FABRICATION MATERIALS

N PT
NO COMPONENT DESCRIPTION
N.S.
(INS) ITEM CODE QTY WEIGHT
PIPE

1 NPS:3-Thk:3.05mm-PIPE-ASTM A312 TP316/TP316L DUAL 3 AAC97 21.124 M 137.4

GRADE - SMLS

SUPPORTS

2 GUIDE FOR HORIZONTAL BARE PIPES 1/2" - 18" NPS 3 G0 3 11.7

DesArea: 3 WELDED ISOLATION PLATE FOR STAINLESS STEEL PIPES 3 S9 1 0.3
L84M04 1/2" - 18" NPS
DesArea:
TOTAL FABRICATION WEIGHT 149.4
L83M03

CONT. ON
090-WH-31002/L84
1 E 2318.848M
>
0 <2 N 2879.945M
00
12 EL +21.749M

S2
G0_DIA_3-1-6511
00
60 G0-3-SS

DesArea: S2

L83M03 G0_DIA_3-1-6513

DesArea: G0-3-SS
L82M02 24
91
1
> 1 00 090-WH-31002/L83-S01
<1 60

S2
G0_DIA_3-1-6517
G0-3-SS S3
S9_DIA_3-1-3513
CONT. ON
00 S9-3-SS
090-WH-31002/L82 60

E 2297.724M
N 2879.945M
EL +21.749M
00
15
S
N
3"

CUT PIPE LENGTH

POS. ITEM SIZE LENGTH END 1 END 2 POS. ITEM SIZE LENGTH END 1 END 2
NO CODE (INS) (MM) NO CODE (INS) (MM)

<1> AAC97 3" 9124 BEVEL BEVEL

<2> AAC97 3" 12000 BEVEL BEVEL

WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY

1 3" BW SHOP
2 3" BW FIELD

REMARKS:
SPOOL TABLE

ALL RIGHT RESERVED

LEGEND :
THIS DOCUMENT AND ANY DATA AND INFORMATION CONTAINED THEREIN ARE CONFIDENTIAL AND PROPERTY BP BERAU LTD. AND COPYRIGHT THEREIN IS VESTED
BP BERAU LTD. NO PART OF THIS DOCUMENT, DATA, INFORMATION SHALL BE DISCLOSED TO OTHERS OR REPRODUCED IN ANY MANNER OR USED FOR ANY PURPOSE
WHATSOEVER, EXCEPT WITH THE PRIOR WRITTEN PERMISSION OF BP BERAU LTD.

BUTT WELD
TANGGUH EXPANSION PROJECT
NOTES: @BP p.l.c.
SOCKET WELD
090-WH-31002/L83-S01 3 1 149.17 5.899666 SECURITY CLASSIFICATION
1. ALL DIMENSION, COORDINATES AND ELEVATIONS ARE IN MILLIMETER UNLESS NOTED bp
OTHERWISE TOTAL FABRICATION 149.4 BP INTERNAL
3 1
2. ALL DIMENSION ARE TO CENTER LINE OR FACE OF FLANGES UNLESS NOTED OTHERWISE
JOB NO.
3. FIELD WELDINGS FOR INSTALLATION TO BE DEFINED BY CONSTRUCTION TOTAL ERECTION 3 1 0.0 SCREWED
4. HANDWHEELS OR LEVER ORIENTATION FOR VALVE TO BE CHECKED AT INSTALLATION
SPOOL CODE NR. OF WELDS WEIGHT (Kg) PAINT/INS (sq.m) C01A 25/07/2018 ISSUED FOR CONSTRUCTION 870310
5. NO MODIFICATION FOR CRITICAL LINES WITHOUT PRIOR APPROVAL ETR DYT FAJ
6. IN CASE OF DISCREPANCY BETWEEN THE LINE LIST AND DATA SHOWN ON ISO, LINE LIST REV. TITLE
OPER. DES. OPER. TEST DATE DRAWN CHKD. APPD K: FABRICATION F: ERECTION SCALE
DES. DESCRIPTION
SHALL BE DOMINANT
NPS Piping Insul. Insul. Thk. TEMP. TEST PAINT
No. PIPING ISOMETRIC
TEMP. PRESS. PRESS. PRESS. NDT
7. IN CASE OF DISCREPANCY BETWEEN THE TEST BLOCK DIAGRAM AND "TEST FLUID" OR PWHT
(Inch) Class Type (mm) (°C) (Kg/Cm2G) (Kg/Cm2G)(Kg/Cm2G) FLUID CODE CODE N.T.S.
"TEST PRESS." SHOWN ON ISO, TEST BLOCK DIAGRAM SHALL BE DOMINANT. (°C)
X SHOP WELD 090-WH-31002/L83 (Sht 1of 1 )

090-WH-31002_L83-C01A_001.DWG
DOCUMENT CLASS COMPANY DRAWING NUMBER
X FIELD WELD
REFERENCE DRAWING:
PIPING FABRICATION DRAWING NUMBER 3
- PWHT : - COORDINATE SYSTEM:
TEP-900-ISO-PP-BP4-0004
STRESS CALC. NR. PIPING GA DRAWING P&ID N. <1> DENOTES PIPE PIECE NR.
LE NO:

TEP-900-PRC-PP-BP4-0001 TEP-930-PRC-IM-BP4-0007 CONTRACTOR DRAWING NUMBER

LE NOS:

UNIT SIZE REV. NO.

- PAINT CODE : - NDT CODE :

DEFAULTS FI

1 DENOTES PARTS LIST NR.

C01
M ODEL FI

TEP-900-SPE-PP-BP4-1009 TEP-900-PRC-PP-BP4-0001 A3
3 6SD0P3 NI 0 90.00 39.69 67.00 59.47 100.50 H B+D NO NO 023-002-1A 023-PID-0001-001 090 870310-PTS-900-PIP-BOK-66000

EXTRACTION DATE:

EXTRACTION TIME:
#IPLOT_spm_csdms_organization#spooling#
#IPLOT_object_name#090-WH-31002/L83# #IPLOT_spm_unit_number#090# #IPLOT_spm_fluid#WH# #IPLOT_spm_line_serial_number#31002# #IPLOT_spm_rev_code#C01# #IPLOT_spm_piping_specification#6SD0P3# #IPLOT_spm_project#870310# #IPLOT_spm_csdms_remarks## #IPLOT_spm_fab_rev_code#C01A#