Bolt Torque Calculator

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

(/online-bolt-

Bolt torque calculator metric (vdi 2230) torque-calculator-


metric-vdi-
2330/index.php?
alreadyRedirected=true)
(/online-bolt-
torque-calculator-
metric-vdi-
2330/us/index.php)

(/Calculo_par_de_Apriete/

Instructions Formula Send us your comment

Thread Diameter M16X1.5

Standard

Strength Class 8.8 (Rp0,2 ) 660 N /mm


2

Friction Conditions Zinc Coated / Dry (μmin ) 0.14

Proof load % 90 Recommended values: 75 % proof load for


nonpermanent connections and reused
fasteners. 90 % proof load for permanent
connections.

Torque 249.79 Newton ·


Calculate
Meter

Fmzul 87658.59 Newton;

Check Screw Clearance with torque tool

Download (https://www.3dcontentcentral.es/download-model.aspx?catalogid=171&id=703417)
How it works

This calculator is based on the VDI 2230 guideline. In this guideline the torque required it is defined by the following expression:

Where
P : pitch of the thread in milimeters; it has been obtained from DIN 13-28 (ISO Metric Screw Threads; Coarse and Fine Screw Threads
from 1 to 250 mm)
μG is the coefficient of friction in the thread (in this case we have considered μG and μK equal and obtained from UNE 17-108-81)

μK is the coefficient of friction in screw head (in this case we have considered μG and μK equal and obtained from UNE 17-108-81)

d2 pitch diameter of the bolt head in mm; it has been obtained from DIN 13-28 (ISO Metric Screw Threads; Coarse and Fine Screw

Threads from 1 to 250 mm)


DKm Effective diameter for the friction moment at the bolt head or or nut bearing area and it is defined by the following expression

Where

dw is the outside diameter of the plane head bearing surface of the bolt; generally bearing surface in this case we have considered
similar to the distance between flat surfaces of the head (head size), and it has been obtained from the following standards: DIN
7623 ,DIN 7643, DIN 7991, DIN 908, DIN 912, DIN 931, DIN 933, DIN 934, DIN 960, DIN 961, DIN 985, ISO 10642, ISO 4014, ISO
4017, ISO 4032, ISO 4762, ISO 7040, ISO 8676, ISO 8765, MBN 10105
DKi is the inside diameter of the bearing area,we have considered the same as d2 and it has been obtained from DIN 13-28 (ISO

Metric Screw Threads; Coarse and Fine Screw Threads from 1 to 250 mm)
FM zul Permissible assembly preload defined by the following expressions

Where

ν : utilization fator of yield point stress (limit of full plasticization of th cross section at risk)durin tightening. It is defined by user
in the proof load percentage
Rp0,2 0,2% proof strength of the bolt according to DIN EN ISO 898-1; in this case we have used the values of proof load from

the standards SAE and ASTM and converted to the proper units N /mm2
A0 Appropriate minimum cross sectional area of the bolt

d2 pitch diameter of the bolt head in mm; it has been obtained from DIN 13-28 (ISO Metric Screw Threads; Coarse and Fine
Screw Threads from 1 to 250 mm)
d0 diameter at the relevant smallest cross section of the bolt; from the DIN 13-28 (ISO Metric Screw Threads; Coarse and

Fine Screw Threads from 1 to 250 mm)


N ote1 : In the case that the geometry standard is unknown then the programs assigns to Dkm value the average of several screw standards.
It is not so significant in the end result.

N ote2 : In the case of do not know the constact surfaces material the calculator will assign a friction coefficient of 0,1 ((μ) is 0,1)
Another function is to help to check the maintainability. If you introduce the screw standard and thread size you will have the link to the
recommended 3D models tools in order to check the required space to apply torque and to remove the screw. This will help to check that the
design is easy to mantain and prevent future redesign process during the assembly. You only have to insert the tool in your 3D model and you
will see that the bolt head clearance for the wrench, spanner or socket is enough.

Instructions

1) Enter thread diameter nominal value in section Thread Size. Click on info button for more info
2) In section Head Size and Type either select one fastener ISO with the "Select Standard for Type" option or enter manually the type and
whether the fastener is socket or not in the right part of the page, once you have selected Custom option.

3) Enter strength class of the fastener. Click on info button for more info

4) In section Coefficient of Friction either select one lubrication condition (faster and surface combination) with the "Select Friction condition"
option or enter manually or let the default value in the right part of the page, once you have selected Unknown option.
5) Click on button calculate, and the calculated torque will appear below.

Send us any suggestion you have

Your email

Send Comment

(http://store.curiousinventor.com/guides/Metal_Working/Screws)Share

You might also like