Jet Bus SHD: Ready To Print
Jet Bus SHD: Ready To Print
Jet Bus SHD: Ready To Print
Wide : 130 mm
High : 180 mm
Long : 588 mm
Plans and pa erns in this Package For personal use only, the content owner gives non-exclusive buyer permission
to view, download and copy content. buyers must comply with the content owner rules. The content owner has
exclusive rights to the content that is owned in the present and in the future.
1. Use of content for commercial purposes is prohibited, content cannot be resold, re-licensed or sub-licensed,
leased and mass produced.
2. Distribu ng or sharing content for any reason is prohibited. Sharing of content is only permi ed via the official
website link of the content owner h ps://kayunganjuk.com
3. The reuse of content in the form of photo or video files is permi ed by giving credit to the content owner at
h ps://kayunganjuk.com
Notes to Readers:
Due to individual condi ons, tools and skills, we are not responsible for any damage, injury suffered, or loss that
occurs as a result of following the informa on published in this set of plans. Before star ng any instruc ons
carefully review the project. If you have any doubts or ques ons, please con nue to consult with local experts or
authori es.
CONTENT
Cover ....................................................................... 1
Front View
Rear View
Top View
Bo om View
Rigth View
Le View
23
24
15
7d
14
7 9
7a 12 11
7a 36
13
9 9
17 30
10b 7c 7b 7b
7c 33
25 25 26 32
35 34 10a 16
31
29
6
25 25 26 5a
5d
5b
27 28
28 5c
20 3b 3b
19 27 26 25 25
4a
3a 2b
18 4b
3a 2b 28
8d
8 4c
8c 26 25 25
8b
2b
8a
2b 39
22
22 1
2a
38 37
40
21
21 38
39
IMPORTANT NOTE
1. Before cu ng the material, cover the surface with masking tape or vinyl s ckers, this is to make it easier to s ck
or remove the cut pa ern on the material without leaving glue marks on the material.
2. Make sure the thickness of the material is in accordance with the instruc ons on the cu ng pa ern that we set,
this will greatly affect the construc on and other parts during assembly.
3. Assemble each part using wood glue or PVA glue on the wide part, use a clamp for maximum results, use super
glue or all-purpose liquid glue in small parts.
ALTERNATE DOWELS
In general, we use 5mm diameter food chops cks as a dowel on the wheel and a 3mm diameter toothpick as the
steering wheel.
2a
Step 1 Step 2
Combine parts 1, 2a and 2b into one sec ons, use super glue / ombine parts 3a and 3b into one sec ons, use super glue / CA
CA glue (see picture) glue (see picture)
4a
4b
4c
Step 3 Step 4
Combine parts 4a, 4b and 4c into one sec ons, use wood glue / Combine into one sec ons, use wood glue / PVA glue (see
PVA glue (see picture) picture)
5a
5d
5b
5c
Step 5 Step 6
Combine parts 5a, 5b and 5c into one sec ons, use wood glue / Combine parts 5d into one sec ons, use wood glue / PVA glue
PVA glue (see picture) (see picture)
Step 7 Step 8
Combine parts into one sec ons, use wood glue / PVA glue (see Combine parts 6 into one sec ons, use super glue / CA glue (see
picture) picture)
7a
7a
Step 9 Step 10
Combine parts 7 and 7a into one sec ons, use super glue / CA Combine parts into one sec ons, use wood glue / PVA glue (see
glue (see picture) picture)
7c
7b
7b
7c
Step 11 Step 12
Combine parts 7b and 7c into one sec ons, use super glue / CA Combine parts into one sec ons, use super glue / CA glue (see
glue (see picture) picture)
7d
8c
8b
8a
Step 13 Step 14
Combine parts 7d into one sec ons, use super glue / CA glue Combine parts 8a, 8b, 8c and 8d into one sec ons, use super
(see picture) glue / liquid glue (see picture)
Step 15 Step 16
Combine parts 8 into one sec ons, use super glue / CA glue (see Combine parts into one sec ons, use super glue / CA glue (see
picture) picture)
10b
9
9 9
10a
Step 17 Step 18
Combine parts 9 into one sec ons, use super glue / CA glue (see Combine parts 10a and 10b into one sec ons, use super glue /
picture) CA glue (see picture)
12
11
Step 19 Step 20
Combine parts 11 into one sec ons, use wood glue / PVA glue Combine parts 12 into one sec ons, use super glue / CA glue
(see picture) (see picture)
14
15
13
Step 21 Step 22
Combine parts 13 and 14 into one sec ons, use super glue / CA Combine parts 15 into one sec ons, use super glue / CA glue
glue (see picture) (see picture)
16
Step 23 Step 24
Combine parts into one sec ons, use super glue / CA glue (see Set parts 16, use ribbon cloth as hinges and CA glue to
picture) connected (see picture)
17
16
17
Step 25 Step 26
Set parts 17, use ribbon cloth as hinges and CA glue to Combine set parts 16 and 17 into one sec ons, use super glue /
connected (see picture) CA glue (see picture)
22 22
20
19
21
18
21
Step 27 Step 28
Combine set parts 18 and part 19, 20 into one sec ons, use Combine parts 21 and 22 into one sec ons, use super glue / CA
super glue / CA glue (see picture) glue (see picture)
23
Step 29 Step 30
Combine parts into one sec ons, use super glue / CA glue (see Combine parts 23 into one sec ons, use wood glue / PVA glue
picture) (see picture)
27
26
25 25
27
26
25
25
24
Step 31 Step 32
Combine parts 24 into one sec ons, use wood glue / PVA glue Combine parts 25, 26 and 27 into one sec ons, use super glue /
(see picture) CA glue (see picture)
Step 33 Step 34
Insert parts into one sec ons (see picture) Combine parts into one sec ons, use super glue / CA glue (see
picture)
31 32 30
28
28
28
29
Step 35 Step 36
Combine parts 28 into one sec ons, use super glue / CA glue Combine parts 29, 30, 31 and 32 into one sec ons, use super
(see picture) glue / CA glue (see picture)
33
34
35
36
Step 37 Step 38
Combine parts 33, 34 and 35 into one sec ons, use super glue / Combine set parts 36 into one sec ons, use wood glue / PVA
CA glue (see picture) glue (see picture)
38
38
37
Step 39 Step 40
Insert parts into one sec ons (see picture) Combine parts 37 and 38 into one sec ons, use super glue / CA
glue (see picture)
39
39
40
Step 41 Step 42
Combine parts 39 into one sec ons, use super glue / CA glue Combine set parts 40 into one sec ons, use wood glue / PVA
(see picture) glue (see picture)
Step 43 Finish
Insert parts into one sec ons, (see picture)
IMPORTANT NOTE
1. Print the cut pa erns that we have set, make sure the print size of the printer is accurate, print as original
documents and do not use a scale, measure the print on each cut pa ern with a ruler, if the size does not match
then adjust the printer se ngs.
2. Use paper glue and paste print cut pa erns on the material according to the thickness we have set, cut follow
the black outline and remove the white area.
2b 2b
2a
material thick 8mm material thick 8mm
material thick 5mm
8d
material thick 5mm
2b 2b
8b
8
material thick
20mm
8a
8c
dowel dia 3mm
3a 3b
3a 3b
4a
5d
5c
material thick 3mm
material thick 15mm 5b
material thick 15mm 5a
material thick 15mm
7a 7
material thick 3mm material thick 20mm
7b
material thick 20mm
material thick 20mm material thick 20mm material thick 20mm material thick 20mm
7b 7b 7b 7b
7b 7b 7b 7b
material thick 20mm material thick 20mm material thick 20mm material thick 20mm
material thick 20mm material thick 20mm material thick 20mm material thick 20mm
7b 7b 7b 7b
7b 7b 7b 7b
material thick 20mm material thick 20mm material thick 20mm material thick 20mm
material thick 21mm
7d
9 9 9
material thick 3mm material thick 3mm material thick 3mm
7c
material thick 20mm
material thick 20mm material thick 20mm material thick 20mm material thick 20mm
7c 7c 7c 7c
7c 7c 7c 7c
material thick 20mm material thick 20mm material thick 20mm material thick 20mm
material thick 20mm material thick 20mm material thick 20mm material thick 20mm
7c 7c 7c 7c
7c 7c 7c 7c
material thick 20mm material thick 20mm material thick 20mm material thick 20mm
6
material thick 3mm
6
material thick 3mm
6
material thick 3mm
6
material thick 3mm
10a
material thick 3mm
10a
material thick 3mm
10a
material thick 3mm
10a
material thick 3mm
10b
material thick 3mm
10b
material thick 3mm
10b
material thick 3mm
10b
material thick 3mm
16
set part
material thick 5mm
16
set part
material thick 5mm
16
set part
material thick 5mm
16
set part
material thick 5mm
16
set part
material thick 5mm
17
set part
material thick 5mm
16
set part
material thick 5mm
16
set part
material thick 5mm
16
set part
material thick 5mm
17
set part
material thick 5mm
12
material thick 3mm
12
material thick 3mm
23
material thick 5mm
22 22
21 21
20
material thick 3mm
19
material thick 3mm
18 set part
18 set part
11
material thick 3mm
24
material thick 5mm
33
29
material thick 3mm
material thick 3mm
31
material thick 3mm
30
material thick 3mm
32
material thick 3mm
34
35
material thick 3mm
material thick 3mm
39
material thick 3mm
37 38
material thick 3mm material thick 3mm
26 26
26 26
38
material thick 3mm
39
material thick 3mm
36
set part
material thick 5mm
36
set part
material thick 5mm
material thick 5mm
set part
40
25 25
25 25
We are basically ordinary human beings, have the wrong nature and forget.
If you find any errors in this plan set, Please forgive and remind us.
Your cri cisms and sugges ons mean a lot to us, so that we can develop and get be er in the future.
Posi ve benefits to the world community.
Contact us
Email : [email protected]
Website : kayunganjuk.com
Pinterest : id.pinterest.com/kayunganjuk
Instagram : instagram.com/kayunganjuk
Facebook : facebook.com/fbkayunganjuk
Youtube : youtube.com/c/kayunganjuk