FABRICATION MATERIALS

N PT
NO COMPONENT DESCRIPTION
N.S.
(INS) ITEM CODE QTY WEIGHT
PIPE
SKIN TEMPERATURE SHALL BE 1 NPS:30-Thk:7.92mm-PIPE- ASTM A358 TP304/TP304L 30 AAP17 2.042 M 300.8
INSTALLED BEFORE INSULATION CL.1 DUAL GRADE - EFW

INSTALLATION. MATERIAL AND

TOTAL FABRICATION WEIGHT 300.8
INSTALLATION BY INSTRUMENT
GROUP.
ERECTION MATERIALS

PT N.S.
NO COMPONENT DESCRIPTION (INS) ITEM CODE QTY WEIGHT
DETAIL (NOTE) A
INSTRUMENTS

2 072-TE-31041H 072TE31041H 1/4 1 -

3 072-TE-31042H 072TE31042H 1/4 1 -

DesArea:
TOTAL ERECTION WEIGHT -
L09I19
DesArea:
L58M19

E 1858.365M
N 4772.103M
072 EL +8.361M 525
TE
31041H 30NS
"

2
7 E 1858.365M
SEE DETAIL A 151
30"X1/4"NS N 4772.103M
REINFORCED EL +8.361M

CONT. ON
072-GL-31001/L09
SPOOL # 072-GL-31001/L58-S01 E 1858.889M
1
CONT. ON DRG 2 N 4772.092M
<1> 1
EL +8.361M
30"X1/4"NS
REINFORCED

88.8°
16
15
072 072-GL-31001/L58-S01
33 TE
31042H

3
SEE DETAIL A

CUT PIPE LENGTH

POS. ITEM SIZE LENGTH END 1 END 2 POS. ITEM SIZE LENGTH END 1 END 2

NOTE: NO CODE (INS) (MM) NO CODE (INS) (MM)

SPOOL # 072-GL-31001/L58-S01, CONSIST OF SHEET 1 & 2 <1> AAP17 30" 2042 BEVEL BEVEL

WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY

1 30" BW FIELD

REMARKS:
SPOOL TABLE

ALL RIGHT RESERVED

LEGEND :
THIS DOCUMENT AND ANY DATA AND INFORMATION CONTAINED THEREIN ARE CONFIDENTIAL AND PROPERTY BP BERAU LTD. AND COPYRIGHT THEREIN IS VESTED
BP BERAU LTD. NO PART OF THIS DOCUMENT, DATA, INFORMATION SHALL BE DISCLOSED TO OTHERS OR REPRODUCED IN ANY MANNER OR USED FOR ANY PURPOSE
WHATSOEVER, EXCEPT WITH THE PRIOR WRITTEN PERMISSION OF BP BERAU LTD.

BUTT WELD
TANGGUH EXPANSION PROJECT
NOTES: @BP p.l.c.
SOCKET WELD
1. ALL DIMENSION, COORDINATES AND ELEVATIONS ARE IN MILLIMETER UNLESS NOTED SECURITY CLASSIFICATION
bp
OTHERWISE TOTAL FABRICATION 300.8 BP INTERNAL
2. ALL DIMENSION ARE TO CENTER LINE OR FACE OF FLANGES UNLESS NOTED OTHERWISE
JOB NO.
3. FIELD WELDINGS FOR INSTALLATION TO BE DEFINED BY CONSTRUCTION TOTAL ERECTION 30 1 0.0 SCREWED
4. HANDWHEELS OR LEVER ORIENTATION FOR VALVE TO BE CHECKED AT INSTALLATION
SPOOL CODE NR. OF WELDS WEIGHT (Kg) PAINT/INS (sq.m) C01A 04/07/2018 ISSUED FOR CONSTRUCTION 870310
5. NO MODIFICATION FOR CRITICAL LINES WITHOUT PRIOR APPROVAL ANG DYT FAJ
6. IN CASE OF DISCREPANCY BETWEEN THE LINE LIST AND DATA SHOWN ON ISO, LINE LIST REV. TITLE
OPER. DES. OPER. TEST DATE DRAWN CHKD. APPD K: FABRICATION F: ERECTION SCALE
DES. DESCRIPTION
SHALL BE DOMINANT
NPS Piping Insul. Insul. Thk. TEMP. TEST PAINT
No. PIPING ISOMETRIC
TEMP. PRESS. PRESS. PRESS. NDT
7. IN CASE OF DISCREPANCY BETWEEN THE TEST BLOCK DIAGRAM AND "TEST FLUID" OR PWHT
(Inch) Class Type (mm) (°C) (Kg/Cm2G) (Kg/Cm2G)(Kg/Cm2G) FLUID CODE CODE N.T.S.
"TEST PRESS." SHOWN ON ISO, TEST BLOCK DIAGRAM SHALL BE DOMINANT. (°C)
X SHOP WELD 072-GL-31001/L58 (Sht 1of 2 )

072-GL-31001_L58-C01A_001.DWG
DOCUMENT CLASS COMPANY DRAWING NUMBER
X FIELD WELD
REFERENCE DRAWING:
PIPING FABRICATION DRAWING NUMBER 3
- PWHT : - COORDINATE SYSTEM:
TEP-900-ISO-PP-BP4-0004
STRESS CALC. NR. PIPING GA DRAWING P&ID N. <1> DENOTES PIPE PIECE NR.
LE NO:

TEP-900-PRC-PP-BP4-0001 TEP-930-PRC-IM-BP4-0007 CONTRACTOR DRAWING NUMBER

LE NOS:

UNIT SIZE REV. NO.

- PAINT CODE : - NDT CODE :

DEFAULTS FI

30 1SA0K3 CI 160 A8 1 DENOTES PARTS LIST NR.

C01
M ODEL FI

TEP-900-SPE-PP-BP4-1009 TEP-900-PRC-PP-BP4-0001 A3
0.25 1SA0K3 CI 160 70.00 -161.60 19.30 8.50 21.23 P C+D+G+H NO A8 072-001-1B/072-001-1C 072-PID-0001-001 072 870310-PTS-900-PIP-BOK-66000

EXTRACTION DATE:

EXTRACTION TIME:
#IPLOT_spm_csdms_organization#spooling#
#IPLOT_object_name#072-GL-31001/L58# #IPLOT_spm_unit_number#072# #IPLOT_spm_fluid#GL# #IPLOT_spm_line_serial_number#31001# #IPLOT_spm_rev_code#C01# #IPLOT_spm_piping_specification#1SA0K3# #IPLOT_spm_project#870310# #IPLOT_spm_csdms_remarks## #IPLOT_spm_fab_rev_code#C01A#
 CF1: INSTALLATION ANGLE a FABRICATION MATERIALS

N
N 0° PT
NO COMPONENT DESCRIPTION
N.S.
(INS) ITEM CODE QTY WEIGHT
PIPE
270° a 90°
1 NPS:30-Thk:7.92mm-PIPE- ASTM A358 TP304/TP304L 30 AAP17 16.256 M 2394.6
A
CL.1 DUAL GRADE - EFW

180°
FITTINGS

2 NPS:30-Thk:7.92mm-90¿LONG RADIUS ELBOW - 30 FBL60 2 556.0

ASME-B16.9- ASTM A403 WP304WX/304LWX DUAL
GRADE - WLDD
A SECTION A-A
SUPPORTS

3 SADDLE FOR CRYOGENIC PIPES 1/2" - 80" NPS 30 C1-B-450-160 3 -

DETAIL A
4 AXIAL STOP FOR CRYOGENIC PIPE 2-80 NPS 30 CF1-600 1 934.5

TOTAL FABRICATION WEIGHT 3885.1

SPOOL # 072-GL-31001/L58-S01
CONT. FROM DRG.1

1143

1143
30"NS

2 24
2
90° S4
S3
3 CF1_DIA_30-1-12
3 C1_DIA_30"-1-880
5
3 7 CF1-600-30-SS
6 C1-B-450-160-30
35 INSTALLATION ANGLE = 160 Deg.
2 SEE DETAIL A
2
5 88.8°
88.8° 1 <2> 1
072-GL-31001/L58-S01 DesArea:
L08I18
4
DesArea:
3 L58M19
0
0
0
S1
1
3
1
16 4 S3
3
49
7 C1_DIA_30"-1-878

2 C1-B-450-160-30
9
9
9

185
3
S3 0NS
"
3
C1_DIA_30"-1-879 <4> 1

C1-B-450-160-30

6
0
0 CONT. ON
0
072-GL-31001/L08
E 1858.534M
N 4755.595M
5 84
88.8° 31 EL +8.361M
7
69
<3> 1 2
6
90°

CUT PIPE LENGTH

POS. ITEM SIZE LENGTH END 1 END 2 POS. ITEM SIZE LENGTH END 1 END 2

NOTE: NO CODE (INS) (MM) NO CODE (INS) (MM)

SPOOL # 072-GL-31001/L58-S01, CONSIST OF SHEET 1 & 2 <2> AAP17 30" 2214 BEVEL BEVEL
<3> AAP17 30" 12000 BEVEL BEVEL
<4> AAP17 30" 2042 BEVEL BEVEL
WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY WELD SIZE TYPE CATEGORY

2 30" BW SHOP 6 30" BW SHOP

3 30" BW SHOP 7 30" BW FIELD
4 30" BW SHOP
S1 30" FW SHOP
5 30" BW SHOP

REMARKS:
SPOOL TABLE

ALL RIGHT RESERVED

LEGEND :
THIS DOCUMENT AND ANY DATA AND INFORMATION CONTAINED THEREIN ARE CONFIDENTIAL AND PROPERTY BP BERAU LTD. AND COPYRIGHT THEREIN IS VESTED
BP BERAU LTD. NO PART OF THIS DOCUMENT, DATA, INFORMATION SHALL BE DISCLOSED TO OTHERS OR REPRODUCED IN ANY MANNER OR USED FOR ANY PURPOSE
WHATSOEVER, EXCEPT WITH THE PRIOR WRITTEN PERMISSION OF BP BERAU LTD.

BUTT WELD
TANGGUH EXPANSION PROJECT
NOTES: @BP p.l.c.
SOCKET WELD
072-GL-31001/L58-S01 180 6 4185.72 52.402288 SECURITY CLASSIFICATION
1. ALL DIMENSION, COORDINATES AND ELEVATIONS ARE IN MILLIMETER UNLESS NOTED bp
OTHERWISE TOTAL FABRICATION 3885.1 BP INTERNAL
180 6
2. ALL DIMENSION ARE TO CENTER LINE OR FACE OF FLANGES UNLESS NOTED OTHERWISE
JOB NO.
3. FIELD WELDINGS FOR INSTALLATION TO BE DEFINED BY CONSTRUCTION TOTAL ERECTION 30 1 0.0 SCREWED
4. HANDWHEELS OR LEVER ORIENTATION FOR VALVE TO BE CHECKED AT INSTALLATION
SPOOL CODE NR. OF WELDS WEIGHT (Kg) PAINT/INS (sq.m) C01A 04/07/2018 ISSUED FOR CONSTRUCTION 870310
5. NO MODIFICATION FOR CRITICAL LINES WITHOUT PRIOR APPROVAL ANG DYT FAJ
6. IN CASE OF DISCREPANCY BETWEEN THE LINE LIST AND DATA SHOWN ON ISO, LINE LIST REV. TITLE
OPER. DES. OPER. TEST DATE DRAWN CHKD. APPD K: FABRICATION F: ERECTION SCALE
DES. DESCRIPTION
SHALL BE DOMINANT
NPS Piping Insul. Insul. Thk. TEMP. TEST PAINT
No. PIPING ISOMETRIC
TEMP. PRESS. PRESS. PRESS. NDT
7. IN CASE OF DISCREPANCY BETWEEN THE TEST BLOCK DIAGRAM AND "TEST FLUID" OR PWHT
(Inch) Class Type (mm) (°C) (Kg/Cm2G) (Kg/Cm2G)(Kg/Cm2G) FLUID CODE CODE N.T.S.
"TEST PRESS." SHOWN ON ISO, TEST BLOCK DIAGRAM SHALL BE DOMINANT. (°C)
X SHOP WELD 072-GL-31001/L58 (Sht 2of 2 )

072-GL-31001_L58-C01A_002.DWG
DOCUMENT CLASS COMPANY DRAWING NUMBER
X FIELD WELD
REFERENCE DRAWING:
PIPING FABRICATION DRAWING NUMBER 3
- PWHT : - COORDINATE SYSTEM:
TEP-900-ISO-PP-BP4-0004
STRESS CALC. NR. PIPING GA DRAWING P&ID N. <1> DENOTES PIPE PIECE NR.
LE NO:

TEP-900-PRC-PP-BP4-0001 TEP-930-PRC-IM-BP4-0007 CONTRACTOR DRAWING NUMBER

LE NOS:

UNIT SIZE REV. NO.

- PAINT CODE : - NDT CODE :

DEFAULTS FI

1 DENOTES PARTS LIST NR.

C01
M ODEL FI

TEP-900-SPE-PP-BP4-1009 TEP-900-PRC-PP-BP4-0001 A3
30 1SA0K3 CI 160 70.00 -161.60 19.30 8.50 21.23 P C+D+G+H NO A8 072-001-1B/072-001-1C 072-PID-0001-001 072 870310-PTS-900-PIP-BOK-66000

EXTRACTION DATE:

EXTRACTION TIME:
#IPLOT_spm_csdms_organization#spooling#
#IPLOT_object_name#072-GL-31001/L58# #IPLOT_spm_unit_number#072# #IPLOT_spm_fluid#GL# #IPLOT_spm_line_serial_number#31001# #IPLOT_spm_rev_code#C01# #IPLOT_spm_piping_specification#1SA0K3# #IPLOT_spm_project#870310# #IPLOT_spm_csdms_remarks## #IPLOT_spm_fab_rev_code#C01A#