1) CSIRO, the Australian governmental research organisation, has recently highlighted that

many health systems around the world all face a similar set of core challenges.
Accordingly, which it is not include?

A) Fragmented, inflexible health systems than don’t allow for connected decision making,
B) The ability of healthcare providers and payers to adapt to ongoing technology
developments
C) Inequity of access and experience with a growing gap between rich and poor
D) A changing national health profile often influenced by a rise of diabetes and obesity
E) Increased consumer demand for better care – the latest and more cheaper treatments

2) To overcome the basic challenges of CSIRO,A number of changes are widely foreseen in
different countries.Which is not true?

A) A redefinition of industry boundaries.

B) An increasing mixing of public and private health systems
C) Moving from volume to value-based healthcare with old models with divergences
D) Digital innovations around effectiveness and accessibility leveraging more health data
E) Increasing patient responsibility for their own healthcare

3) Which is the perspective UK in 2030 foresees a major role for social innovation?

A) UK perspective
B) CSIRO perspective
C) EIU perspective
D) NHS perspective
E) NFS perspective

4) What is aim of digitalization?

A. To create a new brand and a technology-based life.

B. Bringing a new perspective to the world.
C. Gathering all people on one device.
D. To analyze all the data in the world.
E. Creating new job opportunities.

5) Which is not one of the benefits of digitization?

A. Productivity increase
B. Cost savings
C. Better decision making
D. New communication channel with customers
E. Globalization

6) What is the digital transformation?

A. Creating new business opportunities by establishing new and modern business

opportunities.
B. The transformation of business activities, processes, products and models to take full
advantage of the possibilities of digital technologies.
C. Replacing old and non-digital technologies in the world with new and modern ones.
D. Using quality technologies to increase production.
E. Preparing the applied sectors to the contemporary and modern World

7) What is the number of open jobs between 2018-2028?

A) 3.2 Million
B) 8 Million
C) 3.8 Million
D) 2.4 Million
E) 1.2 Million

8) Which is not correct about Automation ?

A) The first major use of automation was in detroit,Michigan,by Ford Motor Company.
B) Automation has negative impact on wages .
C) Automation is The creation and application of technology to monitor and control the production
and delivery of products and services.
D) Bigger benefit of automation is faster delivery for better and more customized products.
E) Automation is a new concept for a vast majority of the working population,especially in the
manufacturing industry.

9) Which is correct for robots?

A) Robots have emotion they can even get scared.

B) Robots can have creative skills.
C) Robots can perform dangerous tasks.
D) Robots can negotiate for raw materials.
E) If a customer needed variation on a product, the robot wouldn’t need to be programmed to create
the customized product.

10) Which of the following is the king of society Japan is targeting in the basic plan of science
and Technology?

A) Hunting society
B) Agricultural society
C) Industrial society
D) All
E) İnformation society

11) Which of the following is not one of the convenience of easy access to society?

A) Social proplems will be overcome , people will be free from various restrictios
B) Communication will be easler with the type of network that connects people
C) People, will be relleved of hard work like analyzing İnformation
D) Choosing an old methot of transportation
E) Human life will be easler with the hepl of robots

12) Which of the following can not be exemplified by economic progress?

A) The demand for energy is increasing.

B) The demand for foodstuffs is increasing
C) All
D) Rediction of GHG emissions
E) Concentration of wealt and regional inequality are growing

13) How many quintillion bytes of data is created everyday?

A) 2.5
B) 3
C) 1.5
D) 1.7
E) 2

14) Which one is not correct about big data in health care?

A) Faster and cheaper technology and data storage

B) Widespread sensing devices
C) Data sharing mandates
D) An increase in 'born' digital data
E) Unsafe service data

15) Which one is not correct about hurdless and risks in health care ?

A) unstructed data
B) data privacy
C) provide easy access to data
D) inconsistent
E) misused data
16) Which is not Factors in Wearable Tech Today ?

a) Cloud Storage
b) Quantified Self Activity
c) Gaming Industry
d) Visual & Voice Technology
e) More slowly and Expensive Hardware

17) Which one is not an input componant?

a) Ambient Sensors
b) Gesture Recognizing Devices
c) Audio Video Capturing Devices
d) Body Data Gathering Devices
e) Jawbone

18) Which one is not a concern of wearable computing?

a) Privacy
b) Security
c) Public
d) Intrusion
e) Energy

19)
I. The powder bed lowers with the part
II. Powder stock is joined by partial melting
III. New powder layer is added
IV. The new powder layer added is processed
How do you list the powder bed fusion construction step given above correctly?
A) I-III-IV-II
B) II-III-IV-I
C) II-IV-III-I
D) IV-III-I-II
E) II-I-III-IV

20) Which of the following is not true for design freedom ?

A) Minimize part count while optimizing topology.
B) No need to Design for Manufacturing & Assembly: Instead Design for
Functionality, Weight, Strength.
C) Customization without additional cost.
D) Pre-built assemblies-minimize uptime and quality control.
E) Each pıece is identıcal to each other.

21) Which of the following is not one of the 3DP-binder jetting materials?
A) ceramic
B) glass
C) nylon
D) plastic
E) composite

22) What is the Big Data process?

a) It is the analysis of all data obtained from different areas such as all shares on the internet
and databases, photo archives, log files, and making them useful.
b) Creating much more of the total data created throughout human history.
c) Distributing data to all devices.
d) Randomly process data.
e) Making sure everyone has access to data.

23) Which is not one of the features of big data?

a) Velocity
b) Variety
c) Volume
d) Verification
e) Easily accessible

24) What are the types of data?

a) Precise and Relative
b) True and False
c) Quantitative and Qualitative
d) Fact and Event
e) Open and Close
25) What does big data cover?
a) It only covers data on phones.
b) From Big Data spreadsheets to databases, from servers to cloud It covers all kinds of data
collected up to services.
c) It includes required data.
d) It contains data of only one field.
e) It only includes the data people want.

26) How much information is generated per second for a person in 2020?
a) 1.5 Megabyte
b) 2.4 Megabyte
c) 0.4 Megabyte
d) 1.7 Megabyte
e) 0.002 Megabyte

27) What is the society 5.0?

a) Information society
b) Agricultural society
c) Hunting society
d) Industrial society
e) New society

28) How Society 5.0 works ?

a) People would access a cloud service in cyberspace via the Internet and search for,
retrieve, and analyze information or data.
b) A huge amount of information from sensors in physical space is accumulated in
cyberspace. In cyberspace, this big data is analyzed by artificial intelligence, and the
analysis results are fed back to humans in physical space in various forms.
c) Data collected from people is collected in the cloud, analyzed and sent back to people.
d) Society 5.0 only receives certain data and it provides useful data to people.
e) Data is processed indirectly in community 5.0.

29) Which of the following is not one of the new values in mobility in
community 5.0?
a) Thanks to autonomous driving, traveling without traffic will be enjoyable and
accidents will be reduced
b) Combine car sharing services, public transportation etc. thereby travels will be made
more smoothly
c) The elderly and physically disabled individuals will be enabled to move on their own
using self-driving wheelchairs
d) By sharing physiological and medical data, optimum treatment is provided
everywhere
e) Providing travel routes according to personal preferences,weather, and instant traffic
etc. thereby making travel and sightseeing easier by proposing the most suitable plans

30) Which of the following is not a robot?

a) Manipulator
b) Legged Robot
c) Television
d) Unmanned Aerial Vehicle
e) Autonomous Underwater Vehicle

31) The National Association of manufacturers (NAM) said there were 488,000 unfilled
manufacturing jobs across the country at the end of the fourth quarter of 2020.3, but what did
producers not find?
a) Skilled workers
b) Friendly worker
c) Low-wage workers
d) Maneger
e) Factory

32) What is the real cause of the crisis in production?

a) Stagnant level of laboreer training coupled with the lack of education on the benefits of
automation.
b) Budget shortages
c) Manufacturers reluctance
d) Multiplicity of raw material
e) Number of workers at the place of production

33) Which of the following was NOT among the fastest-growing

jobs of 2000-2010?
A. Network administrator
B. Dental hygienist
C. Radio announcer
D. Software engineer
E. Nurse practitioner

34) Which of the following jobs did NOT exist a decade ago?
A. Nurse practitioner
B. Radio announcer
C. App developer
D. Social media influencer
E. Dental hygienist

35) According to the text, which of the following skills is

considered important in the modern workplace?
A. Cooking skills
B. Time management skills
C. Rote learning skills
D. Driving skills
E. Singing skills

36)
I-Automation
II-Robotics
III-Autonomous Mobility
IV-Transformation
Which are amoung the key technologies supporting smart factories?
A) I-II
B) I-III
C) I-II-III-IV
D) III-IV
E) I-II-III
37) What is the another name for additive manufacturing?
A) 8D sound
B) Virtual Reality
C) Quality Manufacture
D) 3D Printing
E) Robotic Technology

38) Which is the following is not an example of limited prototype use?

A) Instructing skilled automatic operators whose jobs cannot be automated.
B) Training on how to produce new items including visualization of results.
C) Improving quality control.
D) Finding ways to improve the workflow.
E) Complex maintenance and repair, such as repairing a printer through interaction with a remote
specialist providing guidance for repair tasks.

39) What is the biggest aim of Industry 4.0?

A) It is to produce better quality,
cheaper, faster and less wasteful
production.
B) It is to increase the manpower.
C) Increasing production depending on steam
power.
D) With the development of the sector,
providing cars that can only be accessed by the
elite.
E) To increase production by using electronic
and information technologies.

40) Where did the bourgeois class first begin?

A) Industry 3.0
B) Industry 1.0
C) Industry 4.0
D) Industry 2.0
E) None of the above.
41) Which of the following does not count among the
building blocks of industry 4.0?
A) Simülation
B) Cloud computing
C) Horizontal and vertical integration
D) Autonomous Robots
E) Steam

42) Who is the name behind the idea of AI ?

a) John McCarthy
b) Bill Gates
c) Otto Hahn
d) Linus Torvalds
e) Nikola Tesla

43) How many are there kinds of artificial intelligence ?

a) 2
b) 3
c) 4
d) 1
e) 5

44) "Robotics work implies ......... , since it involves mechanical, electronics, and system design
work." Which word is suitable for the gap?

a) deep learning
b) big data
c) mechatronics
d) mathematic
e) artificial intelligence

45) Which is not an industry 4.0 basic elements?

A) Interoperability
B) Autonomous Management
C) Steam Engine Era
D) Real-Time Capability
E) All

46) Which one is not advantages of Endustry 4.0?

A) Facilitating the heat of the heat
B) Gaining self-awareness of systems and components
C) The system is sustainable with environmentally friendly and
resourcesaving behaviors
D) Ensuring lower efficiency
E) Development of new service and business models

47) Which of the following about Industry 1.0 is wrong?

A) Automobiles started to be produced with the serial production
line that Henry Ford established.
B) The Industrial Revolution started in England.
C) This period is also known as "Steam Engine Era".
D) A new bourgeois class was born and the population shifted
from rural to urban centers.

48) What Is Mechatronics?

A) Mechatronics is a blend of mechanical engineering, electrical engineering,
computer control and information technology.
B) Mechatronics is a concept for working smarter and doing the most work costly, not more.
C) Mechatronics isn’t a design process to create more functional and adaptable products.
D) Mechatronics experts create more difficult systems at the intersection of mechanics,
electronics and computing.
E) Mechatronics is an insignificant basis for the expected growth in automation and
manufacturing.

49) The mechatronics is an interdisciplinary field in which the disciplines

those act together are ________
A) Mechanical systems and Electronic systems
B) Mechanical systems and Information technology
C) Electronic systems and Information technology
D) Mechanical systems, Electronic systems and Information technology
E) None of them

50) Which one is the industries involved include in Mechatronic?

A) Robotics
B) Medical equipment
C) Assistive technology
D) Manufacturing
E) All
51) How many job postings will there be between 2018-2028 ?
A) 2.2 Million
B) 2.4 Million
C) 2.3 Million
D)2.5 Million
E) 1.9 Million

52)How did robots allow workers to move into more skilled roles ?
A) By working higher.
B) Using more advanced technology
C) By reducing the workforce.
D) By pushing people to make them stronger.
E) By taking the repetitive and dangerous jobs, robots have allowed workers to advance into
more skilled roles.

53) What is a robot ?

A) A robot can be designed as resembled as human or it can be designed as a standard machine
look alike.
B) Robots are a supernatural phenomenon.
C) Robots cannot be identified.
D) Robots have come from space.
E) Robots are a source of radiation.

54) Which is not one of the popular careers in 2009?

A) healthcare occupations
B) farming
C) engineers
D) genetic counselors
E) mediators

55) Which is not one of the high-tech professions that emerged with the internet?
A) social media manager
B) virtual assistant
C) app development, designer and manager
D) engineer
E) cloud computing specialist
56) Which one is not the some skills you will need to develop and keep up if you want to succeed
professionally in the future?
A) Critical Thinking
B) Mental Elasticity and Creativity
C) EQ and Interpersonal Skills
D) STEAM and SMAC
E) Less Sleep

57) Which of the following is not included with the digitalization features ?
A) Enabling the customers to contact their company with a digital presence
B) Ensuring customer satisfaction and loyalty through digital channels
C) Offering a quicker access to the knowledge of the customers' comments about the products by
going to their homes and asking them face to face.
D) Opening up new sales channels.
E) Developing new business models

58) Which of the following is considered to contribute in fulfilling the cost-saving benefit for
digitalization ?
A) Productivity increase
B) Number of personnel increase
C) The complexity of using the digitalization tools
D) Time of decision making increase
E) Lack of experience for the customers to use the digital technologies

59) All the following help in increasing the innovation benefit for digitalization EXCEPT :
A) Teamwork
B) Following the latest developed technology and keeping up with it
C) Harmony between the team workers
D) Continuous debating between the team workers
E) Producing innovative ideas with teamwork by companies

60) CSIRO, the Australian government research organisation, has recently highlighted that many
health systems around the world all face a similar set of core challenges. Which of the following
is NOT one of them?
A) The latest and more expensive treatments
B) A changing national health profile influenced by a rise of diabetes and obesity
C) Inequality of access and experience between people
D) A redefinition of industry boundaries
E) Fragmented, inflexible health systems than don't allow for connected decision making

61) Which of the following is NOT among the global healthcare issues?
A) Inadequate sanitary conditions
B) Poor diets and sedentary lifestyle
C) Rising temperatures
D) Chronic diseases
E) Get vaccinated

62) Which of the following is NOT one of the effects of the post genomic medicine's on
consumers?
A) Increase knowledge
B) Predictive
C) Consumer empowerment
D) Lifestyle management
E) Changing how medicine is viewed
63) Which of the following is not suitable for digital transformation?
A) The transformation of business activities, processes, products and models to take the
possibilities of digital technologies.
B) Digital transformation makes life difficult.
C) Digital transformation makes more cost saving.
D) Digital transformation makes more efficient production.
E) Digital transformation makes more different ways of making money.

64) Which one is not the importance and benefits of digitalization?

A) Cost savings
B) Innovation increase
C) Improvement in working conditions
D) Productivity decrease
E) Digital visibility

65) Which of the following is not an example of digitalization in finance?

A) Not receiving and sending online payments
B) Digital invoices
C) E-accounting applications
D) Digital proformas
E) E-tax

66) When was the first wearables invented?

A) 1960's and 70's
B) 1940's and 50's
C) 1980's and 90's
D) 1970's and 80's
E) 2000's

67) Which isn't important in wearable technology?

A) Wearables are compact
B) Smart
C) Expensivity
D) High operations efficiencies
E) Ubiquitous connectivity

68) Which of the following is not a wearable technology product?

A) Finger mount keyboard
B) Smart wristband
C) Jewelry
D) 3D printer
E) Smart watch

69) Which one is NOT an example for Ambient Sensors?

A) Accelerometer
B) Gyroscope
C) Magnetometer
D) Barometer
E) MC10 Sensor

70) Which one is NOT an example for Traditional Inputs/Capture?

A) Microphone
B) Camera
C) Wi-fi
D) Light Sensor
E) GPS

71) Which one is NOT an example for Wearable Computing Applications?

A) Life Logging
B) Activity Tracking/Monitoring
C) Machine Learning Algorithms
D) Gesture Recognizing
E) Healthcare

72) What is the correct order for “Information Continuum” ?

a) Wisdom – Insight – Knowledge – Information - Data
b) Knowledge – Wisdom – Data – Insight - Information
c) Data – Information – Knowledge – Insight - Wisdom
d) Data – Wisdom – Information – Insight – Knowledge
e) Information – Knowledge – Data – Insight – Wisdom

73) Which one of the following is NOT one of the 4 V’s of Big data?
a) Volume
b) Variety
c) Veracity
d) Velocity
e) Viscosity

74) Which one of the following is NOT one of The Health Care Big Data Horizon?
a) Integrate patient-generated health data and the Internet of Things (IoT)
b) Incorporate environmental and socioeconomic data in patient diagnosis and treatment
c) Perform data analysis to explore patterns (pattern recognition, predictive analytics)
d) Develop personalized care specific to each patient’s particular needs (Precision Medicine)
e) Leverage the Electronic Health Record to improve diagnosis, outcomes, and reduce costs

75) Which of the following is a 3D printing type used in VAT Photopolymerization?

A) Selective Laser Sintering (SLS)
B) Selective Laser Melting (SLM)
C) Fused Deposition Modeling (FDM)
D) Stereolithography (SL)
E) Laminated Object Manufacturing (LOM)

76) Which of the following is not one of the materials used for the binder jetting?
A) Ceramic
B) Paper
C) Composite
D) Glass
E) Metal

77) Which of the following is not one of the principles of 3D printing?

A) Assembly is required
B) No need to design for manufacturing
C) Producing 2D layers is relatively simple
D) Parts usually need to be supported from below
E) Stacking two-dimensional layers to form three-dimensional objects

78)
1.Digital visibility
2.Better decision making
3.Productivity increase
4. Productivity decrease
Which statement is/are benefits of digilization ?
A. 1,2 and 3
B. 1 and 2
C. 2 and 3
D. 3 and 4
E. 1,2,3 and 4

79) Which statement is not aim of digitilization ?

A. Coverting analog data into digital data that computers can understand
B. Digitization of data makes it more possible to archive,
C. Easily acces and share.
D. make it difficult to Access
E. to make more easily accessible

80) Which statement is not benefits of digilization ?

A. Productivity increase
B. Cost Saving
C. Innovation increase
D. Improvement in working conditions
E. Production waste

81) Which one of the following sentences is false about resolution of social problem?
A) Reduction of GHG emissions
B) Increased production and reduced loss of foodstuffs
C) Promotion of sustainable industrialization
D) Redustribution of wealth
E) Remove controls

82) Which one of the following sentences is false about Society 5?

A) Make movement pleasant without congestion and reduce accidents through autonomous driving.
B) Society 5.0 doesn't achieves a high degree of convergence between cyberspace
C) It balances economic advancement with the resolution of social problems.
D) A human-centered society.
E) A huge amount of information from sensors in physical space is accumulated in cyberspace.

83) Which one of the following sentences is important for Society 5.0 in technological term?
A) IoT
B) Artifical Intelligence
C) Big Data
D) Robotics
E) All

84) What does society 3.0 refer to?

a) Agricultural society
b) Industrial society
c) Information society
d) Hunting society
e) Human society

85) What is society 5.0?

a) society 5.0 archives a high degree of convergence between cyberspace and physical space
b) use robots to ease the on-sit burden of healthcare and caregiving
c) make movement pleasant without congestion and reduce accidents through autonomous driving
d) a human centered society that balances economic advancement with the resolution of social
problems by a sistem that highly integrates cyberspace and physical space
e) none of them

86) When the society 5.0 was proposed?

a) the 5th science and technology basic plan
b) the 7th science and technology basic plan
c) the 4th science and technology basic plan
d) the second science and technology basic plan
e) none of them
87) By whom was the word mechatronics invented?
a) Tetsuro Mori
b) Larry Page
c) Jeff Bezos
d) Sergey Brin
e) Mukesh Ambani

88) Since the 19th century, production robots have been replacing employees. Which of the
following options is NOT one of the reasons for this?
a) They work more precisely than humans and cost less.
b) If one machine makes a mistake, all autonomous systems will keep this in mind and will avoid the
same mistake the next time.
c) Robots do not need a lunch break
d) Factory workers work without speaking.
e) Robots do not receive a salary and do not have problems such as work accidents.

89) Which profession is not among those who will be unemployed because of robots?
a) call center employee
b) drivers
c) engineers
d) referees
e) secretaries

90) Where did the industrial revolution begin?

A) Germany
B) Turkey
C) England
D) Italy
E) Portugal

91) Which centuries did the industrial revolution begin?

A)20-21
B)19-20
C)14-15
D)18-19
E)13-14

92) Time Money Productivence ---> ___?___

Which should come instead of the question mark?
A) Power
B) War
C) Peace
D) Defeat
E) Money

93) Which of the following is an accurate data about the field of social work?
a) Social work is growing at a rate of 50% over the next decade.
b) According to to research of the Times newspaper, the social work has declined by 5% in the last ten
years.
c) Social work is growing very slowly to other professions.
d) According to U.S. Bureau of Labor Statistics, the field of social work is growing at a rate of 16%
overthe next decade.
e) According to a 2019 research of the economic statistics, the field of social works growing at a rate of
16%ovethe next decade.

94) Which is not a subject we examine unter the heading of social work?
a) Educational Support Social Worker
b) Hospice Care Social Worker
c) Disabilities Support Social Worker
d) Medical Discharge Planner
e) Support for athletes social worker

95) Which one is one of the charateristics of a social worker?

a) Sullen and rude
b) Supportive and helpful
c) Reckless
d) Upbraiding
e) Impatient

96) Which of the following cannot be an example of sensing devices?

A) Smart watches
B) Smart jewelry
C) Fitness trackers
D) Sport watches
E) Smart pants

97) Which of the following is not in the big data field in healthcare?
A) Faster and cheaper technology and data storage
B) Widespread sensing devices
C) Greater availability of data via repositories
D) A more expensive data storage space.
E) Data sharing mandates

98) Which of the following is Accuracy not related to the reliability of the data?
A) Origin
B) Authenticity
C) Measurable
D) Completeness
E) Integrity

99) What is Wearable Technology ?

A) Wearable technology is Collect Big Data or obtain access to a repository.
B) Wearable technology is Identify potential correlations.
C) Wearable technology (which is often called as wearable devices) as
the name suggest is the technology which can be worn by people.
D) This integrates artificial intelligence, machine learning, automation of
knowledge work and machine-to-machine communication with the
manufacturing process.
E) Wearable technology concept integrates all these technologies to produce
a new business model for industry.

100) Which one is not factors in Wearable Tech. Today ?

A) Faster and cheaper Hardware.
B) Cloud Storage.
C) Location Data.
D) Gaming İndusrty.
E) Eliminate manual shortage.

101) Which one is not the Importance of Wearable Technology?

A) Transportation.
B) Smart.
C) Wearables are compact
D) High operational efficiencies.
E) Ubiquitous connectivity.
102) What is the term for a computer that performs tasks normally associated with humans?
A) Virtual Reality
B) Genetic Engineering
C) Augmented Reality
D) Artifical Intelligence
E) Chemical Engineer

103) What is the name of the headset for Virtual Reality?

A) Head Mounted Display
B) Virtual Reality Goggles
C) Virtual Reality Headset
D) Virtual Display Headset
E) Head Mounted Headset

104) Which one could be one the factors in wearable technologies?

a) Special Customization
b) New Operating System
c) Visual & Voice Technology
d) Modern Design
e) Additional Smart Device

105) Which is Classification of Wearable Devices not true?

a) Gesture Recognizers
b) GPS coordinator
c) Life Logger
d) Assistant
e) Entertainer

106) What things can be used for wearable computing?

a) glasses
b) different clothes(socks, t-shirt, shoes)
c) bijouterie(ring, bracelet, necklace)
d) armband, headband
e) all corect

107) What is the true definition of “Virtualization” in Industry 4.0?

A) The system consists of connecting sensor data with virtual facility and
simulation models.
B) It is the ability of cyber-physical systems to make their own decisions within smart
factories.
C) People and smart factory services are provided over the Internet of services.
D) Provides flexible adaptation system to smart factories for the changing requirements of
individual modules.
E) It involves the ability of cyber-physical systems (e.g.workpiece carriers, assembly stations
and products) to communicate with each other of people and smart factories over the
Internet of Things and Services.

108) What is the dezadvantage of Industry 4.0?

A) Increasing flexibility in production
B) Gaining self-awareness of systems and components
C) The system is sustainable with environmentally friendly and resourcesaving behaviors
D) Development of new service and business models
E) With robots taking over production, the need for manpower will decrease and robots will in
a sense dismiss people from their jobs.
109) What is the definition of Industry 2.0 ?
A) Electricity allows for mass production with assembly lines
B) IT and computer technology are used to automate processes
C) Enhancing automation and connectivity with CPS
D) Steam and water power are used to mechanize production
E) Industrial power was obtained by transferring the torque obtained from natural
environmental elements such as steam, water and wind to a system.

110) What is not an example of a social job?

A) Crisis counselor
B) Hospital Social Worker
C) Computer Engineer
D) Job Coach Social Worker
E) High School Guidance Counselor

111) According to the U.S Bureau of Labor Statisctics, the field of nsocial worker is growing at a
rate of:
A) 10%
B) 5%
C) 15%
D) 16%
E) 14%

112) What is the growth outlook of home healthcare social worker from 2016-2026?
A) +48.6%
B) +45.6%
C) +43.6%
D) +42.6%
E) +43.6%

113)
I. Powder stock is joined by partial melting
II. The powder bed lowers with the part
III. New layer of powder is added and process repeated
Which of the above is SLS - Selective Laser Sintering steps ?
A) Only I
B) II and III
C) I and III
D) Only III
E) ALL

114) Which of the following is not one of the 3d printing categories ?

A) Vat
B) Powder Bed Fusion
C) Material Extrusion
D) Lamp
E) Sheet
115)
I. Paper
II. Plastic
III. Metal
IV. Steel
V. Ceramic
Which of the above is not used in Laminated
Object Production?
A) I, II and III
B) III, IV and V
C) IV and V
D) I and V
E) ALL

116) According to the adb labor statistics bureau, what percentage of social work does it increase
in the next 10 years?
A)%18
B)%17
C)%16
D)%15
E)%14

117) Which of the following cannot be associated with social work?

A)Contributes to the creation of the social order of the society.
B)Provides psychological support to the individual.
C)It regulates the economy and increases the society and the well-being of the individual.
D)It trains individuals who are beneficial to society.
E)It tries to keep the person competent in the field of education.

118) What social work deals with individuals with physical or mental disabilities?
A) Child and Family Services Worker
B) Public Library Social Worker
C) Hospital Social Worker
D) Crisis Counselor
E) Physical Rehab Social Worker

119) How much is the budget allocated for space?

A) Less than 1% of the US Federal budget.
B) More than 10% of the turkey budget.
C) Less than 5% of New York City budget.
D) More than 0.001% of the Canada budget.
E) Less than 95% of the Chinese budget.

120) Which one is not connected to satellites today?

A) Communication
B) Navigation
C) Weather forecasting
D) Environmental monitoring
E) Bourse

121) Which country is the International Space Station not run by?
A) Russia
B) China
C) Japan
D) Europe
E) USA
122) How many observation satellites are there in Turkey?
A) 5
B) 4
C) 6
D) 3
E) 1

123) When the first satellite was launched in Turkey?

A) 25 September 1995
B) 6 March 1856
C) 10 August 1994
D) 23 June 1995
E) 1 February 1899

124) When did the US Department of Defense announce that the space military units were
formed?
A) 25 December 2019
B) 15 September 2008
C) 4 January 1994
D) 28 February 2000
E) 16 July 2020

125) When are Türksat 5A and 5B satellites intended to be sent to space?

A) Türksat 5A is aimed to be sent to space in 2019 and Türksat 5B in 2023
B) Türksat 5A is aimed to be sent to space in 2032 and Türksat 5B in 2033
C) Türksat 5A is aimed to be sent to space in 2020 and Türksat 5B in 2021
D) Türksat 5A is aimed to be sent to space in 2025 and Türksat 5B in 2027
E) Türksat 5A is aimed to be sent to space in 2024 and Türksat 5B in 2029

126) How many communications satellite fleet are there in Turkey?

A) 5
B) 4
C) 2
D) 6
E) 3

127) Which are active satellites meets our communication needs?

A) Göktürk-1 and Göktürk-2
B) Türksat 5A and 5B
C) Türksat 3A, 4A and 4B
D) Bilsat and Türksat 2A
E) Türksat 1B and 1C

128) Which country is flown a lunar orbiting mission?

A) Canada
B) Egypt
C) Bulgaria
D) India
E) USA
 1. The 1st Industrial Revolution started with the use of which in
Using steam power

2. In a competitive, rapidly evolving work environment, which aspects did not need to
be developed by those working tor new job postt:ions?
Complying with working hours

3. What is the production method that comes to mind when it comes to 3d printer?
Additive manufacturing

4. In which to extract information using BIG DATA is incorrectly expressed.

As our whole lives become automated, from cars to health insurance or employment, we will
probably all continue tol ive unaffected by the quantization bias.

5. In the “SLS- Selective Laser Sintering” method,which material is not used in…

Titanyum

6. Which of the following materials is nt used in “3dp-binder jetting” printer system

Alla of them

7. BIG DATA Usage Areas are incorrectly stated in the following.

Keeping rarely accessed data in data stares with high starage casts.

8. 2007 2007 2007 q1 q2 q3 q4

The change of software used in phones over the years.

9. Using big data, Netflix estimates how many times its share value on the stock market will
increase in a fewyears.

5 times

10. In Society 5.0, in which new values in the field of production are wrongly expressed.

sera gazı emısyonlarının ve giderlerinin arttırılmasına, müşteri memnunıyetinin önemsenmemesıne

ve tüketimi canlandırmaya yardımcı olacaktır.
 11. What has digitalizalion not changed in our lives?

Complicated employees' work

12. Which material is not used in production in "FDM - Fused Deposition Modeling" method

aluminyum

13. Difficulties Big Data. İn which one is wrongly stated.

Low cost

14. Society 5.0 Aims To Create A Human-Centered Society Which of the following is
wrongly stated

It is a society that focuses on every human being, not a future controlled and monitored by
artificial intelli5ence and robots.

15. In Sociely 5.0, in which new values in ıtıe field of production are wrnrıg expressed.

sera gazı emisyonlarının ve gıderlerinin dfilırılmasına, mo,101 momnuniyetinin

önemsonmcmcsıne ve tüketımi canlandırmaya yard rncı olacaktı

16. In Society 5.0, in whidı new values are wrongly expressed in the field of food

products

These solutıons can help investıgate food waste and make the food ındustry more

damaging

17. Which material is used in modelling in Polyjet-Multijet printers

Resin

18. While comparing the 3D printer and the classical method, which one is correctly expressed
The strength of the parts made from 3D printers is very low

19. Which material is not used in production in "SLM - Selective Laser Melting" methcxl
Tin

20. In Society 5.0, in which new values are wrongly expressed in the fıeld of food products
these solutions can help investigate food waste and make the food industry more damaging.

21. SAME AS BEFORE

 22. While comparing the 3D printer and the classical method, which one is correctly expressed.
The strength of the parts made from 3D printers is very low

23. Which of the new values in the field of society 5.0 is wrong.

While helping to increase CO2 emissions, reducing consumption by reducing regional recovery.

24. In which of the new values in the fields of health and care services are expressed incorrectly
in Socety 5.0.
With the help of robots, you will get rid of life support and loneliness and you will be able tol ive a con

25. Which will bring to Turkey has expressed in the wrong industry 4.0?

Employment in industry will increase.

26. SAME

27. Which of the industry 4,0 employment policies is wrong?

Competent human resources are needed in using autonomous vehicles.

28. Which of the methods it uses to balancing economic development and solving social
problems with society 5.0 is fully expressed.

(??) New Technologies such as IoT, robotics, …

29. Which in the materials is used in “DED- Directed Energy Deposition” method

Metal

30. Which of the new values in the field of disaster prevention in society 5.0 is wrongly
expressed

Through artifical intelligence analysis, structure-based …

31. Which of the new values in the fıeld of Society 5.0 is wrong

While helping to increase CO2 emissions, reducing consumption by reducing regional recovery.
 32. What will industry 4.0 not change?

Inefficiency

33. SAME

34. Which of the following materials is not used in the stereof… (SL)

method?

IRON AND STEEL

35. Which of the Industry 4.0 employment policies is wrong?

Competent human resources are needed in using autonomous vehicles

36. Which ofthe lndustry 4.0 employment policies is wrong?

Competent human resources are needed in autonomous vehicles

37. Which of the following are the basic Principles of Industry 4.0

Modularity

38. Which will bring ta Turkey has expressed in the wrong lndustry 4.0

Employment in industry will increase.

39. In Society 5.0, in which new values are wrongly expressed in the field of food

products

These solutions can help investigate food waste and maket he food industry more

damaging.

40. Which of the new values in the field of disaster prevention in society 5.0 is wrongly
expressed?
Through artifical intelligence analysis, structure-based …

41. Which of the following is not an lndustry 4.0 Advantage?

The systems and their components are the same.

42. Which of the methods it uses to balancing economic development and solving social
problems with societty 5.0 is

New Technologies such as IoT, robotics , artificial intelligence and big data continue to advance.
 43. What does not have new values in the energy field in society 5.0?

Energy analysis of every household will not be made through AI

44. What does not have new values in the enregy field in society 5.0?

Energy analysis of every household will not be made through AI

45. Society 5.0 aims to create a human-centered society which of the following is wrongly stated

It is a society that focuses on every human being, not a future controlled and monitored by artificial

intelli5ence and robots.

46. The industrial revolution, which is now called industry 2.0, started with the application of
which in the industry.

With the start of mass production

47. Which will bring ta Turkey has expressed in the wrong lndustry 4.0?

Employment in industry will increase.

48. How did the industry 3.0 process begin?

With the integrated use of electronic and information tech.

49. Which of the methods it uses to balancing economic development and solving social
problems with society 5.0 is fully expressed.

New Technologies such as IoT

50. In Which of the new values in the fields of health and care services are expressed

With the help of robots, you will get rid of life support and loneliness

51. Which of the industry 4.0 employment policies is wrong?

Competent human resources are needed in using autonomous

vehicles.

52. What has society 2.0 brought to humanity?

Beginning of agriculture
 53. The industrial revolution, which is now called industry 2.0, started with the application of
which in the industry?
With the start of mass production

54. Which of the following are the basic Principles of industry 4.0 ?

modularity

55. What profession is not one of the popular careers in 2009?

Farming

56. Companies: They are constantly asking the following questions and digitizing their
production in order to find answers to these questions. Which option is given incorrectly?

Which good should we produce?

57. Augmented reality is a digital layer of the real World. In which areas of use of augmented
reality in producti

Instructing automated systems

58. Which of the following did the Rolls-Royce firm do, based on big

data? Predictive maintenance

59. In shaping the Industrial internet of things, which statement is wrong?

Using 3d printers in the workplace

60. What is society 5.0.

It refers to a human-centered society that balances economic

61. In which to develop Customer Service Skills is

lacking.

Circulation

62. Sources of big data are not

Lecture notes
 63. If you want to be successful in the modern workplace, the most important skills you need to develop

Use of computer

64. Which type of printer is ABS filament used in?

FDM printer

65. In which is the statement “How does society 5.0 work” incorrectly?
Human being start living in cyberspace

66. Same as 1. Question

67. In which is the statement “How does society 5.0 work” incorrectly?

Human being start living in cyberspace

68. What has Society 2.0 brought to humanity?

Beginning of agriculture.

69. Society1.0 is a general name given to which communities? society1.0 Refers to the

hunter/gatherer society.

70. What will industry 4.0 not change? Inefficency

71. How did the Industry 3.0 process begin?

With the integrated use of electronic and information Technologies.

72. Among the 9 technologies, which are called the building blocks of industry 4.0, 3 of them are listed.

three-dimensional manufacturing, horizontal or vertical integration, internet of industrial objects.