Probe software for machine tools:

programs and features

Apple and the Apple logo are trademarks of Apple Inc., registered in
the U.S. and other countries. App Store is a service mark of Apple Inc.,
registered in the U.S. and other countries.
Google Play and the Google Play logo are trademarks of Google LLC.
Other brand, product or company names are trade marks of their
respective owners.

ii Probe software for machine tools – programs and features

Contents

Probe software for machining centres.............................................................................................................. 1.1

Inspection Plus software for machining centres........................................................................................................................... 1.1

Contact tool setting software for machining centres..................................................................................................................... 1.5

Non-contact tool setting software for machining centres.............................................................................................................. 1.7

Probe software for multi-axis lathes and multi‑tasking machines........................................... 2.1

Inspection software for multi-axis lathes and multi‑tasking machines.......................................................................................... 2.1

Contact tool setting software for multi-axis lathes and multi‑tasking machines............................................................................ 2.4

Non-contact tool setting software for multi-axis lathes and multi‑tasking machines..................................................................... 2.6

Probe software for lathes ............................................................................................................................................ 3.1

Inspection software for lathes....................................................................................................................................................... 3.1

Tool setting software for lathes..................................................................................................................................................... 3.3

Productivity+™ Scanning Suite.............................................................................................................................. 4.1

Productivity+™ Active Editor Pro.................................................................................................................................................. 4.1

Productivity+™ CNC plug-in......................................................................................................................................................... 4.1

SupaScan.................................................................................................................................................................................... 5.1
AxiSet™ Check-Up software for machine tools ...................................................................................... 6.1
Inspection and tool setting GUIs .......................................................................................................................... 7.1
GoProbe GUIs.............................................................................................................................................................................. 7.1

Set and Inspect............................................................................................................................................................................. 7.2

Reporter....................................................................................................................................................................................... 7.4

Smartphone apps for machine tool products ............................................................................................ 8.1

GoProbe app................................................................................................................................................................................ 8.1

NC4 app....................................................................................................................................................................................... 8.2

Trigger Logic™ app...................................................................................................................................................................... 8.2

HP arms app................................................................................................................................................................................ 8.2

Legacy software.................................................................................................................................................................... 9.1

www.renishaw.com iii
Software features
Illustrations in this publication demonstrate typical applications
and features. They are not a complete specification for all
software packages. Refer to the programming manual supplied
with each software package for a complete specification of the
software package.

The software packages listed in this document require minimal

installation support. If you cannot find the package for your
machine and controller combination, contact your local
Renishaw office.

iv Probe software for machine tools – programs and features

Probe software for machining centres
Inspection Plus software for machining centres
Inspection Plus is a comprehensive macro software package for Renishaw machine tool probes. A wide range of cycles are
supported from basic part set-up through to more complex vector and angular measurement cycles.

Inspection Plus packages incorporate optional SupaTouch optimisation – calibrating a machine tool, controller and Renishaw probe
as a complete system, resulting in improved metrology and reduced cycle times.

Experienced users can create and execute cycles using traditional G-code techniques. New or less experienced users can choose
from a range of graphical user interfaces (GUIs), including Set and Inspect (see page 7.2 for more details) or GoProbe, which offers
a simplified programming method supported with a self-study training kit and smartphone app (see page 8.1 for more details).

On completion of each cycle, the measured results can be printed via the RS232 port. Alternatively, Reporter can be used to view
component measurement data on the machine tool or export this measurement data for further analysis.

A complementary Inspection Plus for OSP60 software package also exists. This package, used in conjuction with Productivity+™
CNC plug-in or SupaScan, allows users to run existing Inspection Plus touch probe measurement routines using the OSP60
on‑machine scanning probe.

Cycle title and description GoProbe Cycle title and description GoProbe
option option
XYZ surface measure  5-point rectangle 
Used to measure a (external) measure
surface to establish size Used to establish the
or position. centre of a rectangle
and its orientation.
A true centre can
be found even if the
feature is not square to
the machine axes.

Web/pocket measure  5-point rectangle 

Used to measure a web (internal) measure
or pocket feature using Used to establish the
two measuring moves centre of a rectangle
along the XY axis. and its orientation.
A true centre can
be found even if the
feature is not square to
the machine axes.

Bore/boss measure  Angled surface

Used to measure a bore measure using XYZ
or boss feature using inputs
four measuring moves Used to measure a
along the XY axis. surface feature using
a 2D vectored move in
either XY, XZ, YZ, or
a 3D vectored move
in XYZ.

continued ...

Probe software for machining centres 1.1

 Cycle title and description GoProbe Cycle title and description GoProbe
option option
Internal corner measure  Angled web/pocket
Used to establish the measure
corner position of a Used to measure a web
feature. A true corner or pocket feature using
intersection can be found two vectored measuring
when the corner is not moves along the XY axis.
90°.

External corner measure  Stock allowance

Used to establish the Used to measure an X,
corner position of a Y or Z surface at defined
feature. A true corner positions to establish the
intersection can be found maximum and minimum
when the corner is not stock condition of the
90°. surface.

3-point bore or boss  Multi-stylus calibration

measure Several stylus ball
Used to measure a bore configurations can be
or boss feature using calibrated and stored.
three vectored measuring
moves along the XY axis.

4th-axis measure  Feature-to-feature

Used to find the angle measure
of a surface between A no movement cycle
two points. The 4th axis that is used after two
can then be rotated measuring cycles to
to compensate for the determine feature-to-
surface error. feature data.

Bore/boss on a PCD Angled XY surface

measure (angle find) measure
Used to establish the pitch Used to measure an
circle diameter between a X-axis or Y-axis surface at
series of bores or bosses. two positions to establish
the angular position of
the surface.

Statistical process Protected position

control (SPC) cycle for move
tool offset updates Used to protect the probe
Can be used in against damage. It can
conjunction with also be used to detect
measuring cycles to misloaded components.
control the updating of
tool offsets. An update
is based on the average
value of a sample of
measurements.

Probe start Probe stop

Used to switch the probe Used to switch the probe
on and open a print port off and close a print port.
in readiness for printing
results in subsequent
measuring cycles.

1.2 Probe software for machining centres

Inspection Plus software for machining centres
Machine (Controller) Part number GoProbe Set and Inspect Reporter SupaTouch
app support 1
support 2 support optimisation

Brother (32A (A000) – post June 2002) A-4012-0908

Brother (32B (B00), 32C (C00), 32D (D00)) A-4012-1028 3  
Brother ‘L’ shaped stylus A-4012-2113
DMG MORI (Fanuc/Meldas) A-4012-0936 3  
Fagor (8060, 8065, 8070) A-4016-0071 3 
Fagor (8055) A-4016-0067 
Fanuc Macro B (0M, 10-15M, 15i M, 16-21M/i M, 30-32i M) A-4012-0516 3    
Fanuc Macro B ‘L’ shaped stylus (0M, 10-15M, 15 M,
16-21M/i M, 30-32i M) A-4012-1551
Haas A-4012-0880 3

Hitachi (Fanuc special) A-4012-0673 3

Hitachi Seicos (Σ10, Σ16, Σ18, MIII (M3), Lambda) A-4012-0749 3

Hurco (WinMax) A-4012-1126 3 

Makino (All variants) A-4012-1611 3  
Mazak (M32, M Plus and Fusion 640M) 4 A-4013-0023 3
Mazak HMC, VMC, Variaxis (Smooth, Matrix, Matrix Nexus, Smart) 4 A-4013-0112 3   
Mazak Versatech (Smooth, Matrix M) 4 A-4013-0232 3
Mazak VTC800 (Smooth, Matrix, Matrix Nexus) 4 A-4013-0205 3   
Mitsubishi Meldas (M3, M310, M320, M330, M335 series,
M50, M500 series M64, Magic 64, M60, M600, M70, M700, M80,
M800 series) A-4012-0516 3    
NUM (750, 760, 1020-1060) 5 A-4012-0712 3
Okuma (OSP E100, P100, P200, P300, U100) A-4016-1035  6 6 
Okuma MILLAC VH/MCR (OSP P200, P300) A-4016-1087
Siemens (802D, 808D) A-4014-0336
Siemens (810D, 828D, 840D, SINUMERIK ONE) 7 A-4014-0356 3   
Siemens ‘L’ shaped stylus (810D, 828D, 840D, SINUMERIK ONE) 7
A-4014-0695
Syntec A-4012-1239 3

TOSNUC (888, 999, PX100, PX200) A-4012-0949 3 

Yasnac (MX3, J50, I80, J100, J300) A-4014-0070 3

Quote part number when ordering.

Notes:
1
See page 8.1 for minimum macro software requirements.
2
See page 7.2 for minimum macro software requirements.
3
Print option available – function dependent on controller (not available with the GoProbe option).
4
EIA/ISO and Mazatrol compatible.
5
Currently metric mode only.
6
Set and Inspect and Reporter support Okuma OSP P300 controllers only.
7
The software is not supported on Siemens powerline controllers below version 5.0. Contact Renishaw support for earlier
versions.

Probe software for machining centres 1.3

Advanced cycles “add-on” package for Inspection Plus
Advanced cycles enhance the existing Inspection Plus package to offer probing cycles that are aimed at more experienced users,
specialised applications or where a bespoke probing cycle is required. The advanced cycles offer improved metrology, flexibility, and speed.

NOTE: These cycles are to be used alongside the host Inspection Plus software package. The GoProbe option is not available for
advanced cycles.

Probing cycle, benefit, and description

Levelling cycle

Benefit:
For efficient 5-axis machining the part needs to be level in all
axes. This cycle simplifies the process of part levelling on a 5-axis
machine, resulting in reduced set-up time, improved cutting
accuracy and less scrap.
Description:
Used to align the top face of a component perpendicular to the
spindle axis.
Designed for a 5-axis machine, table/table construction and
utilises the Fanuc software function G68.2 P2 or CYCLE800
Additive Projection Angle for Siemens.
The probe measures three positions in Z and automatically levels
the component. It is possible to update the selected work offset
with the rotary axis positions.
NOTE: G68.2 is a Fanuc option, CYCLE800 is standard on Siemens controllers.

Probe orientation cycle

Benefit:
Designed for simplified work piece set-up.
The spindle orientates the probe so that each measurement touch
uses the same trigger point on the stylus, therefore if the probe is
only used for setting XY work offsets, there is no need to calibrate
the probe in XY.
Description:
Sets a WCS to the centre of a bore/boss, web/pocket.
NOTE: Programmable spindle orientation is a Fanuc option; it is standard on Siemens
controllers (SPOS).

Multi-point circle-arc cycle

Benefit:
Measures the form (circularity) of a bore or boss.
The cycle can also measure a partial arc, returning size and
position. The probe does not return to the feature centre between
moves, reducing cycle time and useful on large arc measurement,
where axis travel is limited.
Description:
Measures a circle/arc using a minimum of 3 and a maximum of 16
vectoring measuring moves.

1.4 Probe software for machining centres

Probing cycle, benefit, and description
Construction cycles
Benefit:
These cycles can be used in applications where the tradition
“canned” cycles are too rigid. They are designed for users who want
to build their own measurement routines, control the path between
measuring points and the order in which measured points are
taken. With this level of flexibility, cycle time can be reduced to the
absolute minimum.
Description:
The user moves the probe adjacent to the surface, measures a
point, measured values are stacked for later calculation, the above
process is repeated until all points are captured.
Once all measured results are stacked, features can be constructed
using the measured points. Size and positional information can
then calculated and used to update WCS or tool offsets.

Examples:
Two-point construction cycle
Used for traditional XY web/ pocket or angled web/pocket
applications. Finds the centre, distance and angle between two
points – P1 and P2.
Two-line intersection cycle
Finds an intersection point from four points in the XY plane (two
points on each line).
Construction circle
Fits a circle (or arc) to a set of points which do not have to be
equi-spaced.

Advanced cycles software

Machine (Controller) Part number Minimum version of Inspection
Plus required

Fanuc Macro B/Mitsubishi Meldas A-4012-2106 A-4012-0516-0M

Mazak (Smooth/Matrix) A-4013-2003

Siemens A-4014-0823 A-4014-0356-0H

ACS-1 software for machining centres

Machine (Controller) Part number Minimum version of Inspection
Plus required

Brother (32B (B00), 32C (C00), 32D (D00)) A-4012-2136 A-4012-1028

Fanuc Macro B/Mitsubishi Meldas A-4012-2125 A-4012-0516-AB

DMG MORI (Fanuc) A-4012-2143 A-4012-0936-0X

A-4012-0880 0D or
Haas A-4012-2141 Haas factory fitted Renishaw/WIPS
Inspection Plus software

Heidenhain (i530, 620/640) A-4014-0839 N/A

Makino A-4012-2125 A-4012-1611-0F

A-4013-0106-AH
Mazak Integrex, Vortex (Smooth, Matrix) A-4013-0604
A-4013-0404-0B

Mazak (Smooth/Matrix) A-4013-0602 A-4013-0112-0T

Okuma A-4016-1135 A-4016-1035-0W

Siemens A-4014-0837 A-4014-0356-0P

ACS-1 macro s/w kit bundle – includes all of the above kits (except Heidenhain) A-6794-8991 See individual kits

Probe software for machining centres 1.5

Contact tool setting software for machining centres
Renishaw’s contact tool setting software for machining centres can be easily set up to suit a machine tool’s configuration. The
software is suited to the majority of applications, especially when used with Renishaw’s industry-standard TS27R, RTS and OTS
probes.

Experienced users can create and execute cycles using traditional G-code techniques. Renishaw’s range of user-friendly GUIs
(including Set and Inspect) supports new and less experienced users (see page 7.1 for details).

The contact tool setting software also contains a GoProbe option to offer a choice between the traditional programming method and
the GoProbe programming method.

Cycle title and description GoProbe Cycle title and description GoProbe
option option
Manual measurement  Automatic 
Used to measure the measurement
length, or length and This cycle takes a
radius, of a tool. measurement on the tool
The tool should be setting stylus to measure
manually positioned the effective cutting
10 mm from the stylus length of either a rotating
before running the cycle, or a non-rotating tool.
and there should be no The tool must be called
tool offset active. into the spindle, then the
cycle will automatically
move the tool to the
clearance position.
Broken tool detection  Thermal compensation 
Used to check the length Used to check thermal
of a rotating tool for a drift on the machine, this
broken tool condition. cycle has two functions:
The cycle also checks for
a ‘long tool’ condition in 1. To set base data.
case the tool has pulled This measures the
out during machining. X, Y and Z faces
of the stylus and
saves the positions
in variables. The
locations are set on
the input line.

2. To measure and
compare. This
measures the X, Y
and Z faces of the
stylus and compares
the results to the
base data, revealing
any thermal drift. The
differences in X, Y
and Z will be output
into variables. If they
are out of tolerance,
an alarm will be
raised.

1.6 Probe software for machining centres

Contact tool setting software for machining centres
Machine (Controller) Part number GoProbe app Set and Inspect Reporter
support 1 support 2 support

Brother (32A (A00) – post June 2002, 32B (B00), 32C (C00), 32D (D00)) A-4012-1007 3 
DMG MORI (Fanuc/Meldas) A-4012-1555 3 
Fadal (32MP, CNC88, CNC88HS) A-4016-0043 3

Fagor (8060, 8065, 8070) A-4016-0078 3

Fanuc Macro A (0M MATE, 0MA, 0MB, 0MC) A-4012-0645 3

Fanuc Macro B (0M, 6M, 16-21M/i M, 10-15M, 15i M, 30-32i M) A-4012-0584 3   

Haas A-4012-0886 3

Heidenhain (iTNC 530 v 340 494-04 onwards) A-4014-0711 3

Hitachi Seicos A-4012-0817 3

Hurco (WinMax) A-4012-1145 3

Makino (All variants) A-4012-1580 3 

Mazak (M32, M Plus, Fusion 640M) 4
A-4013-0036 3

Mazak (Smooth, Matrix, Matrix Nexus, Smart) 4 A-4013-0133 3   

Mazak (CV5-500) A-4013-0429

Mitsubishi Meldas (M3, M310, M320, M335, M500, M600, M700, M800 series) A-4012-0584 3   
NUM (750, 760, 1020, 1060) A-4012-0665 3

Okuma (OSP E100, P100, P200, P300, U100) A-4016-1039 3  

Selca (3000/4000 series) A-4014-0094 3

Siemens (810, 820, 840, 850, 880) A-4014-0064 3
Siemens (840C) A-4014-0064 3
Siemens (802D, 808D) A-4014-0310 3
Siemens (810D, 828D, 840D, SINUMERIK ONE) 5 A-4014-0396 3 
Yasnac (Yasnac MX3, J50, I80, J100, J300 (Matsuura M80)) A-4014-0018

Quote part number when ordering.

Notes:
1
See page 8.1 for minimum macro software requirements.
2
See page 7.2 for minimum macro software requirements.
3
Includes rotating tool setting.
4
EIA/ISO and Mazatrol compatible.
5
The software is not supported on Siemens powerline controllers below version 5.0. Contact Renishaw support for earlier
versions.

Length tool setting (LTS) software for machining centres

Machine (Controller) Part number

Brother, Fanuc, Haas, Hurco, Mazak, Mitsubishi Meldas, Siemens, Syntec A-5475-8700

Probe software for machining centres 1.7

Non-contact tool setting software for machining centres
The non-contact tool setter (NCTS) is designed to help machine tool operators to set tools and return high-speed/high-precision
measurement of cutting tools, and is preferred for applications where delicate tools are used and/or where a tool setter must not
obstruct a machine’s working envelope.

Experienced users can create and execute cycles using traditional G-code techniques. Renishaw’s range of user-friendly GUIs
(including Set and Inspect) and the GoProbe smartphone app support new and less experienced users (see page 7.2 and page
8.1 for details).

Two measurement methods are available with the non-contact tool setting system: Tool Set Mode 1 (TSM1), where the tool is
measured as it enters the beam (light-to-dark transition), and Tool Set Mode 2 (TSM2), where the tool is measured as it enters and
exits the beam (dark-to-light transition). All packages support TSM1; newer packages support both TSM1 and TSM2.

Where both modes are supported, the decision to use TSM1 or TSM2 is typically based on M-code availability and measurement
conditions (for example, in wet conditions, TSM2 is recommended).

Cycle title and description Cycle title and description

Tool length setting Tool radius and diameter setting
Used to measure the effective Used to measure the effective
length of a cutting tool, this cycle radius or diameter of a tool,
is suitable for on-centre setting of this cycle allows the radius and
tools such as drills and ball-end diameter to be measured from
mills, and for off-centre setting of the positive side of the beam, the
tools such as face mills and end negative side of the beam, or both
mills. sides of the beam.

Tool length and radius setting Broken tool detection – plunge

Used to measure the effective checking
length and radius/diameter of Used to check for broken cutting
a tool, this cycle is particularly tools, this cycle uses a plunge
suitable for tools such as face check to move the tool in and
mills, end mills, slot cutters, disk out of the laser beam in the axis
mill cutters, dovetail cutters and used for length setting. The cycle
boring tools. can also check for a ‘long tool’
condition in case the tool has
pulled out during machining.

Cutting edge checking Broken tool detection for solid

Used to check for missing or tools
damaged edges, or the distance This cycle differs from the ‘Broken
between minimum and maximum tool detection – plunge checking’
edges. The Latch mode feature on cycle, in that it uses the Tool Break
the NCi-6 must be enabled. mode feature on the NCi-6. The
cycle is used for drills and taps,
and reamers and is particularly
suited to wet conditions.

1.8 Probe software for machining centres

Cycle title and description Cycle title and description
Cutter radius and linear profile Cutter radius measurement
checking This cycle measures the effective
Used to verify the specified form ball nose or corner radius of a tool
of a profiled cutting tool, this cycle whilst it is rotating. *
is particularly suitable for ball
nose cutters, cutters with a corner
radius, and cutters with linear
profiles. The Latch mode feature
on the NCi-6 must be enabled. *

Temperature compensation * The availability of this cycle is package-dependent.

tracking
Used to calibrate the NCTS
system, this cycle should be run on
a regular basis during machining
operations to compensate for
growth in the spindle axis and/
or radial measuring axis caused
by temperature changes in the
machine tool. *

Probe software for machining centres 1.9

Non-contact tool setting software for machining centres
Machine (Controller) Part number GoProbe app Set and Inspect Reporter TSM2
support 1 support 2 support support

Brother (32A (A00) – post June 2002) A-4012-0904

Brother (32B (B00), 32C (C00), 32D (D00)) A-4012-1035  
DMG MORI (Fanuc/Meldas) A-4012-0953  
Fagor (8060, 8065, 8070) A-4016-0090 
Fanuc Macro B (0M, 6M, 16-21M/i M, 10-15M, 15i M, 30-32i M) 4 A-4012-0820    
Haas A-4012-0895
Heidenhain (426, 430) A-4014-0165
Heidenhain (i530, i530 HSCI) A-4014-0253
Heidenhain (620/640 and i530 version 340 494-04 onwards) A-4014-0672 
Heidenhain (i530 version 340 494-04 onwards) 5 A-4014-0691
Heidenhain (TNC7) A-4014-0841
Hitachi Seicos (Σ16, Σ18M) A-4012-0848

Hurco (WinMax) A-4012-1141

Makino (All variants) A-4012-1615  

Mazak (M32, M Plus, Fusion 640M) 6 A-4013-0062

Mazak angled beam (Fusion 640M) 6 A-4013-0088

Mazak VMCs, HMCs, Variaxis, VTC800 (Smooth, Matrix, Matrix Nexus,
Smart) 4 6
A-4013-0119    
Mazak Versatech (Smooth, Matrix) 6 A-4013-0225
Mitsubishi Meldas (M3, M310, M320, M335, M500, M600, M700 series) A-4012-0820   
Okuma (OSP E100M, P100M, 200M, P300M, U100M) 4 A-4016-1051   
Siemens (802D, 808D) A-4014-0344
Siemens (810D, 828D, 840D, SINUMERIK ONE) 4 7 A-4014-0401   
Siemens (840D powerline with HMI) 3 7 A-4014-0384
Siemens (840D powerline and ShopMill with HMI) 3 7 A-4014-0585
Siemens (828D, 840D sl, SINUMERIK ONE, with HMI) 3 7 A-4014-0601  
Yasnac (MX3, J50) A-4014-0020

Yasnac angled beam (MX3, J50, I80, J100, J300) A-4014-0025

Quote part number when ordering.

Notes:
1
See page 8.1 for minimum macro software requirements.
2
See page 7.2 for minimum macro software requirements.
3
With GUI.
4
Includes angled beam option.
5
Includes angled beam/wet pack option.
6
EIA/ISO and Mazatrol compatible.
7
The software is not supported on Siemens powerline controllers below version 5.0. Contact Renishaw support for earlier
versions.

1.10 Probe software for machining centres

Advanced cycles “add-on” package for non-contact tool setting
software
These cycles are to be used in alongside the host NCTS software package. They provide additional functionality and are typically
used in advanced applications.

Cycle title and description

Tool length and radius measurement with run-out control

Benefit:
Monitoring and controlling tool run-out will prolong tool life, reduce tool
breakages, and likely improve surface finish.
Description:
After tool radius/diameter measurement, the tool ceases rotation and using
spindle orientation, the tool is measured at several angles. The run-out value is
calculated, which can be compared against a tolerance.
NOTE: This cycle requires the machine to orientate the spindle to different angles. Programmable spindle
orientation is not a standard function on all CNCs and its availability should be checked.

Tool length setting to an intersection

Benefit:
Accurate length setting to an intersection allows customers to closely control
drilling, chamfer, and countersink depths.
Description:
Used to set the tool length to an intersection. The tool end is established, and
subsequent points are measured by approaching tangential to the tool edge.
The measured points are used to calculate an intersection and the tool length
is updated based on the result.
The cycle supports three common tool profiles:
• External intersection
• Internal intersection
• Projected intersection
For more complex shapes, a combination of the point collector and
construction cycles can be used.
Point collector and construction

Benefit:
These cycles can be used in applications where the traditional “canned”
cycles are too rigid. They are designed for users who want to build their own
measurement routines, control the path between measuring points and the
order in which measured points are taken. With this level of flexibility, cycle time
can be reduced to the absolute minimum.
Point collector description:
Used to measure points on the surface of a tool at chosen angles and store the
measured Sp-axis and Ra-axis values in variables (data sets – DS).
The cycle is also used to establish an Sp-axis tool end beforehand.

Construction description, using two intersecting lines:

Used to find the intersection of two lines from the data sets collected using
the point collector cycle. The cycle can be used to set the tool length, the tool
radius/diameter or the tool length and radius/diameter.
This cycle contains no axis movements.
Construction description, using maximum, minimum or average values:
A construction cycle that is specifically for using the maximum, minimum or
average value from the data sets collected using the point collector cycle. The
cycle can be used to set the tool length or the tool radius/diameter.
This cycle contains no axis movements.

Probe software for machining centres 1.11

 Cycle title and description
Spindle orientation cycle TSM2

Benefit:
Knowing a tools orientation is important if undertaking Interpolation Turning or
other complex machining tasks.
Description:
This cycle establishes a tools orientation in relation to the spindle reference
position (SPOS=0). The tool is positioned, any spindle rotation ceases, and the
tool is orientated to the start position, where measurement commences.
At the end of the cycle, the tool will orientate to the average of the measured
points unless the additive angle is used. In this case, the tool will orient to the
average plus the additive angle.

NCTS advanced cycles software

Machine (Controller) Part number Minimum version of
non-contact tool setting
software required

Fanuc Macro B / Mitsubishi Meldas 1 A-4012-1657 A-4012-0820-AL

Mazak 1 A-4013-0569 A-4013-0119-AK

Siemens 2 A-4014-0809 A-4014-0401-0T or
A-4014-0601-0U

Quote part number when ordering.

Notes:
1
Does not support spindle orientation cycle.
2
Supports TSM2 cycles only. Tool length setting to an intersection, probe collector and construction cycles are not supported.

TRS2 broken tool detection software for machining centres

Machine (Controller) Part number

Brother, Fanuc, Haas, Heidenhain, Mazak Matrix, Mazak Fusion 640, Okuma, Siemens A-5450-8701

Heidenhain 620/640 (with HMI) A-4014-0769

1.12 Probe software for machining centres

Probe software for multi-axis lathes and
multi‑tasking machines
Inspection software for multi-axis lathes and multi‑tasking
machines
Given the increasing prevalence of multi-tasking machines in the manufacturing industry, Renishaw has enhanced the functionality
of its Inspection software to enable it to be used for multi-axis machining tasks. The software can be set up – using a supplied
installation utility – to suit a machine tool’s configuration.

Cycle title and description Cycle title and description

XYZ surface measure Angled web/pocket measure
Used to measure a surface to Used to measure a web or
establish size or position. pocket feature using two vectored
measuring moves along the XY
axis. *

Web/pocket measure 3-point bore or boss measure

Used to measure a web or pocket Used to measure a bore or boss
feature using two measuring moves feature using three vectored
along the XY axis. measuring moves along the XY
axis. *

Bore/boss measure Stock allowance

Used to measure a bore or boss Used to measure an X, Y or
feature using four measuring moves Z surface at defined positions
along the XY axis. to establish the maximum and
minimum stock condition of the
surface. *

Angled surface measure using Multi-stylus calibration

XYZ inputs Several stylus ball configurations
Used to measure a surface feature can be calibrated and stored. *
using one vectored measuring
move along the XY axis. *

continued ...

* The availability of this cycle is package-dependent.

Probe software for multi-axis lathes and multi‑tasking machines 2.1

 Cycle title and description Cycle title and description
4th-axis measure C-axis find
Used to find the angle of a surface This cycle will take two readings
between two points. The 4th axis by moving the C axis. External
can then be rotated to compensate features can also be measured by
for the surface error. * moving the Z axis. *

Bore/boss on a PCD measure Feature-to-feature measure

Used to establish the pitch circle A no movement cycle that is used
diameter between a series of after two measuring cycles to
bores or bosses. * determine feature-to-feature data. *

Statistical process control (SPC) Angled XY surface (angle find)

cycle for tool offset updates measure
Can be used in conjunction with Used to measure an X-axis or
measuring cycles to control the Y-axis surface at two positions to
updating of tool offsets. An update establish the angular position of the
is based on the average value of a surface. *
sample of measurements. *

Protected position move Probe start

Used to protect the probe against Used to switch the probe on and
damage. It can also be used to open a print port in readiness for
detect misloaded components. printing results in subsequent
measuring cycles.

Probe stop * The availability of this cycle is package-dependent.

Used to switch the probe off and
close a print port.

Print program

On completion of each cycle it is possible to print the measured results via the RS232 port to a printer or computer with a suitable
communication interface.

2.2 Probe software for multi-axis lathes and multi‑tasking machines

Inspection software for multi-axis lathes and multi‑tasking machines
Machine (Controller) Part number GoProbe app Set and Inspect
support 1 support 2

Biglia Smart-Turn (Fanuc) A-4012-2120

Doosan MX series (Fanuc) A-4012-1016 3

DN Solutions SMX series (Fanuc) A-4012-1511 3

DMG MORI NT/MT/NTX machines (Fanuc) A-4012-0834 3
DMG MORI Y-axis lathes (Fanuc/Meldas) A-4012-1301 3
Fanuc/Meldas Y-axis lathes A-4012-1092 3

Haas Y-axis lathes A-4012-1309 3

Mazak Integrex e-Series lathes (Fusion 640 M Pro) A-4013-0083 3
Mazak e-Series, i-Series, j-Series, Vortex eV, Vortex iV (Smooth, Matrix, Matrix Nexus) A-4013-0106 3 
Mazak Integrex Mark IV lathes (Matrix) A-4013-0106 3
Mazak Y-axis lathes – Integrex (not e-series) (e.g. Multiplex, Quadrex), QTN-Y
(M Plus, Fusion 640 MT Pro) A-4013-0030 3
Mazak Y-axis lathes – not Integrex series (Smooth, Matrix) A-4013-0168 3
Nakamura Super NTX/NTJX/NTRX (Fanuc) A-4012-1074 3

Okuma Multus, Macturn, VTM – TL/TD mode, G131 SKIP (OSP P100, P200, P300) A-4016-1056 3 
Siemens 840D, SINUMERIK ONE – multi-tasking and Y-axis lathes (with optional HMI) 4 A-4014-0794

Siemens Y-axis lathe A-4014-0592

Tsugami TMA8 (Fanuc) A-4012-2023

Quote part number when ordering.

Notes:
1
See page 8.1 for minimum macro software requirements.
2
See page 7.2 for minimum macro software requirements.
3
Print option available – function dependent on controller.
4
For machines with a B-axis nodding head only; it does not support a turret lathe.

Probe software for multi-axis lathes and multi‑tasking machines 2.3

Contact tool setting software for multi-axis lathes and
multi‑tasking machines
Renishaw’s tool setting software for multi-axis lathes and multi-tasking machines can be installed and set up to suit each machine
tool’s configuration, via the supplied installation utility. It is possible to set tools manually or automatically. The manual tool setting
cycle is used to manually position the tool close to the stylus before setting a tool. The automatic tool setting cycle is used to position
the tool to the stylus automatically, as well as to set the tool.

Cycle title and description Cycle title and description

Turning tool measurement Milling tool measurement
Positions the insert adjacent to the Positions the tool adjacent to the
stylus using the tool nose vector stylus before measuring the length
before measuring the insert. or the length and diameter.

Broken tool detection

Used to check the length of a
rotating tool for a broken tool
condition.
The cycle also checks for a ‘long
tool’ condition in case the tool has
pulled out during machining.

2.4 Probe software for multi-axis lathes and multi‑tasking machines

Contact tool setting software for multi-axis lathes and multi‑tasking
machines

Milling and turning tool measurement cycles

Machine (Controller) Part number GoProbe app Set and Inspect
support 1 support 2

Fanuc/Meldas Y-axis lathes A-4012-0745 3

Mazak lathe-style/milling-style measurement, Integrex i-Series, j-Series (Smooth, Matrix) A-4013-0159 3

Nakamura A-4012-1651

Quote part number when ordering.

Notes:
1
See page 8.1 for minimum macro software requirements.
2
See page 7.2 for minimum macro software requirements.
3
These packages typically require additional applications support to adapt the software to the machines’ configuration. Contact
Renishaw for further advice before purchasing these packages.

Turning tool measurement cycles

These cycles are for turning tool measurement on a multi-tasking machine. Use alongside an NCTS or a rotating CTS package if
supplying a solution for all tool types.

Machine (Controller) Part number GoProbe app Set and Inspect

support 1 support 2

Fanuc Macro B (0M, 6M, 16-21M/i M, 10-15M, 15i M, 30-32i M) 3 4 A-4012-1516 5

Heidenhain (640) 34
A-4014-0724 5

Siemens (810D, 828D, 840D, SINUMERIK ONE) 3 4 6 7 A-4014-0735 5

Quote part number when ordering.

Notes:
1
See page 8.1 for minimum macro software requirements.
2
See page 7.2 for minimum macro software requirements.
3
These packages support the APC.
4
Lathe tool measurement element can be used in conjunction with the relevant non-contact tool setting package if desired.
5
These packages typically require additional applications support to adapt the software to the machines’ configuration. Contact
Renishaw for further advice before purchasing these packages.
6
The software is not supported on Siemens powerline controllers below version 5.0. Contact Renishaw support for earlier
versions.
7
Includes GUI option.

Probe software for multi-axis lathes and multi‑tasking machines 2.5

Non-contact tool setting software for multi-axis lathes and
multi‑tasking machines
The non-contact tool setter (NCTS) is best for applications where delicate tools are used and/or where a probe must not obstruct a
machine’s working envelope.

Cycle title and description Cycle title and description

Tool radius and diameter setting Cutting edge checking
Used to measure the effective Used to check for missing or
radius or diameter of a tool, damaged edges, or the distance
this cycle allows the radius and between minimum and maximum
diameter to be measured from edge. The Latch mode feature on
the positive side of the beam, the the NCi-6 must be enabled.
negative side of the beam, or both
sides of the beam.

Tool length and radius setting Temperature compensation

Used to measure the effective tracking
length and radius/diameter of a tool, Used to calibrate the NCTS
this cycle is particularly suitable system, this cycle should be run on
for tools such as face mills, end a regular basis during machining
mills, slot cutters, disk mill cutters, operations to compensate for any
dovetail cutters and boring tools. growth in the spindle axis and/
or radial measuring axis caused
by temperature changes in the
machine tool.
Broken tool detection – plunge
checking
Used to check for broken cutting
tools, this cycle uses a plunge
check to move the tool in and out of
the laser beam in the axis used for
length setting. The cycle can also
check for a ‘long tool’ condition in
case the tool has pulled out during
machining.

Non-contact tool setting software for multi-axis lathes and

multi‑tasking machines
Machine (Controller) Part number GoProbe app Set and Inspect
support 1 support 2
Doosan MX series (Fanuc) A-4012-1111

DMG MORI NT/MT series (Fanuc) A-4012-1020

Mazak Integrex e-Series lathes (Fusion 640M) A-4013-0092
Mazak Y-axis lathes (Fusion 640M) A-4013-0566
Mazak Integrex e-Series, i-Series, Vortex e (Smooth, Matrix, Matrix Nexus) A-4013-0123 
Mazak Integrex Mark IV lathes (Matrix) 3 A-4013-0123 
Nakamura A-4012-1826

Quote part number when ordering.

Notes:
1
See page 8.1 for minimum macro software requirements.
2
See page 7.2 for minimum macro software requirements.
3
Support for this machine model is limited to software versions up to and including version 0N.

2.6 Probe software for multi-axis lathes and multi‑tasking machines

Probe software for lathes
Inspection software for lathes
Inspection software for lathes is designed to provide operators with an effective way of setting work co-ordinate systems and
performing component inspection. The software can be easily set up to suit the machine tool configuration using the supplied
installation utility.

Cycle features include:

• Size control: Tool offsets can be corrected automatically.

• Position control: Work offsets can be updated for accurate component positioning.

• Measurement error: Can be stored in a spare tool offset.

• Tolerance band: Can be set to give an alarm if the feature is out of tolerance.

• Measurement results: Can be printed through the RS232 port to a printer or computer.

Cycle title and description Cycle title and description

XZ single-surface measure Web/pocket measure
(probe vertical) (probe vertical)
Used to measure a surface to Used to measure a web or pocket
establish the size or position of the feature, this cycle uses two
surface, this cycle is only used for measuring moves along the Z axis.
a stylus in the vertical orientation.

XZ single-surface measure Web/pocket measure

(probe horizontal) (probe horizontal)
Used to measure a surface to Used to measure a web or pocket
establish the size or position of feature, this cycle uses two
the surface, this cycle is only measuring moves along the X axis.
used for a stylus in the horizontal
orientation.

Probe software for lathes 3.1

Inspection software for lathes
Machine (Controller) Part number

Fanuc Macro A (0T MATE, A, B, C, F) A-4012-0477

Fanuc Macro B (B, C, F, 0T, 6T, 10-15T, 15i T, 16-21T/i T, 30-32i T) A-4012-0541 1 2

Haas A-4012-0874 1

Hitachi Seicos (Llll (L3), L10) A-4012-0612 1

Hitachi Hi-cell (Sigma 16, 18, Lambda L3, L10) A-4012-0843 1

Mazak QTN range (T-Plus, Fusion 640T) A-4013-0071 1

Mazak QTN range (Smooth, Matrix Nexus, Smart) A-4013-0137 1
Meldas (L64, L500) A-4013-0028 1

Num (750, 760, 1060) A-4012-0929

Okuma – basic cycles G30 SKIP (OSP U100L, P100L, P200L, P300L) A-4016-1047
Okuma – TL/TD mode, G131 SKIP (OSP P100L, P200L, P300L) A-4016-1056
Siemens (810, 820, 840, 850, 880) A-4014-0066
Siemens (840C) A-4014-0066
Siemens (810D, 828D, 840D, SINUMERIK ONE) 3 A-4014-0137
Yasnac (LX3) A-4014-0011
C-axis measure option

Fanuc Macro B (0T, 6T, 10-15T, 15i T, 16-21T/i T, 30-32i T) A-4012-0653

Special stand-alone package, compatible with Inspection software
(0T, 6T, 10-15T, 15i T, 16-21T/i T, 30-32i T) A-4012-0709

Quote part number when ordering.

Notes:
1
Print option available – function dependent on controller.
2
This includes C-axis cycles.
3
The software is not supported on Siemens powerline controllers below version 5.0. Contact Renishaw support for earlier
versions.

3.2 Probe software for lathes

Tool setting software for lathes
With Renishaw tool setting software for lathes it is possible to set tools manually or automatically. The manual tool setting cycle is
used to manually position the tool close to the stylus before setting a tool, and the automatic tool setting cycle is used to position the
tool to the stylus automatically, as well as to set the tool.

Cycle title and description Cycle title and description

Turning tool measurement Milling tool measurement
Positions the insert adjacent to the Positions the tool adjacent to the
stylus using the tool nose vector stylus before measuring the length
before measuring the insert. or the length and diameter.

Machine (Controller) Part number

Fanuc Macro A (0T MATE, A, B, C, F) A-4012-0530

Fanuc Macro B 2-axis / 3-axis (0T, 6T, 10-15T, 15iT, 16-21T/iT, 30-32iT) A-4012-0745

Haas A-4012-0877 1

Mazak QTN range (M Plus, Fusion 640T) A-4013-0066

Meldas 2-axis (M600, M700, M800) A-4013-0254
Meldas 3-axis (M600, M700, M800) A-4013-0250
Num (750, 760, 1060) A-4012-0961

Okuma (OSP P200, P300) A-4016-1099

Siemens (810, 820, 840, 850, 880) A-4014-0068
Siemens (840C) A-4014-0068
Siemens (810D, 828D, 840D, SINUMERIK ONE) 2 A-4014-0130
Siemens (802D, 808D) A-4014-0433

Quote part number when ordering.

Notes:
1
Manual or manual with automatic option.
2
The software is not supported on Siemens powerline controllers below version 5.0. Contact Renishaw support for earlier
versions.

Probe software for lathes 3.3

Productivity+™ Scanning Suite
Productivity+™ is the collective name for a family of closely integrated software packages for use with Renishaw touch-trigger probes
and the OSP60 scanning probe.

Productivity+™ Active Editor Pro

Productivity+ Active Editor Pro provides users with a simple-to-use environment for incorporating in-cycle measurement and
inspection probe routines into machining cycles, with no requirement for G-code programming experience.

Simply import a component solid model and select the required feature geometry to generate a probe path. Manual programming
options are available where no solid model exists.

Measurements, logic and updates may be added to existing NC machining code and then post processed to provide a single
comprehensive NC program containing metal cutting and component inspection operations.

Productivity+™ CNC plug-in

The Productivity+™ CNC plug-in is typically used with the OSP60 probe with SPRINT™ technology, recording absolute XYZ surface
position data with exceptional accuracy.

This on-machine software controls the OSP60 probe and the machine tool, providing significantly enhanced data processing and
analysis capability in comparison with traditional methods.

Close integration of controller and CNC plug-in is designed for automatic closed-loop process control to reduce operator intervention.

The software has its own online editor allowing measurement programs to be written and updated on the machine. Optionally,
programs can be created off-line using Productivity+ Active Editor Pro.

Prismatic feature measurement, including scanned circles and scanned planes, is supported as standard. Where inspection of more
complex component geometry is required, a series of application-specific toolkits and cycles, each focused on an individual task or
industry sector are available.

These specific software packages provide solutions for applications including high-speed measurement of blade sections, a
sub‑60 second health check to determine machine capability – perfect before machining high-value components – and fast and
accurate scanning of free-form surfaces.

The Productivity+ CNC plug-in can also be used in conjunction with the Inspection Plus for OSP60 software package.

For more information on toolkit functionality, see www.renishaw.com/toolkits.

4.1 Productivity+™ software

Cycle title and description Cycle title and description
Point 2D corner
Used to add surface point features Used to select and inspect two
to an inspection cycle in a single faces that form a non right-angle
axis or at any vector angle. Inspect corner.
free-form surfaces by creating Productivity+ Active Editor Pro
an inspection cycle comprising automatically detects whether the
multiple individual points. selected faces form an ‘internal’
or ‘external’ corner, based on the
angle between them.

Line 3D corner
Used to create a series of parallel Used to select and inspect three
points across a uniform surface. faces that form a right-angle
Probing location and direction are corner.
automatically determined based Selections can be made from
on the model face and edge XY, XZ, or YZ planes with the
highlighted during selection. orientation of the initially selected
face determining subsequent
selections.

Circle Web/pocket
Used to inspect bore, boss and Used to select and inspect raised
circle features. or recessed features that have
Productivity+ Active Editor Pro parallel edges.
automatically detects whether After initial face and edge
selected features are a bore, boss selection, Productivity+ Active
or arc. Editor Pro automatically
determines whether the feature
is a web or a pocket, and only
valid subsequent selections are
highlighted when the mouse is
Plane moved across the model.
Uses one of the available plane
types (3-point, rectangular or
radial) to inspect a uniform plane.
The number of points required
to select the plane, and the
editable feature characteristics,
are dependent on the plane type
selected.

Constructed features Machine Update

Perform inspection on point, line, Update machine data (work
circle, plane features that are co-ordinate system, tool geometry,
constructed using elements of machine variable, rotation) based
other measured features, rather on inspected feature information.
than component solid model
geometry.
Scanned circles Scanned planes
Used to scan bore, boss, circle Used to scan linear or circular
and arc features. Productivity+ planar surfaces.
Active Editor Pro automatically Only available when programming
detects whether selected features for the OSP60 probe.
are a bore, boss, circle or arc.
Only available when programming
for the OSP60 probe.

Productivity+™ software 4.2

Productivity+™ software
Productivity+™ Active Editor Pro
Software Part number

Productivity+ Active Editor Pro A-4007-1400

Productivity+ Active Editor Pro SPRINT option 1 CS-SOF-SW-02-2015

ACIS CAD importer CS-SOF-SW-02-0010

Autodesk Inventor CAD importer CS-SOF-SW-02-0012

CATIA CAD importer CS-SOF-SW-02-0008

Pro/E CAD importer CS-SOF-SW-02-0007

SolidWorks CAD importer CS-SOF-SW-02-0011

UG/NX CAD importer CS-SOF-SW-02-0009

All CAD importers CS-SOF-SW-02-0005

Quote part number when ordering.

Note:
1
Required to generate programs utilising the OSP60 scanning probe. Only compatible with the controllers listed in the
Productivity+ CNC plug-in table below.

Machine (Controller) Part number

Post processor Active Editor Pro and

post processor package

Brother (32B) A-4007-5900 A-5226-5027

Fanuc Macro B (0M, 6M, 15M, 16-21M, 10-15i, 16-21i, 30-32i) A-4007-5100 A-5226-5001

Haas A-4007-5200 A-5226-5002

Heidenhain (620/640) A-4007-7200 A-5226-5030
Heidenhain (426/430) A-4007-6900 A-5226-5028
Heidenhain (i530) A-4007-6000 A-5226-5010
Hitachi Seicos (Sigma 10M, 6M, 18M, Lambda) A-4007-5300 A-5226-5003

Hurco (Winmax) A-4007-6800 A-5226-5026

Makino (Pro3, Pro5, Pro6) A-4007-5400 A-5226-5004

Mazak (M32, Mplus, Fusion 640M, Matrix) A-4007-5500 A-5226-5005

Mazak mill-turn (iSeries) A-4007-7100 A-5226-5029

Mitsubishi Meldas (M3, 310, 320, 335, M500, M600, M730) A-4007-5600 A-5226-5006

Mori Seiki (MSC-500 Series, MSC-800 Series) A-4007-6600 A-5226-5016

Okuma (OSP P200, OSP P300) A-4007-6300 A-5226-5013

Siemens (810D, 840D) A-4007-6700 A-5226-5017

Yasnac (I80 Series, X3 Series) A-4007-5700 A-5226-5007

Quote part number when ordering.

4.3 Productivity+™ software

Productivity+™ CNC plug-in (for OSP60 scanning applications)
Machine (Controller) Part number Inspection Plus
for OSP60

DMG MORI (Celos with Fanuc MAPPS (Fanuc Series 30i, 31i, 32i)) A-4007-1810 A-4012-2000

Fanuc (Series 30i, 31i, 32i) A-4007-1810 A-4012-2000

Makino (Pro5, Pro6 (Fanuc Series 30i, 31i, 32i)) A-4007-1810 A-4012-2000

Mazak (MATRIX 2, SmoothX, SmoothG, SmoothAi) A-4007-1830 A-4013-2000

Mitsubishi (Kitamura Arumatik-Mi) A-4007-1860

Okuma (OSP-P300MA, OSP-P300SA) A-4007-1840

Siemens (SINUMERIK 840D sl) A-4007-1800 A-4014-2000

Quote part number when ordering.

Productivity+™ Toolkits (suitable for all controllers that support the CNC
plug-in)
Software Part number

Freeform Surface Processor A-5750-2200

Freeform Surface Editor A-5750-2210

Blade Processor A-5750-2000

Blade Editor A-5750-2010

Adaptive Cut Processor A-5750-2260

Adaptive Cut Editor A-5750-2270

Machine Health Check Processor A-5750-2100

3D Feature Processor A-5750-2370

3D Feature Editor A-5750-2360

Best Fit Alignment Processor A-5750-2290

Best Fit Alignment Editor A-5750-2300

Productivity+™ Toolkit bundles 1

Software Part number

Freeform Surface A-5750-2250

Blade 2 A-5750-2050

Adaptive Cut 2
A-5750-2280

3D Feature 3 A-5750-2380

Best Fit Alignment 2

A-5750-2310

Quote part number when ordering.

Note:
1
Bundles include Editor and Processor software.
2
A licensed Freeform Surface installation is required to use this Toolkit.
3
3D Feature functionality is included in the Freeform Surface Toolkit as standard.

Productivity+™ software 4.4

SupaScan: ultra-fast point measurement and
scanning system for machining centres
SupaScan is an easy-to-use on-machine probing system capable of workpiece scanning and exceptionally fast point measurement.

Driven by SPRINT™ technology, SupaScan is the fastest on-machine probing solution for workpiece set-up, delivering significant
cycle time reduction on simple prismatic parts when compared with touch-trigger measurement solutions. The system can also be
used to determine form information – detecting defects that would be missed by touch-trigger systems – and for surface condition
monitoring, allowing issues such as excessive waviness, peaks, and steps on the surface to be identified, and corrections to be made
whilst the component is still in the machine.

The system can be programmed using the G-code macros supplied. More experienced users may wish to generate programs
manually to optimise these cycles to deliver further time savings; for example, adjusting standoff distance or feedrate, or
programming the most efficient tool path between measurement points.

Measurement results are output to machine variables and can be used to control downstream processes. For reporting purposes, the
optional Surface Reporter app provides a real-time, graphical representation of workpiece surface condition.

Available cycles and controller compatibility are listed in the tables below.

For more information, visit www.renishaw.com/supascan.

Cycle title and description Cycle title and description

CircleScan SurfaceCondition
Used to measure a bore or Measures surface condition by
boss feature. Bore scans are scanning a line.
performed in a clockwise direction; Detects and measures common
boss scans are performed in a defects such as excessive
counterclockwise direction. waviness, peaks, and steps on the
surface.

QuickPoint Calibration
Used to measure a point on a Used to perform a SupaScan probe
planar surface with cycle times calibration in 3D over a sphere.
significantly faster than traditional This cycle must be followed by a
touch-trigger systems. touch-trigger calibration cycle using
The cycle uses the analogue Inspection Plus for OSP60.
capability of the OSP60 probe to
achieve the fastest possible cycle
time from a touch point.
LineScan ProbeOnOff
Used to measure a planar or Switches the probe on and off and
angled line feature. selects the required operational
Determines high point/low mode of the system.
point error for form information
determining maximum and
minimum stock condition of the
surface.

5.1 SupaScan
SupaScan
Machine (Controller) Part number GoProbe app Set and Inspect Inspection Plus for
support 1 support 2 OSP60

Brother (CNC-C00) A-5465-4001 3  A-4012-2100

Fanuc (Series 0-21i MODEL A; Series 30-32i MODEL A; Series 0-3xi
MODEL B) A-5465-4001 3   A-4012-2000
Haas (NGC) A-5465-4001 3 Contact your local
Renishaw representative for
assistance.

Mazak (SmoothX) A-5465-4001 3   A-4013-2000

Siemens (SINUMERIK 840D sl and 828D) A-5465-4001 3

 A-4014-2000

Quote part number when ordering.

To view the controller requirements document applicable to your machine tool, visit www.renishaw.com/supascandownloads.

Notes:
1
See page 8.1 for minimum macro software requirements.
2
See page 7.2 for minimum macro software requirements.
3
SupaScan is delivered on a DPU-1 data processing unit containing master files for all supported controllers. A SupaScan kit
containing all required system hardware (DPU-1, probe, interface, receiver and cabling) is also available. To order, quote part
number A-5465-2000.

SupaScan 5.2
AxiSet™ Check-Up software for machine tools
AxiSet™ Check-Up is a cost-effective solution for checking and optimising kinematic performance. It takes just a few minutes to help
multi-axis machining centre and multi‑tasking machine users identify the poor machine alignment, geometry and pivot point errors
that can cause extended process-setting times and non‑conforming parts. Where possible, AxiSet Check-Up automatically updates
on-machine pivot point parameters.

By providing machine users with a fast and accurate health check of rotary axis pivot points, AxiSet Check-Up assists in building the
process foundation by maximising the stability of the environment and machine.

The AxiSet Check-Up app provides a detailed and graphical representation of the measurement data produced by the AxiSet
Check‑Up macro software. The app can help to make PASS or FAIL decisions based on defined tolerances. Machine performance
can be tracked over time, using the app’s historical data chart function.

The AxiSet Check-Up app is installed onto a PC or tablet running Windows 10 (32 or 64 bit) or above. The AxiSet Check-Up app
must be licensed before it can be used. Perpetual and evaluation licences are available.

NOTES: For prerequisites, see the table on page 6.2.

AxiSet Check-Up packages must be sold with on-site engineering support. Contact your local Renishaw office for more
information.

6.1 AxiSet™ Check-Up software

AxiSet Check-Up macro software
Machine (Controller) Auto Auto Part number Inspection Plus
update calculation 1
requirements

Brother (32B(B00), 32C(C00), 32D(D00))  A-5642-4161 A-4012-1028-0M

DMG MORI table/table (Fanuc/Meldas)  A-5642-4401 2

DMG MORI NT/MT machines (Fanuc/Meldas)  A-5642-4405 2
Doosan/DN Solutions MX/SMX A-5642-4711 2
Fanuc/Meldas, table/table  A-5642-4120 3 A-4012-0516-0V
Fanuc/Meldas, head/table  A-5642-4148 3 A-4012-0516-0V
Fanuc/Meldas, head/head  A-5642-4144 3 A-4012-0516-0V
Haas, table/table A-5642-4611 2
Haas NGC, table/table  A-5642-4616 2
Heidenhain, table/table (i530 (no GUI))  A-5642-4135 2 N/A
Heidenhain, head/table (i530 (no GUI))  A-5642-4130 2 N/A
Heidenhain, table/table (620/640 (no GUI))  A-5642-4543 2 N/A
Hurco WinMax, table/table A-5642-4105 3 A-4012-1126-0F and
below
Mazak Integrex e-Series, i-Series (Matrix, Fusion) A-5642-4009 2
Mazak Integrex Mark IV lathes (Matrix) A-5642-4005 2
Mazak Variaxis (Matrix, Fusion) A-5642-4001 2
Okuma MU or 3+2 machine, table/table (OSP E100 to P300M)   A-5642-4210 2
Okuma MULTUS, MACTURN, VTM (OSP P200, P300L)  A-5642-4200 2
Siemens table/table (810D/840D, SINUMERIK ONE) 4
 A-5642-4501 2
Siemens head/table (810D/840D, SINUMERIK ONE) 4  A-5642-4523 3 A-4014-0356-0A
Siemens head/head (840D, SINUMERIK ONE) 4  A-5642-4519 2

Quote part number when ordering.

Notes:
1
Calculates the correct pivot points but does not automatically correct the machine.
2
These packages are standalone and do not require Inspection Plus. The program numbers have been altered to avoid other
Renishaw software.
3
Inspection Plus software must be installed on the CNC in order for AxiSet Check-Up to work. Contact your local Renishaw office
for more information and compatibility
4
The software is not supported on Siemens powerline controllers below version 5.0. Contact Renishaw support for earlier
versions.

AxiSet Check-Up app

Supported on a PC or tablet running Microsoft Windows 10 (32 or 64 bit) or above.

Part number

AxiSet Check-Up app (includes perpetual licence) A-5642-3001

AxiSet Check-Up app licence codes

This licence is activated using an activation code that is supplied to the user via email.

Licence code

Perpetual licence for the AxiSet Check-Up app. Typically used to upgrade an evaluation licence to perpetual use. CS-SOF-SW-02-AXISET

AxiSet™ Check-Up software 6.2

Inspection and tool setting GUIs
Renishaw graphical user interface (GUI) software packages provide user-friendly, intuitive environments which require minimal user
input to generate and select probing cycles.

With these seamlessly integrated machine tool probing apps, users of all levels of experience can take advantage of the many
benefits offered by Renishaw probing systems.

The packages are designed for use where Set and Inspect cannot be used.

GoProbe iHMI
The GoProbe iHMI is designed for use with the Fanuc iHMI interface.

Machine (Controller) Part number Prerequisites

Fanuc ROBODRILL (31i Model B/B5) A-4012-4000 DiB series or later edition
Fanuc ROBODRILL with software option for Fanuc Picture Executor (A02B-0326-R644,
A02B-0327-R644)
ROBODRILL Application (47HG) (version 16 or later)
Inspection Plus – A-4012-0516 (version AB or later)
Contact tool setting software – A-4012-0584 (version AF or later)
Non-contact tool setting software – A-4012-0820
Fanuc iHMI (15 in screens) A-4012-4003 iHMI interface with option for Fanuc Picture Executor.
For 0iMF-plus, iHMI version 07.0 (60X1) or later is required.
Inspection Plus – A-4012-0516 (version AB or later)
Contact tool setting software – A-4012-0584 (version AF or later)
Non-contact tool setting software – A-4012-0820

Quote part number when ordering.

GoProbe GUI for Mitsubishi M80/M800S

NOTE: This kit is for OEM, dealer and Mitsubishi installation only.

Machine (Controller) Part number Prerequisites

Mitsubishi M80, M830S, M850S 1 A-4012-4010 Software level C4 or higher. This includes Mitsubishi Interactive Cycle Insertion function for
milling machines.
Mitsubishi ICI installation file (to be obtained from Mitsubishi).
Parameter 8991 must be set to 1 to allow interactive cycles to be displayed.
Inspection Plus – A-4012-0516 (version AB or later)
Contact tool setting software – A-4012-0584 (version AF or later)
LTS (length tool setting) software – A-5475-8700-0G

Quote part number when ordering.

Note:
1
For Mitsubishi CNCs running Microsoft Windows® (M800W), Set and Inspect is recommended. See page 7.2.

7.1 Inspection and tool setting GUIs

On-machine apps
The on-machine apps are Windows®-based software applications to support
machine tool probing functionality. These on-machine apps consist of Set and
Inspect and Reporter and can be installed onto a Windows®-based CNC controller
or a Windows tablet connected to the CNC controller via Ethernet.

For more information, visit: www.renishaw.com/machinetoolapps.

On-machine apps hardware compatibility

Machine Part number Hardware supported

Set and Inspect Reporter Controller 1

Machine tool type

DN Solutions A-5999-2900 CUFOS VMCs, HMCs, SMX

Elliot Matsuura A-5999-2200 A-5999-4200 0i-B/C, 0i-D, 0i-F, 15i, 16i, 18i, 21i, 30i, 31i, 32i 3
VMCs, HMCs

Fanuc A-5999-1200 A-5999-4200 0i-B/C, 0i-D, 0i-F, 15i, 16i, 18i, 21i, 30i, 31i, 32i 3
VMCs, HMCs

Hartford (Fanuc) A-5999-1800 A-5999-4800 2 FHAP04 (Fanuc) VMCs, HMCs

Hartford (Mitsubishi) A-5999-1900 A-5999-4900 2

MHAP04 (Mitsubishi) VMCs, HMCs
Arumatik-Si Mitsubishi M730,
Innoserv A-5999-2000 A-5999-4500 VMCs, HMCs
Arumatik-Mi Mitsubishi M850
Arumatik-Si Mitsubishi M730,
Kitamura A-5999-1600 A-5999-4600 VMCs, HMCs
Arumatik-Mi Mitsubishi M850
Matsuura A-5999-2400 A-5999-4200 0i-B/C, 0i-D, 0i-F, 15i, 16i, 18i, 21i, 30i, 31i, 32i 3
VMCs, HMCs
MAZATROL Smooth Ai, SmoothX, SmoothG and VMCs, HMCs, VARIAXIS,
Mazak A-5999-1300 A-5999-4300
SmoothEz 4 INTEGREX e-V, e-H and i/j
Micro Dynamics A-5999-2600 A-5999-4500 Mitsubishi M800W VMCs, HMCs

Mitsubishi A-5999-1500 A-5999-4500 M80VW / M800VW VMCs, HMCs

Nakamura A-5999-2800 NT Smart X (Fanuc 31i) ST, NT, MX

VMCs, HMCs, Lathes, VTL,
Okuma A-5999-1400 A-5999-4400 OSP P300 5
MULTUS, MacTurn, VTM
Siemens A-5999-4700 SINUMERIK 840D sl with PCU50 6

Takumi A-5999-3000 A-5999-4200 0i-B/C, 0i-D, 0i-F, 15i, 16i, 18i, 21i, 30i, 31i, 32i 2
VMCs, HMCs

Tongtai A-5999-2100 A-5999-4200 0i-B/C, 0i-D, 0i-F, 15i, 16i, 18i, 21i, 30i, 31i, 32i 2
VMCs, HMCs

Quote part number when ordering.

Notes:
1
All controllers require minimum specification of .Net 4.6.1 and Windows 7 SP1.
2
Reporter must be installed separately (it is not automatically installed with the corresponding Set and Inspect installer).
3
Ethernet or HSSB enabled controller. Focas 1/2 library (API).
4
Mazak API must be installed.
5
Okuma THINC API (version 1.12 or later) or the OSP API Kit (kit includes THINC API) must be installed.
6
Windows OS. SINUMERIK INTEGRATE RUN MYHMI/3GL must be enabled.

Inspection and tool setting GUIs 7.2

Set and Inspect software compatibility
Machine Part number Minimum software version required 1

Inspection Plus Contact tool setting Non-contact tool AxiSet™ Inspection Plus
software setting software for OSP60 2

DN Solutions A-5999-2900
VMCs, HMCs A-4012-0516-AV A-4012-0584-AT A-4012-0820-AW
SMX A-4012-1511-0J

Elliot Matsuura A-5999-2200 A-4012-0516-AV A-4012-0584-AT A-4012-0820-AW

Fanuc A-5999-1200 A-4012-0516-AV A-4012-0584-AT A-4012-0820-AW A-4016-1051-0D A-4012-2000-0C

Hartford (Fanuc) A-5999-1800 A-4012-0516-AV A-4012-0584-AT A-4012-0820-AW

Hartford (Mitsubishi) A-5999-1900 A-4012-0516-AV A-4012-0584-AT A-4012-0820-AW

Innoserv A-5999-2000 A-4012-0516-AV A-4012-0584-AT A-4012-0820-AW

Kitamura A-5999-1600 A-4012-0516-AV A-4012-0584-AT A-4012-0820-AW A-5642-4120-0P

Matsuura A-5999-2400 A-4012-0516-AV A-4012-0584-AT A-4012-0820-AW

Mazak A-5999-1300
VMCs, HMCs A-4013-0112-AT A-4013-0133-AE A-4013-0119-AR A-4013-2000-0C
Variaxis A-4013-0112-AT A-4013-0133-AE A-4013-0119-AR A-4013-2000-0C
Integrex A-4013-0106-BD A-4013-0330-0B A-4013-0123-AK
(Advanced Measurement
System tool setting)

Micro Dynamics A-5999-2600 A-4012-0516-AV A-4012-0584-AT A-4012-0820-AW

Mitsubishi A-5999-1500 A-4012-0516-AV A-4012-0584-AT A-4012-0820-AW

Nakamura A-5999-2800 A-4012-1834-0C A-4012-1651-0D A-4012-1826-0D

Okuma A-5999-1400
VMCs A-4016-1035-AD A-4016-1039-0W A-4016-1051-0F
HMCs A-4016-1035-AD A-4016-1039-0W A-4016-1051-0F
Lathes A-4016-1056-0N
VTL A-4016-1056-0N
MULTUS A-4016-1056-0N A-5642-4200-0G
MacTurn A-4016-1056-0N A-5642-4200-0G
VTM A-4016-1056-0N A-5642-4200-0G
Takumi A-5999-3000 A-4012-0516-AV A-4012-0584-AT A-4012-0820-AW

Tongtai A-5999-2100 A-4012-0516-AV A-4012-0584-AT A-4012-0820-AW

Quote part number when ordering.

Note:
1
The appropriate macro software package must be installed on the machine prior to using Set and Inspect.
2
For use with SupaScan.

7.3 Inspection and tool setting GUIs

Reporter
Reporter is an easy-to-use, on-machine probing app for customers who wish to view
component measurement data on the CNC machine tool controller. The app is installed
onto a Windows®-based CNC controller or a Windows tablet connected to the controller via
Ethernet.

For more information, visit: www.renishaw.com/machinetoolapps.

Machine Part number Minimum software version required 1

Inspection Plus Contact tool setting software Non-contact tool setting software

Fanuc/Meldas A-5999-4200 A-4012-0516-AV A-4012-0584-AW A-4012-0820-AT

Hartford (Fanuc) A-5999-4800 A-4012-0516-AV A-4012-0584-AW A-4012-0820-AT

Hartford (Mitsubishi) A-5999-4900 A-4012-0516-AV A-4012-0584-AW A-4012-0820-AT

Kitamura A-5999-4600 A-4012-0516-AV A-4012-0584-AW A-4012-0820-AT

Mazak A-5999-4300
VMCs, HMCs A-4013-0112-AT A-4013-0133-AE A-4013-0119-AR
Variaxis A-4013-0112-AT A-4013-0133-AE A-4013-0119-AR
Integrex A-4013-0106-BD A-4013-0330-0B A-4013-0123-AK
(Advanced Measurement System tool
setting)
Mitsubishi A-5999-4500 A-4012-0516-AV A-4012-0584-AW A-4012-0820-AT

Okuma A-5999-4400 A-4016-1035-AD

VMCs A-4016-1035-AD A-4016-1039-0W A-4016-1051-0F
HMCs A-4016-1035-AD A-4016-1039-0W A-4016-1051-0F
Lathes A-4016-1056-0N
VTL A-4016-1056-0N
MULTUS A-4016-1056-0N
MacTurn VTM A-4016-1056-0N
Siemens A-5999-4700 A-4012-0356-0T A-4014-0601-AA

Quote part number when ordering.

Notes:
1
The appropriate macro software package must be installed on the machine prior to using Reporter.

Productivity+ Macro Mode support

Reporter can now be used in conjunction with Productivity+ Active Editor Pro for Macro Mode only (for touch trigger probes, not
OSP60)

Productivity+ Active Editor Pro v3.5 onwards is required to display measurement cycle results in Reporter (constructed cycles are not
currently supported).

Data export licensed option

Measurement data can be exported from Reporter by purchasing and activating the Data export licensed option. This option allows
users to export measurement data to a .csv file.

Exported data can be stored as part records for traceability, or imported into the user’s in-house quality analysis software, providing
manufacturers with valuable insights into their machining processes.

Licensed option Licence code

Data export CS-SOF-SW-02-REPR

Quote part number when ordering.

The Data export licensed option is activated using an activation code supplied to the user via email.

Inspection and tool setting GUIs 7.4

Smartphone apps for machine tool products
Smartphone apps provide information at a user’s fingertips in a simple, convenient format. Available globally in a wide range of
languages, Renishaw’s free-of-charge apps are ideal for both new and experienced users.

For more information, visit: www.renishaw.com/smartphoneapps.

Renishaw’s range of free-of-charge smartphone apps are available globally on the App Store™ and on GooglePlay.

Renishaw apps are available in China via Tencent and Huawei.

GoProbe app
The GoProbe app creates a probing routine with just a few quick taps. Simply select
the required cycle and populate the data entry fields. The result is a single-line
command that is entered into the CNC controller.

The table below lists the macro software packages supported by the GoProbe app.

Controller Recommended Minimum software version required

Inspection Plus
Inspection Plus Contact tool setting Non-contact tool Inspection Plus for
software version 1
software setting software OSP60 2

Brother A-4012-1028-0H A-4012-1028-0E A-4012-1007-0K A-4012-1035 A-4012-2100-0C

DMG MORI (Fanuc/Meldas) A-4012-0936-0U A-4012-0936-0M A-4012-0953

Fagor 8055 A-4016-0068-00

Fagor 8060 / 8065 / 8070 A-4016-0071-0D A-4016-0090

Fanuc/Meldas A-4012-0516-AE A-4012-0516-0M A-4012-0584-AF A-4012-0820 A-4012-2000-0C 3

Makino (Renishaw standard) A-4012-1611-0C A-4012-1611-0C A-4012-1580-0B A-4012-1615-0B

Makino (Singapore) A-4012-1611-0H A-4012-1611-0C

Mazak A-4013-0112-0T A-4013-0112-0T A-4013-0133-0Y A-4013-0119 A-4013-2000-0C

Mazak VTC-800 A-4013-0205-0J A-4013-0133-0Y A-4013-0119 A-4013-2000-0C

Okuma A-4016-1035-0W A-4016-1035-0W A-4016-1039-0U A-4016-1051-0D

Siemens A-4014-0356-0R A-4014-0356-0E A-4014-0396-0M A-4014-0401 A-4014-2000-0C

TOSNUC A-4012-0949-0F

Quote part number when ordering.

Notes:
1
Supports all functionality within the app.
2
For use with SupaScan.
3
Fanuc support only.

8.1 Smartphone apps

NC4 app
The NC4 app makes configuring and supporting the range of NC4 non-contact tool
setters simple. Engineers have a single point of reference for maintenance and
troubleshooting tasks at their fingertips.

The table below lists the macro software packages supported by the NC4 app.

Controller Minimum non-contact tool setting

software version required

Brother A-4012-1035-0F
DMG MORI (Fanuc/
A-4012-0953-0N
Meldas)
Fanuc/Meldas A-4012-0820-AH

Heidenhain A-4014-0672-0K

Makino A-4012-1615-0F

Mazak A-4013-0119-AE

Okuma A-4016-1051-0F

Siemens A-4014-0401-0P

Quote part number when ordering.

Probe Setup app

The Probe Setup app provides users with a simplified method of customising
their Renishaw probe settings that is faster and easier than following traditional
printed instructions.

All machine tool touch-trigger spindle probes that support Trigger Logic™ or
Opti‑Logic™ are supported by the app.

HP arms app
The HP arms app provides engineers with an interactive support app for the range
of Renishaw high-precision tool setting arms. The app makes system configuration,
maintenance and troubleshooting tasks simple with easy-to-follow animations and
step-by-step instructions.

Renishaw HPMA, HPMA-X, HPPA and HPRA tool setting arms are supported by the
app.

Smartphone apps 8.2

Legacy software
Although Renishaw’s legacy software products offer backward compatibility, the available functionality will be limited compared to
Renishaw’s newer machine tool software packages.

Inspection Plus software for machining centres

Inspection Plus is a totally integrated package of software that includes vector and angle measure options, print options (where this
controller option is available) and an extended range of cycles. It also includes one-touch or two-touch probing options, tool offset
compensation by percentage of error, and output data stored in an accessible variable stack.

Machine (Controller) RENGAGE™ probes only

(MP700, OMP400 and RMP600)

Part number Approximate memory

required (KB)
Haas A-4012-0890 46.5

Hitachi Seicos (Σ10, Σ16, Σ18, MIII (M3), Lambda) A-4012-0761 46.2

Mazak (M32, M Plus and Fusion 640M) 1

A-4013-0040 47.0

Mitsubishi Meldas (M3, M310, M320, M330, M335 series, M50, M500 series, M64, Magic 64, M600,
M700, M800 series) A-4012-0685 47.0

Okuma (OSP 5020M, 700M, 7000M) A-4016-1009

Siemens (810D, 828D, 840D) 2 A-4014-0362 3 72.0

Yasnac (MX3, J50, I80, J100, J300) A-4014-0104 3

49.0

Quote part number when ordering.

Notes:
1
EIA/ISO and Mazatrol compatible.
2
The software is not supported on Siemens powerline controllers below version 5.0. Contact Renishaw support for earlier
versions.
3
Print option available – function dependent on controller.

9.1 Legacy software

Inspection software for machining centres
Basic inspection and job set-up software with the ability to set work offsets, update tool offsets and print inspection results (where this
controller option is available). Suitable for use by an operator or part programmer.

Cycle features include:

• Size control: Tool offsets can be corrected automatically.

• Position control: Work offsets can be updated for accurate component positioning.

• Measurement error: Can be stored in a spare tool offset.

• Tolerance band: Can be set to give an alarm if the feature is out of tolerance.

• Measurement results: Can be printed out through the RS232 port to a printer or computer.

Machine (Controller) Part number Approximate memory

required (KB)

Fadal (32MP, CNC88, CNC88HS) A-4016-0036 24.0

Fanuc Macro A (0M MATE, 0MA, 0MB, 0MC) A-4012-0542 11.0

Fanuc Macro B (0M, 6M, 16-21M/iM, 30-32iM) A-4012-0496 13.8
Fanuc Macro B (10-15M, 15iM) A-4012-0540 13.8
GE (2000) A-4016-0057 5.8

Haas A-4012-0620 13.0

Heidenhain (TNC 151, 155, 351, 355 (A, B, BR, P, Q and QR series) 407, 415, 2500, 360) A-4014-0050 8.2

Heidenhain print option (Macro and PC utility) A-4014-0056 –

Mazak (M32, Fusion 640M (EIA/ISO offsets), M32, M Plus, Fusion 640M) 1
A-4013-0005 14.3

Mitsubishi Meldas (M3, M310, M320, M335, M500, M600, M700 series) A-4013-0005 14.3

Selca (S3000, S4000) A-4014-0092 13.0

Siemens (810, 820, 840, 850, 880, 840C) A-4014-0054 17.9

TOSNUC (600, 777, 800M) A-4012-0610 12.0

Yasnac (Yasnac MX2) A-4014-0009 2 12.0
Yasnac (Yasnac MX2 (Matsuura)) A-4014-0008 2 12.0
Yasnac (Yasnac MX3 (Matsuura using 3 user inputs)) A-4014-0006 2 16.0
Yasnac (Yasnac MX3, J50) A-4014-0016 2 13.0
Yasnac (I80, J100, J300 (Matsuura M80)) A-4014-0013 2 14.0

Quote part number when ordering.

Notes:
1
EIA/ISO and Mazatrol compatible.
2
Print option available – function dependent on controller.

Additions to Inspection software for machining centres

Several packages to enhance and extend the capabilities of the standard Inspection software, including vector measuring, angle
measurement and a 5-axis option. On completion of each cycle, it is possible to print out the feature size and position via the RS232
port to a printer or computer with a suitable communications interface.

Machine (Controller) Vector measurement Angle measurement

Part number Approximate memory Part number Approximate memory

required (KB) required (KB)
Fanuc Macro B (0M, 6M, 10-15M, 15i M,
16-21M/i M, 30-32i M) A-4012-0527 8.4 A-4012-0549 3.3
Yasnac (I80 (Matsuura M80)) A-4012-0527 8.4 – –
Quote part number when ordering.

Legacy software 9.2

Multi-axis Inspection software for machining centres
Measuring in G17, G18 or G19 planes.

Machine (Controller) Part number Approximate memory

required (KB)

Fanuc Macro B (0M, 16-21M/i M, 30-32i M) A-4012-0640 1 38.0

Fanuc Macro B (10-15M, 15i M) A-4012-0578 1 37.5
Siemens (810D, 840D) 2 A-4014-0147 1 71.0

Quote part number when ordering.

Notes:
1
Print option available – function dependent on controller.
2
The software is not supported on Siemens powerline controllers below version 5.0. Contact Renishaw support for earlier
versions.

Renishaw GUI software for Okuma OSP P200 controllers

Machine (Controller) Description Part number

Okuma machining centre (OSP P200M) Inspection/tool setting GUI 1

A-4016-1063

Okuma lathe/multi-tasking (OSP P200L) Inspection/AxiSet GUI 2 3 A-4016-1075

Quote part number when ordering.

Notes:
1
Requires the following macro software packages:
Inspection Plus (A-4016-1035-0L or higher).
Contact tool setting (A-4016-1039-0N or higher).
Non-contact tool setting (A-4016-1021).
2
Requires the following macro packages:
Inspection Plus (A-4016-1056-0E or higher).
AxiSet (A-5642-4201-0D or higher).
3
Requires XYZ gauging.

9.3 Legacy software

EasyProbe inspection software for machining centres
EasyProbe software for machining centres provides simple and fast job set-up and measuring routines that require minimal
programming skills.

Cycle features include:

• Position control: Work offsets can be updated for accurate component positioning.

• Measurement results/errors: Results and errors can be stored in a variable list.

• Angle find: The angle of a surface can be found to update a fourth axis or enable G68 co-ordinate rotation.

Machine (Controller) Part number Approximate memory

required (KB)

Fanuc Macro B (0M, 6M, 10-15M,15i M, 16-21M/i M, 30-32i M) A-4010-0001 6.0

Haas A-4010-0001 6.0

Mitsubishi Meldas (M3, M310, M320, M330, M520, M600, M700 series) A-4010-0001 6.0
Siemens (802D) A-4014-0348 10.0
Siemens (810D, 828D, 840D) 1 A-4014-0391 10.0
Yasnac (MX3, I80, J50, J100, J300) A-4010-0001 6.0

Quote part number when ordering.

Note:
1
The software is not supported on Siemens powerline controllers below version 5.0. Contact Renishaw support for earlier
versions.

EasySet software for machining centres

EasySet enables the operator to manually position the probe stylus at a suitable start position before running an inspection cycle,
thereby minimising programming requirements.

NOTE: Inspection Plus software must be installed on the machine controller prior to using EasySet cycles.

Machine (Controller) Part number Approximate memory

required (KB)

Haas A-4012-0899 1 2.5

Quote part number when ordering.

Note:
1
Print option available – function available on controller.

EasyCycle software for Mazak machines

EasyCycle is intended for people who are only familiar with Mazak’s conversational programming language (Mazatrol) and not
conversant with EIA/ISO programming. EasyCycle will select a probe, pre-position it, run a Renishaw measurement cycle and then
return it to a safe position.

NOTE: Inspection Plus software must be installed on the machine controller prior to using the EasyCycle software.

Machine (Controller) Part number Approximate memory

required (KB)

Mazak machining centres (Fusion 640M, Smooth and Matrix) A-4013-0273 11.0

Mazak Integrex machines e H, eV, i and j-series (Fusion 640M and Matrix) A-4013-0277 14.5

Quote part number when ordering.

Legacy software 9.4

Contact tool setting software for lathes
Machine (Controller) Part number Approximate memory
required (KB)

Fanuc Macro B (B,C,F) A-4012-0528 1 6.1

Quote part number when ordering.

Note:
1
Manual, or manual with automatic option.

9.5 Legacy software

www.renishaw.com/mtpsoftware #renishaw

+44 (0)1453 524524 [email protected]

© 2004–2023 Renishaw plc. All rights reserved. RENISHAW® and the probe symbol are registered trade marks of Renishaw plc.
Renishaw product names, designations and the mark ‘apply innovation’ are trade marks of Renishaw plc or its subsidiaries.
Other brand, product or company names are trade marks of their respective owners.
Renishaw plc. Registered in England and Wales. Company no: 1106260. Registered office: New Mills, Wotton-under-Edge, Glos, GL12 8JR, UK. Part no.: H-2000-2298-24-A
WHILE CONSIDERABLE EFFORT WAS MADE TO VERIFY THE ACCURACY OF THIS DOCUMENT AT PUBLICATION, ALL WARRANTIES,
CONDITIONS, REPRESENTATIONS AND LIABILITY, HOWSOEVER ARISING, ARE EXCLUDED TO THE EXTENT PERMITTED BY LAW. Issued: 06.2023