Scribd Logo
Upload

Welcome to Scribd!

  • 4 views

    1.sa 516 110324-N

    Uploaded by

    mahesh kumar
    The document provides technical delivery conditions for carbon steel plate to be used for steam drum construction including grade, size, quantity, specifications, manufacturing requirements, heat treatment, quality checks, material certification requirements, markings, inspection requirements and end use.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    1.sa 516 110324-N

    Uploaded by

    mahesh kumar
    4 views2 pages
    The document provides technical delivery conditions for carbon steel plate to be used for steam drum construction including grade, size, quantity, specifications, manufacturing requirements, heat treatment, quality checks, material certification requirements, markings, inspection requirements and end use.

    Original Title

    1.SA 516 110324-N (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides technical delivery conditions for carbon steel plate to be used for steam drum construction including grade, size, quantity, specifications, manufacturing requirements, heat treatment, quality checks, material certification requirements, markings, inspection requirements and end use.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    4 views2 pages

    1.sa 516 110324-N

    Uploaded by

    mahesh kumar
    The document provides technical delivery conditions for carbon steel plate to be used for steam drum construction including grade, size, quantity, specifications, manufacturing requirements, heat treatment, quality checks, material certification requirements, markings, inspection requirements and end use.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    ENMAS

    EPC
    POWER
    PROJECTS
    LIMITED
    CHENNAI -
    600 008,
    INDIA.
    TECHNICAL DELIVERY CONDITIONS FOR CARBON
    STEEL PLATE A 516/ SA 516
    QUALITY ASSURANCE AND CONTROL
    TDC NO:
    REV. 00
    EEPC/AC01W1/TDC/PC/343/I/0002
    Page 1 of 1
    PROJECT: M/s 1 X 25 TPH WHRB BOILER, UNITED KINGDOM
    Date: 14.03.2024
    Carbon Steel Plate
    Grade, Size & Quantity As per PO.
    Name of Product Carbon Steel Plate
    Specification SA-516
    Specification for General
    SA-20
    Requirements
    Code ASME Sec II Part A, Latest Edition
    Delivery Condition Normalized Condition
    Chemical Composition As per Material Specification
    Mechanical Requirements As per Material Specification
    The steel shall be killed and shall conform to the fine austenitic grain size requirement of
    Manufacturing
    specification A20/A20M.
    Heat Treatment Furnace Normalized
    Impact Testing Not Required
    NDT UT Shall be carried out in accordance with SA 578 Level B
    Plates shall be free of injurious defects and imperfections. It should have a workmanlike
    Quality
    finish. No repair by welding is allowed.
    Dimension Tolerance As per Clause 14 of SA-20.
    Yes Required. As per Clause 19 of SA-20. Form IV with EN 10204 Type 3.1 Certificate
    Material Test Certificate required. Plate manufacturer shall have quality system certified by agencies accredited by
    UKAS.
    Yes Required. As per Clause 13 of SA-20. As a minimum the following must be marked.
    1. Material Specification & Grade, Type and Class, NDE.
    Markings 2. Heat Number & Plate Number.
    3. Name or mark of the manufacturer.
    4. Heat Treatment.
    No Special Packing, but material shall be supplied without any damage during
    Packing
    transportation.
    Material shall be supplied with original Manufacturer's Test report. Inspection shall be
    Inspection requirement
    done at your place by our Inspector.
    End use of material Material shall be used for Steam Drum Construction in accordance with EN 12952.
    Finish

    Description Name Department Signature with Date

    Prepared by A. Kalaiyarasan QA&C

    Checked by J. Pavulraj QA&C

    Reviewed by S.Rameshkumar ENGINEERING

    Approved by B.K. Sahu QA&C

    You might also like