Scribd
Upload
40 views4 pages

AI Chiara RectangularChandelier74

The document provides assembly instructions for installing a Chiara rectangular chandelier that is 74 inches long. It includes a parts list and diagrams labelling each part. The instructions describe in 16 steps how to install the chandelier, including connecting the wires and hanging the glass drops.

Uploaded by

VALENTINA TRIVIÑO CARDENAS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
40 views4 pages

AI Chiara RectangularChandelier74

The document provides assembly instructions for installing a Chiara rectangular chandelier that is 74 inches long. It includes a parts list and diagrams labelling each part. The instructions describe in 16 steps how to install the chandelier, including connecting the wires and hanging the glass drops.

Uploaded by

VALENTINA TRIVIÑO CARDENAS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

CHIARA RECTANGULAR CHANDELIER 74"

ASSEMBLY & INSTALLATION INSTALLATIONS


UNITED STATES ENGLISH
CHIARA RECTANGULAR CHANDELIER 74" UNITED STATES ENGLISH

CHIARA RECTANGLAR CHANDELIER 74"

PARTS INCLUDED:

(A) Junction Box, 50 lb./22.7 kg MIN. FIXTURE RATED (not included)


(B) Mounting Screws (4 Pcs; not included)
(C) Wire Nuts (3) K
(C1) Ceiling Plate (1)
(C2) Canopy (1)
(C3) Bolts (4 +1 extra)
A
(D1) Quick Links (2)
C
(D2) Hanging loop (4) C1
(E1) Extension Rods (4)
(E2) Extension Rods (4) I2 B
(E3) Extension Rods (8) I1 K C2
(F) Fixture Body (1)
(G1) Glass drops +Spare (234 + 8 extra) C3
(G2) Glass drops +Spare (156 + 4 extra) D1
(H) Bulbs (28+10 extra)
(I1) Small Allen Key (1)
D2
(I2) Large Allen Key (1) E1
(J) Set Bolts (47 + 7 extra)
(K) Safety Cables (1)
(M) Threaded Joints (10)
M

PRODUCT DESCRIPTION
E2
General material: Glass and iron
Height: 12.75 in (32.5 cm) I1
Length: 74.0 in (187.9 cm)
Width: 31.75 in (80.6 cm) J
Weight: 348.06 lb (157.88 kg)
Grounded/hardwired

E3

F
G2
H

G1

REVISION 02-14-22
RH.COM
CHIARA RECTANGULAR CHANDELIER 74" UNITED STATES ENGLISH

IMPROTANT: PLEASE READ WARNINGS

PLEASE FOLLOW THE ASSEMBLY INSTRUCTIONS CLOSELY. All wires are connected. When unpacking, be careful not to pull wires,
IMPROPER ASSEMBLY OR INSTALLATION CAN RESULT IN as damage may result. Do not connect electricity until the fixture is
PERSONAL OR PROPERTY DAMAGE. MOUNTING HARDWARE fully assembled. To reduce the risk of fire, electrical shock, or personal
HAS BEEN PROVIDED FOR MOUNTING TO A WOODEN injury, always turn off fixture and allow it to cool prior to replacing
STRUCTURAL BEAM. UNIQUE OR ALTERNATIVE INSTALLATION the lightbulb. Do not touch or look directly at the bulb when fixture is
IMPO RT ANT: PLEASE REA D
TYPES MAY REQUIRE DIFFERENT MOUNTING HARDWARE, illuminated. Keep flammable materials away from lit bulb.
WHICH HAS NOT BEEN INCLUDED. ALWAYS CONSULT WITH A
LICENSED ELECTRICIAN BEFORE INSTALLATION.
INSTALLATION BY A LICENSED ELECTRICIAN IS STRONGLY WARNING: STRANGULATION HAZARD
RECOMMENDED.

Keep cord at least 3 feet away from cribs, bassinets, and toddler beds.
IMPORTANT SAFETY FEATURES Keep out of reach of children under 3 years of age.

BULBS
THIS PRODUCT IS NOT A TOY AND HAS NO PLAY VALUE.
This fixture has been rated for up to twenty-eight (28) 25-watt max- INSTALL SAFETY CABLE:
imum E12 bulbs. To avoid the risk of fire, do not exceed the recom-
mended wattage.
1. Remove the nut locker A & B by loosening the set screw from
the ceiling safety cable before installation.
VAULTED CEILING COMPATIBILITY 2. Insert the ceiling safety cable through the nut lockers as the
drawing shows.
3. Fasten the nut locker A with set screw by small allen key.
This fixture is not vaulted-ceiling compatible. 4. Fasten the nut locker B with set screw by small allen key.

DIMMER SWITCH COMPATIBILITY

This fixture is dimmer-switch compatible, and may only be used with


a dimmer switch.

CEILING REINFORCEMENT

Fixtures weighing 50 lb. or more will require additional reinforcement


above the ceiling where they are to be installed.
Nut locker A
Nut locker B
Set screw

Ceiling safety

REVISION 02-14-22
RH.COM
CHIARA RECTANGULAR CHANDELIER 74" UNITED STATES ENGLISH

ASSEMBLY AND INSTALLATION


ATTENTION: ADJUSTING THE HANG HEIGHT
SHUT OFF THE MA I N E LE CT RI CA L S U P P LY F RO M Any adjustments or alterations to the fixture, cord, or overall
THE FU SE BOX O R C I RC U I T BRE A K E R PA N E L. hang height that differ from those detailed on RH.com will void
the Laboratory Listing and Approvals (UL, ETL, CSA, etc.). If
the listing is voided, this means the product may no longer be
1. Carefully remove all parts from the box and remove all plastic safe for use as modified. RH does not recommend modifying
coverings. the product.
2. Turn OFF power to junction box where the ceiling light will be
installed. CARE INSTRUCTIONS
3. Loosen the bolts (C3) from the canopy (C2)and remove the ceiling
Do not use polishes or cleaners on the fixture. Wipe clean with
plate (C1) from the canopy (C2).
a soft, dry cloth.
4. Attach ceiling plate (C1) to the ceiling with mounting screws (B).
5. Attach the extension rod (from E3 to E1) into the fixture body (F),
then tighen the set bolt (J) by small allen key (I1).
6. Attach the extensions rod (E1) to the collar of the ceiling plate (C1)
with quick link (D1).
7. Have a professional contractor reinforce ceiling. Attach the safety
cable (K) to ceiling beam through the junction box (A), then attach
the safety cable to the fixture on the ceiling with the nut locker.

8. Carefully inspect the chandelier’s two fixture wires. One has very
fine ridges molded into the plastic covering – this is the neutral
wire. The second wire’s covering is smooth – this is the hot wire.
The bare wire is the ground wire.
9. Connect the ground wire from the fixture with the ground wire
(usually bare) from your ceiling box using a wire nut. If your house-
does not have a ground wire, then attach the ground wire from
the fixture to the green grounding screw inside of the outlet box.
IT IS IMPERATIVE THAT THE OUTLET BOX IN YOUR HOME BE
PROPERLY GROUNDED
10. Connect the neutral wire from your fixture with the neutral wire
(usually white) from your ceiling box using a wire nut (C).
11. Connect the hot wire from your fixture with the hot wire (usual-
lyblack) from your outlet box using a wire nut (C). DO NOT RE-
VERSE THE HOT AND NEUTRAL CONNECTIONS; OTHERWISE,
SAFETYWILL BE COMPROMISED
12. Move the canopy (C2) up to the ceiling plate (C1), then fasten the
screw bolt (C3).
13. Fasten lightbulbs (H) to the lampholders.
14. Hang the glass drops (G1 & G2) from the inner to the outer layer
and keep flat surface of glass drop inside. To ensure safety of
chandelier during glass drop installation, please maintain level of
chandelier by ensuring you install glass drops in balanced way on
opposite ends of light.
15. Restore power to the junction box and test ceiling light fixture.
16. Assembly is complete.

REVISION 02-14-22
RH.COM

You might also like