W.O. NO.: 22-256 PREP. BY: AP MTO NO.

: 22-256-TS-01
CUSTOMER : KEPPEL CHK. BY: BPS REV. NO.: 1
MTO FOR DISC FORGINGS
OWNER : PETROBRAS APPR. BY: NSM ISS. DT.: 19-Jul-2023 05.17 PM
HEAD MTO: PM / PR-ENGR.:

Size (mm)
Sr. Wt. IBR TDC Unit
Tag. No. - Item No. Description Type T t1 t2 ΦA D1 D2 BCD N-Nos. Φd Qty. TDC No. Remark Rev.
No. (kg) (Y/N) Rev Price

1 P-1223001 A/F-201 STATIONARY TUBESHEET A 71 - - 1466 - - - - - 6 6066 N 22-256/TR1/F-3 0 0

2 P-1223001 A/F-202 FLOATING TUBESHEET A 71 - - 1385 - - - - - 6 5418 N 22-256/TR1/F-3 0 0
P-1223001 A/F-
3 MOCK UP - 200 x 200 x 55 THK 3 0 N 1
202.1
4 P-1223002 A/F-201 STATIONARY TUBESHEET A 84 - - 1484 - - - - - 12 14718 N 22-256/TR1/F-3 0 1
5 P-1223002 A/F-202 FLOATING TUBESHEET A 84 - - 1385 - - - - - 12 12816 N 22-256/TR1/F-3 0 0
P-1223002 A/F-
6 MOCK UP - 200 x 200 x 55 THK 2 0 N 0
202.1
TOTAL WT. 39018 kg. TOTAL PRICE
SB-564 UNS No. N06625
Material: Annealed

This MTO reports is generated from TEMA INDIA proprietary software.

Revised text is highlighted in bold and underline. 1 of 2
 W.O. NO.: 22-256 PREP. BY: AP MTO NO.: 22-256-TS-01
CUSTOMER : KEPPEL CHK. BY: BPS REV. NO.: 1
MTO FOR DISC FORGINGS
OWNER : PETROBRAS APPR. BY: NSM ISS. DT.: 19-Jul-2023 05.17 PM
HEAD MTO: PM / PR-ENGR.:
Rev Notes: Design No Tag No
0 1) ALL DIMENSIONS ARE IN MM, UNLESS OTHERWISE SPECIFIED. SDB/E/232800 P-1223001 A/F
0 2. MTO SR. NO. 3 & 6 MATERIAL SHALL BE SUPPLIED WITH CERTIFICATION TO EN 10204 TYPE 3.1 MINIMUM. SDB/E/232801 P-1223002 A/F
0 3) MTO SR. NO. 3 & 6 MATERIAL SHALL MEET THE REQUIREMENT OF ASME SEC II PART B 2021 EDITION SDB/E/232802 P-1223003 A/B
0 4) MOCK UP BLOCKS SHALL BE OF SAME HEAT AS THAT OF RESPECTIVE TUBESHEET MATERIAL, i.e. FORGINGS OF SR. NOS. 1,2,3 SHALL BE OF SDB/E/232803 P-1223004
0 SAME HEAT. SIMILARLY FORGINGS OF SR. NOS. 4,5,6 SHALL BE OF SAME HEAT SDB/E/232804 P-5125001
SDB/E/232805 P-5147001

This MTO reports is generated from TEMA INDIA proprietary software.

Revised text is highlighted in bold and underline. 2 of 2
 W.O. NO.: 22-256 PREP. BY: AP MTO NO.: 22-256-FG-01
CUSTOMER : KEPPEL CHK. BY: BPS REV. NO.: 0
MTO FOR FORGED RING/ SHELL
OWNER : PETROBRAS APPR. BY: NSM ISS. DT.: 09-Jun-2023 04.41 PM
HEAD MTO: : PM / PR-ENGR.:

REFER STANDARD ANNEXURE FOR

WELD EDGE PREPARATION (WEP)
Size (mm) DETAILS.
Sr. T-Type A TAPER Wt. IBR TDC
Tag. No. - Item No. Description Type OD ID WEP | WEP1 ØD Qty. TDC No. Remark Unit Price Rev.
No. L-Type B LG. (kg) (Y/N) Rev

1 P-1223001 A/F-209 FLOATING HEAD FLANGE A 1504 1362 150 N.A. 6 2430 N 22-256/TR1/F-3 0 0
2 P-1223001 A/F-210 BACKING RING A 1504 1361 132 N.A. 6 2148 N 22-256/TR1/F-3 0 0
3 P-1223002 A/F-209 FLOATING HEAD FLANGE A 1518 1362 155 N.A. 12 5538 N 22-256/TR1/F-3 0 0
4 P-1223002 A/F-210 BACKING RING A 1518 1361 142 N.A. 12 5106 N 22-256/TR1/F-3 0 0
TOTAL WT. 15222 kg. TOTAL PRICE
Material: SB-564 UNS No. N06625 Annealed

This MTO reports is generated from TEMA INDIA proprietary software.

Revised text is highlighted in bold and underline. 1 of 2
 W.O. NO.: 22-256 PREP. BY: AP MTO NO.: 22-256-FG-01
CUSTOMER : KEPPEL CHK. BY: BPS REV. NO.: 0
MTO FOR FORGED RING/ SHELL
OWNER : PETROBRAS APPR. BY: NSM ISS. DT.: 09-Jun-2023 04.41 PM
HEAD MTO: : PM / PR-ENGR.:
Rev Notes: Design No Tag No
0 1) ALL DIMENSIONS ARE IN MM, UNLESS OTHERWISE SPECIFIED. SDB/E/232800 P-1223001 A/F
SDB/E/232801 P-1223002 A/F
SDB/E/232802 P-1223003 A/B
SDB/E/232803 P-1223004
SDB/E/232804 P-5125001
SDB/E/232805 P-5147001

This MTO reports is generated from TEMA INDIA proprietary software.

Revised text is highlighted in bold and underline. 2 of 2
 W.O. NO.: 23-065 PREP. BY: AP MTO NO.: 23-065-TS-01
CUSTOMER : KEPPEL CHK. BY: BPS REV. NO.: 1
MTO FOR DISC FORGINGS
OWNER : PETROBRAS APPR. BY: NSM ISS. DT.: 19-Jul-2023 05.19 PM
HEAD MTO: PM / PR-ENGR.:

Size (mm)
Sr. Wt. IBR TDC Unit
Tag. No. - Item No. Description Type T t1 t2 ΦA D1 D2 BCD N-Nos. Φd Qty. TDC No. Remark Rev.
No. (kg) (Y/N) Rev Price

1 P-1223001 A/F-201 STATIONARY TUBESHEET A 71 - - 1466 - - - - - 6 6066 N 23-065/TR1/F-3 0 0

2 P-1223001 A/F-202 FLOATING TUBESHEET A 71 - - 1385 - - - - - 6 5418 N 23-065/TR1/F-3 0 0
P-1223001 A/F-
3 MOCK UP - 200 x 200 x 55 THK 3 0 N 1
202.1
4 P-1223002 A/F-201 STATIONARY TUBESHEET A 84 - - 1484 - - - - - 12 14718 N 23-065/TR1/F-3 0 1
5 P-1223002 A/F-202 FLOATING TUBESHEET A 84 - - 1385 - - - - - 12 12816 N 23-065/TR1/F-3 0 0
P-1223002 A/F-
6 MOCK UP - 200 x 200 x 55 THK 2 0 N 0
202.1
TOTAL WT. 39018 kg. TOTAL PRICE
SB-564 UNS No. N06625
Material: Annealed

This MTO reports is generated from TEMA INDIA proprietary software.

Revised text is highlighted in bold and underline. 1 of 2
 W.O. NO.: 23-065 PREP. BY: AP MTO NO.: 23-065-TS-01
CUSTOMER : KEPPEL CHK. BY: BPS REV. NO.: 1
MTO FOR DISC FORGINGS
OWNER : PETROBRAS APPR. BY: NSM ISS. DT.: 19-Jul-2023 05.19 PM
HEAD MTO: PM / PR-ENGR.:
Rev Notes: Design No Tag No
0 1) ALL DIMENSIONS ARE IN MM, UNLESS OTHERWISE SPECIFIED. SDB/E/232825 P-1223001 A/F
0 2) MTO SR. NO. 3 & 6 MATERIAL SHALL BE SUPPLIED WITH CERTIFICATION TO EN 10204 TYPE 3.1 MINIMUM. SDB/E/232826 P-1223002 A/F
0 3) MTO SR. NO. 3 & 6 MATERIAL SHALL MEET THE REQUIREMENT OF ASME SEC II PART B 2021 EDITION SDB/E/232827 P-1223003 A/B
0 4) MOCK UP BLOCKS SHALL BE OF SAME HEAT AS THAT OF RESPECTIVE TUBESHEET MATERIAL, i.e. FORGINGS OF SR. NOS. 1,2,3 SHALL BE OF SDB/E/232828 P-1223004
0 SAME HEAT. SIMILARLY FORGINGS OF SR. NOS. 4,5,6 SHALL BE OF SAME HEAT SDB/E/232829 P-5125001
SDB/E/232830 P-5147001

This MTO reports is generated from TEMA INDIA proprietary software.

Revised text is highlighted in bold and underline. 2 of 2
 W.O. NO.: 23-065 PREP. BY: AP MTO NO.: 23-065-FG-01
CUSTOMER : KEPPEL CHK. BY: BPS REV. NO.: 0
MTO FOR FORGED RING/ SHELL
OWNER : PETROBRAS APPR. BY: NSM ISS. DT.: 09-Jun-2023 05.55 PM
HEAD MTO: : PM / PR-ENGR.:

REFER STANDARD ANNEXURE FOR

WELD EDGE PREPARATION (WEP)
Size (mm) DETAILS.
Sr. T-Type A TAPER Wt. IBR TDC
Tag. No. - Item No. Description Type OD ID WEP | WEP1 ØD Qty. TDC No. Remark Unit Price Rev.
No. L-Type B LG. (kg) (Y/N) Rev

1 P-1223001 A/F-209 FLOATING HEAD FLANGE A 1504 1362 150 N.A. 6 2430 N 23-065/TR1/F-3 0 0
2 P-1223001 A/F-210 BACKING RING A 1504 1361 132 N.A. 6 2148 N 23-065/TR1/F-3 0 0
3 P-1223002 A/F-209 FLOATING HEAD FLANGE A 1518 1362 155 N.A. 12 5538 N 23-065/TR1/F-3 0 0
4 P-1223002 A/F-210 BACKING RING A 1518 1361 142 N.A. 12 5106 N 23-065/TR1/F-3 0 0
TOTAL WT. 15222 kg. TOTAL PRICE
Material: SB-564 UNS No. N06625 Annealed

This MTO reports is generated from TEMA INDIA proprietary software.

Revised text is highlighted in bold and underline. 1 of 2
 W.O. NO.: 23-065 PREP. BY: AP MTO NO.: 23-065-FG-01
CUSTOMER : KEPPEL CHK. BY: BPS REV. NO.: 0
MTO FOR FORGED RING/ SHELL
OWNER : PETROBRAS APPR. BY: NSM ISS. DT.: 09-Jun-2023 05.55 PM
HEAD MTO: : PM / PR-ENGR.:
Rev Notes: Design No Tag No
0 1) ALL DIMENSIONS ARE IN MM, UNLESS OTHERWISE SPECIFIED. SDB/E/232825 P-1223001 A/F
SDB/E/232826 P-1223002 A/F
SDB/E/232827 P-1223003 A/B
SDB/E/232828 P-1223004
SDB/E/232829 P-5125001
SDB/E/232830 P-5147001

This MTO reports is generated from TEMA INDIA proprietary software.

Revised text is highlighted in bold and underline. 2 of 2
 TDC FOR MATERIALS W. O. No. 22-256

Ni-Cr-Mo-Nb ALLOY FORGINGS Client -----

(SB-564 UNS N06625)
1. Specification Designation: SB-564 UNS N06625* of ASME Sec. II Part B, 2021 Edition.
Note: ‘*’ Requirements for wrought products are not addressed in Standard ISO 15156 (2020). The
Standard only addressed requirements for corrosion-resistance weld overlays (§ A.13.2). This
note is not applicable for materials manufacturer.

2. Inspection By: As per P.O.

3. Additional Requirements: In addition to the mandatory requirements of material specification,
the below requirements shall also be met & certified unless exemption or modification
mentioned in the MTO. In case of conflict the matter shall be referred to M/s. Tema India
Ltd. for resolution.
3.1 Forgings shall be supplied in Annealed condition as specified in Table 2 of SB-564.
3.2 Product analysis for chemical composition shall be reported.
3.3 Hardness shall be reported and it shall not be more than 35 HRC.
3.4 Ultrasonic Examination ― Irrespective of thickness shall be examined in accordance to
paragraph 3.6.3 of ASME Section VIII Division 2 (2021).
3.5 Liquid Penetrant Examination ― Following final machining all accessible surfaces shall be
examined by the liquid penetrant method in accordance with Practice E165. The evaluation of
indications detected by the liquid penetrant method and the acceptance standards shall be in
accordance with Part 7 of ASME Section VIII Division 2 (2021). Unacceptable imperfections shall
be removed and the areas shall be re-examined to ensure complete removal of the unacceptable
imperfection.
3.6 Repair by welding is not permitted.
3.7 Low stress stamp shall be used for product marking.
3.8 Material Test report and Certification shall be in accordance to EN 10204 Type 3.1.

22-256/TR1/F-3 1 of 1 0 08-05-2023 M. Biswas N. S. Mishra

Document No. Page Rev. Date Prepared by Approved by
Form No. : 04-02 0 19.10.99 Design Engineer Head Design
 TDC FOR MATERIALS W. O. No. 23-065

Ni-Cr-Mo-Nb ALLOY FORGINGS Client -----

(SB-564 UNS N06625)
1. Specification Designation: SB-564 UNS N06625* of ASME Sec. II Part B, 2021 Edition.
Note: ‘*’ Requirements for wrought products are not addressed in Standard ISO 15156 (2020). The
Standard only addressed requirements for corrosion-resistance weld overlays (§ A.13.2). This
note is not applicable for materials manufacturer.

2. Inspection By: As per P.O.

3. Additional Requirements: In addition to the mandatory requirements of material specification,
the below requirements shall also be met & certified unless exemption or modification
mentioned in the MTO. In case of conflict the matter shall be referred to M/s. Tema India
Ltd. for resolution.
3.1 Forgings shall be supplied in Annealed condition as specified in Table 2 of SB-564.
3.2 Product analysis for chemical composition shall be reported.
3.3 Hardness shall be reported and it shall not be more than 35 HRC.
3.4 Ultrasonic Examination ― Irrespective of thickness shall be examined in accordance to
paragraph 3.6.3 of ASME Section VIII Division 2 (2021).
3.5 Liquid Penetrant Examination ― Following final machining all accessible surfaces shall be
examined by the liquid penetrant method in accordance with Practice E165. The evaluation of
indications detected by the liquid penetrant method and the acceptance standards shall be in
accordance with Part 7 of ASME Section VIII Division 2 (2021). Unacceptable imperfections shall
be removed and the areas shall be re-examined to ensure complete removal of the unacceptable
imperfection.
3.6 Repair by welding is not permitted.
3.7 Low stress stamp shall be used for product marking.
3.8 Material Test report and Certification shall be in accordance to EN 10204 Type 3.1.

23-065/TR1/F-3 1 of 1 0 08-05-2023 M. Biswas N. S. Mishra

Document No. Page Rev. Date Prepared by Approved by
Form No. : 04-02 0 19.10.99 Design Engineer Head Design