installation Tool
CG9000069-0001 Cover - TAT
CG9000070-0001 Fuel Vent Blanking Plug

Copyright 2016, DCM Aerospace, All Rights reserved


67
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

C Series
CS100 - CS300

————————————————————————————————–—————
Part Number Description
————————————————————————————————–—————
CG9000071-0001 Cover - Louver Panels
CG9000072-0001 Cover - Case Drain Guide Vane
CG9000074-0001 Pylon Removal / Installation Sling
CG9000095-0001 Kit Rudder Rigging
CG9000096-0001 Kit Rigging Pin
CG9000099-0001 Elevator Pointer Kit
G600-200014-17 Bonding Equipment Tester (120V)
G600-200014-19 Bonding Equipment Tester (230V)
G601R280001-1 Kit - Breathing Apparatus
G601R284102-1 Kit - Hydrometer and Cylinder
C01518150-RFIX02-0001 Door Mechanism Rigging Pin
C01518150-TFIX01-0001 Fixture, Rigging PAX Door Mechanism
C01518150-TFIX04-0001 Inner Handle Load Adapter
C01518150-TFIX05-0001 Adapter Handle Mode select
C01550000-TFIX01-0001 Fixture Rigging Mechanism Cargo Door
C01570000-RFIX03-0001 Fixture Shaft Cam Rigging
C01570000-RFIX04-0001 Fixture Rigging Mechanism Oweed
C01570000-TFIX01-0001 Mechanism Rigging Fixture
C01570000-TFIX03 Fixture Rigging Mechanism Oweed
C01570000-TFIX05-0001 Mechanism Rigging Fixture
C02040910-SFIX01-0001 Tool Horizontal Stab Holding
C500-522111-TFIX01-0001 Oweed Dummy Actuator
GT9910014-GT0001-0010 Spring Compressor FPD - FSD - ASD- Doors
GT9910014-GT0001-0015 Spring Compressor FPD- FSD - ASD Doors
GT9910014-GT0001-0020 Spring Compressor FPD - FSD - ASD Doors
GT9910014-GT0001-0025 Spring Compressor FPD - FSD - ASD Doors
GT9910014-GT0001-0030 Spring Compressor FPD - FSD - ASD Doors
GT9910014-GT0001-0035 Spring Compressor FPD - FSD - ASD Doors
GT9910014-GT0001-0040 Spring Compressor FPD - FSD - ASD Doors
GT9910014-GT0001-0045 Spring Compressor
GT9910014-GT0001-0050 Spring Compressor
GT9910014-GT0001-0055 Spring Compressor
GT9910014-GT0001-0060 Spring Compressor
GT9910014-GT0001-0065 Spring Compressor
S500-213001-TFIX03-0001 Pressuziration Blanking Kit
S500-271011-TFIX01-0001 Aileron Backlash Arm
S500-272011-TFIX01 Rudder Backlash Bar
S500-273011-TFIX01-0001 Backlash Check Tool
S500-344311-TFX01-0001 Attenuator TSS Antenna
S500-345011-TFIX01-0001 LOC Antenna Attenuator

Copyright 2016, DCM Aerospace, All Rights reserved


68
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Q SERIES Dash 8 - Q400

————————————————————————————————–—————
Part Numbers Description
————————————————————————————————–—————
DCM1176-1 Covers Main Wheel (Canvas) Option for 34 inch wheels

DCM1177-1 Covers Nose Wheel (Canvas)

ACS28001 Cover Engine Intake (DCM1178-1 / 8SC5016))

ACS28002 Cover Engine Exhaust (8SC5017)

ACS28001 Sling Lower Forward Cowl

ACS28004 Sling Forward Cowl

ACS28005 Stand Lower Forward Cowl Support / Transport

ACS28009 Hoist Lower Fower Cowl

ACS28010 Plug / Bung Oil Cooler Vent Scoop

ACS28013 Tool Oil Cooler Thermal Valve Removal

ACS28016 Lanyard Lower Forward Cowl

AOA100 Cover Angle of Attack Vane

G601R121605-1 Gaseous Test Panel

G601R324301-1 Kit Brake Bleeding

GSB0700007 Adapter Jack Pad

GSB0700017 Adapter Jack Pad - Wing

GSB0800001 Plumb Bob Leveling Aircraft

GSB0800003 Adapter Main Wheel Measuring

GSB0910008 Strap Towing Aircraft Recovery

Copyright 2016, DCM Aerospace, All Rights reserved


69
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Q SERIES Dash 8 - Q400

————————————————————————————————–—————
Part Numbers Description
————————————————————————————————–—————
GSB1000001 Warning Streamer (G601R100001-1) - Remove After Test

GSB1000002 Warning Streamer (G601R100001-2) - Remove Before Flight

GSB1000004 Wheel Chocks MLG & NLG

GSB1000018 Flashlight with batteries

GSB1000020 Pin NLG Ground Lock Door

GSB1000027 Flyaway Kit (Basic)

GSB1000028 Pin MLG Ground Lock Door

GSB1000029 Pin MLG Ground Lock

GSB1000031 Set Propeller Restraint

GSB1000032 Flyaway Kit - (APU Option)

GSB1000033 Covers Pitot Static

GSB1011007 Cover ECS Exhaust (Left & Right) Ref. 8SC5014-001 & 8SC5014-002

GSB1011008 Cover ECS Ram Air Duct (L/H) Ref. 8SC5013-001

GSB1011009 Cover ECS Ram Air Duct (R/H) Ref 8SC5013-002

GSB1210016 Strut Service Gauge

GSB1216005 Tool Tire Deflation

GSB1216008 Gauge Tire Servicing

GSB2000009 Digital Inclinometer

GSB2000016 Kit Optical Depth Micrometer

Copyright 2016, DCM Aerospace, All Rights reserved


70
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Q SERIES Dash 8 - Q400

————————————————————————————————–—————
Part Numbers Description
————————————————————————————————–—————
GSB2100006 Vacuum Pump

GSB2111004 Kit Techne Fluidized Bath (117V or 240V)

GSB2130002 Hose - Outflow Valve Test

GSB2700008 Kit Rigging Pin

GSB2700009 Tension Meter for Cables (20-200LBS)

GSB2715001 Tool Left Gear Tab Rigging

GSB2715002 Tool Right Gear Tab Rigging

GSB2715003 Tool Left Elevator Rigging

GSB2715004 Tool Right Elevator Rigging

GSB2715005 Tool Aileron Rigging

GSB2720001 Rudder Pedal Force Meter Fixture

GSB2733002 Rigging Fixture Control Column

GSB2733003 AOA Vane Rigging

GSB2750003 Flap Drive Adaptor

GSB2810001 Tool Fuel Drain Valve

GSB3240006 Tool Force Application

IM563 Socket NLG Axle Nut

IM963 Socket MLG Axle Nut

GSB3242004 Spin Up Tool

Copyright 2016, DCM Aerospace, All Rights reserved


71
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Q SERIES Dash 8 - Q400

————————————————————————————————–—————
Part Numbers Description
————————————————————————————————–—————
GSB3251006 Protractor NLG Steering Angle

GSB3340001 Tool Inboard Landing Light Alignment

GSB3340002 Tool Outboard Landing Light Alingment

GSB3351001 T Light Comparator

GSB3443003 Radio Altimeter Simulator

GSB5200001 Rigging Tool L/H AFT Baggage Door Latch

GSB5200002 Rigging Tool R/H AFT Baggage Door Latch

GSB5260001 Tool Airstair Door Gas Spring Installation

GSB5400001 Bar Pry

GSB7610003 Tool - PLA Rigging

Copyright 2016, DCM Aerospace, All Rights reserved


72
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

EMBRAER

Phenom 300 GSE


Worldwide Licensed Manufacturer

————————————————————————————————–—————
Model Number Description
————————————————————————————————–—————
AGE-05315-401 Adapters - MEAS Horizontal Tail Backlash

AGE-05271-401 Clamp Set Locking Control Surface

AGE-05422-401 Pins, Set Aircraft Cables Rigging

AGE-05468-401 Balancer Set Control Surface

AGE-05204-401 Straight Edge Symmetry Aircraft

AGE-05416-401 Device Pressure Test Brake

2317-S137-001 Wow Proximity Sensor Adjustment Device

AGE-05190-401 Extender Cards Set

AGE-05122-401 Protractor Control Surface Deflection

AGE-04890-401 Adapters - Set Jacking Aircraft

2317-T020-401 Jacking Device NLG Assembly

2117-T010-401 Locking Stay Installation Device Assembly

2617-T001-401 Free Fall System Rig

2317-T010-401 Pin Removal Device MLG

AGE-04914-401 Tow Bar Head

AGE-05491-401 Harness Assembly Stick Pusher Actuator

Copyright 2016, DCM Aerospace, All Rights reserved


73
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Worldwide Licensed Manufacturer - GSE

————————————————————————————————–—————
Aircraft Models
————————————————————————————————–—————
Boeing 737

Boeing 737MAX

Boeing 747

Boeing 767

Boeing 777

Boeing 787

Out of Production models

Boeing 707

Boeing 717

Boeing 727

Boeing 757

Douglas DC-8

Douglas DC-9

Douglas DC-10

McDonnell Douglas MD-11

McDonnell Douglas MD-80

McDonnell Douglas MD-90

Copyright 2016, DCM Aerospace, All Rights reserved


74
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Boeing 737-8 (Tools unique to)


Worldwide Licensed Manufacturer - GSE

————————————————————————————————–—————
Part Numbers Description
————————————————————————————————–—————
C10005-1 Cover, Engine Inlet - LEAP 1B
C10006-1 Plug EQPT - Engine Exhaust, LEAP-1B
C10007-1 PLUG EQPT - FAN REVERSER
C10008*** Mooring Equipment for NLG
R10009 *** Plug - APU Port, Assembly
C20004*** Boom Hoist - Engine Fire Bottle
J20009-50 Adapter - Load Positioner
F70207-151 Kit, Rigging Pins
C26008*** Installation/Removal Equipment - Cargo Fire Extinguisher Bottle
C26009*** Installation/Removal Equipment - Engine Fire Extinguisher Bottle
C26007*** Test Equipment - Compartment Overheat Detection Control, M237 Inline
C26010*** Cover - Warning Horn, APU Fire Detection
C27034-31 Sling Equipment - Elevator Removal/Installation
C27083-18 Rigging Bar - Elevator Tab
C27086-27 Spring Removal / Installation Equipment - Elevator Tab Mechanism Assy
C27091*** Lock Set - Flight Spoiler Actuator (Contains 8 Lock Assemblies)
C27095 *** Rigging Tool - Four Degree Speedbrake Lever Tool
C27092 *** Rigging Beam - Elevator Index Plate Installation
F80027 *** Lock Assembly - Horizontal Stabilizer
C32026 *** Downlock Equipment - NLG and MLG * Flyaway Equipment *
(Contains 3 Lock Assemblies)
C32055 *** Clamp Assy - Steering Cables, NLG
C32015-18 Puller Equipment - Fuse Pin, MLG Forward Trunnion Support
C32041-67 BUILDUP EQPT - NLG
C32054 *** Rmvl/Instl Equipment - Trunnion Pin, NLG
C36005-1 Sling - Precooler
C36006*** Test Equipment - Air Supply Control System
C36003*** Equipment - Removal/Installation, LEAP-1B Engine Precooler - Engine Off
C36004*** Equipment - Removal/Installation, LEAP-1B Engine Precooler - Engine On
J46002-16 Breakout Box - ARINC-600 Connector, Fiber Optic
J46002-17 Breakout Box - ARINC-600 Connector, Fiber Optic
C49012-1 Equipment - Instl/Removal, APU Exhaust
C53002-1 Removal and Installation Equipment - Tail Cone
C54016*** Rmvl/Instl Equipment - Engine Strut, CFM LEAP
C54017*** Aft Fairing - Removal & Installation
C54018-1 Alignment Equip - Eccentric Bushing, Engine Strut Side Link
C54019*** Sling Equipment - Fuse Pin R/I, CFM56-7
C54021*** Sling Eqpt - Fuse Pin Removal, CFM LEAP, Preload/Unload
C54022*** Rmvl / Instl - Fuse Pin
C55010-56 Sling Equipment - Vertical Fin

Copyright 2016, DCM Aerospace, All Rights reserved


75
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Boeing 737-8 (Tools unique to)


Worldwide Licensed Manufacturer - GSE

————————————————————————————————–—————
Part Numbers Description
————————————————————————————————–—————
C55014-1 Sling Equipment - Horizontal Stabilizer, Removal/Instl
C57002 *** Sling Equipment - Removal/Installation, Winglet
C57007 *** Dispatch Tool - Cover Plate, Winglet Lower Blade
C57006-1 Holding Fixture - Winglet
C71029 *** Bootstrap Equipment - LEAP-1B Engine
C71031-1 Sling Assembly - Fan Cowl, LEAP-1B Engine
C71032 *** Safety Screen - Personnel Barrier, LEAP-1B Inlet
C71033 *** Installation/Removal Frame Assembly - Inlet Cowl
C71035-1 Lanyard - Personnel Safety, Engine Maintenance
C71037-1 Support - Engine Anti-Ice Duct, LEAP-1B
C71038-1 Alignment / Thread Protector Equipment - Thrust Link
C71040*** Equipment - Torque, Engine Mount Bolts, LEAP-1B engine
C71041 *** Unlock Pole - Fan Cowl Hold Open Rods
C71036 *** Brace - Transportation, LEAP-1B Engine Forward/Aft Mounts
C20002 *** Hoist - Boom, Ground Based Thrust Reverser
C78031-1 Equipment - Hold Open, Thrust Reverser Cowl, 65 Degree
C78032-1 Equipment - Sling, Thrust Reverser, LEAP-1B
C78033 *** Equipment - Hold Open, Thrust Reverser Cowl, LEAP-1B
C78035-1 Assembly - Lock, Thrust Reverser Actuator, LEAP-1B (Contains 2 Locks)
C78036 *** Dolly - Thrust Reverser
C78037 *** Tool - Latching, Thrust Reverser C-Duct Halves
C78030-10 Gap Measurement Gauge - TRAS Locking Actuator
C78025 *** Tool - Thrust Reverser Actuator, Removal/Installation
C78034 *** Sling Equipment - Thrust Reverser Sleeve, LEAP-1B Engine
C71039 *** Engine Sling Equipment - Overhead Shop Handling
C71030-1 Fixture - Proofload, LEAP-1B Bootstrap
C07008-28 Restraint Equipment - Inboard and Outboard Trailing Edge Flap Tracks
***Recovery***

Copyright 2016, DCM Aerospace, All Rights reserved


76
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Boeing 787
Worldwide Licensed Manufacturer - GSE

————————————————————————————————–—————
Part Numbers Description
————————————————————————————————–—————
A09003-2 Lock Pin—Nose Gear Towing Lever
A10002-9 Pole—Removal / Installation, Pitot Static Probe Cover
A12001-15 Fuel Sampling Equipment
A20001-65 Long Hoist arm Ass’y
A20001-152 Boom Hoist Equipment—(400 lbs Capacity)
A20001-83 Short Hoist Arm Ass’y
A20006-32 Grommet Installation Set
A20011-76 / -141 Bushing Removal / Installation Kit—Landing Gear
A20012-10 / -11 Swatool Tool—Bearing
A21010-190 Vacuum tank—Pressure Relief Valve Test
A27092-110 Actuator / Deactuator Set - Proximity sensor
A27124-1 Force Equipment—Rudder Freeplay check
A32015-9 Installation / Removal Tool—Down Lock, MLG & NLG
A32066-1 Drain Equipment—Shock Strut, MLG & NLG
A32099-76 Spring Extender Equipment
A34001-4 Warning Equipment - (ATC), (DME), (VHF) Antenna and Drain Mast
A34016-2, -5, -8, -9, -21 Breakout Box Equipment - ARINC 600 Line Maintenance
-26, -35, -38, -42, -46-47, -59, -64, -180, -181-182, -183, -184, -185-186, -187, -188, -189
A38001-65, -68 Vacuum Test Equipment - Vacuum Waster System
A38003-20, -30 Blockage Remover - Vacuum Toilet
A38006-1 Tester - Toilet Vacuum
A38007-9 Plug—Vacuum Waste System
A38012-85, -86 Pump Equipment—Vacuum Lavatory System
A49002-2 Lifting Eye—Generators and Starters (CE)
A51002-1 Alignment Equipment - Airplane Structural repair
A52019-13 Driver Set - Hinge Pins, Large Cargo Door
A52020-1 Mandrel Equipment—Bearing Installation
A71015-108 Lift Fixture—Engine Accessory
A78019-29 Hand Pump - Opening System, thrust Reverser
B20004-21, -42 Leverage Adapter Equipment—Access Panel
B28005-27, -42 Pressure Plug Equipment - Fuel System
B32066-1 Roller Swaging and Removal Equipment—Bearing
B32070-1 Installation Kit—Bushings, NLG
C10004-1 Protective Cover—Vane Sensor AOA
C20001-1 Roller Swage—Bearing Installation, Elevator Tab Control Crank Ass’y
C28013-8 Protective Equipment - Protective Ring for wing Lower Panel Access Doors
C32009-1 Swaging Equipment—Oversize Nose Gear Bearing, Upper Drag Brace
C34005-16 Extender Box - Radio Altimeter Receiver Transmitter
C35001-27 Pressure Leak Test Equipment—Crew Oxygen System
F70199-25, -52 Inflation Tool - Tire
F70200-14, -18 Inflation Tool - Strut
F70284-1 Wear Gage Set - Ground Power Plug and Receptacle
F70328-1 Probe - Film Resistance Measuring
F71329 Leakage Tracing Device - Integral Tank Leakage Test

Copyright 2016, DCM Aerospace, All Rights reserved


77
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Boeing 787
Worldwide Licensed Manufacturer - GSE

————————————————————————————————–—————
Part Numbers Description
————————————————————————————————–—————
F72951-1 Water Manometer - Test Equipment
F80113-37, -50, -61, -64 Kit Roller Swage
-70, -88, -105
F80117-1, -10 Swage Assembly—Roller
F80118-1, -15, -27, -31 Kit Bearing Retention / Removal
-38, -42
F80205-1 Bearing Swaging Equipment
G21007-1 Air Flow Cup - Low / High Blow Test
G25010-98, -133, -167 Gantry Equipment - Passenger Seat
G28018-28, -31, -32 Test Equipment—Engine Fuel Feed Manifold
G38004-13 Blockage Removal Tool - Vacuum Lavatory System
G38006-1 Blockage Removal Equipment - Vacuum Waste System
G51002-1 Fall Protection - Overhead Personnel Support
G51003-1 Fall Protection - Overhead Personnel Support
G54020-1, -2 Sling Equipment - Strut Unload, Engine Removed (CE)
G71009-167, -207 Fixture - Proof Load, Bootstrap Equipment
G71038-1, -13 Unlock Pole Equipment - Fan Cowl Hold Open Rod
G71045-1, -2 Hoisting Equipment - Engine Change Kits
G71048-1 Thread Protector Equipment - Engine Mount and Thrust Link Bolts, GenX
G71051-1 Calibration Kit—Load Cell System (CE)
J10007-5, -59, -60 Weight Equipment—Dummy Engine (CE)
J20002-44, -59 Load Positioner - Engine Accessories, 250 Lbs Capacity (CE)
J20009-88, -108, -109, -110 Jacking Equipment - Hydraulic Telescoping (CE)
J24015-1 Pressure Test Equipment - Engine Generators
J26004-24, -28, -53, -54 Test Equipment - Squib, Fire Extinguishing System
J27024-47, -48, -65, -66 Sling Equipment - Rudder, Remv’l & Installation (CE)
J27052-1 Adapter - Side Gust Suppression Leak Test
J27076-10 Test Assembly - Pressure Switch, Nose Gear
J27079-31, -32, -38 Inspection Equipment - Elevator Freeplay
J28007-9, -11 Pressurization Equipment - Wing dry bay, Fuel Leak Detection
J28010-26, -96 Console - Shop Air Supply
J28011-1, -11, -205 Aux. Defueling Equipment—External Power ControlUnit
J32001-67, -68 Measuring Equipment - Brake Pedal
J32008-74 Puller Equipment - Brake Systems Pins, MLG
J32010-75 Puller Equipment - Wheel & Brake Sleeves, MLG Axles
J32011-3, -7 Downlock Equipment—NLG & MLG
J32012-18 Puller Equipment - Brake MLG
J32031-12 Protector Equipment - Axle MLG
J32032-22 Wrench Equipment - Wheel Retention Nut, MLG
J32036-57 Remv’l & Inst’l Equipment - Aft Trunnion Pin, MLG
J32052-1 Extension Bar - Functional Test, NLG Steering
J32060-1 Drain Equipment - Oleo Strut, MLG & NLG

Copyright 2016, DCM Aerospace, All Rights reserved


78
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Boeing 787
Worldwide Licensed Manufacturer - GSE

————————————————————————————————–—————
Part Numbers Description
————————————————————————————————–—————
J32065-1, -13 Alignment Pin - MLG Tow Fitting
J32067-85 Fixture—Functional Test, Landing gear Springs
J32092-1 Bushing Replacement and honing kit—MLG
J34002-19 Test Fixture - Angle of Attack
J38004-232 Pump Equipment - Vaccum Lavatory System
J46002-1, -2, -3, -4, -5 Fiber Optic Breakout Equipment - ARINC 600 Style Connectors
J51004-1 Vacuum Generator Test Equipment
J51005-1, -7 Installation / Removal Adapter, Fuselage Drain Valve
J54005-32 Hoist Adapter - Diagonal Brace, Removal / Install (CE)
J54009-25 Sling Equipment - Strut AFT Fairing (CE)
J55001-13, -16 Bearing Equipment - Horizontal Stabilizer Removal / Installation
J71001-63, -66 Sling Equipment—Inlet Cowl (CE)
J71032-15 MAT - Protective, Engine Inlet, GE, PW & RR
J71039-155 Guard - Inlet Engine Run UP Safety
J71044 / J71046 Specification - Load Cell Equipment
J78007-58, -85 Removal / Installation Equipment - Exhaust Sleeve & Plug (CE)
K05001-1, -2 Extension Cable—Brake Release, MLG
K07001-14, -18 Emergency Jacking Equipment - MLG (CE)
K07002-13, -17 Emergency Jacking Equipment - NLG (CE)
K07003-15 Jack Fitting - FWD Body
K07004-1 Jack Fitting Equipment - Inner Wing
K07005-1 Jack Fitting Equipment - Outer Wing
K07006-1 Sling Equipment - Lifting Tethering Airplane Recovery (CE)
K07007-1, -2, -35, -36 Hoist Equipment - Airplane Recovery Without MLG
K09001-1 TowBar
K10001-1, -26 Protective Cover - Wheel / Tire / Brake, MLG & NLG
K10002-1 Plug - Inlet Vent, RR Trent 1000
K10003-1, -13 Tethering Equipment - Engine Pylon, Airplane Recovery
K10004-1, -24 Plug Set - Exhaust Vent , Thermal Anti-Icing
K10005-33, -34 Tethering Restraint - Entry Door
K10006-1, -17 Tethering Equipment - Upper AFT Fuselage
K10007-1 Protective Cover - Engine Inlet, GE GEnx
K10008-14, -23 Protective Plug Equipment - Engine Exhaust, GE GEnx
K10009-1, -15 Protective Plug Equipment - Thrust Reverser Exhaust Duct, GE GEnx
K10010-21, -22 Tethering Equipment - Inboard and Outboard Flap Support
K10011-1 Protective Cover - Engine Inlet, RR Trent 1000
K10012-14 Protective Plug Equipment—Engine Exhaust, RR Trent 1000
K10013-15 Protective Plug Equipment - Thrust Reverser Exhaust Duct, RR Trent 1000
K12001 Specification - Platform, Access MLG Wheel Well
K20001-64 Hoist—FWD Electronic / Equipment (E/E) Bay Line Replaceable Units (LRU) (CE)
K20002-25 Personnel Equipment - Shock Absorbing Lanyard, Engine / Strut
K20003-35, -49 Personnel Equipment - Shock Absorbing Lanyard, Upper Wing (CE)
K20004-30, -31 Personnel Equipment - Shock Absorbing Lanyard, Horiz. Stab (CE)
K20005-1 Work Table - Pilot’s Aisle Stand

Copyright 2016, DCM Aerospace, All Rights reserved


79
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Boeing 787
Worldwide Licensed Manufacturer - GSE

————————————————————————————————–—————
Part Numbers Description
————————————————————————————————–—————
K20008-46 Hoist - AFT Electrical / Electronic Bay Line Replaceable Units (CE)
K20009-1 Pin Set - Rigging
K20010-1 Hoist Equipment—P100 and P200 Power Panel Removal / Inst’l (CE)
K20012-1, -2, -3 Protective Equipment - P100/P150/P200 Panels, AFT Electrical / Electronic Bay
K20014-1 Wrench - Battery Enclosure, Electrical / Electronic Bay
K21001-1 Install / Remove / Transport Cart - Supplemental Cooling Unit
K21002-1 Transport Equipment - Cargo Refrigeration Unit Removal & Installation (CE)
K21003-1, -67 Installation / Removal Equipment - Power Electronics Cooling System (PECS) (CE)
K21004-40, -72 Adapter Equipment - Heat Exchanger Cluster, Removal & Installation (CE)
K21006-46 Jack Adapter - Air Compressor, Air Conditioning Pack (CE)
K21008-1 Jack Adapter - Air Cycle Machine, Air Conditioning Pack (CE)
K21010-45 Jack Adapter - Ram Air Fan, Air Conditioning Pack (CE)
K21011-59 Adapter Equipment - Adjustable Angle Jack (CE)
K21012-1 Support, Fluid Service Cart Hose
K21013-36 Remv’l / Inst’l Equipment - FWD Cargo Air Conditioning (FCAC) Pump (CE)
K21014-1 Jack Adapter - Condenser, Air Conditioning Pack, Removal and Installation (CE)
K21016-129, -130, -136 Adapter Kit - Liquid Cooling System Service
K24001-1, -2, -3, -4, -114 Hoist Adapter - Variable Frequency Starter Generator (VFSG) (GE & RR) and
-118, -119, -120 APU Starter Generator (ASG) (CE)
K24002-1, -2, -3, -71 Dispatch Equipment—Motor Controllers
K24003-2, -3, -4, -5 Breakout Equipment—Radiall EPX Connectors
-6, -7, -8, -9, -10, -11
-12, -13, -14, -15, -16
-17, -18, -19, -20
-21, -22, -23, -24, -25
-26, -27, -28
K24004-1 Breakout Equipment - Power Conversion Panel (P500 / P600, in line)
K24005-84 Variable Frequency Starter Generator Hoist - RR Engine All Purpose Stand (CE)
K24006-51, -66 Breakout Box - Auto Transformer Rectifier Unit (ATRU)
K24007-1, -2, -3, -82 Breakout Box Equipment - Motor Controllers
K24008-1 Breakout Box - Remote Power Distribution Units (RPDU, In Line)
K24011-2 Breakout Box - Start Power Unit (SPU, In line)
K24012-1 Dispatch Kit - APU Starter Generator (ASG)
K24013 (Various) Breakout Box - Circular Connectors, multipurpose
K25001-1 Lever - Stowage Bin Release
K25002-1 Adapter Equipment - Overhead Flight Attendant Rest (OFAR) / Overhead Flight Crew
Rest (OFCR) Module, Removal / installation
K25003-1 Hoisting Equipment - Upper Vestibule Module Removal / Installation
K25005-1, -125 Dolly Equipment - Overhead Flight Attendant Rest (OFAR) / Overhead Flight Crew
Rest (OFCR) Module Removal / Installation

Copyright 2016, DCM Aerospace, All Rights reserved


80
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Boeing 787
Worldwide Licensed Manufacturer - GSE

————————————————————————————————–—————
Part Numbers Description
————————————————————————————————–—————
K25007-1, -49 Cart - Passenger Seat
K26001-1, -20 Test Equipment - Fire Extinguishing Tubing, Cargo Compartment
K26003-35, -36 Test Equipment - Engine Fire Extinguishing System
K27001-1, -100 Removal / Installation Equipment - Leading Edge / Trailing Edge Power Drive Unit
(PDU) (CE)
K27002-83, -85 Adapter Equipment - Trailing edge Geared Rotary Actuator, Removal / Inst’l (CE)
K27003-1 Adapter Equipment - Aileron Power Control Unit Removal / Installation (CE)
K27004-156, -157, -158 Hoist Equipment - Removal & Installation, Rudder Power Control Unit (CE)
K27005-63 Removal / Installation Equipment - Elevator Power Control Unit (CE)
K27006-1 Removal / Installation Equipment - Spoiler Electric Motor Actuator (CE)
K27007-1 Drive Adapter Equipment - Actuator, Horizontal Stabilizer Trim
K27008-67 Sling Equipment - Removal / Installation, Aileron (CE)
K27009-124 Removal / Installation Equipment - Flaperon (CE)
K27010-99, -104 Remove / Install Equipment - High Lift Hydraulic Control Unit (CE)
K27011-32, 33, 47 Dispatch Equipment - Hydraulic Spoiler Actuators
K27012 Drive Adapter - Torque Tube Couplings, Leading Edge Slat and Trailing Edge Flap
K27013-1 Electrical Covers - Leading Edge Slats, Trailing Edge Flaps, Flaperons
K27014-38 Gap Gage - Spoiler to Flap Clearance
K27015-24 Lock - Aileron Power Control Unit
K27016-1 Lock - Horizontal Stabilizer Actuator Ball Nut
K27017-22, -36, -46 Lock Equipment - Spoiler Hydraulic Actuators
K27019-1, -56, -66, -70 Lock Equipment - Trailing Edge Flap
K27021-1 Removal / Installation Equipment - Horiz. Stab. Trim Actuator
K27022-1, -39 Rigging Equipment - Flaperon
K27023-42, -64 Sling Equipment - Elevator Removal / Installation (CE)
K27024-25, -30 Sling Equipment - Inboard Trailing Edge Flap, Removal & Installation (CE)
K27025-25, -28 Sling Equipment - Outboard Trailing Edge Flap, Removal & Installation (CE)
K27027-175, -207 Sling Equipment - Removal / Installation, Inboard and outboard Slats (CE)
K27029-1 Extender Breakout Box Equipment - Flight Control Electronics Unit (FCEU)
K27030-1, -2 Revolution Counter Equipment and Adapter Equipment
K27032-1 Pin Puller Equipment - Drive Link, Outboard Trailing Edge Flap
K27033-1 Wrench Set - Wing Trailing Edge Flap Support Nut
K27035-1 Support Rod - Flaperon
K27036-1 Wrench Equipment - Eccentric bushing Adjustment, Trailing Edge Flaps
K27037-1, -47, -48 Rigging Equipment - Leading Edge Slat Installation
K27038-1, -25 Lock—Rudder Power Control Unit
K27039-1 Rigging Equipment - Trailing Edge Flaps

Copyright 2016, DCM Aerospace, All Rights reserved


81
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Boeing 787
Worldwide Licensed Manufacturer - GSE

————————————————————————————————–—————
Part Numbers Description
————————————————————————————————–—————
K27040-1 Clamp Equipment - Drive Shafts, Leading Edge Slats and Trailing Edge Flaps
K27041-69 Dolly - Horizontal Stabilizer Trim Actuator
K27044-1 Support Equipment - Aileron
K27046-15, -21 Lock - Elevator Power Control Unit (PCU)
K27047-1 Removal / Installation Equipment - Spoilers and Flaperon Hinge Panels (CE)
K27048-1 Dispatch Equipment - Horizontal Stabilizer Trim Actuator
K27049-54, 78, -88 Hoist Equipment - Electronic Motor Controller, Horizontal Stabilizer (CE)
K27050-1 Rigging Equipment - Trailing Edge Control Surface
K27051-1, -10 Measuring Equipment - Electric Motor Actuator Position, Spoiler
K27052-1 Removal / Installation Equipment / Torque Tube, Inboard Trailing Edge Flap
K27054-1 Rigging Tool - Elevator
K27055-1 Rigging Tool - Rudder
K27056-1 Support Equipment—Elevator Power Control Unit (CE)
K27057-1, -10 Wrench - Eccentric Bushing Adjustment, Leading Slat
K27058-1 Rigging Tool - Slat Skew Detection Cable
K27059-1, -12 Dispatch Equipment - Spoiler Electro Mechanical Actuator (SEMA)
K27061-1 Lock-Out Equipment - Spoiler Electro Mechanical Actuator (CE)
K28001-1 Spanner Wrench - Fuel Sump Drain Valve
K28002-1 Drain Fitting - Fuel System
K28003-1 Defueling Fitting - Main and Override Pump
K28004-1 Test Equipment - Leak and Pressure, APU Fuel Line
K28005-1 Test Equipment—Surge Tank Pressure Relief Valve
K29001-1, -60 Adapter Equipment - Electric Motor Pump Removal / Installation (CE)
K29002-78 Removal / Installation Equipment, Ram Air Turbine (CE)
K29003-1 Adapter Assembly - Engine Driven Pump Bleed Adapter
K29004-1 Adapter Reservoir Stand Pipe Operational Test
K30001-1 Breakout Equipment - Wing, Translating Wire Bundle (WIPS/ SKEW, In-Line)
K31001-1 Test Set - P40 Receptacle to Headset Jack
K32001-1 Sling Equipment - Retract Actuator
K32002-1 Protector Equipment - Axle and Thread, NLG
K32003-1 Spring Removal / Installation Equipment - MLG Uplock & MLG Door Uplock
K32004-17, -18 Removal / Installation Equipment - Fuse Pin, MLG FWD Trunnion Support
K32006-1 Hoist Adapter Equipment - NLG Drag Brace Rem’l & Inst’l (CE)
K32007-1 Spring Removal / Installation Equipment - Drag Brace, MLG
K32008-71, -100 Wrench Kit - Landing Gear
K32009-1, -25 Puller Equipment - Trunnion Pin, NLG ass’y and NLG Upper Drag Brace
K32010-1 Dolly - Transportation, NLG
K32011-1, -56 Replacement Equipment - Lower Bearing Seals, MLG
K32012-1, -77 Hoist Equipment - Removal / Installation, NLG (CE)
K32013-1 Removal / Installation Equipment - Retract Actuator, NLG (CE)
K32014-1 Removal / Installation Equipment - MLG
K32015-1 Replacement Equipment - Lower Seals, NLG
K32016-1 Turnbuckle - Truck Position Actyuator, MLG

Copyright 2016, DCM Aerospace, All Rights reserved


82
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Boeing 787
Worldwide Licensed Manufacturer - GSE

————————————————————————————————–—————
Part Numbers Description
————————————————————————————————–—————
K32017-1, -164 Build-Up Equipment—Truck Beam, MLG
K32018-35 Side Strut Adjusting Equipment - Drag Strut Lock Link Assembly MLG
K32019-64 Sling Equipment - Drag and Side Brace Removal / Installation (CE)
K32020-1, -29 Retainer Equipment - MLG / NLG Torsion Link
K32021-1 Dispatch Kit - Brake / Electric Brake Actuator (EBA) Connection Covers
K32022-1 Wrench - NLG Wheel Retention Nut
K32023-1 Shock Strut Equipment - Component Maintenance, NLG
K32024-1 Shock Strut Equipment - Component Maintenance, MLG
K32025-1 Removal / Installation Equipment - Retract Actuator, MLG Door (CE)
K32026-1 Locating Equipment - Uplock Roller, MLG Door
K32027-1 Pump, Retraction / Extension Landing Gear Actuator
K32028-1, -2 Spanner Wrench - Gland Nut, MLG & NLG
K32030-1 Sling Equipment - Handling, NLG
K32031-1, -11 Puller Equipment - Bushing, MLG Bogie Beam
K32032-1 Spanner Wrench - Steering Nut, NLG
K32033-1 Build-Up Fixture Equipment - Shock Strut NLG
K32035-1, -11 Removal & Installation Equipment - MLG Bogie Pivot Pin
K32036-1, -2, -3 Dispatch Equipment—Axle Remote Data Concentrator
K32037-1 Protector Equipment—Axle MLG
K32038-1 Puller Equipment—Wheel & Brake Sleeves, MLG Axles (CE)
K32039-1 Puller Equipment—Goodrich Brakes, MLG
K32040-1, -73 Sling Equipment—Drag and Side Brace Removal / Installation MLG (CE)
K35001-19, -100 Test Equipment - Flow Fuse, Crew Oxygen Distribution Manifold
K38001-1 Removal / Installation Equipment - Vacuum Waste Tanks
K42001-1 Breakout Box Equipment - Remote Data Concentrator (RDC) Connectors, Line
Maintenance (IN-LINE)
K42002-1 Breakout Box Equipment - Network Switch, Remote
K42003-1 Breakout Equipment - Common Computing Resource (CCR) Cabinet
K42004-1 Jumper Cable - Power Right Common Computing Resource Cabinet
K45001-1 GSE Kit - Maintenance Laptop
K45003-1 GSE Kit - Maintenance Laptop (Windows7)
K46001-1 Breakout Equipment - Core Network Cabinet (IN-LINE)
K46002-1 Fiber Optic Breakout Equipment
K46003-1 Cable Assembly—Core Network Power
K47001-1, -116 Nitrogen Generation System (NGS) Air Separation Module, Remv’l & Inst’l (CE)
K47002-35 Leak Check Equipment
K47003-1 Equipment - Nitrogen Generation System Motor Driven Compressor,
Removal & Installation (CE)
K49001-7 Thread Protector Equipment - APU Retention Bolts
K49002-1 Hoist Equipment - APU Starter Generator (ASG) (CE)
K49003-1 Dispatch Kit - APU
K49004-1 Hoist Equipment—APU Removal / Installation (CE)
K51001-56, -62 Static Balance Equipment - Flight Control Surfaces

Copyright 2016, DCM Aerospace, All Rights reserved


83
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Boeing 787
Worldwide Licensed Manufacturer - GSE

————————————————————————————————–—————
Part Numbers Description
————————————————————————————————–—————
K51002-1 Platform - Service, Forward APU Firewall
K51004-1 Bond Test Equipment—Standoffs, Pressure Deck Heat Shields
K52001-1, -29 Rigging Simulator - Escape Slide, Passenger Door
K52002-2, -66, -67, -68 Barrier - Passenger Entry Doors
K52002-90
K52005-49, -85, -97 Hold Open Equipment - Passenger Entry Door
K52006-1 Removal / Installation Equipment - Bulk Cargo Door (CE)
K52007-1 Barrier - Safety Access Door
K52008-175, -176, -233 Removal / Installation Equipment - MLG Door
K52008-241
K52009-1 Barrier - Bulk Cargo Door
K52010-1 Compression Set - Spring Passenger Entry Doors
K52011-1 Installation Tool - Door Seal
K52012-1 Test Equipment - Latch Assembly Blowout Doors
K52014-1 Tool Kit - Cargo Door Rigging Adjustment
K52015-23 Sling Equipment - Large Cargo Door Installation / Removal (CE)
K52016-1 Safety Barrier - Cargo Doors
K52017-1 Barrier - Section 48, Service Access Door
K52018 Power Tool, Large Cargo Door Manual Opening
K52024-69 Sling Equipment - Passenger Door, Removal/ Installation (CE)
K52025-9 Wrench - Bearing Retainer End Cap, Lift Mechanism, Large Cargo Door
K52026-1 Wrench - Hook Pull-IN Mechanism - FWD and AFT Cargo Door
K52028-1 Wrench - Removal / Installation, Pull-IN Bearing Retainer Nut, Pull-IN Mechanism
K52029-10 Dummy Girt Bar - Passenger Door Adjustment
K52030-1 Adapter - Manual Drive, Large Cargo Door
K52031-7 Rig Pin - Passenger Entry Door Lock
K52032-1 Door Edge Protector - Removal / Installation
K52033-1 Passenger Entry Door Vent Flap Seal Tool - Removal Installation
K52034-1 Passenger Entry Door Hold-UP Rod, Removal / Installation
K52035-1 Passenger Entry Door Hold-Up Rod
K52036-1 Drilling Equipment - Hinge column Assembly, Passenger Entry Doors
K52037-15 Installation Assembly - Window Edge Protector
K52038-1 Cam Nut Socket - Removal / Installation, Handle Cam Nut
K52039-1 Rig Pin, Passenger Entry Door Girt Bar
K52040-1 Rig Pin - Large Cargo Door Valve Lever Arm
K52041-1 Rigging Equipment - Large Cargo Door Vent Door Closed
K52042-1 Spanner Wrench - Hinge Column Gas Spring
K52044-1 Adapter - Drain Valve
K52045-1 Spring Compression Equipment - Latch Probe Installation, Bulk Cargo Door
K52046-1 Location Tool - Latched Proximity Sensor, FWD and Aft Cargo Door
K52047-1 Roller Guide Adjustment Tool - Electric Equipment Access Doors
K52048-1 Wrench Eccentric Inner Bushing, Bulk Cargo Door
K52049-1 Fill and Bleed Equipment—Large Cargo Door

Copyright 2016, DCM Aerospace, All Rights reserved


84
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Boeing 787
Worldwide Licensed Manufacturer - GSE

————————————————————————————————–—————
Part Numbers Description
————————————————————————————————–—————
K52050-1 Removal / Installation Socket - Door Handle Nut, Access Doors
K52051-1 Proof Load Equipment - Removal / Installation Equipment, MLG
K53001-1 Platform Equipment - Pressure Bulkhead Access
K53002-31 Removal / Installation Equipment - Radome (CE)
K53003-34 Ladder Equipment - Empennage Access, Vertical Fin
K53004-1, -54 Access Ladder Equipment - Horizontal Stabilizer
K53005-1 Wrench Assembly - Torque Adjustment, Radome Latch
K53007-1 Platform Equipment - Passenger Floor Panel Support
K54001-100, -111 Removal / Installation Equipment - AFT Strut Fairing (CE)
K54003-1 Sling Equipment - Strut Fuse Pin Unload, RR Engine (CE)
K54004-43 Sling Equipment - Removal / Installation Engine Pylon (CE)
K54005-1, -38, -48 Removal / Installation Kit - Fuse Pin
K54006-1 Locating Jig Equipment - Side Link Hole Centers
K54007-1 Sling Equipment - Strut Unload, GE Engine (CE)
K55001-1, -55 Jacking Equipment - Horizontal Stabilizer
K55002-1, -2 Lock Assembly - Horizontal Stabilizer
K55003-1 Removal / Installation Equipment - Hinge Pin, Horizontal Stabilizer
K55005-1, -87 Sling Equipment - Removal / Installation, Vertical Fin
K55006-73, -74 Reaction Fixture Equipment - Torque Tool
K55006-75, -125
K55008-1 Tension Bolt Inspection Platform
K56001-38 Sling Set - Number 1 & 2 Control Cabin Windows (CE)
K56002-1 Protractor - Window Clip Check, Passenger Door
K56003-1 Removal Shim - Passenger Door
K71001-140 Engine Change Kit - GE (CE)
K71002-116, -141 Engine Change Kit - Rolls Royce (CE)
K71003-65,-73, -86, -87 Proof Load Fixture Adapter - Bootstrap Equipment
K71004-34 Transportation Equipment - Engine Mount Stabilization, GE
K71005-1 Transportation Equipment - Engine Mount Stabilization, Rolls Royce
K71006-20 Hoist Equipment - Engine Mounts FWD and AFT, RR and GE (CE)
K71007-1 Thread Protector Equipment - Engine Mount & Thrust Link Bolts, GE & RR Eng.
K71008-37 Sling Equipment - Fan Cowl Support Beam, GE GEnx (CE)
K71009-36, -41 Sling - Fan Cowl (CE)
K71010-1, -2 Stand Assembly - Storage, Inlet Assembly
K71011 Specification—Access Platform, GE and RR Engines
K71012-1 Adapter—Hand Pump, Power Door Opening System
K78001-49 Thrust Reverser Change Kit - GE GEnx
K78002-70 Sling Equipment - Thrust reverser Sleeve, GEnX (CE)
K78003-71, -95 Thrust Reverser Change Kit - RR Trent 1000 (CE)
K78004-104 Sling Equipment - Removal / Installation, Fan Reverser Sleeve , RR Trent 1000 (CE)
K78005-22 Hold Open Equipment - Hangar Maintenance, RR Thrust Reverser
K78006-1 Lock - Thrust reverser Isolation Valve (Ground)

Copyright 2016, DCM Aerospace, All Rights reserved


85
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

Boeing 787
Worldwide Licensed Manufacturer - GSE

————————————————————————————————–—————
Part Numbers Description
————————————————————————————————–—————
K78008-1 Stand Transportation / Work GEnx Thrust Reverser
K78009-1 Hold Open Equipment - Hangar Maintenance, GE Thrust Reverser
K78010-72 Stand - Transportation / Work, RR Trent 1000 Thrust Reverser
2CF65B05528-1 Balance Stand - Outboard Aileron, Upper Rudder and Outboard Elevator
2ME65B00002 Wrench - Spanner Safety Lanyard Tie Down Locks
TMH AE50 Wireless Weighing Load Cells
TMH AS53 Tripod Jack Nose
TMH TJ50 Tripod Jack Nose
TMH TJ80 Tripod Jack Tail
TMH TJ81 Tripod Jack Wings
TMH TB77 Polyvalent Tow Bar

Copyright 2016, DCM Aerospace, All Rights reserved


86
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

WARRANTY
DCM AEROSPACE (“DCM”) warrants that this product, manufactured in accordance with the best standards of
workmanship, is free from any known defects, has been inspected and tested and was found to be in conformance
with the specific standards, drawings and other pertaining documents.

This commitment is in force for one (1) year from the date of shipment and applies only to the original user
(Purchaser) of new Equipment from DCM. The product purchased under this agreement shall be used exclusive-
ly by the Purchaser. There shall be no third party beneficiary of this warranty, except as authorized by DCM
Aerospace.

DCM has the right to site inspection and judgment of the claimed defects in any product cov-
ered by this warranty. DCM’s liability is limited to the repair of any defects found by DCM to
exist or, at DCM option, the replacement of the defective item.

When the part or equipment must be returned to DCM for inspection or repair, the Purchaser
must pay the transportation cost. Should the customer require the inspection or work to be
done on his site by DCM qualified technicians, the Purchaser will have to assume the travel-
ling expenses (traveling and logging expenses) of the technicians. Without limiting what fol-
lows, DCM will assume the cost of labour to execute the repair to be done on site under war-
ranty.
The warranty does not cover :

Parts required for normal maintenance (normal wear and tear).


Parts already covered by a component manufacturers warranty.
Defects or deficiencies due to or arising out of weather or other influences of nature.

This warranty will apply only if all the following conditions are met:

1) the product was installed and operated in accordance with accepted industrial standards and in accord-
ance with the printed instructions furnished by DCM or by original designer; and ,
2) the Equipment was used under normal conditions for which designed; and,
3) the product was not used in a corrosive, abnormally dusty or high humidity moisture condensing envi-
ronment; and ,
4) the Equipment was not subjected to misuse, improper, abnormal, or negligent handling, operation,
maintenance, overloading, or use (e.g. exceeding the maximum workload, improper maintenance), im-
proper site or installation; and,
5) the Equipment received proper care, protection and maintenance under the supervision of competent
personnel; and,
6) no tampering, alteration, or repair were made by Purchaser, or by a third party other than DCM, without
the prior written consent of DCM.

The warranty will not apply unless the buyer gives written notice to DCM of the specific defect within seven (7)
business days of discovery of such defect and the buyer has met its financial obligation under the Contract, in-
cluding its payment obligations. If a problem requiring servicing occurs, please contact DCM immediately. Do
not attempt to repair or disassemble the product without first contacting DCM, since any action may affect war-
ranty coverage.

Copyright 2016, DCM Aerospace, All Rights reserved


87
890 Michele-Bohec, Blainville, Quebec, Canada, J7C 5E2
Phone: +1-450-435-9210
E-Mail: [email protected]

WARRANTY
THIS LIMITED WARRANTY as defined herein, is the SOLE AND EXCLUSIVE WARRANTY OF DCM
AND IS EXPRESSLY IN LIEU OF ANY AND ALL OTHER OBLIGATIONS OR WARRANTIES,
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WAR-
RANTIES OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE, WHICH
ARE HEREBY EXPRESSLY DISCLAIMED.

Purchaser’s sole and exclusive remedy for breach of warranty against DCM is limited to
the repair or replacement, at DCM’s option, of defective parts. In the event DCM is una-
ble or otherwise fails to repair or replace within a reasonable time, Purchaser’s sole and
exclusive remedy against DCM is limited to an amount not in any event to exceed the
Purchase Amounts actually paid for the Equipment (upon return of the Equipment to
DCM).

DCM shall in no event be liable to the Purchaser, nor shall the Purchaser recover from DCM, for injury to per-
sons or damage to property, or any other loss or damage whatsoever, arising out of or in connection with the con-
tract, delivery, assembly, disassembly, repair, use, or installation of the Equipment (whether arising from any
claim based upon contract, warranty, tort, products, liability, strict liability, or any other legal or equitable theo-
ry), for any amount in excess of the purchase amounts actually paid by the Purchaser to DCM for the Equipment;
provided, however, that in no event shall DCM be liable to Purchaser in any manner for any special, indirect,
incidental, or consequential damages, including damages or losses arising out of the inoperability of the Equip-
ment, operating labour, overhead, or lost profits (whether arising from contract, warranty, tort, products liability,
strict liability, or any other legal or equitable theory), even if DCM has been advised of the possibility therefore.
Any action for an alleged breach of contract relating to any Equipment sold by DCM to the Purchaser must be
commenced by Purchaser within one (1) year of the date on which such cause of action accrued.

The provisions of this agreement shall be construed and enforced in accordance with the uniform commercial
code as enacted in the Province of Quebec - Canada. ***

DCM Aerospace
519 Papineau street
Boisbriand, Quebec
Canada, J7G 2B7

Phone : (450) 435-9499


Fax : (450) 435-3378
E-Mail : [email protected]
Web site : www.dcmaerospace.com

Copyright 2016, DCM Aerospace, All Rights reserved


88

You might also like