FABRICATION MATERIALS

N PT
NO COMPONENT DESCRIPTION
N.S.
(INS) ITEM CODE QTY WEIGHT
PIPE
DesArea:
1 NPS:10-Thk:7.8mm-PIPE-ASTM A106 GR.B - SMLS 10 AA786 18.000 M 918.0
E41M08
DesArea: SUPPORTS
E40M07
2 SADDLE FOR PIPES 1/2" - 24" NPS 10 S5-150-300 1 12.5
3 SHIM FOR HORIZONTAL PIPES 10 P21-BA-400-60 1 11.0
4 GUIDE ON SADDLE FOR HORIZONTAL INSULATED PIPES 10 G2 1 1.7
1/2" - 80" NPS
5 SHIM FOR HORIZONTAL PIPES 10 P21-AE-300-40 1 3.5
6 SADDLE FOR PIPES 1/2" - 24" NPS 10 S5-150-450 1 17.3

TOTAL FABRICATION WEIGHT 964.0

S
"N
10

CONT. ON
090-GF-31013/E41
1 E 2379.974M
N 2879.192M
EL +25.456M

0
00
S4 12
090-GF-31013/E40-S01
G2_DIA_10-18-1-4146
G2-10 S1

01
45

S2
S5_DIA_10-1-1945
S3
S5-150-300-10-CS
P_21_B_60-1-1101
P21-BA-400-60

DesArea:
1
E40M07 >
<1
DesArea:
L86M06
00
60 00
90

2
S6
S2
S5_DIA_10-1-1937
S5-150-450-10-CS

1
CONT. ON > S5
<2
090-GF-31013/L86 P_21_A_40-1-901
E 2361.974M
P21-AE-300-40
N 2879.192M
EL +25.420M

CUT PIPE LENGTH

POS. ITEM SIZE LENGTH END 1 END 2 POS. ITEM SIZE LENGTH END 1 END 2
NO CODE (INS) (MM) NO CODE (INS) (MM)

<1> AA786 10" 12000 BEVEL BEVEL

<2> AA786 10" 6000 BEVEL BEVEL

WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY

1 10" BW FIELD
S1 10" FW SHOP
2 10" BW SHOP
S2 10" FW SHOP

REMARKS:
SPOOL TABLE

ALL RIGHT RESERVED

LEGEND :
THIS DOCUMENT AND ANY DATA AND INFORMATION CONTAINED THEREIN ARE CONFIDENTIAL AND PROPERTY BP BERAU LTD. AND COPYRIGHT THEREIN IS VESTED
BP BERAU LTD. NO PART OF THIS DOCUMENT, DATA, INFORMATION SHALL BE DISCLOSED TO OTHERS OR REPRODUCED IN ANY MANNER OR USED FOR ANY PURPOSE
WHATSOEVER, EXCEPT WITH THE PRIOR WRITTEN PERMISSION OF BP BERAU LTD.

BUTT WELD
TANGGUH EXPANSION PROJECT
NOTES: @BP p.l.c.
SOCKET WELD
090-GF-31013/E40-S01 30 3 963.67 15.440601 SECURITY CLASSIFICATION
1. ALL DIMENSION, COORDINATES AND ELEVATIONS ARE IN MILLIMETER UNLESS NOTED bp
OTHERWISE TOTAL FABRICATION 964.0 BP INTERNAL
30 3
2. ALL DIMENSION ARE TO CENTER LINE OR FACE OF FLANGES UNLESS NOTED OTHERWISE
JOB NO.
3. FIELD WELDINGS FOR INSTALLATION TO BE DEFINED BY CONSTRUCTION TOTAL ERECTION 10 1 0.0 SCREWED
4. HANDWHEELS OR LEVER ORIENTATION FOR VALVE TO BE CHECKED AT INSTALLATION
SPOOL CODE NR. OF WELDS WEIGHT (Kg) PAINT/INS (sq.m) C01A 16/07/2018 ISSUED FOR CONSTRUCTION 870310
5. NO MODIFICATION FOR CRITICAL LINES WITHOUT PRIOR APPROVAL BMP DYT FAJ
6. IN CASE OF DISCREPANCY BETWEEN THE LINE LIST AND DATA SHOWN ON ISO, LINE LIST REV. TITLE
OPER. DES. OPER. TEST DATE DRAWN CHKD. APPD K: FABRICATION F: ERECTION SCALE
DES. DESCRIPTION
SHALL BE DOMINANT
NPS Piping Insul. Insul. Thk. TEMP. TEST PAINT
No. PIPING ISOMETRIC
TEMP. PRESS. PRESS. PRESS. NDT
7. IN CASE OF DISCREPANCY BETWEEN THE TEST BLOCK DIAGRAM AND "TEST FLUID" OR PWHT
(Inch) Class Type (mm) (°C) (Kg/Cm2G) (Kg/Cm2G)(Kg/Cm2G) FLUID CODE CODE N.T.S.
"TEST PRESS." SHOWN ON ISO, TEST BLOCK DIAGRAM SHALL BE DOMINANT. (°C)
X SHOP WELD 090-GF-31013/E40 (Sht 1of 1 )

090-GF-31013_E40-C01A_001.DWG
DOCUMENT CLASS COMPANY DRAWING NUMBER
X FIELD WELD
REFERENCE DRAWING:
PIPING FABRICATION DRAWING NUMBER 3
- PWHT : - COORDINATE SYSTEM:
TEP-900-ISO-PP-BP4-0006
STRESS CALC. NR. PIPING GA DRAWING P&ID N. <1> DENOTES PIPE PIECE NR.
LE NO:

TEP-900-PRC-PP-BP4-0001 TEP-930-PRC-IM-BP4-0007 CONTRACTOR DRAWING NUMBER

LE NOS:

UNIT SIZE REV. NO.

- PAINT CODE : - NDT CODE :

DEFAULTS FI

1 DENOTES PARTS LIST NR.

C01
M ODEL FI

TEP-900-SPE-PP-BP4-1009 TEP-900-PRC-PP-BP4-0001 A3
10 1CS2P33 TE 50 265.00 233.73 8.00 0.37 12.70 H A+D YES (If Thk > 20mm) A5 011-012-1 011-PID-0004-001 090 870310-PTS-900-PIP-BOK-68000

EXTRACTION DATE:

EXTRACTION TIME:
#IPLOT_spm_csdms_organization#spooling#
#IPLOT_object_name#090-GF-31013/E40# #IPLOT_spm_unit_number#090# #IPLOT_spm_fluid#GF# #IPLOT_spm_line_serial_number#31013# #IPLOT_spm_rev_code#C01# #IPLOT_spm_piping_specification#1CS2P33# #IPLOT_spm_project#870310# #IPLOT_spm_csdms_remarks## #IPLOT_spm_fab_rev_code#C01A#